diff options
Diffstat (limited to 'arch')
246 files changed, 2572 insertions, 2110 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 79bea0b34d1f..83912d0251ca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -309,9 +309,11 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR select COMMON_CLK + select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -425,9 +427,6 @@ config ARCH_EFM32 select ARCH_REQUIRE_GPIOLIB select AUTO_ZRELADDR select ARM_NVIC - # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged, - # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO - select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK select CPU_V7M @@ -659,9 +658,8 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM_NODT - bool "Qualcomm MSM" - select ARCH_MSM +config ARCH_MSM + bool "Qualcomm MSM (non-multiplatform)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -921,16 +919,18 @@ config ARCH_MULTI_V4_V5 config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 - select CPU_V6 + select CPU_V6K config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select CPU_V7 + select HAVE_SMP config ARCH_MULTI_V6_V7 bool + select MIGHT_HAVE_CACHE_L2X0 config ARCH_MULTI_CPU_AUTO def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) @@ -938,6 +938,13 @@ config ARCH_MULTI_CPU_AUTO endmenu +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the @@ -949,8 +956,6 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm/Kconfig" -source "arch/arm/mach-bcm2835/Kconfig" - source "arch/arm/mach-berlin/Kconfig" source "arch/arm/mach-clps711x/Kconfig" @@ -1018,6 +1023,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-mmp/Kconfig" +source "arch/arm/mach-qcom/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" @@ -1061,8 +1068,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-virt/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0531da8e5216..76ee27829c34 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -956,7 +956,7 @@ config DEBUG_STI_UART config DEBUG_MSM_UART bool - depends on ARCH_MSM + depends on ARCH_MSM || ARCH_QCOM config DEBUG_LL_INCLUDE string @@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM + depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM + default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ + ARCH_EXYNOS || ARCH_EFM32 default "mach/uncompress.h" config EARLY_PRINTK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fddf4beaee45..41c1931f0155 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -143,7 +143,6 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_BCM) += bcm -machine-$(CONFIG_ARCH_BCM2835) += bcm2835 machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx @@ -180,6 +179,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa +machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc @@ -199,7 +199,6 @@ machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress -machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_ARCH_ZYNQ) += zynq diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d3cb0126a102..ec4dd7c3ed37 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9261 +dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb # sam9263 dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb @@ -29,6 +31,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb # sam9n12 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9rl +dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb # sam9x5 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb @@ -119,9 +123,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb -dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ @@ -234,6 +235,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi new file mode 100644 index 000000000000..e21dda0e8986 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -0,0 +1,735 @@ +/* + * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC + * + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> + * + * Licensed under GPLv2 only. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/at91.h> + +/ { + model = "Atmel AT91SAM9261 family SoC"; + compatible = "atmel,at91sam9261"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + tcb0 = &tcb0; + i2c0 = &i2c0; + ssc0 = &ssc0; + ssc1 = &ssc1; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + reg = <0x20000000 0x08000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x100000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + fb0: fb@0x00600000 { + compatible = "atmel,at91sam9261-lcdc"; + reg = <0x00600000 0x1000>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&hclk1>; + clock-names = "lcdc_clk", "hclk"; + status = "disabled"; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <22>; + atmel,nand-cmd-offset = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + gpios = <&pioC 15 GPIO_ACTIVE_HIGH>, + <&pioC 14 GPIO_ACTIVE_HIGH>, + <0>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, + <18 IRQ_TYPE_LEVEL_HIGH 0>, + <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; + }; + + usb1: gadget@fffa4000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffa4000 0x4000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&udc_clk>, <&udpck>; + clock-names = "usb_clk", "udc_clk", "udpck"; + status = "disabled"; + }; + + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + status = "disabled"; + }; + + i2c0: i2c@fffac000 { + compatible = "atmel,at91sam9261-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_twi>; + reg = <0xfffac000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + usart0: serial@fffb0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb0000 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@fffb4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb4000 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@fffb8000{ + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb8000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + ssc0: ssc@fffbc000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffbc000 0x4000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + + ssc1: ssc@fffc0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc0000 0x4000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disabled"; + }; + + spi0: spi@fffc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffc8000 0x200>; + cs-gpios = <0>, <0>, <0>, <0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi1: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + ramc: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + matrix: matrix@ffffee00 { + compatible = "atmel,at91sam9260-bus-matrix"; + reg = <0xffffee00 0x200>; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = + /* A B */ + <0xffffffff 0xfffffff7>, /* pioA */ + <0xffffffff 0xfffffff4>, /* pioB */ + <0xffffffff 0xffffff07>; /* pioC */ + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + i2c0 { + pinctrl_i2c_bitbang: i2c-0-bitbang { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>, + <AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_i2c_twi: i2c-0-twi { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 94000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2 4 3>; + clocks = <&pllb>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + hclk0: hclk0 { + #clock-cells = <0>; + reg = <16>; + clocks = <&mck>; + }; + + hclk1: hclk1 { + #clock-cells = <0>; + reg = <17>; + clocks = <&mck>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <9>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi0_clk: twi0_clk { + reg = <11>; + #clock-cells = <0>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <19>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <20>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <21>; + }; + }; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_bitbang>; + gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */ + <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts new file mode 100644 index 000000000000..2ce527e70c7a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -0,0 +1,211 @@ +/* + * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board + * + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> + * + * Licensed under GPLv2 only. + */ +/dts-v1/; +#include "at91sam9261.dtsi" + +/ { + model = "Atmel at91sam9261ek"; + compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + usb0: ohci@00500000 { + status = "okay"; + }; + + fb0: fb@0x00600000 { + display = <&display0>; + atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + atmel,lcd-wiring-mode = "BRG"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + spi0: spi@fffc8000 { + cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>; + status = "okay"; + + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <0>; + spi-max-frequency = <15000000>; + }; + + tsc2046@0 { + reg = <2>; + compatible = "ti,ads7843"; + interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; + spi-max-frequency = <3000000>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + + ti,x-min = /bits/ 16 <150>; + ti,x-max = /bits/ 16 <3830>; + ti,y-min = /bits/ 16 <190>; + ti,y-max = /bits/ 16 <3830>; + ti,vref-delay-usecs = /bits/ 16 <450>; + ti,x-plate-ohms = /bits/ 16 <450>; + ti,y-plate-ohms = /bits/ 16 <250>; + ti,pressure-max = /bits/ 16 <15000>; + ti,debounce-rep = /bits/ 16 <0>; + ti,debounce-tol = /bits/ 16 <65535>; + ti,debounce-max = /bits/ 16 <1>; + + linux,wakeup; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + }; + }; + + leds { + compatible = "gpio-leds"; + + ds8 { + label = "ds8"; + gpios = <&pioA 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + ds7 { + label = "ds7"; + gpios = <&pioA 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "nand-disk"; + }; + + ds1 { + label = "ds1"; + gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button_0 { + label = "button_0"; + gpios = <&pioA 27 GPIO_ACTIVE_LOW>; + linux,code = <256>; + gpio-key,wakeup; + }; + + button_1 { + label = "button_1"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + linux,code = <257>; + gpio-key,wakeup; + }; + + button_2 { + label = "button_2"; + gpios = <&pioA 25 GPIO_ACTIVE_LOW>; + linux,code = <258>; + gpio-key,wakeup; + }; + + button_3 { + label = "button_3"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + linux,code = <259>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi new file mode 100644 index 000000000000..63e1784d272c --- /dev/null +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -0,0 +1,802 @@ +/* + * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC + * + * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * Licensed under GPLv2 or later. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/clk/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Atmel AT91SAM9RL family SoC"; + compatible = "atmel,at91sam9rl", "atmel,at91sam9"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + i2c0 = &i2c0; + i2c1 = &i2c1; + ssc0 = &ssc0; + ssc1 = &ssc1; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>, + <0xffffe800 0x200>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, + <&pioB 6 GPIO_ACTIVE_HIGH>, + <0>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, + <17 IRQ_TYPE_LEVEL_HIGH 0>, + <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; + }; + + mmc0: mmc@fffa4000 { + compatible = "atmel,hsmci"; + reg = <0xfffa4000 0x600>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; + status = "disabled"; + }; + + i2c0: i2c@fffa8000 { + compatible = "atmel,at91sam9260-i2c"; + reg = <0xfffa8000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + i2c1: i2c@fffac000 { + compatible = "atmel,at91sam9260-i2c"; + reg = <0xfffac000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usart0: serial@fffb0000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb0000 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@fffb4000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb4000 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart2: serial@fffb8000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffb8000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart3: serial@fffbc000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffbc000 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + ssc0: ssc@fffc0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc0000 0x4000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + + ssc1: ssc@fffc4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc4000 0x4000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disabled"; + }; + + spi0: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffea00 0x200>; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = + /* A B */ + <0xffffffff 0xe05c6738>, /* pioA */ + <0xffffffff 0x0000c780>, /* pioB */ + <0xffffffff 0xe3ffff0e>, /* pioC */ + <0x003fffff 0x0001ff3c>; /* pioD */ + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>, + <AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + i2c_gpio1 { + pinctrl_i2c_gpio1: i2c_gpio1-0 { + atmel,pins = + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>, + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, + <AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand0_ale_cle: nand_ale_cle-0 { + atmel,pins = + <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_oe_we: nand_oe_we-0 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_cs: nand_cs-0 { + atmel,pins = + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioA_clk>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioB_clk>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioC_clk>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioD_clk>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g45-pmc"; + reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; + atmel,clk-output-range = <0 94000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <9>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <18>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <19>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <23>; + }; + }; + }; + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + }; + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + }; + + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ + <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; + status = "disabled"; + }; + + i2c@1 { + compatible = "i2c-gpio"; + gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ + <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio1>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts new file mode 100644 index 000000000000..cddb37825fad --- /dev/null +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -0,0 +1,157 @@ +/* + * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board + * + * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +#include "at91sam9rl.dtsi" + +/ { + model = "Atmel at91sam9rlek"; + compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt = <1>; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + apb { + mmc0: mmc@fffa4000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + }; + + ds2 { + label = "ds2"; + gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + }; + + ds3 { + label = "ds3"; + gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + right_click { + label = "right_click"; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; + linux,code = <273>; + gpio-key,wakeup; + }; + + left_click { + label = "left_click"; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; + linux,code = <272>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 0c81dc945aed..55d3f79c2ef5 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -65,9 +65,10 @@ #clock-cells = <1>; }; - reset-controller@88010000 { + rstc: reset-controller@88010000 { compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; + #reset-cells = <1>; }; rsc-controller@88020000 { diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi index 1579c3491ccd..0c9647d28765 100644 --- a/arch/arm/boot/dts/marco.dtsi +++ b/arch/arm/boot/dts/marco.dtsi @@ -58,9 +58,10 @@ #size-cells = <1>; ranges = <0xc2000000 0xc2000000 0x1000000>; - reset-controller@c2000000 { + rstc: reset-controller@c2000000 { compatible = "sirf,marco-rstc"; reg = <0xc2000000 0x10000>; + #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 8582ae41a583..20145526cd7b 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -76,9 +76,10 @@ #clock-cells = <1>; }; - reset-controller@88010000 { + rstc: reset-controller@88010000 { compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; + #reset-cells = <1>; }; rsc-controller@88020000 { diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 68a72f5507b9..169bad90dac9 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,63 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include "qcom-msm8660.dtsi" / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; - - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi new file mode 100644 index 000000000000..69d6c4edea30 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -0,0 +1,63 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/clock/qcom,gcc-msm8660.h> + +/ { + model = "Qualcomm MSM8660"; + compatible = "qcom,msm8660"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; + + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 7c30de4fa302..a58fb88315f6 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,70 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include "qcom-msm8960.dtsi" / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; - - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi new file mode 100644 index 000000000000..ff002826552a --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -0,0 +1,70 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/clock/qcom,gcc-msm8960.h> + +/ { + model = "Qualcomm MSM8960"; + compatible = "qcom,msm8960"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 0b4e9b5210d8..300ded9acbe9 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -16,10 +16,12 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9260=y +CONFIG_SOC_AT91SAM9261=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y CONFIG_SOC_AT91SAM9N12=y +CONFIG_SOC_AT91SAM9RL=y CONFIG_MACH_AT91RM9200_DT=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_TIMER_HZ=128 @@ -119,6 +121,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index 2cd832918e9c..c4c160fc8791 100644 --- a/arch/arm/configs/at91sam9260_9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -3,6 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -30,15 +31,12 @@ CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_SLOW_CLOCK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_AUTO_ZRELADDR=y -CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -57,15 +55,14 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -112,8 +109,6 @@ CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 7b6f131cecd6..85f846ae9ff2 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -1,8 +1,8 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_EMBEDDED=y CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -14,20 +14,23 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9RL=y CONFIG_MACH_AT91SAM9RLEK=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -66,6 +69,7 @@ CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index f43392dc2dcf..0302d293fba0 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -31,6 +31,7 @@ CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index 9e8c8316d6b0..0facf9da047c 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig @@ -15,7 +15,6 @@ CONFIG_ARCH_CDB89712=y CONFIG_ARCH_CLEP7312=y CONFIG_ARCH_EDB7211=y CONFIG_ARCH_P720T=y -CONFIG_ARCH_FORTUNET=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -27,7 +26,6 @@ CONFIG_INET=y # CONFIG_IPV6 is not set CONFIG_IRDA=y CONFIG_IRTTY_SIR=y -CONFIG_EP7211_DONGLE=y # CONFIG_WIRELESS is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -58,6 +56,7 @@ CONFIG_CS89x0_PLATFORM=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_SERIAL_CLPS711X=y CONFIG_SERIAL_CLPS711X_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 83f2aa83899c..f6fcc67ef06e 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,12 +12,6 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#ifdef CONFIG_ARCH_MULTIPLATFORM -#define CLOCK_TICK_RATE 1000000 -#else -#include <mach/timex.h> -#endif - typedef unsigned long cycles_t; #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S index f3a9cff6d5d4..8d8d922e5e44 100644 --- a/arch/arm/include/debug/samsung.S +++ b/arch/arm/include/debug/samsung.S @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> /* The S5PV210/S5PC110 implementations are as belows. */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 9968f208b7df..b2d2cf4dc052 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -131,7 +131,6 @@ config SOC_AT91SAM9261 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. @@ -149,7 +148,6 @@ config SOC_AT91SAM9RL select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_UTMI config SOC_AT91SAM9G45 diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index e47f5fd232f5..787bb50a4dff 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -21,6 +21,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_st.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "soc.h" diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3ebc9792560c..f3f19f21352a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -21,6 +21,7 @@ #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -922,6 +923,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -960,6 +962,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -987,9 +990,10 @@ static inline void configure_usart0_pins(unsigned pins) if (pins & ATMEL_UART_RTS) { /* * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). + * We need to drive the pin manually. The serial driver will driver + * this to high when initializing. */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + uart0_data.rts_gpio = AT91_PIN_PA21; } } @@ -1009,6 +1013,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1060,6 +1065,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1103,6 +1109,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index bc7b363a3083..7fd13aef9827 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -31,6 +31,7 @@ #include <asm/mach/time.h> #include <mach/at91_st.h> +#include <mach/hardware.h> static unsigned long last_crtr; static u32 irqmask; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 6c821e562159..c3d22be73b7c 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -21,6 +21,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1630ae64d3fb..8b1b0a870025 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -25,6 +25,7 @@ #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at91_adc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -819,6 +820,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -857,6 +859,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -908,6 +911,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -951,6 +955,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -994,6 +999,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1037,6 +1043,7 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1075,6 +1082,7 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 6276b4c1acfe..fb164a5d04a9 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -20,15 +20,18 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" + /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -189,6 +192,23 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + /* more lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0), + CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1), + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -247,7 +267,9 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck0); clk_register(&hck1); } - +#else +#define at91sam9261_register_clocks NULL +#endif /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b2a34740146a..80e35895d28f 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -25,6 +25,7 @@ #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -880,6 +881,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -918,6 +920,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -961,6 +964,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1004,6 +1008,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 37b90f4b990c..f30290572293 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -19,6 +19,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" @@ -223,6 +224,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 4aeadddbc181..43d53d6156dd 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -24,6 +24,7 @@ #include <mach/at91sam9263_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "board.h" #include "generic.h" @@ -1324,6 +1325,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1362,6 +1364,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1405,6 +1408,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1448,6 +1452,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 0f04ffe9c5a8..0a9e2fc8f796 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -19,6 +19,7 @@ #include <linux/of_irq.h> #include <asm/mach/time.h> +#include <mach/hardware.h> #define AT91_PIT_MR 0x00 /* Mode Register */ #define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2f455ce35268..5e6f498db0a8 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include <asm/system_misc.h> #include <mach/at91sam9g45.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "soc.h" @@ -284,6 +285,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioE", &pioDE_clk), /* Fake adc clock */ CLKDEV_CON_ID("adc_clk", &tsc_clk), + CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index cb36fa872d30..77b04c2edd78 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -32,6 +32,7 @@ #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> #include <mach/atmel-mci.h> +#include <mach/hardware.h> #include <media/atmel-isi.h> @@ -1587,6 +1588,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1625,6 +1627,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1668,6 +1671,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1711,6 +1715,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1754,6 +1759,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 4ef088c62eab..f2ea7b0a02da 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -182,6 +182,7 @@ static struct clk_lookup periph_clocks_lookups[] = { /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), + CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk), }; /* diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 3651517abedf..57f12d86c0e6 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -20,18 +20,20 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "at91_rstc.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* * The peripheral clocks. @@ -196,6 +198,24 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* more lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk), + CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -238,6 +258,7 @@ static void __init at91sam9rl_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#endif /* -------------------------------------------------------------------- * GPIO @@ -350,6 +371,8 @@ AT91_SOC_START(at91sam9rl) .default_irq_priority = at91sam9rl_default_irq_priority, .extern_irq = (1 << AT91SAM9RL_ID_IRQ0), .ioremap_registers = at91sam9rl_ioremap_registers, +#if defined(CONFIG_OLD_CLK_AT91) .register_clocks = at91sam9rl_register_clocks, +#endif .init = at91sam9rl_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index a698bdab2cce..428fc412aaf1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -21,6 +21,7 @@ #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> #include "board.h" @@ -956,6 +957,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -994,6 +996,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1045,6 +1048,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1088,6 +1092,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1131,6 +1136,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 3e8ec26e39dc..9ad781d5ee7c 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -253,6 +253,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), + CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk), }; /* diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bad94b84a46f..7523f1cdfe1d 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -19,7 +19,7 @@ #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> -#include <mach/timex.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index c0e637adf65d..07d0bf2ac2da 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -25,6 +25,7 @@ #include <linux/time.h> #include <linux/io.h> #include <mach/hardware.h> +#include <mach/at91x40.h> #include <asm/mach/time.h> #include "at91_tc.h" diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 3dab868b02fa..575b0be66ca8 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -13,6 +13,7 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/clk-provider.h> #include <asm/setup.h> #include <asm/irq.h> @@ -25,6 +26,14 @@ #include "generic.h" +static void __init sam9_dt_timer_init(void) +{ +#if defined(CONFIG_COMMON_CLK) + of_clk_init(NULL); +#endif + at91sam926x_pit_init(); +} + static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, @@ -43,7 +52,7 @@ static const char *at91_dt_board_compat[] __initdata = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = sam9_dt_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index c1d61d247790..416bae8435ee 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 65c0d6b5ecba..5f25fa54eb93 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 869cbecf00b7..e4a5ac17cdbc 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <mach/at91sam9_smc.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 90680217064e..38dca2bb027f 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -55,4 +55,6 @@ #define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ #define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ +#define AT91X40_MASTER_CLOCK 40000000 + #endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h deleted file mode 100644 index 5e917a66edd7..000000000000 --- a/arch/arm/mach-at91/include/mach/timex.