diff options
Diffstat (limited to 'arch')
108 files changed, 1072 insertions, 1818 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db524e75c4a2..f1d9297b1050 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..4d26f2c52a75 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -70,12 +70,7 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif -ifeq ($(CONFIG_THUMB2_KERNEL),y) -# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode -$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") -else $(obj)/uImage: STARTADDR=$(LOADADDR) -endif $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 8b0de41c3dcb..78b508075161 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time .size _start, . - _start + .align + .type data,#object data: .word initrd_start @ source initrd address .word initrd_phys @ destination initrd address diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 9be21ba648cd..7193884ed8b0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0 * sort out different calling conventions */ .align + .arm @ Always enter in ARM state start: .type start,#function - .rept 8 + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .rept 6 ) + ARM( .rept 8 ) mov r0, r0 .endr @@ -135,6 +139,7 @@ start: .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address + THUMB( .thumb ) 1: mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer @@ -174,7 +179,8 @@ not_angel: ldr sp, [r0, #28] #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address - and r4, pc, #0xf8000000 + mov r4, pc + and r4, r4, #0xf8000000 add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size */ mov r1, #0x1e orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 + mov r2, pc + mov r2, r2, lsr #20 orr r1, r1, r2, lsl #20 add r0, r3, r2, lsl #2 str r1, [r0], #4 diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 772f95f1aecd..e6388dcd8cfa 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) unsigned int shift = (irq % 4) * 8; unsigned int cpu = cpumask_first(mask_val); u32 val; + struct irq_desc *desc; spin_lock(&irq_controller_lock); - irq_desc[irq].node = cpu; + desc = irq_to_desc(irq); + if (desc == NULL) { + spin_unlock(&irq_controller_lock); + return -EINVAL; + } + desc->node = cpu; val = readl(reg) & ~(0xff << shift); val |= 1 << (cpu + shift); writel(val, reg); @@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start) { - unsigned int max_irq, i; + unsigned int gic_irqs, irq_limit, i; u32 cpumask = 1 << smp_processor_id(); if (gic_nr >= MAX_GIC_NR) @@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Find out how many interrupts are supported. - */ - max_irq = readl(base + GIC_DIST_CTR) & 0x1f; - max_irq = (max_irq + 1) * 32; - - /* * The GIC only supports up to 1020 interrupt sources. - * Limit this to either the architected maximum, or the - * platform maximum. */ - if (max_irq > max(1020, NR_IRQS)) - max_irq = max(1020, NR_IRQS); + gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; /* * Set all global interrupts to be level triggered, active low. */ - for (i = 32; i < max_irq; i += 16) + for (i = 32; i < gic_irqs; i += 16) writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ - for (i = 32; i < max_irq; i += 32) + for (i = 32; i < gic_irqs; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); /* + * Limit number of interrupts registered to the platform maximum + */ + irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + if (WARN_ON(irq_limit > NR_IRQS)) + irq_limit = NR_IRQS; + + /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { + for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig new file mode 100644 index 000000000000..38cb7c985426 --- /dev/null +++ b/arch/arm/configs/at91rm9200_defconfig @@ -0,0 +1,341 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_MACH_ONEARM=y +CONFIG_ARCH_AT91RM9200DK=y +CONFIG_MACH_AT91RM9200EK=y +CONFIG_MACH_CSB337=y +CONFIG_MACH_CSB637=y +CONFIG_MACH_CARMEVA=y +CONFIG_MACH_ATEB9200=y +CONFIG_MACH_KB9200=y +CONFIG_MACH_PICOTUX2XX=y +CONFIG_MACH_KAFA=y +CONFIG_MACH_ECBAT91=y +CONFIG_MACH_YL9200=y +CONFIG_MACH_CPUAT91=y +CONFIG_MACH_ECO920=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +# CONFIG_ARM_THUMB is not set +CONFIG_PCCARD=y +CONFIG_AT91_CF=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_TUN=m +CONFIG_PHYLIB=y +CONFIG_DAVICOM_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=32 +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_GPIO_SYSFS=y +CONFIG_HWMON=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_S1D13XXX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_MCT_U232=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_REISERFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_SMB_FS=m +CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig deleted file mode 100644 index 4438e64f3bfb..000000000000 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_ECO920=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig deleted file mode 100644 index ccd517c64bc7..000000000000 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_AT91RM9200EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_S1D13XXX=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig deleted file mode 100644 index 1b0e9a1689bb..000000000000 --- a/arch/arm/configs/ateb9200_defconfig +++ /dev/null @@ -1,131 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_ATEB9200=y -CONFIG_PCCARD=m -CONFIG_AT91_CF=m -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRC16=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig deleted file mode 100644 index ac64dbd8a49c..000000000000 --- a/arch/arm/configs/carmeva_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_CARMEVA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_DNOTIFY is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig deleted file mode 100644 index 022aeb55b676..000000000000 --- a/arch/arm/configs/cpuat91_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CPUAT91=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig deleted file mode 100644 index a24c448840c4..000000000000 --- a/arch/arm/configs/csb337_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB337=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -# CONFIG_RTC_INTF_SYSFS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig deleted file mode 100644 index 98552adac5fb..000000000000 --- a/arch/arm/configs/csb637_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB637=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig deleted file mode 100644 index 6bb6abdcea8c..000000000000 --- a/arch/arm/configs/ecbat91_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ECBAT91=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_MAC80211=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig deleted file mode 100644 index 896dbe00dc6e..000000000000 --- a/arch/arm/configs/kafa_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KAFA=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig deleted file mode 100644 index 9f906a85f5c2..000000000000 --- a/arch/arm/configs/kb9202_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KB9200=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x10000000 -CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig deleted file mode 100644 index 1579857aeeaa..000000000000 --- a/arch/arm/configs/onearm_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ONEARM=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig deleted file mode 100644 index 4c9afa478d57..000000000000 --- a/arch/arm/configs/picotux200_defconfig +++ /dev/null @@ -1,242 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_PICOTUX2XX=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=m -CONFIG_HID=m -CONFIG_USB=m -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_AT91RM9200=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_AMIGA_PARTITION=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig deleted file mode 100644 index 30c537f61089..000000000000 --- a/arch/arm/configs/yl9200_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_YL9200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=3 