summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/Kconfig.debug14
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/marco-evb.dts54
-rw-r--r--arch/arm/boot/dts/marco.dtsi756
-rw-r--r--arch/arm/configs/prima2_defconfig3
-rw-r--r--arch/arm/mach-prima2/Kconfig10
-rw-r--r--arch/arm/mach-prima2/Makefile5
-rw-r--r--arch/arm/mach-prima2/common.c45
-rw-r--r--arch/arm/mach-prima2/common.h15
-rw-r--r--arch/arm/mach-prima2/headsmp.S79
-rw-r--r--arch/arm/mach-prima2/hotplug.c41
-rw-r--r--arch/arm/mach-prima2/include/mach/irqs.h4
-rw-r--r--arch/arm/mach-prima2/include/mach/uart.h6
-rw-r--r--arch/arm/mach-prima2/include/mach/uncompress.h3
-rw-r--r--arch/arm/mach-prima2/irq.c16
-rw-r--r--arch/arm/mach-prima2/l2x0.c29
-rw-r--r--arch/arm/mach-prima2/platsmp.c163
-rw-r--r--arch/arm/mach-prima2/rstc.c45
-rw-r--r--arch/arm/mach-prima2/rtciobrg.c1
-rw-r--r--arch/arm/mach-prima2/timer-marco.c316
-rw-r--r--arch/arm/mach-prima2/timer-prima2.c (renamed from arch/arm/mach-prima2/timer.c)6
22 files changed, 1580 insertions, 33 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 31fe86d52608..a3ffd1a391a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -393,6 +393,7 @@ config ARCH_GEMINI
config ARCH_SIRF
bool "CSR SiRF"
select ARCH_REQUIRE_GPIOLIB
+ select AUTO_ZRELADDR
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index bbb0a670cd1a..af3987cb9e4d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -386,6 +386,20 @@ choice
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
+ config DEBUG_SIRFPRIMA2_UART1
+ bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+ depends on ARCH_PRIMA2
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the uart1 port on SiRFprimaII devices.
+
+ config DEBUG_SIRFMARCO_UART1
+ bool "Kernel low-level debugging messages via SiRFmarco UART1"
+ depends on ARCH_MARCO
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the uart1 port on SiRFmarco devices.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3212573b94e7..b34479014f9e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb \
kirkwood-openblocks_a6.dtb
+dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts
new file mode 100644
index 000000000000..5130aeacfca5
--- /dev/null
+++ b/arch/arm/boot/dts/marco-evb.dts
@@ -0,0 +1,54 @@
+/*
+ * DTS file for CSR SiRFmarco Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "marco.dtsi"
+
+/ {
+ model = "CSR SiRFmarco Evaluation Board";
+ compatible = "sirf,marco-cb", "sirf,marco";
+
+ memory {
+ reg = <0x40000000 0x60000000>;
+ };
+
+ axi {
+ peri-iobg {
+ uart1: uart@cc060000 {
+ status = "okay";
+ };
+ uart2: uart@cc070000 {
+ status = "okay";
+ };
+ i2c0: i2c@cc0e0000 {
+ status = "okay";
+ fpga-cpld@4d {
+ compatible = "sirf,fpga-cpld";
+ reg = <0x4d>;
+ };
+ };
+ spi1: spi@cc170000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ spi@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ pci-iobg {
+ sd0: sdhci@cd000000 {
+ bus-width = <8>;
+ status = "okay";
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
new file mode 100644
index 000000000000..1579c3491ccd
--- /dev/null
+++ b/arch/arm/boot/dts/marco.dtsi
@@ -0,0 +1,756 @@
+/*
+ * DTS file for CSR SiRFmarco SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+ compatible = "sirf,marco";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x40000000 0x40000000 0xa0000000>;
+
+ l2-cache-controller@c0030000 {
+ compatible = "sirf,marco-pl310-cache", "arm,pl310-cache";
+ reg = <0xc0030000 0x1000>;
+ interrupts = <0 59 0>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <1 1 1>;
+ arm,filter-ranges = <0x40000000 0x80000000>;
+ };
+
+ gic: interrupt-controller@c0011000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xc0011000 0x1000>,
+ <0xc0010100 0x0100>;
+ };
+
+ rstc-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc2000000 0xc2000000 0x1000000>;
+
+ reset-controller@c2000000 {
+ compatible = "sirf,marco-rstc";
+ reg = <0xc2000000 0x10000>;
+ };
+ };
+
+ sys-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc3000000 0xc3000000 0x1000000>;
+
+ clock-controller@c3000000 {
+ compatible = "sirf,marco-clkc";
+ reg = <0xc3000000 0x1000>;
+ interrupts = <0 3 0>;
+ };
+
+ rsc-controller@c3010000 {
+ compatible = "sirf,marco-rsc";
+ reg = <0xc3010000 0x1000>;
+ };
+ };
+
+ mem-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc4000000 0xc4000000 0x1000000>;
+
+ memory-controller@c4000000 {
+ compatible = "sirf,marco-memc";
+ reg = <0xc4000000 0x10000>;
+ interrupts = <0 27 0>;
+ };
+ };
+
+ disp-iobg0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc5000000 0xc5000000 0x1000000>;
+
+ display0@c5000000 {
+ compatible = "sirf,marco-lcd";
+ reg = <0xc5000000 0x10000>;
