diff options
Diffstat (limited to 'arch')
188 files changed, 2293 insertions, 1753 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..84fda2bebd7a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -37,6 +37,9 @@ config ARM Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. +config ARM_HAS_SG_CHAIN + bool + config HAVE_PWM bool @@ -1346,7 +1349,6 @@ config SMP_ON_UP config HAVE_ARM_SCU bool - depends on SMP help This option enables support for the ARM system coherency unit @@ -1715,17 +1717,34 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. +choice + prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" + depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + default ZBOOT_ROM_NONE + help + Include experimental SD/MMC loading code in the ROM-able zImage. + With this enabled it is possible to write the the ROM-able zImage + kernel image to an MMC or SD card and boot the kernel straight + from the reset vector. At reset the processor Mask ROM will load + the first part of the the ROM-able zImage which in turn loads the + rest the kernel image to RAM. + +config ZBOOT_ROM_NONE + bool "No SD/MMC loader in zImage (EXPERIMENTAL)" + help + Do not load image from SD or MMC + config ZBOOT_ROM_MMCIF bool "Include MMCIF loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL help - Say Y here to include experimental MMCIF loading code in the - ROM-able zImage. With this enabled it is possible to write the - the ROM-able zImage kernel image to an MMC card and boot the - kernel straight from the reset vector. At reset the processor - Mask ROM will load the first part of the the ROM-able zImage - which in turn loads the rest the kernel image to RAM using the - MMCIF hardware block. + Load image from MMCIF hardware block. + +config ZBOOT_ROM_SH_MOBILE_SDHI + bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" + help + Load image from SDHI hardware block + +endchoice config CMDLINE string "Default kernel command string" diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 23aad0722303..0c74a6fab952 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,13 +6,19 @@ OBJS = -# Ensure that mmcif loader code appears early in the image +# Ensure that MMCIF loader code appears early in the image # to minimise that number of bocks that have to be read in # order to load it. ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) -ifeq ($(CONFIG_ARCH_SH7372),y) OBJS += mmcif-sh7372.o endif + +# Ensure that SDHI loader code appears early in the image +# to minimise that number of bocks that have to be read in +# order to load it. +ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y) +OBJS += sdhi-shmobile.o +OBJS += sdhi-sh7372.o endif AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index c943d2e7da9d..fe3719b516fd 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -25,14 +25,14 @@ /* load board-specific initialization code */ #include <mach/zboot.h> -#ifdef CONFIG_ZBOOT_ROM_MMCIF - /* Load image from MMC */ - adr sp, __tmp_stack + 128 +#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI) + /* Load image from MMC/SD */ + adr sp, __tmp_stack + 256 ldr r0, __image_start ldr r1, __image_end subs r1, r1, r0 ldr r0, __load_base - bl mmcif_loader + bl mmc_loader /* Jump to loaded code */ ldr r0, __loaded @@ -51,9 +51,9 @@ __loaded: .long __continue .align __tmp_stack: - .space 128 + .space 256 __continue: -#endif /* CONFIG_ZBOOT_ROM_MMCIF */ +#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ b 1f __atags:@ tag #1 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 940b20178107..e95a5989602a 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -353,7 +353,8 @@ not_relocated: mov r0, #0 mov r0, #0 @ must be zero mov r1, r7 @ restore architecture number mov r2, r8 @ restore atags pointer - mov pc, r4 @ call kernel + ARM( mov pc, r4 ) @ call kernel + THUMB( bx r4 ) @ entry point is always ARM .align 2 .type LC0, #object diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index 7453c8337b83..b6f61d9a5a1b 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -40,7 +40,7 @@ * to an MMC card * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 */ -asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) +asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) { mmc_init_progress(); mmc_update_progress(MMC_PROGRESS_ENTER); diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c new file mode 100644 index 000000000000..d403a8b24d7f --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -0,0 +1,95 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Kuninori Morimoto + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Parts inspired by u-boot + */ + +#include <linux/io.h> +#include <mach/mmc.h> +#include <linux/mmc/boot.h> +#include <linux/mmc/tmio.h> + +#include "sdhi-shmobile.h" + +#define PORT179CR 0xe60520b3 +#define PORT180CR 0xe60520b4 +#define PORT181CR 0xe60520b5 +#define PORT182CR 0xe60520b6 +#define PORT183CR 0xe60520b7 +#define PORT184CR 0xe60520b8 + +#define SMSTPCR3 0xe615013c + +#define CR_INPUT_ENABLE 0x10 +#define CR_FUNCTION1 0x01 + +#define SDHI1_BASE (void __iomem *)0xe6860000 +#define SDHI_BASE SDHI1_BASE + +/* SuperH Mobile SDHI loader + * + * loads the zImage from an SD card starting from block 0 + * on physical partition 1 + * + * The image must be start with a vrl4 header and + * the zImage must start at offset 512 of the image. That is, + * at block 1 (=byte 512) of physical partition 1 + * + * Use the following line to write the vrl4 formated zImage + * to an SD card + * # dd if=vrl4.out of=/dev/sdx bs=512 + */ +asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) +{ + int high_capacity; + + mmc_init_progress(); + + mmc_update_progress(MMC_PROGRESS_ENTER); + /* Initialise SDHI1 */ + /* PORT184CR: GPIO_FN_SDHICMD1 Control */ + __raw_writeb(CR_FUNCTION1, PORT184CR); + /* PORT179CR: GPIO_FN_SDHICLK1 Control */ + __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); + /* PORT181CR: GPIO_FN_SDHID1_3 Control */ + __raw_writeb(CR_FUNCTION1, PORT183CR); + /* PORT182CR: GPIO_FN_SDHID1_2 Control */ + __raw_writeb(CR_FUNCTION1, PORT182CR); + /* PORT183CR: GPIO_FN_SDHID1_1 Control */ + __raw_writeb(CR_FUNCTION1, PORT181CR); + /* PORT180CR: GPIO_FN_SDHID1_0 Control */ + __raw_writeb(CR_FUNCTION1, PORT180CR); + + /* Enable clock to SDHI1 hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); + + /* setup SDHI hardware */ + mmc_update_progress(MMC_PROGRESS_INIT); + high_capacity = sdhi_boot_init(SDHI_BASE); + if (high_capacity < 0) + goto err; + + mmc_update_progress(MMC_PROGRESS_LOAD); + /* load kernel */ + if (sdhi_boot_do_read(SDHI_BASE, high_capacity, + 0, /* Kernel is at block 1 */ + (len + TMIO_BBS - 1) / TMIO_BBS, buf)) + goto err; + + /* Disable clock to SDHI1 hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + + mmc_update_progress(MMC_PROGRESS_DONE); + + return; +err: + for(;;); +} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c new file mode 100644 index 000000000000..bd3d46980955 --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-shmobile.c @@ -0,0 +1,449 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Kuninori Morimoto + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Parts inspired by u-boot + */ + +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/mmc/core.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/tmio.h> +#include <mach/sdhi.h> + +#define OCR_FASTBOOT (1<<29) +#define OCR_HCS (1<<30) +#define OCR_BUSY (1<<31) + +#define RESP_CMD12 0x00000030 + +static inline u16 sd_ctrl_read16(void __iomem *base, int addr) +{ + return __raw_readw(base + addr); +} + +static inline u32 sd_ctrl_read32(void __iomem *base, int addr) +{ + return __raw_readw(base + addr) | + __raw_readw(base + addr + 2) << 16; +} + +static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val) +{ + __raw_writew(val, base + addr); +} + +static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val) +{ + __raw_writew(val, base + addr); + __raw_writew(val >> 16, base + addr + 2); +} + +#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \ + TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \ + TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \ + TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \ + TMIO_STAT_ILL_FUNC) + +static int sdhi_intr(void __iomem *base) +{ + unsigned long state = sd_ctrl_read32(base, CTL_STATUS); + + if (state & ALL_ERROR) { + sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR); + sd_ctrl_write32(base, CTL_IRQ_MASK, + ALL_ERROR | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return -EINVAL; + } + if (state & TMIO_STAT_CMDRESPEND) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_CMDRESPEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + if (state & TMIO_STAT_RXRDY) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + if (state & TMIO_STAT_DATAEND) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_DATAEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + + return -EAGAIN; +} + +static int sdhi_boot_wait_resp_end(void __iomem *base) +{ + int err = -EAGAIN, timeout = 10000000; + + while (timeout--) { + err = sdhi_intr(base); + if (err != -EAGAIN) + break; + udelay(1); + } + + return err; +} + +/* SDHI_CLK_CTRL */ +#define CLK_MMC_ENABLE (1 << 8) +#define CLK_MMC_INIT (1 << 6) /* clk / 256 */ + +static void sdhi_boot_mmc_clk_stop(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE & + sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); + msleep(10); +} + +static void sdhi_boot_mmc_clk_start(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE | + sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); + msleep(10); + sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE); + msleep(10); +} + +static void sdhi_boot_reset(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_RESET_SD, 0x0000); + msleep(10); + sd_ctrl_write16(base, CTL_RESET_SD, 0x0001); + msleep(10); +} + +/* Set MMC clock / power. + * Note: This controller uses a simple divider scheme therefore it cannot + * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as + * MMC wont run that fast, it has to be clocked at 12MHz which is the next + * slowest setting. + */ +static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios) +{ + if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY) + return -EBUSY; + + if (ios->clock) + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, + ios->clock | CLK_MMC_ENABLE); + + /* Power sequence - OFF -> ON -> UP */ + switch (ios->power_mode) { + case MMC_POWER_OFF: /* power down SD bus */ + sdhi_boot_mmc_clk_stop(base); + break; + case MMC_POWER_ON: /* power up SD bus */ + break; + case MMC_POWER_UP: /* start bus clock */ + sdhi_boot_mmc_clk_start(base); + break; + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0); + break; + case MMC_BUS_WIDTH_4: + sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0); + break; + } + + /* Let things settle. delay taken from winCE driver */ + udelay(140); + + return 0; +} + +/* These are the bitmasks the tmio chip requires to implement the MMC response + * types. Note that R1 and R6 are the same in this scheme. */ +#define RESP_NONE 0x0300 +#define RESP_R1 0x0400 +#define RESP_R1B 0x0500 +#define RESP_R2 0x0600 +#define RESP_R3 0x0700 +#define DATA_PRESENT 0x0800 +#define TRANSFER_READ 0x1000 + +static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd) +{ + int err, c = cmd->opcode; + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: c |= RESP_NONE; break; + case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1B: c |= RESP_R1B; break; + case MMC_RSP_R2: c |= RESP_R2; break; + case MMC_RSP_R3: c |= RESP_R3; break; + default: + return -EINVAL; + } + + /* No interrupts so this may not be cleared */ + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); + + sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(base, CTL_SD_CMD, c); + + + sd_ctrl_write32(base, CTL_IRQ_MASK, + ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) & + sd_ctrl_read32(base, CTL_IRQ_MASK)); + + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE); + + return 0; +} + +static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity, + unsigned long block, unsigned short *buf) +{ + int err, i; + + /* CMD17 - Read */ + { + struct mmc_command cmd; + + cmd.opcode = MMC_READ_SINGLE_BLOCK | \ + TRANSFER_READ | DATA_PRESENT; + if (high_capacity) + cmd.arg = block; + else + cmd.arg = block * TMIO_BBS; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + sd_ctrl_write32(base, CTL_IRQ_MASK, + ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY | + TMIO_STAT_TXUNDERRUN) & + sd_ctrl_read32(base, CTL_IRQ_MASK)); + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS); + for (i = 0; i < TMIO_BBS / sizeof(*buf); i++) + *buf++ = sd_ctrl_read16(base, RESP_CMD12); + + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + return 0; +} + +int sdhi_boot_do_read(void __iomem *base, int high_capacity, + unsigned long offset, unsigned short count, + unsigned short *buf) +{ + unsigned long i; + int err = 0; + + for (i = 0; i < count; i++) { + err = sdhi_boot_do_read_single(base, high_capacity, offset + i, + buf + (i * TMIO_BBS / + sizeof(*buf))); + if (err) + return err; + } + + return 0; +} + +#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34) + +int sdhi_boot_init(void __iomem *base) +{ + bool sd_v2 = false, sd_v1_0 = false; + unsigned short cid; + int err, high_capacity = 0; + + sdhi_boot_mmc_clk_stop(base); + sdhi_boot_reset(base); + + /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */ + { + struct mmc_ios ios; + ios.power_mode = MMC_POWER_ON; + ios.bus_width = MMC_BUS_WIDTH_1; + ios.clock = CLK_MMC_INIT; + err = sdhi_boot_mmc_set_ios(base, &ios); + if (err) + return err; + } + + /* CMD0 */ + { + struct mmc_command cmd; + msleep(1); + cmd.opcode = MMC_GO_IDLE_STATE; + cmd.arg = 0; + cmd.flags = MMC_RSP_NONE; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + msleep(2); + } + + /* CMD8 - Test for SD version 2 */ + { + struct mmc_command cmd; + cmd.opcode = SD_SEND_IF_COND; + cmd.arg = (VOLTAGES != 0) << 8 | 0xaa; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); /* Ignore error */ + if ((cmd.resp[0] & 0xff) == 0xaa) + sd_v2 = true; + } + + /* CMD55 - Get OCR (SD) */ + { + int timeout = 1000; + struct mmc_command cmd; + + cmd.arg = 0; + + do { + cmd.opcode = MMC_APP_CMD; + cmd.flags = MMC_RSP_R1; + cmd.arg = 0; + err = sdhi_boot_request(base, &cmd); + if (err) + break; + + cmd.opcode = SD_APP_OP_COND; + cmd.flags = MMC_RSP_R3; + cmd.arg = (VOLTAGES & 0xff8000); + if (sd_v2) + cmd.arg |= OCR_HCS; + cmd.arg |= OCR_FASTBOOT; + err = sdhi_boot_request(base, &cmd); + if (err) + break; + + msleep(1); + } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); + + if (!err && timeout) { + if (!sd_v2) + sd_v1_0 = true; + high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; + } + } + + /* CMD1 - Get OCR (MMC) */ + if (!sd_v2 && !sd_v1_0) { + int timeout = 1000; + struct mmc_command cmd; + + do { + cmd.opcode = MMC_SEND_OP_COND; + cmd.arg = VOLTAGES | OCR_HCS; + cmd.flags = MMC_RSP_R3; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + + msleep(1); + } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); + + if (!timeout) + return -EAGAIN; + + high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; + } + + /* CMD2 - Get CID */ + { + struct mmc_command cmd; + cmd.opcode = MMC_ALL_SEND_CID; + cmd.arg = 0; + cmd.flags = MMC_RSP_R2; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD3 + * MMC: Set the relative address + * SD: Get the relative address + * Also puts the card into the standby state + */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SET_RELATIVE_ADDR; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + cid = cmd.resp[0] >> 16; + } + + /* CMD9 - Get CSD */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SEND_CSD; + cmd.arg = cid << 16; + cmd.flags = MMC_RSP_R2; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD7 - Select the card */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SELECT_CARD; + //cmd.arg = rca << 16; + cmd.arg = cid << 16; + //cmd.flags = MMC_RSP_R1B; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD16 - Set the block size */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SET_BLOCKLEN; + cmd.arg = TMIO_BBS; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + return high_capacity; +} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h new file mode 100644 index 000000000000..92eaa09f985e --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-shmobile.h @@ -0,0 +1,11 @@ +#ifndef SDHI_MOBILE_H +#define SDHI_MOBILE_H + +#include <linux/compiler.h> + +int sdhi_boot_do_read(void __iomem *base, int high_capacity, + unsigned long offset, unsigned short count, + unsigned short *buf); +int sdhi_boot_init(void __iomem *base); + +#endif diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index ea80abe78844..4e728834a1b9 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -33,20 +33,24 @@ SECTIONS *(.text.*) *(.fixup) *(.gnu.warning) + *(.glue_7t) + *(.glue_7) + } + .rodata : { *(.rodata) *(.rodata.*) - *(.glue_7) - *(.glue_7t) + } + .piggydata : { *(.piggydata) - . = ALIGN(4); } + . = ALIGN(4); _etext = .; + .got.plt : { *(.got.plt) } _got_start = .; .got : { *(.got) } _got_end = .; - .got.plt : { *(.got.plt) } _edata = .; . = BSS_START; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 4ddd0a6ac7ff..7bdd91766d65 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -179,22 +179,21 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, { void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); unsigned int shift = (d->irq % 4) * 8; - unsigned int cpu = cpumask_first(mask_val); + unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; - if (cpu >= 8) + if (cpu >= 8 || cpu >= nr_cpu_ids) return -EINVAL; mask = 0xff << shift; bit = 1 << (cpu + shift); spin_lock(&irq_controller_lock); - d->node = cpu; val = readl_relaxed(reg) & ~mask; writel_relaxed(val | bit, reg); spin_unlock(&irq_controller_lock); - return 0; + return IRQ_SET_MASK_OK; } #endif diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index b4892a06442c..f4280593dfa3 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -26,8 +26,8 @@ #include <linux/compiler.h> #include <asm/system.h> -#define smp_mb__before_clear_bit() mb() -#define smp_mb__after_clear_bit() mb() +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() /* * These functions are the basis of our bit ops. diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 2da8547de6d6..2f1e2098dfe7 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -4,8 +4,8 @@ * Interrupt handling. Preserves r7, r8, r9 */ .macro arch_irq_handler_default - get_irqnr_preamble r5, lr -1: get_irqnr_and_base r0, r6, r5, lr + get_irqnr_preamble r6, lr +1: get_irqnr_and_base r0, r2, r6, lr movne r1, sp @ @ routine called with r0 = irq number, r1 = struct pt_regs * @@ -17,17 +17,17 @@ /* * XXX * - * this macro assumes that irqstat (r6) and base (r5) are + * this macro assumes that irqstat (r2) and base (r6) are * preserved from get_irqnr_and_base above */ - ALT_SMP(test_for_ipi r0, r6, r5, lr) + ALT_SMP(test_for_ipi r0, r2, r6, lr) ALT_UP_B(9997f) movne r1, sp adrne lr, BSYM(1b) bne do_IPI #ifdef CONFIG_LOCAL_TIMERS - test_for_ltirq r0, r6, r5, lr + test_for_ltirq r0, r2, r6, lr movne r0, sp adrne lr, BSYM(1b) bne do_local_timer @@ -40,7 +40,7 @@ .align 5 .global \symbol_name \symbol_name: - mov r4, lr + mov r8, lr arch_irq_handler_default - mov pc, r4 + mov pc, r8 .endm diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 7544ce6b481a..67c70a31a1be 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -52,7 +52,7 @@ reserve_pmu(enum arm_pmu_type device); * a cookie. */ extern int -release_pmu(struct platform_device *pdev); +release_pmu(enum arm_pmu_type type); /** * init_pmu() - Initialise the PMU. diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 8ec535e11fd7..633d1cb84d87 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -82,13 +82,13 @@ extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #else -#define cpu_proc_init() processor._proc_init() -#define cpu_proc_fin() processor._proc_fin() -#define cpu_reset(addr) processor.reset(addr) -#define cpu_do_idle() processor._do_idle() -#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) -#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) +#define cpu_proc_init processor._proc_init +#define cpu_proc_fin processor._proc_fin +#define cpu_reset processor.reset +#define cpu_do_idle processor._do_idle +#define cpu_dcache_clean_area processor.dcache_clean_area +#define cpu_set_pte_ext processor.set_pte_ext +#define cpu_do_switch_mm processor.switch_mm #endif extern void cpu_resume(void); diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index 2f87870d9347..cefdb8f898a1 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -1,6 +1,10 @@ #ifndef _ASMARM_SCATTERLIST_H #define _ASMARM_SCATTERLIST_H +#ifdef CONFIG_ARM_HAS_SG_CHAIN +#define ARCH_HAS_SG_CHAIN +#endif + #include <asm/memory.h> #include <asm/types.h> #include <asm-generic/scatterlist.h> diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee2ad8ae07af..915696dd9c7c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -187,12 +187,16 @@ struct tagtable { #define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } +static const struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description */ -#define NR_BANKS 8 +#ifdef CONFIG_ARCH_EP93XX +# define NR_BANKS 16 +#else +# define NR_BANKS 8 +#endif struct membank { phys_addr_t start; diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h new file mode 100644 index 000000000000..b0e4e1a02318 --- /dev/null +++ b/arch/arm/include/asm/suspend.h @@ -0,0 +1,22 @@ +#ifndef __ASM_ARM_SUSPEND_H +#define __ASM_ARM_SUSPEND_H + +#include <asm/memory.h> +#include <asm/tlbflush.h> + +extern void cpu_resume(void); + +/* + * Hide the first two arguments to __cpu_suspend - these are an implementation + * detail which platform code shouldn't have to know about. + */ +static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) +{ + extern int __cpu_suspend(int, long, unsigned long, + int (*)(unsigned long)); + int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); + flush_tlb_all(); + return ret; +} + +#endif diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h index 5929ef5d927a..8578d726ad78 100644 --- a/arch/arm/include/asm/tcm.h +++ b/arch/arm/include/asm/tcm.h @@ -27,5 +27,7 @@ void *tcm_alloc(size_t len); void