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SLUB_DEBUG_ON=y -CONFIG_DEBUG_KOBJECT=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index c09e3573c5de..bb96a7d4bbf5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - ldr r7, =1f @ it's 20 bits + ldr r7, 1f @ it's 20 bits swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} 1: .word __ARM_NR_cmpxchg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index dd6b369ac69c..6bd82d25683c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -85,9 +85,11 @@ ENTRY(stext) mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_a @ yes, error 'a' bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -262,6 +264,7 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg + .align __enable_mmu_loc: .long . .long __enable_mmu @@ -282,6 +285,7 @@ ENTRY(secondary_startup) bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p /* @@ -308,6 +312,8 @@ ENTRY(__secondary_switched) b secondary_start_kernel ENDPROC(__secondary_switched) + .align + .type __secondary_data, %object __secondary_data: .long . @@ -413,6 +419,7 @@ __fixup_smp_on_up: mov pc, lr ENDPROC(__fixup_smp) + .align 1: .word . .word __smpalt_begin .word __smpalt_end diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index fd26f8d65151..9cf4cbf8f95b 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -59,6 +59,8 @@ relocate_new_kernel: ldr r2,kexec_boot_atags mov pc,lr + .align + .globl kexec_start_address kexec_start_address: .long 0x0 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795f..62d686f0b426 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd7..7b539228e0ef 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fbf..8a3fc84847c1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a0..d2e1f4ec1fcc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592d..55dad3a46547 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) @@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -135,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c index e14f0e165680..4c1047c8200d 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-dk.c + * linux/arch/arm/mach-at91/board-rm9200dk.c * * Copyright (C) 2005 SAN People * @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 56e92c4bbc2a..9df1be8818c0 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-ek.c + * linux/arch/arm/mach-at91/board-rm9200ek.c * * Copyright (C) 2005 SAN People * @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f7..e0f0080eb639 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include <video/s1d13xxxfb.h> diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 58528aa9c8a8..2b499eb343a1 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); extern void __init at91_set_serial_console(unsigned portnr); -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 38088c36936c..78defd71a829 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void) { int i; - hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, + hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, "imprecise external abort"); for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a40457d81927..c85923e56b85 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> +#include <linux/console.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; + /* Block console output in case it is on one of the OMAP UARTs */ + if (try_acquire_console_sem()) + goto no_sleep; + omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); omap_uart_prepare_idle(2); @@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); + release_console_sem(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 75c0cd13ad8e..0ec8a04b7473 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/console.h> #include <plat/sram.h> #include <plat/clockdomain.h> @@ -385,6 +386,12 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } + /* Block console output in case it is on one of the OMAP UARTs */ + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); @@ -463,6 +470,9 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } + release_console_sem(); + +console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e38ef7e..d17960a1be25 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/serial_8250.h> #include <linux/pm_runtime.h> +#include <linux/console.h> #ifdef CONFIG_SERIAL_OMAP #include <plat/omap-serial.h> @@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num) { + if (num == uart->num && uart->can_sleep) { omap_uart_enable_clocks(uart); /* Check for IO pad wakeup */ @@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port) oh->dev_attr = uart; + acquire_console_sem(); /* in case the earlycon is on the UART */ + /* * Because of early UART probing, UART did not get idled * on init. Now that omap_device is ready, ensure full idle @@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; + release_console_sem(); + if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { device_init_wakeup(&od->pdev.dev, true); diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S index 4075473cf68a..b34be4554d40 100644 --- a/arch/arm/mach-realview/headsmp.S +++ b/arch/arm/mach-realview/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 8aa2f1902a94..6b86a722a7db 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) /* Configures BT serial port GPIOs */ s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index cef6a65637bd..fa2e5bffbb8e 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 87b9c9f003bd..27b3e7c9d613 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -35,9 +35,12 @@ menu "S3C2416 Machines" config MACH_SMDK2416 bool "SMDK2416" select CPU_S3C2416 + select MACH_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST select S3C2416_PM if PM help Say Y here if you are using an SMDK2416 diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 084d121f368c..00174daf1526 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = { static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) { - s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); + s3c2416_irq_demux(IRQ_S3C2443_RX3, 3); } #define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) static void s3c2416_irq_uart3_mask(unsigned int irqno) { diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index ff024a6c0f85..a0cb2581894f 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -18,6 +18,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool select CPU_ARM920T + select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK select S3C2410_GPIO select S3C2410_PM if PM @@ -178,6 +179,9 @@ config MACH_MINI2440 bool "MINI2440 development board" select CPU_S3C2440 select EEPROM_AT24 + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGER select LEDS_TRIGGER_BACKLIGHT select S3C_DEV_NAND select S3C_DEV_USB_HOST diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index d50f3ae6173d..f7663f731ea0 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -46,9 +46,6 @@ int __init s3c2440_init(void) { printk("S3C2440: Initialising architecture\n"); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; - /* change irq for watchdog */ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; @@ -58,3 +55,11 @@ int __init s3c2440_init(void) return sysdev_register(&s3c2440_sysdev); } + +void __init s3c2440_map_io(void) +{ + s3c244x_map_io(); + + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; +} diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 188ad1e57dc0..ecf813546554 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/mutex.h> +#include <linux/gpio.h> #include <linux/clk.h> #include <linux/io.h> @@ -43,6 +44,11 @@ #include <plat/clock.h> #include <plat/cpu.h> +#include <plat/s3c244x.