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/timex.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_AT91X40 - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#else - -#define CLOCK_TICK_RATE 12345678 - -#endif - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 590b52dea9f7..8bda1cefdf96 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -27,6 +27,7 @@ #include <asm/mach/irq.h> #include <mach/cpu.h> +#include <mach/hardware.h> #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index b1aa6a9b3bd1..396d05c8b570 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC - select CPU_V7 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select GENERIC_TIME select GPIO_BCM_KONA - select SPARSE_IRQ select TICK_ONESHOT select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER @@ -32,6 +27,22 @@ config ARCH_BCM_MOBILE BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_ERRATA_411920 + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select CLKSRC_OF + select CPU_V6 + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_BCM2835 + help + This enables support for the Broadcom BCM2835 SoC. This SoC is + used in the Raspberry Pi and Roku 2 devices. + endmenu endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index c2ccd5a0f772..0ad293882079 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -11,5 +11,7 @@ # GNU General Public License for more details. obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o + plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index cb3dc364405c..6be54c10f8cb 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012-2013 Broadcom Corporation + * Copyright (C) 2012-2014 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -11,64 +11,65 @@ * GNU General Public License for more details. */ -#include <linux/of_platform.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> #include <linux/clocksource.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/hardware/cache-l2x0.h> -#include "bcm_kona_smc.h" #include "kona.h" -static int __init kona_l2_cache_init(void) +#define SECWDOG_OFFSET 0x00000000 +#define SECWDOG_RESERVED_MASK 0xe2000000 +#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000 +#define SECWDOG_EN_MASK 0x08000000 +#define SECWDOG_SRSTEN_MASK 0x04000000 +#define SECWDOG_CLKS_SHIFT 20 +#define SECWDOG_COUNT_SHIFT 0 + +static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) { - if (!IS_ENABLED(CONFIG_CACHE_L2X0)) - return 0; + uint32_t val; + void __iomem *base; + struct device_node *np_wdog; - if (bcm_kona_smc_init() < 0) { - pr_info("Kona secure API not available. Skipping L2 init\n"); - return 0; + np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt"); + if (!np_wdog) { + pr_emerg("Couldn't find brcm,kona-wdt\n"); + return; + } + base = of_iomap(np_wdog, 0); + if (!base) { + pr_emerg("Couldn't map brcm,kona-wdt\n"); + return; } - bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); - - /* - * The aux_val and aux_mask have no effect since L2 cache is already - * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. - */ - return l2x0_of_init(0, ~0); -} - -static void bcm_board_setup_restart(void) -{ - struct device_node *np; + /* Enable watchdog with short timeout (244us). */ + val = readl(base + SECWDOG_OFFSET); + val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK; + val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK | + (0x15 << SECWDOG_CLKS_SHIFT) | + (0x8 << SECWDOG_COUNT_SHIFT); + writel(val, base + SECWDOG_OFFSET); - np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351"); - if (np) { - if (of_device_is_available(np)) - bcm_kona_setup_restart(); - of_node_put(np); - } - /* Restart setup for other boards goes here */ + /* Wait for reset */ + while (1); } -static void __init board_init(void) +static void __init bcm281xx_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, &platform_bus); - - bcm_board_setup_restart(); kona_l2_cache_init(); } -static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, }; +static const char * const bcm281xx_dt_compat[] = { + "brcm,bcm11351", /* Have to use the first number upstreamed */ + NULL, +}; -DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor") - .init_machine = board_init, - .restart = bcm_kona_restart, - .dt_compat = bcm11351_dt_compat, +DT_MACHINE_START(BCM281XX_DT, "BCM281xx Broadcom Application Processor") + .init_machine = bcm281xx_init, + .restart = bcm281xx_restart, + .dt_compat = bcm281xx_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 70f2f3925f0e..70f2f3925f0e 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c index 6939d9017f63..768bc2837bf5 100644 --- a/arch/arm/mach-bcm/kona.c +++ b/arch/arm/mach-bcm/kona.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013 Broadcom Corporation + * Copyright (C) 2012-2014 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -11,55 +11,33 @@ * GNU General Public License for more details. */ -#include <linux/of_address.h> -#include <asm/io.h> +#include <linux/of_platform.h> +#include <asm/hardware/cache-l2x0.h> +#include "bcm_kona_smc.h" #include "kona.h" -static void __iomem *watchdog_base; - -void bcm_kona_setup_restart(void) +void __init kona_l2_cache_init(void) { - struct device_node *np_wdog; + int ret; - /* - * The assumption is that whoever calls bcm_kona_setup_restart() - * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we - * report an error if the DT entry is missing. - */ - np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt"); - if (!np_wdog) { - pr_err("brcm,kona-wdt not found in DT, reboot disabled\n"); + if (!IS_ENABLED(CONFIG_CACHE_L2X0)) return; - } - watchdog_base = of_iomap(np_wdog, 0); - WARN(!watchdog_base, "failed to map watchdog base"); - of_node_put(np_wdog); -} - -#define SECWDOG_OFFSET 0x00000000 -#define SECWDOG_RESERVED_MASK 0xE2000000 -#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000 -#define SECWDOG_EN_MASK 0x08000000 -#define SECWDOG_SRSTEN_MASK 0x04000000 -#define SECWDOG_CLKS_SHIFT 20 -#define SECWDOG_LOCK_SHIFT 0 -void bcm_kona_restart(enum reboot_mode mode, const char *cmd) -{ - uint32_t val; - - if (!watchdog_base) - panic("Watchdog not mapped. Reboot failed.\n"); + ret = bcm_kona_smc_init(); + if (ret) { + pr_info("Secure API not available (%d). Skipping L2 init.\n", + ret); + return; + } - /* Enable watchdog2 with very short timeout. */ - val = readl(watchdog_base + SECWDOG_OFFSET); - val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK; - val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK | - (0x8 << SECWDOG_CLKS_SHIFT) | - (0x8 << SECWDOG_LOCK_SHIFT); - writel(val, watchdog_base + SECWDOG_OFFSET); + bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); - while (1) - ; + /* + * The aux_val and aux_mask have no effect since L2 cache is already + * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. + */ + ret = l2x0_of_init(0, ~0); + if (ret) + pr_err("Couldn't enable L2 cache: %d\n", ret); } diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h index 291eca3e06ff..3a7a017c29cd 100644 --- a/arch/arm/mach-bcm/kona.h +++ b/arch/arm/mach-bcm/kona.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013 Broadcom Corporation + * Copyright (C) 2012-2014 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -11,7 +11,4 @@ * GNU General Public License for more details. */ -#include <linux/reboot.h> - -void bcm_kona_setup_restart(void); -void bcm_kona_restart(enum reboot_mode mode, const char *cmd); +void __init kona_l2_cache_init(void); diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig deleted file mode 100644 index d1f9612f8c15..000000000000 --- a/arch/arm/mach-bcm2835/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -config ARCH_BCM2835 - bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_ERRATA_411920 - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS - select PINCTRL - select PINCTRL_BCM2835 - help - This enables support for the Broadcom BCM2835 SoC. This SoC is - used in the Raspberry Pi and Roku 2 devices. diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile deleted file mode 100644 index 4c3892fe02c3..000000000000 --- a/arch/arm/mach-bcm2835/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += bcm2835.o diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 7a02d222c378..b0cb0722acd2 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,7 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARM_GIC - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select COMMON_CLK select DW_APB_ICTL select DW_APB_TIMER_OF @@ -16,12 +14,10 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP - select HAVE_SMP config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_TWD if SMP endmenu diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index bea6295c8c59..f711498c180c 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -33,20 +33,6 @@ config ARCH_P720T Say Y here if you intend to run this kernel on the ARM Prospector 720T. -config EP72XX_ROM_BOOT - bool "EP721x/EP731x ROM boot" - help - If you say Y here, your CLPS711x-based kernel will use the bootstrap - mode memory map instead of the normal memory map. - - Processors derived from the Cirrus CLPS711X core support two boot - modes. Normal mode boots from the external memory device at CS0. - Bootstrap mode rearranges parts of the memory map, placing an - internal 128 byte bootstrap ROM at CS0. This option performs the - address map changes required to support booting in this mode. - - You almost surely want to say N here. - endmenu endif diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index c5a8ea6839ef..5d6afda1c0e8 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -38,13 +38,6 @@ #define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) #endif -/* - * The physical addresses that the external chip select signals map to is - * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212 - * processors. CONFIG_EP72XX_BOOT_ROM is only available if these - * processors are in use. - */ -#ifndef CONFIG_EP72XX_ROM_BOOT #define CS0_PHYS_BASE (0x00000000) #define CS1_PHYS_BASE (0x10000000) #define CS2_PHYS_BASE (0x20000000) @@ -53,16 +46,6 @@ #define CS5_PHYS_BASE (0x50000000) #define CS6_PHYS_BASE (0x60000000) #define CS7_PHYS_BASE (0x70000000) -#else -#define CS0_PHYS_BASE (0x70000000) -#define CS1_PHYS_BASE (0x60000000) -#define CS2_PHYS_BASE (0x50000000) -#define CS3_PHYS_BASE (0x40000000) -#define CS4_PHYS_BASE (0x30000000) -#define CS5_PHYS_BASE (0x20000000) -#define CS6_PHYS_BASE (0x10000000) -#define CS7_PHYS_BASE (0x00000000) -#endif #define CLPS711X_SRAM_BASE CS6_PHYS_BASE #define CLPS711X_SRAM_SIZE (48 * 1024) diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h deleted file mode 100644 index de6fd192d1c3..000000000000 --- a/arch/arm/mach-clps711x/include/mach/timex.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Bogus value */ -#define CLOCK_TICK_RATE 512000 diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dbf0df8bb0ac..dce8decd5d46 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,9 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select CPU_V6K - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h deleted file mode 100644 index 9b885298f106..000000000000 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, - * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ - * linux/jiffies.h) are not used directly in code. Currently none of the - * code relevant to DaVinci platform depends on these values directly. - */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h deleted file mode 100644 index 251d538541db..000000000000 --- a/arch/arm/mach-dove/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h deleted file mode 100644 index 4fb43b22a102..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 architecture timex specifications - */ - -/* - * On the EBSA, the clock ticks at weird rates. - * This is therefore not used to calculate the - * divisor. - */ -#define CLOCK_TICK_RATE 47894000 - diff --git a/arch/arm/mach-efm32/include/mach/entry-macro.S b/arch/arm/mach-efm32/include/mach/entry-macro.S deleted file mode 100644 index 322159d5ed91..000000000000 --- a/arch/arm/mach-efm32/include/mach/entry-macro.S +++ /dev/null @@ -1,4 +0,0 @@ -/* - * Empty file waiting for deletion once <mach/entry-macro.S> isn't needed any - * more. Patch "ARM: v7-M: drop using mach/entry-macro.S" sitting in next. - */ diff --git a/arch/arm/mach-efm32/include/mach/timex.h b/arch/arm/mach-efm32/include/mach/timex.h deleted file mode 100644 index 7a8b26da6599..000000000000 --- a/arch/arm/mach-efm32/include/mach/timex.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * Empty file waiting for deletion once <mach/timex.h> isn't needed any more. - */ diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index fd021ba539fe..0e571f1749d6 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -117,7 +117,7 @@ void __init ep93xx_map_io(void) #define EP93XX_TIMER4_CLOCK 983040 #define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ) static unsigned int last_jiffy_time; diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h deleted file mode 100644 index 6b3503b01fa6..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8d0042c9d4d3..b2f9bb071557 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -20,6 +20,7 @@ #include <clocksource/samsung_pwm.h> #include <linux/sched.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/of.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -40,7 +41,6 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h deleted file mode 100644 index 6d138750a708..000000000000 --- a/arch/arm/mach-exynos/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/timex.