+ interrupts = <0 30 0>;
+ };
+
+ vpp0@c5010000 {
+ compatible = "sirf,marco-vpp";
+ reg = <0xc5010000 0x10000>;
+ interrupts = <0 31 0>;
+ };
+ };
+
+ disp-iobg1 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc6000000 0xc6000000 0x1000000>;
+
+ display1@c6000000 {
+ compatible = "sirf,marco-lcd";
+ reg = <0xc6000000 0x10000>;
+ interrupts = <0 62 0>;
+ };
+
+ vpp1@c6010000 {
+ compatible = "sirf,marco-vpp";
+ reg = <0xc6010000 0x10000>;
+ interrupts = <0 63 0>;
+ };
+ };
+
+ graphics-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc8000000 0xc8000000 0x1000000>;
+
+ graphics@c8000000 {
+ compatible = "powervr,sgx540";
+ reg = <0xc8000000 0x1000000>;
+ interrupts = <0 6 0>;
+ };
+ };
+
+ multimedia-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc9000000 0xc9000000 0x1000000>;
+
+ multimedia@a0000000 {
+ compatible = "sirf,marco-video-codec";
+ reg = <0xc9000000 0x1000000>;
+ interrupts = <0 5 0>;
+ };
+ };
+
+ dsp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xca000000 0xca000000 0x2000000>;
+
+ dspif@ca000000 {
+ compatible = "sirf,marco-dspif";
+ reg = <0xca000000 0x10000>;
+ interrupts = <0 9 0>;
+ };
+
+ gps@ca010000 {
+ compatible = "sirf,marco-gps";
+ reg = <0xca010000 0x10000>;
+ interrupts = <0 7 0>;
+ };
+
+ dsp@cb000000 {
+ compatible = "sirf,marco-dsp";
+ reg = <0xcb000000 0x1000000>;
+ interrupts = <0 8 0>;
+ };
+ };
+
+ peri-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xcc000000 0xcc000000 0x2000000>;
+
+ timer@cc020000 {
+ compatible = "sirf,marco-tick";
+ reg = <0xcc020000 0x1000>;
+ interrupts = <0 0 0>,
+ <0 1 0>,
+ <0 2 0>,
+ <0 49 0>,
+ <0 50 0>,
+ <0 51 0>;
+ };
+
+ nand@cc030000 {
+ compatible = "sirf,marco-nand";
+ reg = <0xcc030000 0x10000>;
+ interrupts = <0 41 0>;
+ };
+
+ audio@cc040000 {
+ compatible = "sirf,marco-audio";
+ reg = <0xcc040000 0x10000>;
+ interrupts = <0 35 0>;
+ };
+
+ uart0: uart@cc050000 {
+ cell-index = <0>;
+ compatible = "sirf,marco-uart";
+ reg = <0xcc050000 0x1000>;
+ interrupts = <0 17 0>;
+ fifosize = <128>;
+ status = "disabled";
+ };
+
+ uart1: uart@cc060000 {
+ cell-index = <1>;
+ compatible = "sirf,marco-uart";
+ reg = <0xcc060000 0x1000>;
+ interrupts = <0 18 0>;
+ fifosize = <32>;
+ status = "disabled";
+ };
+
+ uart2: uart@cc070000 {
+ cell-index = <2>;
+ compatible = "sirf,marco-uart";
+ reg = <0xcc070000 0x1000>;
+ interrupts = <0 19 0>;
+ fifosize = <128>;
+ status = "disabled";
+ };
+
+ uart3: uart@cc190000 {
+ cell-index = <3>;
+ compatible = "sirf,marco-uart";
+ reg = <0xcc190000 0x1000>;
+ interrupts = <0 66 0>;
+ fifosize = <128>;
+ status = "disabled";
+ };
+
+ uart4: uart@cc1a0000 {
+ cell-index = <4>;
+ compatible = "sirf,marco-uart";
+ reg = <0xcc1a0000 0x1000>;
+ interrupts = <0 69 0>;
+ fifosize = <128>;
+ status = "disabled";
+ };
+
+ usp0: usp@cc080000 {
+ cell-index = <0>;
+ compatible = "sirf,marco-usp";
+ reg = <0xcc080000 0x10000>;
+ interrupts = <0 20 0>;
+ status = "disabled";
+ };
+
+ usp1: usp@cc090000 {
+ cell-index = <1>;
+ compatible = "sirf,marco-usp";
+ reg = <0xcc090000 0x10000>;
+ interrupts = <0 21 0>;
+ status = "disabled";
+ };
+
+ usp2: usp@cc0a0000 {
+ cell-index = <2>;
+ compatible = "sirf,marco-usp";
+ reg = <0xcc0a0000 0x10000>;
+ interrupts = <0 22 0>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@cc0b0000 {
+ cell-index = <0>;
+ compatible = "sirf,marco-dmac";
+ reg = <0xcc0b0000 0x10000>;
+ interrupts = <0 12 0>;
+ };
+
+ dmac1: dma-controller@cc160000 {
+ cell-index = <1>;
+ compatible = "sirf,marco-dmac";
+ reg = <0xcc160000 0x10000>;
+ interrupts = <0 13 0>;
+ };
+
+ vip@cc0c0000 {
+ compatible = "sirf,marco-vip";
+ reg = <0xcc0c0000 0x10000>;
+ };
+
+ spi0: spi@cc0d0000 {
+ cell-index = <0>;
+ compatible = "sirf,marco-spi";
+ reg = <0xcc0d0000 0x10000>;
+ interrupts = <0 15 0>;
+ sirf,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio 0 0>;
+ sirf,spi-dma-rx-channel = <25>;
+ sirf,spi-dma-tx-channel = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@cc170000 {
+ cell-index = <1>;
+ compatible = "sirf,marco-spi";
+ reg = <0xcc170000 0x10000>;
+ interrupts = <0 16 0>;
+ sirf,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio 0 0>;
+ sirf,spi-dma-rx-channel = <12>;
+ sirf,spi-dma-tx-channel = <13>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@cc0e0000 {
+ cell-index = <0>;
+ compatible = "sirf,marco-i2c";
+ reg = <0xcc0e0000 0x10000>;
+ interrupts = <0 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@cc0f0000 {
+ cell-index = <1>;
+ compatible = "sirf,marco-i2c";
+ reg = <0xcc0f0000 0x10000>;
+ interrupts = <0 25 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ tsc@cc110000 {