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> /* S3C2442 extended clock support */ @@ -163,3 +169,11 @@ int __init s3c2442_init(void) return sysdev_register(&s3c2442_sysdev); } + +void __init s3c2442_map_io(void) +{ + s3c244x_map_io(); + + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down; +} diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 4fef723126fa..31babec90cec 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -5,6 +5,7 @@ config CPU_S3C2443 bool depends on ARCH_S3C2410 + select CPU_ARM920T select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 0e0d693f3974..893424767ce1 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = { static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) { - s3c2443_irq_demux(IRQ_S3C2443_UART3, 3); + s3c2443_irq_demux(IRQ_S3C2443_RX3, 3); } #define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - +#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) static void s3c2443_irq_uart3_mask(unsigned int irqno) { diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 249c62956471..89f35e02e883 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -45,7 +45,7 @@ #include <video/platform_lcd.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index f9ef9b5c5f5a..4957ab0a0d4a 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -46,7 +46,7 @@ #include <video/platform_lcd.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 0ad7924fe62e..5dd1681c069e 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/i2c.h> +#include <linux/sysdev.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bcd7a5d53401..1fbc45b2a432 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/sysdev.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index d3260542b943..d440e5f456ad 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) +static int __fsi_set_rate(struct clk *clk, long rate, int enable) +{ + int ret = 0; + + if (rate <= 0) + return ret; + + if (enable) { + ret = clk_set_rate(clk, rate); + if (0 == ret) + ret = clk_enable(clk); + } else { + clk_disable(clk); + } + + return ret; +} + +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} -static int fsi_set_rate(int is_porta, int rate) +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; + long fsib_rate = 0; + long fdiv_rate = 0; + int ackmd_bpfmd; int ret; - /* set_rate is not needed if port A */ - if (is_porta) - return 0; - - fsib_clk = clk_get(NULL, "fsib_clk"); - if (IS_ERR(fsib_clk)) - return -EINVAL; - switch (rate) { case 44100: - clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000)); - ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + fsib_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; break; case 48000: - clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000)); - clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000)); - ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ + fdiv_rate = rate * 256; + ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; break; default: pr_err("unsupported rate in FSI2 port B\n"); - ret = -EINVAL; - break; + return -EINVAL; } + /* FSI B setting */ + fsib_clk = clk_get(dev, "ickb"); + if (IS_ERR(fsib_clk)) + return -EIO; + + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); clk_put(fsib_clk); + if (ret < 0) + return ret; + + /* FSI DIV setting */ + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); + if (ret < 0) { + /* disable FSI B */ + if (enable) + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); + return ret; + } + + return ackmd_bpfmd; +} + +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); return ret; } @@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void) goto out; } + ret = clk_enable(&sh7372_pllc2_clk); + if (ret < 0) { + pr_err("Cannot enable pllc2 clock\n"); + goto out; + } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -896,23 +990,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index b25ce90a346e..3aa026069435 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -229,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate) if (idx < 0) return idx; - if (rate == clk->parent->rate) { - pllc2_disable(clk); - return 0; - } + if (rate == clk->parent->rate) + return -EINVAL; value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - if (value & 0x80000000) - pllc2_disable(clk); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); - if (value & 0x80000000) - return pllc2_enable(clk); - return 0; } @@ -452,10 +444,8 @@ static int fsidiv_enable(struct clk *clk) unsigned long value; value = __raw_readl(clk->mapping->base) >> 16; - if (value < 2) { - fsidiv_disable(clk); - return -ENOENT; - } + if (value < 2) + return -EIO; __raw_writel((value << 16) | 0x3, clk->mapping->base); @@ -466,17 +456,12 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate) { int idx; - if (clk->parent->rate == rate) { - fsidiv_disable(clk); - return 0; - } - idx = (clk->parent->rate / rate) & 0xffff; if (idx < 2) - return -ENOENT; + return -EINVAL; __raw_writel(idx << 16, clk->mapping->base); - return fsidiv_enable(clk); + return 0; } static struct clk_ops fsidiv_clk_ops = { @@ -607,8 +592,6 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]), CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]), - CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]), - CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]), CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]), CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]), @@ -645,8 +628,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ - CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */ - CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ + CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 8ea3bffb4e00..a0e7c12868bd 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -21,8 +21,8 @@ #include <mach/io.h> .macro addruart, rp, rv - ldreq \rp, =IO_APB_PHYS @ physical - ldrne \rv, =IO_APB_VIRT @ virtual + ldr \rp, =IO_APB_PHYS @ physical + ldr \rv, =IO_APB_VIRT @ virtual #if defined(CONFIG_TEGRA_DEBUG_UART_NONE) #error "A debug UART must be selected in the kernel config to use DEBUG_LL" #elif defined(CONFIG_TEGRA_DEBUG_UARTA) diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S index 8a78ff68e1ee..7a3f0632947c 100644 --- a/arch/arm/mach-vexpress/headsmp.S +++ b/arch/arm/mach-vexpress/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 53cbe2225153..9b9ff5d949fd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -381,7 +381,7 @@ __v7_ca9mp_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_ca9mp_setup + W(b) __v7_ca9mp_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS @@ -413,7 +413,7 @@ __v7_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_setup + W(b) __v7_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 85d3e55ca4a9..558cdfaf76b6 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -18,6 +18,7 @@ #include <linux/time.h> #include <linux/init.h> #include <linux/timex.h> +#include <linux/sched.h> #include <linux/io.h> #include <linux/clocksource.h> #include <linux/clockchips.h> @@ -36,7 +37,7 @@ /* * IOP clocksource (free-running timer 1). */ -static cycle_t iop_clocksource_read(struct clocksource *unused) +static cycle_t notrace iop_clocksource_read(struct clocksource *unused) { return 0xffffffffu - read_tcr1(); } diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h index e49c5b6fc4e2..1ab332e37d7d 100644 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -17,6 +17,9 @@ /* Require clock free running */ #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + /* * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI * @max_speed: the maximum speed supported diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 76d0858c3cbb..4a10c0f684b2 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440000, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2440_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, @@ -97,7 +97,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440001, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2440_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, @@ -106,7 +106,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440aaa, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2442_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, @@ -115,7 +115,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440aab, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2442_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 24c6f5a30596..243b6411050d 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -82,8 +82,6 @@ static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { .set_config = s3c_gpio_setcfg_s3c24xx, .