tcm_free(void *addr, size_t len); +bool tcm_dtcm_present(void); +bool tcm_itcm_present(void); #endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index d2005de383b8..8077145698ff 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -34,16 +34,12 @@ #define TLB_V6_D_ASID (1 << 17) #define TLB_V6_I_ASID (1 << 18) -#define TLB_BTB (1 << 28) - /* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */ #define TLB_V7_UIS_PAGE (1 << 19) #define TLB_V7_UIS_FULL (1 << 20) #define TLB_V7_UIS_ASID (1 << 21) -/* Inner Shareable BTB operation (ARMv7 MP extensions) */ -#define TLB_V7_IS_BTB (1 << 22) - +#define TLB_BARRIER (1 << 28) #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -58,7 +54,7 @@ * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) - * fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB)) + * fa - Faraday (v4 with write buffer with UTLB) * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction * v7wbi - identical to v6wbi */ @@ -99,7 +95,7 @@ # define v4_always_flags (-1UL) #endif -#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \ +#define fa_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V4_U_FULL | TLB_V4_U_PAGE) #ifdef CONFIG_CPU_TLB_FA @@ -166,7 +162,7 @@ # define v4wb_always_flags (-1UL) #endif -#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V6_I_FULL | TLB_V6_D_FULL | \ TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ TLB_V6_I_ASID | TLB_V6_D_ASID) @@ -184,9 +180,9 @@ # define v6wbi_always_flags (-1UL) #endif -#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) -#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) #ifdef CONFIG_CPU_TLB_V7 @@ -341,15 +337,7 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_V7_UIS_FULL)) asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) { dsb(); isb(); } @@ -389,17 +377,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc"); #endif - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) dsb(); - isb(); - } } static inline void @@ -439,17 +418,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc"); #endif - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) dsb(); - isb(); - } } static inline void local_flush_tlb_kernel_page(unsigned long kaddr) @@ -482,15 +452,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_V7_UIS_PAGE)) asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) { dsb(); isb(); } diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index f90756dc16dc..5b29a6673625 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -3,6 +3,9 @@ #include <linux/list.h> +struct pt_regs; +struct task_struct; + struct undef_hook { struct list_head node; u32 instr_mask; diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 927522cfc12e..16baba2e4369 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -59,6 +59,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); +#ifdef CONFIG_SMP + DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu)); +#endif #ifdef CONFIG_ARM_THUMBEE DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 90c62cd51ca9..fa02a22a4c4b 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -29,21 +29,53 @@ #include <asm/entry-macro-multi.S> /* - * Interrupt handling. Preserves r7, r8, r9 + * Interrupt handling. */ .macro irq_handler #ifdef CONFIG_MULTI_IRQ_HANDLER - ldr r5, =handle_arch_irq + ldr r1, =handle_arch_irq mov r0, sp - ldr r5, [r5] + ldr r1, [r1] adr lr, BSYM(9997f) - teq r5, #0 - movne pc, r5 + teq r1, #0 + movne pc, r1 #endif arch_irq_handler_default 9997: .endm + .macro pabt_helper + @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5 +#ifdef MULTI_PABORT + ldr ip, .LCprocfns + mov lr, pc + ldr pc, [ip, #PROCESSOR_PABT_FUNC] +#else + bl CPU_PABORT_HANDLER +#endif + .endm + + .macro dabt_helper + + @ + @ Call the processor-specific abort handler: + @ + @ r2 - pt_regs + @ r4 - aborted context pc + @ r5 - aborted context psr + @ + @ The abort handler must return the aborted address in r0, and + @ the fault status register in r1. r9 must be preserved. + @ +#ifdef MULTI_DABORT + ldr ip, .LCprocfns + mov lr, pc + ldr pc, [ip, #PROCESSOR_DABT_FUNC] +#else + bl CPU_DABORT_HANDLER +#endif + .endm + #ifdef CONFIG_KPROBES .section .kprobes.text,"ax",%progbits #else @@ -126,106 +158,74 @@ ENDPROC(__und_invalid) SPFIX( subeq sp, sp, #4 ) stmia sp, {r1 - r12} - ldmia r0, {r1 - r3} - add r5, sp, #S_SP - 4 @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" - add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4) - SPFIX( addeq r0, r0, #4 ) - str r1, [sp, #-4]! @ save the "real" r0 copied + ldmia r0, {r3 - r5} + add r7, sp, #S_SP - 4 @ here for interlock avoidance + mov r6, #-1 @ "" "" "" "" + add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4) + SPFIX( addeq r2, r2, #4 ) + str r3, [sp, #-4]! @ save the "real" r0 copied @ from the exception stack - mov r1, lr + mov r3, lr @ @ We are now ready to fill in the remaining blanks on the stack: @ - @ r0 - sp_svc - @ r1 - lr_svc - @ r2 - lr_<exception>, already fixed up for correct return/restart - @ r3 - spsr_<exception> - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) + @ r2 - sp_svc + @ r3 - lr_svc + @ r4 - lr_<exception>, already fixed up for correct return/restart + @ r5 - spsr_<exception> + @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ - stmia r5, {r0 - r4} + stmia r7, {r2 - r6} + +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif .endm .align 5 __dabt_svc: svc_entry - - @ - @ get ready to re-enable interrupts if appropriate - @ - mrs r9, cpsr - tst r3, #PSR_I_BIT - biceq r9, r9, #PSR_I_BIT - - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. r9 must be preserved. - @ -#ifdef MULTI_DABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] -#else - bl CPU_DABORT_HANDLER -#endif - - @ - @ set desired IRQ state, then call main handler - @ - debug_entry r1 - msr cpsr_c, r9 mov r2, sp - bl do_DataAbort + dabt_helper @ @ IRQs off again before pulling preserved data off the stack @ disable_irq_notrace - @ - @ restore SPSR and restart the instruction - @ - ldr r2, [sp, #S_PSR] - svc_exit r2 @ return from exception +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) .align 5 __irq_svc: svc_entry + irq_handler -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif #ifdef CONFIG_PREEMPT get_thread_info tsk ldr r8, [tsk, #TI_PREEMPT] @ get preempt count - add r7, r8, #1 @ increment it - str r7, [tsk, #TI_PREEMPT] -#endif - - irq_handler -#ifdef CONFIG_PREEMPT - str r8, [tsk, #TI_PREEMPT] @ restore preempt count ldr r0, [tsk, #TI_FLAGS] @ get flags teq r8, #0 @ if preempt count != 0 movne r0, #0 @ force flags to 0 tst r0, #_TIF_NEED_RESCHED blne svc_preempt #endif - ldr r4, [sp, #S_PSR] @ irqs are already disabled + #ifdef CONFIG_TRACE_IRQFLAGS - tst r4, #PSR_I_BIT - bleq trace_hardirqs_on + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on #endif - svc_exit r4 @ return from exception + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__irq_svc) @@ -251,7 +251,6 @@ __und_svc: #else svc_entry #endif - @ @ call emulation code, which returns using r9 if it has emulated @ the instruction, or the more conventional lr if we are to treat @@ -260,15 +259,16 @@ __und_svc: @ r0 - instruction @ #ifndef CONFIG_THUMB2_KERNEL - ldr r0, [r2, #-4] + ldr r0, [r4, #-4] #else - ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2 + ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 and r9, r0, #0xf800 cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 - ldrhhs r9, [r2] @ bottom 16 bits + ldrhhs r9, [r4] @ bottom 16 bits orrhs r0, r9, r0, lsl #16 #endif adr r9, BSYM(1f) + mov r2, r4 bl call_fpe mov r0, sp @ struct pt_regs *regs @@ -282,45 +282,35 @@ __und_svc: @ @ restore SPSR and restart the instruction @ - ldr r2, [sp, #S_PSR] @ Get SVC cpsr - svc_exit r2 @ return from exception + ldr r5, [sp, #S_PSR] @ Get SVC cpsr +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) .align 5 __pabt_svc: svc_entry - - @ - @ re-enable interrupts if appropriate - @ - mrs r9, cpsr - tst r3, #PSR_I_BIT - biceq r9, r9, #PSR_I_BIT - - mov r0, r2 @ pass address of aborted instruction. -#ifdef MULTI_PABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] -#else - bl CPU_PABORT_HANDLER -#endif - debug_entry r1 - msr cpsr_c, r9 @ Maybe enable interrupts mov r2, sp @ regs - bl do_PrefetchAbort @ call abort handler + pabt_helper @ @ IRQs off again before pulling preserved data off the stack @ disable_irq_notrace - @ - @ restore SPSR and restart the instruction - @ - ldr r2, [sp, #S_PSR] - svc_exit r2 @ return from exception +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -351,23 +341,23 @@ ENDPROC(__pabt_svc) ARM( stmib sp, {r1 - r12} ) THUMB( stmia sp, {r0 - r12} ) - ldmia r0, {r1 - r3} + ldmia r0, {r3 - r5} add r0, sp, #S_PC @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" + mov r6, #-1 @ "" "" "" "" - str r1, [sp] @ save the "real" r0 copied + str r3, [sp] @ save the "real" r0 copied @ from the exception stack @ @ We are now ready to fill in the remaining blanks on the stack: @ - @ r2 - lr_<exception>, already fixed up for correct return/restart - @ r3 - spsr_<exception> - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) + @ r4 - lr_<exception>, already fixed up for correct return/restart + @ r5 - spsr_<exception> + @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ @ Also, separately save sp_usr and lr_usr @ - stmia r0, {r2 - r4} + stmia r0, {r4 - r6} ARM( stmdb r0, {sp, lr}^ ) THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) @@ -380,6 +370,10 @@ ENDPROC(__pabt_svc) @ Clear FP to mark the first stack frame @ zero_fp + +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif .endm .macro kuser_cmpxchg_check @@ -391,7 +385,7 @@ ENDPROC(__pabt_svc) @ if it was interrupted in a critical region. Here we @ perform a quick test inline since it should be false @ 99.9999% of the time. The rest is done out of line. - cmp r2, #TASK_SIZE + cmp r4, #TASK_SIZE blhs kuser_cmpxchg_fixup #endif #endif @@ -401,32 +395,9 @@ ENDPROC(__pabt_svc) __dabt_usr: usr_entry kuser_cmpxchg_check - - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. - @ -#ifdef MULTI_DABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] -#else - bl CPU_DABORT_HANDLER -#endif - - @ - @ IRQs on, then call the main handler - @ - debug_entry r1 - enable_irq mov r2, sp - adr lr, BSYM(ret_from_exception) - b do_DataAbort + dabt_helper + b ret_from_exception UNWIND(.fnend ) ENDPROC(__dabt_usr) @@ -434,28 +405,8 @@ ENDPROC(__dabt_usr) __irq_usr: usr_entry kuser_cmpxchg_check - -#ifdef CONFIG_IRQSOFF_TRACER - bl trace_hardirqs_off -#endif - - get_thread_info tsk -#ifdef CONFIG_PREEMPT - ldr r8, [tsk, #TI_PREEMPT] @ get preempt count - add r7, r8, #1 @ increment it - str r7, [tsk, #TI_PREEMPT] -#endif - irq_handler -#ifdef CONFIG_PREEMPT - ldr r0, [tsk, #TI_PREEMPT] - str r8, [tsk, #TI_PREEMPT] - teq r0, r7 - ARM( strne r0, [r0, -r0] ) - THUMB( movne r0, #0 ) - THUMB( strne r0, [r0] ) -#endif - + get_thread_info tsk mov why, #0 b ret_to_user_from_irq UNWIND(.fnend ) @@ -467,6 +418,9 @@ ENDPROC(__irq_usr) __und_usr: usr_entry + mov r2, r4 + mov r3, r5 + @ @ fall through to the emulation code, which returns using r9 if @ it has emulated the instruction, or the more conventional lr @@ -682,19 +636,8 @@ ENDPROC(__und_usr_unknown) .align 5 __pabt_usr: usr_entry - - mov r0, r2 @ pass address of aborted instruction. -#ifdef MULTI_PABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] -#else - bl CPU_PABORT_HANDLER -#endif - debug_entry r1 - enable_irq @ Enable interrupts mov r2, sp @ regs - bl do_PrefetchAbort @ call abort handler + pabt_helper UNWIND(.fnend ) /* fall through */ /* @@ -927,13 +870,13 @@ __kuser_cmpxchg: @ 0xffff0fc0 .text kuser_cmpxchg_fixup: @ Called from kuser_cmpxchg_check macro. - @ r2 = address of interrupted insn (must be preserved). + @ r4 = address of interrupted insn (must be preserved). @ sp = saved regs. r7 and r8 are clobbered. @ 1b = first critical insn, 2b = last critical insn. - @ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b. + @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b. mov r7, #0xffff0fff sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg))) - subs r8, r2, r7 + subs r8, r4, r7 rsbcss r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] mov pc, lr diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 051166c2a932..4d6ad8348e89 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -165,25 +165,6 @@ .endm #endif /* !CONFIG_THUMB2_KERNEL */ - @ - @ Debug exceptions are taken as prefetch or data aborts. - @ We must disable preemption during the handler so that - @ we can access the debug registers safely. - @ - .macro debug_entry, fsr -#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT) - ldr r4, =0x40f @ mask out fsr.fs - and r5, r4, \fsr - cmp r5, #2 @ debug exception - bne 1f - get_thread_info r10 - ldr r6, [r10, #TI_PREEMPT] @ get preempt count - add r11, r6, #1 @ increment it - str r11, [r10, #TI_PREEMPT] -1: -#endif - .endm - /* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 6b1e0ad9ec3b..d46f25968bec 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,8 +32,16 @@ * numbers for r1. * */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled #ifndef CONFIG_CPU_CP15 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 278c1b0ebb2e..742b6108a001 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -71,8 +71,16 @@ * crap here - that's what the boot loader (or in extreme, well justified * circumstances, zImage) is for. */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 87acc25d7a3e..a927ca1f5566 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -796,7 +796,7 @@ unlock: /* * Called from either the Data Abort Handler [watchpoint] or the - * Prefetch Abort Handler [breakpoint] with preemption disabled. + * Prefetch Abort Handler [breakpoint] with interrupts disabled. */ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -804,8 +804,10 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, int ret = 0; u32 dscr; - /* We must be called with preemption disabled. */ - WARN_ON(preemptible()); + preempt_disable(); + + if (interrupts_enabled(regs)) + local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ ARM_DBG_READ(c1, 0, dscr); @@ -824,10 +826,6 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, ret = 1; /* Unhandled fault. */ } - /* - * Re-enable preemption after it was disabled in the - * low-level exception handling code. - */ preempt_enable(); return ret; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 83bbad03fcc6..0f928a131af8 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -131,54 +131,63 @@ int __init arch_probe_nr_irqs(void) #ifdef CONFIG_HOTPLUG_CPU -static bool migrate_one_irq(struct irq_data *d) +static bool migrate_one_irq(struct irq_desc *desc) { - unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask); + struct irq_data *d = irq_desc_get_irq_data(desc); + const struct cpumask *affinity = d->affinity; + struct irq_chip *c; bool ret = false; - if (cpu >= nr_cpu_ids) { - cpu = cpumask_any(cpu_online_mask); + /* + * If this is a per-CPU interrupt, or the affinity does not + * include this CPU, then we have nothing to do. + */ + if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity)) + return false; + + if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { + affinity = cpu_online_mask; ret = true; } - pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu); - - d->chip->irq_set_affinity(d, cpumask_of(cpu), true); + c = irq_data_get_irq_chip(d); + if (c->irq_set_affinity) + c->irq_set_affinity(d, affinity, true); + else + pr_debug("IRQ%u: unable to set affinity\n", d->irq); return ret; } /* - * The CPU has been marked offline. Migrate IRQs off this CPU. If - * the affinity settings do not allow other CPUs, force them onto any + * The current CPU has been marked offline. Migrate IRQs off this CPU. + * If the affinity settings do not allow other CPUs, force them onto any * available CPU. + * + * Note: we must iterate over all IRQs, whether they have an attached + * action structure or not, as we need to get chained interrupts too. */ void migrate_irqs(void) { - unsigned int i, cpu = smp_processor_id(); + unsigned int i; struct irq_desc *desc; unsigned long flags; local_irq_save(flags); for_each_irq_desc(i, desc) { - struct irq_data *d = &desc->irq_data; bool affinity_broken = false; - raw_spin_lock(&desc->lock); - do { - if (desc->action == NULL) - break; - - if (d->node != cpu) - break; + if (!desc) + continue; - affinity_broken = migrate_one_irq(d); - } while (0); + raw_spin_lock(&desc->lock); + affinity_broken = migrate_one_irq(desc); raw_spin_unlock(&desc->lock); if (affinity_broken && printk_ratelimit()) - pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu); + pr_warning("IRQ%u no longer affine to CPU%u\n", i, + smp_processor_id()); } local_irq_restore(flags); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d53c0abc4dd3..8d8507858e5c 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -435,7 +435,7 @@ armpmu_reserve_hardware(void) if (irq >= 0) free_irq(irq, NULL); } - release_pmu(pmu_device); + release_pmu(ARM_PMU_DEVICE_CPU); pmu_device = NULL; } @@ -454,7 +454,7 @@ armpmu_release_hardware(void) } armpmu->stop(); - release_pmu(pmu_device); + release_pmu(ARM_PMU_DEVICE_CPU); pmu_device = NULL; } @@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { /* Enable all of the perf events on hardware. */ - int idx; + int idx, enabled = 0; struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (!armpmu) @@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu) continue; armpmu->enable(&event->hw, idx); + enabled = 1; } - armpmu->start(); + if (enabled) + armpmu->start(); } static void armpmu_disable(struct pmu *pmu) diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2c79eec19262..2b70709376c3 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <asm/pmu.h> @@ -25,36 +26,88 @@ static volatile long pmu_lock; static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES]; -static int __devinit pmu_device_probe(struct platform_device *pdev) +static int __devinit pmu_register(struct platform_device *pdev, + enum arm_pmu_type type) { - - if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) { + if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", pdev->id); + "device %d\n", type); return -EINVAL; } - if (pmu_devices[pdev->id]) - pr_warning("registering new PMU device type %d overwrites " - "previous registration!\n", pdev->id); - else - pr_info("registered new PMU device of type %d\n", - pdev->id); + if (pmu_devices[type]) { + pr_warning("rejecting duplicate registration of PMU device " + "type %d.", type); + return -ENOSPC; + } - pmu_devices[pdev->id] = pdev; + pr_info("registered new PMU device of type %d\n", type); + pmu_devices[type] = pdev; return 0; } -static struct platform_driver pmu_driver = { +#define OF_MATCH_PMU(_name, _type) { \ + .compatible = _name, \ + .data = (void *)_type, \ +} + +#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU) + +static struct of_device_id armpmu_of_device_ids[] = { + OF_MATCH_CPU("arm,cortex-a9-pmu"), + OF_MATCH_CPU("arm,cortex-a8-pmu"), + OF_MATCH_CPU("arm,arm1136-pmu"), + OF_MATCH_CPU("arm,arm1176-pmu"), + {}, +}; + +#define PLAT_MATCH_PMU(_name, _type) { \ + .name = _name, \ + .driver_data = _type, \ +} + +#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU) + +static struct platform_device_id armpmu_plat_device_ids[] = { + PLAT_MATCH_CPU("arm-pmu"), + {}, +}; + +enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + const struct platform_device_id *pdev_id; + + /* provided by of_device_id table */ + if (pdev->dev.of_node) { + of_id = of_match_device(armpmu_of_device_ids, &pdev->dev); + BUG_ON(!of_id); + return (enum arm_pmu_type)of_id->data; + } + + /* Provided by platform_device_id table */ + pdev_id = platform_get_device_id(pdev); + BUG_ON(!pdev_id); + return pdev_id->driver_data; +} + +static int __devinit armpmu_device_probe(struct platform_device *pdev) +{ + return pmu_register(pdev, armpmu_device_type(pdev)); +} + +static struct platform_driver armpmu_driver = { .driver = { .name = "arm-pmu", + .of_match_table = armpmu_of_device_ids, }, - .probe = pmu_device_probe, + .probe = armpmu_device_probe, + .id_table = armpmu_plat_device_ids, }; static int __init register_pmu_driver(void) { - return platform_driver_register(&pmu_driver); + return platform_driver_register(&armpmu_driver); } device_initcall(register_pmu_driver); @@ -77,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type device) { - if (WARN_ON(pdev != pmu_devices[pdev->id])) + if (WARN_ON(!pmu_devices[device])) return -EINVAL; - clear_bit_unlock(pdev->id, &pmu_lock); + clear_bit_unlock(device, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed11fb08b05a..9c3278f37796 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup); #endif extern void paging_init(struct machine_desc *desc); +extern void sanity_check_meminfo(void); extern void reboot_setup(char *str); unsigned int processor_id; @@ -342,54 +343,6 @@ static void __init feat_v6_fixup(void) elf_hwcap &= ~HWCAP_TLS; } -static void __init setup_processor(void) -{ - struct proc_info_list *list; - - /* - * locate processor in the list of supported processor - * types. The linker builds this table for us from the - * entries in arch/arm/mm/proc-*.S - */ - list = lookup_processor_type(read_cpuid_id()); - if (!list) { - printk("CPU configuration botched (ID %08x), unable " - "to continue.\n", read_cpuid_id()); - while (1); - } - - cpu_name = list->cpu_name; - -#ifdef MULTI_CPU - processor = *list->proc; -#endif -#ifdef MULTI_TLB - cpu_tlb = *list->tlb; -#endif -#ifdef MULTI_USER - cpu_user = *list->user; -#endif -#ifdef MULTI_CACHE - cpu_cache = *list->cache; -#endif - - printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", - cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); - - sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); - sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); - elf_hwcap = list->elf_hwcap; -#ifndef CONFIG_ARM_THUMB - elf_hwcap &= ~HWCAP_THUMB; -#endif - - feat_v6_fixup(); - - cacheid_init(); - cpu_proc_init(); -} - /* * cpu_init - initialise one CPU. * @@ -405,6 +358,8 @@ void cpu_init(void) BUG(); } + cpu_proc_init(); + /* * Define the placement constraint for the inline asm directive below. * In Thumb-2, msr with an immediate value is not allowed. @@ -441,6 +396,54 @@ void cpu_init(void) : "r14"); } +static void __init setup_processor(void) +{ + struct proc_info_list *list; + + /* + * locate processor in the list of supported processor + * types. The linker builds this table for us from the + * entries in arch/arm/mm/proc-*.S + */ + list = lookup_processor_type(read_cpuid_id()); + if (!list) { + printk("CPU configuration botched (ID %08x), unable " + "to continue.