+ compatible = "sirf,marco-tsc";
+ reg = <0xcc110000 0x10000>;
+ interrupts = <0 33 0>;
+ };
+
+ gpio: pinctrl@cc120000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,marco-pinctrl";
+ reg = <0xcc120000 0x10000>;
+ interrupts = <0 43 0>,
+ <0 44 0>,
+ <0 45 0>,
+ <0 46 0>,
+ <0 47 0>;
+ gpio-controller;
+ interrupt-controller;
+
+ lcd_16pins_a: lcd0_0 {
+ lcd {
+ sirf,pins = "lcd_16bitsgrp";
+ sirf,function = "lcd_16bits";
+ };
+ };
+ lcd_18pins_a: lcd0_1 {
+ lcd {
+ sirf,pins = "lcd_18bitsgrp";
+ sirf,function = "lcd_18bits";
+ };
+ };
+ lcd_24pins_a: lcd0_2 {
+ lcd {
+ sirf,pins = "lcd_24bitsgrp";
+ sirf,function = "lcd_24bits";
+ };
+ };
+ lcdrom_pins_a: lcdrom0_0 {
+ lcd {
+ sirf,pins = "lcdromgrp";
+ sirf,function = "lcdrom";
+ };
+ };
+ uart0_pins_a: uart0_0 {
+ uart {
+ sirf,pins = "uart0grp";
+ sirf,function = "uart0";
+ };
+ };
+ uart1_pins_a: uart1_0 {
+ uart {
+ sirf,pins = "uart1grp";
+ sirf,function = "uart1";
+ };
+ };
+ uart2_pins_a: uart2_0 {
+ uart {
+ sirf,pins = "uart2grp";
+ sirf,function = "uart2";
+ };
+ };
+ uart2_noflow_pins_a: uart2_1 {
+ uart {
+ sirf,pins = "uart2_nostreamctrlgrp";
+ sirf,function = "uart2_nostreamctrl";
+ };
+ };
+ spi0_pins_a: spi0_0 {
+ spi {
+ sirf,pins = "spi0grp";
+ sirf,function = "spi0";
+ };
+ };
+ spi1_pins_a: spi1_0 {
+ spi {
+ sirf,pins = "spi1grp";
+ sirf,function = "spi1";
+ };
+ };
+ i2c0_pins_a: i2c0_0 {
+ i2c {
+ sirf,pins = "i2c0grp";
+ sirf,function = "i2c0";
+ };
+ };
+ i2c1_pins_a: i2c1_0 {
+ i2c {
+ sirf,pins = "i2c1grp";
+ sirf,function = "i2c1";
+ };
+ };
+ pwm0_pins_a: pwm0_0 {
+ pwm {
+ sirf,pins = "pwm0grp";
+ sirf,function = "pwm0";
+ };
+ };
+ pwm1_pins_a: pwm1_0 {
+ pwm {
+ sirf,pins = "pwm1grp";
+ sirf,function = "pwm1";
+ };
+ };
+ pwm2_pins_a: pwm2_0 {
+ pwm {
+ sirf,pins = "pwm2grp";
+ sirf,function = "pwm2";
+ };
+ };
+ pwm3_pins_a: pwm3_0 {
+ pwm {
+ sirf,pins = "pwm3grp";
+ sirf,function = "pwm3";
+ };
+ };
+ gps_pins_a: gps_0 {
+ gps {
+ sirf,pins = "gpsgrp";
+ sirf,function = "gps";
+ };
+ };
+ vip_pins_a: vip_0 {
+ vip {
+ sirf,pins = "vipgrp";
+ sirf,function = "vip";
+ };
+ };
+ sdmmc0_pins_a: sdmmc0_0 {
+ sdmmc0 {
+ sirf,pins = "sdmmc0grp";
+ sirf,function = "sdmmc0";
+ };
+ };
+ sdmmc1_pins_a: sdmmc1_0 {
+ sdmmc1 {
+ sirf,pins = "sdmmc1grp";
+ sirf,function = "sdmmc1";
+ };
+ };
+ sdmmc2_pins_a: sdmmc2_0 {
+ sdmmc2 {
+ sirf,pins = "sdmmc2grp";
+ sirf,function = "sdmmc2";
+ };
+ };
+ sdmmc3_pins_a: sdmmc3_0 {
+ sdmmc3 {
+ sirf,pins = "sdmmc3grp";
+ sirf,function = "sdmmc3";
+ };
+ };
+ sdmmc4_pins_a: sdmmc4_0 {
+ sdmmc4 {
+ sirf,pins = "sdmmc4grp";
+ sirf,function = "sdmmc4";
+ };
+ };
+ sdmmc5_pins_a: sdmmc5_0 {
+ sdmmc5 {
+ sirf,pins = "sdmmc5grp";
+ sirf,function = "sdmmc5";
+ };
+ };
+ i2s_pins_a: i2s_0 {
+ i2s {
+ sirf,pins = "i2sgrp";
+ sirf,function = "i2s";
+ };
+ };
+ ac97_pins_a: ac97_0 {
+ ac97 {
+ sirf,pins = "ac97grp";
+ sirf,function = "ac97";
+ };
+ };
+ nand_pins_a: nand_0 {
+ nand {
+ sirf,pins = "nandgrp";
+ sirf,function = "nand";
+ };
+ };
+ usp0_pins_a: usp0_0 {
+ usp0 {
+ sirf,pins = "usp0grp";
+ sirf,function = "usp0";
+ };
+ };
+ usp1_pins_a: usp1_0 {
+ usp1 {
+ sirf,pins = "usp1grp";
+ sirf,function = "usp1";
+ };
+ };
+ usp2_pins_a: usp2_0 {
+ usp2 {
+ sirf,pins = "usp2grp";
+ sirf,function = "usp2";
+ };
+ };
+ usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
+ usb0_utmi_drvbus {
+ sirf,pins = "usb0_utmi_drvbusgrp";
+ sirf,function = "usb0_utmi_drvbus";
+ };
+ };
+ usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
+ usb1_utmi_drvbus {
+ sirf,pins = "usb1_utmi_drvbusgrp";
+ sirf,function = "usb1_utmi_drvbus";
+ };
+ };
+ warm_rst_pins_a: warm_rst_0 {
+ warm_rst {
+ sirf,pins = "warm_rstgrp";
+ sirf,function = "warm_rst";
+ };
+ };
+ pulse_count_pins_a: pulse_count_0 {
+ pulse_count {
+ sirf,pins = "pulse_countgrp";
+ sirf,function = "pulse_count";
+ };
+ };
+ cko0_rst_pins_a: cko0_rst_0 {
+ cko0_rst {
+ sirf,pins = "cko0_rstgrp";
+ sirf,function = "cko0_rst";
+ };
+ };
+ cko1_rst_pins_a: cko1_rst_0 {
+ cko1_rst {
+ sirf,pins = "cko1_rstgrp";
+ sirf,function = "cko1_rst";
+ };
+ };
+ };
+
+ pwm@cc130000 {
+ compatible = "sirf,marco-pwm";
+ reg = <0xcc130000 0x10000>;
+ };
+
+ efusesys@cc140000 {
+ compatible = "sirf,marco-efuse";
+ reg = <0xcc140000 0x10000>;
+ };
+
+ pulsec@cc150000 {
+ compatible = "sirf,marco-pulsec";
+ reg = <0xcc150000 0x10000>;
+ interrupts = <0 48 0>;
+ };
+
+ pci-iobg {
+ compatible = "sirf,marco-pciiobg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xcd000000 0xcd000000 0x1000000>;
+
+ sd0: sdhci@cd000000 {
+ cell-index = <0>;
+ compatible = "sirf,marco-sdhc";
+ reg = <0xcd000000 0x100000>;
+ interrupts = <0 38 0>;
