summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/mach-omap2/clockdomain.h4
-rw-r--r--arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c1
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c32
-rw-r--r--arch/arm/mach-shmobile/platsmp.c5
-rw-r--r--arch/arm/mach-ux500/board-mop500.c12
-rw-r--r--arch/arm/mach-ux500/timer.c2
-rw-r--r--arch/mips/pci/pci-lantiq.c4
-rw-r--r--arch/mn10300/include/asm/thread_info.h2
-rw-r--r--arch/powerpc/include/asm/hw_irq.h6
-rw-r--r--arch/powerpc/kernel/irq.c48
-rw-r--r--arch/powerpc/mm/numa.c2
-rw-r--r--arch/powerpc/platforms/cell/pervasive.c11
-rw-r--r--arch/powerpc/platforms/pseries/processor_idle.c17
-rw-r--r--arch/tile/kernel/backtrace.c9
16 files changed, 122 insertions, 36 deletions
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9854ff4279e0..11828e632532 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index f7b58609bad8..6227e9505c2d 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -31,12 +31,16 @@
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ * active whenever the MPU is active. True for interconnects and
+ * the WKUP clockdomains.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 839145e1cfbe..4972219653ce 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
+ .flags = CLKDM_ACTIVE_WITH_MPU,
};
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index c53425847493..7f2133abe7d3 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
.cm_inst = OMAP4430_PRM_WKUP_CM_INST,
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
};
static struct clockdomain emu_sys_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 773193670ea2..2d710f50fca2 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle. If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby. No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
+ bool clkdm_act;
if (!oh->class->sysc)
return;
@@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh)
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+ clkdm_act = ((oh->clkdm &&
+ oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+ (oh->_clk && oh->_clk->clkdm &&
+ oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+ if (clkdm_act && !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+ HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh)
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+ /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index e859fcdb3d58..fde0d23121dc 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -22,8 +22,13 @@
#include <mach/common.h>
#include <mach/emev2.h>
+#ifdef CONFIG_ARCH_SH73A0
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
#define is_r8a7779() machine_is_marzen()
#ifdef CONFIG_ARCH_EMEV2
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 1509a3cb5833..4fd93f5c49ec 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -625,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
&ab8500_device,
};
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
- &snowball_led_dev,
- &snowball_key_dev,
-};
-
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
@@ -769,6 +764,11 @@ MACHINE_END
#ifdef CONFIG_MACH_UX500_DT
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+};
+
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
@@ -786,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
};
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 741e71feca78..66e7f00884ab 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -63,8 +63,10 @@ static void __init ux500_timer_init(void)
/* TODO: Once MTU has been DT:ed place code above into else. */
if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
np = of_find_matching_node(NULL, prcmu_timer_of_match);
if (!np)
+#endif
goto dt_fail;
tmp_base = of_iomap(np, 0);
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index ea453532a33c..075d87acd12a 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
@@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 08251d6f6b11..ac519bbd42ff 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void)
}
#ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 6eb75b80488c..0554ab062bdc 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void)
}
#ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory")
#else
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
@@ -125,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
return !regs->softe;
}
+extern bool prep_irq_for_idle(void);
+
#else /* CONFIG_PPC64 */
#define SET_MSR_EE(x) mtmsr(x)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1b415027ec0e..1f017bb7a7ce 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en)
*/
if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
else {
/*
* We should already be hard disabled here. We had bugs
@@ -286,6 +286,52 @@ void notrace restore_interrupts(void)
__hard_irq_enable();
}
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+ /*
+ * First we need to hard disable to ensure no interrupt
+ * occurs before we effectively enter the low power state
+ */
+ hard_irq_disable();
+
+ /*
+ * If anything happened while we were soft-disabled,
+ * we return now and do not enter the low power state.
+ */
+ if (lazy_irq_pending())
+ return false;
+
+ /* Tell lockdep we are about to re-enable */
+ trace_hardirqs_on();
+
+ /*
+ * Mark interrupts as soft-enabled and clear the
+ * PACA_IRQ_HARD_DIS from the pending mask since we
+ * are about to hard enable as well as a side effect
+ * of entering the low power state.
+ */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ local_paca->soft_enabled = 1;
+
+ /* Tell the caller to enter the low power state */
+ return true;
+}
+
#endif /* CONFIG_PPC64 */
int arch_show_interrupts(struct seq_file *p, int prec)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6e8f677f5646..1e95556dc692 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -639,7 +639,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
- struct assoc_arrays aa;
+ struct assoc_arrays aa = { .arrays = NULL };
n = of_get_drconf_memory(memory, &dm);
if (!n)
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index efdacc829576..d17e98bc0c10 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -42,11 +42,9 @@ static void cbe_power_save(void)
{
unsigned long ctrl, thread_switch_control;
- /*
- * We need to hard disable interrupts, the local_irq_enable() done by
- * our caller upon return will hard re-enable.
- */
- hard_irq_disable();
+ /* Ensure our interrupt state is properly tracked */
+ if (!prep_irq_for_idle())
+ return;
ctrl = mfspr(SPRN_CTRLF);
@@ -81,6 +79,9 @@ static void cbe_power_save(void)
*/
ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
mtspr(SPRN_CTRLT, ctrl);
+
+ /* Re-enable interrupts in MSR */
+ __hard_irq_enable();
}
static int cbe_system_reset_exception(struct pt_regs *regs)
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index e61483e8e960..c71be66bd5dc 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -99,15 +99,18 @@ out:
static void check_and_cede_processor(void)
{
/*
- * Interrupts are soft-disabled at this point,
- * but not hard disabled. So an interrupt might have
- * occurred before entering NAP, and would be potentially
- * lost (edge events, decrementer events, etc...) unless
- * we first hard disable then check.
+ * Ensure our interrupt state is properly tracked,
+ * also checks if no interrupt has occurred while we
+ * were soft-disabled
*/
- hard_irq_disable();
- if (!lazy_irq_pending())
+ if (prep_irq_for_idle()) {
cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Ensure that H_CEDE returns with IRQs on */
+ if (WARN_ON(!(mfmsr() & MSR_EE)))
+ __hard_irq_enable();
+#endif
+ }
}
static int dedicated_cede_loop(struct cpuidle_device *dev,
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
index 9092ce8aa6b4..f8b74ca83b92 100644
--- a/arch/tile/kernel/backtrace.c
+++ b/arch/tile/kernel/backtrace.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
+#include <asm/byteorder.h>
#include <asm/backtrace.h>
#include <asm/tile-desc.h>
#include <arch/abi.h>
@@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location,
bytes_to_prefetch / sizeof(tile_bundle_bits);
}
- /* Decode the next bundle. */
- bundle.bits = prefetched_bundles[next_bundle++];
+ /*
+ * Decode the next bundle.
+ * TILE always stores instruction bundles in little-endian
+ * mode, even when the chip is running in big-endian mode.
+ */
+ bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
bundle.num_insns =
parse_insn_tile(bundle.bits, pc, bundle.insns);
num_info_ops = bt_get_info_ops(&bundle, info_operands);
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-04 13:27:23 +0100