\n", read_cpuid_id()); + while (1); + } + + cpu_name = list->cpu_name; + +#ifdef MULTI_CPU + processor = *list->proc; +#endif +#ifdef MULTI_TLB + cpu_tlb = *list->tlb; +#endif +#ifdef MULTI_USER + cpu_user = *list->user; +#endif +#ifdef MULTI_CACHE + cpu_cache = *list->cache; +#endif + + printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", + cpu_name, read_cpuid_id(), read_cpuid_id() & 15, + proc_arch[cpu_architecture()], cr_alignment); + + sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); + sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); + elf_hwcap = list->elf_hwcap; +#ifndef CONFIG_ARM_THUMB + elf_hwcap &= ~HWCAP_THUMB; +#endif + + feat_v6_fixup(); + + cacheid_init(); + cpu_init(); +} + void __init dump_machine_table(void) { struct machine_desc *p; @@ -900,6 +903,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); paging_init(mdesc); @@ -913,7 +917,6 @@ void __init setup_arch(char **cmdline_p) #endif reserve_crashkernel(); - cpu_init(); tcm_init(); #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 6398ead9d1c0..dc902f2c6845 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -10,64 +10,61 @@ /* * Save CPU state for a suspend * r1 = v:p offset - * r3 = virtual return function - * Note: sp is decremented to allocate space for CPU state on stack - * r0-r3,r9,r10,lr corrupted + * r2 = suspend function arg0 + * r3 = suspend function */ -ENTRY(cpu_suspend) - mov r9, lr +ENTRY(__cpu_suspend) + stmfd sp!, {r4 - r11, lr} #ifdef MULTI_CPU ldr r10, =processor - mov r2, sp @ current virtual SP - ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state + ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function - sub sp, sp, r0 @ allocate CPU state on stack - mov r0, sp @ save pointer +#else + ldr r5, =cpu_suspend_size + ldr ip, =cpu_do_resume +#endif + mov r6, sp @ current virtual SP + sub sp, sp, r5 @ allocate CPU state on stack + mov r0, sp @ save pointer to CPU save block add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn - ldr r3, =sleep_save_sp - add r2, sp, r1 @ convert SP to phys + stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn + ldr r5, =sleep_save_sp + add r6, sp, r1 @ convert SP to phys + stmfd sp!, {r2, r3} @ save suspend func arg and pointer #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) and lr, lr, #15 - str r2, [r3, lr, lsl #2] @ save phys SP + str r6, [r5, lr, lsl #2] @ save phys SP #else - str r2, [r3] @ save phys SP + str r6, [r5] @ save phys SP #endif +#ifdef MULTI_CPU mov lr, pc ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state #else - mov r2, sp @ current virtual SP - ldr r0, =cpu_suspend_size - sub sp, sp, r0 @ allocate CPU state on stack - mov r0, sp @ save pointer - stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn - ldr r3, =sleep_save_sp - add r2, sp, r1 @ convert SP to phys -#ifdef CONFIG_SMP - ALT_SMP(mrc p15, 0, lr, c0, c0, 5) - ALT_UP(mov lr, #0) - and lr, lr, #15 - str r2, [r3, lr, lsl #2] @ save phys SP -#else - str r2, [r3] @ save phys SP -#endif bl cpu_do_suspend #endif @ flush data cache #ifdef MULTI_CACHE ldr r10, =cpu_cache - mov lr, r9 + mov lr, pc ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] #else - mov lr, r9 - b __cpuc_flush_kern_all + bl __cpuc_flush_kern_all #endif -ENDPROC(cpu_suspend) + adr lr, BSYM(cpu_suspend_abort) + ldmfd sp!, {r0, pc} @ call suspend fn +ENDPROC(__cpu_suspend) .ltorg +cpu_suspend_abort: + ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn + mov sp, r2 + ldmfd sp!, {r4 - r11, pc} +ENDPROC(cpu_suspend_abort) + /* * r0 = control register value * r1 = v:p offset (preserved by cpu_do_resume) @@ -97,7 +94,9 @@ ENDPROC(cpu_resume_turn_mmu_on) cpu_resume_after_mmu: str r5, [r2, r4, lsl #2] @ restore old mapping mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache - mov pc, lr + bl cpu_init @ restore the und/abt/irq banked regs + mov r0, #0 @ return zero on success + ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) /* @@ -120,20 +119,11 @@ ENTRY(cpu_resume) ldr r0, sleep_save_sp @ stack phys addr #endif setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off -#ifdef MULTI_CPU - @ load v:p, stack, return fn, resume fn - ARM( ldmia r0!, {r1, sp, lr, pc} ) -THUMB( ldmia r0!, {r1, r2, r3, r4} ) + @ load v:p, stack, resume fn + ARM( ldmia r0!, {r1, sp, pc} ) +THUMB( ldmia r0!, {r1, r2, r3} ) THUMB( mov sp, r2 ) -THUMB( mov lr, r3 ) -THUMB( bx r4 ) -#else - @ load v:p, stack, return fn - ARM( ldmia r0!, {r1, sp, lr} ) -THUMB( ldmia r0!, {r1, r2, lr} ) -THUMB( mov sp, r2 ) - b cpu_do_resume -#endif +THUMB( bx r3 ) ENDPROC(cpu_resume) sleep_save_sp: diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index e7f92a4321f3..167e3cbe1f2f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -365,8 +365,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) */ if (max_cpus > ncores) max_cpus = ncores; - - if (max_cpus > 1) { + if (ncores > 1 && max_cpus) { /* * Enable the local timer or broadcast device for the * boot CPU, but only if we have more than one CPU. @@ -374,6 +373,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) percpu_timer_setup(); /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. A platform should + * re-initialize the map in platform_smp_prepare_cpus() if + * present != possible (e.g. physical hotplug). + */ + init_cpu_present(&cpu_possible_map); + + /* * Initialise the SCU if there are more than one CPU * and let them know where to start. */ diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index a1e757c3439b..79ed5e7f204a 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -20,6 +20,7 @@ #define SCU_INVALIDATE 0x0c #define SCU_FPGA_REVISION 0x10 +#ifdef CONFIG_SMP /* * Get the number of CPU cores from the SCU configuration */ @@ -50,6 +51,7 @@ void __init scu_enable(void __iomem *scu_base) */ flush_cache_all(); } +#endif /* * Set the executing CPUs power mode as defined. This will be in diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 60636f499cb3..2c277d40cee6 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void) twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, - (twd_timer_rate / 1000000) % 100); + (twd_timer_rate / 10000) % 100); } } diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index f5cf660eefcc..30e302d33e0a 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -19,6 +19,8 @@ #include "tcm.h" static struct gen_pool *tcm_pool; +static bool dtcm_present; +static bool itcm_present; /* TCM section definitions from the linker */ extern char __itcm_start, __sitcm_text, __eitcm_text; @@ -90,6 +92,18 @@ void tcm_free(void *addr, size_t len) } EXPORT_SYMBOL(tcm_free); +bool tcm_dtcm_present(void) +{ + return dtcm_present; +} +EXPORT_SYMBOL(tcm_dtcm_present); + +bool tcm_itcm_present(void) +{ + return itcm_present; +} +EXPORT_SYMBOL(tcm_itcm_present); + static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, u32 *offset) { @@ -134,6 +148,10 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, (tcm_region & 1) ? "" : "not "); } + /* Not much fun you can do with a size 0 bank */ + if (tcm_size == 0) + return 0; + /* Force move the TCM bank to where we want it, enable */ tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1; @@ -165,12 +183,20 @@ void __init tcm_init(void) u32 tcm_status = read_cpuid_tcmstatus(); u8 dtcm_banks = (tcm_status >> 16) & 0x03; u8 itcm_banks = (tcm_status & 0x03); + size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data; + size_t itcm_code_sz = &__eitcm_text - &__sitcm_text; char *start; char *end; char *ram; int ret; int i; + /* Values greater than 2 for D/ITCM banks are "reserved" */ + if (dtcm_banks > 2) + dtcm_banks = 0; + if (itcm_banks > 2) + itcm_banks = 0; + /* Setup DTCM if present */ if (dtcm_banks > 0) { for (i = 0; i < dtcm_banks; i++) { @@ -178,6 +204,13 @@ void __init tcm_init(void) if (ret) return; } + /* This means you compiled more code than fits into DTCM */ + if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) { + pr_info("CPU DTCM: %u bytes of code compiled to " + "DTCM but only %lu bytes of DTCM present\n", + dtcm_code_sz, (dtcm_end - DTCM_OFFSET)); + goto no_dtcm; + } dtcm_res.end = dtcm_end - 1; request_resource(&iomem_resource, &dtcm_res); dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET; @@ -186,12 +219,16 @@ void __init tcm_init(void) start = &__sdtcm_data; end = &__edtcm_data; ram = &__dtcm_start; - /* This means you compiled more code than fits into DTCM */ - BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET)); - memcpy(start, ram, (end-start)); - pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); + memcpy(start, ram, dtcm_code_sz); + pr_debug("CPU DTCM: copied data from %p - %p\n", + start, end); + dtcm_present = true; + } else if (dtcm_code_sz) { + pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no " + "DTCM banks present in CPU\n", dtcm_code_sz); } +no_dtcm: /* Setup ITCM if present */ if (itcm_banks > 0) { for (i = 0; i < itcm_banks; i++) { @@ -199,6 +236,13 @@ void __init tcm_init(void) if (ret) return; } + /* This means you compiled more code than fits into ITCM */ + if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) { + pr_info("CPU ITCM: %u bytes of code compiled to " + "ITCM but only %lu bytes of ITCM present\n", + itcm_code_sz, (itcm_end - ITCM_OFFSET)); + return; + } itcm_res.end = itcm_end - 1; request_resource(&iomem_resource, &itcm_res); itcm_iomap[0].length = itcm_end - ITCM_OFFSET; @@ -207,10 +251,13 @@ void __init tcm_init(void) start = &__sitcm_text; end = &__eitcm_text; ram = &__itcm_start; - /* This means you compiled more code than fits into ITCM */ - BUG_ON((end - start) > (itcm_end - ITCM_OFFSET)); - memcpy(start, ram, (end-start)); - pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); + memcpy(start, ram, itcm_code_sz); + pr_debug("CPU ITCM: copied code from %p - %p\n", + start, end); + itcm_present = true; + } else if (itcm_code_sz) { + pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no " + "ITCM banks present in CPU\n", itcm_code_sz); } } @@ -221,7 +268,6 @@ void __init tcm_init(void) */ static int __init setup_tcm_pool(void) { - u32 tcm_status = read_cpuid_tcmstatus(); u32 dtcm_pool_start = (u32) &__edtcm_data; u32 itcm_pool_start = (u32) &__eitcm_text; int ret; @@ -236,7 +282,7 @@ static int __init setup_tcm_pool(void) pr_debug("Setting up TCM memory pool\n"); /* Add the rest of DTCM to the TCM pool */ - if (tcm_status & (0x03 << 16)) { + if (dtcm_present) { if (dtcm_pool_start < dtcm_end) { ret = gen_pool_add(tcm_pool, dtcm_pool_start, dtcm_end - dtcm_pool_start, -1); @@ -253,7 +299,7 @@ static int __init setup_tcm_pool(void) } /* Add the rest of ITCM to the TCM pool */ - if (tcm_status & 0x03) { + if (itcm_present) { if (itcm_pool_start < itcm_end) { ret = gen_pool_add(tcm_pool, itcm_pool_start, itcm_end - itcm_pool_start, -1); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index e5287f21badc..bf977f8514f6 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -38,57 +38,6 @@ jiffies = jiffies_64 + 4; SECTIONS { -#ifdef CONFIG_XIP_KERNEL - . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); -#else - . = PAGE_OFFSET + TEXT_OFFSET; -#endif - - .init : { /* Init code and data */ - _stext = .; - _sinittext = .; - HEAD_TEXT - INIT_TEXT - ARM_EXIT_KEEP(EXIT_TEXT) - _einittext = .; - ARM_CPU_DISCARD(PROC_INFO) - __arch_info_begin = .; - *(.arch.info.init) - __arch_info_end = .; - __tagtable_begin = .; - *(.taglist.init) - __tagtable_end = .; -#ifdef CONFIG_SMP_ON_UP - __smpalt_begin = .; - *(.alt.smp.init) - __smpalt_end = .; -#endif - - __pv_table_begin = .; - *(.pv_table) - __pv_table_end = .; - - INIT_SETUP(16) - - INIT_CALLS - CON_INITCALL - SECURITY_INITCALL - INIT_RAM_FS - -#ifndef CONFIG_XIP_KERNEL - __init_begin = _stext; - INIT_DATA - ARM_EXIT_KEEP(EXIT_DATA) -#endif - } - - PERCPU_SECTION(32) - -#ifndef CONFIG_XIP_KERNEL - . = ALIGN(PAGE_SIZE); - __init_end = .; -#endif - /* * unwind exit sections must be discarded before the rest of the * unwind sections get included. @@ -106,10 +55,22 @@ SECTIONS *(.fixup) *(__ex_table) #endif +#ifndef CONFIG_SMP_ON_UP + *(.alt.smp.init) +#endif } +#ifdef CONFIG_XIP_KERNEL + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); +#else + . = PAGE_OFFSET + TEXT_OFFSET; +#endif + .head.text : { + _text = .; + HEAD_TEXT + } .text : { /* Real text segment */ - _text = .; /* Text and read-only data */ + _stext = .; /* Text and read-only data */ __exception_text_start = .; *(.exception.text) __exception_text_end = .; @@ -122,8 +83,6 @@ SECTIONS *(.fixup) #endif *(.gnu.warning) - *(.rodata) - *(.rodata.*) *(.glue_7) *(.glue_7t) . = ALIGN(4); @@ -152,10 +111,63 @@ SECTIONS _etext = .; /* End of text and rodata section */ +#ifndef CONFIG_XIP_KERNEL + . = ALIGN(PAGE_SIZE); + __init_begin = .; +#endif + + INIT_TEXT_SECTION(8) + .exit.text : { + ARM_EXIT_KEEP(EXIT_TEXT) + } + .init.proc.info : { + ARM_CPU_DISCARD(PROC_INFO) + } + .init.arch.info : { + __arch_info_begin = .; + *(.arch.info.init) + __arch_info_end = .; + } + .init.tagtable : { + __tagtable_begin = .; + *(.taglist.init) + __tagtable_end = .; + } +#ifdef CONFIG_SMP_ON_UP + .init.smpalt : { + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; + } +#endif + .init.pv_table : { + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + } + .init.data : { +#ifndef CONFIG_XIP_KERNEL + INIT_DATA +#endif + INIT_SETUP(16) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + } +#ifndef CONFIG_XIP_KERNEL + .exit.data : { + ARM_EXIT_KEEP(EXIT_DATA) + } +#endif + + PERCPU_SECTION(32) + #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; #else + __init_end = .; . = ALIGN(THREAD_SIZE); __data_loc = .; #endif @@ -270,12 +282,6 @@ SECTIONS /* Default discards */ DISCARDS - -#ifndef CONFIG_SMP_ON_UP - /DISCARD/ : { - *(.alt.smp.init) - } -#endif } /* diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 17fae4a42ab5..f1013d08bb57 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index cd850ed6f335..dba0d8d8a4bd 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(portnr); + at91cap9_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b228ce9e21a1..83a1a3fee554 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a0ba475be04c..7227755ffec6 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91rm9200_set_console_clock(portnr); + at91rm9200_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1fdeb9058a76..39f81f47b4ba 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9260_set_console_clock(portnr); + at91sam9260_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3eb4538fceeb..5004bf0a05f2 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9261_set_console_clock(portnr); + at91sam9261_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ffe081b77ed0..a050f41fc860 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(portnr); + at91sam9263_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2bb6ff9af1c7..11e214121b23 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = { static struct clk_lookup periph_clocks_lookups[] = { /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 05674865bc21..600bffb01edb 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9g45_set_console_clock(portnr); + at91sam9g45_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 1a40f16b66c8..29dff18ed130 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c296045f2b6a..aacb19dc9225 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9rl_set_console_clock(portnr); + at91sam9rl_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 1904fdf87613..cdb65d483250 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); + cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index d600dc123227..5c240743c5b7 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index f897f84d43dc..b60c22b6e241 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 605b26f40a4c..9bbdc92ea194 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 7624cf0d006b..1325a50101a8 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 063c95d0e8f0..33eaa135f248 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index b855ee75f72c..8f4866045b41 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -13,13 +13,13 @@ * the 16-31 bit are reserved for at91 generic information * * bit 31: - * 0 => nand 16 bit - * 1 => nand 8 bit + * 0 => nand 8 bit + * 1 => nand 16 bit */ -#define BOARD_HAVE_NAND_8BIT (1 << 31) -static int inline board_have_nand_8bit(void) +#define BOARD_HAVE_NAND_16BIT (1 << 31) +static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_8BIT; + return system_rev & BOARD_HAVE_NAND_16BIT; } #endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S index 7d393ca010ac..94c950d783ba 100644 --- a/arch/arm/mach-bcmring/include/mach/entry-macro.S +++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S @@ -80,7 +80,3 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro irq_prio_table - .endm - diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c67f684ee3e5..09a87e61ffcf 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -520,7 +520,7 @@ fail: */ if (have_imager()) { label = "HD imager"; - mux |= 1; + mux |= 2; /* externally mux MMC1/ENET/AIC33 to imager */ mux |= BIT(6) | BIT(5) | BIT(3); @@ -540,7 +540,7 @@ fail: resets &= ~BIT(1); if (have_tvp7002()) { - mux |= 2; + mux |= 1; resets &= ~BIT(2); label = "tvp7002 HD"; } else { diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index e7221398e5af..cafbe13a82a5 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -254,8 +254,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) { struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + struct davinci_gpio_controller *d; - g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); + d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); + g = (struct davinci_gpio_regs __iomem *)d->regs; /* we only care about one bank */ if (irq & 1) @@ -274,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) if (!status) break; __raw_writel(status, &g->intstat); - if (irq & 1) - status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)irq_get_handler_data(irq); + n = d->irq_base; + if (irq & 1) { + n += 16; + status >>= 16; + } + while (status) { res = ffs(status); n += res; @@ -424,7 +429,13 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_handler_data(bank_irq, (__force void *)g); + + /* + * Each chip handles 32 gpios, and each irq bank consists of 16 + * gpio irqs. Pass the irq bank's corresponding controller to + * the chained irq handler. + */ + irq_set_handler_data(bank_irq, &chips[gpio / 32]); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index fbdebc7cb409..e14c0dc0e12c 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -46,6 +46,3 @@ #endif 1002: .endm - - .macro irq_prio_table - .endm diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index bfe68ec4e1a6..952dc126c390 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -52,8 +52,14 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) struct irq_chip_type *ct; gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, irq_start); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 1d4b65fd673e..6659a0d137a3 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev, unsigned int mcr; mcr = 0; - if (!(mctrl & TIOCM_RTS)) + if (mctrl & TIOCM_RTS) mcr |= 2; - if (!