+ status = "disabled";
+ };
+
+ sd1: sdhci@cd100000 {
+ cell-index = <1>;
+ compatible = "sirf,marco-sdhc";
+ reg = <0xcd100000 0x100000>;
+ interrupts = <0 38 0>;
+ status = "disabled";
+ };
+
+ sd2: sdhci@cd200000 {
+ cell-index = <2>;
+ compatible = "sirf,marco-sdhc";
+ reg = <0xcd200000 0x100000>;
+ interrupts = <0 23 0>;
+ status = "disabled";
+ };
+
+ sd3: sdhci@cd300000 {
+ cell-index = <3>;
+ compatible = "sirf,marco-sdhc";
+ reg = <0xcd300000 0x100000>;
+ interrupts = <0 23 0>;
+ status = "disabled";
+ };
+
+ sd4: sdhci@cd400000 {
+ cell-index = <4>;
+ compatible = "sirf,marco-sdhc";
+ reg = <0xcd400000 0x100000>;
+ interrupts = <0 39 0>;
+ status = "disabled";
+ };
+
+ sd5: sdhci@cd500000 {
+ cell-index = <5>;
+ compatible = "sirf,marco-sdhc";
+ reg = <0xcd500000 0x100000>;
+ interrupts = <0 39 0>;
+ status = "disabled";
+ };
+
+ pci-copy@cd900000 {
+ compatible = "sirf,marco-pcicp";
+ reg = <0xcd900000 0x100000>;
+ interrupts = <0 40 0>;
+ };
+
+ rom-interface@cda00000 {
+ compatible = "sirf,marco-romif";
+ reg = <0xcda00000 0x100000>;
+ };
+ };
+ };
+
+ rtc-iobg {
+ compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xc1000000 0x10000>;
+
+ gpsrtc@1000 {
+ compatible = "sirf,marco-gpsrtc";
+ reg = <0x1000 0x1000>;
+ interrupts = <0 55 0>,
+ <0 56 0>,
+ <0 57 0>;
+ };
+
+ sysrtc@2000 {
+ compatible = "sirf,marco-sysrtc";
+ reg = <0x2000 0x1000>;
+ interrupts = <0 52 0>,
+ <0 53 0>,
+ <0 54 0>;
+ };
+
+ pwrc@3000 {
+ compatible = "sirf,marco-pwrc";
+ reg = <0x3000 0x1000>;
+ interrupts = <0 32 0>;
+ };
+ };
+
+ uus-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xce000000 0xce000000 0x1000000>;
+
+ usb0: usb@ce000000 {
+ compatible = "chipidea,ci13611a-marco";
+ reg = <0xce000000 0x10000>;
+ interrupts = <0 10 0>;
+ };
+
+ usb1: usb@ce010000 {
+ compatible = "chipidea,ci13611a-marco";
+ reg = <0xce010000 0x10000>;
+ interrupts = <0 11 0>;
+ };
+
+ security@ce020000 {
+ compatible = "sirf,marco-security";
+ reg = <0xce020000 0x10000>;
+ interrupts = <0 42 0>;
+ };
+ };
+
+ can-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xd0000000 0xd0000000 0x1000000>;
+
+ can0: can@d0000000 {
+ compatible = "sirf,marco-can";
+ reg = <0xd0000000 0x10000>;
+ };
+
+ can1: can@d0010000 {
+ compatible = "sirf,marco-can";
+ reg = <0xd0010000 0x10000>;
+ };
+ };
+
+ lvds-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xd1000000 0xd1000000 0x1000000>;
+
+ lvds@d1000000 {
+ compatible = "sirf,marco-lvds";
+ reg = <0xd1000000 0x10000>;
+ interrupts = <0 64 0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
index 6a936c7c078a..002a1ceadceb 100644
--- a/arch/arm/configs/prima2_defconfig
+++ b/arch/arm/configs/prima2_defconfig
@@ -11,6 +11,9 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_ARCH_SIRF=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_KEXEC=y
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 558ccfb8d458..4f7379fe01e2 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -11,6 +11,16 @@ config ARCH_PRIMA2
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
+config ARCH_MARCO
+ bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
+ default y
+ select ARM_GIC
+ select CPU_V7
+ select HAVE_SMP
+ select SMP_ON_UP
+ help
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
+
endmenu
config SIRF_IRQ
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index fc9ce22e2b5a..bfe360cbd177 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -1,4 +1,3 @@
-obj-y := timer.o
obj-y += rstc.o
obj-y += common.o
obj-y += rtciobrg.o
@@ -6,3 +5,7 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_SIRF_IRQ) += irq.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
+obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index ed3570e5eb8f..00a65649a7e2 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -8,9 +8,11 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/of_irq.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include "common.h"
@@ -30,6 +32,12 @@ void __init sirfsoc_init_late(void)
sirfsoc_pm_init();
}
+static __init void sirfsoc_map_io(void)
+{
+ sirfsoc_map_lluart();
+ sirfsoc_map_scu();
+}
+
#ifdef CONFIG_ARCH_PRIMA2
static const char *prima2_dt_match[] __initdata = {
"sirf,prima2",
@@ -38,9 +46,12 @@ static const char *prima2_dt_match[] __initdata = {
DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
- .map_io = sirfsoc_map_lluart,
+ .map_io = sirfsoc_map_io,
.init_irq = sirfsoc_of_irq_init,
- .init_time = sirfsoc_timer_init,
+ .init_time = sirfsoc_prima2_timer_init,
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ .handle_irq = sirfsoc_handle_irq,
+#endif
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
