diff options
Diffstat (limited to 'arch')
416 files changed, 22609 insertions, 5117 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 95c1923ce6fa..0f89d87cb2a0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \ dtb-$(CONFIG_ARCH_EFM32) += \ efm32gg-dk3750.dtb dtb-$(CONFIG_ARCH_EXYNOS3) += \ + exynos3250-artik5-eval.dtb \ exynos3250-monk.dtb \ exynos3250-rinato.dtb dtb-$(CONFIG_ARCH_EXYNOS4) += \ @@ -158,9 +159,9 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += \ - k2hk-evm.dtb \ - k2l-evm.dtb \ - k2e-evm.dtb \ + keystone-k2hk-evm.dtb \ + keystone-k2l-evm.dtb \ + keystone-k2e-evm.dtb \ keystone-k2g-evm.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ @@ -177,6 +178,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ds109.dtb \ kirkwood-ds110jv10.dtb \ kirkwood-ds111.dtb \ + kirkwood-ds112.dtb \ kirkwood-ds209.dtb \ kirkwood-ds210.dtb \ kirkwood-ds212.dtb \ @@ -199,6 +201,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-linkstation-lswsxl.dtb \ kirkwood-linkstation-lswvl.dtb \ kirkwood-linkstation-lswxl.dtb \ + kirkwood-linksys-viper.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ @@ -214,6 +217,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-nsa320.dtb \ kirkwood-nsa325.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ @@ -241,7 +245,8 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \ lpc4350-hitex-eval.dtb \ lpc4357-ea4357-devkit.dtb dtb-$(CONFIG_ARCH_LPC32XX) += \ - ea3250.dtb phy3250.dtb + lpc3250-ea3250.dtb \ + lpc3250-phy3250.dtb dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ @@ -253,6 +258,9 @@ dtb-$(CONFIG_ARCH_MMP) += \ dtb-$(CONFIG_MACH_MESON8B) += \ meson8b-mxq.dtb \ meson8b-odroidc1.dtb +dtb-$(CONFIG_ARCH_MPS2) += \ + mps2-an385.dtb \ + mps2-an399.dtb dtb-$(CONFIG_ARCH_MOXART) += \ moxart-uc7112lx.dtb dtb-$(CONFIG_SOC_IMX1) += \ @@ -320,8 +328,12 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ imx6dl-tx6dl-comtft.dtb \ + imx6dl-tx6s-8034.dtb \ + imx6dl-tx6s-8035.dtb \ imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-8033.dtb \ imx6dl-tx6u-811x.dtb \ + imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ @@ -346,6 +358,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-icore-rqs.dtb \ + imx6q-marsboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ imx6q-novena.dtb \ @@ -360,21 +373,30 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ + imx6q-tx6q-1036.dtb \ imx6q-tx6q-1110.dtb \ + imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ + imx6qp-nitrogen6_max.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ + imx6sx-sdb-sai.dtb \ imx6sx-sdb.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ - imx6ul-14x14-evk.dtb + imx6ul-14x14-evk.dtb \ + imx6ul-pico-hobbit.dtb \ + imx6ul-tx6ul-0010.dtb \ + imx6ul-tx6ul-0011.dtb \ + imx6ul-tx6ul-mainboard.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-sbc-imx7.dtb \ @@ -388,7 +410,8 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610m4-colibri.dtb \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ - vf610-twr.dtb + vf610-twr.dtb \ + vf610-zii-dev-rev-b.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -485,6 +508,8 @@ dtb-$(CONFIG_SOC_TI81XX) += \ dm8168-evm.dtb \ dra62x-j5eco-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ + am335x-baltos-ir2110.dtb \ + am335x-baltos-ir3220.dtb \ am335x-baltos-ir5221.dtb \ am335x-base0033.dtb \ am335x-bone.dtb \ @@ -494,6 +519,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-cm-t335.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ + am335x-icev2.dtb \ am335x-lxm.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ @@ -503,6 +529,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-wega-rdk.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ + omap4-kc1.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ @@ -526,9 +553,12 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ + am572x-idk.dtb \ dra7-evm.dtb \ - dra72-evm.dtb + dra72-evm.dtb \ + dra72-evm-revc.dtb dtb-$(CONFIG_ARCH_ORION5X) += \ + orion5x-kuroboxpro.dtb \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lsgl.dtb \ @@ -538,7 +568,10 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb +dtb-$(CONFIG_ARCH_OXNAS) += \ + wd-mbwe.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-arrow-db600c.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ @@ -546,13 +579,20 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ - arm-realview-pb11mp.dtb + arm-realview-pb11mp.dtb \ + arm-realview-eb.dtb \ + arm-realview-eb-11mp.dtb \ + arm-realview-eb-11mp-revb.dtb \ + arm-realview-eb-a9mp.dtb \ + arm-realview-pba8.dtb \ + arm-realview-pbx-a9.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-evb.dtb \ rk3036-kylin.dtb \ @@ -565,6 +605,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ + rk3288-miqi.dtb \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ @@ -608,6 +649,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ + socfpga_cyclone5_vining_fpga.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += \ spear1310-evb.dtb \ @@ -637,6 +679,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-ba10-tvbox.dtb \ sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-dserve-dsrv9703c.dtb \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ @@ -660,6 +703,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a10s-wobo-i5.dtb \ + sun5i-a13-difrnce-dit4350.dtb \ sun5i-a13-empire-electronix-d709.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ @@ -675,6 +719,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ + sun6i-a31s-colorfly-e708-q1.dtb \ sun6i-a31s-cs908.dtb \ sun6i-a31s-primo81.dtb \ sun6i-a31s-sina31s.dtb \ @@ -707,6 +752,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-polaroid-mid2809pxe04.dtb \ sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ @@ -715,6 +761,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h3-orangepi-2.dtb \ + sun8i-h3-orangepi-one.dtb \ + sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -839,6 +888,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb +dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ + aspeed-ast2500-evb.dtb endif dtstree := $(srctree)/$(src) diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts new file mode 100644 index 000000000000..a9a97307d66c --- /dev/null +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" + +/ { + model = "OnRISC Baltos iR 2110"; +}; + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <7>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <2>; +}; + +&phy_sel { + rmii-clock-ext = <1>; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts new file mode 100644 index 000000000000..fe002a17c04b --- /dev/null +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" + +/ { + model = "OnRISC Baltos iR 3220"; +}; + +&am33xx_pinmux { + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&i2c1 { + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <7>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <2>; +}; + +&phy_sel { + rmii-clock-ext = <1>; +}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 4e28d87e9356..d0faa7b8c5da 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -13,83 +13,19 @@ /dts-v1/; -#include "am33xx.dtsi" -#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "am335x-baltos.dtsi" / { model = "OnRISC Baltos iR 5221"; - compatible = "vscom,onrisc", "ti,am33xx"; - - cpus { - cpu@0 { - cpu0-supply = <&vdd1_reg>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - vbat: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - }; - - wl12xx_vmmc: fixedregulator@2 { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_gpio>; - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 8 0>; - startup-delay-us = <70000>; - enable-active-high; - }; }; &am33xx_pinmux { - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ - AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ - >; - }; - - wl12xx_gpio: pinmux_wl12xx_gpio { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ - >; - }; - - tps65910_pins: pinmux_tps65910_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ - >; - }; - tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ - AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ - >; - }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < @@ -98,19 +34,12 @@ >; }; - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ @@ -122,8 +51,8 @@ pinctrl-single,pins = < AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */ - AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ @@ -133,151 +62,6 @@ >; }; - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ - - - /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) - - /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - nandflash_pins_s0: nandflash_pins_s0 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ - >; - }; -}; - -&elm { - status = "okay"; -}; - -&gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&nandflash_pins_s0>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ - status = "okay"; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - nand-bus-width = <8>; - ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; - - gpmc,device-nand = "true"; - gpmc,device-width = <1>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - elm_id = <&elm>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; }; &uart1 { @@ -287,8 +71,6 @@ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -300,35 +82,11 @@ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio1>; - interrupts = <28 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&tps65910_pins>; - }; - - at24@50 { - compatible = "at24,24c02"; - pagesize = <8>; - reg = <0x50>; - }; - tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -341,14 +99,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - &usb0_phy { status = "okay"; }; @@ -367,108 +117,6 @@ dr_mode = "otg"; }; -&cppi41dma { - status = "okay"; -}; - -#include "tps65910.dtsi" - -&tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; - - ti,en-ck32k-xtal = <1>; - - regulators { - vrtc_reg: regulator@0 { - regulator-always-on; - }; - - vio_reg: regulator@1 { - regulator-always-on; - }; - - vdd1_reg: regulator@2 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; - regulator-boot-on; - regulator-always-on; - }; - - vdd2_reg: regulator@3 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - vdd3_reg: regulator@4 { - regulator-always-on; - }; - - vdig1_reg: regulator@5 { - regulator-always-on; - }; - - vdig2_reg: regulator@6 { - regulator-always-on; - }; - - vpll_reg: regulator@7 { - regulator-always-on; - }; - - vdac_reg: regulator@8 { - regulator-always-on; - }; - - vaux1_reg: regulator@9 { - regulator-always-on; - }; - - vaux2_reg: regulator@10 { - regulator-always-on; - }; - - vaux33_reg: regulator@11 { - regulator-always-on; - }; - - vmmc_reg: regulator@12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; -}; - -&mac { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; - - status = "okay"; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; - - status = "okay"; -}; - &cpsw_emac0 { phy-mode = "rmii"; dual_emac_res_vlan = <1>; @@ -488,42 +136,6 @@ rmii-clock-ext = <1>; }; -&mmc1 { - vmmc-supply = <&vmmc_reg>; - status = "okay"; -}; - -&mmc2 { - status = "okay"; - vmmc-supply = <&wl12xx_vmmc>; - ti,non-removable; - bus-width = <4>; - cap-power-off-card; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; - -&gpio0 { - ti,no-reset-on-init; -}; - &dcan1 { pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins>; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi new file mode 100644 index 000000000000..c8609d8d2c55 --- /dev/null +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -0,0 +1,408 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +#include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "vscom,onrisc", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + wl12xx_vmmc: fixedregulator@2 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 8 0>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ + AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ + AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ + AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + >; + }; + + tps65910_pins: pinmux_tps65910_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ + AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + + + /* Slave 2 */ + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + status = "okay"; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; + + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <28 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tps65910_pins>; + }; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <8>; + reg = <0x50>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&cppi41dma { + status = "okay"; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + ti,en-ck32k-xtal = <1>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <&vmmc_reg>; + status = "okay"; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wl12xx_vmmc>; + ti,non-removable; + bus-width = <4>; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 15d47ab28865..2a624b3c9258 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -35,6 +35,59 @@ }; &am33xx_pinmux { + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + usb1_drvvbus: usb1_drvvbus { pinctrl-single,pins = < AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ @@ -61,12 +114,34 @@ }; }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + &ldo4_reg { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; /* Ethernet */ +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rmii"; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 95461a28bc98..1d647358f1c1 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -35,59 +35,6 @@ >; }; - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) - /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - nandflash_pins: nandflash_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ @@ -109,13 +56,6 @@ }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -182,20 +122,8 @@ }; }; -/* Ethernet MAC */ -&mac { - slaves = <1>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; - status = "okay"; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; +&rtc { + system-power-controller; }; /* NAND Flash */ @@ -214,6 +142,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index e835644c5054..817b1dec0683 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -411,6 +411,7 @@ status = "okay"; interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 28b916210271..516673bb023d 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -524,6 +524,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts new file mode 100644 index 000000000000..e271013e78a6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -0,0 +1,306 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x ICE V2 board + * http://www.ti.com/tool/tmdsice3359 + */ + +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "TI AM3359 ICE-V2"; + compatible = "ti,am3359-icev2", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vtt_fixed: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + + leds@0 { + compatible = "gpio-leds"; + + led@0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + /* Tricolor status LEDs */ + leds@1 { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>; + + led@0 { + label = "status0:red:cpu0"; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + led@1 { + label = "status0:green:usr"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@2 { + label = "status0:yellow:usr"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@3 { + label = "status1:red:mmc0"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + + led@4 { + label = "status1:green:usr"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "status1:yellow:usr"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + user_leds: user_leds { + pinctrl-single,pins = < + AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */ + AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */ + >; + }; + + mmc0_pins_default: mmc0_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */ + >; + }; + + i2c0_pins_default: i2c0_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ + AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + >; + }; + + spi0_pins_default: spi0_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + >; + }; + + uart3_pins_default: uart3_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + >; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_default>; + + status = "okay"; + clock-frequency = <400000>; + + tps: power-controller@2d { + reg = <0x2d>; + }; + + tpic2810: gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1326000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; +}; + +&gpio0 { + /* Do not idle the GPIO used for holding the VTT regulator */ + ti,no-reset-on-init; + ti,no-idle-on-init; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 6c3a9bf3638a..df63484ef9b3 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -135,6 +135,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-width = <1>; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index d4b7f3bd553f..86f773165d5c 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -171,6 +171,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-nand = "true"; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 865de8500f1c..837d5b80ea1d 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -138,7 +138,7 @@ &epwmss1 { status = "okay"; - ehrpwm1: ehrpwm@48302200 { + ehrpwm1: pwm@48302200 { pinctrl-names = "default"; pinctrl-0 = <&ehrpwm1_pins>; status = "okay"; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index afb4b3a7bab4..8d8319590cde 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck { + sys_clkin_ck: sys_clkin_ck@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; @@ -163,7 +163,7 @@ clock-frequency = <12000000>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@490 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; @@ -176,7 +176,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck { + dpll_core_m4_ck: dpll_core_m4_ck@480 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -185,7 +185,7 @@ ti,index-starts-at-one; }; - dpll_core_m5_ck: dpll_core_m5_ck { + dpll_core_m5_ck: dpll_core_m5_ck@484 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -194,7 +194,7 @@ ti,index-starts-at-one; }; - dpll_core_m6_ck: dpll_core_m6_ck { + dpll_core_m6_ck: dpll_core_m6_ck@4d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -203,14 +203,14 @@ ti,index-starts-at-one; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@488 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0488>, <0x0420>, <0x042c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -219,14 +219,14 @@ ti,index-starts-at-one; }; - dpll_ddr_ck: dpll_ddr_ck { + dpll_ddr_ck: dpll_ddr_ck@494 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0494>, <0x0434>, <0x0440>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck { + dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_ck>; @@ -243,14 +243,14 @@ clock-div = <2>; }; - dpll_disp_ck: dpll_disp_ck { + dpll_disp_ck: dpll_disp_ck@498 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0498>, <0x0448>, <0x0454>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck { + dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_disp_ck>; @@ -260,14 +260,14 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@48c { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-j-type-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x048c>, <0x0470>, <0x049c>; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@4ac { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -292,7 +292,7 @@ clock-div = <4>; }; - cefuse_fck: cefuse_fck { + cefuse_fck: cefuse_fck@a20 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_clkin_ck>; @@ -316,7 +316,7 @@ clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick { + clkdiv32k_ick: clkdiv32k_ick@14c { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ck>; @@ -332,14 +332,14 @@ clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk { + pruss_ocp_gclk: pruss_ocp_gclk@530 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; reg = <0x0530>; }; - mmu_fck: mmu_fck { + mmu_fck: mmu_fck@914 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_core_m4_ck>; @@ -347,56 +347,56 @@ reg = <0x0914>; }; - timer1_fck: timer1_fck { + timer1_fck: timer1_fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; - timer2_fck: timer2_fck { + timer2_fck: timer2_fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x0508>; }; - timer3_fck: timer3_fck { + timer3_fck: timer3_fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x050c>; }; - timer4_fck: timer4_fck { + timer4_fck: timer4_fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x0510>; }; - timer5_fck: timer5_fck { + timer5_fck: timer5_fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x0518>; }; - timer6_fck: timer6_fck { + timer6_fck: timer6_fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x051c>; }; - timer7_fck: timer7_fck { + timer7_fck: timer7_fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x0504>; }; - usbotg_fck: usbotg_fck { + usbotg_fck: usbotg_fck@47c { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_ck>; @@ -412,7 +412,7 @@ clock-div = <2>; }; - ieee5000_fck: ieee5000_fck { + ieee5000_fck: ieee5000_fck@e4 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_core_m4_div2_ck>; @@ -420,7 +420,7 @@ reg = <0x00e4>; }; - wdt1_fck: wdt1_fck { + wdt1_fck: wdt1_fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; @@ -483,21 +483,21 @@ clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; reg = <0x0520>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck { + gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>; reg = <0x053c>; }; - gpio0_dbclk: gpio0_dbclk { + gpio0_dbclk: gpio0_dbclk@408 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&gpio0_dbclk_mux_ck>; @@ -505,7 +505,7 @@ reg = <0x0408>; }; - gpio1_dbclk: gpio1_dbclk { + gpio1_dbclk: gpio1_dbclk@ac { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -513,7 +513,7 @@ reg = <0x00ac>; }; - gpio2_dbclk: gpio2_dbclk { + gpio2_dbclk: gpio2_dbclk@b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -521,7 +521,7 @@ reg = <0x00b0>; }; - gpio3_dbclk: gpio3_dbclk { + gpio3_dbclk: gpio3_dbclk@b4 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -529,7 +529,7 @@ reg = <0x00b4>; }; - lcd_gclk: lcd_gclk { + lcd_gclk: lcd_gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; @@ -545,7 +545,7 @@ clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck { + gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; @@ -553,7 +553,7 @@ reg = <0x052c>; }; - gfx_fck_div_ck: gfx_fck_div_ck { + gfx_fck_div_ck: gfx_fck_div_ck@52c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&gfx_fclk_clksel_ck>; @@ -561,14 +561,14 @@ ti,max-div = <2>; }; - sysclkout_pre_ck: sysclkout_pre_ck { + sysclkout_pre_ck: sysclkout_pre_ck@700 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; reg = <0x0700>; }; - clkout2_div_ck: clkout2_div_ck { + clkout2_div_ck: clkout2_div_ck@700 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sysclkout_pre_ck>; @@ -577,7 +577,7 @@ reg = <0x0700>; }; - dbg_sysclk_ck: dbg_sysclk_ck { + dbg_sysclk_ck: dbg_sysclk_ck@414 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_clkin_ck>; @@ -585,7 +585,7 @@ reg = <0x0414>; }; - dbg_clka_ck: dbg_clka_ck { + dbg_clka_ck: dbg_clka_ck@414 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_core_m4_ck>; @@ -593,7 +593,7 @@ reg = <0x0414>; }; - stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck { + stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@414 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; @@ -601,7 +601,7 @@ reg = <0x0414>; }; - trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck { + trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@414 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; @@ -609,7 +609,7 @@ reg = <0x0414>; }; - stm_clk_div_ck: stm_clk_div_ck { + stm_clk_div_ck: stm_clk_div_ck@414 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&stm_pmd_clock_mux_ck>; @@ -619,7 +619,7 @@ ti,index-power-of-two; }; - trace_clk_div_ck: trace_clk_div_ck { + trace_clk_div_ck: trace_clk_div_ck@414 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&trace_pmd_clk_mux_ck>; @@ -629,7 +629,7 @@ ti,index-power-of-two; }; - clkout2_ck: clkout2_ck { + clkout2_ck: clkout2_ck@700 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkout2_div_ck>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0467846b4cc3..52be48bbd2dd 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -688,7 +688,7 @@ status = "disabled"; }; - ehrpwm0: ehrpwm@48300200 { + ehrpwm0: pwm@48300200 { compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; @@ -718,7 +718,7 @@ status = "disabled"; }; - ehrpwm1: ehrpwm@48302200 { + ehrpwm1: pwm@48302200 { compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; @@ -748,7 +748,7 @@ status = "disabled"; }; - ehrpwm2: ehrpwm@48304200 { + ehrpwm2: pwm@48304200 { compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; @@ -868,6 +868,8 @@ #size-cells = <1>; interrupt-controller; #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index 18cc826e9db5..00dd1f091be5 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &scm_clocks { - emac_ick: emac_ick { + emac_ick: emac_ick@32c { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&ipss_ick>; @@ -16,7 +16,7 @@ ti,bit-shift = <1>; }; - emac_fck: emac_fck { + emac_fck: emac_fck@32c { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&rmii_ck>; @@ -24,7 +24,7 @@ ti,bit-shift = <9>; }; - vpfe_ick: vpfe_ick { + vpfe_ick: vpfe_ick@32c { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&ipss_ick>; @@ -32,7 +32,7 @@ ti,bit-shift = <2>; }; - vpfe_fck: vpfe_fck { + vpfe_fck: vpfe_fck@32c { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&pclk_ck>; @@ -40,7 +40,7 @@ ti,bit-shift = <10>; }; - hsotgusb_ick_am35xx: hsotgusb_ick_am35xx { + hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&ipss_ick>; @@ -48,7 +48,7 @@ ti,bit-shift = <0>; }; - hsotgusb_fck_am35xx: hsotgusb_fck_am35xx { + hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_ck>; @@ -56,7 +56,7 @@ ti,bit-shift = <8>; }; - hecc_ck: hecc_ck { + hecc_ck: hecc_ck@32c { #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&sys_ck>; @@ -65,7 +65,7 @@ }; }; &cm_clocks { - ipss_ick: ipss_ick { + ipss_ick: ipss_ick@a10 { #clock-cells = <0>; compatible = "ti,am35xx-interface-clock"; clocks = <&core_l3_ick>; @@ -85,7 +85,7 @@ clock-frequency = <27000000>; }; - uart4_ick_am35xx: uart4_ick_am35xx { + uart4_ick_am35xx: uart4_ick_am35xx@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -93,7 +93,7 @@ ti,bit-shift = <23>; }; - uart4_fck_am35xx: uart4_fck_am35xx { + uart4_fck_am35xx: uart4_fck_am35xx@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ba580a9da390..12fcde4d4d2e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -679,7 +679,7 @@ status = "disabled"; }; - ehrpwm0: ehrpwm@48300200 { + ehrpwm0: pwm@48300200 { compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; @@ -705,7 +705,7 @@ status = "disabled"; }; - ehrpwm1: ehrpwm@48302200 { + ehrpwm1: pwm@48302200 { compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; @@ -731,7 +731,7 @@ status = "disabled"; }; - ehrpwm2: ehrpwm@48304200 { + ehrpwm2: pwm@48304200 { compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; @@ -749,7 +749,7 @@ ti,hwmods = "epwmss3"; status = "disabled"; - ehrpwm3: ehrpwm@48306200 { + ehrpwm3: pwm@48306200 { compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48306200 0x80>; @@ -767,7 +767,7 @@ ti,hwmods = "epwmss4"; status = "disabled"; - ehrpwm4: ehrpwm@48308200 { + ehrpwm4: pwm@48308200 { compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48308200 0x80>; @@ -785,7 +785,7 @@ ti,hwmods = "epwmss5"; status = "disabled"; - ehrpwm5: ehrpwm@4830a200 { + ehrpwm5: pwm@4830a200 { compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x4830a200 0x80>; @@ -896,6 +896,8 @@ #size-cells = <1>; interrupt-controller; #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 8889be1ca1c3..5bcd3aa025bc 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -119,7 +119,7 @@ clock-frequency = <32768>; }; - sound0: sound@0 { + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "AM437x-GP-EVM"; simple-audio-card,widgets = @@ -817,6 +817,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index d5dd72047a7e..3549b8c9ac49 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -107,7 +107,7 @@ default-brightness-level = <8>; }; - sound0: sound@0 { + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "AM43-EPOS-EVM"; simple-audio-card,widgets = @@ -568,6 +568,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index a38af2bfbfcf..7630ba1d89e4 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck { + sys_clkin_ck: sys_clkin_ck@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; @@ -16,7 +16,7 @@ reg = <0x0040>; }; - crystal_freq_sel_ck: crystal_freq_sel_ck { + crystal_freq_sel_ck: crystal_freq_sel_ck@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; @@ -104,7 +104,7 @@ clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk { + ehrpwm0_tbclk: ehrpwm0_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4ls_gclk>; @@ -112,7 +112,7 @@ reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk { + ehrpwm1_tbclk: ehrpwm1_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4ls_gclk>; @@ -120,7 +120,7 @@ reg = <0x0664>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk { + ehrpwm2_tbclk: ehrpwm2_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4ls_gclk>; @@ -128,7 +128,7 @@ reg = <0x0664>; }; - ehrpwm3_tbclk: ehrpwm3_tbclk { + ehrpwm3_tbclk: ehrpwm3_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4ls_gclk>; @@ -136,7 +136,7 @@ reg = <0x0664>; }; - ehrpwm4_tbclk: ehrpwm4_tbclk { + ehrpwm4_tbclk: ehrpwm4_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4ls_gclk>; @@ -144,7 +144,7 @@ reg = <0x0664>; }; - ehrpwm5_tbclk: ehrpwm5_tbclk { + ehrpwm5_tbclk: ehrpwm5_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4ls_gclk>; @@ -195,7 +195,7 @@ clock-frequency = <26000000>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@2d20 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; @@ -208,7 +208,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck { + dpll_core_m4_ck: dpll_core_m4_ck@2d38 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -219,7 +219,7 @@ ti,invert-autoidle-bit; }; - dpll_core_m5_ck: dpll_core_m5_ck { + dpll_core_m5_ck: dpll_core_m5_ck@2d3c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -230,7 +230,7 @@ ti,invert-autoidle-bit; }; - dpll_core_m6_ck: dpll_core_m6_ck { + dpll_core_m6_ck: dpll_core_m6_ck@2d40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -241,14 +241,14 @@ ti,invert-autoidle-bit; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@2d60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d60>, <0x2d64>, <0x2d6c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -267,14 +267,14 @@ clock-div = <2>; }; - dpll_ddr_ck: dpll_ddr_ck { + dpll_ddr_ck: dpll_ddr_ck@2da0 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2da0>, <0x2da4>, <0x2dac>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck { + dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_ck>; @@ -285,14 +285,14 @@ ti,invert-autoidle-bit; }; - dpll_disp_ck: dpll_disp_ck { + dpll_disp_ck: dpll_disp_ck@2e20 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e20>, <0x2e24>, <0x2e2c>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck { + dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_disp_ck>; @@ -304,14 +304,14 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@2de0 { #clock-cells = <0>; compatible = "ti,am3-dpll-j-type-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2de0>, <0x2de4>, <0x2dec>; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@2df0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -354,7 +354,7 @@ clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick { + clkdiv32k_ick: clkdiv32k_ick@2a38 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ck>; @@ -370,7 +370,7 @@ clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk { + pruss_ocp_gclk: pruss_ocp_gclk@4248 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sysclk_div>, <&dpll_disp_m2_ck>; @@ -383,56 +383,56 @@ clock-frequency = <32768>; }; - timer1_fck: timer1_fck { + timer1_fck: timer1_fck@4200 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4200>; }; - timer2_fck: timer2_fck { + timer2_fck: timer2_fck@4204 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4204>; }; - timer3_fck: timer3_fck { + timer3_fck: timer3_fck@4208 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4208>; }; - timer4_fck: timer4_fck { + timer4_fck: timer4_fck@420c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x420c>; }; - timer5_fck: timer5_fck { + timer5_fck: timer5_fck@4210 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4210>; }; - timer6_fck: timer6_fck { + timer6_fck: timer6_fck@4214 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4214>; }; - timer7_fck: timer7_fck { + timer7_fck: timer7_fck@4218 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4218>; }; - wdt1_fck: wdt1_fck { + wdt1_fck: wdt1_fck@422c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; @@ -487,14 +487,14 @@ clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>; reg = <0x4238>; }; - dpll_clksel_mac_clk: dpll_clksel_mac_clk { + dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_m5_ck>; @@ -509,14 +509,14 @@ clock-frequency = <32768>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck { + gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>; reg = <0x4240>; }; - gpio0_dbclk: gpio0_dbclk { + gpio0_dbclk: gpio0_dbclk@2b68 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&gpio0_dbclk_mux_ck>; @@ -524,7 +524,7 @@ reg = <0x2b68>; }; - gpio1_dbclk: gpio1_dbclk { + gpio1_dbclk: gpio1_dbclk@8c78 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -532,7 +532,7 @@ reg = <0x8c78>; }; - gpio2_dbclk: gpio2_dbclk { + gpio2_dbclk: gpio2_dbclk@8c80 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -540,7 +540,7 @@ reg = <0x8c80>; }; - gpio3_dbclk: gpio3_dbclk { + gpio3_dbclk: gpio3_dbclk@8c88 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -548,7 +548,7 @@ reg = <0x8c88>; }; - gpio4_dbclk: gpio4_dbclk { + gpio4_dbclk: gpio4_dbclk@8c90 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -556,7 +556,7 @@ reg = <0x8c90>; }; - gpio5_dbclk: gpio5_dbclk { + gpio5_dbclk: gpio5_dbclk@8c98 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkdiv32k_ick>; @@ -572,7 +572,7 @@ clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck { + gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sysclk_div>, <&dpll_per_m2_ck>; @@ -580,7 +580,7 @@ reg = <0x423c>; }; - gfx_fck_div_ck: gfx_fck_div_ck { + gfx_fck_div_ck: gfx_fck_div_ck@423c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&gfx_fclk_clksel_ck>; @@ -588,7 +588,7 @@ ti,max-div = <2>; }; - disp_clk: disp_clk { + disp_clk: disp_clk@4244 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; @@ -596,14 +596,14 @@ ti,set-rate-parent; }; - dpll_extdev_ck: dpll_extdev_ck { + dpll_extdev_ck: dpll_extdev_ck@2e60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e60>, <0x2e64>, <0x2e6c>; }; - dpll_extdev_m2_ck: dpll_extdev_m2_ck { + dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_extdev_ck>; @@ -614,14 +614,14 @@ ti,invert-autoidle-bit; }; - mux_synctimer32k_ck: mux_synctimer32k_ck { + mux_synctimer32k_ck: mux_synctimer32k_ck@4230 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>; reg = <0x4230>; }; - synctimer_32kclk: synctimer_32kclk { + synctimer_32kclk: synctimer_32kclk@2a30 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&mux_synctimer32k_ck>; @@ -629,28 +629,28 @@ reg = <0x2a30>; }; - timer8_fck: timer8_fck { + timer8_fck: timer8_fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x421c>; }; - timer9_fck: timer9_fck { + timer9_fck: timer9_fck@4220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4220>; }; - timer10_fck: timer10_fck { + timer10_fck: timer10_fck@4224 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4224>; }; - timer11_fck: timer11_fck { + timer11_fck: timer11_fck@4228 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; @@ -679,7 +679,7 @@ clocks = <&dpll_ddr_ck>; }; - dpll_ddr_m4_ck: dpll_ddr_m4_ck { + dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_x2_ck>; @@ -690,7 +690,7 @@ ti,invert-autoidle-bit; }; - dpll_per_clkdcoldo: dpll_per_clkdcoldo { + dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; clocks = <&dpll_per_ck>; @@ -701,7 +701,7 @@ ti,invert-autoidle-bit; }; - dll_aging_clk_div: dll_aging_clk_div { + dll_aging_clk_div: dll_aging_clk_div@4250 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin_ck>; @@ -733,14 +733,14 @@ clock-div = <2>; }; - usbphy_32khz_clkmux: usbphy_32khz_clkmux { + usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; - usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k { + usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&usbphy_32khz_clkmux>; @@ -748,7 +748,7 @@ reg = <0x2a40>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&usbphy_32khz_clkmux>; @@ -756,7 +756,7 @@ reg = <0x2a48>; }; - usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m { + usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_clkdcoldo>; @@ -764,11 +764,65 @@ reg = <0x8a60>; }; - usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_clkdcoldo>; ti,bit-shift = <8>; reg = <0x8a68>; }; + + clkout1_osc_div_ck: clkout1_osc_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <20>; + ti,max-div = <4>; + reg = <0x4100>; + }; + + clkout1_src2_mux_ck: clkout1_src2_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>; + reg = <0x4100>; + }; + + clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4100>; + }; + + clkout1_src2_post_div_ck: clkout1_src2_post_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4100>; + }; + + clkout1_mux_ck: clkout1_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, + <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; + ti,bit-shift = <16>; + reg = <0x4100>; + }; + + clkout1_ck: clkout1_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout1_mux_ck>; + ti,bit-shift = <23>; + reg = <0x4100>; + }; }; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts new file mode 100644 index 000000000000..e3acb99703e1 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "dra74x.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-idk-common.dtsi" + +/ { + model = "TI AM5728 IDK"; + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", + "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + }; + + status-leds { + compatible = "gpio-leds"; + cpu0-led { + label = "status0:red:cpu0"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + usr0-led { + label = "status0:green:usr"; + gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat-led { + label = "status0:blue:heartbeat"; + gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + cpu1-led { + label = "status1:red:cpu1"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu1"; + }; + + usr1-led { + label = "status1:green:usr"; + gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + mmc0-led { + label = "status1:blue:mmc0"; + gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&v3_3d>; + vmmc_aux-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 0>; /* gpio 219 */ +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 4168eb9dd369..81d6c3033b51 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra74x.dtsi" +#include "am57xx-commercial-grade.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -144,7 +145,7 @@ }; }; - sound0: sound@0 { + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "BeagleBoard-X15"; simple-audio-card,widgets = @@ -166,8 +167,6 @@ sound0_master: simple-audio-card,codec { sound-dai = <&tlv320aic3104>; - assigned-clocks = <&clkoutmux2_clk_mux>; - assigned-clock-parents = <&sys_clk2_dclk_div>; clocks = <&clkout2_clk>; }; }; @@ -427,7 +426,7 @@ /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ regulator-name = "smps45"; regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; }; @@ -436,7 +435,7 @@ /* VDD_CORE */ regulator-name = "smps6"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1030000>; + regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; }; @@ -571,6 +570,9 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&clkout2_pins_default>; pinctrl-1 = <&clkout2_pins_sleep>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; + status = "okay"; adc-settle-ms = <40>; @@ -795,6 +797,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1 2 0 0 >; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &mailbox5 { diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 14f912a1b4fd..378b142ef88c 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -51,7 +51,7 @@ regulator-max-microvolt = <3300000>; }; - sound0: sound@0 { + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "CL-SOM-AM57x-Sound-Card"; simple-audio-card,format = "i2s"; diff --git a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi new file mode 100644 index 000000000000..c183654464e9 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi @@ -0,0 +1,23 @@ +&cpu_alert0 { + temperature = <80000>; /* milliCelsius */ +}; + +&cpu_crit { + temperature = <90000>; /* milliCelsius */ +}; + +&gpu_crit { + temperature = <90000>; /* milliCelsius */ +}; + +&core_crit { + temperature = <90000>; /* milliCelsius */ +}; + +&dspeve_crit { + temperature = <90000>; /* milliCelsius */ +}; + +&iva_crit { + temperature = <90000>; /* milliCelsius */ +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi new file mode 100644 index 000000000000..b01a5948cdd0 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-industrial-grade.dtsi" + +/ { + aliases { + rtc0 = &tps659038_rtc; + rtc1 = &rtc; + }; + + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "VMAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + v3_3d: fixedregulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "V3_3D"; + vin-supply = <&smps9_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vtt_fixed: fixedregulator-vtt { + /* TPS51200 */ + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + vin-supply = <&v3_3d>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH + &dra7_pmx_core 0x418>; + #interrupt-cells = <2>; + interrupt-controller; + ti,system-power-controller; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + regulators { + smps12_reg: smps12 { + /* VDD_MPU */ + vin-supply = <&vmain>; + regulator-name = "smps12"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_DDR EMIF1 EMIF2 */ + vin-supply = <&vmain>; + regulator-name = "smps3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE on AM572 */ + /* VDD_IVA + VDD_DSP on AM571 */ + vin-supply = <&vmain>; + regulator-name = "smps45"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_GPU */ + vin-supply = <&vmain>; + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDD_CORE */ + vin-supply = <&vmain>; + regulator-name = "smps7"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* 5728 - VDD_IVAHD */ + /* 5718 - N.C. test point */ + vin-supply = <&vmain>; + regulator-name = "smps8"; + }; + + smps9_reg: smps9 { + /* VDD_3_3D */ + vin-supply = <&vmain>; + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + /* VDDSHV8 - VSDMMC */ + /* NOTE: on rev 1.3a, data supply */ + vin-supply = <&vmain>; + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + /* VDDSH18V */ + vin-supply = <&vmain>; + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ + vin-supply = <&vmain>; + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ + vin-supply = <&vmain>; + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* LDO5-8 unused */ + + ldo9_reg: ldo9 { + /* VDD_RTC */ + vin-supply = <&vmain>; + regulator-name = "ldo9"; + regulator-min-microvolt = <840000>; + regulator-max-microvolt = <1160000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + vin-supply = <&vmain>; + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + vin-supply = <&vmain>; + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldortc_reg: ldortc { + /* VDDA_RTC */ + vin-supply = <&vmain>; + regulator-name = "ldortc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + regen1: regen1 { + /* VDD_3V3_ON */ + regulator-name = "regen1"; + regulator-boot-on; + regulator-always-on; + }; + + regen2: regen2 { + /* Needed for PMIC internal resource */ + regulator-name = "regen2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659038_rtc: tps659038_rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&tps659038>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +&uart3 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH + &dra7_pmx_core 0x248>; +}; + +&rtc { + status = "okay"; + ext-clk-src; +}; + +&mac { + status = "okay"; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + dr_mode = "host"; +}; + +&usb2 { + dr_mode = "otg"; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&v3_3d>; + bus-width = <8>; + ti,non-removable; + max-frequency = <96000000>; +}; diff --git a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi new file mode 100644 index 000000000000..70c8c4ba1933 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi @@ -0,0 +1,23 @@ +&cpu_alert0 { + temperature = <90000>; /* milliCelsius */ +}; + +&cpu_crit { + temperature = <105000>; /* milliCelsius */ +}; + +&gpu_crit { + temperature = <105000>; /* milliCelsius */ +}; + +&core_crit { + temperature = <105000>; /* milliCelsius */ +}; + +&dspeve_crit { + temperature = <105000>; /* milliCelsius */ +}; + +&iva_crit { + temperature = <105000>; /* milliCelsius */ +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts new file mode 100644 index 000000000000..e68527b0d552 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "arm-realview-eb-11mp.dts" + +/ { + model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B"; +}; + +/* + * The revision B has a distinctly different layout of the syscon, so + * append a specific compatible-string. + */ +&syscon { + compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd"; +}; + +&intc { + reg = <0x10101000 0x1000>, + <0x10100100 0x100>; +}; + +&L2 { + reg = <0x10102000 0x1000>; +}; + +&scu { + reg = <0x10100000 0x100>; +}; + +&twd_timer { + reg = <0x10100600 0x20>; +}; + +&twd_wdog { + reg = <0x10100620 0x20>; +}; + +/* + * On revision B, we cannot reach the secondary interrupt + * controller, as a result, some peripherals that are dependent + * on their IRQ cannot be reached, so disable them. + */ +&intc_second { + status = "disabled"; +}; + +&gpio0 { + status = "disabled"; +}; + +&gpio1 { + status = "disabled"; +}; + +&gpio2 { + status = "disabled"; +}; + +&serial2 { + status = "disabled"; +}; + +&serial3 { + status = "disabled"; +}; + +&ssp { + status = "disabled"; +}; + +&wdog { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts new file mode 100644 index 000000000000..87ff602a2a2d --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-eb-mp.dtsi" + +/ { + model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C"; + arm,hbi = <0x146>; + + /* + * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB. + * Reference: ARM DUI 0318F + * + * To run this machine with QEMU, specify the following: + * qemu-system-arm -M realview-eb-mpcore -smp cpus=4 + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + MP11_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <0>; + next-level-cache = <&L2>; + }; + + MP11_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <1>; + next-level-cache = <&L2>; + }; + + MP11_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <2>; + next-level-cache = <&L2>; + }; + + MP11_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; +}; + +&pmu { + interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts new file mode 100644 index 000000000000..967684b3636c --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts @@ -0,0 +1,70 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-eb-mp.dtsi" + +/ { + model = "ARM RealView EB Cortex A9 MPCore"; + + /* + * This is the Cortex A9 MPCore tile used with the + * RealView EB. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + A9_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + A9_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + A9_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + A9_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; +}; + +&pmu { + interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi new file mode 100644 index 000000000000..7b8d90b7aeea --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi @@ -0,0 +1,225 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "arm-realview-eb.dtsi" + +/* + * This is the common include file for all MPCore variants of the + * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B + * and Cortex-A9 MPCore. + */ +/ { + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-eb-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + /* Primary interrupt controller in the test chip */ + intc: interrupt-controller@1f000100 { + compatible = "arm,eb11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1f001000 0x1000>, + <0x1f000100 0x100>; + }; + + /* Secondary interrupt controller on the FPGA */ + intc_second: interrupt-controller@10040000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + L2: l2-cache { + compatible = "arm,l220-cache"; + reg = <0x1f002000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s), probably for safety + * since th outer sync operation can cause the + * cache to hang unless disabled. + */ + cache-size = <1048576>; // 1MB + cache-sets = <4096>; + cache-line-size = <32>; + arm,shared-override; + arm,parity-enable; + arm,outer-sync-disable; + }; + + scu: scu@1f000000 { + compatible = "arm,arm11mp-scu"; + reg = <0x1f000000 0x100>; + }; + + twd_timer: timer@1f000600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x1f000600 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 13 0xf04>; + }; + + twd_wdog: watchdog@1f000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0x1f000620 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 14 0xf04>; + }; + + /* PMU with one IRQ line per core */ + pmu: pmu@0 { + compatible = "arm,arm11mpcore-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; + +/* + * This adapts all the peripherals to the interrupt routing + * to the GIC on the core tile. + */ + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&charlcd { + interrupt-parent = <&intc>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +/* + * On revision A, these peripherals does not have their IRQ lines + * routed to the core tile, but they can be reached on the secondary + * GIC. + */ +&gpio0 { + interrupt-parent = <&intc_second>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc_second>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc_second>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc_second>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&serial3 { + interrupt-parent = <&intc_second>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&ssp { + interrupt-parent = <&intc_second>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&wdog { + interrupt-parent = <&intc_second>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts new file mode 100644 index 000000000000..15431077f00c --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb.dts @@ -0,0 +1,166 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "arm-realview-eb.dtsi" + +/ { + model = "ARM RealView Emulation Baseboard"; + compatible = "arm,realview-eb"; + arm,hbi = <0x140>; + + /* + * This is the core tile with the CPU and GIC etc for the + * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache + * or PMU. + * + * To run this machine with QEMU, specify the following: + * qemu-system-arm -M realview-eb + * Unless specified, QEMU will emulate an ARM926EJ-S core tile. + * Switches -cpu arm1136 or -cpu arm1176 emulates the other + * core tiles. + */ + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-eb-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + intc: interrupt-controller@10040000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + }; + }; +}; + +/* + * This adapts all the peripherals to the interrupt routing + * to the GIC on the core tile. + */ + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&charlcd { + interrupt-parent = <&intc>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi new file mode 100644 index 000000000000..1c6a040218e3 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -0,0 +1,453 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + compatible = "arm,realview-eb"; + + chosen { }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + wdogclk: wdogclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + flash0@40000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x40000000 0x04000000>; + bank-width = <4>; + }; + + flash1@44000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x44000000 0x04000000>; + bank-width = <4>; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet: ethernet@4e000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x4e000000 0x10000>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb: usb@4f000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x4f000000 0x20000>; + port1-otg; + }; + + /* These peripherals are inside the FPGA */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; + }; + + i2c: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + mmc: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + + kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + charlcd: fpga_charlcd: charlcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + serial0: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial1: serial@1000a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000a000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial2: serial@1000b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000b000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial3: serial@1000c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000c000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp: ssp@1000d000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1000d000 0x1000>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + wdog: watchdog@10010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x10010000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + timer01: timer@10011000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10011000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer23: timer@10012000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10012000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + gpio0: gpio@10013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10013000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + clcd: clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + clocks = <&oscclk0>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 652d85b28aaa..c789564f2803 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -394,6 +394,46 @@ reg = <0x10200000 0x4000>; bank-width = <1>; }; + + clcd@10112000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10112000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupt-names = "combined"; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&oscclk0>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; }; /* These peripherals are inside the FPGA rather than the DevChip */ diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 63d6a051839f..3944765ac4b0 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -627,16 +627,17 @@ }; }; + /* Standard 640x480 VGA timings */ panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; }; }; }; diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts new file mode 100644 index 000000000000..d3238c252b59 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pba8.dts @@ -0,0 +1,178 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-pbx.dtsi" + +/ { + model = "ARM RealView Platform Baseboard for Cortex-A8"; + compatible = "arm,realview-pba8"; + arm,hbi = <0x178>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + pmu: pmu@0 { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + }; + + /* Primary GIC PL390 interrupt controller in the test chip */ + intc: interrupt-controller@1e000000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1e001000 0x1000>, + <0x1e000000 0x100>; + }; +}; + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&soc { + compatible = "arm,realview-pba8-soc", "simple-bus"; +}; + +&syscon { + compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd"; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog0 { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog1 { + interrupt-parent = <&intc>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer45 { + interrupt-parent = <&intc>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer67 { + interrupt-parent = <&intc>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts new file mode 100644 index 000000000000..db808f92dd79 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-pbx.dtsi" + +/ { + /* + * This is the RealView Platform Baseboard Explore for Cortex-A9 + * (HBI0182 + HBI0183) as described in ARM DUI 0440B + */ + model = "ARM RealView Platform Baseboard Explore for Cortex-A9"; + arm,hbi = <0x182>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x1f002000 0x1000>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s). + */ + cache-size = <1048576>; // 1MB + cache-sets = <4096>; + cache-line-size = <32>; + arm,parity-disable; + arm,tag-latency = <1>; + arm,data-latency = <1 1>; + arm,dirty-latency = <1>; + }; + + scu: scu@1f000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1f000000 0x100>; + }; + + twd_timer: timer@1f000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1f000600 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 13 0xf04>; + }; + + twd_wdog: watchdog@1f000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x1f000620 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 14 0xf04>; + }; + + pmu: pmu@0 { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>, + <0 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU0>, <&CPU1>; + }; + + /* Primary GIC PL390 interrupt controller in the test chip */ + intc: interrupt-controller@1f000000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1f001000 0x1000>, + <0x1f000100 0x100>; + }; +}; + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog0 { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog1 { + interrupt-parent = <&intc>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer45 { + interrupt-parent = <&intc>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer67 { + interrupt-parent = <&intc>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi new file mode 100644 index 000000000000..aeb49c4bd773 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -0,0 +1,542 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + compatible = "arm,realview-pbx"; + + chosen { }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + refclk32khz: refclk32khz { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + wdogclk: wdogclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + flash0@40000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x40000000 0x04000000>; + bank-width = <4>; + }; + + flash1@44000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x44000000 0x04000000>; + bank-width = <4>; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet: ethernet@4e000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x4e000000 0x10000>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb: usb@4f000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x4f000000 0x20000>; + port1-otg; + }; + + soc: soc@0 { + compatible = "arm,realview-pbx-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + regmap = <&syscon>; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; + }; + + sp810_syscon0: sysctl@10001000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x10001000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk0", + "timerclk1", + "timerclk2", + "timerclk3"; + assigned-clocks = <&sp810_syscon0 0>, + <&sp810_syscon0 1>, + <&sp810_syscon0 2>, + <&sp810_syscon0 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + + i2c: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + serial0: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial1: serial@1000a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000a000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial2: serial@1000b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000b000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp: ssp@1000d000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1000d000 0x1000>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + wdog0: watchdog@1000f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x1000f000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + wdog1: watchdog@10010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x10010000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + timer01: timer@10011000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10011000 0x1000>; + clocks = <&sp810_syscon0 0>, + <&sp810_syscon0 1>, + <&pclk>; + clock-names = "timerclk0", + "timerclk1", + "apb_pclk"; + }; + + timer23: timer@10012000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10012000 0x1000>; + clocks = <&sp810_syscon0 2>, + <&sp810_syscon0 3>, + <&pclk>; + clock-names = "timerclk2", + "timerclk3", + "apb_pclk"; + }; + + gpio0: gpio@10013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10013000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + /* DVI serial bus control is at 10016000 */ + + rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + timer45: timer@10018000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10018000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timerclk4", "timerclk5", "apb_pclk"; + }; + + timer67: timer@10019000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10019000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timerclk6", "timerclk7", "apb_pclk"; + }; + + sp810_syscon1: sysctl@1001a000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x1001a000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk4", + "timerclk5", + "timerclk6", + "timerclk7"; + assigned-clocks = <&sp810_syscon1 0>, + <&sp810_syscon1 1>, + <&sp810_syscon1 2>, + <&sp810_syscon1 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + }; + + + /* These peripherals are inside the FPGA */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + mmc: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + serial3: serial@1000c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000c000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + }; + + /* These peripherals are inside the NEC ISSP */ + issp { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + clcd: clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + clocks = <&oscclk4>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 85d2c377c332..8450944b28e6 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -245,7 +245,7 @@ button@2 { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; @@ -260,7 +260,7 @@ }; sata { - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; @@ -313,7 +313,7 @@ &pinctrl { keys_pin: keys-pin { - marvell,pins = "mpp24", "mpp47"; + marvell,pins = "mpp24", "mpp29"; marvell,function = "gpio"; }; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index b89e6cf1271a..7a461541ce50 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -304,13 +304,13 @@ button@1 { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; button@2 { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi index b1ad7cf6ac02..16331aa79775 100644 --- a/arch/arm/boot/dts/armv7-m.dtsi +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -1,7 +1,7 @@ #include "skeleton.dtsi" / { - nvic: nv-interrupt-controller { + nvic: interrupt-controller@e000e100 { compatible = "arm,armv7m-nvic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 30430162b886..3fac4c4d0007 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -91,96 +91,32 @@ clock-frequency = <50000000>; }; - /* PLL1 is used by CPU and some peripherals */ - pll1_clk: pll1_clk@f8000000 { + eth_phy_ref_clk: eth_phy_ref_clk { #clock-cells = <0>; - compatible = "axis,artpec6-pll1-clock"; - reg = <0xf8000000 4>; - clocks = <&ext_clk>; - }; - - cpu_clk: cpu_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&pll1_clk>; - clock-output-names = "cpu_clk"; - }; - - cpu_clkdiv2: cpu_clkdiv2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&cpu_clk>; - }; - - cpu_clkdiv4: cpu_clkdiv4 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <4>; - clock-mult = <1>; - clocks = <&cpu_clk>; - }; - - apb_pclk: apb_pclk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <8>; - clock-mult = <1>; - clocks = <&cpu_clk>; - clock-output-names = "apb_pclk"; + compatible = "fixed-clock"; + clock-frequency = <125000000>; }; - /* PLL2 is used by a number of peripherals, including UDL */ - pll2: pll2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <24>; + clkctrl: clkctrl@0xf8000000 { + #clock-cells = <1>; + compatible = "axis,artpec6-clkctrl"; + reg = <0xf8000000 0x48>; clocks = <&ext_clk>; + clock-names = "sys_refclk"; }; - /* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */ - pll2div2: pll2div2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll2>; - }; - - pll2div12: pll2div12 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <12>; - clock-mult = <1>; - clocks = <&pll2>; - }; - - pll2div24: pll2div24 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <24>; - clock-mult = <1>; - clocks = <&pll2>; - clock-output-names = "uart_clk"; - }; - - gtimer@faf00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xfaf00200 0x20>; interrupts = <GIC_PPI 11 0xf01>; - clocks = <&cpu_clkdiv2>; + clocks = <&clkctrl 1>; }; timer@faf00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xfaf00600 0x20>; interrupts = <GIC_PPI 13 0xf04>; - clocks = <&cpu_clkdiv2>; + clocks = <&clkctrl 1>; status = "disabled"; }; @@ -220,7 +156,8 @@ ethernet: ethernet@f8010000 { clock-names = "phy_ref_clk", "apb_pclk"; - clocks = <&ext_clk>, <&apb_pclk>; + clocks = <ð_phy_ref_clk>, + <&clkctrl 4>; compatible = "snps,dwc-qos-ethernet-4.10"; interrupt-parent = <&intc>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -238,7 +175,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8036000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pll2div24>, <&apb_pclk>; + clocks = <&clkctrl 13>, + <&clkctrl 12>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; @@ -246,7 +184,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8037000 0x1000>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pll2div24>, <&apb_pclk>; + clocks = <&clkctrl 13>, + <&clkctrl 12>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; @@ -254,7 +193,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8038000 0x1000>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pll2div24>, <&apb_pclk>; + clocks = <&clkctrl 13>, + <&clkctrl 12>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; @@ -262,7 +202,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xf8039000 0x1000>; interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pll2div24>, <&apb_pclk>; + clocks = <&clkctrl 13>, + <&clkctrl 12>; clock-names = "uart_clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts new file mode 100644 index 000000000000..1b7a5ff0e533 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "AST2500 EVB"; + compatible = "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts new file mode 100644 index 000000000000..cc5fcf2940bf --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +#include "aspeed-g4.dtsi" + +/ { + model = "Palmetto BMC"; + compatible = "tyan,palmetto-bmc", "aspeed,ast2400"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,38400 earlyprintk"; + }; + + memory { + reg = <0x40000000 0x10000000>; + }; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi new file mode 100644 index 000000000000..22dee5937d5c --- /dev/null +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -0,0 +1,161 @@ +#include "skeleton.dtsi" + +/ { + model = "Aspeed BMC"; + compatible = "aspeed,ast2400"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&vic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + }; + }; + + clocks { + clk_clkin: clk_clkin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; + + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vic: interrupt-controller@1e6c0080 { + compatible = "aspeed,ast2400-vic"; + interrupt-controller; + #interrupt-cells = <1>; + valid-sources = <0xffffffff 0x0007ffff>; + reg = <0x1e6c0080 0x80>; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clk_hpll: clk_hpll@1e6e2070 { + #clock-cells = <0>; + compatible = "aspeed,g4-hpll-clock"; + reg = <0x1e6e2070 0x4>; + clocks = <&clk_clkin>; + }; + + clk_apb: clk_apb@1e6e2008 { + #clock-cells = <0>; + compatible = "aspeed,g4-apb-clock"; + reg = <0x1e6e2008 0x4>; + clocks = <&clk_hpll>; + }; + + clk_uart: clk_uart@1e6e2008 { + #clock-cells = <0>; + compatible = "aspeed,uart-clock"; + reg = <0x1e6e202c 0x4>; + }; + + sram@1e720000 { + compatible = "mmio-sram"; + reg = <0x1e720000 0x8000>; // 32K + }; + + timer: timer@1e782000 { + compatible = "aspeed,ast2400-timer"; + reg = <0x1e782000 0x90>; + // The moxart_timer driver registers only one + // interrupt and assumes it's for timer 1 + //interrupts = <16 17 18 35 36 37 38 39>; + interrupts = <16>; + clocks = <&clk_apb>; + }; + + wdt1: wdt@1e785000 { + compatible = "aspeed,wdt"; + reg = <0x1e785000 0x1c>; + interrupts = <27>; + }; + + wdt2: wdt@1e785020 { + compatible = "aspeed,wdt"; + reg = <0x1e785020 0x1c>; + interrupts = <27>; + clocks = <&clk_apb>; + status = "disabled"; + }; + + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x1000>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x1000>; + reg-shift = <2>; + interrupts = <32>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x1000>; + reg-shift = <2>; + interrupts = <33>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x1000>; + reg-shift = <2>; + interrupts = <34>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + current-speed = <38400>; + no-loopback-test; + status = "disabled"; + }; + + uart6: serial@1e787000 { + compatible = "ns16550a"; + reg = <0x1e787000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi new file mode 100644 index 000000000000..dd94d9361fda --- /dev/null +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -0,0 +1,170 @@ +#include "skeleton.dtsi" + +/ { + model = "Aspeed BMC"; + compatible = "aspeed,ast2500"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&vic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm1176jzf-s"; + device_type = "cpu"; + reg = <0>; + }; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vic: interrupt-controller@1e6c0080 { + compatible = "aspeed,ast2400-vic"; + interrupt-controller; + #interrupt-cells = <1>; + valid-sources = <0xfefff7ff 0x0807ffff>; + reg = <0x1e6c0080 0x80>; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clk_clkin: clk_clkin@1e6e2070 { + #clock-cells = <0>; + compatible = "aspeed,g5-clkin-clock"; + reg = <0x1e6e2070 0x04>; + }; + + clk_hpll: clk_hpll@1e6e2024 { + #clock-cells = <0>; + compatible = "aspeed,g5-hpll-clock"; + reg = <0x1e6e2024 0x4>; + clocks = <&clk_clkin>; + }; + + clk_ahb: clk_ahb@1e6e2070 { + #clock-cells = <0>; + compatible = "aspeed,g5-ahb-clock"; + reg = <0x1e6e2070 0x4>; + clocks = <&clk_hpll>; + }; + + clk_apb: clk_apb@1e6e2008 { + #clock-cells = <0>; + compatible = "aspeed,g5-apb-clock"; + reg = <0x1e6e2008 0x4>; + clocks = <&clk_hpll>; + }; + + clk_uart: clk_uart@1e6e2008 { + #clock-cells = <0>; + compatible = "aspeed,uart-clock"; + reg = <0x1e6e202c 0x4>; + }; + + sram@1e720000 { + compatible = "mmio-sram"; + reg = <0x1e720000 0x9000>; // 36K + }; + + timer: timer@1e782000 { + compatible = "aspeed,ast2400-timer"; + reg = <0x1e782000 0x90>; + // The moxart_timer driver registers only one + // interrupt and assumes it's for timer 1 + //interrupts = <16 17 18 35 36 37 38 39>; + interrupts = <16>; + clocks = <&clk_apb>; + }; + + wdt1: wdt@1e785000 { + compatible = "aspeed,wdt"; + reg = <0x1e785000 0x1c>; + interrupts = <27>; + }; + + wdt2: wdt@1e785020 { + compatible = "aspeed,wdt"; + reg = <0x1e785020 0x1c>; + interrupts = <27>; + status = "disabled"; + }; + + wdt3: wdt@1e785040 { + compatible = "aspeed,wdt"; + reg = <0x1e785074 0x1c>; + status = "disabled"; + }; + + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x1000>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x1000>; + reg-shift = <2>; + interrupts = <32>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x1000>; + reg-shift = <2>; + interrupts = <33>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x1000>; + reg-shift = <2>; + interrupts = <34>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + current-speed = <38400>; + no-loopback-test; + status = "disabled"; + }; + + uart6: serial@1e787000 { + compatible = "ns16550a"; + reg = <0x1e787000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 21c780fab761..eb4f1ac96271 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -234,6 +234,15 @@ }; }; + shdwc@f8048010 { + atmel,shdwc-debouncer = <976>; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; + }; + watchdog@f8048040 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 79aec55e1ebc..6a366ee952a8 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -118,7 +118,7 @@ ethernet-phy@1 { reg = <0x1>; - reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>; interrupt-parent = <&pioB>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; }; @@ -162,7 +162,7 @@ reg = <0x1>; interrupt-parent = <&pioB>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index af8b708ac312..8837b7e4292c 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -978,7 +978,7 @@ trng@fffcc000 { compatible = "atmel,at91sam9g45-trng"; - reg = <0xfffcc000 0x4000>; + reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&trng_clk>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 228614ffff44..35ff4e7a4aac 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -29,3 +29,7 @@ brcm,function = <BCM2835_FSEL_ALT0>; }; }; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index ddbbbbd42dda..306a84ee9898 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -22,3 +22,7 @@ brcm,function = <BCM2835_FSEL_ALT2>; }; }; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index ef5405025223..57d313b6afaf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -29,3 +29,7 @@ brcm,function = <BCM2835_FSEL_ALT0>; }; }; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 86f1f2f598a7..cf2774ec0834 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -22,3 +22,7 @@ brcm,function = <BCM2835_FSEL_ALT2>; }; }; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 4859e9d81b23..8b15f9c35643 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -16,3 +16,7 @@ &gpio { pinctrl-0 = <&gpioout &alt0 &alt3>; }; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 76bdbcafab18..caf2707680c1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -74,3 +74,12 @@ &usb { power-domains = <&power RPI_POWER_DOMAIN_USB>; }; + +&v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; +}; + +&hdmi { + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index b83b32639358..a78759e73710 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -3,6 +3,17 @@ / { compatible = "brcm,bcm2835"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm1176jzf-s"; + reg = <0x0>; + }; + }; + soc { ranges = <0x7e000000 0x20000000 0x02000000>; dma-ranges = <0x40000000 0x00000000 0x20000000>; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index ff946661bd13..c4743f42237b 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -33,3 +33,7 @@ brcm,function = <BCM2835_FSEL_ALT0>; }; }; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 8aaf193711bf..31cc2f2ef040 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -1,6 +1,7 @@ #include <dt-bindings/pinctrl/bcm2835.h> #include <dt-bindings/clock/bcm2835.h> #include <dt-bindings/clock/bcm2835-aux.h> +#include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between @@ -153,6 +154,18 @@ status = "disabled"; }; + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + + pixelvalve@7e207000 { + compatible = "brcm,bcm2835-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + aux: aux@0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; @@ -206,6 +219,12 @@ status = "disabled"; }; + hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + i2c1: i2c@7e804000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; @@ -226,11 +245,39 @@ status = "disabled"; }; + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + status = "disabled"; + }; + usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; }; + + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; }; clocks { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 42dcdfb769b2..5087aa81efb1 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -17,7 +17,7 @@ model = "Buffalo WZR-1750DHP (BCM4708)"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,115200 earlycon"; }; memory { @@ -139,3 +139,11 @@ &uart0 { status = "okay"; }; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index f18e80e0b61d..1c7e53d60aa4 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -17,7 +17,7 @@ model = "Luxul XWC-1000 (BCM4708)"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,115200 earlycon"; }; memory { @@ -59,3 +59,7 @@ &uart0 { status = "okay"; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index ca92bba6a8c5..1049ab108b32 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -17,24 +17,13 @@ model = "Netgear R6250 V1 (BCM4708)"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,115200 earlycon"; }; memory { reg = <0x00000000 0x08000000>; }; - axi@18000000 { - usb3@23000 { - reg = <0x00023000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - - vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; - }; - }; - leds { compatible = "gpio-leds"; @@ -97,3 +86,7 @@ &uart0 { status = "okay"; }; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 64a5e8ab65e0..8b0c440b2e71 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -17,7 +17,7 @@ model = "SmartRG SR400ac"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,115200 earlycon"; }; memory { @@ -122,3 +122,7 @@ &uart0 { status = "okay"; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 38f0c00d1aca..a9c8defed4d3 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -17,7 +17,7 @@ model = "Buffalo WZR-600DHP2 (BCM47081)"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,115200 earlycon"; }; memory { diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 2a92e8d5ab34..791d7225c733 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -126,3 +126,8 @@ }; }; }; + + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index b52927c94e35..ca181516c28a 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -106,3 +106,11 @@ }; }; }; + +&usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 6c83538bc2d7..ace38efd2db3 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -17,7 +17,7 @@ model = "D-Link DIR-885L"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,115200 earlycon"; }; memory { @@ -109,3 +109,7 @@ status = "okay"; clock-frequency = <125000000>; }; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 65a1309bd6e2..7d4d29bf0ed3 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -18,6 +18,10 @@ / { interrupt-parent = <&gic>; + chosen { + stdout-path = &uart0; + }; + chipcommonA { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; @@ -207,6 +211,34 @@ gpio-controller; #gpio-cells = <2>; }; + + usb2: usb2@21000 { + reg = <0x00021000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + }; + + usb3: usb3@23000 { + reg = <0x00023000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + }; + + spi@29000 { + reg = <0x00029000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + spi_nor: spi-nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + linux,part-probe = "ofpart", "bcm47xxpart"; + status = "disabled"; + }; + }; }; lcpll0: lcpll0@1800c100 { diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi index acd4fe1833f2..ce7fca76b0d6 100644 --- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi @@ -13,28 +13,28 @@ */ &adc { - ncp15wb473@3 { + thermistor3 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 3>; }; - ncp15wb473@4 { + thermistor4 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; }; - ncp15wb473@5 { + thermistor5 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 5>; }; - ncp15wb473@6 { + thermistor6 { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 645549e14237..14dff3e188ed 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -16,14 +16,20 @@ compatible = "enbw,cmc", "ti,da850"; model = "EnBW CMC"; - soc { - serial0: serial@1c42000 { + soc@1c00000 { + serial0: serial@42000 { status = "okay"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { status = "okay"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { + status = "okay"; + }; + mdio: mdio@224000 { + status = "okay"; + }; + eth0: ethernet@220000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index ef061e9a2315..1a15db8e376b 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -14,8 +14,8 @@ compatible = "ti,da850-evm", "ti,da850"; model = "DA850/AM1808/OMAP-L138 EVM"; - soc { - pmx_core: pinmux@1c14120 { + soc@1c00000 { + pmx_core: pinmux@14120 { status = "okay"; mcasp0_pins: pinmux_mcasp0_pins { @@ -30,19 +30,19 @@ >; }; }; - serial0: serial@1c42000 { + serial0: serial@42000 { status = "okay"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { status = "okay"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { status = "okay"; }; - rtc0: rtc@1c23000 { + rtc0: rtc@23000 { status = "okay"; }; - i2c0: i2c@1c22000 { + i2c0: i2c@22000 { status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; @@ -66,17 +66,17 @@ }; }; - wdt: wdt@1c21000 { + wdt: wdt@21000 { status = "okay"; }; - mmc0: mmc@1c40000 { + mmc0: mmc@40000 { max-frequency = <50000000>; bus-width = <4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; }; - spi1: spi@1f0e000 { + spi1: spi@30e000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; @@ -116,18 +116,18 @@ }; }; }; - mdio: mdio@1e24000 { + mdio: mdio@224000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; bus_freq = <2200000>; }; - eth0: ethernet@1e20000 { + eth0: ethernet@220000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mii_pins>; }; - gpio: gpio@1e26000 { + gpio: gpio@226000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 226cda76e77c..25f0f8e6dde5 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -15,15 +15,15 @@ #address-cells = <1>; #size-cells = <1>; ranges; - intc: interrupt-controller { + intc: interrupt-controller@fffee000 { compatible = "ti,cp-intc"; interrupt-controller; #interrupt-cells = <1>; - ti,intc-size = <100>; + ti,intc-size = <101>; reg = <0xfffee000 0x2000>; }; }; - soc { + soc@1c00000 { compatible = "simple-bus"; model = "da850"; #address-cells = <1>; @@ -31,7 +31,7 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; - pmx_core: pinmux@1c14120 { + pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; #address-cells = <1>; @@ -63,6 +63,12 @@ 0x10 0x00002200 0x0000ff00 >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,bits = < + /* I2C1_SDA, I2C1_SCL */ + 0x10 0x00440000 0x00ff0000 + >; + }; mmc0_pins: pinmux_mmc_pins { pinctrl-single,bits = < /* MMCSD0_DAT[3] MMCSD0_DAT[2] @@ -114,7 +120,19 @@ 0x4 0x00000004 0x0000000f >; }; - spi1_pins: pinmux_spi_pins { + spi0_pins: pinmux_spi0_pins { + pinctrl-single,bits = < + /* SIMO, SOMI, CLK */ + 0xc 0x00001101 0x0000ff0f + >; + }; + spi0_cs0_pin: pinmux_spi0_cs0 { + pinctrl-single,bits = < + /* CS0 */ + 0x10 0x00000010 0x000000f0 + >; + }; + spi1_pins: pinmux_spi1_pins { pinctrl-single,bits = < /* SIMO, SOMI, CLK */ 0x14 0x00110100 0x00ff0f00 @@ -150,7 +168,7 @@ }; }; - edma0: edma@01c00000 { + edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ reg = <0x0 0x8000>; @@ -161,19 +179,19 @@ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; }; - edma0_tptc0: tptc@01c08000 { + edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; }; - edma0_tptc1: tptc@01c08400 { + edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; }; - edma1: edma@01e30000 { + edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ reg = <0x230000 0x8000>; @@ -184,41 +202,41 @@ ti,tptcs = <&edma1_tptc0 7>; }; - edma1_tptc0: tptc@01e38000 { + edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; }; - serial0: serial@1c42000 { + serial0: serial@42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; reg-shift = <2>; interrupts = <25>; status = "disabled"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { compatible = "ns16550a"; reg = <0x10c000 0x100>; reg-shift = <2>; interrupts = <53>; status = "disabled"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { compatible = "ns16550a"; reg = <0x10d000 0x100>; reg-shift = <2>; interrupts = <61>; status = "disabled"; }; - rtc0: rtc@1c23000 { + rtc0: rtc@23000 { compatible = "ti,da830-rtc"; reg = <0x23000 0x1000>; interrupts = <19 19>; status = "disabled"; }; - i2c0: i2c@1c22000 { + i2c0: i2c@22000 { compatible = "ti,davinci-i2c"; reg = <0x22000 0x1000>; interrupts = <15>; @@ -226,12 +244,20 @@ #size-cells = <0>; status = "disabled"; }; - wdt: wdt@1c21000 { + i2c1: i2c@228000 { + compatible = "ti,davinci-i2c"; + reg = <0x228000 0x1000>; + interrupts = <51>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; status = "disabled"; }; - mmc0: mmc@1c40000 { + mmc0: mmc@40000 { compatible = "ti,da830-mmc"; reg = <0x40000 0x1000>; interrupts = <16>; @@ -239,7 +265,7 @@ dma-names = "rx", "tx"; status = "disabled"; }; - mmc1: mmc@1e1b000 { + mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; interrupts = <72>; @@ -247,37 +273,47 @@ dma-names = "rx", "tx"; status = "disabled"; }; - ehrpwm0: ehrpwm@01f00000 { + ehrpwm0: pwm@300000 { compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; status = "disabled"; }; - ehrpwm1: ehrpwm@01f02000 { + ehrpwm1: pwm@302000 { compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; status = "disabled"; }; - ecap0: ecap@01f06000 { + ecap0: ecap@306000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; status = "disabled"; }; - ecap1: ecap@01f07000 { + ecap1: ecap@307000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; status = "disabled"; }; - ecap2: ecap@01f08000 { + ecap2: ecap@308000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; status = "disabled"; }; - spi1: spi@1f0e000 { + spi0: spi@41000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,da830-spi"; + reg = <0x41000 0x1000>; + num-cs = <6>; + ti,davinci-spi-intr-line = <1>; + interrupts = <20>; + status = "disabled"; + }; + spi1: spi@30e000 { #address-cells = <1>; #size-cells = <0>; compatible = "ti,da830-spi"; @@ -289,13 +325,14 @@ dma-names = "rx", "tx"; status = "disabled"; }; - mdio: mdio@1e24000 { + mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; + status = "disabled"; }; - eth0: ethernet@1e20000 { + eth0: ethernet@220000 { compatible = "ti,davinci-dm6467-emac"; reg = <0x220000 0x4000>; ti,davinci-ctrl-reg-offset = <0x3000>; @@ -308,10 +345,12 @@ 35 36 >; + status = "disabled"; }; - gpio: gpio@1e26000 { + gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; + #gpio-cells = <2>; reg = <0x226000 0x1000>; interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH @@ -323,7 +362,7 @@ status = "disabled"; }; - mcasp0: mcasp@01d00000 { + mcasp0: mcasp@100000 { compatible = "ti,da830-mcasp-audio"; reg = <0x100000 0x2000>, <0x102000 0x400000>; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index 792a64ee0df7..c4671af0a28d 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -156,7 +156,7 @@ }; &pllss_clocks { - timer1_fck: timer1_fck { + timer1_fck: timer1_fck@2e0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck @@ -165,7 +165,7 @@ reg = <0x2e0>; }; - timer2_fck: timer2_fck { + timer2_fck: timer2_fck@2e0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck @@ -192,7 +192,7 @@ clock-frequency = <125000000>; }; - sysclk18_ck: sysclk18_ck { + sysclk18_ck: sysclk18_ck@2f0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&rtcosc_ck>, <&rtcdivider_ck>; @@ -202,7 +202,7 @@ }; &scm_clocks { - devosc_ck: devosc_ck { + devosc_ck: devosc_ck@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_20000000_ck>, <&virt_19200000_ck>; @@ -259,7 +259,7 @@ clock-div = <1>; }; - mpu_clksrc_ck: mpu_clksrc_ck { + mpu_clksrc_ck: mpu_clksrc_ck@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&devosc_ck>, <&rtcdivider_ck>; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 4a6ce8c8bf8f..d4537dc61497 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -568,6 +568,8 @@ #size-cells = <1>; interrupt-controller; #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; }; }; diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi index 50d9d338fbe9..51865eb84a80 100644 --- a/arch/arm/boot/dts/dm816x-clocks.dtsi +++ b/arch/arm/boot/dts/dm816x-clocks.dtsi @@ -86,7 +86,7 @@ /* 0x48180000 */ &prcm_clocks { - clkout_pre_ck: clkout_pre_ck { + clkout_pre_ck: clkout_pre_ck@100 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1 @@ -94,7 +94,7 @@ reg = <0x100>; }; - clkout_div_ck: clkout_div_ck { + clkout_div_ck: clkout_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&clkout_pre_ck>; @@ -103,7 +103,7 @@ reg = <0x100>; }; - clkout_ck: clkout_ck { + clkout_ck: clkout_ck@100 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkout_div_ck>; @@ -112,7 +112,7 @@ }; /* CM_DPLL clocks p1795 */ - sysclk1_ck: sysclk1_ck { + sysclk1_ck: sysclk1_ck@300 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&main_fapll 1>; @@ -120,7 +120,7 @@ reg = <0x0300>; }; - sysclk2_ck: sysclk2_ck { + sysclk2_ck: sysclk2_ck@304 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&main_fapll 2>; @@ -128,7 +128,7 @@ reg = <0x0304>; }; - sysclk3_ck: sysclk3_ck { + sysclk3_ck: sysclk3_ck@308 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&main_fapll 3>; @@ -136,7 +136,7 @@ reg = <0x0308>; }; - sysclk4_ck: sysclk4_ck { + sysclk4_ck: sysclk4_ck@30c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&main_fapll 4>; @@ -144,7 +144,7 @@ reg = <0x030c>; }; - sysclk5_ck: sysclk5_ck { + sysclk5_ck: sysclk5_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sysclk4_ck>; @@ -152,7 +152,7 @@ reg = <0x0310>; }; - sysclk6_ck: sysclk6_ck { + sysclk6_ck: sysclk6_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&main_fapll 4>; @@ -160,7 +160,7 @@ reg = <0x0314>; }; - sysclk10_ck: sysclk10_ck { + sysclk10_ck: sysclk10_ck@324 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&ddr_fapll 2>; @@ -168,7 +168,7 @@ reg = <0x0324>; }; - sysclk24_ck: sysclk24_ck { + sysclk24_ck: sysclk24_ck@3b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&main_fapll 5>; @@ -176,7 +176,7 @@ reg = <0x03b4>; }; - mpu_ck: mpu_ck { + mpu_ck: mpu_ck@15dc { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sysclk2_ck>; @@ -184,7 +184,7 @@ reg = <0x15dc>; }; - audio_pll_a_ck: audio_pll_a_ck { + audio_pll_a_ck: audio_pll_a_ck@35c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&audio_fapll 1>; @@ -192,56 +192,56 @@ reg = <0x035c>; }; - sysclk18_ck: sysclk18_ck { + sysclk18_ck: sysclk18_ck@378 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_32k_ck>, <&audio_pll_a_ck>; reg = <0x0378>; }; - timer1_fck: timer1_fck { + timer1_fck: timer1_fck@390 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; reg = <0x0390>; }; - timer2_fck: timer2_fck { + timer2_fck: timer2_fck@394 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; reg = <0x0394>; }; - timer3_fck: timer3_fck { + timer3_fck: timer3_fck@398 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; reg = <0x0398>; }; - timer4_fck: timer4_fck { + timer4_fck: timer4_fck@39c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; reg = <0x039c>; }; - timer5_fck: timer5_fck { + timer5_fck: timer5_fck@3a0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; reg = <0x03a0>; }; - timer6_fck: timer6_fck { + timer6_fck: timer6_fck@3a4 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; reg = <0x03a4>; }; - timer7_fck: timer7_fck { + timer7_fck: timer7_fck@3a8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d9309a016117..44e39c743b53 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -185,6 +185,8 @@ gpmc,num-waitpins = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; i2c1: i2c@48028000 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index d9b87236019d..bafcfac067ec 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -33,6 +33,7 @@ evm_3v3_sw: fixedregulator-evm_3v3_sw { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sw"; + vin-supply = <&sysen1>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -64,10 +65,11 @@ regulator-always-on; regulator-boot-on; enable-active-high; + vin-supply = <&sysen2>; gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; - sound0: sound@0 { + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "DRA7xx-EVM"; simple-audio-card,widgets = @@ -224,21 +226,6 @@ >; }; - qspi1_pins: pinmux_qspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ - DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ - DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ - DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ - DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ - DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ - DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ - DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ - DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ - DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ - >; - }; - usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ @@ -254,8 +241,9 @@ nand_flash_x16: nand_flash_x16 { /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch * So NAND flash requires following switch settings: - * SW5.9 (GPMC_WPN) = LOW - * SW5.1 (NAND_BOOTn) = HIGH */ + * SW5.1 (NAND_BOOTn) = ON (LOW) + * SW5.9 (GPMC_WPN) = OFF (HIGH) + */ pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ @@ -428,7 +416,7 @@ /* VDD_DSPEVE */ regulator-name = "smps45"; regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; }; @@ -446,7 +434,7 @@ /* CORE_VDD */ regulator-name = "smps7"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1060000>; + regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; }; @@ -523,12 +511,37 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; }; + + /* REGEN1 is unused */ + + regen2: regen2 { + /* Needed for PMIC internal resources */ + regulator-name = "regen2"; + regulator-boot-on; + regulator-always-on; + }; + + /* REGEN3 is unused */ + + sysen1: sysen1 { + /* PMIC_REGEN_3V3 */ + regulator-name = "sysen1"; + regulator-boot-on; + regulator-always-on; + }; + + sysen2: sysen2 { + /* PMIC_REGEN_DDR */ + regulator-name = "sysen2"; + regulator-boot-on; + regulator-always-on; + }; }; }; }; pcf_lcd: gpio@20 { - compatible = "nxp,pcf8575"; + compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; @@ -539,7 +552,7 @@ }; pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575"; + compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -573,7 +586,7 @@ clock-frequency = <400000>; pcf_hdmi: gpio@26 { - compatible = "nxp,pcf8575"; + compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; @@ -650,18 +663,14 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi1_pins>; - spi-max-frequency = <48000000>; + spi-max-frequency = <64000000>; m25p80@0 { compatible = "s25fl256s1"; - spi-max-frequency = <48000000>; + spi-max-frequency = <64000000>; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; - spi-cpol; - spi-cpha; #address-cells = <1>; #size-cells = <1>; @@ -748,6 +757,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -904,6 +914,8 @@ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1 2 0 0 >; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &mailbox5 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 13ac88279427..e0074014385a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -123,7 +123,7 @@ #size-cells = <1>; ranges = <0 0x0 0x1400>; - pbias_regulator: pbias_regulator { + pbias_regulator: pbias_regulator@e00 { compatible = "ti,pbias-dra7", "ti,pbias-omap"; reg = <0xe00 0x4>; syscon = <&scm_conf>; @@ -161,6 +161,24 @@ compatible = "syscon"; reg = <0x1c24 0x0024>; }; + + sdma_xbar: dma-router@b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xb78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + + edma_xbar: dma-router@c78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xc78 0x7c>; + #dma-cells = <2>; + dma-requests = <204>; + ti,dma-safe-map = <0>; + dma-masters = <&edma>; + }; }; cm_core_aon: cm_core_aon@5000 { @@ -315,13 +333,43 @@ dma-requests = <127>; }; - sdma_xbar: dma-router@4a002b78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0x4a002b78 0xfc>; - #dma-cells = <1>; - dma-requests = <205>; - ti,dma-safe-map = <0>; - dma-masters = <&sdma>; + edma: edma@43300000 { + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x43300000 0x100000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <20 21>; + * for example. Note that these channels need to be + * masked in the xbar as well. + */ + }; + + edma_tptc0: tptc@43400000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x43400000 0x100000>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc1: tptc@43500000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x43500000 0x100000>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; }; gpio1: gpio@4ae10000 { @@ -773,12 +821,20 @@ ti,hwmods = "timer11"; }; + timer12: timer@4ae20000 { + compatible = "ti,omap5430-timer"; + reg = <0x4ae20000 0x80>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; + timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer13"; - status = "disabled"; }; timer14: timer@4882a000 { @@ -786,7 +842,6 @@ reg = <0x4882a000 0x80>; interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer14"; - status = "disabled"; }; timer15: timer@4882c000 { @@ -794,7 +849,6 @@ reg = <0x4882c000 0x80>; interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer15"; - status = "disabled"; }; timer16: timer@4882e000 { @@ -802,7 +856,6 @@ reg = <0x4882e000 0x80>; interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer16"; - status = "disabled"; }; wdt2: wdt@4ae14000 { @@ -1404,6 +1457,8 @@ #size-cells = <1>; interrupt-controller; #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; status = "disabled"; }; @@ -1418,21 +1473,136 @@ status = "disabled"; }; + mcasp1: mcasp@48460000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x48460000 0x2000>, + <0x45800000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>, + <&mcasp1_ahclkr_mux>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + + mcasp2: mcasp@48464000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp2"; + reg = <0x48464000 0x2000>, + <0x45c00000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>, + <&mcasp2_ahclkr_mux>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + mcasp3: mcasp@48468000 { compatible = "ti,dra7-mcasp-audio"; ti,hwmods = "mcasp3"; - reg = <0x48468000 0x2000>; - reg-names = "mpu"; + reg = <0x48468000 0x2000>, + <0x46000000 0x1000>; + reg-names = "mpu","dat"; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; - dmas = <&sdma_xbar 133>, <&sdma_xbar 132>; + dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>; clock-names = "fck", "ahclkx"; status = "disabled"; }; + mcasp4: mcasp@4846c000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp4"; + reg = <0x4846c000 0x2000>, + <0x48436000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp5: mcasp@48470000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp5"; + reg = <0x48470000 0x2000>, + <0x4843a000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp6: mcasp@48474000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp6"; + reg = <0x48474000 0x2000>, + <0x4844c000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp7: mcasp@48478000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp7"; + reg = <0x48478000 0x2000>, + <0x48450000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + + mcasp8: mcasp@4847c000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp8"; + reg = <0x4847c000 0x2000>, + <0x48454000 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; + dma-names = "tx", "rx"; + clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi new file mode 100644 index 000000000000..093538ea5b5f --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -0,0 +1,817 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> + +/ { + compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; + + aliases { + display0 = &hdmi0; + }; + + evm_3v3: fixedregulator-evm_3v3 { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + evm_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ + <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; +}; + +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + + nand_default: nand_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ + DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ + DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + >; + }; + + tps65917_pins_default: tps65917_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + >; + }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ + >; + }; + + hdmi_pins: pinmux_hdmi_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ + >; + }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15) + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps65917_pins_default>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + tps65917_regulators: regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; + }; + + pcf_gpio_21: gpio@21 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x21>; + lines-initial-states = <0x1408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3>; + IOVDD-supply = <&evm_3v3>; + DRVDD-supply = <&evm_3v3>; + DVDD-supply = <&aic_dvdd>; + }; +}; + +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + + pcf_hdmi: pcf8575@26 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + /* + * initial state is used here to keep the mdio interface + * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and + * VIN2_S0 driven high otherwise Ethernet stops working + * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 + */ + lines-initial-states = <0x0f2b>; + + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; +}; + +&uart1 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_default>; + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + /* To use NAND, DIP switch SW5 must be set like so: + * SW5.1 (NAND_SELn) = ON (LOW) + * SW5.9 (GPMC_WPN) = OFF (HIGH) + */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <80>; + gpmc,cs-wr-off-ns = <80>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <60>; + gpmc,adv-wr-off-ns = <60>; + gpmc,we-on-ns = <10>; + gpmc,we-off-ns = <50>; + gpmc,oe-on-ns = <4>; + gpmc,oe-off-ns = <40>; + gpmc,access-ns = <40>; + gpmc,wr-access-ns = <80>; + gpmc,rd-cycle-ns = <80>; + gpmc,wr-cycle-ns = <80>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000c0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001c0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x001e0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x0f600000>; + }; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + vmmc-supply = <&evm_3v3_sd>; + vmmc_aux-supply = <&ldo1_reg>; + bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is a viable alternative + */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + max-frequency = <192000000>; +}; + +&mmc2 { + /* SW5-3 in ON position */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&evm_3v3>; + bus-width = <8>; + ti,non-removable; + max-frequency = <192000000>; +}; + +&dra7_pmx_core { + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 2 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 2 */ + DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ + DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) + >; + }; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + +&dcan1 { + status = "ok"; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; + pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; +}; + +&qspi { + status = "okay"; + + spi-max-frequency = <64000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <64000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldo5_reg>; +}; + +&hdmi { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts new file mode 100644 index 000000000000..f9cfd3bb4dc2 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "dra72-evm-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "TI DRA722 Rev C EVM"; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ + }; +}; + +&tps65917_regulators { + ldo2_reg: ldo2 { + /* LDO2_OUT --> VDDA_1V8_PHY2 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hdmi { + vdda-supply = <&ldo2_reg>; +}; + +&pcf_gpio_21 { + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; +}; + +&mac { + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, + <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ + <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + dp83867_0: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + dp83867_1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; +}; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6affe2d137da..cc1d32ca4a8a 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -1,694 +1,40 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; - -#include "dra72x.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/ti-dra7-atl.h> - +#include "dra72-evm-common.dtsi" / { model = "TI DRA722"; - compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; +}; - aliases { - display0 = &hdmi0; - }; - - evm_3v3: fixedregulator-evm_3v3 { - compatible = "regulator-fixed"; - regulator-name = "evm_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - aic_dvdd: fixedregulator-aic_dvdd { - /* TPS77018DBVT */ - compatible = "regulator-fixed"; - regulator-name = "aic_dvdd"; - vin-supply = <&evm_3v3>; +&tps65917_regulators { + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - evm_3v3_sd: fixedregulator-sd { - compatible = "regulator-fixed"; - regulator-name = "evm_3v3_sd"; - regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; - }; - - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; - }; - - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - tpd12s015: encoder { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ - <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ - <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - sound0: sound@0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "DRA7xx-EVM"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line Out", - "Microphone", "Mic Jack", - "Line", "Line In"; - simple-audio-card,routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC3L", "Mic Jack", - "MIC3R", "Mic Jack", - "Mic Jack", "Mic Bias", - "LINE1L", "Line In", - "LINE1R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - sound0_master: simple-audio-card,cpu { - sound-dai = <&mcasp3>; - system-clock-frequency = <5644800>; - }; - - simple-audio-card,codec { - sound-dai = <&tlv320aic3106>; - clocks = <&atl_clkin2_ck>; - }; - }; -}; - -&dra7_pmx_core { - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - nand_default: nand_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - tps65917_pins_default: tps65917_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ - >; - }; - - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; - - dcan1_pins_default: dcan1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ - DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ - >; - }; - - dcan1_pins_sleep: dcan1_pins_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ - DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ - >; - }; - - qspi1_pins: pinmux_qspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ - DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ - DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ - DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ - DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ - DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ - DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ - >; - }; - - hdmi_pins: pinmux_hdmi_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ - >; - }; - - atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ - >; - }; - - mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15) - >; - }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clock-frequency = <400000>; - - tps65917: tps65917@58 { - compatible = "ti,tps65917"; - reg = <0x58>; - - pinctrl-names = "default"; - pinctrl-0 = <&tps65917_pins_default>; - - interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-controller; - #interrupt-cells = <2>; - - ti,system-power-controller; - - tps65917_pmic { - compatible = "ti,tps65917-pmic"; - - regulators { - smps1_reg: smps1 { - /* VDD_MPU */ - regulator-name = "smps1"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps2_reg: smps2 { - /* VDD_CORE */ - regulator-name = "smps2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1060000>; - regulator-boot-on; - regulator-always-on; - }; - - smps3_reg: smps3 { - /* VDD_GPU IVA DSPEVE */ - regulator-name = "smps3"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - - smps4_reg: smps4 { - /* VDDS1V8 */ - regulator-name = "smps4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps5_reg: smps5 { - /* VDD_DDR */ - regulator-name = "smps5"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: ldo1 { - /* LDO1_OUT --> SDIO */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-bypass; - }; - - ldo2_reg: ldo2 { - /* LDO2_OUT --> TP1017 (UNUSED) */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-allow-bypass; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHY */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PLL */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldo4"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - }; - }; - - tps65917_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps65917>; - interrupts = <1 IRQ_TYPE_NONE>; - wakeup-source; - ti,palmas-long-press-seconds = <6>; - }; - }; - - pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575"; - reg = <0x21>; - lines-initial-states = <0x1408>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - tlv320aic3106: tlv320aic3106@19 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3106"; - reg = <0x19>; - adc-settle-ms = <40>; - ai3x-micbias-vg = <1>; /* 2.0V */ - status = "okay"; - - /* Regulators */ - AVDD-supply = <&evm_3v3>; - IOVDD-supply = <&evm_3v3>; - DRVDD-supply = <&evm_3v3>; - DVDD-supply = <&aic_dvdd>; + regulator-allow-bypass; }; }; -&i2c5 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - clock-frequency = <400000>; - - pcf_hdmi: pcf8575@26 { - compatible = "nxp,pcf8575"; - reg = <0x26>; - gpio-controller; - #gpio-cells = <2>; - /* - * initial state is used here to keep the mdio interface - * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and - * VIN2_S0 driven high otherwise Ethernet stops working - * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 - */ - lines-initial-states = <0x0f2b>; - - p1 { - /* vin6_sel_s0: high: VIN6, low: audio */ - gpio-hog; - gpios = <1 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "vin6_sel_s0"; - }; - }; -}; - -&uart1 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3e0>; -}; - -&elm { - status = "okay"; -}; - -&gpmc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_default>; - ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ - nand@0,0 { - /* To use NAND, DIP switch SW5 must be set like so: - * SW5.1 (NAND_SELn) = ON (LOW) - * SW5.9 (GPMC_WPN) = OFF (HIGH) - */ - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* device IO registers */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - ti,nand-ecc-opt = "bch8"; - ti,elm-id = <&elm>; - nand-bus-width = <16>; - gpmc,device-width = <2>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <80>; - gpmc,cs-wr-off-ns = <80>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <60>; - gpmc,adv-wr-off-ns = <60>; - gpmc,we-on-ns = <10>; - gpmc,we-off-ns = <50>; - gpmc,oe-on-ns = <4>; - gpmc,oe-off-ns = <40>; - gpmc,access-ns = <40>; - gpmc,wr-access-ns = <80>; - gpmc,rd-cycle-ns = <80>; - gpmc,wr-cycle-ns = <80>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-data-mux-bus-ns = <0>; - /* MTD partition table */ - /* All SPL-* partitions are sized to minimal length - * which can be independently programmable. For - * NAND flash this is equal to size of erase-block */ - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "NAND.SPL"; - reg = <0x00000000 0x000020000>; - }; - partition@1 { - label = "NAND.SPL.backup1"; - reg = <0x00020000 0x00020000>; - }; - partition@2 { - label = "NAND.SPL.backup2"; - reg = <0x00040000 0x00020000>; - }; - partition@3 { - label = "NAND.SPL.backup3"; - reg = <0x00060000 0x00020000>; - }; - partition@4 { - label = "NAND.u-boot-spl-os"; - reg = <0x00080000 0x00040000>; - }; - partition@5 { - label = "NAND.u-boot"; - reg = <0x000c0000 0x00100000>; - }; - partition@6 { - label = "NAND.u-boot-env"; - reg = <0x001c0000 0x00020000>; - }; - partition@7 { - label = "NAND.u-boot-env.backup1"; - reg = <0x001e0000 0x00020000>; - }; - partition@8 { - label = "NAND.kernel"; - reg = <0x00200000 0x00800000>; - }; - partition@9 { - label = "NAND.file-system"; - reg = <0x00a00000 0x0f600000>; - }; - }; -}; - -&usb2_phy1 { - phy-supply = <&ldo4_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldo4_reg>; -}; - -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - -&usb1 { - dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; -}; - -&usb2 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; -}; - -&mmc1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&evm_3v3_sd>; - vmmc_aux-supply = <&ldo1_reg>; - bus-width = <4>; - /* - * SDCD signal is not being used here - using the fact that GPIO mode - * is a viable alternative - */ - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; - max-frequency = <192000000>; -}; - -&mmc2 { - /* SW5-3 in ON position */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_default>; - - vmmc-supply = <&evm_3v3>; - bus-width = <8>; - ti,non-removable; - max-frequency = <192000000>; +&hdmi { + vdda-supply = <&ldo3_reg>; }; -&dra7_pmx_core { - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; +&pcf_gpio_21 { + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; }; &mac { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; slaves = <1>; mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; }; @@ -697,158 +43,3 @@ phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; - -&dcan1 { - status = "ok"; - pinctrl-names = "default", "sleep", "active"; - pinctrl-0 = <&dcan1_pins_sleep>; - pinctrl-1 = <&dcan1_pins_sleep>; - pinctrl-2 = <&dcan1_pins_default>; -}; - -&qspi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi1_pins>; - - spi-max-frequency = <48000000>; - m25p80@0 { - compatible = "s25fl256s1"; - spi-max-frequency = <48000000>; - reg = <0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - spi-cpol; - spi-cpha; - #address-cells = <1>; - #size-cells = <1>; - - /* MTD partition table. - * The ROM checks the first four physical blocks - * for a valid file to boot and the flash here is - * 64KiB block size. - */ - partition@0 { - label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; - }; - partition@1 { - label = "QSPI.SPL.backup1"; - reg = <0x00010000 0x00010000>; - }; - partition@2 { - label = "QSPI.SPL.backup2"; - reg = <0x00020000 0x00010000>; - }; - partition@3 { - label = "QSPI.SPL.backup3"; - reg = <0x00030000 0x00010000>; - }; - partition@4 { - label = "QSPI.u-boot"; - reg = <0x00040000 0x00100000>; - }; - partition@5 { - label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00080000>; - }; - partition@6 { - label = "QSPI.u-boot-env"; - reg = <0x001c0000 0x00010000>; - }; - partition@7 { - label = "QSPI.u-boot-env.backup1"; - reg = <0x001d0000 0x0010000>; - }; - partition@8 { - label = "QSPI.kernel"; - reg = <0x001e0000 0x0800000>; - }; - partition@9 { - label = "QSPI.file-system"; - reg = <0x009e0000 0x01620000>; - }; - }; -}; - -&dss { - status = "ok"; - - vdda_video-supply = <&ldo5_reg>; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&ldo3_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; - -&atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - - assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_gfclk_mux>, - <&dpll_abe_ck>, - <&dpll_abe_m2x2_ck>, - <&atl_clkin2_ck>; - assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; - assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; - - status = "okay"; - - atl2 { - bws = <DRA7_ATL_WS_MCASP2_FSX>; - aws = <DRA7_ATL_WS_MCASP3_FSX>; - }; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; - - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&atl_clkin2_ck>; - - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializer */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; -}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index ef2164a99d0f..8378b44ee567 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -196,7 +196,7 @@ clock-frequency = <0>; }; - dpll_abe_ck: dpll_abe_ck { + dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; @@ -209,7 +209,7 @@ clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck { + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -220,7 +220,7 @@ ti,invert-autoidle-bit; }; - abe_clk: abe_clk { + abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -229,7 +229,7 @@ ti,index-power-of-two; }; - dpll_abe_m2_ck: dpll_abe_m2_ck { + dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_ck>; @@ -240,7 +240,7 @@ ti,invert-autoidle-bit; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck { + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -251,7 +251,7 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: dpll_core_byp_mux { + dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -259,7 +259,7 @@ reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; @@ -272,7 +272,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck { + dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -291,14 +291,14 @@ clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -325,7 +325,7 @@ clock-div = <1>; }; - dpll_dsp_byp_mux: dpll_dsp_byp_mux { + dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; @@ -333,14 +333,14 @@ reg = <0x0240>; }; - dpll_dsp_ck: dpll_dsp_ck { + dpll_dsp_ck: dpll_dsp_ck@234 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; - dpll_dsp_m2_ck: dpll_dsp_m2_ck { + dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_dsp_ck>; @@ -359,7 +359,7 @@ clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux { + dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; @@ -367,14 +367,14 @@ reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck { + dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; - dpll_iva_m2_ck: dpll_iva_m2_ck { + dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_iva_ck>; @@ -393,7 +393,7 @@ clock-div = <1>; }; - dpll_gpu_byp_mux: dpll_gpu_byp_mux { + dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -401,14 +401,14 @@ reg = <0x02e4>; }; - dpll_gpu_ck: dpll_gpu_ck { + dpll_gpu_ck: dpll_gpu_ck@2d8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; - dpll_gpu_m2_ck: dpll_gpu_m2_ck { + dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gpu_ck>; @@ -419,7 +419,7 @@ ti,invert-autoidle-bit; }; - dpll_core_m2_ck: dpll_core_m2_ck { + dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; @@ -438,7 +438,7 @@ clock-div = <1>; }; - dpll_ddr_byp_mux: dpll_ddr_byp_mux { + dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -446,14 +446,14 @@ reg = <0x021c>; }; - dpll_ddr_ck: dpll_ddr_ck { + dpll_ddr_ck: dpll_ddr_ck@210 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck { + dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_ck>; @@ -464,7 +464,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: dpll_gmac_byp_mux { + dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; @@ -472,14 +472,14 @@ reg = <0x02b4>; }; - dpll_gmac_ck: dpll_gmac_ck { + dpll_gmac_ck: dpll_gmac_ck@2a8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; - dpll_gmac_m2_ck: dpll_gmac_m2_ck { + dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_ck>; @@ -538,7 +538,7 @@ clock-div = <1>; }; - dpll_eve_byp_mux: dpll_eve_byp_mux { + dpll_eve_byp_mux: dpll_eve_byp_mux@290 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; @@ -546,14 +546,14 @@ reg = <0x0290>; }; - dpll_eve_ck: dpll_eve_ck { + dpll_eve_ck: dpll_eve_ck@284 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; - dpll_eve_m2_ck: dpll_eve_m2_ck { + dpll_eve_m2_ck: dpll_eve_m2_ck@294 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_eve_ck>; @@ -572,7 +572,7 @@ clock-div = <1>; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck { + dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -583,7 +583,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck { + dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -594,7 +594,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck { + dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -605,7 +605,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck { + dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -616,7 +616,7 @@ ti,invert-autoidle-bit; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck { + dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -633,7 +633,7 @@ clocks = <&dpll_ddr_ck>; }; - dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck { + dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_x2_ck>; @@ -650,7 +650,7 @@ clocks = <&dpll_dsp_ck>; }; - dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck { + dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_dsp_x2_ck>; @@ -667,7 +667,7 @@ clocks = <&dpll_gmac_ck>; }; - dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck { + dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -678,7 +678,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck { + dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -689,7 +689,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck { + dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -700,7 +700,7 @@ ti,invert-autoidle-bit; }; - dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck { + dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_x2_ck>; @@ -735,7 +735,7 @@ clock-div = <1>; }; - l3_iclk_div: l3_iclk_div { + l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; ti,max-div = <2>; @@ -785,7 +785,7 @@ clock-div = <1>; }; - ipu1_gfclk_mux: ipu1_gfclk_mux { + ipu1_gfclk_mux: ipu1_gfclk_mux@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; @@ -793,7 +793,7 @@ reg = <0x0520>; }; - mcasp1_ahclkr_mux: mcasp1_ahclkr_mux { + mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -801,7 +801,7 @@ reg = <0x0550>; }; - mcasp1_ahclkx_mux: mcasp1_ahclkx_mux { + mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -809,7 +809,7 @@ reg = <0x0550>; }; - mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux { + mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -817,7 +817,7 @@ reg = <0x0550>; }; - timer5_gfclk_mux: timer5_gfclk_mux { + timer5_gfclk_mux: timer5_gfclk_mux@558 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -825,7 +825,7 @@ reg = <0x0558>; }; - timer6_gfclk_mux: timer6_gfclk_mux { + timer6_gfclk_mux: timer6_gfclk_mux@560 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -833,7 +833,7 @@ reg = <0x0560>; }; - timer7_gfclk_mux: timer7_gfclk_mux { + timer7_gfclk_mux: timer7_gfclk_mux@568 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -841,7 +841,7 @@ reg = <0x0568>; }; - timer8_gfclk_mux: timer8_gfclk_mux { + timer8_gfclk_mux: timer8_gfclk_mux@570 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; @@ -849,7 +849,7 @@ reg = <0x0570>; }; - uart6_gfclk_mux: uart6_gfclk_mux { + uart6_gfclk_mux: uart6_gfclk_mux@580 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -864,7 +864,7 @@ }; }; &prm_clocks { - sys_clkin1: sys_clkin1 { + sys_clkin1: sys_clkin1@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; @@ -872,28 +872,28 @@ ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux { + abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0118>; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux { + abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x0114>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux { + abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x010c>; }; - abe_24m_fclk: abe_24m_fclk { + abe_24m_fclk: abe_24m_fclk@11c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -901,7 +901,7 @@ ti,dividers = <8>, <16>; }; - aess_fclk: aess_fclk { + aess_fclk: aess_fclk@178 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&abe_clk>; @@ -909,7 +909,7 @@ ti,max-div = <2>; }; - abe_giclk_div: abe_giclk_div { + abe_giclk_div: abe_giclk_div@174 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&aess_fclk>; @@ -917,7 +917,7 @@ ti,max-div = <2>; }; - abe_lp_clk_div: abe_lp_clk_div { + abe_lp_clk_div: abe_lp_clk_div@1d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -925,7 +925,7 @@ ti,dividers = <16>, <32>; }; - abe_sys_clk_div: abe_sys_clk_div { + abe_sys_clk_div: abe_sys_clk_div@120 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -933,14 +933,14 @@ ti,max-div = <2>; }; - adc_gfclk_mux: adc_gfclk_mux { + adc_gfclk_mux: adc_gfclk_mux@1dc { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; reg = <0x01dc>; }; - sys_clk1_dclk_div: sys_clk1_dclk_div { + sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -949,7 +949,7 @@ ti,index-power-of-two; }; - sys_clk2_dclk_div: sys_clk2_dclk_div { + sys_clk2_dclk_div: sys_clk2_dclk_div@1cc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin2>; @@ -958,7 +958,7 @@ ti,index-power-of-two; }; - per_abe_x1_dclk_div: per_abe_x1_dclk_div { + per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2_ck>; @@ -967,7 +967,7 @@ ti,index-power-of-two; }; - dsp_gclk_div: dsp_gclk_div { + dsp_gclk_div: dsp_gclk_div@18c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_dsp_m2_ck>; @@ -976,7 +976,7 @@ ti,index-power-of-two; }; - gpu_dclk: gpu_dclk { + gpu_dclk: gpu_dclk@1a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gpu_m2_ck>; @@ -985,7 +985,7 @@ ti,index-power-of-two; }; - emif_phy_dclk_div: emif_phy_dclk_div { + emif_phy_dclk_div: emif_phy_dclk_div@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_m2_ck>; @@ -994,7 +994,7 @@ ti,index-power-of-two; }; - gmac_250m_dclk_div: gmac_250m_dclk_div { + gmac_250m_dclk_div: gmac_250m_dclk_div@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_m2_ck>; @@ -1003,7 +1003,7 @@ ti,index-power-of-two; }; - l3init_480m_dclk_div: l3init_480m_dclk_div { + l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_m2_ck>; @@ -1012,7 +1012,7 @@ ti,index-power-of-two; }; - usb_otg_dclk_div: usb_otg_dclk_div { + usb_otg_dclk_div: usb_otg_dclk_div@184 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&usb_otg_clkin_ck>; @@ -1021,7 +1021,7 @@ ti,index-power-of-two; }; - sata_dclk_div: sata_dclk_div { + sata_dclk_div: sata_dclk_div@1c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -1030,7 +1030,7 @@ ti,index-power-of-two; }; - pcie2_dclk_div: pcie2_dclk_div { + pcie2_dclk_div: pcie2_dclk_div@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_pcie_ref_m2_ck>; @@ -1039,7 +1039,7 @@ ti,index-power-of-two; }; - pcie_dclk_div: pcie_dclk_div { + pcie_dclk_div: pcie_dclk_div@1b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&apll_pcie_m2_ck>; @@ -1048,7 +1048,7 @@ ti,index-power-of-two; }; - emu_dclk_div: emu_dclk_div { + emu_dclk_div: emu_dclk_div@194 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -1057,7 +1057,7 @@ ti,index-power-of-two; }; - secure_32k_dclk_div: secure_32k_dclk_div { + secure_32k_dclk_div: secure_32k_dclk_div@1c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&secure_32k_clk_src_ck>; @@ -1066,21 +1066,21 @@ ti,index-power-of-two; }; - clkoutmux0_clk_mux: clkoutmux0_clk_mux { + clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0158>; }; - clkoutmux1_clk_mux: clkoutmux1_clk_mux { + clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x015c>; }; - clkoutmux2_clk_mux: clkoutmux2_clk_mux { + clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; @@ -1095,21 +1095,21 @@ clock-div = <2>; }; - eve_clk: eve_clk { + eve_clk: eve_clk@180 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; reg = <0x0180>; }; - hdmi_dpll_clk_mux: hdmi_dpll_clk_mux { + hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0164>; }; - mlb_clk: mlb_clk { + mlb_clk: mlb_clk@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mlb_clkin_ck>; @@ -1118,7 +1118,7 @@ ti,index-power-of-two; }; - mlbp_clk: mlbp_clk { + mlbp_clk: mlbp_clk@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mlbp_clkin_ck>; @@ -1127,7 +1127,7 @@ ti,index-power-of-two; }; - per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div { + per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2_ck>; @@ -1136,7 +1136,7 @@ ti,index-power-of-two; }; - timer_sys_clk_div: timer_sys_clk_div { + timer_sys_clk_div: timer_sys_clk_div@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin1>; @@ -1144,28 +1144,28 @@ ti,max-div = <2>; }; - video1_dpll_clk_mux: video1_dpll_clk_mux { + video1_dpll_clk_mux: video1_dpll_clk_mux@168 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0168>; }; - video2_dpll_clk_mux: video2_dpll_clk_mux { + video2_dpll_clk_mux: video2_dpll_clk_mux@16c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x016c>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux { + wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; - gpio1_dbclk: gpio1_dbclk { + gpio1_dbclk: gpio1_dbclk@1838 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1173,7 +1173,7 @@ reg = <0x1838>; }; - dcan1_sys_clk_mux: dcan1_sys_clk_mux { + dcan1_sys_clk_mux: dcan1_sys_clk_mux@1888 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&sys_clkin2>; @@ -1181,7 +1181,7 @@ reg = <0x1888>; }; - timer1_gfclk_mux: timer1_gfclk_mux { + timer1_gfclk_mux: timer1_gfclk_mux@1840 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1189,7 +1189,7 @@ reg = <0x1840>; }; - uart10_gfclk_mux: uart10_gfclk_mux { + uart10_gfclk_mux: uart10_gfclk_mux@1880 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -1198,14 +1198,14 @@ }; }; &cm_core_clocks { - dpll_pcie_ref_ck: dpll_pcie_ref_ck { + dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&sys_clkin1>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; - dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck { + dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_pcie_ref_ck>; @@ -1224,7 +1224,7 @@ ti,bit-shift = <7>; }; - apll_pcie_ck: apll_pcie_ck { + apll_pcie_ck: apll_pcie_ck@21c { #clock-cells = <0>; compatible = "ti,dra7-apll-clock"; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; @@ -1313,7 +1313,7 @@ clock-div = <1>; }; - dpll_per_byp_mux: dpll_per_byp_mux { + dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; @@ -1321,14 +1321,14 @@ reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -1347,7 +1347,7 @@ clock-div = <1>; }; - dpll_usb_byp_mux: dpll_usb_byp_mux { + dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; @@ -1355,14 +1355,14 @@ reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck { + dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck { + dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; @@ -1373,7 +1373,7 @@ ti,invert-autoidle-bit; }; - dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck { + dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_pcie_ref_ck>; @@ -1390,7 +1390,7 @@ clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck { + dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1401,7 +1401,7 @@ ti,invert-autoidle-bit; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck { + dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1412,7 +1412,7 @@ ti,invert-autoidle-bit; }; - dpll_per_h13x2_ck: dpll_per_h13x2_ck { + dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1423,7 +1423,7 @@ ti,invert-autoidle-bit; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck { + dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1434,7 +1434,7 @@ ti,invert-autoidle-bit; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck { + dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -1493,7 +1493,7 @@ clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk { + l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_m2_ck>; @@ -1501,7 +1501,7 @@ ti,dividers = <1>, <8>; }; - clkout2_clk: clkout2_clk { + clkout2_clk: clkout2_clk@6b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkoutmux2_clk_mux>; @@ -1509,7 +1509,7 @@ reg = <0x06b0>; }; - l3init_960m_gfclk: l3init_960m_gfclk { + l3init_960m_gfclk: l3init_960m_gfclk@6c0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_clkdcoldo>; @@ -1517,7 +1517,7 @@ reg = <0x06c0>; }; - dss_32khz_clk: dss_32khz_clk { + dss_32khz_clk: dss_32khz_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1525,7 +1525,7 @@ reg = <0x1120>; }; - dss_48mhz_clk: dss_48mhz_clk { + dss_48mhz_clk: dss_48mhz_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48m_fclk>; @@ -1533,7 +1533,7 @@ reg = <0x1120>; }; - dss_dss_clk: dss_dss_clk { + dss_dss_clk: dss_dss_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_h12x2_ck>; @@ -1542,7 +1542,7 @@ ti,set-rate-parent; }; - dss_hdmi_clk: dss_hdmi_clk { + dss_hdmi_clk: dss_hdmi_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&hdmi_dpll_clk_mux>; @@ -1550,7 +1550,7 @@ reg = <0x1120>; }; - dss_video1_clk: dss_video1_clk { + dss_video1_clk: dss_video1_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&video1_dpll_clk_mux>; @@ -1558,7 +1558,7 @@ reg = <0x1120>; }; - dss_video2_clk: dss_video2_clk { + dss_video2_clk: dss_video2_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&video2_dpll_clk_mux>; @@ -1566,7 +1566,7 @@ reg = <0x1120>; }; - gpio2_dbclk: gpio2_dbclk { + gpio2_dbclk: gpio2_dbclk@1760 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1574,7 +1574,7 @@ reg = <0x1760>; }; - gpio3_dbclk: gpio3_dbclk { + gpio3_dbclk: gpio3_dbclk@1768 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1582,7 +1582,7 @@ reg = <0x1768>; }; - gpio4_dbclk: gpio4_dbclk { + gpio4_dbclk: gpio4_dbclk@1770 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1590,7 +1590,7 @@ reg = <0x1770>; }; - gpio5_dbclk: gpio5_dbclk { + gpio5_dbclk: gpio5_dbclk@1778 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1598,7 +1598,7 @@ reg = <0x1778>; }; - gpio6_dbclk: gpio6_dbclk { + gpio6_dbclk: gpio6_dbclk@1780 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1606,7 +1606,7 @@ reg = <0x1780>; }; - gpio7_dbclk: gpio7_dbclk { + gpio7_dbclk: gpio7_dbclk@1810 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1614,7 +1614,7 @@ reg = <0x1810>; }; - gpio8_dbclk: gpio8_dbclk { + gpio8_dbclk: gpio8_dbclk@1818 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1622,7 +1622,7 @@ reg = <0x1818>; }; - mmc1_clk32k: mmc1_clk32k { + mmc1_clk32k: mmc1_clk32k@1328 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1630,7 +1630,7 @@ reg = <0x1328>; }; - mmc2_clk32k: mmc2_clk32k { + mmc2_clk32k: mmc2_clk32k@1330 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1638,7 +1638,7 @@ reg = <0x1330>; }; - mmc3_clk32k: mmc3_clk32k { + mmc3_clk32k: mmc3_clk32k@1820 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1646,7 +1646,7 @@ reg = <0x1820>; }; - mmc4_clk32k: mmc4_clk32k { + mmc4_clk32k: mmc4_clk32k@1828 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1654,7 +1654,7 @@ reg = <0x1828>; }; - sata_ref_clk: sata_ref_clk { + sata_ref_clk: sata_ref_clk@1388 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_clkin1>; @@ -1662,7 +1662,7 @@ reg = <0x1388>; }; - usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@13f0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_960m_gfclk>; @@ -1670,7 +1670,7 @@ reg = <0x13f0>; }; - usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { + usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@1340 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_960m_gfclk>; @@ -1678,7 +1678,7 @@ reg = <0x1340>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1686,7 +1686,7 @@ reg = <0x0640>; }; - usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k { + usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1694,7 +1694,7 @@ reg = <0x0688>; }; - usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k { + usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1702,7 +1702,7 @@ reg = <0x0698>; }; - atl_dpll_clk_mux: atl_dpll_clk_mux { + atl_dpll_clk_mux: atl_dpll_clk_mux@c00 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>; @@ -1710,7 +1710,7 @@ reg = <0x0c00>; }; - atl_gfclk_mux: atl_gfclk_mux { + atl_gfclk_mux: atl_gfclk_mux@c00 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>; @@ -1718,7 +1718,7 @@ reg = <0x0c00>; }; - gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div { + gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_gmac_m2_ck>; @@ -1727,7 +1727,7 @@ ti,dividers = <2>; }; - gmac_rft_clk_mux: gmac_rft_clk_mux { + gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>; @@ -1735,7 +1735,7 @@ reg = <0x13d0>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux { + gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; @@ -1743,7 +1743,7 @@ reg = <0x1220>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux { + gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; @@ -1751,7 +1751,7 @@ reg = <0x1220>; }; - l3instr_ts_gclk_div: l3instr_ts_gclk_div { + l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&wkupaon_iclk_mux>; @@ -1760,7 +1760,7 @@ ti,dividers = <8>, <16>, <32>; }; - mcasp2_ahclkr_mux: mcasp2_ahclkr_mux { + mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@1860 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1768,7 +1768,7 @@ reg = <0x1860>; }; - mcasp2_ahclkx_mux: mcasp2_ahclkx_mux { + mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@1860 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1776,7 +1776,7 @@ reg = <0x1860>; }; - mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux { + mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@1860 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1784,7 +1784,7 @@ reg = <0x1860>; }; - mcasp3_ahclkx_mux: mcasp3_ahclkx_mux { + mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@1868 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1792,7 +1792,7 @@ reg = <0x1868>; }; - mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux { + mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1800,7 +1800,7 @@ reg = <0x1868>; }; - mcasp4_ahclkx_mux: mcasp4_ahclkx_mux { + mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@1898 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1808,7 +1808,7 @@ reg = <0x1898>; }; - mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux { + mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@1898 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1816,7 +1816,7 @@ reg = <0x1898>; }; - mcasp5_ahclkx_mux: mcasp5_ahclkx_mux { + mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@1878 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1824,7 +1824,7 @@ reg = <0x1878>; }; - mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux { + mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@1878 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1832,7 +1832,7 @@ reg = <0x1878>; }; - mcasp6_ahclkx_mux: mcasp6_ahclkx_mux { + mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@1904 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1840,7 +1840,7 @@ reg = <0x1904>; }; - mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux { + mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@1904 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1848,7 +1848,7 @@ reg = <0x1904>; }; - mcasp7_ahclkx_mux: mcasp7_ahclkx_mux { + mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@1908 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1856,7 +1856,7 @@ reg = <0x1908>; }; - mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux { + mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@1908 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1864,7 +1864,7 @@ reg = <0x1908>; }; - mcasp8_ahclk_mux: mcasp8_ahclk_mux { + mcasp8_ahclkx_mux: mcasp8_ahclkx_mux@1890 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; @@ -1872,7 +1872,7 @@ reg = <0x1890>; }; - mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux { + mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@1890 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; @@ -1880,7 +1880,7 @@ reg = <0x1890>; }; - mmc1_fclk_mux: mmc1_fclk_mux { + mmc1_fclk_mux: mmc1_fclk_mux@1328 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; @@ -1888,7 +1888,7 @@ reg = <0x1328>; }; - mmc1_fclk_div: mmc1_fclk_div { + mmc1_fclk_div: mmc1_fclk_div@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc1_fclk_mux>; @@ -1898,7 +1898,7 @@ ti,index-power-of-two; }; - mmc2_fclk_mux: mmc2_fclk_mux { + mmc2_fclk_mux: mmc2_fclk_mux@1330 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; @@ -1906,7 +1906,7 @@ reg = <0x1330>; }; - mmc2_fclk_div: mmc2_fclk_div { + mmc2_fclk_div: mmc2_fclk_div@1330 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc2_fclk_mux>; @@ -1916,7 +1916,7 @@ ti,index-power-of-two; }; - mmc3_gfclk_mux: mmc3_gfclk_mux { + mmc3_gfclk_mux: mmc3_gfclk_mux@1820 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -1924,7 +1924,7 @@ reg = <0x1820>; }; - mmc3_gfclk_div: mmc3_gfclk_div { + mmc3_gfclk_div: mmc3_gfclk_div@1820 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc3_gfclk_mux>; @@ -1934,7 +1934,7 @@ ti,index-power-of-two; }; - mmc4_gfclk_mux: mmc4_gfclk_mux { + mmc4_gfclk_mux: mmc4_gfclk_mux@1828 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -1942,7 +1942,7 @@ reg = <0x1828>; }; - mmc4_gfclk_div: mmc4_gfclk_div { + mmc4_gfclk_div: mmc4_gfclk_div@1828 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc4_gfclk_mux>; @@ -1952,7 +1952,7 @@ ti,index-power-of-two; }; - qspi_gfclk_mux: qspi_gfclk_mux { + qspi_gfclk_mux: qspi_gfclk_mux@1838 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>; @@ -1960,7 +1960,7 @@ reg = <0x1838>; }; - qspi_gfclk_div: qspi_gfclk_div { + qspi_gfclk_div: qspi_gfclk_div@1838 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&qspi_gfclk_mux>; @@ -1970,7 +1970,7 @@ ti,index-power-of-two; }; - timer10_gfclk_mux: timer10_gfclk_mux { + timer10_gfclk_mux: timer10_gfclk_mux@1728 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1978,7 +1978,7 @@ reg = <0x1728>; }; - timer11_gfclk_mux: timer11_gfclk_mux { + timer11_gfclk_mux: timer11_gfclk_mux@1730 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1986,7 +1986,7 @@ reg = <0x1730>; }; - timer13_gfclk_mux: timer13_gfclk_mux { + timer13_gfclk_mux: timer13_gfclk_mux@17c8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -1994,7 +1994,7 @@ reg = <0x17c8>; }; - timer14_gfclk_mux: timer14_gfclk_mux { + timer14_gfclk_mux: timer14_gfclk_mux@17d0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2002,7 +2002,7 @@ reg = <0x17d0>; }; - timer15_gfclk_mux: timer15_gfclk_mux { + timer15_gfclk_mux: timer15_gfclk_mux@17d8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2010,7 +2010,7 @@ reg = <0x17d8>; }; - timer16_gfclk_mux: timer16_gfclk_mux { + timer16_gfclk_mux: timer16_gfclk_mux@1830 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2018,7 +2018,7 @@ reg = <0x1830>; }; - timer2_gfclk_mux: timer2_gfclk_mux { + timer2_gfclk_mux: timer2_gfclk_mux@1738 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2026,7 +2026,7 @@ reg = <0x1738>; }; - timer3_gfclk_mux: timer3_gfclk_mux { + timer3_gfclk_mux: timer3_gfclk_mux@1740 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2034,7 +2034,7 @@ reg = <0x1740>; }; - timer4_gfclk_mux: timer4_gfclk_mux { + timer4_gfclk_mux: timer4_gfclk_mux@1748 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2042,7 +2042,7 @@ reg = <0x1748>; }; - timer9_gfclk_mux: timer9_gfclk_mux { + timer9_gfclk_mux: timer9_gfclk_mux@1750 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; @@ -2050,7 +2050,7 @@ reg = <0x1750>; }; - uart1_gfclk_mux: uart1_gfclk_mux { + uart1_gfclk_mux: uart1_gfclk_mux@1840 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2058,7 +2058,7 @@ reg = <0x1840>; }; - uart2_gfclk_mux: uart2_gfclk_mux { + uart2_gfclk_mux: uart2_gfclk_mux@1848 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2066,7 +2066,7 @@ reg = <0x1848>; }; - uart3_gfclk_mux: uart3_gfclk_mux { + uart3_gfclk_mux: uart3_gfclk_mux@1850 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2074,7 +2074,7 @@ reg = <0x1850>; }; - uart4_gfclk_mux: uart4_gfclk_mux { + uart4_gfclk_mux: uart4_gfclk_mux@1858 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2082,7 +2082,7 @@ reg = <0x1858>; }; - uart5_gfclk_mux: uart5_gfclk_mux { + uart5_gfclk_mux: uart5_gfclk_mux@1870 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2090,7 +2090,7 @@ reg = <0x1870>; }; - uart7_gfclk_mux: uart7_gfclk_mux { + uart7_gfclk_mux: uart7_gfclk_mux@18d0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2098,7 +2098,7 @@ reg = <0x18d0>; }; - uart8_gfclk_mux: uart8_gfclk_mux { + uart8_gfclk_mux: uart8_gfclk_mux@18e0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2106,7 +2106,7 @@ reg = <0x18e0>; }; - uart9_gfclk_mux: uart9_gfclk_mux { + uart9_gfclk_mux: uart9_gfclk_mux@18e8 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; @@ -2114,7 +2114,7 @@ reg = <0x18e8>; }; - vip1_gclk_mux: vip1_gclk_mux { + vip1_gclk_mux: vip1_gclk_mux@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; @@ -2122,7 +2122,7 @@ reg = <0x1020>; }; - vip2_gclk_mux: vip2_gclk_mux { + vip2_gclk_mux: vip2_gclk_mux@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; @@ -2130,7 +2130,7 @@ reg = <0x1028>; }; - vip3_gclk_mux: vip3_gclk_mux { + vip3_gclk_mux: vip3_gclk_mux@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; @@ -2147,7 +2147,7 @@ }; &scm_conf_clocks { - dss_deshdcp_clk: dss_deshdcp_clk { + dss_deshdcp_clk: dss_deshdcp_clk@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3_iclk_div>; @@ -2155,7 +2155,7 @@ reg = <0x558>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk { + ehrpwm0_tbclk: ehrpwm0_tbclk@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_root_clk_div>; @@ -2163,7 +2163,7 @@ reg = <0x0558>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk { + ehrpwm1_tbclk: ehrpwm1_tbclk@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_root_clk_div>; @@ -2171,7 +2171,7 @@ reg = <0x0558>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk { + ehrpwm2_tbclk: ehrpwm2_tbclk@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_root_clk_div>; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 8c24975e8f9d..a35b851e1cd7 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -105,8 +105,8 @@ &pfc { uart1_pins: serial@e1030000 { - renesas,groups = "uart1_ctrl", "uart1_data"; - renesas,function = "uart1"; + groups = "uart1_ctrl", "uart1_data"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts new file mode 100644 index 000000000000..be4d6aa379f3 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -0,0 +1,43 @@ +/* + * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's ARTIK5 evaluation board + * which is based on Samsung Exynos3250 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos3250-artik5.dtsi" + +/ { + model = "Samsung ARTIK5 evaluation board"; + compatible = "samsung,artik5-eval", "samsung,artik5", + "samsung,exynos3250", "samsung,exynos3"; +}; + +&mshc_2 { + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + vqmmc-supply = <&ldo3_reg>; + card-detect-delay = <200>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi new file mode 100644 index 000000000000..130e946f1414 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -0,0 +1,334 @@ +/* + * Samsung's Exynos3250 based ARTIK5 module device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's ARTIK5 module which is based on + * Samsung Exynos3250 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos3250.