(mctrl & TIOCM_DTR)) + if (mctrl & TIOCM_DTR) mcr |= 1; __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 9babe4473e88..bfd621460abf 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -23,6 +23,7 @@ #include <plat/sdhci.h> #include <plat/devs.h> #include <plat/fimc-core.h> +#include <plat/iic-core.h> #include <mach/regs-irq.h> @@ -132,6 +133,11 @@ void __init exynos4_map_io(void) s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 1eed5f9f7bd3..983069a53239 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = { static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); return 0; } diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 6c6cfc50c46b..3cdeb3647542 100644 --- a/arch/arm/mach-exynos4/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -13,7 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT + __CPUINIT /* * exynos4 specific entry point for secondary CPUs. This provides diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 152676471b67..edd814110da8 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, @@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index c5e65a02be8d..b68d5bdf04cf 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -154,14 +154,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 8755ca8dd48d..533c28f758ca 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -280,7 +280,7 @@ static struct sleep_save exynos4_l2cc_save[] = { SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), }; -void exynos4_cpu_suspend(void) +static int exynos4_cpu_suspend(unsigned long arg) { unsigned long tmp; unsigned long mask = 0xFFFFFFFF; diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S index 6b62425417a6..0984078f1eba 100644 --- a/arch/arm/mach-exynos4/sleep.S +++ b/arch/arm/mach-exynos4/sleep.S @@ -33,28 +33,6 @@ .text /* - * s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - - .ltorg - - /* * sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S index 6d3b917c4a18..c3948e5ba4a0 100644 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ b/arch/arm/mach-h720x/include/mach/entry-macro.S @@ -57,9 +57,6 @@ tst \irqstat, #1 @ bit 0 should be set .endm - .macro irq_prio_table - .endm - #else #error hynix processor selection missmatch #endif diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 74ed81a3cb1a..07772575d7ab 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void) /* * clocksource */ + +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) +{ + return *IXP4XX_OSTS; +} + unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); - clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32, - clocksource_mmio_readl_up); + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); } /* diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S index 870227c96602..b725f6c93975 100644 --- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S @@ -41,7 +41,3 @@ rsb \irqnr, \irqnr, #31 teq \irqstat, #0 .endm - - .macro irq_prio_table - .endm - diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 72b4e7631583..ab9f999106c7 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); /* device and clock bindings */ diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 8f92ccd26edf..1464607aa60d 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); /* device and clock bindings */ diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 2034098cf015..315b9f365329 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -157,12 +157,4 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); } diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c9297b68..f49ce85d2448 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .delay = 9, }; -static struct platform_device ams_delta_kp_device __initdata = { +static struct platform_device ams_delta_kp_device = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device __initdata = { +static struct platform_device ams_delta_lcd_device = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device __initdata = { +static struct platform_device ams_delta_led_device = { .name = "ams-delta-led", .id = -1 }; @@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device __initdata = { +static struct platform_device ams_delta_camera_device = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 04c4b04cf54e..364137c2042c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap15xx_mpu_gpio = { +static struct platform_device omap15xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .bank_width = 16, }; -static struct __initdata platform_device omap15xx_gpio = { +static struct platform_device omap15xx_gpio = { .name = "omap_gpio", .id = 1, .dev = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 5dd0d4c82b24..293a246e2824 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap16xx_mpu_gpio = { +static struct platform_device omap16xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio1 = { +static struct platform_device omap16xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio2 = { +static struct platform_device omap16xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio3 = { +static struct platform_device omap16xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio4 = { +static struct platform_device omap16xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 1204c8b871af..c6ad248d63a6 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .bank_stride = 2, }; -static struct __initdata platform_device omap7xx_mpu_gpio = { +static struct platform_device omap7xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio1 = { +static struct platform_device omap7xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio2 = { +static struct platform_device omap7xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio3 = { +static struct platform_device omap7xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio4 = { +static struct platform_device omap7xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { @@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio5 = { +static struct platform_device omap7xx_gpio5 = { .name = "omap_gpio", .id = 5, .dev = { @@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio6 = { +static struct platform_device omap7xx_gpio6 = { .name = "omap_gpio", .id = 6, .dev = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 990366726c58..88bd6f7705f0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev __initdata_or_module = { +static struct platform_device rx51_si4713_dev = { .name = "radio-si4713", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index da53ba3917ca..aab884fecc55 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -286,14 +286,15 @@ void omap3_save_scratchpad_contents(void) scratchpad_contents.boot_config_ptr = 0x0; if (cpu_is_omap3630()) scratchpad_contents.public_restore_ptr = - virt_to_phys(get_omap3630_restore_pointer()); + virt_to_phys(omap3_restore_3630); else if (omap_rev() != OMAP3430_REV_ES3_0 && omap_rev() != OMAP3430_REV_ES3_1) scratchpad_contents.public_restore_ptr = - virt_to_phys(get_restore_pointer()); + virt_to_phys(omap3_restore); else scratchpad_contents.public_restore_ptr = - virt_to_phys(get_es3_restore_pointer()); + virt_to_phys(omap3_restore_es3); + if (omap_type() == OMAP2_DEVICE_TYPE_GP) scratchpad_contents.secure_ram_restore_ptr = 0x0; else diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a016c8b59e00..d4ef75d5a382 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -386,9 +386,9 @@ extern void omap4_ctrl_pad_writel(u32 val, u16 offset); extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); -extern u32 *get_restore_pointer(void); -extern u32 *get_es3_restore_pointer(void); -extern u32 *get_omap3630_restore_pointer(void); +extern void omap3_restore(void); +extern void omap3_restore_es3(void); +extern void omap3_restore_3630(void); extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index a48690b90990..ceb8b7e593d7 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -165,6 +165,3 @@ #endif #endif /* MULTI_OMAP2 */ - - .macro irq_prio_table - .endm diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ecfe93c4b585..ce65e9329c7b 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -125,14 +125,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); /* * Initialise the SCU and wake up the secondary core using diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 45bcfce77352..04ee56646126 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -88,18 +88,28 @@ extern int pm_dbg_regset_init(int reg_set); #define pm_dbg_regset_init(reg_set) do {} while (0); #endif /* CONFIG_PM_DEBUG */ +/* 24xx */ extern void omap24xx_idle_loop_suspend(void); +extern unsigned int omap24xx_idle_loop_suspend_sz; extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); -extern void omap34xx_cpu_suspend(u32 *addr, int save_state); -extern int save_secure_ram_context(u32 *addr); -extern void omap3_save_scratchpad_contents(void); +extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; +/* 3xxx */ +extern void omap34xx_cpu_suspend(int save_state); + +/* omap3_do_wfi function pointer and size, for copy to SRAM */ +extern void omap3_do_wfi(void); +extern unsigned int omap3_do_wfi_sz; +/* ... and its pointer from SRAM after copy */ +extern void (*omap3_do_wfi_sram)(void); + +/* save_secure_ram_context function pointer and size, for copy to SRAM */ +extern int save_secure_ram_context(u32 *addr); extern unsigned int save_secure_ram_context_sz; -extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap34xx_cpu_suspend_sz; + +extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c155c9d1c82c..b77d82665abb 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -31,6 +31,8 @@ #include <linux/console.h> #include <trace/events/power.h> +#include <asm/suspend.h> + #include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" @@ -40,8 +42,6 @@ #include <plat/gpmc.h> #include <plat/dma.h> -#include <asm/tlbflush.h> - #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" @@ -64,11 +64,6 @@ static inline bool is_suspending(void) } #endif -/* Scratchpad offsets */ -#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 -#define OMAP343X_TABLE_VALUE_OFFSET 0xc0 -#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8 - /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -83,9 +78,8 @@ struct power_state { static LIST_HEAD(pwrst_list); -static void (*_omap_sram_idle)(u32 *addr, int save_state); - static int (*_omap_save_secure_sram)(u32 *addr); +void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; @@ -312,28 +306,25 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -/* Function to restore the table entry that was modified for enabling MMU */ -static void restore_table_entry(void) +static void omap34xx_save_context(u32 *save) { - void __iomem *scratchpad_address; - u32 previous_value, control_reg_value; - u32 *address; + u32 val; - scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); + /* Read Auxiliary Control Register */ + asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val)); + *save++ = 1; + *save++ = val; - /* Get address of entry that was modified */ - address = (u32 *)__raw_readl(scratchpad_address + - OMAP343X_TABLE_ADDRESS_OFFSET); - /* Get the previous value which needs to be restored */ - previous_value = __raw_readl(scratchpad_address + - OMAP343X_TABLE_VALUE_OFFSET); - address = __va(address); - *address = previous_value; - flush_tlb_all(); - control_reg_value = __raw_readl(scratchpad_address - + OMAP343X_CONTROL_REG_VALUE_OFFSET); - /* This will enable caches and prediction */ - set_cr(control_reg_value); + /* Read L2 AUX ctrl register */ + asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); + *save++ = 1; + *save++ = val; +} + +static int omap34xx_do_sram_idle(unsigned long save_state) +{ + omap34xx_cpu_suspend(save_state); + return 0; } void omap_sram_idle(void) @@ -352,9 +343,6 @@ void omap_sram_idle(void) int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - if (!_omap_sram_idle) - return; - pwrdm_clear_all_prev_pwrst(mpu_pwrdm); pwrdm_clear_all_prev_pwrst(neon_pwrdm); pwrdm_clear_all_prev_pwrst(core_pwrdm); @@ -432,12 +420,16 @@ void omap_sram_idle(void) sdrc_pwr = sdrc_read_reg(SDRC_POWER); /* - * omap3_arm_context is the location where ARM registers - * get saved. The restore path then reads from this - * location and restores them back. + * omap3_arm_context is the location where some ARM context + * get saved. The rest is placed on the stack, and restored + * from there before resuming. */ - _omap_sram_idle(omap3_arm_context, save_state); - cpu_init(); + if (save_state) + omap34xx_save_context(omap3_arm_context); + if (save_state == 1 || save_state == 3) + cpu_suspend(save_state, omap34xx_do_sram_idle); + else + omap34xx_do_sram_idle(save_state); /* Restore normal SDRC POWER settings */ if (omap_rev() >= OMAP3430_REV_ES3_0 && @@ -445,10 +437,6 @@ void omap_sram_idle(void) core_next_state == PWRDM_POWER_OFF) sdrc_write_reg(sdrc_pwr, SDRC_POWER); - /* Restore table entry modified during MMU restoration */ - if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) - restore_table_entry(); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); @@ -852,10 +840,17 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } +/* + * Push functions to SRAM + * + * The minimum set of functions is pushed to SRAM for execution: + * - omap3_do_wfi for erratum i581 WA, + * - save_secure_ram_context for security extensions. + */ void omap_push_sram_idle(void) { - _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, - omap34xx_cpu_suspend_sz); + omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, save_secure_ram_context_sz); @@ -920,7 +915,6 @@ static int __init omap3_pm_init(void) per_clkdm = clkdm_lookup("per_clkdm"); core_clkdm = clkdm_lookup("core_clkdm"); - omap_push_sram_idle(); #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 63f10669571a..f2ea1bd1c691 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -74,46 +74,6 @@ * API functions */ -/* - * The "get_*restore_pointer" functions are used to provide a - * physical restore address where the ROM code jumps while waking - * up from MPU OFF/OSWR state. - * The restore pointer is stored into the scratchpad. - */ - - .text -/* Function call to get the restore pointer for resume from OFF */ -ENTRY(get_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_restore_pointer) - .align -ENTRY(get_restore_pointer_sz) - .word . - get_restore_pointer - - .text -/* Function call to get the restore pointer for 3630 resume from OFF */ -ENTRY(get_omap3630_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore_3630 - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_omap3630_restore_pointer) - .align -ENTRY(get_omap3630_restore_pointer_sz) - .word . - get_omap3630_restore_pointer - - .text -/* Function call to get the restore pointer for ES3 to resume from OFF */ -ENTRY(get_es3_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore_es3 - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_es3_restore_pointer) - .align -ENTRY(get_es3_restore_pointer_sz) - .word . - get_es3_restore_pointer - .text /* * L2 cache needs to be toggled for stable OFF mode functionality on 3630. @@ -133,7 +93,7 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore) /* Function to call rom code to save secure ram context */ .align 3 ENTRY(save_secure_ram_context) - stmfd sp!, {r1-r12, lr} @ save registers on stack + stmfd sp!, {r4 - r11, lr} @ save registers on stack adr r3, api_params @ r3 points to parameters str r0, [r3,#0x4] @ r0 has sdram address ldr r12, high_mask @@ -152,7 +112,7 @@ ENTRY(save_secure_ram_context) nop nop nop - ldmfd sp!, {r1-r12, pc} + ldmfd sp!, {r4 - r11, pc} .align sram_phy_addr_mask: .word SRAM_BASE_P @@ -179,69 +139,38 @@ ENTRY(save_secure_ram_context_sz) * * * Notes: - * - this code gets copied to internal SRAM at boot and after wake-up - * from OFF mode. The execution pointer in SRAM is _omap_sram_idle. + * - only the minimum set of functions gets copied to internal SRAM at boot + * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function + * pointers in SDRAM or SRAM are called depending on the desired low power + * target state. * - when the OMAP wakes up it continues at different execution points * depending on the low power mode (non-OFF vs OFF modes), * cf. 'Resume path for xxx mode' comments. */ .align 3 ENTRY(omap34xx_cpu_suspend) - stmfd sp!, {r0-r12, lr} @ save registers on stack + stmfd sp!, {r4 - r11, lr} @ save registers on stack /* - * r0 contains CPU context save/restore pointer in sdram - * r1 contains information about saving context: + * r0 contains information about saving context: * 0 - No context lost * 1 - Only L1 and logic lost * 2 - Only L2 lost (Even L1 is retained we clean it along with L2) * 3 - Both L1 and L2 lost and logic lost */ - /* Directly jump to WFI is the context save is not required */ - cmp r1, #0x0 - beq omap3_do_wfi + /* + * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi) + * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram) + */ + ldr r4, omap3_do_wfi_sram_addr + ldr r5, [r4] + cmp r0, #0x0 @ If no context save required, + bxeq r5 @ jump to the WFI code in SRAM + /* Otherwise fall through to the save context code */ save_context_wfi: - mov r8, r0 @ Store SDRAM address in r8 - mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register - mov r4, #0x1 @ Number of parameters for restore call - stmia r8!, {r4-r5} @ Push parameters for restore call - mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register - stmia r8!, {r4-r5} @ Push parameters for restore call - - /* Check what that target sleep state is from r1 */ - cmp r1, #0x2 @ Only L2 lost, no need to save context - beq clean_caches - -l1_logic_lost: - mov r4, sp @ Store sp - mrs r5, spsr @ Store spsr - mov r6, lr @ Store lr - stmia r8!, {r4-r6} - - mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register - mrc p15, 0, r5, c2, c0, 0 @ TTBR0 - mrc p15, 0, r6, c2, c0, 1 @ TTBR1 - mrc p15, 0, r7, c2, c0, 2 @ TTBCR - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mrc p15, 0, r5, c10, c2, 0 @ PRRR - mrc p15, 0, r6, c10, c2, 1 @ NMRR - stmia r8!,{r4-r6} - - mrc p15, 0, r4, c13, c0, 1 @ Context ID - mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - mrs r7, cpsr @ Store current cpsr - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c1, c0, 0 @ save control register - stmia r8!, {r4} - -clean_caches: /* * jump out to kernel flush routine * - reuse that code is better @@ -284,7 +213,32 @@ clean_caches: THUMB( nop ) .arm -omap3_do_wfi: + b omap3_do_wfi + +/* + * Local variables + */ +omap3_do_wfi_sram_addr: + .word omap3_do_wfi_sram +kernel_flush: + .word v7_flush_dcache_all + +/* =================================== + * == WFI instruction => Enter idle == + * =================================== + */ + +/* + * Do WFI instruction + * Includes the resume path for non-OFF modes + * + * This code gets copied to internal SRAM and is accessible + * from both SDRAM and SRAM: + * - executed from SRAM for non-off modes (omap3_do_wfi_sram), + * - executed from SDRAM for OFF mode (omap3_do_wfi). + */ + .align 3 +ENTRY(omap3_do_wfi) ldr r4, sdrc_power @ read the SDRC_POWER register ldr r5, [r4] @ read the contents of SDRC_POWER orr r5, r5, #0x40 @ enable self refresh on idle req @@ -316,8 +270,86 @@ omap3_do_wfi: nop nop nop - bl wait_sdrc_ok +/* + * This function implements the erratum ID i581 WA: + * SDRC state restore before accessing the SDRAM + * + * Only used at return from non-OFF mode. For OFF + * mode the ROM code configures the SDRC and + * the DPLL before calling the restore code directly + * from DDR. + */ + +/* Make sure SDRC accesses are ok */ +wait_sdrc_ok: + +/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ + ldr r4, cm_idlest_ckgen +wait_dpll3_lock: + ldr r5, [r4] + tst r5, #1 + beq wait_dpll3_lock + + ldr r4, cm_idlest1_core +wait_sdrc_ready: + ldr r5, [r4] + tst r5, #0x2 + bne wait_sdrc_ready + /* allow DLL powerdown upon hw idle req */ + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + +/* + * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a + * base instead. + * Be careful not to clobber r7 when maintaing this code. + */ + +is_dll_in_lock_mode: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bne exit_nonoff_modes @ Return if locked + /* wait till dll locks */ + adr r7, kick_counter +wait_dll_lock_timed: + ldr r4, wait_dll_lock_counter + add r4, r4, #1 + str r4, [r7, #wait_dll_lock_counter - kick_counter] + ldr r4, sdrc_dlla_status + /* Wait 20uS for lock */ + mov r6, #8 +wait_dll_lock: + subs r6, r6, #0x1 + beq kick_dll + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + b exit_nonoff_modes @ Return when locked + + /* disable/reenable DLL if not locked */ +kick_dll: + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + mov r6, r5 + bic r6, #(1<<3) @ disable dll + str r6, [r4] + dsb + orr r6, r6, #(1<<3) @ enable dll + str r6, [r4] + dsb + ldr r4, kick_counter + add r4, r4, #1 + str r4, [r7] @ kick_counter + b wait_dll_lock_timed + +exit_nonoff_modes: + /* Re-enable C-bit if needed */ mrc p15, 0, r0, c1, c0, 0 tst r0, #(1 << 2) @ Check C bit enabled? orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared @@ -329,7 +361,32 @@ omap3_do_wfi: * == Exit point from non-OFF modes == * =================================== */ - ldmfd sp!, {r0-r12, pc} @ restore regs and return + ldmfd sp!, {r4 - r11, pc} @ restore regs and return + +/* + * Local variables + */ +sdrc_power: + .word SDRC_POWER_V +cm_idlest1_core: + .word CM_IDLEST1_CORE_V +cm_idlest_ckgen: + .word CM_IDLEST_CKGEN_V +sdrc_dlla_status: + .word SDRC_DLLA_STATUS_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V + /* + * When exporting to userspace while the counters are in SRAM, + * these 2 words need to be at the end to facilitate retrival! + */ +kick_counter: + .word 0 +wait_dll_lock_counter: + .word 0 + +ENTRY(omap3_do_wfi_sz) + .word . - omap3_do_wfi /* @@ -346,13 +403,17 @@ omap3_do_wfi: * restore_es3: applies to 34xx >= ES3.0 * restore_3630: applies to 36xx * restore: common code for 3xxx + * + * Note: when back from CORE and MPU OFF mode we are running + * from SDRAM, without MMU, without the caches and prediction. + * Also the SRAM content has been cleared. */ -restore_es3: +ENTRY(omap3_restore_es3) ldr r5, pm_prepwstst_core_p ldr r4, [r5] and r4, r4, #0x3 cmp r4, #0x0 @ Check if previous power state of CORE is OFF - bne restore + bne omap3_restore @ Fall through to OMAP3 common code adr r0, es3_sdrc_fix ldr r1, sram_base ldr r2, es3_sdrc_fix_sz @@ -364,35 +425,32 @@ copy_to_sram: bne copy_to_sram ldr r1, sram_base blx r1 - b restore + b omap3_restore @ Fall through to OMAP3 common code +ENDPROC(omap3_restore_es3) -restore_3630: +ENTRY(omap3_restore_3630) ldr r1, pm_prepwstst_core_p ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if previous power state of CORE is OFF - bne restore + bne omap3_restore @ Fall through to OMAP3 common code /* Disable RTA before giving control */ ldr r1, control_mem_rta mov r2, #OMAP36XX_RTA_DISABLE str r2, [r1] +ENDPROC(omap3_restore_3630) /* Fall through to common code for the remaining logic */ -restore: +ENTRY(omap3_restore) /* - * Check what was the reason for mpu reset and store the reason in r9: - * 0 - No context lost - * 1 - Only L1 and logic lost - * 2 - Only L2 lost - In this case, we wont be here - * 3 - Both L1 and L2 lost + * Read the pwstctrl register to check the reason for mpu reset. + * This tells us what was lost. */ ldr r1, pm_pwstctrl_mpu ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if target power state was OFF or RET - moveq r9, #0x3 @ MPU OFF => L1 and L2 lost - movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore ldr r0, l2dis_3630 @@ -471,115 +529,39 @@ logic_l1_restore: orr r1, r1, #2 @ re-enable L2 cache mcr p15, 0, r1, c1, c0, 1 skipl2reen: - mov r1, #0 - /* - * Invalidate all instruction caches to PoU - * and flush branch target cache - */ - mcr p15, 0, r1, c7, c5, 0 - ldr r4, scratchpad_base - ldr r3, [r4,#0xBC] - adds r3, r3, #16 - - ldmia r3!, {r4-r6} - mov sp, r4 @ Restore sp - msr spsr_cxsf, r5 @ Restore spsr - mov lr, r6 @ Restore lr - - ldmia r3!, {r4-r7} - mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register - mcr p15, 0, r5, c2, c0, 0 @ TTBR0 - mcr p15, 0, r6, c2, c0, 1 @ TTBR1 - mcr p15, 0, r7, c2, c0, 2 @ TTBCR - - ldmia r3!,{r4-r6} - mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mcr p15, 0, r5, c10, c2, 0 @ PRRR - mcr p15, 0, r6, c10, c2, 1 @ NMRR - - - ldmia r3!,{r4-r7} - mcr p15, 0, r4, c13, c0, 1 @ Context ID - mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - msr cpsr, r7 @ store cpsr - - /* Enabling MMU here */ - mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ - and r7, #0x7 - cmp r7, #0x0 - beq usettbr0 -ttbr_error: - /* - * More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ - b ttbr_error -usettbr0: - mrc p15, 0, r2, c2, c0, 0 - ldr r5, ttbrbit_mask - and r2, r5 - mov r4, pc - ldr r5, table_index_mask - and r4, r5 @ r4 = 31 to 20 bits of pc - /* Extract the value to be written to table entry */ - ldr r1, table_entry - /* r1 has the value to be written to table entry*/ - add r1, r1, r4 - /* Getting the address of table entry to modify */ - lsr r4, #18 - /* r2 has the location which needs to be modified */ - add r2, r4 - /* Storing previous entry of location being modified */ - ldr r5, scratchpad_base - ldr r4, [r2] - str r4, [r5, #0xC0] - /* Modify the