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * EXYNOS4 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h deleted file mode 100644 index 5d7ce36be46f..000000000000 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H __FILE__ - -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <plat/uncompress.h> - -static unsigned int __raw_readl(unsigned int ptr) -{ - return *((volatile unsigned int *)ptr); -} - -static void arch_detect_cpu(void) -{ - u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID); - - /* - * product_id is bits 31:12 - * bits 23:20 describe the exynosX family - * bits 27:24 describe the exynosX family in exynos5420 - */ - chip_id >>= 20; - - if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50) - uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); - else - uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); - - /* - * For preventing FIFO overrun or infinite loop of UART console, - * fifo_max should be the minimum fifo size of all of the UART channels - */ - fifo_mask = S5PV210_UFSTAT_TXMASK; - fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; -} -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 8fd24882f0b1..fe6570ebbdde 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -22,8 +22,6 @@ #include <linux/of_platform.h> #include <linux/sched.h> -#include <plat/devs.h> - #include "regs-pmu.h" /* diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h deleted file mode 100644 index d0fea9d6d4ab..000000000000 --- a/arch/arm/mach-footbridge/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h deleted file mode 100644 index dc5690ba975c..000000000000 --- a/arch/arm/mach-gemini/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Gemini timex specifications - * - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* When AHB bus frequency is 150MHz */ -#define CLOCK_TICK_RATE 38000000 diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0aded64a9ebc..830b76e70250 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -5,7 +5,6 @@ config ARCH_HIGHBANK select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 @@ -14,14 +13,8 @@ config ARCH_HIGHBANK select ARM_PSCI select ARM_TIMER_SP804 select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MAILBOX select PL320_MBOX - select SPARSE_IRQ - select USE_OF select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 1abae5f6a418..feee4dbb0760 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -3,13 +3,9 @@ config ARCH_HI3xxx select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select ARCH_WANT_OPTIONAL_GPIOLIB select CACHE_L2X0 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU + select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select PINCTRL select PINCTRL_SINGLE help diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33567aa5880f..41ffd433f709 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -2,18 +2,11 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM - select ARM_PATCH_PHYS_VIRT select CLKSRC_MMIO - select COMMON_CLK select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 - select MULTI_IRQ_HANDLER select PINCTRL select SOC_BUS - select SPARSE_IRQ - select USE_OF help Support for Freescale MXC/iMX-based family of processors @@ -121,7 +114,6 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select CPU_V6K select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP @@ -132,7 +124,6 @@ config SOC_IMX5 select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select CPU_V7 select MXC_TZIC config SOC_IMX51 @@ -792,14 +783,12 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC - select HAVE_SMP select MFD_SYSCON select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI @@ -817,7 +806,6 @@ config SOC_IMX6SL select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC @@ -833,9 +821,7 @@ config SOC_IMX6SL config SOC_VF610 bool "Vybrid Family VF610 support" - select CPU_V7 select ARM_GIC - select CLKSRC_OF select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h deleted file mode 100644 index 1dcb42028c82..000000000000 --- a/arch/arm/mach-integrator/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h deleted file mode 100644 index 45fb2745bb54..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/timex.h +++ /dev/null @@ -1 +0,0 @@ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h deleted file mode 100644 index 7262ab81419d..000000000000 --- a/arch/arm/mach-iop32x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/timex.h - * - * IOP32x architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h deleted file mode 100644 index 54c589091d6e..000000000000 --- a/arch/arm/mach-iop33x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/timex.h - * - * IOP3xx architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index be882c95bd36..fc4b7b24265e 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> -#include <linux/timex.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> @@ -44,6 +43,17 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#define IXP4XX_TIMER_FREQ 66666000 + +/* + * The timer register doesn't allow to specify the two least significant bits of + * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is + * the best value with the two least significant bits unset. + */ +#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ + (IXP4XX_OST_RELOAD_MASK + 1) + static void __init ixp4xx_clocksource_init(void); static void __init ixp4xx_clockevent_init(void); static struct clock_event_device clockevent_ixp4xx; @@ -519,7 +529,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; + osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; opts = IXP4XX_OST_ENABLE; break; case CLOCK_EVT_MODE_ONESHOT: diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h deleted file mode 100644 index 0396d89f947c..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/timex.h - * - */ - -#include <mach/ixp4xx-regs.h> - -/* - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. - */ -#define IXP4XX_TIMER_FREQ 66666000 -#define CLOCK_TICK_RATE \ - (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 90a708fef541..f50bc936cb84 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,13 +1,9 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 - select CPU_V7 select ARM_GIC select HAVE_ARM_ARCH_TIMER - select HAVE_SMP select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h deleted file mode 100644 index c923cd169b9c..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/timex.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h deleted file mode 100644 index 10f716371bd3..000000000000 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/timex.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - Time Parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#define CLOCK_TICK_RATE KS8695_CLOCK_RATE - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h deleted file mode 100644 index 8d4066b16b3f..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/timex.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/timex.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Rate in Hz of the main system oscillator. This value should match - * the value 'MAIN_OSC_FREQ' in platform.h - */ -#define CLOCK_TICK_RATE 13000000 - -#endif diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h deleted file mode 100644 index 70c9f1d88c02..000000000000 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifdef CONFIG_CPU_MMP2 -#define CLOCK_TICK_RATE 6500000 -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index bbcd2322fd27..2756351dbb35 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -39,6 +39,12 @@ #include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif + #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE #define MAX_DELTA (0xfffffffe) @@ -195,14 +201,14 @@ void __init timer_init(int irq) { timer_config(); - sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ); ckevt.cpumask = cpumask_of(0); setup_irq(irq, &timer_irq); - clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); - clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE, + clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ); + clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ, MIN_DELTA, MAX_DELTA); } diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index e9b45bb58263..82a4ba8578a2 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,14 +2,9 @@ config ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select USE_OF - select CLKSRC_OF select CLKSRC_MMIO - select HAVE_CLK - select COMMON_CLK select GENERIC_IRQ_CHIP select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select PHYLIB if NETDEVICES help Say Y here if you want to run your kernel on hardware with a diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 9625cf378931..a7f959e58c3d 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,50 +1,9 @@ -config ARCH_MSM - bool - -config ARCH_MSM_DT - bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7 - select ARCH_MSM - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm's devicetree based MSM systems. - if ARCH_MSM -menu "Qualcomm MSM SoC Selection" - depends on ARCH_MSM_DT - -config ARCH_MSM8X60 - bool "Enable support for MSM8X60" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select MSM_TIMER - -config ARCH_MSM8960 - bool "Enable support for MSM8960" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select MSM_TIMER - -config ARCH_MSM8974 - bool "Enable support for MSM8974" - select ARM_GIC - select CPU_V7 - select HAVE_ARM_ARCH_TIMER - select HAVE_SMP - select MSM_SCM if SMP - -endmenu - choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A - depends on ARCH_MSM_NODT + depends on ARCH_MSM config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -54,7 +13,7 @@ config ARCH_MSM7X00A select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_SMD_PKG3 config ARCH_MSM7X30 @@ -66,7 +25,7 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC config ARCH_QSD8X50 @@ -78,7 +37,7 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC endchoice @@ -99,7 +58,7 @@ config MSM_VIC bool menu "Qualcomm MSM Board Type" - depends on ARCH_MSM_NODT + depends on ARCH_MSM config MACH_HALIBUT depends on ARCH_MSM @@ -153,7 +112,4 @@ config MSM_GPIOMUX config MSM_SCM bool -config MSM_TIMER - bool - endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8e307a10d3c3..27c078a568df 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_MSM_TIMER) += timer.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o @@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o -obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) - -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 33c7725adae2..0a4899b7d85c 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, unsigned int mtype, void *caller); extern struct smp_operations msm_smp_ops; -extern void msm_cpu_die(unsigned int cpu); struct msm_mmc_platform_data; diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S deleted file mode 100644 index 6c62c3f82fe6..000000000000 --- a/arch/arm/mach-msm/headsmp.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * MSM specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(msm_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(msm_secondary_startup) - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c deleted file mode 100644 index 326a87261f9a..000000000000 --- a/arch/arm/mach-msm/hotplug.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> - -#include <asm/smp_plat.h> - -#include "common.h" - -static inline void cpu_enter_lowpower(void) -{ -} - -static inline void cpu_leave_lowpower(void) -{ -} - -static inline void platform_do_lowpower(unsigned int cpu) -{ - /* Just enter wfi for now. TODO: Properly shut off the cpu. */ - for (;;) { - /* - * here's the WFI - */ - asm("wfi" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * The trouble is, letting people know about this is not really - * possible, since we are currently running incoherently, and - * therefore cannot safely call printk() or anything else - */ - pr_debug("CPU%u: spurious wakeup call\n", cpu); - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref msm_cpu_die(unsigned int cpu) -{ - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); -} diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h deleted file mode 100644 index a62e6b215aec..000000000000 --- a/arch/arm/mach-msm/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-msm/include/mach/timex.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c deleted file mode 100644 index fd1644987534..000000000000 --- a/arch/arm/mach-msm/timer.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/cpu.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/sched_clock.h> - -#include <asm/mach/time.h> - -#include "common.h" - -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0004 -#define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) -#define TIMER_ENABLE_EN BIT(0) -#define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x10 -#define DGT_CLK_CTL_DIV_4 0x3 -#define TIMER_STS_GPT0_CLR_PEND BIT(10) - -#define GPT_HZ 32768 - -#define MSM_DGT_SHIFT 5 - -static void __iomem *event_base; -static void __iomem *sts_base; - -static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - /* Stop the timer tick */ - if (evt->mode == CLOCK_EVT_MODE_ONESHOT) { - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - } - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static int msm_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - - writel_relaxed(ctrl, event_base + TIMER_CLEAR); - writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); - - if (sts_base) - while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND) - cpu_relax(); - - writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); - return 0; -} - -static void msm_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 ctrl; - - ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN); - - switch (mode) { - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Timer is enabled in set_next_event */ - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - } - writel_relaxed(ctrl, event_base + TIMER_ENABLE); -} - -static struct clock_event_device __percpu *msm_evt; - -static void __iomem *source_base; - -static notrace cycle_t msm_read_timer_count(struct clocksource *cs) -{ - return readl_relaxed(source_base + TIMER_COUNT_VAL); -} - -static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) -{ - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; -} - -static struct clocksource msm_clocksource = { - .name = "dg_timer", - .rating = 300, - .read = msm_read_timer_count, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int msm_timer_irq; -static int msm_timer_has_ppi; - -static int msm_local_timer_setup(struct clock_event_device *evt) -{ - int cpu = smp_processor_id(); - int err; - - evt->irq = msm_timer_irq; - evt->name = "msm_timer"; - evt->features = CLOCK_EVT_FEAT_ONESHOT; - evt->rating = 200; - evt->set_mode = msm_timer_set_mode; - evt->set_next_event = msm_timer_set_next_event; - evt->cpumask = cpumask_of(cpu); - - clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff); - - if (msm_timer_has_ppi) { - enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); - } else { - err = request_irq(evt->irq, msm_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING | - IRQF_TRIGGER_RISING, "gp_timer", evt); - if (err) - pr_err("request_irq failed\n"); - } - - return 0; -} - -static void msm_local_timer_stop(struct clock_event_device *evt) -{ - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); - disable_percpu_irq(evt->irq); -} - -static int msm_timer_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - /* - * Grab cpu pointer in each case to avoid spurious - * preemptible warnings - */ - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_STARTING: - msm_local_timer_setup(this_cpu_ptr(msm_evt)); - break; - case CPU_DYING: - msm_local_timer_stop(this_cpu_ptr(msm_evt)); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block msm_timer_cpu_nb = { - .notifier_call = msm_timer_cpu_notify, -}; - -static u64 notrace msm_sched_clock_read(void) -{ - return msm_clocksource.read(&msm_clocksource); -} - -static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, - bool percpu) -{ - struct clocksource *cs = &msm_clocksource; - int res = 0; - - msm_timer_irq = irq; - msm_timer_has_ppi = percpu; - - msm_evt = alloc_percpu(struct clock_event_device); - if (!msm_evt) { - pr_err("memory allocation failed for clockevents\n"); - goto err; - } - - if (percpu) - res = request_percpu_irq(irq, msm_timer_interrupt, - "gp_timer", msm_evt); - - if (res) { - pr_err("request_percpu_irq failed\n"); - } else { - res = register_cpu_notifier(&msm_timer_cpu_nb); - if (res) { - free_percpu_irq(irq, msm_evt); - goto err; - } - - /* Immediately configure the timer on the boot CPU */ - msm_local_timer_setup(__this_cpu_ptr(msm_evt)); - } - -err: - writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE); - res = clocksource_register_hz(cs, dgt_hz); - if (res) - pr_err("clocksource_register failed\n"); - sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz); -} - -#ifdef CONFIG_OF -static void __init msm_dt_timer_init(struct device_node *np) -{ - u32 freq; - int irq; - struct resource res; - u32 percpu_offset; - void __iomem *base; - void __iomem *cpu0_base; - - base = of_iomap(np, 0); - if (!base) { - pr_err("Failed to map event base\n"); - return; - } - - /* We use GPT0 for the clockevent */ - irq = irq_of_parse_and_map(np, 1); - if (irq <= 0) { - pr_err("Can't get irq\n"); - return; - } - - /* We use CPU0's DGT for the clocksource */ - if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) - percpu_offset = 0; - - if (of_address_to_resource(np, 0, &res)) { - pr_err("Failed to parse DGT resource\n"); - return; - } - - cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res)); - if (!cpu0_base) { - pr_err("Failed to map source base\n"); - return; - } - - if (of_property_read_u32(np, "clock-frequency", &freq)) { - pr_err("Unknown frequency\n"); - return; - } - - event_base = base + 0x4; - sts_base = base + 0x88; - source_base = cpu0_base + 0x24; - freq /= 4; - writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL); - - msm_timer_init(freq, 32, irq, !!percpu_offset); -} -CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); -CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); -#endif - -static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, - u32 sts) -{ - void __iomem *base; - - base = ioremap(addr, SZ_256); - if (!base) { - pr_err("Failed to map timer base\n"); - return -ENOMEM; - } - event_base = base + event; - source_base = base + source; - if (sts) - sts_base = base + sts; - - return 0; -} - -void __init msm7x01_timer_init(void) -{ - struct clocksource *cs = &msm_clocksource; - - if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) - return; - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - /* 600 KHz */ - msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, - false); -} - -void __init msm7x30_timer_init(void) -{ - if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) - return; - msm_timer_init(24576000 / 4, 32, 1, false); -} - -void __init qsd8x50_timer_init(void) -{ - if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) - return; - msm_timer_init(19200000 / 4, 32, 7, false); -} diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h deleted file mode 100644 index 0e8c443c723a..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index df9e7d270810..ca004aceaf8e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -2,15 +2,10 @@ config ARCH_MVEBU bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select IRQ_DOMAIN - select MULTI_IRQ_HANDLER select PINCTRL select PLAT_ORION - select SPARSE_IRQ - select CLKDEV_LOOKUP select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB @@ -25,7 +20,6 @@ menu "Marvell SOC with device tree" config MACH_ARMADA_370_XP bool select ARMADA_370_XP_TIMER - select HAVE_SMP select CACHE_L2X0 select CPU_PJ4B diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 878aebe98dcc..d99846103bbb 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -3,8 +3,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a -obj-y += system-controller.o mvebu-soc-id.o +obj-y += coherency.o coherency_ll.o pmsu.o system-controller.o mvebu-soc-id.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 5b793ebb0a24..a57cb36d52af 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -32,11 +32,6 @@ #include "coherency.h" #include "mvebu-soc-id.h" -static void __init armada_370_xp_map_io(void) -{ - debug_ll_io_init(); -} - static void __init armada_370_xp_timer_and_clk_init(void) { of_clk_init(NULL); @@ -91,7 +86,6 @@ static const char * const armada_370_xp_dt_compat[] = { DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .smp = smp_ops(armada_xp_smp_ops), .init_machine = armada_370_xp_dt_init, - .map_io = armada_370_xp_map_io, .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index a7fb89a5b5d9..e6e300afe836 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -54,7 +54,7 @@ static const struct mvebu_system_controller orion_system_controller = { .system_soft_reset = 0x1, }; -static struct of_device_id of_system_controller_table[] = { +static const struct of_device_id of_system_controller_table[] = { { .compatible = "marvell,orion-system-controller", .data = (void *) &orion_system_controller, @@ -90,13 +90,12 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) static int __init mvebu_system_controller_init(void) { + const struct of_device_id *match; struct device_node *np; - np = of_find_matching_node(NULL, of_system_controller_table); + np = of_find_matching_node_and_match(NULL, of_system_controller_table, + &match); if (np) { - const struct of_device_id *match = - of_match_node(of_system_controller_table, np); - BUG_ON(!match); system_controller_base = of_iomap(np, 0); mvebu_sc = (struct mvebu_system_controller *)match->data; of_node_put(np); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8cde9e05b5d6..84794137b175 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,11 +16,7 @@ config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP select CLKSRC_MMIO - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_CLK_PREPARE select PINCTRL select SOC_BUS select SOC_IMX23 diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h deleted file mode 100644 index 1120dd0ba393..000000000000 --- a/arch/arm/mach-netx/include/mach/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/timex.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 100000000 diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 3177c7a40930..5fb2a590ec17 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -28,6 +28,9 @@ #include <asm/mach/time.h> #include <mach/netx-regs.h> +#define NETX_CLOCK_FREQ 100000000 +#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ) + #define TIMER_CLOCKEVENT 0 #define TIMER_CLOCKSOURCE 1 @@ -41,7 +44,7 @@ static void netx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; @@ -114,7 +117,7 @@ void __init netx_timer_init(void) /* Reset the timer value to zero */ writel(0, NETX_GPIO_COUNTER_CURRENT(0)); - writel(LATCH, NETX_GPIO_COUNTER_MAX(0)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0)); /* acknowledge interrupt */ writel(COUNTER_BIT(0), NETX_GPIO_IRQ); @@ -137,11 +140,11 @@ void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE), - "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); + "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ netx_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ, 0xa00, 0xfffffffe); } diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 4d42da49753c..486d301f43fd 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,16 +6,11 @@ config ARCH_NOMADIK select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK select PINCTRL_STN8815 - select SPARSE_IRQ - select USE_OF help Support for the Nomadik platform by ST-Ericsson diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index 59d8f0a70919..bc41f26c1a12 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -3,14 +3,9 @@ config ARCH_NSPIRE depends on ARCH_MULTI_V4_V5 depends on MMU select CPU_ARM926T - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select SPARSE_IRQ select ARM_AMBA select ARM_VIC select ARM_TIMER_SP804 - select USE_OF - select CLKSRC_OF help This enables support for systems using the TI-NSPIRE CPU diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h deleted file mode 100644 index 4793790d53cc..000000000000 --- a/arch/arm/mach-omap1/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ac4882511749..27fc52d418a5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -6,7 +6,6 @@ config ARCH_OMAP2 depends on ARCH_MULTI_V6 select ARCH_OMAP2PLUS select CPU_V6 - select MULTI_IRQ_HANDLER select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 @@ -15,8 +14,6 @@ config ARCH_OMAP3 select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER select OMAP_INTERCONNECT select PM_OPP if PM select PM_RUNTIME if CPU_IDLE @@ -32,10 +29,8 @@ config ARCH_OMAP4 select ARM_ERRATA_720789 select ARM_GIC select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select OMAP_INTERCONNECT select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -51,10 +46,8 @@ config SOC_OMAP5 select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP @@ -64,16 +57,12 @@ config SOC_AM33XX select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER config SOC_AM43XX bool "TI AM43x" depends on ARCH_MULTI_V7 - select CPU_V7 select ARCH_OMAP2PLUS select ARCH_HAS_OPP - select MULTI_IRQ_HANDLER select ARM_GIC select MACH_OMAP_GENERIC @@ -84,8 +73,6 @@ config SOC_DRA7XX select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 - select HAVE_SMP select HAVE_ARM_ARCH_TIMER config ARCH_OMAP2PLUS @@ -96,16 +83,12 @@ config ARCH_OMAP2PLUS select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MACH_OMAP_GENERIC select OMAP_DM_TIMER select PINCTRL select SOC_BUS - select SPARSE_IRQ select TI_PRIV_EDMA - select USE_OF help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h deleted file mode 100644 index de9f8fc40e7c..000000000000 --- a/arch/arm/mach-omap2/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/timex.h - */ - -#include <plat/timex.h> diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h deleted file mode 100644 index 4c69820e0810..000000000000 --- a/arch/arm/mach-orion5x/include/mach/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/timex.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index b1022f4315f7..eca9eb1c5931 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,12 +1,7 @@ config ARCH_PICOXCELL bool "Picochip PicoXcell" if ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT select ARM_VIC - select CPU_V6K select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select HAVE_TCM select NO_IOPORT - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 6988b117fc17..3e8189186a5b 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,9 +1,8 @@ config ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PINCTRL select PINCTRL_SIRF @@ -17,7 +16,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ help Support for CSR SiRFSoC ARM Cortex A9 Platform @@ -25,7 +23,6 @@ config ARCH_ATLAS6 config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ select ZONE_DMA help @@ -35,9 +32,7 @@ config ARCH_MARCO bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform" default y select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_SMP select SMP_ON_UP if SMP help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index d49aff74de98..47c7819edb9b 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -15,7 +15,7 @@ #include <linux/of_platform.h> #include "common.h" -void __init sirfsoc_init_late(void) +static void __init sirfsoc_init_late(void) { sirfsoc_pm_init(); } @@ -27,7 +27,7 @@ static __init void sirfsoc_map_io(void) } #ifdef CONFIG_ARCH_ATLAS6 -static const char *atlas6_dt_match[] __initdata = { +static const char *atlas6_dt_match[] __initconst = { "sirf,atlas6", NULL }; @@ -37,12 +37,11 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, - .restart = sirfsoc_restart, MACHINE_END #endif #ifdef CONFIG_ARCH_PRIMA2 -static const char *prima2_dt_match[] __initdata = { +static const char *prima2_dt_match[] __initconst = { "sirf,prima2", NULL }; @@ -53,12 +52,11 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, .dt_compat = prima2_dt_match, - .restart = sirfsoc_restart, MACHINE_END #endif #ifdef CONFIG_ARCH_MARCO -static const char *marco_dt_match[] __initdata = { +static const char *marco_dt_match[] __initconst = { "sirf,marco", NULL }; @@ -69,6 +67,5 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, - .restart = sirfsoc_restart, MACHINE_END #endif diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 4b768060a858..07d3e5ed9264 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); extern void __init sirfsoc_of_irq_init(void); -extern void sirfsoc_restart(enum reboot_mode, const char *); extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); #ifndef CONFIG_DEBUG_LL diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index cbcbe9cb094c..c7102539c0b0 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -11,24 +11,23 @@ #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> -struct l2x0_aux -{ +struct l2x0_aux { u32 val; u32 mask; }; -static struct l2x0_aux prima2_l2x0_aux __initconst = { +static const struct l2x0_aux prima2_l2x0_aux __initconst = { .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT, .mask = 0, }; -static struct l2x0_aux marco_l2x0_aux __initconst = { +static const struct l2x0_aux marco_l2x0_aux __initconst = { .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT), .mask = L2X0_AUX_CTRL_MASK, }; -static struct of_device_id sirf_l2x0_ids[] __initconst = { +static const struct of_device_id sirf_l2x0_ids[] __initconst = { { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, }, { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, }, {}, diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index e358b0736dea..335c12e92262 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -138,9 +138,9 @@ static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus) } struct smp_operations sirfsoc_smp_ops __initdata = { - .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, - .smp_secondary_init = sirfsoc_secondary_init, - .smp_boot_secondary = sirfsoc_boot_secondary, + .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, + .smp_secondary_init = sirfsoc_secondary_init, + .smp_boot_secondary = sirfsoc_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = sirfsoc_cpu_die, #endif diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index ccb53391147a..4887a2a4c698 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -13,57 +13,38 @@ #include <linux/device.