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_1up, - .get_pull = s3c_gpio_getpull_1up, }; struct s3c_gpio_chip s3c24xx_gpios[] = { diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h index 307248d1ccbb..89e8d0a25f87 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h @@ -21,17 +21,22 @@ extern void s3c244x_init_clocks(int xtal); #else #define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL -#define s3c244x_map_io NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); + +extern void s3c2440_map_io(void); #else #define s3c2440_init NULL +#define s3c2440_map_io NULL #endif #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); + +extern void s3c2442_map_io(void); #else #define s3c2442_init NULL +#define s3c2442_map_io NULL #endif diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 9793544a6ace..704175b0573f 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index db9e9e477ec1..72457afd6255 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 8ea663a438bb..c3972b645d13 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, } else { s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index b732b773b9af..0aa32f242ee4 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -280,18 +280,17 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, } #endif -#ifdef CONFIG_S3C_GPIO_PULL_UP -int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) +#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN) +static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull, + s3c_gpio_pull_t updown) { void __iomem *reg = chip->base + 0x08; u32 pup = __raw_readl(reg); - pup = __raw_readl(reg); - - if (pup == S3C_GPIO_PULL_UP) + if (pull == updown) pup &= ~(1 << off); - else if (pup == S3C_GPIO_PULL_NONE) + else if (pull == S3C_GPIO_PULL_NONE) pup |= (1 << off); else return -EINVAL; @@ -300,17 +299,45 @@ int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, return 0; } -s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off) +static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t updown) { void __iomem *reg = chip->base + 0x08; u32 pup = __raw_readl(reg); pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; + return pup ? S3C_GPIO_PULL_NONE : updown; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */ + +#ifdef CONFIG_S3C_GPIO_PULL_UP +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); +} + +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); } #endif /* CONFIG_S3C_GPIO_PULL_UP */ +#ifdef CONFIG_S3C_GPIO_PULL_DOWN +s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); +} + +int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); +} +#endif /* CONFIG_S3C_GPIO_PULL_DOWN */ + #ifdef CONFIG_S5P_GPIO_DRVSTR s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) { diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 8fd65d8b5863..0d2c5703f1ee 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -210,6 +210,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, unsigned int off); /** + * s3c_gpio_getpull_1down() - Get configuration for choice of down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-down resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1down. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d66cead97d28..9897dcfc16d6 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -206,6 +206,7 @@ ENTRY(vfp_save_state) mov pc, lr ENDPROC(vfp_save_state) + .align last_VFP_context_address: .word last_VFP_context diff --git a/arch/mn10300/include/asm/syscall.h b/arch/mn10300/include/asm/syscall.h new file mode 100644 index 000000000000..b44b0bb75a01 --- /dev/null +++ b/arch/mn10300/include/asm/syscall.h @@ -0,0 +1,117 @@ +/* Access to user system call parameters and results + * + * See asm-generic/syscall.h for function descriptions. + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H + +#include <linux/sched.h> +#include <linux/err.h> + +extern const unsigned long sys_call_table[]; + +static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs) +{ + return regs->orig_d0; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + regs->d0 = regs->orig_d0; +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + unsigned long error = regs->d0; + return IS_ERR_VALUE(error) ? error : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->d0; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + regs->d0 = (long) error ?: val; +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + switch (i) { + case 0: + if (!n--) break; + *args++ = regs->a0; + case 1: + if (!n--) break; + *args++ = regs->d1; + case 2: + if (!n--) break; + *args++ = regs->a3; + case 3: + if (!n--) break; + *args++ = regs->a2; + case 4: + if (!n--) break; + *args++ = regs->d3; + case 5: + if (!n--) break; + *args++ = regs->d2; + case 6: + if (!n--) break; + default: + BUG(); + break; + } +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + switch (i) { + case 0: + if (!n--) break; + regs->a0 = *args++; + case 1: + if (!n--) break; + regs->d1 = *args++; + case 2: + if (!n--) break; + regs->a3 = *args++; + case 3: + if (!n--) break; + regs->a2 = *args++; + case 4: + if (!n--) break; + regs->d3 = *args++; + case 5: + if (!n--) break; + regs->d2 = *args++; + case 6: + if (!n--) break; + default: + BUG(); + break; + } +} + +#endif /* _ASM_SYSCALL_H */ diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index 0d5d63c91dc3..f28dc99c6f72 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -73,7 +73,8 @@ void gdbstub_io_init(void) GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI; /* permit level 0 IRQs to take place */ - local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); + arch_local_change_intr_mask_level( + NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index 97dfda23342c..abdeea153c89 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -87,7 +87,8 @@ void __init gdbstub_io_init(void) tmp = *gdbstub_port->_control; /* permit level 0 IRQs only */ - local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); + arch_local_change_intr_mask_level( + NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index a5fc3f05309b..b169d99d9f20 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -1194,7 +1194,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) asm volatile("mov mdr,%0" : "=d"(mdr)); local_save_flags(epsw); - local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); + arch_local_change_intr_mask_level( + NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); gdbstub_store_fpu(); diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 5024f643b3b1..d7d94b845dc2 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -75,9 +75,6 @@ static void cpu_unmask_irq(unsigned int irq) smp_send_all_nop(); } -void no_ack_irq(unsigned int irq) { } -void no_end_irq(unsigned int irq) { } - void cpu_ack_irq(unsigned int irq) { unsigned long mask = EIEM_MASK(irq); @@ -241,7 +238,7 @@ int cpu_claim_irq(unsigned int irq, struct irq_chip *type, void *data) /* for iosapic interrupts */ if (type) { - set_irq_chip_and_handler(irq, type, handle_level_irq); + set_irq_chip_and_handler(irq, type, handle_percpu_irq); set_irq_chip_data(irq, data); cpu_unmask_irq(irq); } @@ -392,7 +389,7 @@ static void claim_cpu_irqs(void) int i; for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) { set_irq_chip_and_handler(i, &cpu_interrupt_type, - handle_level_irq); + handle_percpu_irq); } set_irq_handler(TIMER_IRQ, handle_percpu_irq); diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 35c827e94e31..609a331878e7 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -98,7 +98,6 @@ void sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) { struct rt_sigframe __user *frame; - struct siginfo si; sigset_t set; unsigned long usp = (regs->gr[30] & ~(0x01UL)); unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; @@ -178,13 +177,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) give_sigsegv: DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = task_pid_vnr(current); - si.si_uid = current_uid(); - si.si_addr = &frame->uc; - force_sig_info(SIGSEGV, &si, current); + force_sig(SIGSEGV, current); return; } diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 2c7e801ab20b..6a3997f98dfb 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -92,7 +92,7 @@ static void pte_free_rcu_callback(struct rcu_head *head) static void pte_free_submit(struct pte_freelist_batch *batch) { - call_rcu(&batch->rcu, pte_free_rcu_callback); + call_rcu_sched(&batch->rcu, pte_free_rcu_callback); } void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift) diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index ac151399ef34..1995c1712fc8 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck); static int notrace s390_revalidate_registers(struct mci *mci) { int kill_task; - u64 tmpclock; u64 zero; void *fpt_save_area, *fpt_creg_save_area; @@ -214,11 +213,10 @@ static int notrace s390_revalidate_registers(struct mci *mci) : "0", "cc"); #endif /* Revalidate clock comparator register */ - asm volatile( - " stck 0(%1)\n" - " sckc 0(%1)" - : "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory"); - + if (S390_lowcore.clock_comparator == -1) + set_clock_comparator(S390_lowcore.mcck_clock); + else + set_clock_comparator(S390_lowcore.clock_comparator); /* Check if old PSW is valid */ if (!mci->wp) /* diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 56c8687b29b3..7eff9b7347c0 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -19,6 +19,7 @@ #include <linux/kernel_stat.h> #include <linux/rcupdate.h> #include <linux/posix-timers.h> +#include <linux/cpu.h> #include <asm/s390_ext.h> #include <asm/timer.h> @@ -566,6 +567,23 @@ void init_cpu_vtimer(void) __ctl_set_bit(0,10); } +static int __cpuinit s390_nohz_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + struct s390_idle_data *idle; + long cpu = (long) hcpu; + + idle = &per_cpu(s390_idle, cpu); + switch (action) { + case CPU_DYING: + case CPU_DYING_FROZEN: + idle->nohz_delay = 0; + default: + break; + } + return NOTIFY_OK; +} + void __init vtime_init(void) { /* request the cpu timer external interrupt */ @@ -574,5 +592,6 @@ void __init vtime_init(void) /* Enable cpu timer interrupts on the boot cpu. */ init_cpu_vtimer(); + cpu_notifier(s390_nohz_notify, 0); } diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 752b362bf651..7c37ec359ec2 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -29,17 +29,21 @@ static void __udelay_disabled(unsigned long long usecs) { unsigned long mask, cr0, cr0_saved; u64 clock_saved; + u64 end; + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + end = get_clock() + (usecs << 12); clock_saved = local_tick_disable(); - set_clock_comparator(get_clock() + (usecs << 12)); __ctl_store(cr0_saved, 0, 0); cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; __ctl_load(cr0 , 0, 0); - mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; lockdep_off(); - trace_hardirqs_on(); - __load_psw_mask(mask); - local_irq_disable(); + do { + set_clock_comparator(end); + trace_hardirqs_on(); + __load_psw_mask(mask); + local_irq_disable(); + } while (get_clock() < end); lockdep_on(); __ctl_load(cr0_saved, 0, 0); local_tick_enable(clock_saved); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1e905a632971..ef514c42eb4a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -22,7 +22,8 @@ config SUPERH select HAVE_SPARSE_IRQ select RTC_LIB select GENERIC_ATOMIC64 - select GENERIC_HARDIRQS_NO_DEPRECATED + # Support the deprecated APIs until MFD and GPIOLIB catch up. + select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index 4fa08ba10253..a8089f79d058 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -1,7 +1,7 @@ /* * Renesas Technology Europe RSK+ 7203 Support. * - * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,7 +12,9 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> +#include <linux/input.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> #include <linux/leds.h> #include <asm/machvec.h> #include <asm/io.h> @@ -84,9 +86,42 @@ static struct platform_device led_device = { }, }; +static struct gpio_keys_button rsk7203_gpio_keys_table[] = { + { + .code = BTN_0, + .gpio = GPIO_PB0, + .active_low = 1, + .desc = "SW1", + }, { + .code = BTN_1, + .gpio = GPIO_PB1, + .active_low = 1, + .desc = "SW2", + }, { + .code = BTN_2, + .gpio = GPIO_PB2, + .active_low = 1, + .desc = "SW3", + }, +}; + +static struct gpio_keys_platform_data rsk7203_gpio_keys_info = { + .buttons = rsk7203_gpio_keys_table, + .nbuttons = ARRAY_SIZE(rsk7203_gpio_keys_table), + .poll_interval = 50, /* default to 50ms */ +}; + +static struct platform_device keys_device = { + .name = "gpio-keys-polled", + .dev = { + .platform_data = &rsk7203_gpio_keys_info, + }, +}; + static struct platform_device *rsk7203_devices[] __initdata = { &smsc911x_device, &led_device, + &keys_device, }; static int __init rsk7203_devices_setup(void) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 673530500e27..527a0cd956b5 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -283,31 +283,6 @@ static struct platform_device ceu1_device = { }; /* FSI */ -/* - * FSI-A use external clock which came from ak464x. - * So, we should change parent of fsi - */ -#define FCLKACR 0xa4150008 -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimcka_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKACR, - .rate = 0, /* unknown */ -}; - /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | @@ -852,22 +827,14 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT0, NULL); /* enable FSI */ - gpio_request(GPIO_FN_FSIMCKB, NULL); gpio_request(GPIO_FN_FSIMCKA, NULL); + gpio_request(GPIO_FN_FSIIASD, NULL); gpio_request(GPIO_FN_FSIOASD, NULL); gpio_request(GPIO_FN_FSIIABCK, NULL); gpio_request(GPIO_FN_FSIIALRCK, NULL); gpio_request(GPIO_FN_FSIOABCK, NULL); gpio_request(GPIO_FN_FSIOALRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOAO, NULL); - gpio_request(GPIO_FN_FSIIBSD, NULL); - gpio_request(GPIO_FN_FSIOBSD, NULL); - gpio_request(GPIO_FN_FSIIBBCK, NULL); - gpio_request(GPIO_FN_FSIIBLRCK, NULL); - gpio_request(GPIO_FN_FSIOBBCK, NULL); - gpio_request(GPIO_FN_FSIOBLRCK, NULL); - gpio_request(GPIO_FN_CLKAUDIOBO, NULL); - gpio_request(GPIO_FN_FSIIASD, NULL); /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); @@ -879,10 +846,10 @@ static int __init devices_setup(void) /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); if (!IS_ERR(clk)) { - clk_register(&fsimcka_clk); - clk_set_parent(clk, &fsimcka_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimcka_clk, 11000); + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimcka_clk, 48000); + clk_set_parent(clk, &sh7724_fsimcka_clk); + clk_set_rate(clk, 48000); clk_put(clk); } diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h index 1f4e562c5e8c..82e1eabeac98 100644 --- a/arch/sh/include/asm/cacheflush.h +++ b/arch/sh/include/asm/cacheflush.h @@ -96,7 +96,7 @@ void kmap_coherent_init(void); void *kmap_coherent(struct page *page, unsigned long addr); void kunmap_coherent(void *kvaddr); -#define PG_dcache_dirty PG_arch_1 +#define PG_dcache_clean PG_arch_1 void cpu_cache_init(void); diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 2cfae81914aa..92eb98633ab0 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -114,7 +114,7 @@ static void sh4_flush_dcache_page(void *arg) struct address_space *mapping = page_mapping(page); if (mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); else #endif flush_cache_one(CACHE_OC_ADDRESS_ARRAY | @@ -239,7 +239,7 @@ static void sh4_flush_cache_page(void *args) * another ASID than the current one. */ map_coherent = (current_cpu_data.dcache.n_aliases && - !test_bit(PG_dcache_dirty, &page->flags) && + test_bit(PG_dcache_clean, &page->flags) && page_mapped(page)); if (map_coherent) vaddr = kmap_coherent(page, address); diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index f498da1cce7a..7729cca727eb 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -139,7 +139,7 @@ static void sh7705_flush_dcache_page(void *arg) struct address_space *mapping = page_mapping(page); if (mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); else __flush_dcache_page(__pa(page_address(page))); } diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c index ba401d137bb9..88d3dc3d30d5 100644 --- a/arch/sh/mm/cache.c +++ b/arch/sh/mm/cache.c @@ -60,14 +60,14 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page, unsigned long len) { if (boot_cpu_data.dcache.n_aliases && page_mapped(page) && - !test_bit(PG_dcache_dirty, &page->flags)) { + test_bit(PG_dcache_clean, &page->flags)) { void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); memcpy(vto, src, len); kunmap_coherent(vto); } else { memcpy(dst, src, len); if (boot_cpu_data.dcache.n_aliases) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); } if (vma->vm_flags & VM_EXEC) @@ -79,14 +79,14 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page, unsigned long len) { if (boot_cpu_data.dcache.n_aliases && page_mapped(page) && - !test_bit(PG_dcache_dirty, &page->flags)) { + test_bit(PG_dcache_clean, &page->flags)) { void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); memcpy(dst, vfrom, len); kunmap_coherent(vfrom); } else { memcpy(dst, src, len); if (boot_cpu_data.dcache.n_aliases) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); } } @@ -98,7 +98,7 @@ void copy_user_highpage(struct page *to, struct page *from, vto = kmap_atomic(to, KM_USER1); if (boot_cpu_data.dcache.n_aliases && page_mapped(from) && - !test_bit(PG_dcache_dirty, &from->flags)) { + test_bit(PG_dcache_clean, &from->flags)) { vfrom = kmap_coherent(from, vaddr); copy_page(vto, vfrom); kunmap_coherent(vfrom); @@ -141,7 +141,7 @@ void __update_cache(struct vm_area_struct *vma, page = pfn_to_page(pfn); if (pfn_valid(pfn)) { - int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); + int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags); if (dirty) __flush_purge_region(page_address(page), PAGE_SIZE); } @@ -153,7 +153,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr) if (pages_do_alias(addr, vmaddr)) { if (boot_cpu_data.dcache.n_aliases && page_mapped(page) && - !test_bit(PG_dcache_dirty, &page->flags)) { + test_bit(PG_dcache_clean, &page->flags)) { void *kaddr; kaddr = kmap_coherent(page, vmaddr); diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c index 15d74ea42094..ec29e14ec5a8 100644 --- a/arch/sh/mm/kmap.c +++ b/arch/sh/mm/kmap.c @@ -34,7 +34,7 @@ void *kmap_coherent(struct page *page, unsigned long addr) enum fixed_addresses idx; unsigned long vaddr; - BUG_ON(test_bit(PG_dcache_dirty, &page->flags)); + BUG_ON(!test_bit(PG_dcache_clean, &page->flags)); pagefault_disable(); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e8327686d3c5..e330da21b84f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -21,7 +21,7 @@ config X86 select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE - select HAVE_PERF_EVENTS if (!M386 && !M486) + select HAVE_PERF_EVENTS select HAVE_IRQ_WORK select HAVE_IOREMAP_PROT select HAVE_KPROBES diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 3ea3dc487047..6b89f5e86021 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -128,7 +128,7 @@ #define FAM10H_MMIO_CONF_ENABLE (1<<0) #define FAM10H_MMIO_CONF_BUSRANGE_MASK 0xf #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2 -#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffff +#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffffULL #define FAM10H_MMIO_CONF_BASE_SHIFT 20 #define MSR_FAM10H_NODE_ID 0xc001100c diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 18e3b8a8709f..ef9975812c77 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -824,27 +824,27 @@ static __always_inline void arch_spin_unlock(struct arch_spinlock *lock) #define __PV_IS_CALLEE_SAVE(func) \ ((struct paravirt_callee_save) { func }) -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl); } -static inline void arch_local_irq_restore(unsigned long f) +static inline notrace void arch_local_irq_restore(unsigned long f) { PVOP_VCALLEE1(pv_irq_ops.restore_fl, f); } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { PVOP_VCALLEE0(pv_irq_ops.irq_disable); } -static inline void arch_local_irq_enable(void) +static inline notrace void arch_local_irq_enable(void) { PVOP_VCALLEE0(pv_irq_ops.irq_enable); } -static inline unsigned long arch_local_irq_save(void) +static inline notrace unsigned long arch_local_irq_save(void) { unsigned long f; diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 7f7e577a0e39..31d84acc1512 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -11,6 +11,7 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src); void pvclock_read_wallclock(struct pvclock_wall_clock *wall, struct pvclock_vcpu_time_info *vcpu, struct timespec *ts); +void pvclock_resume(void); /* * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index e969f691cbfd..a501741c2335 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -199,6 +199,8 @@ union uvh_apicid { #define UVH_APICID 0x002D0E00L #define UV_APIC_PNODE_SHIFT 6 +#define UV_APICID_HIBIT_MASK 0xffff0000 + /* Local Bus from cpu's perspective */ #define LOCAL_BUS_BASE 0x1c00000 #define LOCAL_BUS_SIZE (4 * 1024 * 1024) @@ -491,8 +493,10 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) } } +extern unsigned int uv_apicid_hibits; static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode) { + apicid |= uv_apicid_hibits; return (1UL << UVH_IPI_INT_SEND_SHFT) | ((apicid) << UVH_IPI_INT_APIC_ID_SHFT) | (mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) | diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 6d90adf4428a..20cafeac7455 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -5,7 +5,7 @@ * * SGI UV MMR definitions * - * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_X86_UV_UV_MMRS_H @@ -754,6 +754,23 @@ union uvh_lb_bau_sb_descriptor_base_u { }; /* ========================================================================= */ +/* UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK */ +/* ========================================================================= */ +#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL +#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0 + +#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0 +#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL + +union uvh_lb_target_physical_apic_id_mask_u { + unsigned long v; + struct uvh_lb_target_physical_apic_id_mask_s { + unsigned long bit_enables : 32; /* RW */ + unsigned long rsvd_32_63 : 32; /* */ + } s; +}; + +/* ========================================================================= */ /* UVH_NODE_ID */ /* ========================================================================= */ #define UVH_NODE_ID 0x0UL diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index cefd6942f0e9..62f6e1e55b90 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -17,15 +17,16 @@ #include <linux/nmi.h> #include <linux/module.h> -/* For reliability, we're prepared to waste bits here. */ -static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; - u64 hw_nmi_get_sample_period(void) { return (u64)(cpu_khz) * 1000 * 60; } #ifdef ARCH_HAS_NMI_WATCHDOG + +/* For reliability, we're prepared to waste bits here. */ +static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; + void arch_trigger_all_cpu_backtrace(void) { int i; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 194539aea175..c1c52c341f40 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -44,6 +44,8 @@ static u64 gru_start_paddr, gru_end_paddr; static union uvh_apicid uvh_apicid; int uv_min_hub_revision_id; EXPORT_SYMBOL_GPL(uv_min_hub_revision_id); +unsigned int uv_apicid_hibits; +EXPORT_SYMBOL_GPL(uv_apicid_hibits); static DEFINE_SPINLOCK(uv_nmi_lock); static inline bool is_GRU_range(u64 start, u64 end) @@ -85,6 +87,23 @@ static void __init early_get_apic_pnode_shift(void) uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT; } +/* + * Add an extra bit as dictated by bios to the destination apicid of + * interrupts potentially passing through the UV HUB. This prevents + * a deadlock between interrupts and IO port operations. + */ +static void __init uv_set_apicid_hibit(void) +{ + union uvh_lb_target_physical_apic_id_mask_u apicid_mask; + unsigned long *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | + UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr)); + apicid_mask.v = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK; +} + static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { int nodeid; @@ -102,6 +121,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) __get_cpu_var(x2apic_extra_bits) = nodeid << (uvh_apicid.s.pnode_shift - 1); uv_system_type = UV_NON_UNIQUE_APIC; + uv_set_apicid_hibit(); return 1; } } @@ -155,6 +175,7 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri int pnode; pnode = uv_apicid_to_pnode(phys_apicid); + phys_apicid |= uv_apicid_hibits; val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | @@ -236,7 +257,7 @@ static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask) int cpu = cpumask_first(cpumask); if ((unsigned)cpu < nr_cpu_ids) - return per_cpu(x86_cpu_to_apicid, cpu); + return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits; else return BAD_APICID; } @@ -255,7 +276,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask, if (cpumask_test_cpu(cpu, cpu_online_mask)) break; } - return per_cpu(x86_cpu_to_apicid, cpu); + return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits; } static unsigned int x2apic_get_apic_id(unsigned long x) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ed6310183efb..6d75b9145b13 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -381,6 +381,20 @@ static void release_pmc_hardware(void) {} #endif +static bool check_hw_exists(void) +{ + u64 val, val_new = 0; + int ret = 0; + + val = 0xabcdUL; + ret |= checking_wrmsrl(x86_pmu.perfctr, val); + ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new); + if (ret || val != val_new) + return false; + + return true; +} + static void reserve_ds_buffers(void); static void release_ds_buffers(void); @@ -1372,6 +1386,12 @@ void __init init_hw_perf_events(void) pmu_check_apic(); + /* sanity check that the hardware exists or is emulated */ + if (!check_hw_exists()) { + pr_cont("Broken PMU hardware detected, software events only.\n"); + return; + } + pr_cont("%s PMU driver.\n", x86_pmu.name); if (x86_pmu.quirks) diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 59e175e89599..591e60104278 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -395,7 +395,7 @@ sysenter_past_esp: * A tiny bit of offset fixup is necessary - 4*4 means the 4 words * pushed above; +8 corresponds to copy_thread's esp0 setting. */ - pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp) + pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp) CFI_REL_OFFSET eip, 0 pushl_cfi %eax diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index fe2690d71c0c..e3ba417e8697 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -295,6 +295,7 @@ ENDPROC(native_usergs_sysret64) .endm /* save partial stack frame */ + .pushsection .kprobes.text, "ax" ENTRY(save_args) XCPT_FRAME cld @@ -334,6 +335,7 @@ ENTRY(save_args) ret CFI_ENDPROC END(save_args) + .popsection ENTRY(save_rest) PARTIAL_FRAME 1 REST_SKIP+8 diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index ff15c9dcc25d..42c594254507 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -433,6 +433,10 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args) dr6_p = (unsigned long *)ERR_PTR(args->err); dr6 = *dr6_p; + /* If it's a single step, TRAP bits are random */ + if (dr6 & DR_STEP) + return NOTIFY_DONE; + /* Do an early return if no trap bits are set in DR6 */ if ((dr6 & DR_TRAP_BITS) == 0) return NOTIFY_DONE; diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index 6da143c2a6b8..ac861b8348e2 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -25,7 +25,6 @@ struct pci_hostbridge_probe { }; static u64 __cpuinitdata fam10h_pci_mmconf_base; -static int __cpuinitdata fam10h_pci_mmconf_base_status; static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, @@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2) return start1 - start2; } -/*[47:0] */ -/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ +#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT) +#define MMCONF_MASK (~(MMCONF_UNIT - 1)) +#define MMCONF_SIZE (MMCONF_UNIT << 8) +/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */ #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) -#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) +#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40)) static void __cpuinit get_fam10h_pci_mmconf_base(void) { int i; @@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) struct range range[8]; /* only try to get setting from BSP */ - /* -1 or 1 */ - if (fam10h_pci_mmconf_base_status) + if (fam10h_pci_mmconf_base) return; if (!early_pci_allowed()) - goto fail; + return; found = 0; for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { @@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) } if (!found) - goto fail; + return; /* SYS_CFG */ address = MSR_K8_SYSCFG; @@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) /* TOP_MEM2 is not enabled? */ if (!(val & (1<<21))) { - tom2 = 0; + tom2 = 1ULL << 32; } else { /* TOP_MEM2 */ address = MSR_K8_TOP_MEM2; rdmsrl(address, val); - tom2 = val & (0xffffULL<<32); + tom2 = max(val & 0xffffff800000ULL, 1ULL << 32); } if (base <= tom2) - base = tom2 + (1ULL<<32); + base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK; /* * need to check if the range is in the high mmio range that is @@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) if (!(reg & 3)) continue; - start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/ reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/ - if (!end) + if (end < tom2) continue; range[hi_mmio_num].start = start; @@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) if (range[hi_mmio_num - 1].end < base) goto out; - if (range[0].start > base) + if (range[0].start > base + MMCONF_SIZE) goto out; /* need to find one window */ - base = range[0].start - (1ULL << 32); + base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT; if ((base > tom2) && BASE_VALID(base)) goto out; - base = range[hi_mmio_num - 1].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) + base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK; + if (BASE_VALID(base)) goto out; /* need to find window between ranges */ - if (hi_mmio_num > 1) - for (i = 0; i < hi_mmio_num - 1; i++) { - if (range[i + 1].start > (range[i].end + (1ULL << 32))) { - base = range[i].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - } + for (i = 1; i < hi_mmio_num; i++) { + base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK; + val = range[i].start & MMCONF_MASK; + if (val >= base + MMCONF_SIZE && BASE_VALID(base)) + goto out; } - -fail: - fam10h_pci_mmconf_base_status = -1; return; + out: fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; } void __cpuinit fam10h_check_enable_mmcfg(void) @@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void) /* only trust the one handle 256 buses, if acpi=off */ if (!acpi_pci_disabled || busnbits >= 8) { - u64 base; - base = val & (0xffffULL << 32); - if (fam10h_pci_mmconf_base_status <= 0) { + u64 base = val & MMCONF_MASK; + + if (!fam10h_pci_mmconf_base) { fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; return; } else if (fam10h_pci_mmconf_base == base) return; @@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void) * with 256 buses */ get_fam10h_pci_mmconf_base(); - if (fam10h_pci_mmconf_base_status <= 0) + if (!fam10h_pci_mmconf_base) { + pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF; return; + } printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) | diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 008b91eefa18..42eb3300dfc6 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src) static atomic64_t last_value = ATOMIC64_INIT(0); +void pvclock_resume(void) +{ + atomic64_set(&last_value, 0); +} + cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) { struct pvclock_shadow_time shadow; diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 