table entry */ - str r1, [r2] - /* - * Storing address of entry being modified - * - will be restored after enabling MMU - */ - ldr r5, scratchpad_base - str r2, [r5, #0xC4] - - mov r0, #0 - mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer - mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array - mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB - mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - /* - * Restore control register. This enables the MMU. - * The caches and prediction are not enabled here, they - * will be enabled after restoring the MMU table entry. - */ - ldmia r3!, {r4} - /* Store previous value of control register in scratchpad */ - str r4, [r5, #0xC8] - ldr r2, cache_pred_disable_mask - and r4, r2 - mcr p15, 0, r4, c1, c0, 0 - dsb - isb - ldr r0, =restoremmu_on - bx r0 + /* Now branch to the common CPU resume function */ + b cpu_resume +ENDPROC(omap3_restore) + + .ltorg /* - * ============================== - * == Exit point from OFF mode == - * ============================== + * Local variables */ -restoremmu_on: - ldmfd sp!, {r0-r12, pc} @ restore regs and return - +pm_prepwstst_core_p: + .word PM_PREPWSTST_CORE_P +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sram_base: + .word SRAM_BASE_P + 0x8000 +control_stat: + .word CONTROL_STAT +control_mem_rta: + .word CONTROL_MEM_RTA_CTRL +l2dis_3630: + .word 0 /* * Internal functions */ -/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */ +/* + * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 + * Copied to and run from SRAM in order to reconfigure the SDRC parameters. + */ .text .align 3 ENTRY(es3_sdrc_fix) @@ -609,6 +591,9 @@ ENTRY(es3_sdrc_fix) str r5, [r4] @ kick off refreshes bx lr +/* + * Local variables + */ .align sdrc_syscfg: .word SDRC_SYSCONFIG_P @@ -627,128 +612,3 @@ sdrc_manual_1: ENDPROC(es3_sdrc_fix) ENTRY(es3_sdrc_fix_sz) .word . - es3_sdrc_fix - -/* - * This function implements the erratum ID i581 WA: - * SDRC state restore before accessing the SDRAM - * - * Only used at return from non-OFF mode. For OFF - * mode the ROM code configures the SDRC and - * the DPLL before calling the restore code directly - * from DDR. - */ - -/* Make sure SDRC accesses are ok */ -wait_sdrc_ok: - -/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ - ldr r4, cm_idlest_ckgen -wait_dpll3_lock: - ldr r5, [r4] - tst r5, #1 - beq wait_dpll3_lock - - ldr r4, cm_idlest1_core -wait_sdrc_ready: - ldr r5, [r4] - tst r5, #0x2 - bne wait_sdrc_ready - /* allow DLL powerdown upon hw idle req */ - ldr r4, sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] - -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - -is_dll_in_lock_mode: - /* Is dll in lock mode? */ - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - tst r5, #0x4 - bxne lr @ Return if locked - /* wait till dll locks */ - adr r7, kick_counter -wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] - ldr r4, sdrc_dlla_status - /* Wait 20uS for lock */ - mov r6, #8 -wait_dll_lock: - subs r6, r6, #0x1 - beq kick_dll - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 - bne wait_dll_lock - bx lr @ Return when locked - - /* disable/reenable DLL if not locked */ -kick_dll: - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - mov r6, r5 - bic r6, #(1<<3) @ disable dll - str r6, [r4] - dsb - orr r6, r6, #(1<<3) @ enable dll - str r6, [r4] - dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter - b wait_dll_lock_timed - - .align -cm_idlest1_core: - .word CM_IDLEST1_CORE_V -cm_idlest_ckgen: - .word CM_IDLEST_CKGEN_V -sdrc_dlla_status: - .word SDRC_DLLA_STATUS_V -sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V -pm_prepwstst_core_p: - .word PM_PREPWSTST_CORE_P -pm_pwstctrl_mpu: - .word PM_PWSTCTRL_MPU_P -scratchpad_base: - .word SCRATCHPAD_BASE_P -sram_base: - .word SRAM_BASE_P + 0x8000 -sdrc_power: - .word SDRC_POWER_V -ttbrbit_mask: - .word 0xFFFFC000 -table_index_mask: - .word 0xFFF00000 -table_entry: - .word 0x00000C02 -cache_pred_disable_mask: - .word 0xFFFFE7FB -control_stat: - .word CONTROL_STAT -control_mem_rta: - .word CONTROL_MEM_RTA_CTRL -kernel_flush: - .word v7_flush_dcache_all -l2dis_3630: - .word 0 - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 -ENDPROC(omap34xx_cpu_suspend) - -ENTRY(omap34xx_cpu_suspend_sz) - .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S index 8003037578ed..db7eeebf30d7 100644 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S @@ -120,8 +120,3 @@ 1003: .endm - - .macro irq_prio_table - .endm - - diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index f15afe012995..51558bcee999 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int, long); -extern void pxa27x_cpu_suspend(unsigned int, long); +extern int pxa25x_finish_suspend(unsigned long); +extern int pxa27x_finish_suspend(unsigned long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 87ae3129f4f7..b27544bcafcb 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void) if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && (GPDR(i) & GPIO_bit(i))) { if (GPLR(i) & GPIO_bit(i)) - PGSR(i) |= GPIO_bit(i); + PGSR(gpio_to_bank(i)) |= GPIO_bit(i); else - PGSR(i) &= ~GPIO_bit(i); + PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i); } } diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 65f24f0b77e8..5a5329bc33f1 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -33,6 +33,7 @@ #include <linux/i2c-gpio.h> #include <asm/mach-types.h> +#include <asm/suspend.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 51e1583265b2..37178a8559b1 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state) /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); - cpu_init(); if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fed363cec9c6..9c434d21a271 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,6 +25,7 @@ #include <linux/irq.h> #include <asm/mach/map.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/gpio.h> @@ -244,7 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 2fecbec58d88..9d2400b5f503 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/suspend.h> #include <mach/irqs.h> #include <mach/gpio.h> #include <mach/pxa27x.h> @@ -284,6 +285,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save) void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); +#ifndef CONFIG_IWMMXT + u64 acc0; + + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -299,7 +305,10 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(pwrmode, pxa27x_finish_suspend); +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif break; } } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8521d7d6f1da..ef1c56a67afc 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,6 +24,7 @@ #include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/gpio.h> #include <mach/pxa3xx-regs.h> @@ -141,8 +142,13 @@ static void pxa3xx_cpu_pm_suspend(void) { volatile unsigned long *p = (volatile void *)0xc0000000; unsigned long saved_data = *p; +#ifndef CONFIG_IWMMXT + u64 acc0; - extern void pxa3xx_cpu_suspend(long); + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif + + extern int pxa3xx_finish_suspend(unsigned long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); @@ -162,11 +168,15 @@ static void pxa3xx_cpu_pm_suspend(void) /* overwrite with the resume address */ *p = virt_to_phys(cpu_resume); - pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, pxa3xx_finish_suspend); *p = saved_data; AD3ER = 0; + +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif } static void pxa3xx_cpu_pm_enter(suspend_state_t state) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d130f77b6d11..2f37d43f51b6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = { .xres = 480, .yres = 272, .bpp = 16, - .hsync_len = 4, + .hsync_len = 41, .left_margin = 2, .right_margin = 1, - .vsync_len = 1, + .vsync_len = 10, .upper_margin = 3, .lower_margin = 1, .sync = 0, @@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void) { int ret; - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - - /* Earlier devices had the backlight regulator controlled - * via PWM, later versions use another controller for that */ - if ((system_rev & 0xff) < 2) { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - platform_device_register(&raumfeld_pwm_backlight_device); - } else - platform_device_register(&raumfeld_lt3593_device); - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) pr_warning("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); + msleep(100); + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } + + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); platform_device_register(&pxa3xx_device_gcu); } @@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = { #define SPI_AK4104 \ { \ - .modalias = "ak4104", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ + .modalias = "ak4104-codec", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ .controller_data = (void *) GPIO_SPDIF_CS, \ } diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6f5368899d84..1e544be9905d 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -24,20 +24,9 @@ #ifdef CONFIG_PXA3xx /* - * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) - * - * r0 = v:p offset + * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4) */ -ENTRY(pxa3xx_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r1, r0 - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend - +ENTRY(pxa3xx_finish_suspend) mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep @@ -46,28 +35,18 @@ ENTRY(pxa3xx_cpu_suspend) #ifdef CONFIG_PXA27x /* - * pxa27x_cpu_suspend() + * pxa27x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa27x_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend - +ENTRY(pxa27x_finish_suspend) @ Put the processor to sleep @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -99,21 +78,16 @@ ENTRY(pxa27x_cpu_suspend) #ifdef CONFIG_PXA25x /* - * pxa25x_cpu_suspend() + * pxa25x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa25x_cpu_suspend) - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend +ENTRY(pxa25x_finish_suspend) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -195,16 +169,3 @@ pxa_cpu_do_suspend: mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 20: b 20b @ loop waiting for sleep - -/* - * pxa_cpu_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -pxa_cpu_resume: - ldmfd sp!, {r2, r3} -#ifndef CONFIG_IWMMXT - mar acc0, r2, r3 -#endif - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 00363c7ac182..9b99cc164de5 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -31,6 +31,7 @@ #include <linux/can/platform/mcp251x.h> #include <asm/mach-types.h> +#include <asm/suspend.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -676,7 +677,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend); } #else #define zeus_power_off NULL diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b9a9805e4828..dba6d0c1fc17 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -50,6 +50,7 @@ config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" select CPU_V6 select ARM_GIC + select HAVE_TCM help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 963bf0d8119a..4ae943bafa92 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -68,14 +68,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 752b13a7b3db..f4077efa51fa 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -37,12 +37,10 @@ extern void s3c2412_sleep_enter(void); -static void s3c2412_cpu_suspend(void) +static int s3c2412_cpu_suspend(unsigned long arg) { unsigned long tmp; - flush_cache_all(); - /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); @@ -50,6 +48,8 @@ static void s3c2412_cpu_suspend(void) __raw_writel(tmp, S3C2412_PWRCFG); s3c2412_sleep_enter(); + + panic("sleep resumed to originator?"); } static void s3c2412_pm_prepare(void) diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 41db2b21e213..9ec54f1d8e75 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -24,10 +24,8 @@ extern void s3c2412_sleep_enter(void); -static void s3c2416_cpu_suspend(void) +static int s3c2416_cpu_suspend(unsigned long arg) { - flush_cache_all(); - /* enable wakeup sources regardless of battery state */ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG); @@ -35,6 +33,8 @@ static void s3c2416_cpu_suspend(void) __raw_writel(0x2BED, S3C2443_PWRMODE); s3c2412_sleep_enter(); + + panic("sleep resumed to originator?"); } static void s3c2416_pm_prepare(void) diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dd3120df09fe..fc2dc0b3d4fe 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -552,7 +552,7 @@ struct mini2440_features_t { struct platform_device *optional[8]; }; -static void mini2440_parse_features( +static void __init mini2440_parse_features( struct mini2440_features_t * features, const char * features_str ) { diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 82db072cb836..5e6b42089eb4 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; struct platform_device s3c64xx_device_spi1 = { diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b197171e7d03..204bfafe4bfc 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -113,7 +113,7 @@ found: return chan; } -int s3c2410_dma_config(unsigned int channel, int xferunit) +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) return 0; } -int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -415,7 +415,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_devconfig); -int s3c2410_dma_getposition(unsigned int channel, +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index bc1c470b7de6..8bad64370689 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -112,7 +112,7 @@ void s3c_pm_save_core(void) * this. */ -static void s3c64xx_cpu_suspend(void) +static int s3c64xx_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index 1f87732b2320..34313f9c8792 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -25,29 +25,6 @@ .text - /* s3c_cpu_save - * - * Save enough processor state to allow the restart of the pm.c - * code after resume. - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - @@ call final suspend code - ldr r0, =pm_cpu_sleep - ldr pc, [r0] - - @@ return to the caller, after the MMU is turned on. - @@ restore the last bits of the stack and return. -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save - /* Sleep magic, the word before the resume entry point so that the * bootloader can check for a resumeable image. */ diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index e78ee18c76e3..ac825e826326 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi0_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi1_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; struct platform_device s5p64x0_device_spi1 = { diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 57b19794d9bb..e5d6c4dceb56 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -15,6 +15,7 @@ #include <mach/dma.h> #include <mach/map.h> #include <mach/spi-clocks.h> +#include <mach/irqs.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi1 = { @@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi2 = { diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index e3249a47e3b1..eaf9a7bff7a0 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = { .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; struct platform_device s5pv210_device_spi1 = { diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 24febae3d4c0..309e388a8a83 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(void) +void s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index a3d649466fb1..e3452ccd4b08 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -32,27 +32,6 @@ .text - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - - .ltorg - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index c4661aab22fb..bf85b8b259d5 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -29,10 +29,11 @@ #include <mach/hardware.h> #include <asm/memory.h> +#include <asm/suspend.h> #include <asm/system.h> #include <asm/mach/time.h> -extern void sa1100_cpu_suspend(long); +extern int sa1100_finish_suspend(unsigned long); #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -75,9 +76,7 @@ static int sa11x0_pm_enter(suspend_state_t state) PSPR = virt_to_phys(cpu_resume); /* go zzz */ - sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); - - cpu_init(); + cpu_suspend(0, sa1100_finish_suspend); /* * Ensure not to come back here if it wasn't intended diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 04f2a618d4ef..e8223315b442 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -22,18 +22,13 @@ .text /* - * sa1100_cpu_suspend() + * sa1100_finish_suspend() * * Causes sa11x0 to enter sleep state * */ -ENTRY(sa1100_cpu_suspend) - stmfd sp!, {r4 - r12, lr} @ save registers on stack - mov r1, r0 - ldr r3, =sa1100_cpu_resume @ return function - bl cpu_suspend - +ENTRY(sa1100_finish_suspend) @ disable clock switching mcr p15, 0, r1, c15, c2, 2 @@ -139,13 +134,3 @@ sa1110_sdram_controller_fix: str r13, [r12] 20: b 20b @ loop waiting for sleep - -/* - * cpu_sa1100_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -sa1100_cpu_resume: - mcr p15, 0, r1, c15, c1, 2 @ enable clock switching - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S index e2853c0a3333..0bb6cc626eb7 100644 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ b/arch/arm/mach-shark/include/mach/entry-macro.S @@ -11,17 +11,17 @@ .endm .macro get_irqnr_preamble, base, tmp + mov \base, #0xe0000000 .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xe0000000 mov \irqstat, #0x0C - strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */ - ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7 + strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */ + ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7 and \irqstat, \irqnr, #0x80 teq \irqstat, #0 beq 43f @@ -29,8 +29,8 @@ teq \irqnr, #2 bne 44f 43: mov \irqstat, #0x0C - strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ - ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8 + strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ + ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8 and \irqstat, \irqnr, #0x80 teq \irqstat, #0 beq 44f diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 1e2aba23e0d6..ce5c2513c6ce 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -381,7 +381,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) gpio_set_value(GPIO_PORT114, state); } -static struct sh_mobile_sdhi_info sh_sdhi1_platdata = { +static struct sh_mobile_sdhi_info sh_sdhi1_info = { .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, @@ -413,7 +413,7 @@ static struct platform_device sdhi1_device = { .name = "sh_mobile_sdhi", .id = 1, .dev = { - .platform_data = &sh_sdhi1_platdata, + .platform_data = &sh_sdhi1_info, }, .num_resources = ARRAY_SIZE(sdhi1_resources), .resource = sdhi1_resources, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f6b687f61c28..803bc6edfca4 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = { I2C_BOARD_INFO("imx074", 0x1a), }; -struct soc_camera_link imx074_link = { +static struct soc_camera_link imx074_link = { .bus_id = 0, .board_info = &imx074_info, .i2c_adapter_id = 0, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7e1d37584321..3802f2afabef 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1287,9 +1287,9 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs0_device, &usb1_host_device, &usbhs1_device, + &usbhs0_device, &leds_device, &fsi_device, &fsi_ak4643_device, diff --git a/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h new file mode 100644 index 000000000000..4a81b01f1e8f --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h @@ -0,0 +1,21 @@ +#ifndef SDHI_SH7372_H +#define SDHI_SH7372_H + +#define SDGENCNTA 0xfe40009c + +/* The countdown of SDGENCNTA is controlled by + * ZB3D2CLK which runs at 149.5MHz. + * That is 149.5ticks/us. Approximate this as 150ticks/us. + */ +static void udelay(int us) +{ + __raw_writel(us * 150, SDGENCNTA); + while(__raw_readl(SDGENCNTA)) ; +} + +static void msleep(int ms) +{ + udelay(ms * 1000); +} + +#endif diff --git a/arch/arm/mach-shmobile/include/mach/sdhi.h b/arch/arm/mach-shmobile/include/mach/sdhi.h new file mode 100644 index 000000000000..0ec9e69f2c3b --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sdhi.h @@ -0,0 +1,16 @@ +#ifndef SDHI_H +#define SDHI_H + +/************************************************** + * + * CPU specific settings + * + **************************************************/ + +#ifdef CONFIG_ARCH_SH7372 +#include "mach/sdhi-sh7372.h" +#else +#error "unsupported CPU." +#endif + +#endif /* SDHI_H */ diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index f3888feb1c68..66f980625a33 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -64,10 +64,5 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - shmobile_smp_prepare_cpus(); } diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index b8ae3c978dee..1a594dce8fbc 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -129,14 +129,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 0c527fe2cebb..a33df5f4c27a 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -172,14 +172,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); wakeup_secondary(); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 765a71ff7f3b..bfd32f52c2db 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -229,10 +229,6 @@ static void ct_ca9x4_init_cpu_map(void) static void ct_ca9x4_smp_enable(unsigned int max_cpus) { - int i; - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - scu_enable(MMIO_P2V(A9_MPCORE_SCU)); } #endif diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 245140c0df10..642de0408f25 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -39,9 +39,10 @@ static void __iomem *ic_regbase; static void __iomem *sic_regbase; -static void vt8500_irq_mask(unsigned int irq) +static void vt8500_irq_mask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 edge; if (irq >= 64) { @@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq) } } -static void vt8500_irq_unmask(unsigned int irq) +static void vt8500_irq_unmask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 dctr; if (irq >= 64) { @@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq) writeb(dctr, base + VT8500_IC_DCTR + irq); } -static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { void __iomem *base = ic_regbase; - unsigned int orig_irq = irq; + unsigned irq = d->irq; + unsigned orig_irq = irq; u8 dctr; if (irq >= 64) { @@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) } static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .ack = vt8500_irq_mask, - .mask = vt8500_irq_mask, - .unmask = vt8500_irq_unmask, - .set_type = vt8500_irq_set_type, + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, }; void __init vt8500_init_irq(void) diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S index 4f18f9e87bae..54473cd4aba9 100644 --- a/arch/arm/mm/abort-ev4.S +++ b/arch/arm/mm/abort-ev4.S @@ -3,14 +3,11 @@ /* * Function: v4_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -21,10 +18,8 @@ ENTRY(v4_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r3, [r2] @ read aborted ARM instruction + ldr r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. - mov pc, lr - - + b do_DataAbort diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S index b6282548f922..9da704e7b86e 100644 --- a/arch/arm/mm/abort-ev4t.S +++ b/arch/arm/mm/abort-ev4t.S @@ -4,14 +4,11 @@ /* * Function: v4t_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -22,9 +19,9 @@ ENTRY(v4t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S index 02251b526c0d..a0908d4653a3 100644 --- a/arch/arm/mm/abort-ev5t.S +++ b/arch/arm/mm/abort-ev5t.S @@ -4,14 +4,11 @@ /* * Function: v5t_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -22,10 +19,10 @@ ENTRY(v5t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 @ clear bits 11 of FSR - do_ldrd_abort + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S index bce68d601c8b..4006b7a61264 100644 --- a/arch/arm/mm/abort-ev5tj.S +++ b/arch/arm/mm/abort-ev5tj.S @@ -4,14 +4,11 @@ /* * Function: v5tj_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -23,13 +20,11 @@ ENTRY(v5tj_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR - tst r3, #PSR_J_BIT @ Java? - movne pc, lr - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction - do_ldrd_abort + tst r5, #PSR_J_BIT @ Java? + bne do_DataAbort + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. - mov pc, lr - - + b do_DataAbort diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 1478aa522144..ff1f7cc11f87 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -4,14 +4,11 @@ /* * Function: v6_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -33,16 +30,14 @@ ENTRY(v6_early_abort) * The test below covers all the write situations, including Java bytecodes */ bic r1, r1, #1 << 11 @ clear bit 11 of FSR - tst r3, #PSR_J_BIT @ Java? - movne pc, lr - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction + tst r5, #PSR_J_BIT @ Java? + bne do_DataAbort + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 reveq r3, r3 #endif - do_ldrd_abort + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. - mov pc, lr - - + b do_DataAbort diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index ec88b157d3bb..703375277ba6 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -3,14 +3,11 @@ /* * Function: v7_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. */ @@ -37,18 +34,18 @@ ENTRY(v7_early_abort) ldr r3, =0x40d @ On permission fault and r3, r1, r3 cmp r3, #0x0d - movne pc, lr + bne do_DataAbort mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR isb - mrc p15, 0, r2, c7, c4, 0 @ Read the PAR - and r3, r2, #0x7b @ On translation fault + mrc p15, 0, ip, c7, c4, 0 @ Read the PAR + and r3, ip, #0x7b @ On translation fault cmp r3, #0x0b - movne pc, lr + bne do_DataAbort bic r1, r1, #0xf @ Fix up FSR FS[5:0] - and r2, r2, #0x7e - orr r1, r1, r2, LSR #1 + and ip, ip, #0x7e + orr r1, r1, ip, LSR #1 #endif - mov pc, lr + b do_DataAbort ENDPROC(v7_early_abort) diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 9fb7b0e25ea1..f3982580c273 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -3,14 +3,11 @@ /* * Function: v4t_late_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4-r5, r10-r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -18,7 +15,7 @@ * picture. Unfortunately, this does happen. We live with it. */ ENTRY(v4t_late_abort) - tst r3, #PSR_T_BIT @ check for thumb mode + tst r5, #PSR_T_BIT @ check for thumb mode #ifdef CONFIG_CPU_CP15_MMU mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR @@ -28,7 +25,7 @@ ENTRY(v4t_late_abort) mov r1, #0 #endif bne .data_thumb_abort - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 @@ -47,86 +44,84 @@ ENTRY(v4t_late_abort) /* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist> /* a */ b .data_unknown /* b */ b .data_unknown -/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m -/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable - mov r0, r2 + mov r0, r4 mov r1, r8 - mov r2, sp - bl baddataabort - b ret_from_exception + b baddataabort .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 - and r2, r8, r7, lsl #1 - add r6, r6, r2, lsr #1 - and r2, r8, r7, lsl #2 - add r6, r6, r2, lsr #2 - and r2, r8, r7, lsl #3 - add r6, r6, r2, lsr #3 + and r9, r8, r7, lsl #1 + add r6, r6, r9, lsr #1 + and r9, r8, r7, lsl #2 + add r6, r6, r9, lsr #2 + and r9, r8, r7, lsl #3 + add r6, r6, r9, lsr #3 add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrhpre: tst r8, #1 << 21 @ Check writeback bit - moveq pc, lr @ No writeback -> no fixup + beq do_DataAbort @ No writeback -> no fixup .data_arm_lateldrhpost: - and r5, r8, #0x00f @ get Rm / low nibble of immediate value + and r9, r8, #0x00f @ get Rm / low nibble of immediate value tst r8, #1 << 22 @ if (immediate offset) andne r6, r8, #0xf00 @ { immediate high nibble - orrne r6, r5, r6, lsr #4 @ combine nibbles } else - ldreq r6, [sp, r5, lsl #2] @ { load Rm value } + orrne r6, r9, r6, lsr #4 @ combine nibbles } else + ldreq r6, [r2, r9, lsl #2] @ { load Rm value } .data_arm_apply_r6_and_rn: - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrpreconst: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r2, r8, lsl #20 @ Get offset - moveq pc, lr @ zero -> no fixup - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + movs r6, r8, lsl #20 @ Get offset + beq do_DataAbort @ zero -> no fixup + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r2, lsr #20 @ Undo increment - addeq r7, r7, r2, lsr #20 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + subne r7, r7, r6, lsr #20 @ Undo increment + addeq r7, r7, r6, lsr #20 @ Undo decrement + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrprereg: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction - ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' - mov r5, r8, lsr #7 @ get shift count - ands r5, r5, #31 + ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' + mov r9, r8, lsr #7 @ get shift count + ands r9, r9, #31 and r7, r8, #0x70 @ get shift type orreq r7, r7, #8 @ shift count = 0 add pc, pc, r7 nop - mov r6, r6, lsl r5 @ 0: LSL #!0 + mov r6, r6, lsl r9 @ 0: LSL #!0 b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop @@ -134,7 +129,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ 3: MUL? nop - mov r6, r6, lsr r5 @ 4: LSR #!0 + mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn @@ -142,7 +137,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ 7: MUL? nop - mov r6, r6, asr r5 @ 8: ASR #!0 + mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn @@ -150,7 +145,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ B: MUL? nop - mov r6, r6, ror r5 @ C: ROR #!0 + mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn @@ -159,7 +154,7 @@ ENTRY(v4t_late_abort) b .data_unknown @ F: MUL? .data_thumb_abort: - ldrh r8, [r2] @ read instruction + ldrh r8, [r4] @ read instruction tst r8, #1 << 11 @ L = 1 -> write? orreq r1, r1, #1 << 8 @ yes and r7, r8, #15 << 12 @@ -172,10 +167,10 @@ ENTRY(v4t_late_abort) /* 3 */ b .data_unknown /* 4 */ b .data_unknown /* 5 */ b .data_thumb_reg -/* 6 */ mov pc, lr -/* 7 */ mov pc, lr -/* 8 */ mov pc, lr -/* 9 */ mov pc, lr +/* 6 */ b do_DataAbort +/* 7 */ b do_DataAbort +/* 8 */ b do_DataAbort +/* 9 */ b do_DataAbort /* A */ b .data_unknown /* B */ b .data_thumb_pushpop /* C */ b .data_thumb_ldmstm @@ -185,41 +180,41 @@ ENTRY(v4t_late_abort) .data_thumb_reg: tst r8, #1 << 9 - moveq pc, lr + beq do_DataAbort tst r8, #1 << 10 @ If 'S' (signed) bit is set movne r1, #0 @ it must be a load instr - mov pc, lr + b do_DataAbort .data_thumb_pushpop: tst r8, #1 << 10 beq .data_unknown and r6, r8, #0x55 @ hweight8(r8) + R bit - and r2, r8, #0xaa - add r6, r6, r2, lsr #1 - and r2, r6, #0xcc + and r9, r8, #0xaa + add r6, r6, r9, lsr #1 + and r9, r6, #0xcc and r6, r6, #0x33 - add r6, r6, r2, lsr #2 + add r6, r6, r9, lsr #2 movs r7, r8, lsr #9 @ C = r8 bit 8 (R bit) adc r6, r6, r6, lsr #4 @ high + low nibble + R bit and r6, r6, #15 @ number of regs to transfer - ldr r7, [sp, #13 << 2] + ldr r7, [r2, #13 << 2] tst r8, #1 << 11 addeq r7, r7, r6, lsl #2 @ increment SP if PUSH subne r7, r7, r6, lsl #2 @ decrement SP if POP - str r7, [sp, #13 << 2] - mov pc, lr + str r7, [r2, #13 << 2] + b do_DataAbort .data_thumb_ldmstm: and r6, r8, #0x55 @ hweight8(r8) - and r2, r8, #0xaa - add r6, r6, r2, lsr #1 - and r2, r6, #0xcc + and r9, r8, #0xaa + add r6, r6, r9, lsr #1 + and r9, r6, #0xcc and r6, r6, #0x33 - add r6, r6, r2, lsr #2 + add r6, r6, r9, lsr #2 add r6, r6, r6, lsr #4 - and r5, r8, #7 << 8 - ldr r7, [sp, r5, lsr #6] + and r9, r8, #7 << 8 + ldr r7, [r2, r9, lsr #6] and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement - str r7, [sp, r5, lsr #6] - mov pc, lr + str r7, [r2, r9, lsr #6] + b do_DataAbort diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index d7cb1bfa51a4..52162d59407a 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -9,34 +9,32 @@ * */ - .macro do_thumb_abort - tst r3, #PSR_T_BIT + .macro do_thumb_abort, fsr, pc, psr, tmp + tst \psr, #PSR_T_BIT beq not_thumb - ldrh r3, [r2] @ Read aborted Thumb instruction - and r3, r3, # 0xfe00 @ Mask opcode field - cmp r3, # 0x5600 @ Is it ldrsb? - orreq r3, r3, #1 << 11 @ Set L-bit if yes - tst r3, #1 << 11 @ L = 0 -> write - orreq r1, r1, #1 << 11 @ yes. - mov pc, lr + ldrh \tmp, [\pc] @ Read aborted Thumb instruction + and \tmp, \tmp, # 0xfe00 @ Mask opcode field + cmp \tmp, # 0x5600 @ Is it ldrsb? + orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes + tst \tmp, #1 << 11 @ L = 0 -> write + orreq \psr, \psr, #1 << 11 @ yes. + b do_DataAbort not_thumb: .endm /* - * We check for the following insturction encoding for LDRD. + * We check for the following instruction encoding for LDRD. * - * [27:25] == 0 + * [27:25] == 000 * [7:4] == 1101 * [20] == 0 */ - .macro do_ldrd_abort - tst r3, #0x0e000000 @ [27:25] == 0 + .macro do_ldrd_abort, tmp, insn + tst \insn, #0x0e100000 @ [27:25,20] == 0 bne not_ldrd - and r2, r3, #0x000000f0 @ [7:4] == 1101 - cmp r2, #0x000000d0 - bne not_ldrd - tst r3, #1 << 20 @ [20] == 0 - moveq pc, lr + and \tmp, \insn, #0x000000f0 @ [7:4] == 1101 + cmp \tmp, #0x000000d0 + beq do_DataAbort not_ldrd: .endm diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S index 625e580945b5..119cb479c2ab 100644 --- a/arch/arm/mm/abort-nommu.S +++ b/arch/arm/mm/abort-nommu.S @@ -3,11 +3,11 @@ /* * Function: nommu_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = 0 (abort address) - * : r1 = 0 (FSR) + * Returns : r4 - r11, r13 preserved * * Note: There is no FSR/FAR on !CPU_CP15_MMU cores. * Just fill zero into the registers. @@ -16,5 +16,5 @@ ENTRY(nommu_early_abort) mov r0, #0 @ clear r0, r1 (no FSR/FAR) mov r1, #0 - mov pc, lr + b do_DataAbort ENDPROC(nommu_early_abort) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 724ba3bce72c..be7c638b648b 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -727,6 +727,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) int isize = 4; int thumb2_32b = 0; + if (interrupts_enabled(regs)) + local_irq_enable(); + instrptr = instruction_pointer(regs); fs = get_fs(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index ef59099a5463..44c086710d2b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -120,17 +120,22 @@ static void l2x0_cache_sync(void) spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_all(void) +static void __l2x0_flush_all(void) { - unsigned long flags; - - /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); debug_writel(0x03); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); cache_sync(); debug_writel(0x00); +} + +static void l2x0_flush_all(void) +{ + unsigned long flags; + + /* clean all ways */ + spin_lock_irqsave(&l2x0_lock, flags); + __l2x0_flush_all(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -266,7 +271,9 @@ static void l2x0_disable(void) unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); - writel(0, l2x0_base + L2X0_CTRL); + __l2x0_flush_all(); + writel_relaxed(0, l2x0_base + L2X0_CTRL); + dsb(); spin_unlock_irqrestore(&l2x0_lock, flags); } diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index bdba6c65c901..63cca0097130 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -41,7 +41,6 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, kfrom = kmap_atomic(from, KM_USER0); kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); - __cpuc_flush_dcache_area(kto, PAGE_SIZE); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bc0e1d88fd3b..55657c222d7c 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -94,7 +94,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr) pud = pud_offset(pgd, addr); if (PTRS_PER_PUD != 1) - printk(", *pud=%08lx", pud_val(*pud)); + printk(", *pud=%08llx", (long long)pud_val(*pud)); if (pud_none(*pud)) break; @@ -285,6 +285,10 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) tsk = current; mm = tsk->mm; + /* Enable interrupts if they were enabled in the parent context. */ + if (interrupts_enabled(regs)) + local_irq_enable(); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 17d6cd0c57ed..e5ab4362322f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -432,6 +432,17 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) return pages; } +/* + * Poison init memory with an undefined instruction (ARM) or a branch to an + * undefined instruction (Thumb). + */ +static inline void poison_init_mem(void *s, size_t count) +{ + u32 *p = (u32 *)s; + while ((count = count - 4)) + *p++ = 0xe7fddef0; +} + static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn) { @@ -649,8 +660,8 @@ void __init mem_init(void) " pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n" #endif " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" - " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .text : 0x%p" " - 0x%p" " (%4d kB)\n" + " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .data : 0x%p" " - 0x%p" " (%4d kB)\n" " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", @@ -672,8 +683,8 @@ void __init mem_init(void) #endif MLM(MODULES_VADDR, MODULES_END), - MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), + MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_sdata, _edata), MLK_ROUNDUP(__bss_start, __bss_stop)); @@ -714,11 +725,13 @@ void free_initmem(void) #ifdef CONFIG_HAVE_TCM extern char __tcm_start, __tcm_end; + poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start); totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), __phys_to_pfn(__pa(&__tcm_end)), "TCM link"); #endif + poison_init_mem(__init_begin, __init_end - __init_begin); if (!machine_is_integrator() && !machine_is_cintegrator()) totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), __phys_to_pfn(__pa(__init_end)), @@ -731,10 +744,12 @@ static int keep_initrd; void free_initrd_mem(unsigned long start, unsigned long end) { - if (!keep_initrd) + if (!keep_initrd) { + poison_init_mem((void *)start, PAGE_ALIGN(end) - start); totalram_pages += free_area(__phys_to_pfn(__pa(start)), __phys_to_pfn(__pa(end)), "initrd"); + } } static int __init keepinitrd_setup(char *__unused) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d9e736c2b4f..594d677b92c8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc); static phys_addr_t lowmem_limit __initdata = 0; -static void __init sanity_check_meminfo(void) +void __init sanity_check_meminfo(void) { int i, j, highmem = 0; @@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + memblock_set_current_limit(lowmem_limit); + build_mem_type_table(); - sanity_check_meminfo(); prepare_page_table(); map_lowmem(); devicemaps_init(mdesc); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 687d02319a41..941a98c9e8aa 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void) memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } +void __init sanity_check_meminfo(void) +{ +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S index 87970eba88ea..8bbff025269a 100644 --- a/arch/arm/mm/pabort-legacy.S +++ b/arch/arm/mm/pabort-legacy.S @@ -4,16 +4,18 @@ /* * Function: legacy_pabort * - * Params : r0 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = Simulated IFSR with section translation fault status + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ .align 5 ENTRY(legacy_pabort) + mov r0, r4 mov r1, #5 - mov pc, lr + b do_PrefetchAbort ENDPROC(legacy_pabort) diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S index 06e3d1ef2115..9627646ce783 100644 --- a/arch/arm/mm/pabort-v6.S +++ b/arch/arm/mm/pabort-v6.S @@ -4,16 +4,18 @@ /* * Function: v6_pabort * - * Params : r0 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = IFSR + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ .align 5 ENTRY(v6_pabort) + mov r0, r4 mrc p15, 0, r1, c5, c0, 1 @ get IFSR - mov pc, lr + b do_PrefetchAbort ENDPROC(v6_pabort) diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S index a8b3b300a18d..875761f44f3b 100644 --- a/arch/arm/mm/pabort-v7.S +++ b/arch/arm/mm/pabort-v7.S @@ -2,12 +2,13 @@ #include <asm/assembler.h> /* - * Function: v6_pabort + * Function: v7_pabort * - * Params : r0 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = IFSR + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ @@ -16,5 +17,5 @@ ENTRY(v7_pabort) mrc p15, 0, r0, c6, c0, 2 @ get IFAR mrc p15, 0, r1, c5, c0, 1 @ get IFSR - mov pc, lr + b do_PrefetchAbort ENDPROC(v7_pabort) diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 5f79dc4ce3fb..50e3543d03bf 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -29,19 +29,19 @@ ENTRY(cpu_arm7_dcache_clean_area) /* * Function: arm6_7_data_abort () * - * Params : r2 = address of aborted instruction - * : sp = pointer to registers + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * * Purpose : obtain information about current aborted instruction * - * Returns : r0 = address of abort - * : r1 = FSR + * Returns : r4-r5, r10-r11, r13 preserved */ ENTRY(cpu_arm7_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 @@ -49,7 +49,7 @@ ENTRY(cpu_arm7_data_abort) nop /* 0 */ b .data_unknown -/* 1 */ mov pc, lr @ swp +/* 1 */ b do_DataAbort @ swp /* 2 */ b .data_unknown /* 3 */ b .data_unknown /* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m @@ -60,87 +60,85 @@ ENTRY(cpu_arm7_data_abort) /* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist> /* a */ b .data_unknown /* b */ b .data_unknown -/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m -/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable - mov r0, r2 + mov r0, r4 mov r1, r8 - mov r2, sp - bl baddataabort - b ret_from_exception + b baddataabort ENTRY(cpu_arm6_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #14 << 24 teq r7, #8 << 24 @ was it ldm/stm - movne pc, lr + bne do_DataAbort .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 - and r2, r8, r7, lsl #1 - add r6, r6, r2, lsr #1 - and r2, r8, r7, lsl #2 - add r6, r6, r2, lsr #2 - and r2, r8, r7, lsl #3 - add r6, r6, r2, lsr #3 + and r9, r8, r7, lsl #1 + add r6, r6, r9, lsr #1 + and r9, r8, r7, lsl #2 + add r6, r6, r9, lsr #2 + and r9, r8, r7, lsl #3 + add r6, r6, r9, lsr #3 add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_apply_r6_and_rn: - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrpreconst: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r2, r8, lsl #20 @ Get offset - moveq pc, lr @ zero -> no fixup - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + movs r6, r8, lsl #20 @ Get offset + beq do_DataAbort @ zero -> no fixup + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r2, lsr #20 @ Undo increment - addeq r7, r7, r2, lsr #20 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + subne r7, r7, r6, lsr #20 @ Undo increment + addeq r7, r7, r6, lsr #20 @ Undo decrement + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrprereg: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction - ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' - mov r5, r8, lsr #7 @ get shift count - ands r5, r5, #31 + ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' + mov r9, r8, lsr #7 @ get shift count + ands r9, r9, #31 and r7, r8, #0x70 @ get shift type orreq r7, r7, #8 @ shift count = 0 add pc, pc, r7 nop - mov r6, r6, lsl r5 @ 0: LSL #!0 + mov r6, r6, lsl r9 @ 0: LSL #!0 b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop @@ -148,7 +146,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ 3: MUL? nop - mov r6, r6, lsr r5 @ 4: LSR #!0 + mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn @@ -156,7 +154,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ 7: MUL? nop - mov r6, r6, asr r5 @ 8: ASR #!0 + mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn @@ -164,7 +162,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ B: MUL? nop - mov r6, r6, ror r5 @ C: ROR #!0 + mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 184a9c997e36..e9c47271732d 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -34,7 +34,7 @@ */ #define DCACHELINESIZE 32 - __INIT + .section .text /* * cpu_sa1100_proc_init() @@ -45,8 +45,6 @@ ENTRY(cpu_sa1100_proc_init) mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland mov pc, lr - .section .text - /* * cpu_sa1100_proc_fin() * diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S index 9694f1f6f485..d887a31faaae 100644 --- a/arch/arm/mm/tlb-fa.S +++ b/arch/arm/mm/tlb-fa.S @@ -46,7 +46,6 @@ ENTRY(fa_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB mcr p15, 0, r3, c7, c10, 4 @ data write barrier mov pc, lr @@ -60,9 +59,8 @@ ENTRY(fa_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB mcr p15, 0, r3, c7, c10, 4 @ data write barrier - mcr p15, 0, r3, c7, c5, 4 @ prefetch flush + mcr p15, 0, r3, c7, c5, 4 @ prefetch flush (isb) mov pc, lr __INITDATA diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 73d7d89b04c4..ffe06a69a6e5 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -54,7 +54,6 @@ ENTRY(v6wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier mov pc, lr @@ -83,9 +82,8 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier - mcr p15, 0, r2, c7, c5, 4 @ prefetch flush + mcr p15, 0, r2, c7, c5, 4 @ prefetch flush (isb) mov pc, lr __INIT diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 53cd5b454673..86bb71664508 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -48,9 +48,6 @@ ENTRY(v7wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov ip, #0 - ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable - ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB dsb mov pc, lr ENDPROC(v7wbi_flush_user_tlb_range) @@ -75,9 +72,6 @@ ENTRY(v7wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov r2, #0 - ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable - ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB dsb isb mov pc, lr diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 2e49e71b1b98..066d464d322d 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -78,7 +78,3 @@ movs \irqnr, \irqnr #endif .