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + chosen { + stdout-path = &serial_2; + }; + + memory { + reg = <0x40000000 0x1ff00000>; + }; + + firmware@0205f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0205f000 0x1000>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 500MHz */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo7_reg>; + assigned-clocks = <&cmu CLK_SCLK_TSADC>; + assigned-clock-rates = <6000000>; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + s2mps14_pmic@66 { + compatible = "samsung,s2mps14-pmic"; + interrupt-parent = <&gpx3>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x66>; + + s2mps14_osc: clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", + "s2mps14_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + /* VDD_ALIVE15x */ + regulator-name = "VLDO1_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + /* VDDQM176 ~ VDDQM185 */ + regulator-name = "VLDO2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + /* + * VDD1_E106 ~ VDD1_E111 + * DVDD_RTC_AP, DVDD_MMC2_AP + */ + regulator-name = "VLDO3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + /* AVDD_PLL1120 ~ AVDD_PLL11201 */ + regulator-name = "VLDO4_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */ + regulator-name = "VLDO5_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + /* VDD_USB, VDD10_HSIC */ + regulator-name = "VLDO6_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + /* + * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2, + * AVDD_ADC, AVDD_ABB_0, M4S_VDD18 + */ + regulator-name = "VLDO7_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + /* AVDD33_UOTG */ + regulator-name = "VLDO8_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + /* VDDQ_E86 ~ VDDQ_E105*/ + regulator-name = "VLDO9_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VLDO10_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo11_reg: LDO11 { + /* VDD74 ~ VDD75 */ + regulator-name = "VLDO11_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo12_reg: LDO12 { + /* VDD72 ~ VDD73 */ + regulator-name = "VLDO12_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VLDO13_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VLDO14_2.7V"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VLDO_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VLDO16_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VLDO17_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo18_reg: LDO18 { + /* DVDD_MMC2_AP */ + regulator-name = "VLDO18_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VLDO19_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "VLDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "VLDO21_1.25V"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "VLDO22_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo23_reg: LDO23 { + /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */ + regulator-name = "VLDO23_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VLDO24_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "VLDO25_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + /* VDD_MIF */ + regulator-name = "VBUCK1_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + /* VDD_CPU */ + regulator-name = "VBUCK2_1.2V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + /* VDD_G3D */ + regulator-name = "VBUCK3_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VBUCK4_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "VBUCK5_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + }; + }; +}; + +&mshc_0 { + num-slots = <1>; + non-removable; + cap-mmc-highspeed; + card-detect-delay = <200>; + vmmc-supply = <&ldo12_reg>; + clock-frequency = <100000000>; + clock-freq-min-max = <400000 100000000>; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + status = "okay"; +}; + +&rtc { + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&tmu { + status = "okay"; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 9e2840b59ae8..267f81adb42f 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -558,7 +558,17 @@ &pinctrl_1 { pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; + pinctrl-0 = <&initial1 &sleep1>; + + initial1: initial-state { + PIN_IN(gpk2-0, DOWN, LV1); + PIN_IN(gpk2-1, DOWN, LV1); + PIN_IN(gpk2-2, DOWN, LV1); + PIN_IN(gpk2-3, DOWN, LV1); + PIN_IN(gpk2-4, DOWN, LV1); + PIN_IN(gpk2-5, DOWN, LV1); + PIN_IN(gpk2-6, DOWN, LV1); + }; sleep1: sleep-state { PIN_SLP(gpe0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index 5ab81c39e2c9..40ea7de44933 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -16,11 +16,49 @@ #define PIN_PULL_DOWN 1 #define PIN_PULL_UP 3 +#define PIN_DRV_LV1 0 +#define PIN_DRV_LV2 2 +#define PIN_DRV_LV3 1 +#define PIN_DRV_LV4 3 + #define PIN_PDN_OUT0 0 #define PIN_PDN_OUT1 1 #define PIN_PDN_INPUT 2 #define PIN_PDN_PREV 3 +#define PIN_IN(_pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <0>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +#define PIN_OUT(_pin, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <1>; \ + samsung,pin-pud = <0>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +#define PIN_OUT_SET(_pin, _val, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <1>; \ + samsung,pin-pud = <0>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + samsung,pin-val = <_val>; \ + } + +#define PIN_CFG(_pin, _sel, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <_sel>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + #define PIN_SLP(_pin, _mode, _pull) \ _pin { \ samsung,pins = #_pin; \ @@ -120,6 +158,13 @@ samsung,pin-drv = <0>; }; + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; @@ -445,6 +490,41 @@ samsung,pin-drv = <3>; }; + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + cam_port_b_io: cam-port-b-io { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f102f3a1ab1..31eb09bae0a2 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -681,7 +681,21 @@ &pinctrl_0 { pinctrl-names = "default"; - pinctrl-0 = <&sleep0>; + pinctrl-0 = <&initial0 &sleep0>; + + initial0: initial-state { + PIN_IN(gpa1-4, DOWN, LV1); + PIN_IN(gpa1-5, DOWN, LV1); + + PIN_IN(gpc0-0, DOWN, LV1); + PIN_IN(gpc0-1, DOWN, LV1); + PIN_IN(gpc0-2, DOWN, LV1); + PIN_IN(gpc0-3, DOWN, LV1); + PIN_IN(gpc0-4, DOWN, LV1); + + PIN_IN(gpd0-0, DOWN, LV1); + PIN_IN(gpd0-1, DOWN, LV1); + }; sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, DOWN); @@ -735,7 +749,60 @@ &pinctrl_1 { pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; + pinctrl-0 = <&initial1 &sleep1>; + + initial1: initial-state { + PIN_IN(gpe0-6, DOWN, LV1); + PIN_IN(gpe0-7, DOWN, LV1); + + PIN_IN(gpe1-0, DOWN, LV1); + PIN_IN(gpe1-3, DOWN, LV1); + PIN_IN(gpe1-4, DOWN, LV1); + PIN_IN(gpe1-5, DOWN, LV1); + PIN_IN(gpe1-6, DOWN, LV1); + + PIN_IN(gpk2-0, DOWN, LV1); + PIN_IN(gpk2-1, DOWN, LV1); + PIN_IN(gpk2-2, DOWN, LV1); + PIN_IN(gpk2-3, DOWN, LV1); + PIN_IN(gpk2-4, DOWN, LV1); + PIN_IN(gpk2-5, DOWN, LV1); + PIN_IN(gpk2-6, DOWN, LV1); + + PIN_IN(gpm0-0, DOWN, LV1); + PIN_IN(gpm0-1, DOWN, LV1); + PIN_IN(gpm0-2, DOWN, LV1); + PIN_IN(gpm0-3, DOWN, LV1); + PIN_IN(gpm0-4, DOWN, LV1); + PIN_IN(gpm0-5, DOWN, LV1); + PIN_IN(gpm0-6, DOWN, LV1); + PIN_IN(gpm0-7, DOWN, LV1); + + PIN_IN(gpm1-0, DOWN, LV1); + PIN_IN(gpm1-1, DOWN, LV1); + PIN_IN(gpm1-2, DOWN, LV1); + PIN_IN(gpm1-3, DOWN, LV1); + PIN_IN(gpm1-4, DOWN, LV1); + PIN_IN(gpm1-5, DOWN, LV1); + PIN_IN(gpm1-6, DOWN, LV1); + + PIN_IN(gpm2-0, DOWN, LV1); + PIN_IN(gpm2-1, DOWN, LV1); + + PIN_IN(gpm3-0, DOWN, LV1); + PIN_IN(gpm3-1, DOWN, LV1); + PIN_IN(gpm3-2, DOWN, LV1); + PIN_IN(gpm3-3, DOWN, LV1); + PIN_IN(gpm3-4, DOWN, LV1); + + PIN_IN(gpm4-1, DOWN, LV1); + PIN_IN(gpm4-2, DOWN, LV1); + PIN_IN(gpm4-3, DOWN, LV1); + PIN_IN(gpm4-4, DOWN, LV1); + PIN_IN(gpm4-5, DOWN, LV1); + PIN_IN(gpm4-6, DOWN, LV1); + PIN_IN(gpm4-7, DOWN, LV1); + }; sleep1: sleep-state { PIN_SLP(gpe0-0, PREV, NONE); diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 137f9015d4e8..094782b207ee 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -31,6 +31,7 @@ pinctrl1 = &pinctrl_1; mshc0 = &mshc_0; mshc1 = &mshc_1; + mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -43,6 +44,7 @@ i2c7 = &i2c_7; serial0 = &serial_0; serial1 = &serial_1; + serial2 = &serial_2; }; cpus { @@ -153,7 +155,7 @@ interrupt-parent = <&gic>; }; - mipi_phy: video-phy@10020710 { + mipi_phy: video-phy { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; syscon = <&pmu_system_controller>; @@ -357,6 +359,18 @@ status = "disabled"; }; + mshc_2: mshc@12530000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12530000 0x1000>; + interrupts = <0 144 0>; + clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + exynos_usbphy: exynos-usbphy@125B0000 { compatible = "samsung,exynos3250-usb2-phy"; reg = <0x125B0000 0x100>; @@ -452,6 +466,17 @@ status = "disabled"; }; + serial_2: serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 111 0>; + clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + status = "disabled"; + }; + i2c_0: i2c@13860000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index c679b3cc3c48..ca8f3e3cf2f3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -77,12 +77,12 @@ reg = <0x10000000 0x100>; }; - sromc@12570000 { - compatible = "samsung,exynos-srom"; + memory-controller@12570000 { + compatible = "samsung,exynos4210-srom"; reg = <0x12570000 0x14>; }; - mipi_phy: video-phy@10020710 { + mipi_phy: video-phy { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; syscon = <&pmu_system_controller>; @@ -743,6 +743,18 @@ status = "disabled"; }; + hdmicec: cec@100B0000 { + compatible = "samsung,s5p-cec"; + reg = <0x100B0000 0x200>; + interrupts = <0 114 0>; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; + mixer: mixer@12C10000 { compatible = "samsung,exynos4210-mixer"; interrupts = <0 91 0>; @@ -969,11 +981,18 @@ #iommu-cells = <0>; }; + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + }; + prng: rng@10830400 { compatible = "samsung,exynos4-rng"; reg = <0x10830400 0x200>; clocks = <&clock CLK_SSS>; clock-names = "secss"; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index a7c212891674..9331c6252eff 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -820,6 +820,13 @@ samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 5e5d3fecb04c..cab0f07d7d28 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -188,6 +188,10 @@ status = "okay"; }; +&hdmicec { + status = "okay"; +}; + &hsotg { dr_mode = "peripheral"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index ed017cc7b14f..5d1eaea3f778 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -146,13 +146,13 @@ reg = <0x66>; regulators { - esafeout1_reg: ESAFEOUT1@1 { + esafeout1_reg: ESAFEOUT1 { regulator-name = "ESAFEOUT1"; }; - esafeout2_reg: ESAFEOUT2@2 { + esafeout2_reg: ESAFEOUT2 { regulator-name = "ESAFEOUT2"; }; - charger_reg: CHARGER@0 { + charger_reg: CHARGER { regulator-name = "CHARGER"; regulator-min-microamp = <60000>; regulator-max-microamp = <2580000>; @@ -251,7 +251,7 @@ "SPK", "SPKOUTRP"; }; - thermistor-ap@0 { + thermistor-ap { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ @@ -259,7 +259,7 @@ io-channels = <&adc 1>; /* AP temperature */ }; - thermistor-battery@1 { + thermistor-battery { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ @@ -1234,10 +1234,6 @@ status = "okay"; }; -&prng { - status = "okay"; -}; - &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; @@ -1276,7 +1272,7 @@ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; - s5c73m3_spi: s5c73m3 { + s5c73m3_spi: s5c73m3@0 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index bac25c672789..856b29254374 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -885,6 +885,13 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl_2: pinctrl@03860000 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 84a23f962946..b7490ea0c75c 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -179,7 +179,7 @@ ranges; status = "disabled"; - pmu { + pmu@10020000 { reg = <0x10020000 0x3000>; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 92313cac035e..d5c0f18a4223 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -31,8 +31,8 @@ reg = <0x10000000 0x100>; }; - sromc@12250000 { - compatible = "samsung,exynos-srom"; + memory-controller@12250000 { + compatible = "samsung,exynos4210-srom"; reg = <0x12250000 0x14>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 8b2acc74aa76..1e25152dc0f6 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -133,7 +133,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { /* 2560x1600 DP panel */ clock-frequency = <50000>; hactive = <2560>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 0f5dcd418af8..0e2eb3f6b590 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -29,7 +29,7 @@ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - vdd: fixed-regulator@0 { + vdd: fixed-regulator-vdd { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; regulator-min-microvolt = <1800000>; @@ -37,7 +37,7 @@ regulator-always-on; }; - dbvdd: fixed-regulator@1 { + dbvdd: fixed-regulator-dbvdd { compatible = "regulator-fixed"; regulator-name = "dbvdd-supply"; regulator-min-microvolt = <3300000>; @@ -45,7 +45,7 @@ regulator-always-on; }; - spkvdd: fixed-regulator@2 { + spkvdd: fixed-regulator-spkvdd { compatible = "regulator-fixed"; regulator-name = "spkvdd-supply"; regulator-min-microvolt = <5000000>; @@ -93,7 +93,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { /* 1280x800 */ clock-frequency = <50000>; hactive = <1280>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 95210ef6a6b5..c9889b1f530a 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -84,7 +84,7 @@ sbs,poll-retry-count = <1>; }; - cros_ec: embedded-controller { + cros_ec: embedded-controller@1e { compatible = "google,cros-ec-i2c"; reg = <0x1e>; interrupts = <6 IRQ_TYPE_NONE>; @@ -94,7 +94,7 @@ wakeup-source; }; - power-regulator { + power-regulator@48 { compatible = "ti,tps65090"; reg = <0x48>; @@ -244,7 +244,7 @@ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { - port@0 { + port0 { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -428,7 +428,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - trackpad { + trackpad@67 { reg = <0x67>; compatible = "cypress,cyapa"; interrupts = <2 IRQ_TYPE_NONE>; @@ -487,13 +487,13 @@ edid-emulation = <5>; ports { - port@0 { + port0 { bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port@1 { + port1 { bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 0f500cb1eb2d..273d66282ebc 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -383,7 +383,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - cros_ec: embedded-controller { + cros_ec: embedded-controller@1e { compatible = "google,cros-ec-i2c"; reg = <0x1e>; interrupts = <6 IRQ_TYPE_NONE>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index e653ae04015a..c7158b2fb213 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -596,7 +596,7 @@ pinctrl-0 = <&i2s2_bus>; }; - usb@12000000 { + usb_dwc3 { compatible = "samsung,exynos5250-dwusb3"; clocks = <&clock CLK_USB3>; clock-names = "usbdrd30"; @@ -604,7 +604,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3: dwc3 { + usbdrd_dwc3: dwc3@12000000 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -763,7 +763,7 @@ iommu = <&sysmmu_gsc3>; }; - hdmi: hdmi { + hdmi: hdmi@14530000 { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; power-domains = <&pd_disp1>; @@ -776,7 +776,7 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - mixer { + mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; @@ -787,7 +787,7 @@ iommus = <&sysmmu_tv>; }; - dp_phy: video-phy@10040720 { + dp_phy: video-phy { compatible = "samsung,exynos5250-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index a731fbe28ebc..0f6429e1b75c 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -97,7 +97,7 @@ smsc,irq-push-pull; smsc,force-internal-phy; - samsung,srom-page-mode = <1>; + samsung,srom-page-mode; samsung,srom-timing = <9 12 1 9 1 1>; }; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index fa558674ac76..7a56aec2c5ba 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -102,8 +102,8 @@ reg = <0x10000000 0x100>; }; - sromc: sromc@12250000 { - compatible = "samsung,exynos-srom"; + sromc: memory-controller@12250000 { + compatible = "samsung,exynos4210-srom"; reg = <0x12250000 0x14>; #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index a103ce8c3985..60bc861d0f9d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -75,13 +75,6 @@ s2mps11_pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index e036e6467a7b..8811e170c2af 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -165,7 +165,7 @@ samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { - port@0 { + port0 { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -633,13 +633,13 @@ use-external-pwm; ports { - port@0 { + port0 { bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port@1 { + port1 { bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 0785fedf441e..9b77940c9201 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -111,7 +111,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { clock-frequency = <50000>; hactive = <2560>; vactive = <1600>; @@ -142,13 +142,6 @@ s2mps11_pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; s2mps11_osc: clocks { #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7b99cb58d82d..4c8523471c65 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -551,13 +551,13 @@ clock-names = "timers"; }; - dp_phy: video-phy@10040728 { + dp_phy: dp-video-phy { compatible = "samsung,exynos5420-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; - mipi_phy: video-phy@10040714 { + mipi_phy: mipi-video-phy { compatible = "samsung,s5pv210-mipi-video-phy"; syscon = <&pmu_system_controller>; #phy-cells = <1>; @@ -913,7 +913,7 @@ clock-names = "secss"; }; - usbdrd3_0: usb@12000000 { + usbdrd3_0: usb3-0 { compatible = "samsung,exynos5250-dwusb3"; clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; @@ -921,7 +921,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_0: dwc3 { + usbdrd_dwc3_0: dwc3@12000000 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -939,7 +939,7 @@ #phy-cells = <1>; }; - usbdrd3_1: usb@12400000 { + usbdrd3_1: usb3-1 { compatible = "samsung,exynos5250-dwusb3"; clocks = <&clock CLK_USBD301>; clock-names = "usbdrd30"; @@ -947,7 +947,7 @@ #size-cells = <1>; ranges; - usbdrd_dwc3_1: dwc3 { + usbdrd_dwc3_1: dwc3@12400000 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; interrupts = <0 73 0>; @@ -1199,6 +1199,7 @@ }; &fimd { + compatible = "samsung,exynos5420-fimd"; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; power-domains = <&disp_pd>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1bd507bfa750..20fa7612080d 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -92,13 +92,6 @@ s2mps11_pmic@66 { compatible = "samsung,s2mps11-pmic"; reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; samsung,s2mps11-acokb-ground; interrupt-parent = <&gpx0>; @@ -121,10 +114,9 @@ }; ldo3_reg: LDO3 { - regulator-name = "vdd_ldo3"; + regulator-name = "vddq_mmc0"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; }; ldo5_reg: LDO5 { @@ -184,10 +176,9 @@ }; ldo13_reg: LDO13 { - regulator-name = "vdd_ldo13"; + regulator-name = "vddq_mmc2"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; ldo15_reg: LDO15 { @@ -211,11 +202,16 @@ regulator-always-on; }; + ldo18_reg: LDO18 { + regulator-name = "vdd_emmc_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo19_reg: LDO19 { regulator-name = "vdd_sd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; ldo24_reg: LDO24 { @@ -347,6 +343,8 @@ cap-mmc-highspeed; mmc-hs200-1_8v; mmc-hs400-1_8v; + vmmc-supply = <&ldo18_reg>; + vqmmc-supply = <&ldo3_reg>; }; &mmc_2 { @@ -359,6 +357,8 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; }; &pinctrl_0 { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index b9342ec5b9cf..fd176819b4bf 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -132,7 +132,7 @@ clock-names = "spi", "spi_busclk0"; }; - pin_ctrl: pinctrl { + pin_ctrl: pinctrl@E0000 { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, @@ -205,7 +205,7 @@ ranges; }; - rtc { + rtc@130000 { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 848ffa785b63..f96fa2df8f11 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -110,20 +110,20 @@ #define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000 #define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000 -#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x10 0x000 +#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000 #define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 -#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x13 0x000 -#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x15 0x000 +#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000 +#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000 #define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000 #define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000 #define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000 -#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000 +#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x13 0x000 #define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000 #define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000 -#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000 +#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x13 0x000 #define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000 #define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 @@ -237,17 +237,21 @@ #define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000 #define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 +#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x12 0x000 #define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 #define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 #define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 +#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x12 0x000 #define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 #define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 -#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000 -#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001 +#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000 +#define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000 +#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x05 0x001 #define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 +#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x12 0x000 #define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 #define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 @@ -291,22 +295,22 @@ #define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001 #define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 -#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x11 0x001 #define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 #define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 -#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x11 0x000 #define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 -#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000 -#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001 +#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x00 0x000 +#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001 #define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000 -#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000 -#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 +#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000 +#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 #define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000 @@ -360,7 +364,7 @@ #define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x000 0x12 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x12 0x000 #define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 @@ -371,10 +375,10 @@ #define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 -#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x11 0x001 -#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x01 0x001 +#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x05 0x000 #define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 #define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 @@ -383,20 +387,24 @@ #define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 #define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000 -#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000 -#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000 +#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x00 0x000 +#define MX25_PAD_UART1_RXD__UART2_DTR 0x170 0x368 0x000 0x03 0x000 +#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x05 0x000 -#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000 -#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000 +#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x00 0x000 +#define MX25_PAD_UART1_TXD__UART2_DSR 0x174 0x36c 0x000 0x03 0x000 +#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x05 0x000 -#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 -#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 -#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x12 0x000 -#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 +#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x00 0x000 +#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x01 0x001 +#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x02 0x000 +#define MX25_PAD_UART1_RTS__UART2_DCD 0x178 0x370 0x000 0x03 0x000 +#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x05 0x000 -#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 -#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001 -#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000 +#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x00 0x000 +#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x01 0x001 +#define MX25_PAD_UART1_CTS__UART2_RI 0x17c 0x374 0x000 0x03 0x001 +#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x05 0x000 #define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000 #define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000 @@ -404,10 +412,10 @@ #define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000 #define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000 -#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 -#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 -#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 -#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 +#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000 +#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002 +#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000 +#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000 #define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002 @@ -439,36 +447,42 @@ #define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 -#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x14 0x000 -#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000 +#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x00 0x000 +#define MX25_PAD_KPP_ROW0__UART3_RXD 0x1a8 0x3a0 0x568 0x01 0x001 +#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x04 0x000 +#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x05 0x000 -#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000 +#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x00 0x000 +#define MX25_PAD_KPP_ROW1__UART3_TXD 0x1ac 0x3a4 0x000 0x01 0x000 +#define MX25_PAD_KPP_ROW1__UART1_DSR 0x1ac 0x3a4 0x000 0x04 0x000 +#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x05 0x000 -#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002 -#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x14 0x000 -#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000 +#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x00 0x000 +#define MX25_PAD_KPP_ROW2__UART3_RTS 0x1b0 0x3a8 0x000 0x01 0x000 +#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x03 0x002 +#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x04 0x000 +#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x05 0x000 -#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000 -#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002 -#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000 +#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x00 0x000 +#define MX25_PAD_KPP_ROW3__UART3_CTS 0x1b4 0x3ac 0x000 0x01 0x000 +#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x03 0x002 +#define MX25_PAD_KPP_ROW3__UART1_RI 0x1b4 0x3ac 0x000 0x04 0x000 +#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x05 0x000 #define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001 +#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x11 0x001 #define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000 #define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000 #define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000 +#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x11 0x000 #define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000 #define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000 -#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000 -#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x56c 0x01 0x001 +#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x05 0x000 #define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000 #define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000 @@ -557,9 +571,10 @@ #define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000 #define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000 -#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000 -#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000 -#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000 +#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x00 0x000 +#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x04 0x000 +#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x05 0x000 +#define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002 #define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 #define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 @@ -567,6 +582,7 @@ #define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000 #define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001 #define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000 +#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x16 0x000 #define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000 #define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000 diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 759cc56253dd..6cebaa6b8833 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -27,32 +27,6 @@ pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; - - partition@0 { - label = "bootloader"; - reg = <0x00000000 0x00300000>; - read-only; - }; - - partition@1 { - label = "environment"; - reg = <0x00300000 0x00080000>; - }; - - partition@2 { - label = "redundant-environment"; - reg = <0x00380000 0x00080000>; - }; - - partition@3 { - label = "kernel"; - reg = <0x00400000 0x00400000>; - }; - - partition@4 { - label = "filesystem"; - reg = <0x00800000 0x0f800000>; - }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index f637ec900cc8..74aa151cdb45 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -434,6 +434,32 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; + mac0_pins_b: mac0@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_ENET0_MDC__ENET0_MDC + MX28_PAD_ENET0_MDIO__ENET0_MDIO + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN + MX28_PAD_ENET0_RXD0__ENET0_RXD0 + MX28_PAD_ENET0_RXD1__ENET0_RXD1 + MX28_PAD_ENET0_RXD2__ENET0_RXD2 + MX28_PAD_ENET0_RXD3__ENET0_RXD3 + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN + MX28_PAD_ENET0_TXD0__ENET0_TXD0 + MX28_PAD_ENET0_TXD1__ENET0_TXD1 + MX28_PAD_ENET0_TXD2__ENET0_TXD2 + MX28_PAD_ENET0_TXD3__ENET0_TXD3 + MX28_PAD_ENET_CLK__CLKCTRL_ENET + MX28_PAD_ENET0_COL__ENET0_COL + MX28_PAD_ENET0_CRS__ENET0_CRS + MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK + MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + mac1_pins_a: mac1@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 5fdb222636a7..1ce7ae94e7ad 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -69,6 +69,14 @@ status = "disabled"; }; + kpp: kpp@43fa8000 { + compatible = "fsl,imx31-kpp", "fsl,imx21-kpp"; + reg = <0x43fa8000 0x4000>; + interrupts = <24>; + clocks = <&clks 46>; + status = "disabled"; + }; + uart4: serial@43fb0000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43fb0000 0x4000>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 14e1320d9f84..490b7b44f1e7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -137,6 +137,14 @@ status = "disabled"; }; + kpp: kpp@43fa8000 { + compatible = "fsl,imx35-kpp", "fsl,imx21-kpp"; + reg = <0x43fa8000 0x4000>; + interrupts = <24>; + clocks = <&clks 56>; + status = "disabled"; + }; + iomuxc: iomuxc@43fac000 { compatible = "fsl,imx35-iomuxc"; reg = <0x43fac000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 53f40885c530..dcee1e0f968f 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -84,6 +84,15 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio1 2 0>; }; + + reg_usb_otg_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 0>; + }; }; sound { @@ -168,6 +177,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX53_PAD_GPIO_4__GPIO1_4 0x000b0 + >; + }; + led_pin_gpio: led_gpio@0 { fsl,pins = < MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 @@ -351,6 +366,10 @@ }; &usbotg { - dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 5111f5170d53..bfbed52ce1bd 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -114,7 +114,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index 913bb9a0466a..063fe7510da5 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts new file mode 100644 index 000000000000..ff8f7b1c4282 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts @@ -0,0 +1,237 @@ +/* + * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8034 Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + ipu1 = &ipu1; + }; + + cpus { + /delete-node/ cpu@1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&pinctrl_usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ + >; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd0_pwr { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts new file mode 100644 index 000000000000..f988950e9443 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts @@ -0,0 +1,253 @@ +/* + * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8035 Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + ipu1 = &ipu1; + }; + + cpus { + /delete-node/ cpu@1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd0_pwr { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index 5fe465c2814e..b7a72840b7f0 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts new file mode 100644 index 000000000000..4d3204a56f46 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts @@ -0,0 +1,248 @@ +/* + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8033 Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd0_pwr { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index d35a5cdc3229..5e0c6bb49f37 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -81,16 +111,6 @@ }; }; -&iomuxc { - imx6dl-tx6u-811x { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; - }; -}; - &kpp { status = "disabled"; /* pad conflict with backlight1 PWM */ }; @@ -148,3 +168,11 @@ &pwm1 { status = "okay"; }; + +&iomuxc { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts new file mode 100644 index 000000000000..b9a783f7160e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts @@ -0,0 +1,255 @@ +/* + * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&i2c3 { + polytouch1: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; +}; + +&kpp { + status = "disabled"; /* pads partially clash with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds0_timing1>; + + lvds0_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + lvds0_timing1: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + lvds0_timing2: nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds1_timing2>; + + lvds1_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + lvds1_timing1: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + lvds1_timing2: nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index c13a73aa55ca..9a4c22c2dade 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -30,7 +30,7 @@ /* kHz uV */ 996000 1250000 792000 1175000 - 396000 1075000 + 396000 1150000 >; fsl,soc-operating-points = < /* ARM kHz SOC-PU uV */ diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 2cba82d0d859..8e3e1466cc6f 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -80,6 +80,47 @@ }; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -169,6 +210,10 @@ }; }; +&ipu1_di0_disp1 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 3101be5bafa7..f0a2be5268e3 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -65,11 +65,14 @@ }; }; -&ldb { +&clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ldb { status = "okay"; lvds0: lvds-channel@0 { diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 823f55ccb60f..33cb71acadcc 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -65,11 +65,14 @@ }; }; -&ldb { +&clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ldb { status = "okay"; lvds0: lvds-channel@0 { diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 984d00000403..167f7446722a 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -51,25 +51,20 @@ chosen { stdout-path = &uart3; }; +}; - panel-lvds0 { - compatible = "auo,b133htn01"; - backlight = <&backlight_lvds>; - ddc-i2c-bus = <&mux2_i2c2>; - - port { - panel_in_lvds0: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; }; &ldb { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; fsl,dual-channel; status = "okay"; @@ -77,14 +72,6 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in_lvds0>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 8f6e6035f3f7..f7e17e2004ac 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -323,6 +323,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + fsl,tx-swing-full = <103>; + fsl,tx-swing-low = <103>; status = "okay"; }; @@ -335,7 +337,7 @@ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - status = "okay"; + status = "disabled"; }; &sata { @@ -390,7 +392,6 @@ pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; bus-width = <8>; vmmc-supply = <&vdd_bperi>; - vqmmc-supply = <&vdd_bio>; non-removable; keep-power-in-suspend; status = "okay"; @@ -399,6 +400,7 @@ &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index a51834e1dd27..0511137d1e23 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -327,7 +327,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <&sw4_reg>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts new file mode 100644 index 000000000000..3f8013c85fb9 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -0,0 +1,403 @@ +/* + * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com) + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Embest MarS Board i.MX6Dual"; + compatible = "embest,imx6q-marsboard", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user1 { + label = "imx6:green:user1"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + user2 { + label = "imx6:green:user2"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + fsl,spi-num-chipselects = <1>; + status = "okay"; + + m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&iomuxc { + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000b1 /* CS0 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* RGMII_nRST */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* LED1 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* LED2 */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* USB OTG POWER ENABLE */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* WP */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17009 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10009 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17009 