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/platform_device.h> #include <linux/reboot.h> +#include <linux/reset-controller.h> -void __iomem *sirfsoc_rstc_base; -static DEFINE_MUTEX(rstc_lock); - -static struct of_device_id rstc_ids[] = { - { .compatible = "sirf,prima2-rstc" }, - { .compatible = "sirf,marco-rstc" }, - {}, -}; +#include <asm/system_misc.h> -static int __init sirfsoc_of_rstc_init(void) -{ - struct device_node *np; +#define SIRFSOC_RSTBIT_NUM 64 - np = of_find_matching_node(NULL, rstc_ids); - if (!np) { - pr_err("unable to find compatible sirf rstc node in dtb\n"); - return -ENOENT; - } - - sirfsoc_rstc_base = of_iomap(np, 0); - if (!sirfsoc_rstc_base) - panic("unable to map rstc cpu registers\n"); - - of_node_put(np); - - return 0; -} -early_initcall(sirfsoc_of_rstc_init); +static void __iomem *sirfsoc_rstc_base; +static DEFINE_MUTEX(rstc_lock); -int sirfsoc_reset_device(struct device *dev) +static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, + unsigned long sw_reset_idx) { - u32 reset_bit; + u32 reset_bit = sw_reset_idx; - if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit)) + if (reset_bit >= SIRFSOC_RSTBIT_NUM) return -EINVAL; mutex_lock(&rstc_lock); - if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) { + if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) { /* * Writing 1 to this bit resets corresponding block. Writing 0 to this * bit de-asserts reset signal of the corresponding block. * datasheet doesn't require explicit delay between the set and clear * of reset bit. it could be shorter if tests pass. */ - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); msleep(10); - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* @@ -73,9 +54,9 @@ int sirfsoc_reset_device(struct device *dev) * datasheet doesn't require explicit delay between the set and clear * of reset bit. it could be shorter if tests pass. */ - writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); + writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); msleep(10); - writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); + writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); @@ -83,9 +64,57 @@ int sirfsoc_reset_device(struct device *dev) return 0; } +static struct reset_control_ops sirfsoc_rstc_ops = { + .reset = sirfsoc_reset_module, +}; + +static struct reset_controller_dev sirfsoc_reset_controller = { + .ops = &sirfsoc_rstc_ops, + .nr_resets = SIRFSOC_RSTBIT_NUM, +}; + #define SIRFSOC_SYS_RST_BIT BIT(31) -void sirfsoc_restart(enum reboot_mode mode, const char *cmd) +static void sirfsoc_restart(enum reboot_mode mode, const char *cmd) { writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); } + +static int sirfsoc_rstc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + sirfsoc_rstc_base = of_iomap(np, 0); + if (!sirfsoc_rstc_base) { + dev_err(&pdev->dev, "unable to map rstc cpu registers\n"); + return -ENOMEM; + } + + sirfsoc_reset_controller.of_node = np; + arm_pm_restart = sirfsoc_restart; + + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + reset_controller_register(&sirfsoc_reset_controller); + + return 0; +} + +static const struct of_device_id rstc_ids[] = { + { .compatible = "sirf,prima2-rstc" }, + { .compatible = "sirf,marco-rstc" }, + {}, +}; + +static struct platform_driver sirfsoc_rstc_driver = { + .probe = sirfsoc_rstc_probe, + .driver = { + .name = "sirfsoc_rstc", + .owner = THIS_MODULE, + .of_match_table = rstc_ids, + }, +}; + +static int __init sirfsoc_rstc_init(void) +{ + return platform_driver_register(&sirfsoc_rstc_driver); +} +subsys_initcall(sirfsoc_rstc_init); diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index 9f2da2eec4dc..a17c88b74fa1 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -137,4 +137,4 @@ postcore_initcall(sirfsoc_rtciobrg_init); MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, " "Barry Song <baohua.song@csr.com>"); MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h deleted file mode 100644 index af6760a50e1a..000000000000 --- a/arch/arm/mach-pxa/include/mach/timex.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/timex.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* Various drivers are still using the constant of CLOCK_TICK_RATE, for - * those drivers to at least work, the definition is provided here. - * - * NOTE: this is no longer accurate when multiple processors and boards - * are selected, newer drivers should not depend on this any more. Use - * either the clocksource/clockevent or get this at run-time by calling - * get_clock_tick_rate() (as defined in generic.c). - */ - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig new file mode 100644 index 000000000000..a028be234334 --- /dev/null +++ b/arch/arm/mach-qcom/Kconfig @@ -0,0 +1,33 @@ +config ARCH_QCOM + bool "Qualcomm Support" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_GIC + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_SMP + select QCOM_SCM if SMP + help + Support for Qualcomm's devicetree based systems. + +if ARCH_QCOM + +menu "Qualcomm SoC Selection" + +config ARCH_MSM8X60 + bool "Enable support for MSM8X60" + select CLKSRC_QCOM + +config ARCH_MSM8960 + bool "Enable support for MSM8960" + select CLKSRC_QCOM + +config ARCH_MSM8974 + bool "Enable support for MSM8974" + select HAVE_ARM_ARCH_TIMER + +endmenu + +config QCOM_SCM + bool + +endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile new file mode 100644 index 000000000000..8f756ae1ae31 --- /dev/null +++ b/arch/arm/mach-qcom/Makefile @@ -0,0 +1,5 @@ +obj-y := board.o +obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o + +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c index 1f11d93e700e..830f69c3a3ce 100644 --- a/arch/arm/mach-msm/board-dt.c +++ b/arch/arm/mach-qcom/board.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved. +/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -17,10 +17,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" +extern struct smp_operations qcom_smp_ops; -static const char * const msm_dt_match[] __initconst = { - "qcom,msm8660-fluid", +static const char * const qcom_dt_match[] __initconst = { "qcom,msm8660-surf", "qcom,msm8960-cdp", NULL @@ -31,11 +30,11 @@ static const char * const apq8074_dt_match[] __initconst = { NULL }; -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), - .dt_compat = msm_dt_match, +DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)") + .smp = smp_ops(qcom_smp_ops), + .dt_compat = qcom_dt_match, MACHINE_END -DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") +DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)") .dt_compat = apq8074_dt_match, MACHINE_END diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-qcom/platsmp.c index f10a1f58fde9..9c53ea70550d 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -2,6 +2,7 @@ * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2014 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,42 +13,38 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include <asm/cputype.h> -#include <asm/mach-types.h> #include <asm/smp_plat.h> #include "scm-boot.h" -#include "common.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 #define SCSS_CPU1CORE_RESET 0xD80 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 -extern void msm_secondary_startup(void); +extern void secondary_startup(void); static DEFINE_SPINLOCK(boot_lock); +#ifdef CONFIG_HOTPLUG_CPU +static void __ref qcom_cpu_die(unsigned int cpu) +{ + wfi(); +} +#endif + static inline int get_core_count(void) { /* 1 + the PART[1:0] field of MIDR */ return ((read_cpuid_id() >> 4) & 3) + 1; } -static void msm_secondary_init(unsigned int cpu) +static void qcom_secondary_init(unsigned int cpu) { /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - smp_wmb(); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); @@ -57,7 +54,7 @@ static void msm_secondary_init(unsigned int cpu) static void prepare_cold_cpu(unsigned int cpu) { int ret; - ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), + ret = scm_set_boot_addr(virt_to_phys(secondary_startup), SCM_FLAG_COLDBOOT_CPU1); if (ret == 0) { void __iomem *sc1_base_ptr; @@ -73,9 +70,8 @@ static void prepare_cold_cpu(unsigned int cpu) "address\n"); } -static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; static int cold_boot_done; /* Only need to bring cpu out of reset this way once */ @@ -91,39 +87,19 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu_logical_map(cpu); - sync_cache_w(&pen_release); - - /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } /* @@ -132,7 +108,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) * does not support the ARM SCU, so just set the possible cpu mask to * NR_CPUS. */ -static void __init msm_smp_init_cpus(void) +static void __init qcom_smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); @@ -146,16 +122,16 @@ static void __init msm_smp_init_cpus(void) set_cpu_possible(i, true); } -static void __init msm_smp_prepare_cpus(unsigned int max_cpus) +static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { } -struct smp_operations msm_smp_ops __initdata = { - .smp_init_cpus = msm_smp_init_cpus, - .smp_prepare_cpus = msm_smp_prepare_cpus, - .smp_secondary_init = msm_secondary_init, - .smp_boot_secondary = msm_boot_secondary, +struct smp_operations qcom_smp_ops __initdata = { + .smp_init_cpus = qcom_smp_init_cpus, + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = qcom_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_die = msm_cpu_die, + .cpu_die = qcom_cpu_die, #endif }; diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c index 45cee3e469a5..45cee3e469a5 100644 --- a/arch/arm/mach-msm/scm-boot.c +++ b/arch/arm/mach-qcom/scm-boot.c diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h index 7be32ff5d687..7be32ff5d687 100644 --- a/arch/arm/mach-msm/scm-boot.h +++ b/arch/arm/mach-qcom/scm-boot.h diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c index c536fd6bf827..c536fd6bf827 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-qcom/scm.c diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h index 00b31ea58f29..00b31ea58f29 100644 --- a/arch/arm/mach-msm/scm.h +++ b/arch/arm/mach-qcom/scm.h diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h deleted file mode 100644 index 4eeb069373c2..000000000000 --- a/arch/arm/mach-realview/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/timex.h - * - * RealView architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index cf073dea5784..6b2f58645a73 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -6,9 +6,6 @@ config ARCH_ROCKCHIP select ARM_GIC select CACHE_L2X0 select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select DW_APB_TIMER_OF select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h deleted file mode 100644 index dd75e7387bbe..000000000000 --- a/arch/arm/mach-rpc/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * RiscPC architecture timex specifications - */ - -/* - * On the RiscPC, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 9a5158861ca9..2689771c1d38 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -24,6 +24,9 @@ #include <asm/mach/time.h> +#define RPC_CLOCK_FREQ 2000000 +#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) + static u32 ioc_timer_gettimeoffset(void) { unsigned int count1, count2, status; @@ -46,23 +49,23 @@ static u32 ioc_timer_gettimeoffset(void) * and count2. */ if (status & (1 << 5)) - offset -= LATCH; + offset -= RPC_LATCH; } else if (count2 > count1) { /* * We have just had another interrupt between reading * count1 and count2. */ - offset -= LATCH; + offset -= RPC_LATCH; } - offset = (LATCH - offset) * (tick_nsec / 1000); - return ((offset + LATCH/2) / LATCH) * 1000; + offset = (RPC_LATCH - offset) * (tick_nsec / 1000); + return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; } void __init ioctime_init(void) { - ioc_writeb(LATCH & 255, IOC_T0LTCHL); - ioc_writeb(LATCH >> 8, IOC_T0LTCHH); + ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); + ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH); ioc_writeb(0, IOC_T0GO); } diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f2727f2cc661..ba1cc6246778 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -521,7 +521,6 @@ config MACH_ANUBIS select HAVE_PATA_PLATFORM select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA64 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -562,7 +561,6 @@ config MACH_OSIRIS select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_GPIO_EXTRA128 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index d39d3c787580..d1afcf9252d1 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -30,13 +30,12 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> #include <mach/hardware.h> - -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index 11b3b28457bb..192a5b2550b0 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -31,13 +31,12 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> #include <mach/hardware.h> - -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index aaf006d1d6dc..5527226fd61f 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -34,6 +34,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/hardware.h> #include <linux/atomic.h> @@ -43,7 +44,6 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1d77d709ec22..1bc8e73c94f9 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -44,7 +45,6 @@ #include <asm/mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <mach/dma.h> #include <plat/cpu.h> @@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) } else { samsung_cpu_id = s3c24xx_read_idcode_v4(); } - s3c24xx_init_cpu(); s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 30aa53ff07a6..09aa12da1789 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/cpu.h> #include <plat/dma-s3c24xx.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index b7e094671522..0c0106d1a4d1 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index cd25de28804c..2f8e8a3017df 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <mach/map.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 95b9f759fe97..f4096ec0700a 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <mach/dma.h> @@ -23,7 +24,6 @@ #include <plat/dma-s3c24xx.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 2558952e3147..2f39737544c0 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h index 7b542f7b7938..4d5f5768f700 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h - * +/* * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> * * Samsung RTC Controller core functions @@ -9,19 +8,19 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_RTC_CORE_H -#define __ASM_PLAT_RTC_CORE_H __FILE__ +#ifndef __RTC_CORE_H +#define __RTC_CORE_H __FILE__ /* These functions are only for use with the core support code, such as * the cpu specific initialisation code */ +extern struct platform_device s3c_device_rtc; + /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; -#endif } -#endif /* __ASM_PLAT_RTC_CORE_H */ +#endif /* __RTC_CORE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h deleted file mode 100644 index 544da41979db..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - timer tick support - */ - -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; -} diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h deleted file mode 100644 index fe9ca1ffd51b..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 284ea1f44205..8ac9554aa996 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/proc_fs.