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 6af3d0b1f8d0..363c91e44efb 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -394,20 +394,15 @@ void omap3_sram_restore_context(void) } #endif /* CONFIG_PM */ -static int __init omap34xx_sram_init(void) -{ - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); - return 0; -} -#else +#endif /* CONFIG_ARCH_OMAP3 */ + static inline int omap34xx_sram_init(void) { +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + omap3_sram_restore_context(); +#endif return 0; } -#endif int __init omap_sram_init(void) { diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 5b4fffab1eb4..41ab97ebe4cf 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; ct->regs.ack = GPIO_EDGE_CAUSE_OFF; ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_clr_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index 48ebb9479b61..a11dc3670505 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c) return container_of(c, struct pxa_gpio_chip, chip)->regbase; } -static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio) +static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) { return &pxa_gpio_chips[gpio_to_bank(gpio)]; } @@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) int gpio = irq_to_gpio(d->irq); unsigned long gpdr, mask = GPIO_bit(gpio); - c = gpio_to_chip(gpio); + c = gpio_to_pxachip(gpio); if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or @@ -230,7 +230,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) static void pxa_ack_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); } @@ -238,7 +238,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d) static void pxa_mask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); uint32_t grer, gfer; c->irq_mask &= ~GPIO_bit(gpio); @@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); c->irq_mask |= GPIO_bit(gpio); update_edge_detect(c); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2abf9660bc6c..539bd0e3defd 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; @@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) } int -s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1021,23 +1021,19 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * xfersize: size of unit in bytes (1,2,4) */ -int s3c2410_dma_config(unsigned int channel, +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int dcon; - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __func__, channel, xferunit, dcon); + pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon = chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __func__, dcon); + pr_debug("%s: dcon is %08x\n", __func__, dcon); switch (chan->req_ch) { case DMACH_I2S_IN: @@ -1104,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -1177,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); * returns the current transfer points for the dma source and destination */ -int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) /* restore channel's hardware configuration */ if (!cp->in_use) - return 0; + return; printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); @@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) if (cp->map != NULL) dma_sel.select(cp, cp->map); - - return 0; } static void s3c2410_dma_resume(void) diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index fd7032f84ae7..c56612569b40 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -41,31 +41,6 @@ .text - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - @@ jump to final code to send system to sleep - ldr r0, =pm_cpu_sleep - @@ldr pc, [ r0 ] - ldr r0, [ r0 ] - mov pc, r0 - - @@ return to the caller, after having the MMU - @@ turned on, this restores the last bits from the - @@ stack -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } - - .ltorg - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 135abda31c9a..327ab9f662e8 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -152,7 +152,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) if (!gc) return -ENOMEM; ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p_gpioint_set_type, diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index 899a8cc011ff..612934c48b0d 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void) clock_rate = clk_get_rate(tin_source); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + if (clocksource_register_hz(&time_clocksource, clock_rate)) panic("%s: can't register clocksource\n", time_clocksource.name); } diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c index cb459dd95459..6143aa147688 100644 --- a/arch/arm/plat-samsung/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) * irq? */ -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_opfn); -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 4af108ff4112..e3b31c26ac3e 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -12,6 +12,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __PLAT_DEVS_H +#define __PLAT_DEVS_H __FILE__ + #include <linux/platform_device.h> struct s3c24xx_uart_resources { @@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97; */ extern void *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev); + +#endif /* __PLAT_DEVS_H */ diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 2e8f8c6560d7..8c273b7a6f56 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -42,6 +42,7 @@ struct s3c2410_dma_client { }; struct s3c2410_dma_chan; +enum dma_ch; /* s3c2410_dma_cbfn_t * @@ -62,7 +63,7 @@ typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, * request a dma channel exclusivley */ -extern int s3c2410_dma_request(unsigned int channel, +extern int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *, void *dev); @@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel, * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); +extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * * set the channel's flags to a given state */ -extern int s3c2410_dma_setflags(unsigned int channel, +extern int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags); /* s3c2410_dma_free @@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel, * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); +extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); * drained before the buffer is given to the DMA system. */ -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, +extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size); /* s3c2410_dma_config @@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id, * configure the dma channel */ -extern int s3c2410_dma_config(unsigned int channel, int xferunit); +extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); /* s3c2410_dma_devconfig * * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(unsigned int channel, +extern int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition @@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel, * get the position that the dma transfer is currently at */ -extern int s3c2410_dma_getposition(unsigned int channel, +extern int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dest); -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); +extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 7fb6f6be8c81..f6749916d194 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -42,7 +42,7 @@ extern unsigned long s3c_irqwake_eintallow; /* per-cpu sleep functions */ extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); +extern int (*pm_cpu_sleep)(unsigned long); /* Flags for PM Control */ @@ -52,10 +52,9 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern int s3c_cpu_save(unsigned long *saveblk, long); extern void s3c_cpu_resume(void); -extern void s3c2410_cpu_suspend(void); +extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 0ffe34a21554..4c16fa3621bb 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo { * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit + * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; @@ -53,6 +54,7 @@ struct s3c64xx_spi_info { int fifo_lvl_mask; int rx_lvl_offset; int high_speed; + int tx_st_done; }; /** diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0958e3..657405c481d0 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -54,8 +54,15 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); + + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, uirq->base_irq); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->regs.ack = S3C64XX_UINTP; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index a607546ddbd0..f714d060370d 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); + + if (!s3c_tgc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", + __func__, timer_irq); + return; + } + ct = s3c_tgc->chip_types; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 5c0a440d6e16..5fa1742d019b 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/map.h> @@ -231,7 +232,7 @@ static void __maybe_unused s3c_pm_show_resume_irqs(int start, void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); +int (*pm_cpu_sleep)(unsigned long); #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) @@ -294,15 +295,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_arch_stop_clocks(); - /* s3c_cpu_save will also act as our return point from when + /* this will also act as our return point from when * we resume as it saves its own register state and restores it * during the resume. */ - s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET); - - /* restore the cpu state using the kernel's cpu init code. */ - - cpu_init(); + cpu_suspend(0, pm_cpu_sleep); /* restore the system state */ diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 9897dcfc16d6..2d30c7f6edd3 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -77,27 +77,27 @@ ENTRY(vfp_support_entry) bne look_for_VFP_exceptions @ VFP is already enabled DBGSTR1 "enable %x", r10 - ldr r3, last_VFP_context_address + ldr r3, vfp_current_hw_state_address orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set - ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer + ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled - cmp r4, r10 - beq check_for_exception @ we are returning to the same - @ process, so the registers are - @ still there. In this case, we do - @ not want to drop a pending exception. + cmp r4, r10 @ this thread owns the hw context? +#ifndef CONFIG_SMP + @ For UP, checking that this thread owns the hw context is + @ sufficient to determine that the hardware state is valid. + beq vfp_hw_state_valid + + @ On UP, we lazily save the VFP context. As a different + @ thread wants ownership of the VFP hardware, save the old + @ state if there was a previous (valid) owner. VFPFMXR FPEXC, r5 @ enable VFP, disable any pending @ exceptions, so we can get at the @ rest of it -#ifndef CONFIG_SMP - @ Save out the current registers to the old thread state - @ No need for SMP since this is not done lazily - DBGSTR1 "save old state %p", r4 - cmp r4, #0 - beq no_old_VFP_process + cmp r4, #0 @ if the vfp_current_hw_state is NULL + beq vfp_reload_hw @ then the hw state needs reloading VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status #ifndef CONFIG_CPU_FEROCEON @@ -110,13 +110,35 @@ ENTRY(vfp_support_entry) 1: #endif stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 - @ and point r4 at the word at the - @ start of the register dump +vfp_reload_hw: + +#else + @ For SMP, if this thread does not own the hw context, then we + @ need to reload it. No need to save the old state as on SMP, + @ we always save the state when we switch away from a thread. + bne vfp_reload_hw + + @ This thread has ownership of the current hardware context. + @ However, it may have been migrated to another CPU, in which + @ case the saved state is newer than the hardware context. + @ Check this by looking at the CPU number which the state was + @ last loaded onto. + ldr ip, [r10, #VFP_CPU] + teq ip, r11 + beq vfp_hw_state_valid + +vfp_reload_hw: + @ We're loading this threads state into the VFP hardware. Update + @ the CPU number which contains the most up to date VFP context. + str r11, [r10, #VFP_CPU] + + VFPFMXR FPEXC, r5 @ enable VFP, disable any pending + @ exceptions, so we can get at the + @ rest of it #endif -no_old_VFP_process: DBGSTR1 "load state %p", r10 - str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer + str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer @ Load the saved state back into the VFP VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state @@ -132,7 +154,8 @@ no_old_VFP_process: #endif VFPFMXR FPSCR, r5 @ restore status -check_for_exception: +@ The context stored in the VFP hardware is up to date with this thread +vfp_hw_state_valid: tst r1, #FPEXC_EX bne process_exception @ might as well handle the pending @ exception before retrying branch @@ -207,8 +230,8 @@ ENTRY(vfp_save_state) ENDPROC(vfp_save_state) .align -last_VFP_context_address: - .word last_VFP_context +vfp_current_hw_state_address: + .word vfp_current_hw_state .macro tbl_branch, base, tmp, shift #ifdef CONFIG_THUMB2_KERNEL diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f25e7ec89416..0a96f71f0abd 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -33,7 +33,6 @@ void vfp_support_entry(void); void vfp_null_entry(void); void (*vfp_vector)(void) = vfp_null_entry; -union vfp_state *last_VFP_context[NR_CPUS]; /* * Dual-use variable. @@ -43,6 +42,46 @@ union vfp_state *last_VFP_context[NR_CPUS]; unsigned int VFP_arch; /* + * The pointer to the vfpstate structure of the thread which currently + * owns the context held in the VFP hardware, or NULL if the hardware + * context is invalid. + * + * For UP, this is sufficient to tell which thread owns the VFP context. + * However, for SMP, we also need to check the CPU number stored in the + * saved state too to catch migrations. + */ +union vfp_state *vfp_current_hw_state[NR_CPUS]; + +/* + * Is 'thread's most up to date state stored in this CPUs hardware? + * Must be called from non-preemptible context. + */ +static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread) +{ +#ifdef CONFIG_SMP + if (thread->vfpstate.hard.cpu != cpu) + return false; +#endif + return vfp_current_hw_state[cpu] == &thread->vfpstate; +} + +/* + * Force a reload of the VFP context from the thread structure. We do + * this by ensuring that access to the VFP hardware is disabled, and + * clear last_VFP_context. Must be called from non-preemptible context. + */ +static void vfp_force_reload(unsigned int cpu, struct thread_info *thread) +{ + if (vfp_state_in_hw(cpu, thread)) { + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + vfp_current_hw_state[cpu] = NULL; + } +#ifdef CONFIG_SMP + thread->vfpstate.hard.cpu = NR_CPUS; +#endif +} + +/* * Per-thread VFP initialization. */ static void vfp_thread_flush(struct thread_info *thread) @@ -50,21 +89,27 @@ static void vfp_thread_flush(struct thread_info *thread) union vfp_state *vfp = &thread->vfpstate; unsigned int cpu; - memset(vfp, 0, sizeof(union vfp_state)); - - vfp->hard.fpexc = FPEXC_EN; - vfp->hard.fpscr = FPSCR_ROUND_NEAREST; - /* * Disable VFP to ensure we initialize it first. We must ensure - * that the modification of last_VFP_context[] and hardware disable - * are done for the same CPU and without preemption. + * that the modification of vfp_current_hw_state[] and hardware + * disable are done for the same CPU and without preemption. + * + * Do this first to ensure that preemption won't overwrite our + * state saving should access to the VFP be enabled at this point. */ cpu = get_cpu(); - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (vfp_current_hw_state[cpu] == vfp) + vfp_current_hw_state[cpu] = NULL; fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); put_cpu(); + + memset(vfp, 0, sizeof(union vfp_state)); + + vfp->hard.fpexc = FPEXC_EN; + vfp->hard.fpscr = FPSCR_ROUND_NEAREST; +#ifdef CONFIG_SMP + vfp->hard.cpu = NR_CPUS; +#endif } static void vfp_thread_exit(struct thread_info *thread) @@ -73,8 +118,8 @@ static void vfp_thread_exit(struct thread_info *thread) union vfp_state *vfp = &thread->vfpstate; unsigned int cpu = get_cpu(); - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (vfp_current_hw_state[cpu] == vfp) + vfp_current_hw_state[cpu] = NULL; put_cpu(); } @@ -84,6 +129,9 @@ static void vfp_thread_copy(struct thread_info *thread) vfp_sync_hwstate(parent); thread->vfpstate = parent->vfpstate; +#ifdef CONFIG_SMP + thread->vfpstate.hard.cpu = NR_CPUS; +#endif } /* @@ -129,17 +177,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * case the thread migrates to a different CPU. The * restoring is done lazily. */ - if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) { - vfp_save_state(last_VFP_context[cpu], fpexc); - last_VFP_context[cpu]->hard.cpu = cpu; - } - /* - * Thread migration, just force the reloading of the - * state on the new CPU in case the VFP registers - * contain stale data. - */ - if (thread->vfpstate.hard.cpu != cpu) - last_VFP_context[cpu] = NULL; + if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) + vfp_save_state(vfp_current_hw_state[cpu], fpexc); #endif /* @@ -415,7 +454,7 @@ static int vfp_pm_suspend(void) } /* clear any information we had about last context state */ - memset(last_VFP_context, 0, sizeof(last_VFP_context)); + memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state)); return 0; } @@ -443,15 +482,15 @@ static void vfp_pm_init(void) static inline void vfp_pm_init(void) { } #endif /* CONFIG_PM */ +/* + * Ensure that the VFP state stored in 'thread->vfpstate' is up to date + * with the hardware state. + */ void vfp_sync_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); - /* - * If the thread we're interested in is the current owner of the - * hardware VFP state, then we need to save its state. - */ - if (last_VFP_context[cpu] == &thread->vfpstate) { + if (vfp_state_in_hw(cpu, thread)) { u32 fpexc = fmrx(FPEXC); /* @@ -465,36 +504,13 @@ void vfp_sync_hwstate(struct thread_info *thread) put_cpu(); } +/* Ensure that the thread reloads the hardware VFP state on the next use. */ void vfp_flush_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); - /* - * If the thread we're interested in is the current owner of the - * hardware VFP state, then we need to save its state. - */ - if (last_VFP_context[cpu] == &thread->vfpstate) { - u32 fpexc = fmrx(FPEXC); - - fmxr(FPEXC, fpexc & ~FPEXC_EN); - - /* - * Set the context to NULL to force a reload the next time - * the thread uses the VFP. - */ - last_VFP_context[cpu] = NULL; - } + vfp_force_reload(cpu, thread); -#ifdef CONFIG_SMP - /* - * For SMP we still have to take care of the case where the thread - * migrates to another CPU and then back to the original CPU on which - * the last VFP user is still the same thread. Mark the thread VFP - * state as belonging to a non-existent CPU so that the saved one will - * be reloaded in the above case. - */ - thread->vfpstate.hard.cpu = NR_CPUS; -#endif put_cpu(); } @@ -513,8 +529,7 @@ static int vfp_hotplug(struct notifier_block *b, unsigned long action, void *hcpu) { if (action == CPU_DYING || action == CPU_DYING_FROZEN) { - unsigned int cpu = (long)hcpu; - last_VFP_context[cpu] = NULL; + vfp_force_reload((long)hcpu, current_thread_info()); } else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) vfp_enable(NULL); return NOTIFY_OK; diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index c018696765d4..5c74eb797f08 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/spinlock.