@@ -48,3 +59,33 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
.restart = sirfsoc_restart,
MACHINE_END
#endif
+
+#ifdef CONFIG_ARCH_MARCO
+static const struct of_device_id marco_irq_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { /* sentinel */ }
+};
+
+static void __init marco_init_irq(void)
+{
+ of_irq_init(marco_irq_match);
+}
+
+static const char *marco_dt_match[] __initdata = {
+ "sirf,marco",
+ NULL
+};
+
+DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
+ /* Maintainer: Barry Song <baohua.song@csr.com> */
+ .smp = smp_ops(sirfsoc_smp_ops),
+ .map_io = sirfsoc_map_io,
+ .init_irq = marco_init_irq,
+ .init_time = sirfsoc_marco_timer_init,
+ .handle_irq = gic_handle_irq,
+ .init_machine = sirfsoc_mach_init,
+ .init_late = sirfsoc_init_late,
+ .dt_compat = marco_dt_match,
+ .restart = sirfsoc_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 9c75f124e3cf..b7c26b62e4a7 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -11,12 +11,19 @@
#include <linux/init.h>
#include <asm/mach/time.h>
+#include <asm/exception.h>
-extern void sirfsoc_timer_init(void);
+extern void sirfsoc_prima2_timer_init(void);
+extern void sirfsoc_marco_timer_init(void);
+
+extern struct smp_operations sirfsoc_smp_ops;
+extern void sirfsoc_secondary_startup(void);
+extern void sirfsoc_cpu_die(unsigned int cpu);
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
extern void sirfsoc_restart(char, const char *);
+extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
#ifndef CONFIG_DEBUG_LL
static inline void sirfsoc_map_lluart(void) {}
@@ -24,6 +31,12 @@ static inline void sirfsoc_map_lluart(void) {}
extern void __init sirfsoc_map_lluart(void);
#endif
+#ifndef CONFIG_SMP
+static inline void sirfsoc_map_scu(void) {}
+#else
+extern void sirfsoc_map_scu(void);
+#endif
+
#ifdef CONFIG_SUSPEND
extern int sirfsoc_pm_init(void);
#else
diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S
new file mode 100644
index 000000000000..6ec19d51a271
--- /dev/null
+++ b/arch/arm/mach-prima2/headsmp.S
@@ -0,0 +1,79 @@
+/*
+ * Entry of the second core for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+/*
+ * Cold boot and hardware reset show different behaviour,
+ * system will be always panic if we warm-reset the board
+ * Here we invalidate L1 of CPU1 to make sure there isn't
+ * uninitialized data written into memory later
+ */
+ENTRY(v7_invalidate_l1)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 2, r0, c0, c0, 0
+ mrc p15, 1, r0, c0, c0, 0
+
+ ldr r1, =0x7fff
+ and r2, r1, r0, lsr #13
+
+ ldr r1, =0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r5, c7, c6, 2
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb
+ isb
+ mov pc, lr
+ENDPROC(v7_invalidate_l1)
+
+/*
+ * SIRFSOC specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(sirfsoc_secondary_startup)
+ bl v7_invalidate_l1
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+ENDPROC(sirfsoc_secondary_startup)
+
+ .align
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c
new file mode 100644
index 000000000000..97c1ee586442
--- /dev/null
+++ b/arch/arm/mach-prima2/hotplug.c
@@ -0,0 +1,41 @@
+/*
+ * CPU hotplug support for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+ flush_cache_all();
+
+ /* we put the platform to just WFI */
+ for (;;) {
+ __asm__ __volatile__("dsb\n\t" "wfi\n\t"
+ : : : "memory");
+ if (pen_release == cpu_logical_map(cpu)) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+ }
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void sirfsoc_cpu_die(unsigned int cpu)
+{
+ platform_do_lowpower(cpu);
+}
diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h
index f6014a07541f..b778a0f248ed 100644
--- a/arch/arm/mach-prima2/include/mach/irqs.h
+++ b/arch/arm/mach-prima2/include/mach/irqs.h
@@ -10,8 +10,8 @@
#define __ASM_ARCH_IRQS_H
#define SIRFSOC_INTENAL_IRQ_START 0
-#define SIRFSOC_INTENAL_IRQ_END 59
+#define SIRFSOC_INTENAL_IRQ_END 127
#define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1)
-#define NR_IRQS 220
+#define NR_IRQS 288
#endif
diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h
index c98b4d5ac24a..c10510d01a44 100644
--- a/arch/arm/mach-prima2/include/mach/uart.h
+++ b/arch/arm/mach-prima2/include/mach/uart.h
@@ -10,7 +10,13 @@
#define __MACH_PRIMA2_SIRFSOC_UART_H
/* UART-1: used as serial debug port */
+#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
#define SIRFSOC_UART1_PA_BASE 0xb0060000
+#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1)
+#define SIRFSOC_UART1_PA_BASE 0xcc060000
+#else
+#define SIRFSOC_UART1_PA_BASE 0
+#endif
#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000)
#define SIRFSOC_UART1_SIZE SZ_4K