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -49,7 +50,6 @@ #include <asm/mach-types.h> #include <mach/fb.h> -#include <plat/regs-serial.h> #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 2a16f8fb3584..81a270af2336 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/i2c.h> @@ -32,7 +33,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 6beab674c147..d8f6bb1096cb 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_device.h> @@ -33,7 +34,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 981ba1eb9fdc..e371ff53a408 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/dm9000.h> #include <linux/ata_platform.h> @@ -55,7 +56,6 @@ #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "bast.h" diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index ee7bb2905a99..dc4db849f0fd 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -35,6 +35,7 @@ #include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/io.h> #include <linux/i2c.h> @@ -81,7 +82,6 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index de0832181d8c..e453acd92cbf 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -62,7 +63,6 @@ #include <plat/gpio-cfg.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 67cb8e948b7e..5faa7239e7d6 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -31,7 +32,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <plat/regs-serial.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 1f1559713d8b..9e57fd9f4f3b 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -23,6 +23,7 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/dm9000.h> #include <linux/platform_data/at24.h> #include <linux/platform_device.h> @@ -37,7 +38,6 @@ #include <mach/fb.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 997684f17930..4cccaad34847 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/timer.h> #include <linux/io.h> #include <linux/mmc/host.h> @@ -43,7 +44,6 @@ #include <asm/mach/map.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/regs-serial.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 575d28c9e6c6..3066851f584d 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/string.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -38,7 +39,6 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index f84f2a4c0c6d..a4ae4bb3666d 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/clk.h> #include <linux/i2c.h> #include <linux/io.h> @@ -44,7 +45,6 @@ #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 7e16b0740ec1..bdb3faac2d9b 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -15,6 +15,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -32,7 +33,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b534b76812e3..8c12787a8fd3 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -31,6 +31,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/io.h> @@ -49,7 +50,6 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <mach/regs-lcd.h> -#include <plat/regs-serial.h> #include <mach/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 0a5456cda1bc..afb784e934c8 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/device.h> @@ -57,7 +58,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index b36edce8b2b8..e6535ce1bc5c 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -23,6 +23,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/serial.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -49,7 +50,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index f50454a34f72..70f0900d4bca 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -19,13 +19,13 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index a773789e4f38..f32924ee0e9f 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -35,6 +35,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -46,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index f5bc721217e3..233fe52d2015 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -33,7 +34,6 @@ #include <asm/mach-types.h> //#include <asm/debug-ll.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 12023cae4378..b3b54d8e1410 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/partitions.h> @@ -34,7 +35,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> #include <mach/regs-s3c2443-clock.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index de2e5d39a847..d071dcfea548 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,7 +32,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index d9933fcc6cc8..06c4d77de3a5 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -31,7 +32,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 7fad8f055cab..4108b2f0cede 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -33,6 +33,7 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -44,7 +45,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 755df489a45f..1cc5b1bd51cd 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -25,6 +25,7 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/arch.h> @@ -45,7 +46,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/regs-serial.h> #include <plat/samsung-time.h> #include "bast.h" diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f7ec9c550787..40868c0e0a68 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/mtd.h> @@ -32,7 +33,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 052ca23393a7..68ea5b7e5dc7 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -33,9 +33,9 @@ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <mach/regs-irq.h> diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index ffb92cbca08c..04b58cb49888 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -21,6 +21,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> @@ -37,7 +38,6 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/cpu.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 0251650cbf80..657cbaca80ac 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/reboot.h> @@ -43,7 +44,6 @@ #include <plat/nand-core.h> #include <plat/pll.h> #include <plat/pm.h> -#include <plat/regs-serial.h> #include <plat/regs-spi.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 8e01b4f2df35..9fe260ae11e1 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -48,6 +48,7 @@ #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -61,7 +62,6 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> #include "common.h" diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 886c2147062b..c7a804d0348e 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -34,6 +34,7 @@ #include <asm/system_misc.h> #include <mach/regs-s3c2443-clock.h> +#include <mach/rtc-core.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -43,7 +44,6 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> -#include <plat/rtc-core.h> #include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 911b555029fc..fe30ebb234d2 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/device.h> @@ -35,7 +36,6 @@ #include <plat/cpu-freq.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd47c8fa07fa..c9b91223697c 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -25,13 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include "regs-mem.h" diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S index 7f378b662da6..d833d616bd2e 100644 --- a/arch/arm/mach-s3c24xx/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep.S @@ -25,13 +25,13 @@ */ #include <linux/linkage.h> +#include <linux/serial_s3c.h> #include <asm/assembler.h> #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 76ab595d849b..5c45aae675b6 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/io.h> @@ -50,7 +51,6 @@ #include <plat/irq-uart.h> #include <plat/pwm-core.h> #include <plat/regs-irqtype.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index dd9ccca5de1f..c9b95325b672 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h deleted file mode 100644 index db9c1b1d56a4..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/tick.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h deleted file mode 100644 index fb2e8cd40829..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index ddf65583a5d8..ae4ea7601f60 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -20,13 +20,13 @@ #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/of.h> #include <mach/map.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <plat/cpu.h> #include <plat/pm.h> diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index ddeb0e51a962..55eb6a69655b 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -20,6 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -41,7 +42,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 3df3c372ee1f..4b0199fff9f5 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/fb.h> #include <linux/io.h> @@ -51,7 +52,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/regs-serial.h> #include <plat/fb.h> #include <plat/sdhci.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 0431016925b9..72cee08c8bf5 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -33,7 +34,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <mach/gpio-samsung.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 8d553a418e1c..9cbc07602ef3 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -22,6 +22,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/types.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/mmc-sdhci-s3c.h> -#include <plat/regs-serial.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 2067b0bf55b4..67f06a9ae656 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -36,7 +37,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 5152026f0e19..fbad2af1ef16 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -23,6 +23,7 @@ #include <linux/mtd/partitions.h> #include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/types.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/devs.h> #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/regs-serial.h> #include <linux/platform_data/touchscreen-s3c2410.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 6e72bd5c1d0c..78dd6f73c072 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/pwm_backlight.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/spi/spi_gpio.h> #include <linux/usb/gpio_vbus.h> #include <linux/platform_data/s3c-hsotg.h> @@ -33,7 +34,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <linux/platform_data/hwmon-s3c.h> -#include <plat/regs-serial.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 150f55fb9e33..c85d1cbe769f 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/io.h> @@ -29,8 +30,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <plat/regs-serial.h> - #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 43261d24a0a5..c6a8b2ab0240 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> @@ -55,7 +56,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> #include <linux/platform_data/ata-samsung_cf.h> diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 3db0c98222f7..8c42807bf579 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -34,7 +35,6 @@ #include <asm/irq.h> #include <plat/cpu-freq.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 72b2278953a8..5be3f09bac92 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -35,7 +36,6 @@ #include <asm/irq.h> #include <plat/cpu-freq.h> -#include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index f07edc304efb..9a43be002d78 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -50,7 +51,6 @@ #include <plat/gpio-cfg.h> #include <plat/pwm-core.h> #include <plat/regs-irqtype.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index 5e2916fb19a9..8759e7882bcb 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -10,11 +10,10 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <plat/map-base.h> #include <plat/map-s5p.h> -#include <plat/regs-serial.h> - .macro addruart, rp, rv, tmp mov \rp, #0xE0000000 orr \rp, \rp, #0x00100000 diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h deleted file mode 100644 index 4b91faa195a8..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/timex.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S5P64X0 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c index d5f0fd66b635..2ed921e095dc 100644 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ b/arch/arm/mach-s5p64x0/irq-pm.c @@ -14,9 +14,9 @@ #include <linux/syscore_ops.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> -#include <plat/regs-serial.h> #include <plat/pm.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 9efdcc03df3b..6840e197cb2d 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index c3cacc067efe..fa1341c074ca 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/module.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c5a8eeacf81c..6a41bf7dacf6 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <clocksource/samsung_pwm.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -49,7 +50,6 @@ #include <plat/onenand-core.h> #include <plat/pwm-core.h> #include <plat/spi-core.h> -#include <plat/regs-serial.h> #include <plat/watchdog-reset.h> #include "common.h" diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 66cb7f16bf2a..22c23859e45e 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -13,8 +13,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h deleted file mode 100644 index 0af8e41230ed..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/tick.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S3C64XX - Timer tick support definitions - * - * Based on mach-s3c6400/include/mach/tick.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -#include <linux/irqchip/arm-vic.h> - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h deleted file mode 100644 index 47ffb17aff96..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 9e256b9fc930..668af3ac31f3 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -16,6 +16,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> @@ -37,7 +38,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 26027a29b8a1..7024dcd0e40a 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -24,6 +24,7 @@ #include <linux/sched.h> #include <linux/dma-mapping.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/proc-fns.h> #include <asm/mach/arch.h> @@ -46,7 +47,6 @@ #include <plat/pwm-core.h> #include <plat/tv-core.h> #include <plat/spi-core.h> -#include <plat/regs-serial.h> #include "common.h" diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 80c21996c943..30b511a580aa 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -12,8 +12,8 @@ /* pull in the relevant register and map files. */ +#include <linux/serial_s3c.h> #include <mach/map.h> -#include <plat/regs-serial.h> /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h deleted file mode 100644 index 73dc85496a83..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * S5PV210 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index ad40ab0f5dbd..cc37edacda26 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -32,7 +33,6 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e5cd9fbf19e9..b41a38a75844 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -39,7 +40,6 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 7c0ed07a78a3..448e1d2eeed6 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/i2c.h> #include <linux/device.h> @@ -23,7 +24,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/ata-samsung_cf.h> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index f52cc15c2d85..2a6655fb63e7 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/device.h> #include <linux/dm9000.h> #include <linux/fb.h> @@ -32,7 +33,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/regs-srom.