12cdbb17ad18..6acc724d5d8f 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -223,7 +223,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask, static void __cpuinit calculate_tlb_offset(void) { - int cpu, node, nr_node_vecs; + int cpu, node, nr_node_vecs, idx = 0; /* * we are changing tlb_vector_offset for each CPU in runtime, but this * will not cause inconsistency, as the write is atomic under X86. we @@ -239,7 +239,7 @@ static void __cpuinit calculate_tlb_offset(void) nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes; for_each_online_node(node) { - int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) * + int node_offset = (idx % NUM_INVALIDATE_TLB_VECTORS) * nr_node_vecs; int cpu_offset = 0; for_each_cpu(cpu, cpumask_of_node(node)) { @@ -248,6 +248,7 @@ static void __cpuinit calculate_tlb_offset(void) cpu_offset++; cpu_offset = cpu_offset % nr_node_vecs; } + idx++; } } diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index d7b5109f7a9c..25cd4a07d09f 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -70,6 +70,9 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, struct xen_pci_frontend_ops *xen_pci_frontend; EXPORT_SYMBOL_GPL(xen_pci_frontend); +#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \ + MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0)) + static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq, struct msi_msg *msg) { @@ -83,12 +86,7 @@ static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq, MSI_ADDR_REDIRECTION_CPU | MSI_ADDR_DEST_ID(pirq); - msg->data = - MSI_DATA_TRIGGER_EDGE | - MSI_DATA_LEVEL_ASSERT | - /* delivery mode reserved */ - (3 << 8) | - MSI_DATA_VECTOR(0); + msg->data = XEN_PIRQ_MSI_DATA; } static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) @@ -98,8 +96,23 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) struct msi_msg msg; list_for_each_entry(msidesc, &dev->msi_list, list) { + __read_msi_msg(msidesc, &msg); + pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) | + ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff); + if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) { + xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ? + "msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ); + if (irq < 0) + goto error; + ret = set_irq_msi(irq, msidesc); + if (ret < 0) + goto error_while; + printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d" + " pirq=%d\n", irq, pirq); + return 0; + } xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ? - "msi-x" : "msi", &irq, &pirq); + "msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ)); if (irq < 0 || pirq < 0) goto error; printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq); diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index a318194002b5..ba9caa808a9c 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1455,7 +1455,7 @@ static void __init uv_init_uvhub(int uvhub, int vector) * the below initialization can't be in firmware because the * messaging IRQ will be determined by the OS */ - apicid = uvhub_to_first_apicid(uvhub); + apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits; uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, ((apicid << 32) | vector)); } diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c index 56e421bc379b..9daf5d1af9f1 100644 --- a/arch/x86/platform/uv/uv_time.c +++ b/arch/x86/platform/uv/uv_time.c @@ -89,6 +89,7 @@ static void uv_rtc_send_IPI(int cpu) apicid = cpu_physical_id(cpu); pnode = uv_apicid_to_pnode(apicid); + apicid |= uv_apicid_hibits; val = (1UL << UVH_IPI_INT_SEND_SHFT) | (apicid << UVH_IPI_INT_APIC_ID_SHFT) | (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT); @@ -107,6 +108,7 @@ static int uv_intr_pending(int pnode) static int uv_setup_intr(int cpu, u64 expires) { u64 val; + unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits; int pnode = uv_cpu_to_pnode(cpu); uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, @@ -117,7 +119,7 @@ static int uv_setup_intr(int cpu, u64 expires) UVH_EVENT_OCCURRED0_RTC1_MASK); val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) | - ((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT); + ((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT); /* Set configuration */ uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 02c710bebf7a..44dcad43989d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1021,10 +1021,6 @@ static void xen_reboot(int reason) { struct sched_shutdown r = { .reason = reason }; -#ifdef CONFIG_SMP - stop_other_cpus(); -#endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index a1feff9e59b6..44924e551fde 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2415,8 +2415,6 @@ void __init xen_init_mmu_ops(void) x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done; pv_mmu_ops = xen_mmu_ops; - vmap_lazy_unmap = false; - memset(dummy_mapping, 0xff, PAGE_SIZE); } diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c index 0f456386cce5..25c52f94a27c 100644 --- a/arch/x86/xen/platform-pci-unplug.c +++ b/arch/x86/xen/platform-pci-unplug.c @@ -68,7 +68,7 @@ static int __init check_platform_magic(void) return 0; } -void __init xen_unplug_emulated_devices(void) +void xen_unplug_emulated_devices(void) { int r; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 01afd8a94607..b5a7f928234b 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -181,24 +181,21 @@ char * __init xen_memory_setup(void) for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end = map[i].addr + map[i].size; - if (map[i].type == E820_RAM) { - if (map[i].addr < mem_end && end > mem_end) { - /* Truncate region to max_mem. */ - u64 delta = end - mem_end; + if (map[i].type == E820_RAM && end > mem_end) { + /* RAM off the end - may be partially included */ + u64 delta = min(map[i].size, end - mem_end); - map[i].size -= delta; - extra_pages += PFN_DOWN(delta); + map[i].size -= delta; + end -= delta; - end = mem_end; - } + extra_pages += PFN_DOWN(delta); } - if (end > xen_extra_mem_start) + if (map[i].size > 0 && end > xen_extra_mem_start) xen_extra_mem_start = end; - /* If region is non-RAM or below mem_end, add what remains */ - if ((map[i].type != E820_RAM || map[i].addr < mem_end) && - map[i].size > 0) + /* Add region if any remains */ + if (map[i].size > 0) e820_add_region(map[i].addr, map[i].size, map[i].type); } @@ -252,20 +249,6 @@ char * __init xen_memory_setup(void) return "Xen"; } -static void xen_idle(void) -{ - local_irq_disable(); - - if (need_resched()) - local_irq_enable(); - else { - current_thread_info()->status &= ~TS_POLLING; - smp_mb__after_clear_bit(); - safe_halt(); - current_thread_info()->status |= TS_POLLING; - } -} - /* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes @@ -362,7 +345,11 @@ void __init xen_arch_setup(void) MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ? COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE); - pm_idle = xen_idle; + /* Set up idle, making sure it calls safe_halt() pvop */ +#ifdef CONFIG_X86_32 + boot_cpu_data.hlt_works_ok = 1; +#endif + pm_idle = default_idle; fiddle_vdso(); } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 1d789d56877c..9bbd63a129b5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -31,6 +31,7 @@ void xen_hvm_post_suspend(int suspend_cancelled) int cpu; xen_hvm_init_shared_info(); xen_callback_vector(); + xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { for_each_online_cpu(cpu) { xen_setup_runstate_info(cpu); diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index b2bb5aa3b054..5da5e53fb94c 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -426,6 +426,8 @@ void xen_timer_resume(void) { int cpu; + pvclock_resume(); + if (xen_clockevent != &xen_vcpuop_clockevent) return; diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 64044747348e..9d41bf985757 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -43,7 +43,7 @@ void xen_vcpu_restore(void); void xen_callback_vector(void); void xen_hvm_init_shared_info(void); -void __init xen_unplug_emulated_devices(void); +void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); |