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 0c898fcf909c..15f3edcfbb47 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -25,6 +25,9 @@ static __inline__ void putc(char c)
* during kernel decompression, all mappings are flat:
* virt_addr == phys_addr
*/
+ if (!SIRFSOC_UART1_PA_BASE)
+ return;
+
while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
& SIRFSOC_UART1_TXFIFO_FULL)
barrier();
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index 7dee9176e77a..6c0f3e9c43fb 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -9,17 +9,19 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/irqdomain.h>
#include <linux/syscore_ops.h>
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+#include <mach/hardware.h>
#define SIRFSOC_INT_RISC_MASK0 0x0018
#define SIRFSOC_INT_RISC_MASK1 0x001C
#define SIRFSOC_INT_RISC_LEVEL0 0x0020
#define SIRFSOC_INT_RISC_LEVEL1 0x0024
+#define SIRFSOC_INIT_IRQ_ID 0x0038
void __iomem *sirfsoc_intc_base;
@@ -52,6 +54,16 @@ static __init void sirfsoc_irq_init(void)
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
}
+asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat, irqnr;
+
+ irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID);
+ irqnr = irqstat & 0xff;
+
+ handle_IRQ(irqnr, regs);
+}
+
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
{},
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index c99837797d76..cbcbe9cb094c 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -11,19 +11,38 @@
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
-static struct of_device_id prima2_l2x0_ids[] = {
- { .compatible = "sirf,prima2-pl310-cache" },
+struct l2x0_aux
+{
+ u32 val;
+ u32 mask;
+};
+
+static struct l2x0_aux prima2_l2x0_aux __initconst = {
+ .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
+ .mask = 0,
+};
+
+static struct l2x0_aux marco_l2x0_aux __initconst = {
+ .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
+ (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
+ .mask = L2X0_AUX_CTRL_MASK,
+};
+
+static struct of_device_id sirf_l2x0_ids[] __initconst = {
+ { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, },
+ { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, },
{},
};
static int __init sirfsoc_l2x0_init(void)
{
struct device_node *np;
+ const struct l2x0_aux *aux;
- np = of_find_matching_node(NULL, prima2_l2x0_ids);
+ np = of_find_matching_node(NULL, sirf_l2x0_ids);
if (np) {
- pr_info("Initializing prima2 L2 cache\n");
- return l2x0_of_init(0x40000, 0);
+ aux = of_match_node(sirf_l2x0_ids, np)->data;
+ return l2x0_of_init(aux->val, aux->mask);
}
return 0;
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
new file mode 100644
index 000000000000..2395022bc733
--- /dev/null
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -0,0 +1,163 @@
+/*
+ * plat smp support for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#include "common.h"
+
+static void __iomem *scu_base;
+static void __iomem *rsc_base;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static struct map_desc scu_io_desc __initdata = {
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init sirfsoc_map_scu(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.virtual = SIRFSOC_VA(base);
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+
+ scu_base = (void __iomem *)SIRFSOC_VA(base);
+}
+
+static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+ smp_wmb();
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static struct of_device_id rsc_ids[] = {
+ { .compatible = "sirf,marco-rsc" },
+ {},
+};
+
+static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, rsc_ids);
+ if (!np)
+ return -ENODEV;
+
+ rsc_base = of_iomap(np, 0);
+ if (!rsc_base)
+ return -ENOMEM;
+
+ /*
+ * write the address of secondary startup into the sram register
+ * at offset 0x2C, then write the magic number 0x3CAF5D62 to the
+ * RSC register at offset 0x28, which is what boot rom code is
+ * waiting for. This would wake up the secondary core from WFE
+ */
+#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C
+ __raw_writel(virt_to_phys(sirfsoc_secondary_startup),
+ rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
+
+#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28
+ __raw_writel(0x3CAF5D62,
+ rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
+
+ /* make sure write buffer is drained */
+ mb();
+
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ pen_release = cpu_logical_map(cpu);
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+ /*
+ * Send the secondary CPU SEV, thereby causing the boot monitor to read
+ * the JUMPADDR and WAKEMAGIC, and branch to the address found there.