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/irq.h> #include <asm/i8259.h> @@ -215,14 +215,13 @@ spurious_8259A_irq: } } -static int i8259A_resume(struct sys_device *dev) +static void i8259A_resume(void) { if (i8259A_auto_eoi >= 0) init_8259A(i8259A_auto_eoi); - return 0; } -static int i8259A_shutdown(struct sys_device *dev) +static void i8259A_shutdown(void) { /* Put the i8259A into a quiescent state that * the kernel initialization code can get it @@ -232,26 +231,17 @@ static int i8259A_shutdown(struct sys_device *dev) outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ } - return 0; } -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", +static struct syscore_ops i8259_syscore_ops = { .resume = i8259A_resume, .shutdown = i8259A_shutdown, }; -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - static int __init i8259A_init_sysfs(void) { - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; + register_syscore_ops(&i8259_syscore_ops); + return 0; } device_initcall(i8259A_init_sysfs); diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 33867ec4a234..9d6a8effeda2 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -12,6 +12,8 @@ #include <linux/of.h> #include <linux/memblock.h> #include <linux/vmalloc.h> +#include <linux/memory.h> + #include <asm/firmware.h> #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> @@ -20,24 +22,25 @@ static unsigned long get_memblock_size(void) { struct device_node *np; - unsigned int memblock_size = 0; + unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE; + struct resource r; np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); if (np) { - const unsigned long *size; + const __be64 *size; size = of_get_property(np, "ibm,lmb-size", NULL); - memblock_size = size ? *size : 0; - + if (size) + memblock_size = be64_to_cpup(size); of_node_put(np); - } else { + } else if (machine_is(pseries)) { + /* This fallback really only applies to pseries */ unsigned int memzero_size = 0; - const unsigned int *regs; np = of_find_node_by_path("/memory@0"); if (np) { - regs = of_get_property(np, "reg", NULL); - memzero_size = regs ? regs[3] : 0; + if (!of_address_to_resource(np, 0, &r)) + memzero_size = resource_size(&r); of_node_put(np); } @@ -50,16 +53,21 @@ static unsigned long get_memblock_size(void) sprintf(buf, "/memory@%x", memzero_size); np = of_find_node_by_path(buf); if (np) { - regs = of_get_property(np, "reg", NULL); - memblock_size = regs ? regs[3] : 0; + if (!of_address_to_resource(np, 0, &r)) + memblock_size = resource_size(&r); of_node_put(np); } } } - return memblock_size; } +/* WARNING: This is going to override the generic definition whenever + * pseries is built-in regardless of what platform is active at boot + * time. This is fine for now as this is the only "option" and it + * should work everywhere. If not, we'll have to turn this into a + * ppc_md. callback + */ unsigned long memory_block_size_bytes(void) { return get_memblock_size(); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f03338c2f088..bbdeb48bbf8e 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -348,6 +348,7 @@ config CPU_SUBTYPE_SH7720 select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -357,6 +358,7 @@ config CPU_SUBTYPE_SH7721 select CPU_HAS_DSP select SYS_SUPPORTS_CMT select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -440,6 +442,7 @@ config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. @@ -467,7 +470,9 @@ config CPU_SUBTYPE_SH7786 select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD select USB_ARCH_HAS_EHCI + select USB_EHCI_SH if USB_EHCI_HCD config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig index 33ddb130a7c8..cfde98ddb29d 100644 --- a/arch/sh/configs/sh7757lcr_defconfig +++ b/arch/sh/configs/sh7757lcr_defconfig @@ -9,7 +9,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y @@ -39,8 +38,6 @@ CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y @@ -56,18 +53,19 @@ CONFIG_SH_ETH=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=3 CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y CONFIG_SPI_SH=y # CONFIG_HWMON is not set -CONFIG_MFD_SH_MOBILE_SDHI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SH=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_SH=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHI=y diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 423dabf542d3..e915deafac89 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -183,7 +183,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0x1f4b0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -197,7 +197,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0x1f4c0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -211,7 +211,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0x1f4d0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, @@ -228,7 +228,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC0_RX, .addr = 0x1e500013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -242,7 +242,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC1_RX, .addr = 0x1e510013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -256,7 +256,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC2_RX, .addr = 0x1e520013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xa2, }, @@ -265,12 +265,12 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { .addr = 0x1e530012, .chcr = SM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xab, + .mid_rid = 0xa9, }, { .slave_id = SHDMA_SLAVE_RIIC3_RX, .addr = 0x1e530013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xaf, }, @@ -279,14 +279,14 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { .addr = 0x1e540012, .chcr = SM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xc1, + .mid_rid = 0xc5, }, { .slave_id = SHDMA_SLAVE_RIIC4_RX, .addr = 0x1e540013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xc2, + .mid_rid = 0xc6, }, }; @@ -301,7 +301,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC5_RX, .addr = 0x1e550013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -315,7 +315,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC6_RX, .addr = 0x1e560013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -329,7 +329,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC7_RX, .addr = 0x1e570013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, @@ -343,7 +343,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC8_RX, .addr = 0x1e580013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x46, }, @@ -357,7 +357,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC9_RX, .addr = 0x1e590013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x52, }, @@ -659,6 +659,54 @@ static struct platform_device spi0_device = { .resource = spi0_resources, }; +static struct resource usb_ehci_resources[] = { + [0] = { + .start = 0xfe4f1000, + .end = 0xfe4f10ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .end = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ehci_device = { + .name = "sh_ehci", + .id = -1, + .dev = { + .dma_mask = &usb_ehci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ehci_resources), + .resource = usb_ehci_resources, +}; + +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xfe4f1800, + .end = 0xfe4f18ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .end = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + static struct platform_device *sh7757_devices[] __initdata = { &scif2_device, &scif3_device, @@ -670,6 +718,8 @@ static struct platform_device *sh7757_devices[] __initdata = { &dma2_device, &dma3_device, &spi0_device, + &usb_ehci_device, + &usb_ohci_device, }; static int __init sh7757_devices_setup(void) @@ -1039,13 +1089,13 @@ static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups, /* Support for external interrupt pins in IRQ mode */ static struct intc_vect vectors_irq0123[] __initdata = { - INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), - INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), + INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240), + INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0), }; static struct intc_vect vectors_irq4567[] __initdata = { - INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), - INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), + INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340), + INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0), }; static struct intc_sense_reg sense_registers[] __initdata = { @@ -1079,14 +1129,14 @@ static struct intc_vect vectors_irl0123[] __initdata = { }; static struct intc_vect vectors_irl4567[] __initdata = { - INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20), - INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60), - INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0), - INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0), - INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20), - INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60), - INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0), - INTC_VECT(IRL4_HHHL, 0xcc0), + INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220), + INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260), + INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0), + INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0), + INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320), + INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360), + INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0), + INTC_VECT(IRL4_HHHL, 0x3c0), }; static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123, diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 91971103b62b..a3ee91971129 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -13,6 +13,7 @@ #include <linux/seq_file.h> #include <linux/ftrace.h> #include <linux/delay.h> +#include <linux/ratelimit.h> #include <asm/processor.h> #include <asm/machvec.h> #include <asm/uaccess.h> @@ -268,9 +269,8 @@ void migrate_irqs(void) unsigned int newcpu = cpumask_any_and(data->affinity, cpu_online_mask); if (newcpu >= nr_cpu_ids) { - if (printk_ratelimit()) - printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", - irq, cpu); + pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n", + irq, cpu); cpumask_setall(data->affinity); newcpu = cpumask_any_and(data->affinity, diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c index b2595b8548ee..620fa7ff9eec 100644 --- a/arch/sh/mm/alignment.c +++ b/arch/sh/mm/alignment.c @@ -13,6 +13,7 @@ #include <linux/seq_file.h> #include <linux/proc_fs.h> #include <linux/uaccess.h> +#include <linux/ratelimit.h> #include <asm/alignment.h> #include <asm/processor.h> @@ -95,13 +96,13 @@ int set_unalign_ctl(struct task_struct *tsk, unsigned int val) void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn, struct pt_regs *regs) { - if (user_mode(regs) && (se_usermode & UM_WARN) && printk_ratelimit()) - pr_notice("Fixing up unaligned userspace access " + if (user_mode(regs) && (se_usermode & UM_WARN)) + pr_notice_ratelimited("Fixing up unaligned userspace access " "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", tsk->comm, task_pid_nr(tsk), (void *)instruction_pointer(regs), insn); - else if (se_kernmode_warn && printk_ratelimit()) - pr_notice("Fixing up unaligned kernel access " + else if (se_kernmode_warn) + pr_notice_ratelimited("Fixing up unaligned kernel access " "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", tsk->comm, task_pid_nr(tsk), (void *)instruction_pointer(regs), insn); diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h index d4d0711de0f9..14848909e0de 100644 --- a/arch/sparc/include/asm/irqflags_32.h +++ b/arch/sparc/include/asm/irqflags_32.h @@ -18,7 +18,7 @@ extern void arch_local_irq_restore(unsigned long); extern unsigned long arch_local_irq_save(void); extern void arch_local_irq_enable(void); -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,17 +26,17 @@ static inline unsigned long arch_local_save_flags(void) return flags; } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { arch_local_irq_save(); } -static inline bool arch_irqs_disabled_flags(unsigned long flags) +static inline notrace bool arch_irqs_disabled_flags(unsigned long flags) { return (flags & PSR_PIL) != 0; } -static inline bool arch_irqs_disabled(void) +static inline notrace bool arch_irqs_disabled(void) { return arch_irqs_disabled_flags(arch_local_save_flags()); } diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h index aab969c82c2b..23cd27f6beb4 100644 --- a/arch/sparc/include/asm/irqflags_64.h +++ b/arch/sparc/include/asm/irqflags_64.h @@ -14,7 +14,7 @@ #ifndef __ASSEMBLY__ -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,7 +26,7 @@ static inline unsigned long arch_local_save_flags(void) return flags; } -static inline void arch_local_irq_restore(unsigned long flags) +static inline notrace void arch_local_irq_restore(unsigned long flags) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -36,7 +36,7 @@ static inline void arch_local_irq_restore(unsigned long flags) ); } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -46,7 +46,7 @@ static inline void arch_local_irq_disable(void) ); } -static inline void arch_local_irq_enable(void) +static inline notrace void arch_local_irq_enable(void) { __asm__ __volatile__( "wrpr 0, %%pil" @@ -56,17 +56,17 @@ static inline void arch_local_irq_enable(void) ); } -static inline int arch_irqs_disabled_flags(unsigned long flags) +static inline notrace int arch_irqs_disabled_flags(unsigned long flags) { return (flags > 0); } -static inline int arch_irqs_disabled(void) +static inline notrace int arch_irqs_disabled(void) { return arch_irqs_disabled_flags(arch_local_save_flags()); } -static inline unsigned long arch_local_irq_save(void) +static inline notrace unsigned long arch_local_irq_save(void) { unsigned long flags, tmp; diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 9fe08a1ea6c6..f445e98463e6 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -293,7 +293,7 @@ maybe_smp4m_msg: WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE - sll %o3, 28, %o2 ! shift for simpler checks below + srl %o3, 28, %o2 ! shift for simpler checks below maybe_smp4m_msg_check_single: andcc %o2, 0x1, %g0 beq,a maybe_smp4m_msg_check_mask diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c index c0e01297e64e..e485a6804998 100644 --- a/arch/sparc/mm/leon_mm.c +++ b/arch/sparc/mm/leon_mm.c @@ -226,7 +226,7 @@ void leon3_getCacheRegs(struct leon3_cacheregs *regs) * Leon2 and Leon3 differ in their way of telling cache information * */ -int leon_flush_needed(void) +int __init leon_flush_needed(void) { int flush_needed = -1; unsigned int ssize, sets; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index da349723d411..37357a599dca 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1170,7 +1170,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" - depends on NUMA && PCI + depends on X86_64 && NUMA && PCI ---help--- Enable AMD NUMA node topology detection. You should say Y here if you have a multi processor AMD system. This uses an old method to diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h index 2fefa501d3ba..af60d8a2e288 100644 --- a/arch/x86/include/asm/apb_timer.h +++ b/arch/x86/include/asm/apb_timer.h @@ -62,7 +62,7 @@ extern int sfi_mtimer_num; #else /* CONFIG_APB_TIMER */ static inline unsigned long apbt_quick_calibrate(void) {return 0; } -static inline void apbt_time_init(void) {return 0; } +static inline void apbt_time_init(void) { } #endif #endif /* ASM_X86_APBT_H */ diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 224e8c5eb307..ffa037f28d39 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -57,6 +57,8 @@ static inline int pfn_valid(int pfn) return 0; } +#define early_pfn_valid(pfn) pfn_valid((pfn)) + #endif /* CONFIG_DISCONTIGMEM */ #ifdef CONFIG_NEED_MULTIPLE_NODES diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index ead21b663117..b4fd836e4053 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -28,6 +28,8 @@ pmode_cr3: .long 0 /* Saved %cr3 */ pmode_cr4: .long 0 /* Saved %cr4 */ pmode_efer: .quad 0 /* Saved EFER */ pmode_gdt: .quad 0 +pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ +pmode_behavior: .long 0 /* Wakeup behavior flags */ realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 @@ -91,6 +93,18 @@ wakeup_code: /* Call the C code */ calll main + /* Restore MISC_ENABLE before entering protected mode, in case + BIOS decided to clear XD_DISABLE during S3. */ + movl pmode_behavior, %eax + btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax + jnc 1f + + movl pmode_misc_en, %eax + movl pmode_misc_en + 4, %edx + movl $MSR_IA32_MISC_ENABLE, %ecx + wrmsr +1: + /* Do any other stuff... */ #ifndef CONFIG_64BIT diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index e1828c07e79c..97a29e1430e3 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -21,6 +21,9 @@ struct wakeup_header { u32 pmode_efer_low; /* Protected mode EFER */ u32 pmode_efer_high; u64 pmode_gdt; + u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */ + u32 pmode_misc_en_high; + u32 pmode_behavior; /* Wakeup routine behavior flags */ u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ @@ -39,4 +42,7 @@ extern struct wakeup_header wakeup_header; #define WAKEUP_HEADER_SIGNATURE 0x51ee1111 #define WAKEUP_END_SIGNATURE 0x65a22c82 +/* Wakeup behavior bits */ +#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 + #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 18a857ba7a25..103b6ab368d3 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -77,6 +77,12 @@ int acpi_suspend_lowlevel(void) header->pmode_cr0 = read_cr0(); header->pmode_cr4 = read_cr4_safe(); + header->pmode_behavior = 0; + if (!rdmsr_safe(MSR_IA32_MISC_ENABLE, + &header->pmode_misc_en_low, + &header->pmode_misc_en_high)) + header->pmode_behavior |= + (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE); header->realmode_flags = acpi_realmode_flags; header->real_magic = 0x12345678; diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 0c016f727695..14eed214b584 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -294,6 +294,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), }, }, + { /* Handle reboot issue on Acer Aspire one */ + .callback = set_bios_reboot, + .ident = "Acer Aspire One A110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), + }, + }, { } }; @@ -411,6 +419,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), }, }, + { /* Handle problems with rebooting on the Latitude E6320. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6320", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), + }, + }, { } }; diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index d865c4aeec55..bbaaa005bf0e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -28,6 +28,7 @@ #include <linux/poison.h> #include <linux/dma-mapping.h> #include <linux/module.h> +#include <linux/memory.h> #include <linux/memory_hotplug.h> #include <linux/nmi.h> #include <linux/gfp.h> @@ -895,8 +896,6 @@ const char *arch_vma_name(struct vm_area_struct *vma) } #ifdef CONFIG_X86_UV -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) - unsigned long memory_block_size_bytes(void) { if (is_uv_system()) { diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index cf9750004a08..68894fdc034b 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -112,8 +112,10 @@ static void nmi_cpu_start(void *dummy) static int nmi_start(void) { get_online_cpus(); - on_each_cpu(nmi_cpu_start, NULL, 1); ctr_running = 1; + /* make ctr_running visible to the nmi handler: */ + smp_mb(); + on_each_cpu(nmi_cpu_start, NULL, 1); put_online_cpus(); return 0; } @@ -504,15 +506,18 @@ static int nmi_setup(void) nmi_enabled = 0; ctr_running = 0; - barrier(); + /* make variables visible to the nmi handler: */ + smp_mb(); err = register_die_notifier(&profile_exceptions_nb); if (err) goto fail; get_online_cpus(); register_cpu_notifier(&oprofile_cpu_nb); - on_each_cpu(nmi_cpu_setup, NULL, 1); nmi_enabled = 1; + /* make nmi_enabled visible to the nmi handler: */ + smp_mb(); + on_each_cpu(nmi_cpu_setup, NULL, 1); put_online_cpus(); return 0; @@ -531,7 +536,8 @@ static void nmi_shutdown(void) nmi_enabled = 0; ctr_running = 0; put_online_cpus(); - barrier(); + /* make variables visible to the nmi handler: */ + smp_mb(); unregister_die_notifier(&profile_exceptions_nb); msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 8214724ce54d..f567965c0620 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -327,7 +327,7 @@ int __init pci_xen_hvm_init(void) } #ifdef CONFIG_XEN_DOM0 -static int xen_register_pirq(u32 gsi, int triggering) +static int xen_register_pirq(u32 gsi, int gsi_override, int triggering) { int rc, pirq, irq = -1; struct physdev_map_pirq map_irq; @@ -344,16 +344,18 @@ static int xen_register_pirq(u32 gsi, int triggering) shareable = 1; name = "ioapic-level"; } - pirq = xen_allocate_pirq_gsi(gsi); if (pirq < 0) goto out; - irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); + if (gsi_override >= 0) + irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name); + else + irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); if (irq < 0) goto out; - printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq); + printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi); map_irq.domid = DOMID_SELF; map_irq.type = MAP_PIRQ_TYPE_GSI; @@ -370,7 +372,7 @@ out: return irq; } -static int xen_register_gsi(u32 gsi, int triggering, int polarity) +static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity) { int rc, irq; struct physdev_setup_gsi setup_gsi; @@ -381,7 +383,7 @@ static int xen_register_gsi(u32 gsi, int triggering, int polarity) printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", gsi, triggering, polarity); - irq = xen_register_pirq(gsi, triggering); + irq = xen_register_pirq(gsi, gsi_override, triggering); setup_gsi.gsi = gsi; setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); @@ -403,6 +405,8 @@ static __init void xen_setup_acpi_sci(void) int rc; int trigger, polarity; int gsi = acpi_sci_override_gsi; + int irq = -1; + int gsi_override = -1; if (!gsi) return; @@ -419,7 +423,25 @@ static __init void xen_setup_acpi_sci(void) printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d " "polarity=%d\n", gsi, trigger, polarity); - gsi = xen_register_gsi(gsi, trigger, polarity); + /* Before we bind the GSI to a Linux IRQ, check whether + * we need to override it with bus_irq (IRQ) value. Usually for + * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) + * but there are oddballs where the IRQ != GSI: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) + * which ends up being: gsi_to_irq[9] == 20 + * (which is what acpi_gsi_to_irq ends up calling when starting the + * the ACPI interpreter and keels over since IRQ 9 has not been + * setup as we had setup IRQ 20 for it). + */ + /* Check whether the GSI != IRQ */ + if (acpi_gsi_to_irq(gsi, &irq) == 0) { + if (irq >= 0 && irq != gsi) + /* Bugger, we MUST have that IRQ. */ + gsi_override = irq; + } + + gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity); printk(KERN_INFO "xen: acpi sci %d\n", gsi); return; @@ -428,7 +450,7 @@ static __init void xen_setup_acpi_sci(void) static int acpi_register_gsi_xen(struct device *dev, u32 gsi, int trigger, int polarity) { - return xen_register_gsi(gsi, trigger, polarity); + return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity); } static int __init pci_xen_initial_domain(void) @@ -467,7 +489,7 @@ void __init xen_setup_pirqs(void) if (acpi_get_override_irq(irq, &trigger, &polarity) == -1) continue; - xen_register_pirq(irq, + xen_register_pirq(irq, -1 /* no GSI override */, trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE); } } diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 474356b98ede..899e393d8e73 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -504,9 +504,6 @@ void __init efi_init(void) x86_platform.set_wallclock = efi_set_rtc_mmss; #endif - /* Setup for EFI runtime service */ - reboot_type = BOOT_EFI; - #if EFI_DEBUG print_efi_memmap(); #endif diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 673e968df3cf..0ccccb67a993 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1232,7 +1232,11 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, { struct { struct mmuext_op op; +#ifdef CONFIG_SMP DECLARE_BITMAP(mask, num_processors); +#else + DECLARE_BITMAP(mask, NR_CPUS); +#endif } *args; struct multicall_space mcs; |