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 579afe89842a..157805529f26 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -22,7 +23,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h deleted file mode 100644 index 7a5d017b58b3..000000000000 --- a/arch/arm/mach-sa1100/include/mach/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/timex.h - * - * SA1100 architecture timex specifications - * - * Copyright (C) 1998 - */ - -/* - * SA1100 timer - */ -#define CLOCK_TICK_RATE 3686400 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 4852c08cb526..1dea6cfafb31 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -9,6 +9,7 @@ * */ #include <linux/init.h> +#include <linux/kernel.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,6 +21,9 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#define SA1100_CLOCK_FREQ 3686400 +#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ) + static u64 notrace sa1100_read_sched_clock(void) { return readl_relaxed(OSCR); @@ -93,7 +97,7 @@ static void sa1100_timer_resume(struct clock_event_device *cedev) /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ - writel_relaxed(OSMR0 - LATCH, OSCR); + writel_relaxed(OSMR0 - SA1100_LATCH, OSCR); } #else #define sa1100_timer_suspend NULL @@ -128,7 +132,7 @@ void __init sa1100_timer_init(void) setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, MIN_OSCR_DELTA * 2, 0x7fffffff); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3b8c87461d67..efd53848947d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -5,18 +5,13 @@ config ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select ARM_GIC - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select NO_IOPORT select PINCTRL select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP if ARCH_SHMOBILE_MULTI diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index f1fb89b76786..cabedebd7648 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -47,17 +47,10 @@ #define MD(nr) BIT(nr) -#define FRQMR IOMEM(0xffc80014) #define MSTPCR0 IOMEM(0xffc80030) #define MSTPCR1 IOMEM(0xffc80034) #define MSTPCR3 IOMEM(0xffc8003c) #define MSTPSR1 IOMEM(0xffc80044) -#define MSTPSR4 IOMEM(0xffc80048) -#define MSTPSR6 IOMEM(0xffc8004c) -#define MSTPCR4 IOMEM(0xffc80050) -#define MSTPCR5 IOMEM(0xffc80054) -#define MSTPCR6 IOMEM(0xffc80058) -#define MSTPCR7 IOMEM(0xffc80040) #define MODEMR 0xffcc0020 diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index e31980590eb4..cb8e32deb2a3 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -25,7 +25,6 @@ extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle); extern void shmobile_smp_apmu_cpu_die(unsigned int cpu); extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu); -extern void shmobile_invalidate_start(void); struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h deleted file mode 100644 index ae0d8d825c23..000000000000 --- a/arch/arm/mach-shmobile/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_MACH_TIMEX_H -#define __ASM_MACH_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */ - -#endif /* __ASM_MACH_TIMEX_H */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index c8f2a1a69a52..c71d667007b8 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -58,7 +58,7 @@ static void __init emev2_add_standard_devices_dt(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char *emev2_boards_compat_dt[] __initdata = { +static const char *emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, }; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index aee77f06f887..b5f8d75d51a0 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,17 +1,10 @@ config ARCH_SOCFPGA bool "Altera SOCFPGA family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MFD_SYSCON - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 308d5b5b3055..0786249b2832 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS if PLAT_SPEAR @@ -18,14 +16,10 @@ config ARCH_SPEAR13XX depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE select ARCH_HAS_CPUFREQ select ARM_GIC - select CPU_V7 select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL - select USE_OF help Supports for ARM's SPEAR13XX family @@ -50,9 +44,7 @@ config ARCH_SPEAR3XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T select PINCTRL - select USE_OF help Supports for ARM's SPEAR3XX family @@ -83,14 +75,12 @@ config ARCH_SPEAR6XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T help Supports for ARM's SPEAR6XX family config MACH_SPEAR600 def_bool y depends on ARCH_SPEAR6XX - select USE_OF help Supports ST SPEAr600 boards configured via the device-tree diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h deleted file mode 100644 index ef95e5b780bd..000000000000 --- a/arch/arm/mach-spear/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/timex.h - * - * SPEAr platform specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_TIMEX_H -#define __PLAT_TIMEX_H - -#define CLOCK_TICK_RATE 48000000 - -#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index d71654bc8d54..d2c13ba1190b 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,14 +1,10 @@ menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL select PINCTRL_ST select MFD_SYSCON - select MIGHT_HAVE_CACHE_L2X0 - select HAVE_SMP select HAVE_ARM_SCU if SMP select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b9d6cad8669b..9de27cfa688f 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -5,14 +5,9 @@ config ARCH_SUNXI select ARM_GIC select ARM_PSCI select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select HAVE_SMP select PINCTRL select PINCTRL_SUNXI select RESET_CONTROLLER - select SPARSE_IRQ select SUN4I_TIMER select SUN5I_HSTIMER diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 4926bd11f190..92d660f9610f 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -5,23 +5,15 @@ config ARCH_TEGRA select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS - select SPARSE_IRQ select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY - select USE_OF help This enables support for NVIDIA Tegra based systems. diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 8e23071bd1b3..e3a96d7302e9 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -3,20 +3,14 @@ config ARCH_U300 depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select ARM_PATCH_PHYS_VIRT select ARM_VIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select HAVE_TCM select PINCTRL select PINCTRL_COH901 select PINCTRL_U300 - select SPARSE_IRQ select MFD_SYSCON - select USE_OF help Support for ST-Ericsson U300 series mobile platforms. diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 0034d2cd6973..8052bd52450d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,13 +11,8 @@ config ARCH_U8500 select ARM_GIC select CACHE_L2X0 select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_ABX500 select PINCTRL_NOMADIK @@ -76,7 +71,6 @@ config UX500_AUTO_PLATFORM config MACH_UX500_DT bool "Generic U8500 support using device tree" depends on MACH_MOP500 - select USE_OF endmenu diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h deleted file mode 100644 index 426199b1add5..000000000000 --- a/arch/arm/mach-versatile/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/timex.h - * - * Versatile architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 4a70be485ff8..80b4be36f10a 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,16 +5,11 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select COMMON_CLK select COMMON_CLK_VERSATILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM - select HAVE_SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig deleted file mode 100644 index 081d46929436..000000000000 --- a/arch/arm/mach-virt/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config ARCH_VIRT - bool "Dummy Virtual Machine" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select ARM_PSCI - select HAVE_SMP - select CPU_V7 - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile deleted file mode 100644 index 7ddbfa60227f..000000000000 --- a/arch/arm/mach-virt/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := virt.o diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c deleted file mode 100644 index b184e57d1854..000000000000 --- a/arch/arm/mach-virt/virt.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Authors: Will Deacon <will.deacon@arm.com>, - * Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/smp.h> - -#include <asm/mach/arch.h> - -static void __init virt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *virt_dt_match[] = { - "linux,dummy-virt", - "xen,xenvm", - NULL -}; - -DT_MACHINE_START(VIRT, "Dummy Virtual Machine") - .init_machine = virt_init, - .dt_compat = virt_dt_match, -MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 927be93b692e..08f56a41cb55 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -3,8 +3,6 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CLKSRC_OF - select GENERIC_CLOCKEVENTS select VT8500_TIMER select PINCTRL help @@ -21,7 +19,6 @@ config ARCH_WM8750 bool "WonderMedia WM8750" depends on ARCH_MULTI_V6 select ARCH_VT8500 - select CPU_V6 help Support for WonderMedia WM8750 System-on-Chip. @@ -29,6 +26,5 @@ config ARCH_WM8850 bool "WonderMedia WM8850" depends on ARCH_MULTI_V7 select ARCH_VT8500 - select CPU_V7 help Support for WonderMedia WM8850 System-on-Chip. diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h deleted file mode 100644 index 164dce0b64db..000000000000 --- a/arch/arm/mach-w90x900/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/timex.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 15000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index f03e75bd0b2b..0e001a489a79 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -4,16 +4,9 @@ config ARCH_ZYNQ select ARM_GIC select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select HAVE_SMP - select SPARSE_IRQ select CADENCE_TTC_TIMER select ARM_GLOBAL_TIMER if !CPU_FREQ help diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h deleted file mode 100644 index e27d2daa7790..000000000000 --- a/arch/arm/plat-omap/include/plat/timex.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -#define CLOCK_TICK_RATE (HZ * 100000UL) - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 47c9fad43f00..ddfebddb4105 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -52,7 +52,7 @@ #include <plat/cpu.h> #include <linux/serial_core.h> -#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */ +#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */ /* clock information */ diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 46b426e8aff5..364963a0a344 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -28,13 +28,6 @@ unsigned int samsung_rev(void) } EXPORT_SYMBOL(samsung_rev); -void __init s3c24xx_init_cpu(void) -{ - /* nothing here yet */ - - samsung_cpu_rev = 0; -} - void __init s3c64xx_init_cpu(void) { samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index ac07e871f6a7..c64a39ac1b04 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> @@ -64,7 +65,6 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> -#include <plat/regs-serial.h> #include <plat/regs-spi.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -744,10 +744,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210() || - soc_is_exynos4212() || soc_is_exynos4412()) - pd->bus_num = 8; - else if (soc_is_s5pv210()) + if (soc_is_s5pv210()) pd->bus_num = 3; else pd->bus_num = 0; @@ -764,10 +761,7 @@ void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, { struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; - if (soc_is_exynos4210() || - soc_is_exynos4212() || soc_is_exynos4412()) - pd->hdmiphy_bus = 8; - else if (soc_is_s5pv210()) + if (soc_is_s5pv210()) pd->hdmiphy_bus = 3; else pd->hdmiphy_bus = 0; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 335beb341355..31164b34d4c4 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -199,7 +199,6 @@ extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); -extern void s3c24xx_init_cpu(void); extern void s3c64xx_init_cpu(void); extern void s5p_init_cpu(void __iomem *cpuid_addr); diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h deleted file mode 100644 index f05f2afa440d..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index f48dc0a4736c..61054fd88d43 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -29,7 +29,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ -#include <plat/regs-serial.h> +#include <linux/serial_s3c.h> /* working in physical space... */ #define S3C_WDOGREG(x) ((S3C_PA_WDT + (x))) diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index a30df396ca34..c32df1f202eb 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -33,8 +34,6 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <plat/regs-serial.h> - static struct cpu_table *cpu; static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index dd4c15d0d68f..da268813901b 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -196,8 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = { .resume = samsung_gpio_pm_2bit_resume, }; -#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \ - || defined(CONFIG_ARCH_EXYNOS) +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -307,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = { .save = samsung_gpio_pm_4bit_save, .resume = samsung_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** * samsung_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index e5b0f2c2d884..ae9baa2d6381 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -18,13 +18,12 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/cacheflush.h> #include <asm/suspend.h> -#include <plat/regs-serial.h> - #ifdef CONFIG_SAMSUNG_ATAGS #include <mach/hardware.h> #include <mach/map.h> diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c index 591498035916..52b16943617e 100644 --- a/arch/arm/plat-samsung/s5p-irq-pm.c +++ b/arch/arm/plat-samsung/s5p-irq-pm.c @@ -22,10 +22,7 @@ #include <mach/map.h> #include <mach/regs-gpio.h> - -#ifndef CONFIG_ARCH_EXYNOS #include <mach/regs-irq.h> -#endif /* state for IRQs over sleep */ @@ -43,18 +40,8 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state) unsigned long irqbit; unsigned int irq_rtc_tic, irq_rtc_alarm; -#ifdef CONFIG_ARCH_EXYNOS - if (soc_is_exynos5250()) { - irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC; - irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM; - } else { - irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC; - irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM; - } -#else irq_rtc_tic = IRQ_RTC_TIC; irq_rtc_alarm = IRQ_RTC_ALARM; -#endif if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) { irqbit = 1 << (data->irq + 1 - irq_rtc_alarm); |