+ */
+ dsb_sev();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init sirfsoc_smp_init_cpus(void)
+{
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
+{
+ scu_enable(scu_base);
+}
+
+struct smp_operations sirfsoc_smp_ops __initdata = {
+ .smp_init_cpus = sirfsoc_smp_init_cpus,
+ .smp_prepare_cpus = sirfsoc_smp_prepare_cpus,
+ .smp_secondary_init = sirfsoc_secondary_init,
+ .smp_boot_secondary = sirfsoc_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = sirfsoc_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 762adb73ab7c..435019ca0a48 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock);
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
+ { .compatible = "sirf,marco-rstc" },
{},
};
@@ -42,27 +43,37 @@ early_initcall(sirfsoc_of_rstc_init);
int sirfsoc_reset_device(struct device *dev)
{
- const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
- unsigned int reset_bit;
+ u32 reset_bit;
- if (!prop)
- return -ENODEV;
-
- reset_bit = be32_to_cpup(prop);
+ if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit))
+ return -EINVAL;
mutex_lock(&rstc_lock);
- /*
- * Writing 1 to this bit resets corresponding block. Writing 0 to this
- * bit de-asserts reset signal of the corresponding block.
- * datasheet doesn't require explicit delay between the set and clear
- * of reset bit. it could be shorter if tests pass.
- */
- writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
- sirfsoc_rstc_base + (reset_bit / 32) * 4);
- msleep(10);
- writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
- sirfsoc_rstc_base + (reset_bit / 32) * 4);
+ if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) {
+ /*
+ * Writing 1 to this bit resets corresponding block. Writing 0 to this
+ * bit de-asserts reset signal of the corresponding block.
+ * datasheet doesn't require explicit delay between the set and clear
+ * of reset bit. it could be shorter if tests pass.
+ */
+ writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
+ sirfsoc_rstc_base + (reset_bit / 32) * 4);
+ msleep(10);
+ writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
+ sirfsoc_rstc_base + (reset_bit / 32) * 4);
+ } else {
+ /*
+ * For MARCO and POLO
+ * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR
+ * register de-asserts reset signal of the corresponding block.
+ * datasheet doesn't require explicit delay between the set and clear
+ * of reset bit. it could be shorter if tests pass.
+ */
+ writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
+ msleep(10);
+ writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
+ }
mutex_unlock(&rstc_lock);
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
index 557353602130..9f2da2eec4dc 100644
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -104,6 +104,7 @@ EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
static const struct of_device_id rtciobrg_ids[] = {
{ .compatible = "sirf,prima2-rtciobg" },
+ { .compatible = "sirf,marco-rtciobg" },
{}
};
diff --git a/arch/arm/mach-prima2/timer-marco.c b/arch/arm/mach-prima2/timer-marco.c
new file mode 100644
index 000000000000..f4eea2e97eb0
--- /dev/null
+++ b/arch/arm/mach-prima2/timer-marco.c
@@ -0,0 +1,316 @@
+/*
+ * System timer for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <asm/sched_clock.h>
+#include <asm/localtimer.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+
+#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000
+#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004
+#define SIRFSOC_TIMER_MATCH_0 0x0018
+#define SIRFSOC_TIMER_MATCH_1 0x001c
+#define SIRFSOC_TIMER_COUNTER_0 0x0048
+#define SIRFSOC_TIMER_COUNTER_1 0x004c
+#define SIRFSOC_TIMER_INTR_STATUS 0x0060
+#define SIRFSOC_TIMER_WATCHDOG_EN 0x0064
+#define SIRFSOC_TIMER_64COUNTER_CTRL 0x0068
+#define SIRFSOC_TIMER_64COUNTER_LO 0x006c
+#define SIRFSOC_TIMER_64COUNTER_HI 0x0070
+#define SIRFSOC_TIMER_64COUNTER_LOAD_LO 0x0074
+#define SIRFSOC_TIMER_64COUNTER_LOAD_HI 0x0078
+#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO 0x007c
+#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI 0x0080
+
+#define SIRFSOC_TIMER_REG_CNT 6
+
+static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
+ SIRFSOC_TIMER_WATCHDOG_EN,
+ SIRFSOC_TIMER_32COUNTER_0_CTRL,
+ SIRFSOC_TIMER_32COUNTER_1_CTRL,
+ SIRFSOC_TIMER_64COUNTER_CTRL,
+ SIRFSOC_TIMER_64COUNTER_RLATCHED_LO,
+ SIRFSOC_TIMER_64COUNTER_RLATCHED_HI,
+};
+
+static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
+
+static void __iomem *sirfsoc_timer_base;
+static void __init sirfsoc_of_timer_map(void);
+
+/* disable count and interrupt */
+static inline void sirfsoc_timer_count_disable(int idx)
+{
+ writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7,
+ sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
+}
+
+/* enable count and interrupt */
+static inline void sirfsoc_timer_count_enable(int idx)
+{
+ writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7,
+ sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
+}
+
+/* timer interrupt handler */
+static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+ int cpu = smp_processor_id();
+
+ /* clear timer interrupt */
+ writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
+
+ if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+ sirfsoc_timer_count_disable(cpu);
+
+ ce->event_handler(ce);
+
+ return IRQ_HANDLED;
+}
+
+/* read 64-bit timer counter */
+static cycle_t sirfsoc_timer_read(struct clocksource *cs)
+{
+ u64 cycles;
+
+ writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
+ BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+
+ cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI);
+ cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO);
+
+ return cycles;
+}
+
+static int sirfsoc_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ int cpu = smp_processor_id();
+
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 +
+ 4 * cpu);
+ writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 +
+ 4 * cpu);
+
+ /* enable the tick */
+ sirfsoc_timer_count_enable(cpu);
+
+ return 0;
+}
+
+static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *ce)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* enable in set_next_event */
+ break;
+ default:
+ break;
+ }
+
+ sirfsoc_timer_count_disable(smp_processor_id());
+}
+
+static void sirfsoc_clocksource_suspend(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+ sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+}
+
+static void sirfsoc_clocksource_resume(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++)
+ writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+
+ writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2],
+ sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
+ writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1],
+ sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
+
+ writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
+ BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+}
+
+static struct clock_event_device sirfsoc_clockevent = {
+ .name = "sirfsoc_clockevent",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = sirfsoc_timer_set_mode,
+ .set_next_event = sirfsoc_timer_set_next_event,
+};
+
+static struct clocksource sirfsoc_clocksource = {
+ .name = "sirfsoc_clocksource",
+ .rating = 200,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = sirfsoc_timer_read,
+ .suspend = sirfsoc_clocksource_suspend,
+ .resume = sirfsoc_clocksource_resume,
+};
+
+static struct irqaction sirfsoc_timer_irq = {
+ .name = "sirfsoc_timer0",
+ .flags = IRQF_TIMER | IRQF_NOBALANCING,
+ .handler = sirfsoc_timer_interrupt,
+ .dev_id = &sirfsoc_clockevent,
+};
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+static struct irqaction sirfsoc_timer1_irq = {
+ .name = "sirfsoc_timer1",
+ .flags = IRQF_TIMER | IRQF_NOBALANCING,
+ .handler = sirfsoc_timer_interrupt,
+};
+
+static int __cpuinit sirfsoc_local_timer_setup(struct clock_event_device *ce)
+{
+ /* Use existing clock_event for cpu 0 */
+ if (!smp_processor_id())
+ return 0;
+
+ ce->irq = sirfsoc_timer1_irq.irq;
+ ce->name = "local_timer";
+ ce->features = sirfsoc_clockevent.features;
+ ce->rating = sirfsoc_clockevent.rating;
+ ce->set_mode = sirfsoc_timer_set_mode;
+ ce->set_next_event = sirfsoc_timer_set_next_event;
+ ce->shift = sirfsoc_clockevent.shift;
+ ce->mult = sirfsoc_clockevent.mult;
+ ce->max_delta_ns = sirfsoc_clockevent.max_delta_ns;
+ ce->min_delta_ns = sirfsoc_clockevent.min_delta_ns;
+
+ sirfsoc_timer1_irq.dev_id = ce;
+ BUG_ON(setup_irq(ce->irq, &sirfsoc_timer1_irq));
+ irq_set_affinity(sirfsoc_timer1_irq.irq, cpumask_of(1));
+
+ clockevents_register_device(ce);
+ return 0;
+}
+
+static void sirfsoc_local_timer_stop(struct clock_event_device *ce)
+{
+ sirfsoc_timer_count_disable(1);
+
+ remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
+}
+
+static struct local_timer_ops sirfsoc_local_timer_ops __cpuinitdata = {
+ .setup = sirfsoc_local_timer_setup,
+ .stop = sirfsoc_local_timer_stop,
+};
+#endif /* CONFIG_LOCAL_TIMERS */
+
+static void __init sirfsoc_clockevent_init(void)
+{
+ clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
+
+ sirfsoc_clockevent.max_delta_ns =
+ clockevent_delta2ns(-2, &sirfsoc_clockevent);
+ sirfsoc_clockevent.min_delta_ns =
+ clockevent_delta2ns(2, &sirfsoc_clockevent);
+
+ sirfsoc_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&sirfsoc_clockevent);
+#ifdef CONFIG_LOCAL_TIMERS
+ local_timer_register(&sirfsoc_local_timer_ops);
+#endif
+}
+
+/* initialize the kernel jiffy timer source */
+void __init sirfsoc_marco_timer_init(void)
+{
+ unsigned long rate;
+ u32 timer_div;
+ struct clk *clk;
+
+ /* initialize clocking early, we want to set the OS timer */
+ sirfsoc_of_clk_init();
+
+ /* timer's input clock is io clock */
+ clk = clk_get_sys("io", NULL);
+
+ BUG_ON(IS_ERR(clk));
+ rate = clk_get_rate(clk);
+
+ BUG_ON(rate < CLOCK_TICK_RATE);
+ BUG_ON(rate % CLOCK_TICK_RATE);
+
+ sirfsoc_of_timer_map();
+
+ /* Initialize the timer dividers */
+ timer_div = rate / CLOCK_TICK_RATE - 1;
+ writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+ writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
+ writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
+
+ /* Initialize timer counters to 0 */
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI);
+ writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) |
+ BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1);
+
+ /* Clear all interrupts */
+ writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
+
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+
+ BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
+
+ sirfsoc_clockevent_init();
+}
+
+static struct of_device_id timer_ids[] = {
+ { .compatible = "sirf,marco-tick" },
+ {},
+};
+
+static void __init sirfsoc_of_timer_map(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, timer_ids);
+ if (!np)
+ return;
+ sirfsoc_timer_base = of_iomap(np, 0);
+ if (!sirfsoc_timer_base)
+ panic("unable to map timer cpu registers\n");
+
+ sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
+ if (!sirfsoc_timer_irq.irq)
+ panic("No irq passed for timer0 via DT\n");
+
+#ifdef CONFIG_LOCAL_TIMERS
+ sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
+ if (!sirfsoc_timer1_irq.irq)
+ panic("No irq passed for timer1 via DT\n");
+#endif
+
+ of_node_put(np);
+}
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer-prima2.c
index a7a2c199c3ea..6da584f8a949 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer-prima2.c
@@ -181,7 +181,7 @@ static void __init sirfsoc_clockevent_init(void)
}
/* initialize the kernel jiffy timer source */
-void __init sirfsoc_timer_init(void)
+void __init sirfsoc_prima2_timer_init(void)
{
unsigned long rate;
struct clk *clk;
@@ -220,14 +220,14 @@ static struct of_device_id timer_ids[] = {
{},
};
-void __init sirfsoc_of_timer_map(void)
+static void __init sirfsoc_of_timer_map(void)
{
struct device_node *np;
const unsigned int *intspec;
np = of_find_matching_node(NULL, timer_ids);
if (!np)
- panic("unable to find compatible timer node in dtb\n");
+ return;
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
panic("unable to map timer cpu registers\n");