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17009 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17009 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17009 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17009 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 0da81bc2c68a..1926b1348a62 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -141,7 +141,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -159,7 +159,7 @@ status = "okay"; sgtl5000: sgtl5000@0a { - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index b18fae10b2e3..65e95ae7509a 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index b58ec9c966c8..20cd0e7b3e21 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index 0bb9a9de62a9..9ed243b704ff 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -94,22 +124,6 @@ status = "disabled"; }; -&iomuxc { - imx6qdl-tx6 { - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 - MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 - >; - }; - }; -}; - &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -134,3 +148,17 @@ fsl,wp-controller; status = "okay"; }; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index b96d80a35d39..347b531d3763 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -180,22 +210,6 @@ status = "disabled"; }; -&iomuxc { - imx6qdl-tx6 { - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 - MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 - >; - }; - }; -}; - &ipu1_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -208,3 +222,17 @@ fsl,wp-controller; status = "okay"; }; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts new file mode 100644 index 000000000000..7c152e32758c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts @@ -0,0 +1,252 @@ +/* + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1036 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&ipu2 { + status = "disabled"; +}; + +®_lcd0_pwr { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 2792da93db1f..0433e220a931 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -81,16 +111,6 @@ }; }; -&iomuxc { - imx6q-tx6q-1110 { - pinctrl_eeti: eetigrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ - >; - }; - }; -}; - &kpp { status = "disabled"; /* pad conflict with backlight1 PWM */ }; @@ -152,3 +172,11 @@ &sata { status = "okay"; }; + +&iomuxc { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts new file mode 100644 index 000000000000..d78b129d01ea --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts @@ -0,0 +1,264 @@ +/* + * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &lvds0; + ipu1 = &ipu2; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&i2c3 { + polytouch1: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; +}; + +&ipu2 { + status = "disabled"; +}; + +&kpp { + status = "disabled"; /* pads partially clash with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds0_timing1>; + + lvds0_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + lvds0_timing1: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + lvds0_timing2: nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds1_timing2>; + + lvds1_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + lvds1_timing1: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <31>; + vfront-porch = <12>; + hsync-len = <96>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + lvds1_timing2: nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hfront-porch = <50>; + vback-porch = <5>; + vfront-porch = <5>; + hsync-len = <60>; + vsync-len = <13>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&iomuxc { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index cd10c8de1904..c30c8368cae0 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -154,22 +154,22 @@ #size-cells = <0>; reg = <2>; - ipu2_di0_disp0: endpoint@0 { + ipu2_di0_disp0: disp0-endpoint { }; - ipu2_di0_hdmi: endpoint@1 { + ipu2_di0_hdmi: hdmi-endpoint { remote-endpoint = <&hdmi_mux_2>; }; - ipu2_di0_mipi: endpoint@2 { + ipu2_di0_mipi: mipi-endpoint { remote-endpoint = <&mipi_mux_2>; }; - ipu2_di0_lvds0: endpoint@3 { + ipu2_di0_lvds0: lvds0-endpoint { remote-endpoint = <&lvds0_mux_2>; }; - ipu2_di0_lvds1: endpoint@4 { + ipu2_di0_lvds1: lvds1-endpoint { remote-endpoint = <&lvds1_mux_2>; }; }; @@ -179,19 +179,19 @@ #size-cells = <0>; reg = <3>; - ipu2_di1_hdmi: endpoint@1 { + ipu2_di1_hdmi: hdmi-endpoint { remote-endpoint = <&hdmi_mux_3>; }; - ipu2_di1_mipi: endpoint@2 { + ipu2_di1_mipi: mipi-endpoint { remote-endpoint = <&mipi_mux_3>; }; - ipu2_di1_lvds0: endpoint@3 { + ipu2_di1_lvds0: lvds0-endpoint { remote-endpoint = <&lvds0_mux_3>; }; - ipu2_di1_lvds1: endpoint@4 { + ipu2_di1_lvds1: lvds1-endpoint { remote-endpoint = <&lvds1_mux_3>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index b33e5a95a0f0..922b1dd06fda 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -324,7 +324,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index a8f3500ee522..865c9a264a43 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -213,7 +213,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 8dd74e98ffd6..7191b84770b9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -244,7 +244,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index ec3fe7444e15..40d06b09deba 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -237,7 +237,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 367cc49eea0d..d6dbe2a88ee6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -328,7 +328,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <&sw4_reg>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 24d7d3f18464..e456b5cc1b03 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -269,7 +269,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index dc74aa395ff5..657da6b6ccd2 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -402,7 +402,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index c6c590d1e940..73915db704a0 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -304,7 +304,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index a50356243888..cacf5933707d 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -126,7 +126,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 0f1aca450fe6..c47fe6c79b36 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -290,7 +290,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0b5c4de74485..5248e7bd2b06 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -115,7 +115,7 @@ mux-ext-port = <3>; }; - backlight { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -133,6 +133,17 @@ default-state = "on"; }; }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &audmux { @@ -509,18 +520,11 @@ fsl,data-width = <18>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index efd06b576f1d..39b85aef93e1 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -1,12 +1,42 @@ /* - * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -37,6 +67,7 @@ clocks { #address-cells = <1>; #size-cells = <0>; + mclk: clock@0 { compatible = "fixed-clock"; reg = <0>; @@ -61,109 +92,95 @@ user_led: user { label = "Heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_led>; gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3v3_etn: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3V3_ETN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etnphy_power>; - gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_3v3_etn: regulator-3v3-etn { + compatible = "regulator-fixed"; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_2v5: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - reg_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_can_xcvr: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; - }; + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; - reg_lcd0_pwr: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "LCD0 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; + reg_lcd0_pwr: regulator-lcd0-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; - reg_lcd1_pwr: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD1 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd1_pwr>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; + reg_lcd1_pwr: regulator-lcd1-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; - reg_usbh1_vbus: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_vbus>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usbotg_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "usbotg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_vbus>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -209,7 +226,7 @@ &gpio2 30 GPIO_ACTIVE_HIGH &gpio3 19 GPIO_ACTIVE_HIGH >; - status = "okay"; + status = "disabled"; spidev0: spi@0 { compatible = "spidev"; @@ -234,8 +251,22 @@ clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + etnphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_mdio>; + interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; + }; + }; }; &gpmi { @@ -301,310 +332,318 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx6qdl-tx6 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ - MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ + >; + }; - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ - MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ - MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ - MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ + >; + }; - pinctrl_disp0_1: disp0grp-1 { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 - >; - }; + pinctrl_disp0_1: disp0grp-1 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; - pinctrl_disp0_2: disp0grp-2 { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 - >; - }; + pinctrl_disp0_2: disp0grp-2 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0 - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0 - MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0 - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */ - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0 + MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */ + >; + }; - pinctrl_edt_ft5x06: edt-ft5x06grp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ - >; - }; + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ + >; + }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; - pinctrl_etnphy_power: etnphy-pwrgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ - >; - }; + pinctrl_enet_mdio: enet-mdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + >; + }; - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 - MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 - >; - }; + pinctrl_etnphy_power: etnphy-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 - >; - }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; - pinctrl_flexcan_xcvr: flexcan-xcvrgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 - >; - }; + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_kpp: kppgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 - MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 - MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 - MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 - MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 - MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 - MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 - MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_lcd0_pwr: lcd0-pwrgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ - >; - }; + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 + MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 + MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 + MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 + MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 + >; + }; - pinctrl_lcd1_pwr: lcd1-pwrgrp { - fsl,pins = < - MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ - >; - }; + pinctrl_lcd0_pwr: lcd0-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 - >; - }; + pinctrl_lcd1_pwr: lcd-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ + >; + }; - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; - pinctrl_tsc2007: tsc2007grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ - >; - }; + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_tsc2007: tsc2007grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ + >; + }; - pinctrl_uart1_rtscts: uart1_rtsctsgrp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 - MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart1_rtscts: uart1_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 + >; + }; - pinctrl_uart2_rtscts: uart2_rtsctsgrp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 - MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; + pinctrl_uart2_rtscts: uart2_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; - pinctrl_uart3_rtscts: uart3_rtsctsgrp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usbh1_vbus: usbh1-vbusgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ - >; - }; + pinctrl_uart3_rtscts: uart3_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 - >; - }; + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ + >; + }; - pinctrl_usbotg_vbus: usbotg-vbusgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 - MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ - >; - }; + pinctrl_usbotg_vbus: usbotg-vbusgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1 - MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1 + MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ + >; + }; + + pinctrl_user_led: user-ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ + >; }; }; @@ -649,19 +688,22 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; + fsl,uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; + fsl,uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; + fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index d3e54e40a017..3bee2f910067 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -10,14 +10,49 @@ */ / { + aliases { + backlight = &backlight; + panelchan = &panelchan; + panel7 = &panel7; + touchscreenp7 = &touchscreenp7; + }; + chosen { stdout-path = &uart2; }; + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio1 4 0>; + default-on; + status = "disabled"; + }; + memory { reg = <0x10000000 0x40000000>; }; + panel7: panel7 { + /* + * in reality it is a -20t (parallel) model, + * but with LVDS bridge chip attached, + * so it is equivalent to -19t model in drive + * characteristics + */ + compatible = "urt,umsh-8596md-19t"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel>; + power-supply = <®_panel>; + backlight = <&backlight>; + status = "disabled"; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -33,6 +68,14 @@ startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ gpio = <&gpio7 12 0>; }; + + reg_panel: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "lcd_panel"; + enable-active-high; + gpio = <&gpio1 2 0>; + }; }; sound { @@ -67,6 +110,24 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreenp7: touchscreenp7@55 { + compatible = "sitronix,st1232"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreenp7>; + reg = <0x55>; + interrupt-parent = <&gpio1>; + interrupts = <13 8>; + gpios = <&gpio1 15 0>; + status = "disabled"; + }; +}; + &iomuxc { imx6q-udoo { pinctrl_enet: enetgrp { @@ -97,6 +158,27 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70 + >; + }; + + pinctrl_touchscreenp7: touchscreenp7grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 @@ -154,6 +236,20 @@ }; }; +&ldb { + status = "okay"; + + panelchan: lvds-channel@0 { + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -164,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 9e096d811bed..8e7c40e114dd 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -85,7 +85,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 201>; + clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b42822aa14f2..ed613ebe0812 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -621,7 +621,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1@110 { + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -635,7 +635,7 @@ anatop-max-voltage = <1375000>; }; - regulator-3p0@120 { + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -649,7 +649,7 @@ anatop-max-voltage = <3400000>; }; - regulator-2p5@130 { + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2000000>; @@ -663,7 +663,7 @@ anatop-max-voltage = <2750000>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -680,7 +680,7 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu@140 { + reg_pu: regulator-vddpu { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -697,7 +697,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -1230,22 +1230,22 @@ #size-cells = <0>; reg = <2>; - ipu1_di0_disp0: endpoint@0 { + ipu1_di0_disp0: disp0-endpoint { }; - ipu1_di0_hdmi: endpoint@1 { + ipu1_di0_hdmi: hdmi-endpoint { remote-endpoint = <&hdmi_mux_0>; }; - ipu1_di0_mipi: endpoint@2 { + ipu1_di0_mipi: mipi-endpoint { remote-endpoint = <&mipi_mux_0>; }; - ipu1_di0_lvds0: endpoint@3 { + ipu1_di0_lvds0: lvds0-endpoint { remote-endpoint = <&lvds0_mux_0>; }; - ipu1_di0_lvds1: endpoint@4 { + ipu1_di0_lvds1: lvds1-endpoint { remote-endpoint = <&lvds1_mux_0>; }; }; @@ -1255,22 +1255,22 @@ #size-cells = <0>; reg = <3>; - ipu1_di0_disp1: endpoint@0 { + ipu1_di0_disp1: disp1-endpoint { }; - ipu1_di1_hdmi: endpoint@1 { + ipu1_di1_hdmi: hdmi-endpoint { remote-endpoint = <&hdmi_mux_1>; }; - ipu1_di1_mipi: endpoint@2 { + ipu1_di1_mipi: mipi-endpoint { remote-endpoint = <&mipi_mux_1>; }; - ipu1_di1_lvds0: endpoint@3 { + ipu1_di1_lvds0: lvds0-endpoint { remote-endpoint = <&lvds0_mux_1>; }; - ipu1_di1_lvds1: endpoint@4 { + ipu1_di1_lvds1: lvds1-endpoint { remote-endpoint = <&lvds1_mux_1>; }; }; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts new file mode 100644 index 000000000000..a39b86036581 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board"; + compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp"; +}; + +&pcie { + status = "disabled"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts new file mode 100644 index 000000000000..ba62348d8284 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -0,0 +1,709 @@ +/* + * Copyright (C) 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx.dtsi" + +/ { + model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board"; + compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; + + aliases { + fb_lcd = &lcdif1; + t_lcd = &t_lcd; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_3p3v>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can1_3v3: regulator-can1-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can1-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + + reg_can2_3v3: regulator-can2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 24 GPIO_ACTIVE_LOW>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wlan>; + compatible = "regulator-fixed"; + clocks = <&clks IMX6SX_CLK_CKO>; + clock-names = "slow"; + regulator-name = "wlan-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6sx-nitrogen6sx-sgtl5000"; + cpu-dai = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0xc0000>; + read-only; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x2000>; + read-only; + }; + + partition@c2000 { + label = "Kernel"; + reg = <0xc2000 0x11e000>; + }; + + partition@1e0000 { + label = "M4"; + reg = <0x1e0000 0x20000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + phy-supply = <®_3p3v>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@4 { + reg = <4>; + }; + + ethphy2: ethernet-phy@5 { + reg = <5>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + phy-supply = <®_3p3v>; + fsl,magic-packet; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_3v3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6SX_CLK_CKO2>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + VDDD-supply = <®_1p8v>; + assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>, + <&clks IMX6SX_CLK_CKO2>; + assigned-clock-parents = <&clks IMX6SX_CLK_OSC>; + assigned-clock-rates = <0>, <24000000>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif1>; + lcd-supply = <®_3p3v>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&t_lcd>; + t_lcd: t_lcd_default { + clock-frequency = <74160000>; + hactive = <1280>; + vactive = <720>; + hback-porch = <220>; + hfront-porch = <110>; + vback-porch = <20>; + vfront-porch = <5>; + hsync-len = <40>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + disable-over-current; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + vmmc-supply = <®_wlan>; + cap-power-off-card; + cap-sdio-irq; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio7>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio7>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4_50mhz>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0 + MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0 + MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0 + MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0 + MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0 + MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1 + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0 + MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0 + MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0 + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0 + MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0 + MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0 + MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0 + MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0 + MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0 + MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0 + MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0 + /* Test points */ + MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1 + MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 + MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcdif1: lcdif1grp { + fsl,pins = < + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0 + MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0 + MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_reg_wlan: reg-wlangrp { + fsl,pins = < + MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0 + MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0 + MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0 + MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0 + MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1 + MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1 + MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0 + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1-vbusgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071 + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071 + >; + }; + + pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071 + MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts new file mode 100644 index 000000000000..0155450d680e --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2016 NXP Semiconductors + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6sx-sdb.dts" + +/ { + sound { + audio-cpu = <&sai1>; + }; +}; + +&audmux { + /* pin conflict with sai */ + status = "disabled"; +}; + +&sai1 { + status = "okay"; +}; + +&sdma { + gpr = <&gpr>; + /* SDMA event remap for SAI1 */ + fsl,sdma-event-remap = <0 15 1>, <0 16 1>; +}; + +&ssi2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 0ad164ab5729..5bb8fd57e7f5 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -18,12 +18,14 @@ 996000 1250000 792000 1175000 396000 1175000 + 198000 1175000 >; fsl,soc-operating-points = < /* ARM kHz SOC uV */ 996000 1250000 792000 1175000 396000 1175000 + 198000 1175000 >; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index f1d37306e8bf..e5eafe4d9a70 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -254,6 +254,12 @@ status = "okay"; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "disabled"; +}; + &ssi2 { status = "okay"; }; @@ -468,6 +474,16 @@ >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x130b0 + MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x130b0 + MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x120b0 + MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index a5f76025a0ce..6a993bfda248 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -63,12 +63,14 @@ 996000 1250000 792000 1175000 396000 1075000 + 198000 975000 >; fsl,soc-operating-points = < /* ARM kHz SOC uV */ 996000 1175000 792000 1175000 396000 1175000 + 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX6SX_CLK_ARM>, @@ -970,8 +972,7 @@ <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; - dmas = <&sdma 31 23 0>, <&sdma 32 23 0>; - dma-source = <&gpr 0 15 0 16>; + dmas = <&sdma 31 24 0>, <&sdma 32 24 0>; status = "disabled"; }; @@ -990,8 +991,7 @@ <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "rx", "tx"; - dmas = <&sdma 33 23 0>, <&sdma 34 23 0>; - dma-source = <&gpr 0 17 0 18>; + dmas = <&sdma 33 24 0>, <&sdma 34 24 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 720728001d3c..668a72997590 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -36,6 +36,45 @@ enable-active-high; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "mx6ul-wm8960"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; }; &cpu0 { @@ -43,6 +82,20 @@ soc-supply = <®_soc>; }; +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8960@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8960"; + reg = <0x1a>; + wlf,shared-lrclk; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; @@ -86,6 +139,16 @@ }; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + status = "okay"; +}; + &snvs_poweroff { status = "okay"; }; @@ -272,6 +335,17 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts new file mode 100644 index 000000000000..8ce1fec36e86 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -0,0 +1,516 @@ +/* + * Copyright 2015 Technexion Ltd. + * + * Author: Wig Cheng <wig.cheng@technexion.com> + * Richard Hu <richard.hu@technexion.com> + * Tapani Utriainen <tapani@technexion.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul.dtsi" + +/ { + model = "Technexion Pico i.MX6UL Board"; + compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; + + memory { + reg = <0x80000000 0x10000000>; + }; + + chosen { + stdout-path = &uart6; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 6 0>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6ul-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&codec>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + leds { + compatible = "gpio-leds"; + + hobbitled { + label = "hobbitled"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + phy-reset-duration = <11>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + /* VDD_ARM_SOC_IN*/ + sw1b_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* DRAM */ + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DRAM */ + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: sgtl5000@0a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c3 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <33200000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <46>; + hsync-len = <1>; + vback-porch = <22>; + vfront-porch = <23>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { /* Wifi SDIO */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800 + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0 + MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* LCD reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0 + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts new file mode 100644 index 000000000000..8c2f3df79b47 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include "imx6ul-tx6ul.dtsi" + +/ { + model = "Ka-Ro electronics TXUL-0010 Module"; + compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul"; + + aliases { + /delete-property/ mmc1; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts new file mode 100644 index 000000000000..d82698e7d50f --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include "imx6ul-tx6ul.dtsi" + +/ { + model = "Ka-Ro electronics TXUL-0011 Module"; + compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + }; +}; + +&gpmi { + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + fsl,wp-controller; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts new file mode 100644 index 000000000000..d25899b71575 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -0,0 +1,271 @@ +/* + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include "imx6ul-tx6ul.dtsi" + +/ { + model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard"; + compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul"; + + aliases { + lcdif_24bit_pins_a = &pinctrl_disp0_3; + mmc0 = &usdhc1; + /delete-property/ mmc1; + serial2 = &uart3; + serial4 = &uart5; + }; + /delete-node/ sound; +}; + +&can1 { + xceiver-supply = <®_3v3>; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + status = "disabled"; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-supply = <®_3v3_etn>; + phy-handle = <&etnphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + etnphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy0_int>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + }; + + etnphy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy1_int>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + }; + }; +}; + +&i2c_gpio { + status = "disabled"; +}; + +&i2c2 { + /delete-node/ codec@0a; + /delete-node/ touchscreen@48; + + rtc: mcp7940x@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&kpp { + status = "disabled"; +}; + +&lcdif { + pinctrl-0 = <&pinctrl_disp0_3>; +}; + +®_usbotg_vbus{ + status = "disabled"; +}; + +&usdhc1 { + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + /delete-property/ cd-gpios; + cap-sdio-irq; +}; + +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + /delete-property/ fsl,uart-has-rtscts; +}; + +&uart2 { + pinctrl-0 = <&pinctrl_uart2>; + /delete-property/ fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + status = "disabled"; /* conflicts with LCDIF */ +}; + +&iomuxc { + hoggrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */ + >; + }; + + pinctrl_disp0_3: disp0grp-3 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 + /* LCD_DATA08..09 not wired */ + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 + /* LCD_DATA16..17 not wired */ + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 + >; + }; + + pinctrl_enet2_mdio: enet2-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi new file mode 100644 index 000000000000..437e9aad5920 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -0,0 +1,973 @@ +/* + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + can0 = &can2; + can1 = &can1; + display = &display; + i2c0 = &i2c2; + i2c1 = &i2c_gpio; + i2c2 = &i2c1; + i2c3 = &i2c3; + i2c4 = &i2c4; + lcdif_23bit_pins_a = &pinctrl_disp0_1; + lcdif_24bit_pins_a = &pinctrl_disp0_2; + pwm0 = &pwm5; + reg_can_xcvr = ®_can_xcvr; + serial2 = &uart5; + serial4 = &uart3; + spi0 = &ecspi2; + spi1 = &spi_gpio; + stk5led = &user_led; + usbh1 = &usbotg2; + usbotg = &usbotg1; + }; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0 0>; /* will be filled by U-Boot */ + }; + + clocks { + mclk: mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_rst>; + enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_lcd_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + i2c_gpio: i2c-gpio { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio>; + gpios = < + &gpio5 1 GPIO_ACTIVE_HIGH /* SDA */ + &gpio5 0 GPIO_ACTIVE_HIGH /* SCL */ + >; + clock-frequency = <400000>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + status = "disabled"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led: user { + label = "Heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3_etn: regulator-3v3etn { + compatible = "regulator-fixed"; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: regulator-canxcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; + + reg_lcd_pwr: regulator-lcdpwr { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwr>; + gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator-usbh1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + spi_gpio: spi-gpio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi_gpio>; + gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>; + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + num-chipselects = <2>; + cs-gpios = < + &gpio1 29 GPIO_ACTIVE_HIGH + &gpio1 10 GPIO_ACTIVE_HIGH + >; + status = "disabled"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <660000>; + }; + + spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <660000>; + }; + }; + + sound { + compatible = "karo,imx6ul-tx6ul-sgtl5000", + "simple-audio-card"; + simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + fsl,spi-num-chipselects = <2>; + cs-gpios = < + &gpio1 29 GPIO_ACTIVE_HIGH + &gpio1 10 GPIO_ACTIVE_HIGH + >; + status = "disabled"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <60000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <60000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + phy-supply = <®_3v3_etn>; + phy-handle = <&etnphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + etnphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy0_int>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + }; + + etnphy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy1_int>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-supply = <®_3v3_etn>; + phy-handle = <&etnphy1>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + fsl,no-blockmark-swap; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_2v5>; + VDDIO-supply = <®_3v3>; + clocks = <&mclk>; + }; + + polytouch: polytouch@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + + touchscreen: touchscreen@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_NONE>; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + ti,x-plate-ohms = <660>; + wakeup-source; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + /* sample keymap */ + /* row/col 0..3 are mapped to KPP row/col 4..7 */ + linux,keymap = < + MATRIX_KEY(4, 4, KEY_POWER) + MATRIX_KEY(4, 5, KEY_KP0) + MATRIX_KEY(4, 6, KEY_KP1) + MATRIX_KEY(4, 7, KEY_KP2) + MATRIX_KEY(5, 4, KEY_KP3) + MATRIX_KEY(5, 5, KEY_KP4) + MATRIX_KEY(5, 6, KEY_KP5) + MATRIX_KEY(5, 7, KEY_KP6) + MATRIX_KEY(6, 4, KEY_KP7) + MATRIX_KEY(6, 5, KEY_KP8) + MATRIX_KEY(6, 6, KEY_KP9) + >; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + lcd-supply = <®_lcd_pwr>; + display = <&display>; + status = "okay"; + + display: display@di0 { + bits-per-pixel = <32>; + bus-width = <24>; + status = "okay"; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + #pwm-cells = <3>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbotg_vbus>; + dr_mode = "peripheral"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */ + >; + }; + + pinctrl_disp0_1: disp0grp-1 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ + /* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */ + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 + >; + }; + + pinctrl_disp0_2: disp0grp-2 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x10 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */ + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */ + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x0b0b0 /* CSPI_MOSI */ + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x0b0b0 /* CSPI_MISO */ + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x0b0b0 /* CSPI_SCLK */ + >; + }; + + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* Reset */ + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Wake */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x000b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x000b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x000b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x000b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x000b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x000b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x000b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x000b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x000b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x000b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x000b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x000b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x000b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x000b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x400000b1 + >; + }; + + pinctrl_enet1_mdio: enet1-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_etnphy_power: etnphy-pwrgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 /* ETN PHY POWER */ + >; + }; + + pinctrl_etnphy0_int: etnphy-intgrp-0 { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */ + >; + }; + + pinctrl_etnphy0_rst: etnphy-rstgrp-0 { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */ + >; + }; + + pinctrl_etnphy1_int: etnphy-intgrp-1 { + fsl,pins = < + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */ + >; + }; + + pinctrl_etnphy1_rst: etnphy-rstgrp-1 { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0b0b0 /* Flexcan XCVR enable */ + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c_gpio: i2c-gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x4001b8b1 /* I2C SCL */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x4001b8b1 /* I2C SDA */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b1 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x1b0b0 + >; + }; + + pinctrl_lcd_pwr: lcd-pwrgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 /* LCD Power Enable */ + >; + }; + + pinctrl_lcd_rst: lcd-rstgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 /* LCD Reset */ + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x0b0b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0b0b0 /* SSI1_RXD */ + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0b0b0 /* SSI1_TXD */ + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0b0b0 /* SSI1_CLK */ + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x0b0b0 /* SSI1_FS */ + >; + }; + + pinctrl_spi_gpio: spi-gpiogrp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */ + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */ + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x0b0b0 /* CSPI_MOSI */ + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x0b0b0 /* CSPI_MISO */ + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x0b0b0 /* CSPI_SCLK */ + >; + }; + + pinctrl_tsc2007: tsc2007grp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x1b0b0 /* Interrupt */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0b0b0 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart1_rtscts: uart1-rtsctsgrp { + fsl,pins = < + MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x0b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0b0b0 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart2_rtscts: uart2-rtsctsgrp { + fsl,pins = < + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x0b0b0 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x0b0b0 + MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart5_rtscts: uart5-rtsctsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x0b0b0 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0b0b0 + >; + }; + + pinctrl_usbh1_oc: usbh1-ocgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x17059 /* USBH1_OC */ + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0b0b0 /* USBH1_VBUSEN */ + >; + }; + + pinctrl_usbotg_oc: usbotg-ocgrp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x17059 /* USBOTG_OC */ + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbusgrp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1b0b0 /* USBOTG_VBUSEN */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1 + >; + }; + + pinctrl_usdhc1_cd: usdhc1cdgrp { + fsl,pins = < + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x170b0 /* SD1 CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x070b1 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x070b1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x070b1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x070b1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x070b1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x070b1 + /* eMMC RESET */ + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 71778992f03d..4356b655ef02 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -55,15 +55,15 @@ clock-latency = <61036>; /* two CLK32 periods */ operating-points = < /* kHz uV */ - 528000 1250000 - 396000 1150000 - 198000 1150000 + 528000 1175000 + 396000 1025000 + 198000 950000 >; fsl,soc-operating-points = < /* KHz uV */ - 528000 1250000 - 396000 1150000 - 198000 1150000 + 528000 1175000 + 396000 1175000 + 198000 1175000 >; clocks = <&clks IMX6UL_CLK_ARM>, <&clks IMX6UL_CLK_PLL2_BUS>, diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi index d56d68fe7ffc..d56d68fe7ffc 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index b7e99807f5c2..4c32ebc1425a 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "keystone.dtsi" -#include "k2e.dtsi" +#include "keystone-k2e.dtsi" / { compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index ac990f679725..ac990f679725 100644 --- a/arch/arm/boot/dts/k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 1097dada56d2..96b349fb0430 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -44,7 +44,7 @@ }; soc { - /include/ "k2e-clocks.dtsi" + /include/ "keystone-k2e-clocks.dtsi" usb: usb@2680000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; @@ -145,6 +145,6 @@ clock-names = "fck"; bus_freq = <2500000>; }; - /include/ "k2e-netcp.dtsi" + /include/ "keystone-k2e-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi index af9b7190533a..af9b7190533a 100644 --- a/arch/arm/boot/dts/k2hk-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 8161bf53271b..b38b3441818b 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "keystone.dtsi" -#include "k2hk.dtsi" +#include "keystone-k2hk.dtsi" / { compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index f86d6ddb832b..f86d6ddb832b 100644 --- a/arch/arm/boot/dts/k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index ada4c7ac96e7..8f67fa8df936 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -44,7 +44,7 @@ }; soc { - /include/ "k2hk-clocks.dtsi" + /include/ "keystone-k2hk-clocks.dtsi" dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; @@ -112,6 +112,6 @@ clock-names = "fck"; bus_freq = <2500000>; }; - /include/ "k2hk-netcp.dtsi" + /include/ "keystone-k2hk-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi index ef8464bb11ff..ef8464bb11ff 100644 --- a/arch/arm/boot/dts/k2l-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 00861244d788..7f9c2e94d605 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "keystone.dtsi" -#include "k2l.dtsi" +#include "keystone-k2l.dtsi" / { compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 5acbd0dcc2ab..5acbd0dcc2ab 100644 --- a/arch/arm/boot/dts/k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 4446da72b0ae..ff22ffc3dee7 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -32,7 +32,7 @@ }; soc { - /include/ "k2l-clocks.dtsi" + /include/ "keystone-k2l-clocks.dtsi" uart2: serial@02348400 { compatible = "ns16550a"; @@ -92,7 +92,7 @@ clock-names = "fck"; bus_freq = <2500000>; }; - /include/ "k2l-netcp.dtsi" + /include/ "keystone-k2l-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 3f272826f537..e34b2265458a 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -20,6 +20,9 @@ aliases { serial0 = &uart0; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; }; memory { @@ -59,6 +62,14 @@ <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>; }; + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 9e6e9e2691d5..d573e03f3134 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 7dc7d6782e83..748d0b62f233 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 4680eec990f0..bb63d2d50fc5 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 9e1f741d74ff..720c210d491d 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -1,6 +1,6 @@ / { - mbus { - pciec: pcie-controller { + mbus@f1000000 { + pciec: pcie-controller@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index d2936ad3af1d..d091ecb61cd2 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -33,17 +33,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - /* Wifi model has Atheros chipset on pcie port */ - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { @@ -199,3 +188,11 @@ }; }; +/* Wifi model has Atheros chipset on pcie port */ +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts index fa02a9aff05e..f16a73e49a88 100644 --- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts +++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts @@ -36,13 +36,13 @@ gpio_keys { compatible = "gpio-keys"; - button@1{ + reset { label = "Reset"; linux,code = <KEY_POWER>; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - button@2{ + button { label = "Power"; linux,code = <KEY_SLEEP>; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 7ec76566acf2..555b7e4c58a5 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -60,7 +60,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index c39dd766c75a..aee6f02b1c80 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -17,14 +17,12 @@ / { model = "Marvell DB-88F6281-BP Development Board"; compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; +}; - mbus { - pcie-controller { - status = "okay"; +&pciec { + status = "okay"; +}; - pcie@1,0 { - status = "okay"; - }; - }; - }; +&pcie0 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index 701c6b6cdaa2..e8b23e13ec0c 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -17,18 +17,16 @@ / { model = "Marvell DB-88F6282-BP Development Board"; compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; +}; - mbus { - pcie-controller { - status = "okay"; +&pciec { + status = "okay"; +}; - pcie@1,0 { - status = "okay"; - }; +&pcie0 { + status = "okay"; +}; - pcie@2,0 { - status = "okay"; - }; - }; - }; +&pcie1 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 0473fcc260f7..41acbb6dd6ab 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -25,16 +25,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 =< &pmx_led_usb @@ -203,7 +193,7 @@ }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -276,3 +266,11 @@ &rtc { status = "disabled"; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 113dcf056dcf..d8fca9db46d0 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -13,17 +13,17 @@ &pmx_button_reset>; pinctrl-names = "default"; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; - button@2 { + eject { label = "USB unmount button"; linux,code = <KEY_EJECTCD>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - button@3 { + reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts index 61f47fbe44d0..a85a4664431b 100644 --- a/arch/arm/boot/dts/kirkwood-ds111.dts +++ b/arch/arm/boot/dts/kirkwood-ds111.dts @@ -40,6 +40,6 @@ status = "okay"; }; -&pcie2 { +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index b84af3da8c84..6cef4bdbc01b 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -44,6 +44,10 @@ status = "okay"; }; -&pcie2 { +&pciec { + status = "okay"; +}; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts index 99afd462f956..7f32e7abffac 100644 --- a/arch/arm/boot/dts/kirkwood-ds212.dts +++ b/arch/arm/boot/dts/kirkwood-ds212.dts @@ -43,6 +43,6 @@ status = "okay"; }; -&pcie2 { +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index 623cd4a37d71..72e58307416d 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -48,6 +48,10 @@ status = "okay"; }; -&pcie2 { +&pciec { + status = "okay"; +}; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts index a0a1fad8b4de..aaaf31b81522 100644 --- a/arch/arm/boot/dts/kirkwood-ds411slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts @@ -44,6 +44,6 @@ status = "okay"; }; -&pcie2 { +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index bfa5edde179c..ef84d8699a76 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -62,12 +62,12 @@ pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 38e31d15a62d..d25184ae4af3 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -19,16 +19,6 @@ linux,initrd-end = <0x4800000>; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_reset: pmx-button-reset { @@ -136,13 +126,13 @@ pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; pinctrl-names = "default"; - button@1 { + otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; @@ -194,3 +184,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi index 8367c772c764..7962bdefde49 100644 --- a/arch/arm/boot/dts/kirkwood-km_common.dtsi +++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi @@ -4,16 +4,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; @@ -34,7 +24,7 @@ }; }; - i2c@0 { + i2c { compatible = "i2c-gpio"; gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ @@ -46,3 +36,11 @@ status = "okay"; chip-delay = <25>; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 24425660e973..1b0f070c2676 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -27,15 +27,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { serial@12000 { status = "okay"; @@ -62,7 +53,7 @@ gpio_keys { compatible = "gpio-keys"; - button@1{ + power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -169,3 +160,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 69061b6e987b..36c54c9dfa30 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -49,15 +49,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_power_hdd0: pmx-power-hdd0 { @@ -200,3 +191,11 @@ }; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts new file mode 100644 index 000000000000..345fcac48dc7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -0,0 +1,240 @@ +/* + * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500) + * + * (c) 2013 Jonas Gorski <jogo@openwrt.org> + * (c) 2013 Deutsche Telekom Innovation Laboratories + * (c) 2014 Luka Perkov <luka@openwrt.org> + * (c) 2014 Randy C. Will <randall.will@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Linksys Viper (E4200v2 / EA4500)"; + compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; + pinctrl-names = "default"; + + wps { + label = "WPS Button"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; + pinctrl-names = "default"; + + white-health { + label = "viper:white:health"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + white-pulse { + label = "viper:white:pulse"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; + + dsa { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; + + switch@16,0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <16 0>; /* MDIO address 16, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&pinctrl { + pmx_led_white_health: pmx-led-white-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + pmx_led_white_pulse: pmx-led-white-pulse { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_btn_wps: pmx-btn-wps { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u_env"; + reg = <0x80000 0x20000>; + }; + + partition@A0000 { + label = "s_env"; + reg = <0xA0000 0x20000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x2A0000>; + }; + + partition@4A0000 { + label = "rootfs"; + reg = <0x4A0000 0x1760000>; + }; + + partition@1C00000 { + label = "alt_kernel"; + reg = <0x1C00000 0x2A0000>; + }; + + partition@1EA0000 { + label = "alt_rootfs"; + reg = <0x1EA0000 0x1760000>; + }; + + partition@3600000 { + label = "syscfg"; + reg = <0x3600000 0x4A00000>; + }; + + partition@C0000 { + label = "unused"; + reg = <0xC0000 0x140000>; + }; + + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. + */ +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* eth1 is connected to the switch at port 6. However DSA only supports a + * single CPU port. So leave this port disabled to avoid confusion. + */ +ð1 { + status = "disabled"; +}; + +/* There is no battery on the board, so the RTC does not keep + * time when there is no power, making it useless. + */ +&rtc { + status = "disabled"; +}; + diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 1d6528d82969..8b7c6ce79a41 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -107,18 +107,18 @@ &pmx_power_auto_switch>; pinctrl-names = "default"; - button@1 { + option { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - button@2 { + reserved { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - button@3 { + power { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; @@ -133,28 +133,28 @@ &pmx_led_function_blue>; pinctrl-names = "default"; - led@1 { + func_blue { label = "lsxl:blue:func"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - led@2 { + alarm { label = "lsxl:red:alarm"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - led@3 { + info { label = "lsxl:amber:info"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - led@4 { + power { label = "lsxl:blue:power"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - led@5 { + func_red { label = "lsxl:red:func"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index f3a991837515..aa413b0bcce2 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -17,16 +17,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_led_health: pmx-led-health { @@ -215,3 +205,11 @@ phy-handle = <ðphy1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index b7e7d78c484e..172a38c0b8a9 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -31,16 +31,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pin-controller@10000 { pmx_usb_led: pmx-usb-led { @@ -109,19 +99,19 @@ pinctrl-0 = <&pmx_keys>; pinctrl-names = "default"; - button@1 { + restart { label = "SWR Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - button@2 { + wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <1>; #size-cells = <0>; @@ -179,3 +169,11 @@ duplex = <1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts index 7427ec50b829..f53bcacf6b63 100644 --- a/arch/arm/boot/dts/kirkwood-nas2big.dts +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -28,16 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { rtc@10300 { /* The on-chip RTC is not powered (no supercap). */ @@ -141,3 +131,11 @@ reg = <0x9100000 0x6f00000>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index fd733c63bc27..c0413b63cf2e 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -28,16 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { @@ -193,7 +183,7 @@ #address-cells = <1>; #size-cells = <0>; - usb3_regulator: usb3-regulator { + usb3_regulator: usb3-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "USB 3.0 Power"; @@ -251,3 +241,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index b514d643fb6c..2bfc6cfa151d 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -28,18 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - /* Connected to NEC uPD720200 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { @@ -205,7 +193,7 @@ #address-cells = <1>; #size-cells = <0>; - usb3_regulator: usb3-regulator { + usb3_regulator: usb3-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "USB 3.0 Power"; @@ -265,3 +253,12 @@ phy-handle = <ðphy0>; }; }; + +/* Connected to NEC uPD720200 USB 3.0 controller */ +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index 62515a8b99b9..52b58fe0c4fe 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -59,22 +59,22 @@ #size-cells = <0>; /* - * button@1 and button@2 represent a three position rocker + * esc and power represent a three position rocker * switch. Thus the conventional KEY_POWER does not fit */ - button@1 { + exc { label = "Back power switch (on|auto)"; linux,code = <KEY_ESC>; linux,input-type = <5>; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - button@2 { + power { label = "Back power switch (auto|off)"; linux,code = <KEY_1>; linux,input-type = <5>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - button@3 { + option { label = "Function button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e832b6320264..282605f4c92c 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -57,7 +57,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -83,7 +83,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy { + ethphy0: ethernet-phy@X { /* overwrite reg property in board file */ }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 6139df0f376c..0b69ee4934fa 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -15,16 +15,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_unknown>; @@ -138,3 +128,11 @@ }; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 24f686d1044d..6ab104b4bb42 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -27,16 +27,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-names = "default"; @@ -193,10 +183,19 @@ }; }; + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + /* The following pins are currently not assigned to a driver, some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 + pinctrl-0 = <&pmx_htp &pmx_vid_b1 &pmx_power_resume_data &pmx_power_resume_clk>; */ }; @@ -213,3 +212,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts index bc4ec9332387..36c64816bf7f 100644 --- a/arch/arm/boot/dts/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts @@ -28,16 +28,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-names = "default"; @@ -236,3 +226,10 @@ }; }; +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index 2075a2e828f1..e09b79ac73fd 100644 --- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -4,16 +4,6 @@ / { model = "ZyXEL NSA310"; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { @@ -77,17 +67,17 @@ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; pinctrl-names = "default"; - button@1 { + power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - button@2 { + copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - button@3 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; @@ -157,3 +147,11 @@ reg = <0x5040000 0x2fc0000>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index fb9dc227255d..0db0e3edc88f 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index d5e3bc518968..cf2f5240e176 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -135,7 +135,7 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + button { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index 24f1d30970a0..e4ecab112601 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -25,16 +25,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; @@ -125,3 +115,7 @@ reg = <0x0600000 0x1FA00000>; }; }; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 8082d64266a3..b2f26239d298 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&pmx_button_eject>; pinctrl-names = "default"; - button@1 { + eject { debounce_interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index e0b959396ca2..b8af907249fb 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -29,16 +29,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_usb_power>; @@ -108,4 +98,12 @@ ethernet0-port@0 { phy-handle = <ðphy0>; }; -};
\ No newline at end of file +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts index f2e08b3b33ea..6f771a99cb02 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -19,7 +19,7 @@ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa@0 { + dsa { switch@0 { reg = <10 0>; /* MDIO address 10, switch 0 in tree */ }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index f4272b64ed7f..1a797381d3d4 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -19,7 +19,7 @@ model = "Marvell RD88f6281 Reference design, with Z0 SoC"; compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa@0 { + dsa { switch@0 { reg = <0 0>; /* MDIO address 0, switch 0 in tree */ port@4 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d195e884b3b5..d5aacf137e40 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -25,16 +25,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-names = "default"; @@ -63,7 +53,7 @@ }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -134,3 +124,11 @@ duplex = <1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index 3b19f1fd4cac..2c722ecd5331 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -44,6 +44,10 @@ status = "okay"; }; -&pcie2 { +&pciec { + status = "okay"; +}; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 04015c174b99..65e9524e852a 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -10,20 +10,6 @@ */ / { - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - - pcie2: pcie@2,0 { - status = "disabled"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pmx_alarmled_12: pmx-alarmled-12 { @@ -861,3 +847,11 @@ phy-handle = <ðphy1>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index ed956b849a71..3500f4738fb0 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -30,16 +30,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_i2s &pmx_sysrst>; @@ -173,7 +163,7 @@ pinctrl-0 = <&pmx_button_power>; pinctrl-names = "default"; - button@1 { + power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; @@ -217,7 +207,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy { + ethphy0: ethernet-phy@8 { device_type = "ethernet-phy"; reg = <8>; }; @@ -229,3 +219,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 9767d73f3857..ee62204e4ecd 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -39,12 +39,12 @@ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index bfc1a32d4e42..3437bb396844 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -5,16 +5,6 @@ #include "kirkwood-ts219.dtsi" / { - mbus { - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { pinctrl: pin-controller@10000 { @@ -49,12 +39,12 @@ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; @@ -63,3 +53,5 @@ }; ðphy0 { reg = <0>; }; + +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 0e46560551f4..62e5e2d5c348 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -12,16 +12,6 @@ stdout-path = &uart0; }; - mbus { - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; - }; - ocp@f1000000 { i2c@11000 { status = "okay"; @@ -94,7 +84,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy { + ethphy0: ethernet-phy@X { /* overwrite reg property in board file */ }; }; @@ -105,3 +95,11 @@ phy-handle = <ðphy0>; }; }; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts index d7512d4cdced..e3e71f48acc8 100644 --- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts @@ -16,17 +16,8 @@ #include "kirkwood-ts219.dtsi" #include "kirkwood-ts419.dtsi" -/ { - mbus { - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; -}; - ðphy0 { reg = <0>; }; ðphy1 { reg = <1>; }; + +&pciec { status = "okay"; }; +&pcie1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi index 30ab93bfb1e4..02bd53762705 100644 --- a/arch/arm/boot/dts/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -45,12 +45,12 @@ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - button@1 { + copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7445a15e259d..29b8bd7e0d93 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -27,7 +27,7 @@ i2c0 = &i2c0; }; - mbus { + mbus@f1000000 { compatible = "marvell,kirkwood-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 053a1f54f4bb..fdb736c82045 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -195,13 +195,19 @@ clocks = <&ccu1 CLK_CPU_CREG>; resets = <&rgu 5>; - usb0_otg_phy: phy@004 { + creg_clk: clock-controller { + compatible = "nxp,lpc1850-creg-clk"; + clocks = <&xtal32>; + #clock-cells = <1>; + }; + + usb0_otg_phy: phy { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; - dmamux: dma-mux@11c { + dmamux: dma-mux { compatible = "nxp,lpc1850-dmamux"; #dma-cells = <3>; dma-requests = <64>; @@ -209,11 +215,19 @@ }; }; + rtc: rtc@40046000 { + compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc"; + reg = <0x40046000 0x1000>; + interrupts = <47>; + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; + }; + cgu: clock-controller@40050000 { compatible = "nxp,lpc1850-cgu"; reg = <0x40050000 0x1000>; #clock-cells = <1>; - clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; }; ccu1: clock-controller@40051000 { @@ -430,6 +444,15 @@ status = "disabled"; }; + dac: dac@400e1000 { + compatible = "nxp,lpc1850-dac"; + reg = <0x400e1000 0x1000>; + interrupts = <0>; + clocks = <&ccu1 CLK_APB3_DAC>; + resets = <&rgu 42>; + status = "disabled"; + }; + can0: can@400e2000 { compatible = "bosch,c_can"; reg = <0x400e2000 0x1000>; @@ -439,6 +462,24 @@ status = "disabled"; }; + adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + resets = <&rgu 40>; + status = "disabled"; + }; + + adc1: adc@400e4000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e4000 0x1000>; + interrupts = <21>; + clocks = <&ccu1 CLK_APB3_ADC1>; + resets = <&rgu 41>; + status = "disabled"; + }; + gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; reg = <0x400f4000 0x4000>; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts index a4a281fe82af..52b3ed10283a 100644 --- a/arch/arm/boot/dts/ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -25,119 +25,6 @@ reg = <0x80000000 0x4000000>; }; - ahb { - mac: ethernet@31060000 { - phy-mode = "rmii"; - use-iram; - }; - - /* 128MB Flash via SLC NAND controller */ - slc: flash@20020000 { - status = "okay"; - #address-cells = <1>; - #size-cells = <1>; - - nxp,wdr-clks = <14>; - nxp,wwidth = <260000000>; - nxp,whold = <104000000>; - nxp,wsetup = <200000000>; - nxp,rdr-clks = <14>; - nxp,rwidth = <34666666>; - nxp,rhold = <104000000>; - nxp,rsetup = <200000000>; - nand-on-flash-bbt; - gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ - - mtd0@00000000 { - label = "ea3250-boot"; - reg = <0x00000000 0x00080000>; - read-only; - }; - - mtd1@00080000 { - label = "ea3250-uboot"; - reg = <0x00080000 0x000c0000>; - read-only; - }; - - mtd2@00140000 { - label = "ea3250-kernel"; - reg = <0x00140000 0x00400000>; - }; - - mtd3@00540000 { - label = "ea3250-rootfs"; - reg = <0x00540000 0x07ac0000>; - }; - }; - - apb { - uart5: serial@40090000 { - status = "okay"; - }; - - uart3: serial@40080000 { - status = "okay"; - }; - - uart6: serial@40098000 { - status = "okay"; - }; - - i2c1: i2c@400A0000 { - clock-frequency = <100000>; - - eeprom@50 { - compatible = "at,24c256"; - reg = <0x50>; - }; - - eeprom@57 { - compatible = "at,24c64"; - reg = <0x57>; - }; - - uda1380: uda1380@18 { - compatible = "nxp,uda1380"; - reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; - dac-clk = "wspll"; - }; - - pca9532: pca9532@60 { - compatible = "nxp,pca9532"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x60>; - }; - }; - - i2c2: i2c@400A8000 { - clock-frequency = <100000>; - }; - - sd@20098000 { - wp-gpios = <&pca9532 5 0>; - cd-gpios = <&pca9532 4 0>; - cd-inverted; - bus-width = <4>; - status = "okay"; - }; - }; - - fab { - uart1: serial@40014000 { - status = "okay"; - }; - - /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ - adc@40048000 { - status = "okay"; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -258,12 +145,44 @@ }; }; -/* Here, choose exactly one from: ohci, usbd */ -&ohci /* &usbd */ { - transceiver = <&isp1301>; +/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ +&adc { status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; +}; + &i2cusb { clock-frequency = <100000>; @@ -272,3 +191,82 @@ reg = <0x2d>; }; }; + +&mac { + phy-mode = "rmii"; + use-iram; +}; + +/* Here, choose exactly one from: ohci, usbd */ +&ohci /* &usbd */ { + transceiver = <&isp1301>; + status = "okay"; +}; + +&sd { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; +}; + +/* 128MB Flash via SLC NAND controller */ +&slc { + status = "okay"; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + mtd0@00000000 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@00080000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@00140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@00540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart6 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts new file mode 100644 index 000000000000..fd95e2b10357 --- /dev/null +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -0,0 +1,226 @@ +/* + * PHYTEC phyCORE-LPC3250 board + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "lpc32xx.dtsi" + +/ { + model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; + compatible = "phytec,phy3250", "nxp,lpc3250"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x80000000 0x4000000>; + }; + + regulators { + backlight_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "backlight_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + lcd_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + sd_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "sd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { /* red */ + gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */ + default-state = "off"; + }; + + led1 { /* green */ + gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */ + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clcd { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; +}; + +&i2cusb { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; +}; + +&key { + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + status = "okay"; +}; + +&mac { + phy-mode = "rmii"; + use-iram; +}; + +/* Here, choose exactly one from: ohci, usbd */ +&ohci /* &usbd */ { + transceiver = <&isp1301>; + status = "okay"; +}; + +&sd { + wp-gpios = <&gpio 3 0 0>; + cd-gpios = <&gpio 3 1 0>; + cd-inverted; + bus-width = <4>; + vmmc-supply = <&sd_reg>; + status = "okay"; +}; + +/* 64MB Flash via SLC NAND controller */ +&slc { + status = "okay"; + + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + mtd0@00000000 { + label = "phy3250-boot"; + reg = <0x00000000 0x00064000>; + read-only; + }; + + mtd1@00064000 { + label = "phy3250-uboot"; + reg = <0x00064000 0x00190000>; + read-only; + }; + + mtd2@001f4000 { + label = "phy3250-ubt-prms"; + reg = <0x001f4000 0x00010000>; + }; + + mtd3@00204000 { + label = "phy3250-kernel"; + reg = <0x00204000 0x00400000>; + }; + + mtd4@00604000 { + label = "phy3250-rootfs"; + reg = <0x00604000 0x039fc000>; + }; + }; +}; + +&ssp0 { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 3 5 0>; + status = "okay"; + + eeprom: at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + + pl022,interface = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + }; +}; + +&tsc { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index c58d8da9ea2a..e295e1ec82a5 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -92,7 +92,8 @@ ohci: ohci@0 { compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x0 0x300>; - interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&sic1>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usbclk LPC32XX_USB_CLK_HOST>; status = "disabled"; }; @@ -100,10 +101,11 @@ usbd: usbd@0 { compatible = "nxp,lpc3220-udc"; reg = <0x0 0x300>; - interrupts = <61 IRQ_TYPE_LEVEL_HIGH>, - <62 IRQ_TYPE_LEVEL_HIGH>, - <60 IRQ_TYPE_LEVEL_HIGH>, - <58 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&sic1>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_LOW>; clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; status = "disabled"; }; @@ -111,7 +113,8 @@ i2cusb: i2c@300 { compatible = "nxp,pnx-i2c"; reg = <0x300 0x100>; - interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&sic1>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usbclk LPC32XX_USB_CLK_I2C>; #address-cells = <1>; #size-cells = <0>; @@ -162,30 +165,44 @@ compatible = "simple-bus"; ranges = <0x20000000 0x20000000 0x30000000>; + /* + * ssp0 and spi1 are shared pins; + * enable one in your board dts, as needed. + */ ssp0: ssp@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SSP0>; clock-names = "apb_pclk"; + status = "disabled"; }; spi1: spi@20088000 { compatible = "nxp,lpc3220-spi"; reg = <0x20088000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI1>; + status = "disabled"; }; + /* + * ssp1 and spi2 are shared pins; + * enable one in your board dts, as needed. + */ ssp1: ssp@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SSP1>; clock-names = "apb_pclk"; + status = "disabled"; }; spi2: spi@20090000 { compatible = "nxp,lpc3220-spi"; reg = <0x20090000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI2>; + status = "disabled"; }; i2s0: i2s@20094000 { @@ -249,7 +266,8 @@ i2c1: i2c@400A0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; - interrupts = <51 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&sic1>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; @@ -259,7 +277,8 @@ i2c2: i2c@400A8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; - interrupts = <50 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&sic1>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; @@ -294,22 +313,41 @@ clocks = <&xtal_32k>, <&xtal>; clock-names = "xtal_32k", "xtal"; + + assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>; + assigned-clock-rates = <208000000>; }; }; - /* - * MIC Interrupt controller includes: - * MIC @40008000 - * SIC1 @4000C000 - * SIC2 @40010000 - */ mic: interrupt-controller@40008000 { compatible = "nxp,lpc3220-mic"; + reg = <0x40008000 0x4000>; interrupt-controller; - reg = <0x40008000 0xC000>; #interrupt-cells = <2>; }; + sic1: interrupt-controller@4000c000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x4000c000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>; + }; + + sic2: interrupt-controller@40010000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x40010000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + }; + uart1: serial@40014000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; @@ -334,7 +372,8 @@ rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; - interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&sic1>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_RTC>; }; @@ -387,7 +426,8 @@ adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; @@ -395,7 +435,8 @@ tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 022d495432c1..6c9048d4d03c 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -45,50 +45,50 @@ poll-interval = <100>; autorepeat; - button@0 { + button0 { label = "joy:right"; linux,code = <KEY_RIGHT>; gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; }; - button@1 { + button1 { label = "joy:up"; linux,code = <KEY_UP>; gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; }; - button@2 { + button2 { label = "joy:enter"; linux,code = <KEY_ENTER>; gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; }; - button@3 { + button3 { label = "joy:left"; linux,code = <KEY_LEFT>; gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; }; - button@4 { + button4 { label = "joy:down"; linux,code = <KEY_DOWN>; gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; }; - button@5 { + button5 { label = "user:sw3"; linux,code = <KEY_F1>; gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; }; - button@6 { + button6 { label = "user:sw4"; linux,code = <KEY_F2>; gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; }; - button@7 { + button7 { label = "user:sw5"; linux,code = <KEY_F3>; gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; @@ -119,9 +119,25 @@ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>; }; }; + + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "3v3io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &pinctrl { + adc1_pins: adc1-pins { + adc1_pins_cfg { + pins = "pf_9"; + function = "adc"; + input-disable; + bias-disable; + }; + }; + emc_pins: emc-pins { emc_addr0_23_cfg { pins = "p2_9", "p2_10", "p2_11", "p2_12", @@ -325,6 +341,13 @@ }; }; +&adc1 { + status = "okay"; + vref-supply = <&vcc>; + pinctrl-names = "default"; + pinctrl-0 = <&adc1_pins>; +}; + &emc { status = "okay"; pinctrl-names = "default"; @@ -430,7 +453,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash@0 { + flash { compatible = "jedec,spi-nor"; spi-rx-bus-width = <4>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 079d3cf8c00b..1919be4dab2b 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -38,6 +38,13 @@ reg = <0x28000000 0x2000000>; /* 32 MB */ }; + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "3v3-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + /* vmmc is controlled by sdmmc host internally */ vmmc: vmmc_fixed { compatible = "regulator-fixed"; @@ -55,31 +62,31 @@ poll-interval = <100>; autorepeat; - button@0 { + button0 { label = "joy_enter"; linux,code = <KEY_ENTER>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; - button@1 { + button1 { label = "joy_left"; linux,code = <KEY_LEFT>; gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>; }; - button@2 { + button2 { label = "joy_up"; linux,code = <KEY_UP>; gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>; }; - button@3 { + button3 { label = "joy_right"; linux,code = <KEY_RIGHT>; gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>; }; - button@4 { + button4 { label = "joy_down"; linux,code = <KEY_DOWN>; gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>; @@ -461,6 +468,11 @@ }; }; +&adc0 { + status = "okay"; + vref-supply = <&vcc>; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; @@ -483,6 +495,11 @@ }; }; +&dac { + status = "okay"; + vref-supply = <&vcc>; +}; + &emc { status = "okay"; pinctrl-names = "default"; @@ -567,7 +584,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash@0 { + flash { compatible = "jedec,spi-nor"; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 726372d3adc0..5ae8e9297e9a 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -119,6 +119,20 @@ }; + msi1: msi-controller@1570e00 { + compatible = "fsl,1s1021a-msi"; + reg = <0x0 0x1570e00 0x0 0x8>; + msi-controller; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + }; + + msi2: msi-controller@1570e08 { + compatible = "fsl,1s1021a-msi"; + reg = <0x0 0x1570e08 0x0 0x8>; + msi-controller; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + }; + ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; @@ -245,7 +259,7 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&platform_clk 1>; - spi-num-chipselects = <5>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -258,7 +272,7 @@ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&platform_clk 1>; - spi-num-chipselects = <5>; + spi-num-chipselects = <6>; big-endian; status = "disabled"; }; @@ -332,6 +346,46 @@ status = "disabled"; }; + gpio0: gpio@2300000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + lpuart0: serial@2950000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; @@ -443,8 +497,9 @@ compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 0>; - clock-names = "dcu"; + clocks = <&platform_clk 0>, + <&platform_clk 0>; + clock-names = "dcu", "pix"; big-endian; status = "disabled"; }; @@ -587,6 +642,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, @@ -609,6 +665,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/mps2-an385.dts index 651b962e3d53..31c374d72a6f 100644 --- a/arch/arm/boot/dts/rk3288-thermal.dtsi +++ b/arch/arm/boot/dts/mps2-an385.dts @@ -1,7 +1,7 @@ /* - * Device Tree Source for RK3288 SoC thermal + * Copyright (C) 2015 ARM Limited * - * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * Author: Vladimir Murzin <vladimir.murzin@arm.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,77 +42,51 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/thermal/thermal.h> +/dts-v1/; -reserve_thermal: reserve_thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ +#include "mps2.dtsi" - thermal-sensors = <&tsadc 0>; -}; +/ { + model = "ARM MPS2 Application Note 385/386"; + compatible = "arm,mps2"; -cpu_thermal: cpu_thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ + aliases { + serial0 = &uart0; + }; - thermal-sensors = <&tsadc 1>; + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:9600n8"; + }; - trips { - cpu_alert0: cpu_alert0 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <75000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; + memory { + device_type = "memory"; + reg = <0x21000000 0x1000000>; }; - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + smb { + ethernet@0,0 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0 0x0 0x10000>; + interrupts = <13>; + interrupt-parent = <&nvic>; + smsc,irq-active-high; }; }; }; -gpu_thermal: gpu_thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ +&uart0 { + status = "okay"; +}; - thermal-sensors = <&tsadc 2>; +&timer0 { + status = "okay"; +}; - trips { - gpu_alert0: gpu_alert0 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - gpu_crit: gpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; +&timer1 { + status = "okay"; +}; - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; +&wdt { + status = "okay"; }; diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts new file mode 100644 index 000000000000..5e7e5ca2edbf --- /dev/null +++ b/arch/arm/boot/dts/mps2-an399.dts @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2015 ARM Limited + * + * Author: Vladimir Murzin <vladimir.murzin@arm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "mps2.dtsi" + +/ { + model = "ARM MPS2 Application Note 399/400"; + compatible = "arm,mps2"; + + aliases { + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:9600n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x1000000>; + }; + + smb { + ethernet@1,0 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <1 0x0 0x10000>; + interrupts = <13>; + interrupt-parent = <&nvic>; + smsc,irq-active-high; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&timer0 { + status = "okay"; +}; + +&timer1 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi new file mode 100644 index 000000000000..e3fed8d34558 --- /dev/null +++ b/arch/arm/boot/dts/mps2.dtsi @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2015 ARM Limited + * + * Author: Vladimir Murzin <vladimir.murzin@arm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armv7-m.dtsi" + +/ { + oscclk0: clk-osc0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + oscclk1: clk-osc1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + oscclk2: clk-osc2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + cfgclk: clk-cfg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + + spicfgclk: clk-spicfg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + }; + + sysclk: clk-sys { + compatible = "fixed-factor-clock"; + clocks = <&oscclk0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + + audmclk: clk-audm { + compatible = "fixed-factor-clock"; + clocks = <&oscclk1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + + audsclk: clk-auds { + compatible = "fixed-factor-clock"; + clocks = <&oscclk1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + + spiclcd: clk-cpiclcd { + compatible = "fixed-factor-clock"; + clocks = <&oscclk0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + + spicon: clk-spicon { + compatible = "fixed-factor-clock"; + clocks = <&oscclk0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + + i2cclcd: clk-i2cclcd { + compatible = "fixed-factor-clock"; + clocks = <&oscclk0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + + i2caud: clk-i2caud { + compatible = "fixed-factor-clock"; + clocks = <&oscclk0>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + + soc { + compatible = "simple-bus"; + ranges; + + apb@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x10000>; + + timer0: mps2-timer0@0 { + compatible = "arm,mps2-timer"; + reg = <0x0 0x1000>; + interrupts = <8>; + clocks = <&sysclk>; + status = "disabled"; + }; + + timer1: mps2-timer1@1000 { + compatible = "arm,mps2-timer"; + reg = <0x1000 0x1000>; + interrupts = <9>; + clocks = <&sysclk>; + status = "disabled"; + }; + + timer2: dual-timer@2000 { + compatible = "arm,sp804"; + reg = <0x2000 0x1000>; + clocks = <&sysclk>; + interrupts = <10>; + status = "disabled"; + }; + + uart0: serial@4000 { + compatible = "arm,mps2-uart"; + reg = <0x4000 0x1000>; + interrupts = <0 1 12>; + clocks = <&sysclk>; + status = "disabled"; + }; + + uart1: serial@5000 { + compatible = "arm,mps2-uart"; + reg = <0x5000 0x1000>; + interrupts = <2 3 12>; + clocks = <&sysclk>; + status = "disabled"; + }; + + uart2: serial@6000 { + compatible = "arm,mps2-uart"; + reg = <0x6000 0x1000>; + interrupts = <4 5 12>; + clocks = <&sysclk>; + status = "disabled"; + }; + + wdt: watchdog@8000 { + compatible = "arm,sp805", "arm,primecell"; + arm,primecell-periphid = <0x00141805>; + reg = <0x8000 0x1000>; + interrupts = <0>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + }; + + fpga@40020000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40020000 0x10000>; + + fpgaio@8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x8000 0x10>; + + led0 { + compatible = "register-bit-led"; + offset = <0x0>; + mask = <0x01>; + label = "userled:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led1 { + compatible = "register-bit-led"; + offset = <0x0>; + mask = <0x02>; + label = "userled:1"; + linux,default-trigger = "usr"; + default-state = "off"; + }; + }; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x40200000 0x10000>, + <1 0 0xa0000000 0x10000>; + }; +}; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 83437683aa60..18596a2c58a1 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton64.dtsi" +#include "mt2701-pinfunc.h" / { compatible = "mediatek,mt2701"; @@ -85,6 +86,24 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscfg_pctl_a: syscfg@10005000 { + compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt2701-wdt", "mediatek,mt6589-wdt"; diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi index ce8c742d7e92..f8e5bd3cc628 100644 --- a/arch/arm/boot/dts/omap2420-clocks.dtsi +++ b/arch/arm/boot/dts/omap2420-clocks.dtsi @@ -9,7 +9,7 @@ */ &prcm_clocks { - sys_clkout2_src_gate: sys_clkout2_src_gate { + sys_clkout2_src_gate: sys_clkout2_src_gate@70 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&core_ck>; @@ -17,7 +17,7 @@ reg = <0x0070>; }; - sys_clkout2_src_mux: sys_clkout2_src_mux { + sys_clkout2_src_mux: sys_clkout2_src_mux@70 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; @@ -31,7 +31,7 @@ clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>; }; - sys_clkout2: sys_clkout2 { + sys_clkout2: sys_clkout2@70 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkout2_src>; @@ -41,7 +41,7 @@ ti,index-power-of-two; }; - dsp_gate_ick: dsp_gate_ick { + dsp_gate_ick: dsp_gate_ick@810 { #clock-cells = <0>; compatible = "ti,composite-interface-clock"; clocks = <&dsp_fck>; @@ -49,7 +49,7 @@ reg = <0x0810>; }; - dsp_div_ick: dsp_div_ick { + dsp_div_ick: dsp_div_ick@840 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&dsp_fck>; @@ -65,7 +65,7 @@ clocks = <&dsp_gate_ick>, <&dsp_div_ick>; }; - iva1_gate_ifck: iva1_gate_ifck { + iva1_gate_ifck: iva1_gate_ifck@800 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_ck>; @@ -73,7 +73,7 @@ reg = <0x0800>; }; - iva1_div_ifck: iva1_div_ifck { + iva1_div_ifck: iva1_div_ifck@840 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_ck>; @@ -96,7 +96,7 @@ clock-div = <2>; }; - iva1_mpu_int_ifck: iva1_mpu_int_ifck { + iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&iva1_ifck_div>; @@ -104,7 +104,7 @@ reg = <0x0800>; }; - wdt3_ick: wdt3_ick { + wdt3_ick: wdt3_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -112,7 +112,7 @@ reg = <0x0210>; }; - wdt3_fck: wdt3_fck { + wdt3_fck: wdt3_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; @@ -120,7 +120,7 @@ reg = <0x0200>; }; - mmc_ick: mmc_ick { + mmc_ick: mmc_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -128,7 +128,7 @@ reg = <0x0210>; }; - mmc_fck: mmc_fck { + mmc_fck: mmc_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_96m_ck>; @@ -136,7 +136,7 @@ reg = <0x0200>; }; - eac_ick: eac_ick { + eac_ick: eac_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -144,7 +144,7 @@ reg = <0x0210>; }; - eac_fck: eac_fck { + eac_fck: eac_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_96m_ck>; @@ -152,7 +152,7 @@ reg = <0x0200>; }; - i2c1_fck: i2c1_fck { + i2c1_fck: i2c1_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_12m_ck>; @@ -160,7 +160,7 @@ reg = <0x0200>; }; - i2c2_fck: i2c2_fck { + i2c2_fck: i2c2_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_12m_ck>; @@ -168,7 +168,7 @@ reg = <0x0200>; }; - vlynq_ick: vlynq_ick { + vlynq_ick: vlynq_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l3_ck>; @@ -176,7 +176,7 @@ reg = <0x0210>; }; - vlynq_gate_fck: vlynq_gate_fck { + vlynq_gate_fck: vlynq_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_ck>; @@ -192,7 +192,7 @@ clock-div = <18>; }; - vlynq_mux_fck: vlynq_mux_fck { + vlynq_mux_fck: vlynq_mux_fck@240 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 8491f46c61b7..db95aadcca70 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -7,7 +7,7 @@ }; ocp { - i2c@0 { + i2c0 { compatible = "i2c-cbus-gpio"; gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */ &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */ diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 5b9a376cc31e..fb712b9aa874 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -130,6 +130,10 @@ gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; mcbsp1: mcbsp@48074000 { diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi index 93fed68839b9..a5aa7d619849 100644 --- a/arch/arm/boot/dts/omap2430-clocks.dtsi +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -9,7 +9,7 @@ */ &scm_clocks { - mcbsp3_mux_fck: mcbsp3_mux_fck { + mcbsp3_mux_fck: mcbsp3_mux_fck@78 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; @@ -22,7 +22,7 @@ clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; }; - mcbsp4_mux_fck: mcbsp4_mux_fck { + mcbsp4_mux_fck: mcbsp4_mux_fck@78 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; @@ -36,7 +36,7 @@ clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>; }; - mcbsp5_mux_fck: mcbsp5_mux_fck { + mcbsp5_mux_fck: mcbsp5_mux_fck@78 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; @@ -52,7 +52,7 @@ }; &prcm_clocks { - iva2_1_gate_ick: iva2_1_gate_ick { + iva2_1_gate_ick: iva2_1_gate_ick@800 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&dsp_fck>; @@ -60,7 +60,7 @@ reg = <0x0800>; }; - iva2_1_div_ick: iva2_1_div_ick { + iva2_1_div_ick: iva2_1_div_ick@840 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&dsp_fck>; @@ -76,7 +76,7 @@ clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>; }; - mdm_gate_ick: mdm_gate_ick { + mdm_gate_ick: mdm_gate_ick@c10 { #clock-cells = <0>; compatible = "ti,composite-interface-clock"; clocks = <&core_ck>; @@ -84,7 +84,7 @@ reg = <0x0c10>; }; - mdm_div_ick: mdm_div_ick { + mdm_div_ick: mdm_div_ick@c40 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_ck>; @@ -98,7 +98,7 @@ clocks = <&mdm_gate_ick>, <&mdm_div_ick>; }; - mdm_osc_ck: mdm_osc_ck { + mdm_osc_ck: mdm_osc_ck@c00 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&osc_ck>; @@ -106,7 +106,7 @@ reg = <0x0c00>; }; - mcbsp3_ick: mcbsp3_ick { + mcbsp3_ick: mcbsp3_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -114,7 +114,7 @@ reg = <0x0214>; }; - mcbsp3_gate_fck: mcbsp3_gate_fck { + mcbsp3_gate_fck: mcbsp3_gate_fck@204 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -122,7 +122,7 @@ reg = <0x0204>; }; - mcbsp4_ick: mcbsp4_ick { + mcbsp4_ick: mcbsp4_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -130,7 +130,7 @@ reg = <0x0214>; }; - mcbsp4_gate_fck: mcbsp4_gate_fck { + mcbsp4_gate_fck: mcbsp4_gate_fck@204 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -138,7 +138,7 @@ reg = <0x0204>; }; - mcbsp5_ick: mcbsp5_ick { + mcbsp5_ick: mcbsp5_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -146,7 +146,7 @@ reg = <0x0214>; }; - mcbsp5_gate_fck: mcbsp5_gate_fck { + mcbsp5_gate_fck: mcbsp5_gate_fck@204 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -154,7 +154,7 @@ reg = <0x0204>; }; - mcspi3_ick: mcspi3_ick { + mcspi3_ick: mcspi3_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -162,7 +162,7 @@ reg = <0x0214>; }; - mcspi3_fck: mcspi3_fck { + mcspi3_fck: mcspi3_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; @@ -170,7 +170,7 @@ reg = <0x0204>; }; - icr_ick: icr_ick { + icr_ick: icr_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -178,7 +178,7 @@ reg = <0x0410>; }; - i2chs1_fck: i2chs1_fck { + i2chs1_fck: i2chs1_fck@204 { #clock-cells = <0>; compatible = "ti,omap2430-interface-clock"; clocks = <&func_96m_ck>; @@ -186,7 +186,7 @@ reg = <0x0204>; }; - i2chs2_fck: i2chs2_fck { + i2chs2_fck: i2chs2_fck@204 { #clock-cells = <0>; compatible = "ti,omap2430-interface-clock"; clocks = <&func_96m_ck>; @@ -194,7 +194,7 @@ reg = <0x0204>; }; - usbhs_ick: usbhs_ick { + usbhs_ick: usbhs_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l3_ck>; @@ -202,7 +202,7 @@ reg = <0x0214>; }; - mmchs1_ick: mmchs1_ick { + mmchs1_ick: mmchs1_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -210,7 +210,7 @@ reg = <0x0214>; }; - mmchs1_fck: mmchs1_fck { + mmchs1_fck: mmchs1_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_96m_ck>; @@ -218,7 +218,7 @@ reg = <0x0204>; }; - mmchs2_ick: mmchs2_ick { + mmchs2_ick: mmchs2_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -226,7 +226,7 @@ reg = <0x0214>; }; - mmchs2_fck: mmchs2_fck { + mmchs2_fck: mmchs2_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_96m_ck>; @@ -234,7 +234,7 @@ reg = <0x0204>; }; - gpio5_ick: gpio5_ick { + gpio5_ick: gpio5_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -242,7 +242,7 @@ reg = <0x0214>; }; - gpio5_fck: gpio5_fck { + gpio5_fck: gpio5_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; @@ -250,7 +250,7 @@ reg = <0x0204>; }; - mdm_intc_ick: mdm_intc_ick { + mdm_intc_ick: mdm_intc_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -258,7 +258,7 @@ reg = <0x0214>; }; - mmchsdb1_fck: mmchsdb1_fck { + mmchsdb1_fck: mmchsdb1_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; @@ -266,7 +266,7 @@ reg = <0x0204>; }; - mmchsdb2_fck: mmchsdb2_fck { + mmchsdb2_fck: mmchsdb2_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 798dda072b2a..455aaea407dd 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -63,7 +63,7 @@ #size-cells = <0>; }; - pbias_regulator: pbias_regulator { + pbias_regulator: pbias_regulator@230 { compatible = "ti,pbias-omap2", "ti,pbias-omap"; reg = <0x230 0x4>; syscon = <&scm_conf>; @@ -154,6 +154,10 @@ gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; mcbsp1: mcbsp@48074000 { diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index 63965b876973..ca73722b5ea4 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &scm_clocks { - mcbsp1_mux_fck: mcbsp1_mux_fck { + mcbsp1_mux_fck: mcbsp1_mux_fck@4 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; @@ -22,7 +22,7 @@ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; }; - mcbsp2_mux_fck: mcbsp2_mux_fck { + mcbsp2_mux_fck: mcbsp2_mux_fck@4 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_96m_ck>, <&mcbsp_clks>; @@ -74,7 +74,7 @@ clock-frequency = <26000000>; }; - aplls_clkin_ck: aplls_clkin_ck { + aplls_clkin_ck: aplls_clkin_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>; @@ -90,7 +90,7 @@ clock-div = <1>; }; - osc_ck: osc_ck { + osc_ck: osc_ck@60 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>; @@ -99,7 +99,7 @@ ti,index-starts-at-one; }; - sys_ck: sys_ck { + sys_ck: sys_ck@60 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&osc_ck>; @@ -121,14 +121,14 @@ clock-frequency = <0x0>; }; - dpll_ck: dpll_ck { + dpll_ck: dpll_ck@500 { #clock-cells = <0>; compatible = "ti,omap2-dpll-core-clock"; clocks = <&sys_ck>, <&sys_ck>; reg = <0x0500>, <0x0540>; }; - apll96_ck: apll96_ck { + apll96_ck: apll96_ck@500 { #clock-cells = <0>; compatible = "ti,omap2-apll-clock"; clocks = <&sys_ck>; @@ -138,7 +138,7 @@ reg = <0x0500>, <0x0530>, <0x0520>; }; - apll54_ck: apll54_ck { + apll54_ck: apll54_ck@500 { #clock-cells = <0>; compatible = "ti,omap2-apll-clock"; clocks = <&sys_ck>; @@ -148,7 +148,7 @@ reg = <0x0500>, <0x0530>, <0x0520>; }; - func_54m_ck: func_54m_ck { + func_54m_ck: func_54m_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&apll54_ck>, <&alt_ck>; @@ -176,7 +176,7 @@ clock-div = <2>; }; - func_48m_ck: func_48m_ck { + func_48m_ck: func_48m_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&apll96_d2_ck>, <&alt_ck>; @@ -192,7 +192,7 @@ clock-div = <4>; }; - sys_clkout_src_gate: sys_clkout_src_gate { + sys_clkout_src_gate: sys_clkout_src_gate@70 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&core_ck>; @@ -200,7 +200,7 @@ reg = <0x0070>; }; - sys_clkout_src_mux: sys_clkout_src_mux { + sys_clkout_src_mux: sys_clkout_src_mux@70 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; @@ -213,7 +213,7 @@ clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>; }; - sys_clkout: sys_clkout { + sys_clkout: sys_clkout@70 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkout_src>; @@ -223,7 +223,7 @@ ti,index-power-of-two; }; - emul_ck: emul_ck { + emul_ck: emul_ck@78 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_54m_ck>; @@ -231,7 +231,7 @@ reg = <0x0078>; }; - mpu_ck: mpu_ck { + mpu_ck: mpu_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&core_ck>; @@ -240,7 +240,7 @@ ti,index-starts-at-one; }; - dsp_gate_fck: dsp_gate_fck { + dsp_gate_fck: dsp_gate_fck@800 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_ck>; @@ -248,7 +248,7 @@ reg = <0x0800>; }; - dsp_div_fck: dsp_div_fck { + dsp_div_fck: dsp_div_fck@840 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_ck>; @@ -261,7 +261,7 @@ clocks = <&dsp_gate_fck>, <&dsp_div_fck>; }; - core_l3_ck: core_l3_ck { + core_l3_ck: core_l3_ck@240 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&core_ck>; @@ -270,7 +270,7 @@ ti,index-starts-at-one; }; - gfx_3d_gate_fck: gfx_3d_gate_fck { + gfx_3d_gate_fck: gfx_3d_gate_fck@300 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_l3_ck>; @@ -278,7 +278,7 @@ reg = <0x0300>; }; - gfx_3d_div_fck: gfx_3d_div_fck { + gfx_3d_div_fck: gfx_3d_div_fck@340 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_l3_ck>; @@ -293,7 +293,7 @@ clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>; }; - gfx_2d_gate_fck: gfx_2d_gate_fck { + gfx_2d_gate_fck: gfx_2d_gate_fck@300 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_l3_ck>; @@ -301,7 +301,7 @@ reg = <0x0300>; }; - gfx_2d_div_fck: gfx_2d_div_fck { + gfx_2d_div_fck: gfx_2d_div_fck@340 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_l3_ck>; @@ -316,7 +316,7 @@ clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>; }; - gfx_ick: gfx_ick { + gfx_ick: gfx_ick@310 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_l3_ck>; @@ -324,7 +324,7 @@ reg = <0x0310>; }; - l4_ck: l4_ck { + l4_ck: l4_ck@240 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&core_l3_ck>; @@ -334,7 +334,7 @@ ti,index-starts-at-one; }; - dss_ick: dss_ick { + dss_ick: dss_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-no-wait-interface-clock"; clocks = <&l4_ck>; @@ -342,7 +342,7 @@ reg = <0x0210>; }; - dss1_gate_fck: dss1_gate_fck { + dss1_gate_fck: dss1_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&core_ck>; @@ -428,7 +428,7 @@ clock-div = <16>; }; - dss1_mux_fck: dss1_mux_fck { + dss1_mux_fck: dss1_mux_fck@240 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>; @@ -442,7 +442,7 @@ clocks = <&dss1_gate_fck>, <&dss1_mux_fck>; }; - dss2_gate_fck: dss2_gate_fck { + dss2_gate_fck: dss2_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&func_48m_ck>; @@ -450,7 +450,7 @@ reg = <0x0200>; }; - dss2_mux_fck: dss2_mux_fck { + dss2_mux_fck: dss2_mux_fck@240 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_ck>, <&func_48m_ck>; @@ -464,7 +464,7 @@ clocks = <&dss2_gate_fck>, <&dss2_mux_fck>; }; - dss_54m_fck: dss_54m_fck { + dss_54m_fck: dss_54m_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_54m_ck>; @@ -472,7 +472,7 @@ reg = <0x0200>; }; - ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck { + ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_ck>; @@ -480,7 +480,7 @@ reg = <0x0204>; }; - ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck { + ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_ck>; @@ -494,7 +494,7 @@ clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>; }; - usb_l4_gate_ick: usb_l4_gate_ick { + usb_l4_gate_ick: usb_l4_gate_ick@214 { #clock-cells = <0>; compatible = "ti,composite-interface-clock"; clocks = <&core_l3_ck>; @@ -502,7 +502,7 @@ reg = <0x0214>; }; - usb_l4_div_ick: usb_l4_div_ick { + usb_l4_div_ick: usb_l4_div_ick@240 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&core_l3_ck>; @@ -517,7 +517,7 @@ clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; }; - ssi_l4_ick: ssi_l4_ick { + ssi_l4_ick: ssi_l4_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -525,7 +525,7 @@ reg = <0x0214>; }; - gpt1_ick: gpt1_ick { + gpt1_ick: gpt1_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -533,7 +533,7 @@ reg = <0x0410>; }; - gpt1_gate_fck: gpt1_gate_fck { + gpt1_gate_fck: gpt1_gate_fck@400 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -541,7 +541,7 @@ reg = <0x0400>; }; - gpt1_mux_fck: gpt1_mux_fck { + gpt1_mux_fck: gpt1_mux_fck@440 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -554,7 +554,7 @@ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; }; - gpt2_ick: gpt2_ick { + gpt2_ick: gpt2_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -562,7 +562,7 @@ reg = <0x0210>; }; - gpt2_gate_fck: gpt2_gate_fck { + gpt2_gate_fck: gpt2_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -570,7 +570,7 @@ reg = <0x0200>; }; - gpt2_mux_fck: gpt2_mux_fck { + gpt2_mux_fck: gpt2_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -584,7 +584,7 @@ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; }; - gpt3_ick: gpt3_ick { + gpt3_ick: gpt3_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -592,7 +592,7 @@ reg = <0x0210>; }; - gpt3_gate_fck: gpt3_gate_fck { + gpt3_gate_fck: gpt3_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -600,7 +600,7 @@ reg = <0x0200>; }; - gpt3_mux_fck: gpt3_mux_fck { + gpt3_mux_fck: gpt3_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -614,7 +614,7 @@ clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; }; - gpt4_ick: gpt4_ick { + gpt4_ick: gpt4_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -622,7 +622,7 @@ reg = <0x0210>; }; - gpt4_gate_fck: gpt4_gate_fck { + gpt4_gate_fck: gpt4_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -630,7 +630,7 @@ reg = <0x0200>; }; - gpt4_mux_fck: gpt4_mux_fck { + gpt4_mux_fck: gpt4_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -644,7 +644,7 @@ clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; }; - gpt5_ick: gpt5_ick { + gpt5_ick: gpt5_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -652,7 +652,7 @@ reg = <0x0210>; }; - gpt5_gate_fck: gpt5_gate_fck { + gpt5_gate_fck: gpt5_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -660,7 +660,7 @@ reg = <0x0200>; }; - gpt5_mux_fck: gpt5_mux_fck { + gpt5_mux_fck: gpt5_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -674,7 +674,7 @@ clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; }; - gpt6_ick: gpt6_ick { + gpt6_ick: gpt6_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -682,7 +682,7 @@ reg = <0x0210>; }; - gpt6_gate_fck: gpt6_gate_fck { + gpt6_gate_fck: gpt6_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -690,7 +690,7 @@ reg = <0x0200>; }; - gpt6_mux_fck: gpt6_mux_fck { + gpt6_mux_fck: gpt6_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -704,7 +704,7 @@ clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; }; - gpt7_ick: gpt7_ick { + gpt7_ick: gpt7_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -712,7 +712,7 @@ reg = <0x0210>; }; - gpt7_gate_fck: gpt7_gate_fck { + gpt7_gate_fck: gpt7_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -720,7 +720,7 @@ reg = <0x0200>; }; - gpt7_mux_fck: gpt7_mux_fck { + gpt7_mux_fck: gpt7_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -734,7 +734,7 @@ clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; }; - gpt8_ick: gpt8_ick { + gpt8_ick: gpt8_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -742,7 +742,7 @@ reg = <0x0210>; }; - gpt8_gate_fck: gpt8_gate_fck { + gpt8_gate_fck: gpt8_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -750,7 +750,7 @@ reg = <0x0200>; }; - gpt8_mux_fck: gpt8_mux_fck { + gpt8_mux_fck: gpt8_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -764,7 +764,7 @@ clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; }; - gpt9_ick: gpt9_ick { + gpt9_ick: gpt9_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -772,7 +772,7 @@ reg = <0x0210>; }; - gpt9_gate_fck: gpt9_gate_fck { + gpt9_gate_fck: gpt9_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -780,7 +780,7 @@ reg = <0x0200>; }; - gpt9_mux_fck: gpt9_mux_fck { + gpt9_mux_fck: gpt9_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -794,7 +794,7 @@ clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>; }; - gpt10_ick: gpt10_ick { + gpt10_ick: gpt10_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -802,7 +802,7 @@ reg = <0x0210>; }; - gpt10_gate_fck: gpt10_gate_fck { + gpt10_gate_fck: gpt10_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -810,7 +810,7 @@ reg = <0x0200>; }; - gpt10_mux_fck: gpt10_mux_fck { + gpt10_mux_fck: gpt10_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -824,7 +824,7 @@ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; }; - gpt11_ick: gpt11_ick { + gpt11_ick: gpt11_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -832,7 +832,7 @@ reg = <0x0210>; }; - gpt11_gate_fck: gpt11_gate_fck { + gpt11_gate_fck: gpt11_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -840,7 +840,7 @@ reg = <0x0200>; }; - gpt11_mux_fck: gpt11_mux_fck { + gpt11_mux_fck: gpt11_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -854,7 +854,7 @@ clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>; }; - gpt12_ick: gpt12_ick { + gpt12_ick: gpt12_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -862,7 +862,7 @@ reg = <0x0210>; }; - gpt12_gate_fck: gpt12_gate_fck { + gpt12_gate_fck: gpt12_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&func_32k_ck>; @@ -870,7 +870,7 @@ reg = <0x0200>; }; - gpt12_mux_fck: gpt12_mux_fck { + gpt12_mux_fck: gpt12_mux_fck@244 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; @@ -884,7 +884,7 @@ clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>; }; - mcbsp1_ick: mcbsp1_ick { + mcbsp1_ick: mcbsp1_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -892,7 +892,7 @@ reg = <0x0210>; }; - mcbsp1_gate_fck: mcbsp1_gate_fck { + mcbsp1_gate_fck: mcbsp1_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -900,7 +900,7 @@ reg = <0x0200>; }; - mcbsp2_ick: mcbsp2_ick { + mcbsp2_ick: mcbsp2_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -908,7 +908,7 @@ reg = <0x0210>; }; - mcbsp2_gate_fck: mcbsp2_gate_fck { + mcbsp2_gate_fck: mcbsp2_gate_fck@200 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -916,7 +916,7 @@ reg = <0x0200>; }; - mcspi1_ick: mcspi1_ick { + mcspi1_ick: mcspi1_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -924,7 +924,7 @@ reg = <0x0210>; }; - mcspi1_fck: mcspi1_fck { + mcspi1_fck: mcspi1_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; @@ -932,7 +932,7 @@ reg = <0x0200>; }; - mcspi2_ick: mcspi2_ick { + mcspi2_ick: mcspi2_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -940,7 +940,7 @@ reg = <0x0210>; }; - mcspi2_fck: mcspi2_fck { + mcspi2_fck: mcspi2_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; @@ -948,7 +948,7 @@ reg = <0x0200>; }; - uart1_ick: uart1_ick { + uart1_ick: uart1_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -956,7 +956,7 @@ reg = <0x0210>; }; - uart1_fck: uart1_fck { + uart1_fck: uart1_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; @@ -964,7 +964,7 @@ reg = <0x0200>; }; - uart2_ick: uart2_ick { + uart2_ick: uart2_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -972,7 +972,7 @@ reg = <0x0210>; }; - uart2_fck: uart2_fck { + uart2_fck: uart2_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; @@ -980,7 +980,7 @@ reg = <0x0200>; }; - uart3_ick: uart3_ick { + uart3_ick: uart3_ick@214 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -988,7 +988,7 @@ reg = <0x0214>; }; - uart3_fck: uart3_fck { + uart3_fck: uart3_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; @@ -996,7 +996,7 @@ reg = <0x0204>; }; - gpios_ick: gpios_ick { + gpios_ick: gpios_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -1004,7 +1004,7 @@ reg = <0x0410>; }; - gpios_fck: gpios_fck { + gpios_fck: gpios_fck@400 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; @@ -1012,7 +1012,7 @@ reg = <0x0400>; }; - mpu_wdt_ick: mpu_wdt_ick { + mpu_wdt_ick: mpu_wdt_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -1020,7 +1020,7 @@ reg = <0x0410>; }; - mpu_wdt_fck: mpu_wdt_fck { + mpu_wdt_fck: mpu_wdt_fck@400 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; @@ -1028,7 +1028,7 @@ reg = <0x0400>; }; - sync_32k_ick: sync_32k_ick { + sync_32k_ick: sync_32k_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -1036,7 +1036,7 @@ reg = <0x0410>; }; - wdt1_ick: wdt1_ick { + wdt1_ick: wdt1_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -1044,7 +1044,7 @@ reg = <0x0410>; }; - omapctrl_ick: omapctrl_ick { + omapctrl_ick: omapctrl_ick@410 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -1052,7 +1052,7 @@ reg = <0x0410>; }; - cam_fck: cam_fck { + cam_fck: cam_fck@200 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_96m_ck>; @@ -1060,7 +1060,7 @@ reg = <0x0200>; }; - cam_ick: cam_ick { + cam_ick: cam_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-no-wait-interface-clock"; clocks = <&l4_ck>; @@ -1068,7 +1068,7 @@ reg = <0x0210>; }; - mailboxes_ick: mailboxes_ick { + mailboxes_ick: mailboxes_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1076,7 +1076,7 @@ reg = <0x0210>; }; - wdt4_ick: wdt4_ick { + wdt4_ick: wdt4_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1084,7 +1084,7 @@ reg = <0x0210>; }; - wdt4_fck: wdt4_fck { + wdt4_fck: wdt4_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_32k_ck>; @@ -1092,7 +1092,7 @@ reg = <0x0200>; }; - mspro_ick: mspro_ick { + mspro_ick: mspro_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1100,7 +1100,7 @@ reg = <0x0210>; }; - mspro_fck: mspro_fck { + mspro_fck: mspro_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_96m_ck>; @@ -1108,7 +1108,7 @@ reg = <0x0200>; }; - fac_ick: fac_ick { + fac_ick: fac_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1116,7 +1116,7 @@ reg = <0x0210>; }; - fac_fck: fac_fck { + fac_fck: fac_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_12m_ck>; @@ -1124,7 +1124,7 @@ reg = <0x0200>; }; - hdq_ick: hdq_ick { + hdq_ick: hdq_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1132,7 +1132,7 @@ reg = <0x0210>; }; - hdq_fck: hdq_fck { + hdq_fck: hdq_fck@200 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_12m_ck>; @@ -1140,7 +1140,7 @@ reg = <0x0200>; }; - i2c1_ick: i2c1_ick { + i2c1_ick: i2c1_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1148,7 +1148,7 @@ reg = <0x0210>; }; - i2c2_ick: i2c2_ick { + i2c2_ick: i2c2_ick@210 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1156,7 +1156,7 @@ reg = <0x0210>; }; - gpmc_fck: gpmc_fck { + gpmc_fck: gpmc_fck@238 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; clocks = <&core_l3_ck>; @@ -1174,7 +1174,7 @@ clock-div = <1>; }; - sdma_ick: sdma_ick { + sdma_ick: sdma_ick@238 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; clocks = <&core_l3_ck>; @@ -1184,7 +1184,7 @@ ti,clock-mult = <1>; }; - sdrc_ick: sdrc_ick { + sdrc_ick: sdrc_ick@238 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; clocks = <&core_l3_ck>; @@ -1194,7 +1194,7 @@ ti,clock-mult = <1>; }; - des_ick: des_ick { + des_ick: des_ick@21c { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1202,7 +1202,7 @@ reg = <0x021c>; }; - sha_ick: sha_ick { + sha_ick: sha_ick@21c { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1210,7 +1210,7 @@ reg = <0x021c>; }; - rng_ick: rng_ick { + rng_ick: rng_ick@21c { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1218,7 +1218,7 @@ reg = <0x021c>; }; - aes_ick: aes_ick { + aes_ick: aes_ick@21c { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1226,7 +1226,7 @@ reg = <0x021c>; }; - pka_ick: pka_ick { + pka_ick: pka_ick@21c { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l4_ck>; @@ -1234,7 +1234,7 @@ reg = <0x021c>; }; - usb_fck: usb_fck { + usb_fck: usb_fck@204 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&func_48m_ck>; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4602866792be..a4deff0e2d52 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -390,6 +390,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "ham1"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <16>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 5c67429a4da7..b9e58c536afd 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -57,3 +57,17 @@ &modem { compatible = "nokia,n9-modem"; }; + +&lis302 { + st,axis-x = <1>; /* LIS3_DEV_X */ + st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ + st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ + + st,min-limit-x = <(-46)>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + + st,max-limit-x = <(-3)>; + st,max-limit-y = <46>; + st,max-limit-z = <46>; +}; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 858a25048102..a00ca761675d 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -14,6 +14,13 @@ cpus { cpu@0 { cpu0-supply = <&vcc>; + operating-points = < + /* kHz uV */ + 300000 1012500 + 600000 1200000 + 800000 1325000 + 1000000 1375000 + >; }; }; @@ -39,9 +46,34 @@ enable-active-high; regulator-boot-off; }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "debug::sleep"; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */ + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&debug_leds>; + }; + }; }; &omap3_pmx_core { + accelerator_pins: pinmux_accelerator_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */ + >; + }; + + debug_leds: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */ + >; + }; + mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ @@ -129,6 +161,30 @@ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; +&vdac { + regulator-name = "vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&vpll1 { + regulator-name = "vpll1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&vpll2 { + regulator-name = "vpll2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&vaux1 { + regulator-name = "vaux1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + /* CSI-2 receiver */ &vaux2 { regulator-name = "vaux2"; @@ -143,12 +199,107 @@ regulator-max-microvolt = <2800000>; }; +&vaux4 { + regulator-name = "vaux4"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&vmmc1 { + regulator-name = "vmmc1"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; +}; + +&vmmc2 { + regulator-name = "vmmc2"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vintana1 { + regulator-name = "vintana1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; +}; + +&vintana2 { + regulator-name = "vintana2"; + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; +}; + +&vintdig { + regulator-name = "vintdig"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; +}; + +&vsim { + regulator-name = "vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&vio { + regulator-name = "vio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &i2c2 { clock-frequency = <400000>; }; &i2c3 { clock-frequency = <400000>; + + lis302: lis302@1d { + compatible = "st,lis3lv02d"; + reg = <0x1d>; + + Vdd-supply = <&vaux1>; + Vdd_IO-supply = <&vio>; + + pinctrl-names = "default"; + pinctrl-0 = <&accelerator_pins>; + + interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */ + + /* click flags */ + st,click-single-x; + st,click-single-y; + st,click-single-z; + + /* Limits are 0.5g * value */ + st,click-threshold-x = <8>; + st,click-threshold-y = <8>; + st,click-threshold-z = <10>; + + /* Click must be longer than time limit */ + st,click-time-limit = <9>; + + /* Kind of debounce filter */ + st,click-latency = <50>; + + st,wakeup-x-hi; + st,wakeup-y-hi; + st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ + + st,wakeup2-z-hi; + st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */ + + st,highpass-cutoff-hz = <2>; + + /* Interrupt line 1 for thresholds */ + st,irq1-ff-wu-1; + st,irq1-ff-wu-2; + /* Interrupt line 2 for click detection */ + st,irq2-click; + + st,wu-duration-1 = <8>; + st,wu-duration-2 = <8>; + }; }; &mmc1 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 7f219a9dc5be..646601a3ebd8 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -11,10 +11,33 @@ /dts-v1/; #include "omap3-n950-n9.dtsi" +#include <dt-bindings/input/input.h> / { model = "Nokia N950"; compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; + + keys { + compatible = "gpio-keys"; + + keypad_slide { + label = "Keypad Slide"; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* 109 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_slide_pins>; + }; + }; +}; + +&omap3_pmx_core { + keypad_slide_pins: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ + >; + }; }; &omap3_pmx_core { @@ -86,3 +109,79 @@ &modem { compatible = "nokia,n950-modem"; }; + +&twl { + twl_audio: audio { + compatible = "ti,twl4030-audio"; + ti,enable-vibra = <1>; + }; +}; + +&twl_keypad { + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_BACKSLASH) + MATRIX_KEY(0x01, 0x00, KEY_LEFTSHIFT) + MATRIX_KEY(0x02, 0x00, KEY_COMPOSE) + MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA) + MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) + MATRIX_KEY(0x05, 0x00, KEY_BACKSPACE) + MATRIX_KEY(0x06, 0x00, KEY_VOLUMEDOWN) + MATRIX_KEY(0x07, 0x00, KEY_VOLUMEUP) + + MATRIX_KEY(0x03, 0x01, KEY_Z) + MATRIX_KEY(0x04, 0x01, KEY_A) + MATRIX_KEY(0x05, 0x01, KEY_Q) + MATRIX_KEY(0x06, 0x01, KEY_W) + MATRIX_KEY(0x07, 0x01, KEY_E) + + MATRIX_KEY(0x03, 0x02, KEY_X) + MATRIX_KEY(0x04, 0x02, KEY_S) + MATRIX_KEY(0x05, 0x02, KEY_D) + MATRIX_KEY(0x06, 0x02, KEY_C) + MATRIX_KEY(0x07, 0x02, KEY_V) + + MATRIX_KEY(0x03, 0x03, KEY_O) + MATRIX_KEY(0x04, 0x03, KEY_I) + MATRIX_KEY(0x05, 0x03, KEY_U) + MATRIX_KEY(0x06, 0x03, KEY_L) + MATRIX_KEY(0x07, 0x03, KEY_APOSTROPHE) + + MATRIX_KEY(0x03, 0x04, KEY_Y) + MATRIX_KEY(0x04, 0x04, KEY_K) + MATRIX_KEY(0x05, 0x04, KEY_J) + MATRIX_KEY(0x06, 0x04, KEY_H) + MATRIX_KEY(0x07, 0x04, KEY_G) + + MATRIX_KEY(0x03, 0x05, KEY_B) + MATRIX_KEY(0x04, 0x05, KEY_COMMA) + MATRIX_KEY(0x05, 0x05, KEY_M) + MATRIX_KEY(0x06, 0x05, KEY_N) + MATRIX_KEY(0x07, 0x05, KEY_DOT) + + MATRIX_KEY(0x00, 0x06, KEY_SPACE) + MATRIX_KEY(0x03, 0x06, KEY_T) + MATRIX_KEY(0x04, 0x06, KEY_UP) + MATRIX_KEY(0x05, 0x06, KEY_LEFT) + MATRIX_KEY(0x06, 0x06, KEY_RIGHT) + MATRIX_KEY(0x07, 0x06, KEY_DOWN) + + MATRIX_KEY(0x03, 0x07, KEY_P) + MATRIX_KEY(0x04, 0x07, KEY_ENTER) + MATRIX_KEY(0x05, 0x07, KEY_SLASH) + MATRIX_KEY(0x06, 0x07, KEY_F) + MATRIX_KEY(0x07, 0x07, KEY_R) + >; +}; + +&lis302 { + st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */ + st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */ + st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ + + st,min-limit-x = <(-32)>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + + st,max-limit-x = <(-3)>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b41d07e8e765..9fbda38528dc 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -43,7 +43,7 @@ }; }; - pmu { + pmu@54000000 { compatible = "arm,cortex-a8-pmu"; reg = <0x54000000 0x800000>; interrupts = <3>; @@ -119,7 +119,7 @@ #size-cells = <1>; ranges = <0 0x270 0x330>; - pbias_regulator: pbias_regulator { + pbias_regulator: pbias_regulator@2b0 { compatible = "ti,pbias-omap3", "ti,pbias-omap"; reg = <0x2b0 0x4>; syscon = <&scm_conf>; @@ -725,6 +725,8 @@ #size-cells = <1>; interrupt-controller; #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; usb_otg_hs: usb_otg_hs@480ab000 { diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi index 4c22f3a7f813..86de819a0dcf 100644 --- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi +++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &cm_clocks { - gfx_l3_ck: gfx_l3_ck { + gfx_l3_ck: gfx_l3_ck@b10 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&l3_ick>; @@ -16,7 +16,7 @@ ti,bit-shift = <0>; }; - gfx_l3_fck: gfx_l3_fck { + gfx_l3_fck: gfx_l3_fck@b40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&l3_ick>; @@ -33,7 +33,7 @@ clock-div = <1>; }; - gfx_cg1_ck: gfx_cg1_ck { + gfx_cg1_ck: gfx_cg1_ck@b00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&gfx_l3_fck>; @@ -41,7 +41,7 @@ ti,bit-shift = <1>; }; - gfx_cg2_ck: gfx_cg2_ck { + gfx_cg2_ck: gfx_cg2_ck@b00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&gfx_l3_fck>; @@ -49,7 +49,7 @@ ti,bit-shift = <2>; }; - d2d_26m_fck: d2d_26m_fck { + d2d_26m_fck: d2d_26m_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&sys_ck>; @@ -57,7 +57,7 @@ ti,bit-shift = <3>; }; - fshostusb_fck: fshostusb_fck { + fshostusb_fck: fshostusb_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -65,7 +65,7 @@ ti,bit-shift = <5>; }; - ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 { + ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&corex2_fck>; @@ -73,7 +73,7 @@ reg = <0x0a00>; }; - ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 { + ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&corex2_fck>; @@ -96,7 +96,7 @@ clock-div = <2>; }; - hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 { + hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 { #clock-cells = <0>; compatible = "ti,omap3-no-wait-interface-clock"; clocks = <&core_l3_ick>; @@ -104,7 +104,7 @@ ti,bit-shift = <4>; }; - fac_ick: fac_ick { + fac_ick: fac_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -120,7 +120,7 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es1 { + ssi_ick: ssi_ick_3430es1@a10 { #clock-cells = <0>; compatible = "ti,omap3-no-wait-interface-clock"; clocks = <&ssi_l4_ick>; @@ -128,7 +128,7 @@ ti,bit-shift = <0>; }; - usb_l4_gate_ick: usb_l4_gate_ick { + usb_l4_gate_ick: usb_l4_gate_ick@a10 { #clock-cells = <0>; compatible = "ti,composite-interface-clock"; clocks = <&l4_ick>; @@ -136,7 +136,7 @@ reg = <0x0a10>; }; - usb_l4_div_ick: usb_l4_div_ick { + usb_l4_div_ick: usb_l4_div_ick@a40 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&l4_ick>; @@ -152,7 +152,7 @@ clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; }; - dss1_alwon_fck: dss1_alwon_fck_3430es1 { + dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m4x2_ck>; @@ -161,7 +161,7 @@ ti,set-rate-parent; }; - dss_ick: dss_ick_3430es1 { + dss_ick: dss_ick_3430es1@e10 { #clock-cells = <0>; compatible = "ti,omap3-no-wait-interface-clock"; clocks = <&l4_ick>; diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index b02017b7630e..858aa0796ec8 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -16,7 +16,7 @@ clock-div = <1>; }; - aes1_ick: aes1_ick { + aes1_ick: aes1_ick@a14 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&security_l4_ick2>; @@ -24,7 +24,7 @@ reg = <0x0a14>; }; - rng_ick: rng_ick { + rng_ick: rng_ick@a14 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&security_l4_ick2>; @@ -32,7 +32,7 @@ ti,bit-shift = <2>; }; - sha11_ick: sha11_ick { + sha11_ick: sha11_ick@a14 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&security_l4_ick2>; @@ -40,7 +40,7 @@ ti,bit-shift = <1>; }; - des1_ick: des1_ick { + des1_ick: des1_ick@a14 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&security_l4_ick2>; @@ -48,7 +48,7 @@ ti,bit-shift = <0>; }; - cam_mclk: cam_mclk { + cam_mclk: cam_mclk@f00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m5x2_ck>; @@ -57,7 +57,7 @@ ti,set-rate-parent; }; - cam_ick: cam_ick { + cam_ick: cam_ick@f10 { #clock-cells = <0>; compatible = "ti,omap3-no-wait-interface-clock"; clocks = <&l4_ick>; @@ -65,7 +65,7 @@ ti,bit-shift = <0>; }; - csi2_96m_fck: csi2_96m_fck { + csi2_96m_fck: csi2_96m_fck@f00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&core_96m_fck>; @@ -81,7 +81,7 @@ clock-div = <1>; }; - pka_ick: pka_ick { + pka_ick: pka_ick@a14 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&security_l3_ick>; @@ -89,7 +89,7 @@ ti,bit-shift = <4>; }; - icr_ick: icr_ick { + icr_ick: icr_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -97,7 +97,7 @@ ti,bit-shift = <29>; }; - des2_ick: des2_ick { + des2_ick: des2_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -105,7 +105,7 @@ ti,bit-shift = <26>; }; - mspro_ick: mspro_ick { + mspro_ick: mspro_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -113,7 +113,7 @@ ti,bit-shift = <23>; }; - mailboxes_ick: mailboxes_ick { + mailboxes_ick: mailboxes_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -129,7 +129,7 @@ clock-div = <1>; }; - sr1_fck: sr1_fck { + sr1_fck: sr1_fck@c00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&sys_ck>; @@ -137,7 +137,7 @@ ti,bit-shift = <6>; }; - sr2_fck: sr2_fck { + sr2_fck: sr2_fck@c00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&sys_ck>; @@ -153,7 +153,7 @@ clock-div = <1>; }; - dpll2_fck: dpll2_fck { + dpll2_fck: dpll2_fck@40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&core_ck>; @@ -163,7 +163,7 @@ ti,index-starts-at-one; }; - dpll2_ck: dpll2_ck { + dpll2_ck: dpll2_ck@4 { #clock-cells = <0>; compatible = "ti,omap3-dpll-clock"; clocks = <&sys_ck>, <&dpll2_fck>; @@ -173,7 +173,7 @@ ti,low-power-bypass; }; - dpll2_m2_ck: dpll2_m2_ck { + dpll2_m2_ck: dpll2_m2_ck@44 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll2_ck>; @@ -182,7 +182,7 @@ ti,index-starts-at-one; }; - iva2_ck: iva2_ck { + iva2_ck: iva2_ck@0 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&dpll2_m2_ck>; @@ -190,7 +190,7 @@ ti,bit-shift = <0>; }; - modem_fck: modem_fck { + modem_fck: modem_fck@a00 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&sys_ck>; @@ -198,7 +198,7 @@ ti,bit-shift = <31>; }; - sad2d_ick: sad2d_ick { + sad2d_ick: sad2d_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l3_ick>; @@ -206,7 +206,7 @@ ti,bit-shift = <3>; }; - mad2d_ick: mad2d_ick { + mad2d_ick: mad2d_ick@a18 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&l3_ick>; @@ -214,7 +214,7 @@ ti,bit-shift = <3>; }; - mspro_fck: mspro_fck { + mspro_fck: mspro_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 96f8ce7bd2af..e44656258225 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -55,7 +55,7 @@ }; }; - bandgap { + bandgap@48002524 { reg = <0x48002524 0x4>; compatible = "ti,omap34xx-bandgap"; #thermal-sensor-cells = <0>; diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi index 080fb3f4e429..15d18669000e 100644 --- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi @@ -25,7 +25,7 @@ }; }; &cm_clocks { - dpll5_ck: dpll5_ck { + dpll5_ck: dpll5_ck@d04 { #clock-cells = <0>; compatible = "ti,omap3-dpll-clock"; clocks = <&sys_ck>, <&sys_ck>; @@ -34,7 +34,7 @@ ti,lock; }; - dpll5_m2_ck: dpll5_m2_ck { + dpll5_m2_ck: dpll5_m2_ck@d50 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll5_ck>; @@ -43,7 +43,7 @@ ti,index-starts-at-one; }; - sgx_gate_fck: sgx_gate_fck { + sgx_gate_fck: sgx_gate_fck@b00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&core_ck>; @@ -91,7 +91,7 @@ clock-div = <2>; }; - sgx_mux_fck: sgx_mux_fck { + sgx_mux_fck: sgx_mux_fck@b40 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>; @@ -104,7 +104,7 @@ clocks = <&sgx_gate_fck>, <&sgx_mux_fck>; }; - sgx_ick: sgx_ick { + sgx_ick: sgx_ick@b10 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&l3_ick>; @@ -112,7 +112,7 @@ ti,bit-shift = <0>; }; - cpefuse_fck: cpefuse_fck { + cpefuse_fck: cpefuse_fck@a08 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_ck>; @@ -120,7 +120,7 @@ ti,bit-shift = <0>; }; - ts_fck: ts_fck { + ts_fck: ts_fck@a08 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&omap_32k_fck>; @@ -128,7 +128,7 @@ ti,bit-shift = <1>; }; - usbtll_fck: usbtll_fck { + usbtll_fck: usbtll_fck@a08 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&dpll5_m2_ck>; @@ -136,7 +136,7 @@ ti,bit-shift = <2>; }; - usbtll_ick: usbtll_ick { + usbtll_ick: usbtll_ick@a18 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -144,7 +144,7 @@ ti,bit-shift = <2>; }; - mmchs3_ick: mmchs3_ick { + mmchs3_ick: mmchs3_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -152,7 +152,7 @@ ti,bit-shift = <30>; }; - mmchs3_fck: mmchs3_fck { + mmchs3_fck: mmchs3_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; @@ -160,7 +160,7 @@ ti,bit-shift = <30>; }; - dss1_alwon_fck: dss1_alwon_fck_3430es2 { + dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 { #clock-cells = <0>; compatible = "ti,dss-gate-clock"; clocks = <&dpll4_m4x2_ck>; @@ -169,7 +169,7 @@ ti,set-rate-parent; }; - dss_ick: dss_ick_3430es2 { + dss_ick: dss_ick_3430es2@e10 { #clock-cells = <0>; compatible = "ti,omap3-dss-interface-clock"; clocks = <&l4_ick>; @@ -177,7 +177,7 @@ ti,bit-shift = <0>; }; - usbhost_120m_fck: usbhost_120m_fck { + usbhost_120m_fck: usbhost_120m_fck@1400 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll5_m2_ck>; @@ -185,7 +185,7 @@ ti,bit-shift = <1>; }; - usbhost_48m_fck: usbhost_48m_fck { + usbhost_48m_fck: usbhost_48m_fck@1400 { #clock-cells = <0>; compatible = "ti,dss-gate-clock"; clocks = <&omap_48m_fck>; @@ -193,7 +193,7 @@ ti,bit-shift = <0>; }; - usbhost_ick: usbhost_ick { + usbhost_ick: usbhost_ick@1410 { #clock-cells = <0>; compatible = "ti,omap3-dss-interface-clock"; clocks = <&l4_ick>; diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 200ae3a5cbbb..a21d1f021267 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -8,14 +8,14 @@ * published by the Free Software Foundation. */ &cm_clocks { - dpll4_ck: dpll4_ck { + dpll4_ck: dpll4_ck@d00 { #clock-cells = <0>; compatible = "ti,omap3-dpll-per-j-type-clock"; clocks = <&sys_ck>, <&sys_ck>; reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>; }; - dpll4_m5x2_ck: dpll4_m5x2_ck { + dpll4_m5x2_ck: dpll4_m5x2_ck@d00 { #clock-cells = <0>; compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m5x2_mul_ck>; @@ -25,7 +25,7 @@ ti,set-bit-to-disable; }; - dpll4_m2x2_ck: dpll4_m2x2_ck { + dpll4_m2x2_ck: dpll4_m2x2_ck@d00 { #clock-cells = <0>; compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m2x2_mul_ck>; @@ -34,7 +34,7 @@ ti,set-bit-to-disable; }; - dpll3_m3x2_ck: dpll3_m3x2_ck { + dpll3_m3x2_ck: dpll3_m3x2_ck@d00 { #clock-cells = <0>; compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll3_m3x2_mul_ck>; @@ -43,7 +43,7 @@ ti,set-bit-to-disable; }; - dpll4_m3x2_ck: dpll4_m3x2_ck { + dpll4_m3x2_ck: dpll4_m3x2_ck@d00 { #clock-cells = <0>; compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m3x2_mul_ck>; @@ -52,7 +52,7 @@ ti,set-bit-to-disable; }; - dpll4_m6x2_ck: dpll4_m6x2_ck { + dpll4_m6x2_ck: dpll4_m6x2_ck@d00 { #clock-cells = <0>; compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m6x2_mul_ck>; @@ -61,7 +61,7 @@ ti,set-bit-to-disable; }; - uart4_fck: uart4_fck { + uart4_fck: uart4_fck@1000 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&per_48m_fck>; diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi index 877318c28364..1a4fbdf0d9cc 100644 --- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &cm_clocks { - ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 { + ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&corex2_fck>; @@ -16,7 +16,7 @@ reg = <0x0a00>; }; - ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 { + ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&corex2_fck>; @@ -39,7 +39,7 @@ clock-div = <2>; }; - hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 { + hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 { #clock-cells = <0>; compatible = "ti,omap3-hsotgusb-interface-clock"; clocks = <&core_l3_ick>; @@ -55,7 +55,7 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es2 { + ssi_ick: ssi_ick_3430es2@a10 { #clock-cells = <0>; compatible = "ti,omap3-ssi-interface-clock"; clocks = <&ssi_l4_ick>; @@ -63,7 +63,7 @@ ti,bit-shift = <0>; }; - usim_gate_fck: usim_gate_fck { + usim_gate_fck: usim_gate_fck@c00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&omap_96m_fck>; @@ -143,7 +143,7 @@ clock-div = <20>; }; - usim_mux_fck: usim_mux_fck { + usim_mux_fck: usim_mux_fck@c40 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; @@ -158,7 +158,7 @@ clocks = <&usim_gate_fck>, <&usim_mux_fck>; }; - usim_ick: usim_ick { + usim_ick: usim_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index f19c87bd6bf3..8b7979153008 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -44,7 +44,7 @@ abb_mpu_iva: regulator-abb-mpu { compatible = "ti,abb-v1"; regulator-name = "abb_mpu_iva"; - #address-cell = <0>; + #address-cells = <0>; #size-cells = <0>; reg = <0x483072f0 0x8>, <0x48306818 0x4>; reg-names = "base-address", "int-address"; @@ -87,7 +87,7 @@ }; }; - bandgap { + bandgap@48002524 { reg = <0x48002524 0x4>; compatible = "ti,omap36xx-bandgap"; #thermal-sensor-cells = <0>; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index bbba5bdc4bc9..9bd91641aa7c 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -14,14 +14,14 @@ clock-frequency = <16800000>; }; - osc_sys_ck: osc_sys_ck { + osc_sys_ck: osc_sys_ck@d40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>; reg = <0x0d40>; }; - sys_ck: sys_ck { + sys_ck: sys_ck@1270 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&osc_sys_ck>; @@ -31,7 +31,7 @@ ti,index-starts-at-one; }; - sys_clkout1: sys_clkout1 { + sys_clkout1: sys_clkout1@d70 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&osc_sys_ck>; @@ -81,7 +81,7 @@ }; &scm_clocks { - mcbsp5_mux_fck: mcbsp5_mux_fck { + mcbsp5_mux_fck: mcbsp5_mux_fck@68 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; @@ -95,7 +95,7 @@ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; }; - mcbsp1_mux_fck: mcbsp1_mux_fck { + mcbsp1_mux_fck: mcbsp1_mux_fck@4 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_96m_fck>, <&mcbsp_clks>; @@ -109,7 +109,7 @@ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; }; - mcbsp2_mux_fck: mcbsp2_mux_fck { + mcbsp2_mux_fck: mcbsp2_mux_fck@4 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; @@ -123,7 +123,7 @@ clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; }; - mcbsp3_mux_fck: mcbsp3_mux_fck { + mcbsp3_mux_fck: mcbsp3_mux_fck@68 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; @@ -136,7 +136,7 @@ clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; }; - mcbsp4_mux_fck: mcbsp4_mux_fck { + mcbsp4_mux_fck: mcbsp4_mux_fck@68 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&per_96m_fck>, <&mcbsp_clks>; @@ -193,14 +193,14 @@ clock-frequency = <38400000>; }; - dpll4_ck: dpll4_ck { + dpll4_ck: dpll4_ck@d00 { #clock-cells = <0>; compatible = "ti,omap3-dpll-per-clock"; clocks = <&sys_ck>, <&sys_ck>; reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>; }; - dpll4_m2_ck: dpll4_m2_ck { + dpll4_m2_ck: dpll4_m2_ck@d48 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; @@ -217,7 +217,7 @@ clock-div = <1>; }; - dpll4_m2x2_ck: dpll4_m2x2_ck { + dpll4_m2x2_ck: dpll4_m2x2_ck@d00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m2x2_mul_ck>; @@ -234,14 +234,14 @@ clock-div = <1>; }; - dpll3_ck: dpll3_ck { + dpll3_ck: dpll3_ck@d00 { #clock-cells = <0>; compatible = "ti,omap3-dpll-core-clock"; clocks = <&sys_ck>, <&sys_ck>; reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>; }; - dpll3_m3_ck: dpll3_m3_ck { + dpll3_m3_ck: dpll3_m3_ck@1140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll3_ck>; @@ -259,7 +259,7 @@ clock-div = <1>; }; - dpll3_m3x2_ck: dpll3_m3x2_ck { + dpll3_m3x2_ck: dpll3_m3x2_ck@d00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll3_m3x2_mul_ck>; @@ -288,7 +288,7 @@ clock-frequency = <0x0>; }; - dpll3_m2_ck: dpll3_m2_ck { + dpll3_m2_ck: dpll3_m2_ck@d40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll3_ck>; @@ -306,7 +306,7 @@ clock-div = <1>; }; - dpll1_fck: dpll1_fck { + dpll1_fck: dpll1_fck@940 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&core_ck>; @@ -316,7 +316,7 @@ ti,index-starts-at-one; }; - dpll1_ck: dpll1_ck { + dpll1_ck: dpll1_ck@904 { #clock-cells = <0>; compatible = "ti,omap3-dpll-clock"; clocks = <&sys_ck>, <&dpll1_fck>; @@ -331,7 +331,7 @@ clock-div = <1>; }; - dpll1_x2m2_ck: dpll1_x2m2_ck { + dpll1_x2m2_ck: dpll1_x2m2_ck@944 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll1_x2_ck>; @@ -348,7 +348,7 @@ clock-div = <1>; }; - omap_96m_fck: omap_96m_fck { + omap_96m_fck: omap_96m_fck@d40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&cm_96m_fck>, <&sys_ck>; @@ -356,7 +356,7 @@ reg = <0x0d40>; }; - dpll4_m3_ck: dpll4_m3_ck { + dpll4_m3_ck: dpll4_m3_ck@e40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; @@ -374,7 +374,7 @@ clock-div = <1>; }; - dpll4_m3x2_ck: dpll4_m3x2_ck { + dpll4_m3x2_ck: dpll4_m3x2_ck@d00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m3x2_mul_ck>; @@ -383,7 +383,7 @@ ti,set-bit-to-disable; }; - omap_54m_fck: omap_54m_fck { + omap_54m_fck: omap_54m_fck@d40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; @@ -399,7 +399,7 @@ clock-div = <2>; }; - omap_48m_fck: omap_48m_fck { + omap_48m_fck: omap_48m_fck@d40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&cm_96m_d2_fck>, <&sys_altclk>; @@ -415,7 +415,7 @@ clock-div = <4>; }; - dpll4_m4_ck: dpll4_m4_ck { + dpll4_m4_ck: dpll4_m4_ck@e40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; @@ -433,7 +433,7 @@ ti,set-rate-parent; }; - dpll4_m4x2_ck: dpll4_m4x2_ck { + dpll4_m4x2_ck: dpll4_m4x2_ck@d00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m4x2_mul_ck>; @@ -443,7 +443,7 @@ ti,set-rate-parent; }; - dpll4_m5_ck: dpll4_m5_ck { + dpll4_m5_ck: dpll4_m5_ck@f40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; @@ -461,7 +461,7 @@ ti,set-rate-parent; }; - dpll4_m5x2_ck: dpll4_m5x2_ck { + dpll4_m5x2_ck: dpll4_m5x2_ck@d00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m5x2_mul_ck>; @@ -471,7 +471,7 @@ ti,set-rate-parent; }; - dpll4_m6_ck: dpll4_m6_ck { + dpll4_m6_ck: dpll4_m6_ck@1140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; @@ -489,7 +489,7 @@ clock-div = <1>; }; - dpll4_m6x2_ck: dpll4_m6x2_ck { + dpll4_m6x2_ck: dpll4_m6x2_ck@d00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll4_m6x2_mul_ck>; @@ -506,7 +506,7 @@ clock-div = <1>; }; - clkout2_src_gate_ck: clkout2_src_gate_ck { + clkout2_src_gate_ck: clkout2_src_gate_ck@d70 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&core_ck>; @@ -514,7 +514,7 @@ reg = <0x0d70>; }; - clkout2_src_mux_ck: clkout2_src_mux_ck { + clkout2_src_mux_ck: clkout2_src_mux_ck@d70 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; @@ -527,7 +527,7 @@ clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>; }; - sys_clkout2: sys_clkout2 { + sys_clkout2: sys_clkout2@d70 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&clkout2_src_ck>; @@ -545,7 +545,7 @@ clock-div = <1>; }; - arm_fck: arm_fck { + arm_fck: arm_fck@924 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mpu_ck>; @@ -561,7 +561,7 @@ clock-div = <1>; }; - l3_ick: l3_ick { + l3_ick: l3_ick@a40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&core_ck>; @@ -570,7 +570,7 @@ ti,index-starts-at-one; }; - l4_ick: l4_ick { + l4_ick: l4_ick@a40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&l3_ick>; @@ -580,7 +580,7 @@ ti,index-starts-at-one; }; - rm_ick: rm_ick { + rm_ick: rm_ick@c40 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&l4_ick>; @@ -590,7 +590,7 @@ ti,index-starts-at-one; }; - gpt10_gate_fck: gpt10_gate_fck { + gpt10_gate_fck: gpt10_gate_fck@a00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -598,7 +598,7 @@ reg = <0x0a00>; }; - gpt10_mux_fck: gpt10_mux_fck { + gpt10_mux_fck: gpt10_mux_fck@a40 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -612,7 +612,7 @@ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; }; - gpt11_gate_fck: gpt11_gate_fck { + gpt11_gate_fck: gpt11_gate_fck@a00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -620,7 +620,7 @@ reg = <0x0a00>; }; - gpt11_mux_fck: gpt11_mux_fck { + gpt11_mux_fck: gpt11_mux_fck@a40 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -642,7 +642,7 @@ clock-div = <1>; }; - mmchs2_fck: mmchs2_fck { + mmchs2_fck: mmchs2_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; @@ -650,7 +650,7 @@ ti,bit-shift = <25>; }; - mmchs1_fck: mmchs1_fck { + mmchs1_fck: mmchs1_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; @@ -658,7 +658,7 @@ ti,bit-shift = <24>; }; - i2c3_fck: i2c3_fck { + i2c3_fck: i2c3_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; @@ -666,7 +666,7 @@ ti,bit-shift = <17>; }; - i2c2_fck: i2c2_fck { + i2c2_fck: i2c2_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; @@ -674,7 +674,7 @@ ti,bit-shift = <16>; }; - i2c1_fck: i2c1_fck { + i2c1_fck: i2c1_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_96m_fck>; @@ -682,7 +682,7 @@ ti,bit-shift = <15>; }; - mcbsp5_gate_fck: mcbsp5_gate_fck { + mcbsp5_gate_fck: mcbsp5_gate_fck@a00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -690,7 +690,7 @@ reg = <0x0a00>; }; - mcbsp1_gate_fck: mcbsp1_gate_fck { + mcbsp1_gate_fck: mcbsp1_gate_fck@a00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -706,7 +706,7 @@ clock-div = <1>; }; - mcspi4_fck: mcspi4_fck { + mcspi4_fck: mcspi4_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -714,7 +714,7 @@ ti,bit-shift = <21>; }; - mcspi3_fck: mcspi3_fck { + mcspi3_fck: mcspi3_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -722,7 +722,7 @@ ti,bit-shift = <20>; }; - mcspi2_fck: mcspi2_fck { + mcspi2_fck: mcspi2_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -730,7 +730,7 @@ ti,bit-shift = <19>; }; - mcspi1_fck: mcspi1_fck { + mcspi1_fck: mcspi1_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -738,7 +738,7 @@ ti,bit-shift = <18>; }; - uart2_fck: uart2_fck { + uart2_fck: uart2_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -746,7 +746,7 @@ ti,bit-shift = <14>; }; - uart1_fck: uart1_fck { + uart1_fck: uart1_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_48m_fck>; @@ -762,7 +762,7 @@ clock-div = <1>; }; - hdq_fck: hdq_fck { + hdq_fck: hdq_fck@a00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_12m_fck>; @@ -778,7 +778,7 @@ clock-div = <1>; }; - sdrc_ick: sdrc_ick { + sdrc_ick: sdrc_ick@a10 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&core_l3_ick>; @@ -802,7 +802,7 @@ clock-div = <1>; }; - mmchs2_ick: mmchs2_ick { + mmchs2_ick: mmchs2_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -810,7 +810,7 @@ ti,bit-shift = <25>; }; - mmchs1_ick: mmchs1_ick { + mmchs1_ick: mmchs1_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -818,7 +818,7 @@ ti,bit-shift = <24>; }; - hdq_ick: hdq_ick { + hdq_ick: hdq_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -826,7 +826,7 @@ ti,bit-shift = <22>; }; - mcspi4_ick: mcspi4_ick { + mcspi4_ick: mcspi4_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -834,7 +834,7 @@ ti,bit-shift = <21>; }; - mcspi3_ick: mcspi3_ick { + mcspi3_ick: mcspi3_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -842,7 +842,7 @@ ti,bit-shift = <20>; }; - mcspi2_ick: mcspi2_ick { + mcspi2_ick: mcspi2_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -850,7 +850,7 @@ ti,bit-shift = <19>; }; - mcspi1_ick: mcspi1_ick { + mcspi1_ick: mcspi1_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -858,7 +858,7 @@ ti,bit-shift = <18>; }; - i2c3_ick: i2c3_ick { + i2c3_ick: i2c3_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -866,7 +866,7 @@ ti,bit-shift = <17>; }; - i2c2_ick: i2c2_ick { + i2c2_ick: i2c2_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -874,7 +874,7 @@ ti,bit-shift = <16>; }; - i2c1_ick: i2c1_ick { + i2c1_ick: i2c1_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -882,7 +882,7 @@ ti,bit-shift = <15>; }; - uart2_ick: uart2_ick { + uart2_ick: uart2_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -890,7 +890,7 @@ ti,bit-shift = <14>; }; - uart1_ick: uart1_ick { + uart1_ick: uart1_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -898,7 +898,7 @@ ti,bit-shift = <13>; }; - gpt11_ick: gpt11_ick { + gpt11_ick: gpt11_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -906,7 +906,7 @@ ti,bit-shift = <12>; }; - gpt10_ick: gpt10_ick { + gpt10_ick: gpt10_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -914,7 +914,7 @@ ti,bit-shift = <11>; }; - mcbsp5_ick: mcbsp5_ick { + mcbsp5_ick: mcbsp5_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -922,7 +922,7 @@ ti,bit-shift = <10>; }; - mcbsp1_ick: mcbsp1_ick { + mcbsp1_ick: mcbsp1_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -930,7 +930,7 @@ ti,bit-shift = <9>; }; - omapctrl_ick: omapctrl_ick { + omapctrl_ick: omapctrl_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -938,7 +938,7 @@ ti,bit-shift = <6>; }; - dss_tv_fck: dss_tv_fck { + dss_tv_fck: dss_tv_fck@e00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&omap_54m_fck>; @@ -946,7 +946,7 @@ ti,bit-shift = <2>; }; - dss_96m_fck: dss_96m_fck { + dss_96m_fck: dss_96m_fck@e00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&omap_96m_fck>; @@ -954,7 +954,7 @@ ti,bit-shift = <2>; }; - dss2_alwon_fck: dss2_alwon_fck { + dss2_alwon_fck: dss2_alwon_fck@e00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_ck>; @@ -968,7 +968,7 @@ clock-frequency = <0>; }; - gpt1_gate_fck: gpt1_gate_fck { + gpt1_gate_fck: gpt1_gate_fck@c00 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -976,7 +976,7 @@ reg = <0x0c00>; }; - gpt1_mux_fck: gpt1_mux_fck { + gpt1_mux_fck: gpt1_mux_fck@c40 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -989,7 +989,7 @@ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; }; - aes2_ick: aes2_ick { + aes2_ick: aes2_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -1005,7 +1005,7 @@ clock-div = <1>; }; - gpio1_dbck: gpio1_dbck { + gpio1_dbck: gpio1_dbck@c00 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&wkup_32k_fck>; @@ -1013,7 +1013,7 @@ ti,bit-shift = <3>; }; - sha12_ick: sha12_ick { + sha12_ick: sha12_ick@a10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&core_l4_ick>; @@ -1021,7 +1021,7 @@ ti,bit-shift = <27>; }; - wdt2_fck: wdt2_fck { + wdt2_fck: wdt2_fck@c00 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&wkup_32k_fck>; @@ -1029,7 +1029,7 @@ ti,bit-shift = <5>; }; - wdt2_ick: wdt2_ick { + wdt2_ick: wdt2_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; @@ -1037,7 +1037,7 @@ ti,bit-shift = <5>; }; - wdt1_ick: wdt1_ick { + wdt1_ick: wdt1_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; @@ -1045,7 +1045,7 @@ ti,bit-shift = <4>; }; - gpio1_ick: gpio1_ick { + gpio1_ick: gpio1_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; @@ -1053,7 +1053,7 @@ ti,bit-shift = <3>; }; - omap_32ksync_ick: omap_32ksync_ick { + omap_32ksync_ick: omap_32ksync_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; @@ -1061,7 +1061,7 @@ ti,bit-shift = <2>; }; - gpt12_ick: gpt12_ick { + gpt12_ick: gpt12_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; @@ -1069,7 +1069,7 @@ ti,bit-shift = <1>; }; - gpt1_ick: gpt1_ick { + gpt1_ick: gpt1_ick@c10 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&wkup_l4_ick>; @@ -1093,7 +1093,7 @@ clock-div = <1>; }; - uart3_fck: uart3_fck { + uart3_fck: uart3_fck@1000 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&per_48m_fck>; @@ -1101,7 +1101,7 @@ ti,bit-shift = <11>; }; - gpt2_gate_fck: gpt2_gate_fck { + gpt2_gate_fck: gpt2_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1109,7 +1109,7 @@ reg = <0x1000>; }; - gpt2_mux_fck: gpt2_mux_fck { + gpt2_mux_fck: gpt2_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1122,7 +1122,7 @@ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; }; - gpt3_gate_fck: gpt3_gate_fck { + gpt3_gate_fck: gpt3_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1130,7 +1130,7 @@ reg = <0x1000>; }; - gpt3_mux_fck: gpt3_mux_fck { + gpt3_mux_fck: gpt3_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1144,7 +1144,7 @@ clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; }; - gpt4_gate_fck: gpt4_gate_fck { + gpt4_gate_fck: gpt4_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1152,7 +1152,7 @@ reg = <0x1000>; }; - gpt4_mux_fck: gpt4_mux_fck { + gpt4_mux_fck: gpt4_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1166,7 +1166,7 @@ clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; }; - gpt5_gate_fck: gpt5_gate_fck { + gpt5_gate_fck: gpt5_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1174,7 +1174,7 @@ reg = <0x1000>; }; - gpt5_mux_fck: gpt5_mux_fck { + gpt5_mux_fck: gpt5_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1188,7 +1188,7 @@ clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; }; - gpt6_gate_fck: gpt6_gate_fck { + gpt6_gate_fck: gpt6_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1196,7 +1196,7 @@ reg = <0x1000>; }; - gpt6_mux_fck: gpt6_mux_fck { + gpt6_mux_fck: gpt6_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1210,7 +1210,7 @@ clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; }; - gpt7_gate_fck: gpt7_gate_fck { + gpt7_gate_fck: gpt7_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1218,7 +1218,7 @@ reg = <0x1000>; }; - gpt7_mux_fck: gpt7_mux_fck { + gpt7_mux_fck: gpt7_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1232,7 +1232,7 @@ clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; }; - gpt8_gate_fck: gpt8_gate_fck { + gpt8_gate_fck: gpt8_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1240,7 +1240,7 @@ reg = <0x1000>; }; - gpt8_mux_fck: gpt8_mux_fck { + gpt8_mux_fck: gpt8_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1254,7 +1254,7 @@ clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; }; - gpt9_gate_fck: gpt9_gate_fck { + gpt9_gate_fck: gpt9_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&sys_ck>; @@ -1262,7 +1262,7 @@ reg = <0x1000>; }; - gpt9_mux_fck: gpt9_mux_fck { + gpt9_mux_fck: gpt9_mux_fck@1040 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&omap_32k_fck>, <&sys_ck>; @@ -1284,7 +1284,7 @@ clock-div = <1>; }; - gpio6_dbck: gpio6_dbck { + gpio6_dbck: gpio6_dbck@1000 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&per_32k_alwon_fck>; @@ -1292,7 +1292,7 @@ ti,bit-shift = <17>; }; - gpio5_dbck: gpio5_dbck { + gpio5_dbck: gpio5_dbck@1000 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&per_32k_alwon_fck>; @@ -1300,7 +1300,7 @@ ti,bit-shift = <16>; }; - gpio4_dbck: gpio4_dbck { + gpio4_dbck: gpio4_dbck@1000 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&per_32k_alwon_fck>; @@ -1308,7 +1308,7 @@ ti,bit-shift = <15>; }; - gpio3_dbck: gpio3_dbck { + gpio3_dbck: gpio3_dbck@1000 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&per_32k_alwon_fck>; @@ -1316,7 +1316,7 @@ ti,bit-shift = <14>; }; - gpio2_dbck: gpio2_dbck { + gpio2_dbck: gpio2_dbck@1000 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&per_32k_alwon_fck>; @@ -1324,7 +1324,7 @@ ti,bit-shift = <13>; }; - wdt3_fck: wdt3_fck { + wdt3_fck: wdt3_fck@1000 { #clock-cells = <0>; compatible = "ti,wait-gate-clock"; clocks = <&per_32k_alwon_fck>; @@ -1340,7 +1340,7 @@ clock-div = <1>; }; - gpio6_ick: gpio6_ick { + gpio6_ick: gpio6_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1348,7 +1348,7 @@ ti,bit-shift = <17>; }; - gpio5_ick: gpio5_ick { + gpio5_ick: gpio5_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1356,7 +1356,7 @@ ti,bit-shift = <16>; }; - gpio4_ick: gpio4_ick { + gpio4_ick: gpio4_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1364,7 +1364,7 @@ ti,bit-shift = <15>; }; - gpio3_ick: gpio3_ick { + gpio3_ick: gpio3_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1372,7 +1372,7 @@ ti,bit-shift = <14>; }; - gpio2_ick: gpio2_ick { + gpio2_ick: gpio2_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1380,7 +1380,7 @@ ti,bit-shift = <13>; }; - wdt3_ick: wdt3_ick { + wdt3_ick: wdt3_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1388,7 +1388,7 @@ ti,bit-shift = <12>; }; - uart3_ick: uart3_ick { + uart3_ick: uart3_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1396,7 +1396,7 @@ ti,bit-shift = <11>; }; - uart4_ick: uart4_ick { + uart4_ick: uart4_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1404,7 +1404,7 @@ ti,bit-shift = <18>; }; - gpt9_ick: gpt9_ick { + gpt9_ick: gpt9_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1412,7 +1412,7 @@ ti,bit-shift = <10>; }; - gpt8_ick: gpt8_ick { + gpt8_ick: gpt8_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1420,7 +1420,7 @@ ti,bit-shift = <9>; }; - gpt7_ick: gpt7_ick { + gpt7_ick: gpt7_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1428,7 +1428,7 @@ ti,bit-shift = <8>; }; - gpt6_ick: gpt6_ick { + gpt6_ick: gpt6_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1436,7 +1436,7 @@ ti,bit-shift = <7>; }; - gpt5_ick: gpt5_ick { + gpt5_ick: gpt5_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1444,7 +1444,7 @@ ti,bit-shift = <6>; }; - gpt4_ick: gpt4_ick { + gpt4_ick: gpt4_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1452,7 +1452,7 @@ ti,bit-shift = <5>; }; - gpt3_ick: gpt3_ick { + gpt3_ick: gpt3_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1460,7 +1460,7 @@ ti,bit-shift = <4>; }; - gpt2_ick: gpt2_ick { + gpt2_ick: gpt2_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1468,7 +1468,7 @@ ti,bit-shift = <3>; }; - mcbsp2_ick: mcbsp2_ick { + mcbsp2_ick: mcbsp2_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1476,7 +1476,7 @@ ti,bit-shift = <0>; }; - mcbsp3_ick: mcbsp3_ick { + mcbsp3_ick: mcbsp3_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1484,7 +1484,7 @@ ti,bit-shift = <1>; }; - mcbsp4_ick: mcbsp4_ick { + mcbsp4_ick: mcbsp4_ick@1010 { #clock-cells = <0>; compatible = "ti,omap3-interface-clock"; clocks = <&per_l4_ick>; @@ -1492,7 +1492,7 @@ ti,bit-shift = <2>; }; - mcbsp2_gate_fck: mcbsp2_gate_fck { + mcbsp2_gate_fck: mcbsp2_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -1500,7 +1500,7 @@ reg = <0x1000>; }; - mcbsp3_gate_fck: mcbsp3_gate_fck { + mcbsp3_gate_fck: mcbsp3_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -1508,7 +1508,7 @@ reg = <0x1000>; }; - mcbsp4_gate_fck: mcbsp4_gate_fck { + mcbsp4_gate_fck: mcbsp4_gate_fck@1000 { #clock-cells = <0>; compatible = "ti,composite-gate-clock"; clocks = <&mcbsp_clks>; @@ -1516,7 +1516,7 @@ reg = <0x1000>; }; - emu_src_mux_ck: emu_src_mux_ck { + emu_src_mux_ck: emu_src_mux_ck@1140 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; @@ -1529,7 +1529,7 @@ clocks = <&emu_src_mux_ck>; }; - pclk_fck: pclk_fck { + pclk_fck: pclk_fck@1140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&emu_src_ck>; @@ -1539,7 +1539,7 @@ ti,index-starts-at-one; }; - pclkx2_fck: pclkx2_fck { + pclkx2_fck: pclkx2_fck@1140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&emu_src_ck>; @@ -1549,7 +1549,7 @@ ti,index-starts-at-one; }; - atclk_fck: atclk_fck { + atclk_fck: atclk_fck@1140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&emu_src_ck>; @@ -1559,7 +1559,7 @@ ti,index-starts-at-one; }; - traceclk_src_fck: traceclk_src_fck { + traceclk_src_fck: traceclk_src_fck@1140 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; @@ -1567,7 +1567,7 @@ reg = <0x1140>; }; - traceclk_fck: traceclk_fck { + traceclk_fck: traceclk_fck@1140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&traceclk_src_fck>; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts new file mode 100644 index 000000000000..2251bd54e4e6 --- /dev/null +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -0,0 +1,182 @@ +/* + * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap443x.dtsi" + +/ { + model = "Amazon Kindle Fire (first generation)"; + compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + pwmleds { + compatible = "pwm-leds"; + + green { + label = "green"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + orange { + label = "orange"; + pwms = <&twl_pwm 1 7812500>; + max-brightness = <127>; + }; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat0 */ + OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat1 */ + OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat2 */ + OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat3 */ + OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4 */ + OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5 */ + OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6 */ + OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7 */ + OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_clk */ + OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_cmd */ + >; + }; + + usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */ + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) /* usba0_otg_dp */ + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* usba0_otg_dm */ + >; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* IRQ# = 7 */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + + twl_power: power { + compatible = "ti,twl6030-power"; + ti,system-power-controller; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; +}; + +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + vmmc-supply = <&vaux1>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_hs_pins>; + + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 49d032b846be..a17997f4e9aa 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -17,7 +17,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - sound: sound@0 { + sound: sound { compatible = "ti,abe-twl6040"; ti,model = "VAR-SOM-OM44"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 421fe9f8a9eb..3fdc51cd0fad 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -198,7 +198,7 @@ #size-cells = <1>; ranges = <0 0x5a0 0x170>; - pbias_regulator: pbias_regulator { + pbias_regulator: pbias_regulator@60 { compatible = "ti,pbias-omap4", "ti,pbias-omap"; reg = <0x60 0x4>; syscon = <&omap4_padconf_global>; @@ -370,6 +370,10 @@ ti,no-idle-on-init; clocks = <&l3_div_ck>; clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi index 2bd2166f88d3..f370d96a87e5 100644 --- a/arch/arm/boot/dts/omap443x-clocks.dtsi +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &prm_clocks { - bandgap_fclk: bandgap_fclk { + bandgap_fclk: bandgap_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index 0adfa1d1ef20..fc6a8610c24c 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -35,7 +35,7 @@ }; ocp { - bandgap: bandgap { + bandgap: bandgap@4a002260 { reg = <0x4a002260 0x4 0x4a00232C 0x4>; compatible = "ti,omap4430-bandgap"; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 5fa68f191af7..ef66e12e0a67 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -40,7 +40,7 @@ }; ocp { - bandgap: bandgap { + bandgap: bandgap@4a002260 { reg = <0x4a002260 0x4 0x4a00232C 0x4 0x4a002378 0x18>; diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi index be033e9803e9..fb5929b742d4 100644 --- a/arch/arm/boot/dts/omap446x-clocks.dtsi +++ b/arch/arm/boot/dts/omap446x-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &prm_clocks { - div_ts_ck: div_ts_ck { + div_ts_ck: div_ts_ck@1888 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&l4_wkup_clk_mux_ck>; @@ -17,7 +17,7 @@ ti,dividers = <8>, <16>, <32>; }; - bandgap_ts_fclk: bandgap_ts_fclk { + bandgap_ts_fclk: bandgap_ts_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&div_ts_ck>; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index f2c48f09824e..9573b37fbaa7 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -20,7 +20,7 @@ clock-frequency = <12000000>; }; - pad_clks_ck: pad_clks_ck { + pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&pad_clks_src_ck>; @@ -46,7 +46,7 @@ clock-frequency = <12000000>; }; - slimbus_clk: slimbus_clk { + slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&slimbus_src_clk>; @@ -132,21 +132,21 @@ clock-frequency = <60000000>; }; - dpll_abe_ck: dpll_abe_ck { + dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; - dpll_abe_x2_ck: dpll_abe_x2_ck { + dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; clocks = <&dpll_abe_ck>; reg = <0x01f0>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck { + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -165,7 +165,7 @@ clock-div = <8>; }; - abe_clk: abe_clk { + abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -174,7 +174,7 @@ ti,index-power-of-two; }; - aess_fclk: aess_fclk { + aess_fclk: aess_fclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&abe_clk>; @@ -183,7 +183,7 @@ reg = <0x0528>; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck { + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -194,7 +194,7 @@ ti,invert-autoidle-bit; }; - core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck { + core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; @@ -202,7 +202,7 @@ reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; @@ -215,7 +215,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_m6x2_ck: dpll_core_m6x2_ck { + dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -226,7 +226,7 @@ ti,invert-autoidle-bit; }; - dpll_core_m2_ck: dpll_core_m2_ck { + dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; @@ -245,7 +245,7 @@ clock-div = <2>; }; - dpll_core_m5x2_ck: dpll_core_m5x2_ck { + dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -256,7 +256,7 @@ ti,invert-autoidle-bit; }; - div_core_ck: div_core_ck { + div_core_ck: div_core_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_m5x2_ck>; @@ -264,7 +264,7 @@ ti,max-div = <2>; }; - div_iva_hs_clk: div_iva_hs_clk { + div_iva_hs_clk: div_iva_hs_clk@1dc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_m5x2_ck>; @@ -273,7 +273,7 @@ ti,index-power-of-two; }; - div_mpu_hs_clk: div_mpu_hs_clk { + div_mpu_hs_clk: div_mpu_hs_clk@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_m5x2_ck>; @@ -282,7 +282,7 @@ ti,index-power-of-two; }; - dpll_core_m4x2_ck: dpll_core_m4x2_ck { + dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -301,7 +301,7 @@ clock-div = <2>; }; - dpll_abe_m2_ck: dpll_abe_m2_ck { + dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_ck>; @@ -310,7 +310,7 @@ ti,index-starts-at-one; }; - dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck { + dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_x2_ck>; @@ -318,7 +318,7 @@ reg = <0x0134>; }; - dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck { + dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -333,7 +333,7 @@ clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>; }; - dpll_core_m7x2_ck: dpll_core_m7x2_ck { + dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -344,7 +344,7 @@ ti,invert-autoidle-bit; }; - iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck { + iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; @@ -352,7 +352,7 @@ reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck { + dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; @@ -365,7 +365,7 @@ clocks = <&dpll_iva_ck>; }; - dpll_iva_m4x2_ck: dpll_iva_m4x2_ck { + dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; @@ -376,7 +376,7 @@ ti,invert-autoidle-bit; }; - dpll_iva_m5x2_ck: dpll_iva_m5x2_ck { + dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; @@ -387,14 +387,14 @@ ti,invert-autoidle-bit; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -421,7 +421,7 @@ clock-div = <3>; }; - l3_div_ck: l3_div_ck { + l3_div_ck: l3_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&div_core_ck>; @@ -430,7 +430,7 @@ reg = <0x0100>; }; - l4_div_ck: l4_div_ck { + l4_div_ck: l4_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&l3_div_ck>; @@ -455,7 +455,7 @@ clock-div = <2>; }; - ocp_abe_iclk: ocp_abe_iclk { + ocp_abe_iclk: ocp_abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&aess_fclk>; @@ -472,7 +472,7 @@ clock-div = <4>; }; - dmic_sync_mux_ck: dmic_sync_mux_ck { + dmic_sync_mux_ck: dmic_sync_mux_ck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; @@ -480,7 +480,7 @@ reg = <0x0538>; }; - func_dmic_abe_gfclk: func_dmic_abe_gfclk { + func_dmic_abe_gfclk: func_dmic_abe_gfclk@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -488,7 +488,7 @@ reg = <0x0538>; }; - mcasp_sync_mux_ck: mcasp_sync_mux_ck { + mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; @@ -496,7 +496,7 @@ reg = <0x0540>; }; - func_mcasp_abe_gfclk: func_mcasp_abe_gfclk { + func_mcasp_abe_gfclk: func_mcasp_abe_gfclk@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -504,7 +504,7 @@ reg = <0x0540>; }; - mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck { + mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@548 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; @@ -512,7 +512,7 @@ reg = <0x0548>; }; - func_mcbsp1_gfclk: func_mcbsp1_gfclk { + func_mcbsp1_gfclk: func_mcbsp1_gfclk@548 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -520,7 +520,7 @@ reg = <0x0548>; }; - mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck { + mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; @@ -528,7 +528,7 @@ reg = <0x0550>; }; - func_mcbsp2_gfclk: func_mcbsp2_gfclk { + func_mcbsp2_gfclk: func_mcbsp2_gfclk@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -536,7 +536,7 @@ reg = <0x0550>; }; - mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck { + mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@558 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; @@ -544,7 +544,7 @@ reg = <0x0558>; }; - func_mcbsp3_gfclk: func_mcbsp3_gfclk { + func_mcbsp3_gfclk: func_mcbsp3_gfclk@558 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -552,7 +552,7 @@ reg = <0x0558>; }; - slimbus1_fclk_1: slimbus1_fclk_1 { + slimbus1_fclk_1: slimbus1_fclk_1@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_24m_clk>; @@ -560,7 +560,7 @@ reg = <0x0560>; }; - slimbus1_fclk_0: slimbus1_fclk_0 { + slimbus1_fclk_0: slimbus1_fclk_0@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&abe_24m_fclk>; @@ -568,7 +568,7 @@ reg = <0x0560>; }; - slimbus1_fclk_2: slimbus1_fclk_2 { + slimbus1_fclk_2: slimbus1_fclk_2@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&pad_clks_ck>; @@ -576,7 +576,7 @@ reg = <0x0560>; }; - slimbus1_slimbus_clk: slimbus1_slimbus_clk { + slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&slimbus_clk>; @@ -584,7 +584,7 @@ reg = <0x0560>; }; - timer5_sync_mux: timer5_sync_mux { + timer5_sync_mux: timer5_sync_mux@568 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; @@ -592,7 +592,7 @@ reg = <0x0568>; }; - timer6_sync_mux: timer6_sync_mux { + timer6_sync_mux: timer6_sync_mux@570 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; @@ -600,7 +600,7 @@ reg = <0x0570>; }; - timer7_sync_mux: timer7_sync_mux { + timer7_sync_mux: timer7_sync_mux@578 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; @@ -608,7 +608,7 @@ reg = <0x0578>; }; - timer8_sync_mux: timer8_sync_mux { + timer8_sync_mux: timer8_sync_mux@580 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; @@ -623,7 +623,7 @@ }; }; &prm_clocks { - sys_clkin_ck: sys_clkin_ck { + sys_clkin_ck: sys_clkin_ck@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; @@ -631,7 +631,7 @@ ti,index-starts-at-one; }; - abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck { + abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -639,7 +639,7 @@ reg = <0x0108>; }; - abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck { + abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -654,14 +654,14 @@ clock-div = <1>; }; - l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck { + l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; reg = <0x0108>; }; - syc_clk_div_ck: syc_clk_div_ck { + syc_clk_div_ck: syc_clk_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sys_clkin_ck>; @@ -669,7 +669,7 @@ ti,max-div = <2>; }; - gpio1_dbclk: gpio1_dbclk { + gpio1_dbclk: gpio1_dbclk@1838 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -677,7 +677,7 @@ reg = <0x1838>; }; - dmt1_clk_mux: dmt1_clk_mux { + dmt1_clk_mux: dmt1_clk_mux@1840 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -685,7 +685,7 @@ reg = <0x1840>; }; - usim_ck: usim_ck { + usim_ck: usim_ck@1858 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m4x2_ck>; @@ -694,7 +694,7 @@ ti,dividers = <14>, <18>; }; - usim_fclk: usim_fclk { + usim_fclk: usim_fclk@1858 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&usim_ck>; @@ -702,7 +702,7 @@ reg = <0x1858>; }; - pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck { + pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck@1a20 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>; @@ -710,7 +710,7 @@ reg = <0x1a20>; }; - pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck { + pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck@1a20 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>; @@ -718,7 +718,7 @@ reg = <0x1a20>; }; - stm_clk_div_ck: stm_clk_div_ck { + stm_clk_div_ck: stm_clk_div_ck@1a20 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&pmd_stm_clock_mux_ck>; @@ -728,7 +728,7 @@ ti,index-power-of-two; }; - trace_clk_div_div_ck: trace_clk_div_div_ck { + trace_clk_div_div_ck: trace_clk_div_div_ck@1a20 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&pmd_trace_clk_mux_ck>; @@ -752,7 +752,7 @@ }; &cm2_clocks { - per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck { + per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; @@ -760,14 +760,14 @@ reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -776,14 +776,14 @@ ti,index-starts-at-one; }; - dpll_per_x2_ck: dpll_per_x2_ck { + dpll_per_x2_ck: dpll_per_x2_ck@150 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; clocks = <&dpll_per_ck>; reg = <0x0150>; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck { + dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -794,7 +794,7 @@ ti,invert-autoidle-bit; }; - dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck { + dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_per_x2_ck>; @@ -802,7 +802,7 @@ reg = <0x0154>; }; - dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck { + dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -817,7 +817,7 @@ clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>; }; - dpll_per_m4x2_ck: dpll_per_m4x2_ck { + dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -828,7 +828,7 @@ ti,invert-autoidle-bit; }; - dpll_per_m5x2_ck: dpll_per_m5x2_ck { + dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -839,7 +839,7 @@ ti,invert-autoidle-bit; }; - dpll_per_m6x2_ck: dpll_per_m6x2_ck { + dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -850,7 +850,7 @@ ti,invert-autoidle-bit; }; - dpll_per_m7x2_ck: dpll_per_m7x2_ck { + dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -861,14 +861,14 @@ ti,invert-autoidle-bit; }; - dpll_usb_ck: dpll_usb_ck { + dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { + dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; clocks = <&dpll_usb_ck>; @@ -879,7 +879,7 @@ ti,invert-autoidle-bit; }; - dpll_usb_m2_ck: dpll_usb_m2_ck { + dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; @@ -890,7 +890,7 @@ ti,invert-autoidle-bit; }; - ducati_clk_mux_ck: ducati_clk_mux_ck { + ducati_clk_mux_ck: ducati_clk_mux_ck@100 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; @@ -921,7 +921,7 @@ clock-div = <8>; }; - func_48m_fclk: func_48m_fclk { + func_48m_fclk: func_48m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m2x2_ck>; @@ -937,7 +937,7 @@ clock-div = <4>; }; - func_64m_fclk: func_64m_fclk { + func_64m_fclk: func_64m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m4x2_ck>; @@ -945,7 +945,7 @@ ti,dividers = <2>, <4>; }; - func_96m_fclk: func_96m_fclk { + func_96m_fclk: func_96m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m2x2_ck>; @@ -953,7 +953,7 @@ ti,dividers = <2>, <4>; }; - init_60m_fclk: init_60m_fclk { + init_60m_fclk: init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_m2_ck>; @@ -961,7 +961,7 @@ ti,dividers = <1>, <8>; }; - per_abe_nc_fclk: per_abe_nc_fclk { + per_abe_nc_fclk: per_abe_nc_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2_ck>; @@ -969,7 +969,7 @@ ti,max-div = <2>; }; - aes1_fck: aes1_fck { + aes1_fck: aes1_fck@15a0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3_div_ck>; @@ -977,7 +977,7 @@ reg = <0x15a0>; }; - aes2_fck: aes2_fck { + aes2_fck: aes2_fck@15a8 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3_div_ck>; @@ -985,7 +985,7 @@ reg = <0x15a8>; }; - dss_sys_clk: dss_sys_clk { + dss_sys_clk: dss_sys_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&syc_clk_div_ck>; @@ -993,7 +993,7 @@ reg = <0x1120>; }; - dss_tv_clk: dss_tv_clk { + dss_tv_clk: dss_tv_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&extalt_clkin_ck>; @@ -1001,7 +1001,7 @@ reg = <0x1120>; }; - dss_dss_clk: dss_dss_clk { + dss_dss_clk: dss_dss_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_m5x2_ck>; @@ -1010,7 +1010,7 @@ ti,set-rate-parent; }; - dss_48mhz_clk: dss_48mhz_clk { + dss_48mhz_clk: dss_48mhz_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48mc_fclk>; @@ -1018,7 +1018,7 @@ reg = <0x1120>; }; - fdif_fck: fdif_fck { + fdif_fck: fdif_fck@1028 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m4x2_ck>; @@ -1028,7 +1028,7 @@ ti,index-power-of-two; }; - gpio2_dbclk: gpio2_dbclk { + gpio2_dbclk: gpio2_dbclk@1460 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1036,7 +1036,7 @@ reg = <0x1460>; }; - gpio3_dbclk: gpio3_dbclk { + gpio3_dbclk: gpio3_dbclk@1468 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1044,7 +1044,7 @@ reg = <0x1468>; }; - gpio4_dbclk: gpio4_dbclk { + gpio4_dbclk: gpio4_dbclk@1470 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1052,7 +1052,7 @@ reg = <0x1470>; }; - gpio5_dbclk: gpio5_dbclk { + gpio5_dbclk: gpio5_dbclk@1478 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1060,7 +1060,7 @@ reg = <0x1478>; }; - gpio6_dbclk: gpio6_dbclk { + gpio6_dbclk: gpio6_dbclk@1480 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1068,7 +1068,7 @@ reg = <0x1480>; }; - sgx_clk_mux: sgx_clk_mux { + sgx_clk_mux: sgx_clk_mux@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>; @@ -1076,7 +1076,7 @@ reg = <0x1220>; }; - hsi_fck: hsi_fck { + hsi_fck: hsi_fck@1338 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m2x2_ck>; @@ -1086,7 +1086,7 @@ ti,index-power-of-two; }; - iss_ctrlclk: iss_ctrlclk { + iss_ctrlclk: iss_ctrlclk@1020 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_96m_fclk>; @@ -1094,7 +1094,7 @@ reg = <0x1020>; }; - mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck { + mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck@14e0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>; @@ -1102,7 +1102,7 @@ reg = <0x14e0>; }; - per_mcbsp4_gfclk: per_mcbsp4_gfclk { + per_mcbsp4_gfclk: per_mcbsp4_gfclk@14e0 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>; @@ -1110,7 +1110,7 @@ reg = <0x14e0>; }; - hsmmc1_fclk: hsmmc1_fclk { + hsmmc1_fclk: hsmmc1_fclk@1328 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_64m_fclk>, <&func_96m_fclk>; @@ -1118,7 +1118,7 @@ reg = <0x1328>; }; - hsmmc2_fclk: hsmmc2_fclk { + hsmmc2_fclk: hsmmc2_fclk@1330 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_64m_fclk>, <&func_96m_fclk>; @@ -1126,7 +1126,7 @@ reg = <0x1330>; }; - ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m { + ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m@13e0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48m_fclk>; @@ -1134,7 +1134,7 @@ reg = <0x13e0>; }; - sha2md5_fck: sha2md5_fck { + sha2md5_fck: sha2md5_fck@15c8 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3_div_ck>; @@ -1142,7 +1142,7 @@ reg = <0x15c8>; }; - slimbus2_fclk_1: slimbus2_fclk_1 { + slimbus2_fclk_1: slimbus2_fclk_1@1538 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&per_abe_24m_fclk>; @@ -1150,7 +1150,7 @@ reg = <0x1538>; }; - slimbus2_fclk_0: slimbus2_fclk_0 { + slimbus2_fclk_0: slimbus2_fclk_0@1538 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_24mc_fclk>; @@ -1158,7 +1158,7 @@ reg = <0x1538>; }; - slimbus2_slimbus_clk: slimbus2_slimbus_clk { + slimbus2_slimbus_clk: slimbus2_slimbus_clk@1538 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&pad_slimbus_core_clks_ck>; @@ -1166,7 +1166,7 @@ reg = <0x1538>; }; - smartreflex_core_fck: smartreflex_core_fck { + smartreflex_core_fck: smartreflex_core_fck@638 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_wkup_clk_mux_ck>; @@ -1174,7 +1174,7 @@ reg = <0x0638>; }; - smartreflex_iva_fck: smartreflex_iva_fck { + smartreflex_iva_fck: smartreflex_iva_fck@630 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_wkup_clk_mux_ck>; @@ -1182,7 +1182,7 @@ reg = <0x0630>; }; - smartreflex_mpu_fck: smartreflex_mpu_fck { + smartreflex_mpu_fck: smartreflex_mpu_fck@628 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_wkup_clk_mux_ck>; @@ -1190,7 +1190,7 @@ reg = <0x0628>; }; - cm2_dm10_mux: cm2_dm10_mux { + cm2_dm10_mux: cm2_dm10_mux@1428 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -1198,7 +1198,7 @@ reg = <0x1428>; }; - cm2_dm11_mux: cm2_dm11_mux { + cm2_dm11_mux: cm2_dm11_mux@1430 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -1206,7 +1206,7 @@ reg = <0x1430>; }; - cm2_dm2_mux: cm2_dm2_mux { + cm2_dm2_mux: cm2_dm2_mux@1438 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -1214,7 +1214,7 @@ reg = <0x1438>; }; - cm2_dm3_mux: cm2_dm3_mux { + cm2_dm3_mux: cm2_dm3_mux@1440 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -1222,7 +1222,7 @@ reg = <0x1440>; }; - cm2_dm4_mux: cm2_dm4_mux { + cm2_dm4_mux: cm2_dm4_mux@1448 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -1230,7 +1230,7 @@ reg = <0x1448>; }; - cm2_dm9_mux: cm2_dm9_mux { + cm2_dm9_mux: cm2_dm9_mux@1450 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; @@ -1238,7 +1238,7 @@ reg = <0x1450>; }; - usb_host_fs_fck: usb_host_fs_fck { + usb_host_fs_fck: usb_host_fs_fck@13d0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48mc_fclk>; @@ -1246,7 +1246,7 @@ reg = <0x13d0>; }; - utmi_p1_gfclk: utmi_p1_gfclk { + utmi_p1_gfclk: utmi_p1_gfclk@1358 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>; @@ -1254,7 +1254,7 @@ reg = <0x1358>; }; - usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk { + usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&utmi_p1_gfclk>; @@ -1262,7 +1262,7 @@ reg = <0x1358>; }; - utmi_p2_gfclk: utmi_p2_gfclk { + utmi_p2_gfclk: utmi_p2_gfclk@1358 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>; @@ -1270,7 +1270,7 @@ reg = <0x1358>; }; - usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk { + usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&utmi_p2_gfclk>; @@ -1278,7 +1278,7 @@ reg = <0x1358>; }; - usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk { + usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1286,7 +1286,7 @@ reg = <0x1358>; }; - usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk { + usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_m2_ck>; @@ -1294,7 +1294,7 @@ reg = <0x1358>; }; - usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk { + usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1302,7 +1302,7 @@ reg = <0x1358>; }; - usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk { + usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1310,7 +1310,7 @@ reg = <0x1358>; }; - usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk { + usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_m2_ck>; @@ -1318,7 +1318,7 @@ reg = <0x1358>; }; - usb_host_hs_func48mclk: usb_host_hs_func48mclk { + usb_host_hs_func48mclk: usb_host_hs_func48mclk@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48mc_fclk>; @@ -1326,7 +1326,7 @@ reg = <0x1358>; }; - usb_host_hs_fck: usb_host_hs_fck { + usb_host_hs_fck: usb_host_hs_fck@1358 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1334,7 +1334,7 @@ reg = <0x1358>; }; - otg_60m_gfclk: otg_60m_gfclk { + otg_60m_gfclk: otg_60m_gfclk@1360 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>; @@ -1342,7 +1342,7 @@ reg = <0x1360>; }; - usb_otg_hs_xclk: usb_otg_hs_xclk { + usb_otg_hs_xclk: usb_otg_hs_xclk@1360 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&otg_60m_gfclk>; @@ -1350,7 +1350,7 @@ reg = <0x1360>; }; - usb_otg_hs_ick: usb_otg_hs_ick { + usb_otg_hs_ick: usb_otg_hs_ick@1360 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3_div_ck>; @@ -1358,7 +1358,7 @@ reg = <0x1360>; }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k { + usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1366,7 +1366,7 @@ reg = <0x0640>; }; - usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk { + usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@1368 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1374,7 +1374,7 @@ reg = <0x1368>; }; - usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk { + usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@1368 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1382,7 +1382,7 @@ reg = <0x1368>; }; - usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk { + usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@1368 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&init_60m_fclk>; @@ -1390,7 +1390,7 @@ reg = <0x1368>; }; - usb_tll_hs_ick: usb_tll_hs_ick { + usb_tll_hs_ick: usb_tll_hs_ick@1368 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l4_div_ck>; @@ -1407,7 +1407,7 @@ }; &scrm_clocks { - auxclk0_src_gate_ck: auxclk0_src_gate_ck { + auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1415,7 +1415,7 @@ reg = <0x0310>; }; - auxclk0_src_mux_ck: auxclk0_src_mux_ck { + auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1429,7 +1429,7 @@ clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; - auxclk0_ck: auxclk0_ck { + auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk0_src_ck>; @@ -1438,7 +1438,7 @@ reg = <0x0310>; }; - auxclk1_src_gate_ck: auxclk1_src_gate_ck { + auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1446,7 +1446,7 @@ reg = <0x0314>; }; - auxclk1_src_mux_ck: auxclk1_src_mux_ck { + auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1460,7 +1460,7 @@ clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; - auxclk1_ck: auxclk1_ck { + auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk1_src_ck>; @@ -1469,7 +1469,7 @@ reg = <0x0314>; }; - auxclk2_src_gate_ck: auxclk2_src_gate_ck { + auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1477,7 +1477,7 @@ reg = <0x0318>; }; - auxclk2_src_mux_ck: auxclk2_src_mux_ck { + auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1491,7 +1491,7 @@ clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; - auxclk2_ck: auxclk2_ck { + auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk2_src_ck>; @@ -1500,7 +1500,7 @@ reg = <0x0318>; }; - auxclk3_src_gate_ck: auxclk3_src_gate_ck { + auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1508,7 +1508,7 @@ reg = <0x031c>; }; - auxclk3_src_mux_ck: auxclk3_src_mux_ck { + auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1522,7 +1522,7 @@ clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; - auxclk3_ck: auxclk3_ck { + auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk3_src_ck>; @@ -1531,7 +1531,7 @@ reg = <0x031c>; }; - auxclk4_src_gate_ck: auxclk4_src_gate_ck { + auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1539,7 +1539,7 @@ reg = <0x0320>; }; - auxclk4_src_mux_ck: auxclk4_src_mux_ck { + auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1553,7 +1553,7 @@ clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; - auxclk4_ck: auxclk4_ck { + auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk4_src_ck>; @@ -1562,7 +1562,7 @@ reg = <0x0320>; }; - auxclk5_src_gate_ck: auxclk5_src_gate_ck { + auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1570,7 +1570,7 @@ reg = <0x0324>; }; - auxclk5_src_mux_ck: auxclk5_src_mux_ck { + auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1584,7 +1584,7 @@ clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>; }; - auxclk5_ck: auxclk5_ck { + auxclk5_ck: auxclk5_ck@324 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk5_src_ck>; @@ -1593,7 +1593,7 @@ reg = <0x0324>; }; - auxclkreq0_ck: auxclkreq0_ck { + auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; @@ -1601,7 +1601,7 @@ reg = <0x0210>; }; - auxclkreq1_ck: auxclkreq1_ck { + auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; @@ -1609,7 +1609,7 @@ reg = <0x0214>; }; - auxclkreq2_ck: auxclkreq2_ck { + auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; @@ -1617,7 +1617,7 @@ reg = <0x0218>; }; - auxclkreq3_ck: auxclkreq3_ck { + auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; @@ -1625,7 +1625,7 @@ reg = <0x021c>; }; - auxclkreq4_ck: auxclkreq4_ck { + auxclkreq4_ck: auxclkreq4_ck@220 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; @@ -1633,7 +1633,7 @@ reg = <0x0220>; }; - auxclkreq5_ck: auxclkreq5_ck { + auxclkreq5_ck: auxclkreq5_ck@224 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 914bf4c47404..dc759a3028b7 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -391,11 +391,21 @@ ti,backup-battery-charge-high-current; }; + gpadc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 0 + 16 0 + 17 0>; + #io-channel-cells = <1>; + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <10>; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; interrupts = <14 IRQ_TYPE_NONE>; - interrupt-name = "short-irq"; + interrupt-names = "short-irq"; ti,ldo6-vibrator; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 4d87d9c6c86d..93fdfa96776e 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -434,7 +434,7 @@ compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; interrupts = <14 IRQ_TYPE_NONE>; - interrupt-name = "short-irq"; + interrupt-names = "short-irq"; ti,ldo6-vibrator; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 120b6b80cd39..84c10195e79b 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -187,7 +187,7 @@ #size-cells = <1>; ranges = <0 0x5a0 0xec>; - pbias_regulator: pbias_regulator { + pbias_regulator: pbias_regulator@60 { compatible = "ti,pbias-omap5", "ti,pbias-omap"; reg = <0x60 0x4>; syscon = <&omap5_padconf_global>; @@ -398,6 +398,10 @@ ti,hwmods = "gpmc"; clocks = <&l3_iclk_div>; clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 83b425fb3ac2..4899c2359d0a 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -14,7 +14,7 @@ clock-frequency = <12000000>; }; - pad_clks_ck: pad_clks_ck { + pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&pad_clks_src_ck>; @@ -34,7 +34,7 @@ clock-frequency = <12000000>; }; - slimbus_clk: slimbus_clk { + slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&slimbus_src_clk>; @@ -102,7 +102,7 @@ clock-frequency = <60000000>; }; - dpll_abe_ck: dpll_abe_ck { + dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; @@ -115,7 +115,7 @@ clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck { + dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -132,7 +132,7 @@ clock-div = <8>; }; - abe_clk: abe_clk { + abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_m2x2_ck>; @@ -141,7 +141,7 @@ ti,index-power-of-two; }; - abe_iclk: abe_iclk { + abe_iclk: abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&aess_fclk>; @@ -158,7 +158,7 @@ clock-div = <16>; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck { + dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; @@ -167,7 +167,7 @@ ti,index-starts-at-one; }; - dpll_core_byp_mux: dpll_core_byp_mux { + dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; @@ -175,7 +175,7 @@ reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; clocks = <&sys_clkin>, <&dpll_core_byp_mux>; @@ -188,7 +188,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_h21x2_ck: dpll_core_h21x2_ck { + dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -213,7 +213,7 @@ clock-div = <2>; }; - dpll_core_h11x2_ck: dpll_core_h11x2_ck { + dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -222,7 +222,7 @@ ti,index-starts-at-one; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck { + dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -231,7 +231,7 @@ ti,index-starts-at-one; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck { + dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -240,7 +240,7 @@ ti,index-starts-at-one; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck { + dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -249,7 +249,7 @@ ti,index-starts-at-one; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck { + dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -258,7 +258,7 @@ ti,index-starts-at-one; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck { + dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -267,7 +267,7 @@ ti,index-starts-at-one; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck { + dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -276,7 +276,7 @@ ti,index-starts-at-one; }; - dpll_core_m2_ck: dpll_core_m2_ck { + dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; @@ -285,7 +285,7 @@ ti,index-starts-at-one; }; - dpll_core_m3x2_ck: dpll_core_m3x2_ck { + dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -302,7 +302,7 @@ clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux { + dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; @@ -310,7 +310,7 @@ reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck { + dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; @@ -323,7 +323,7 @@ clocks = <&dpll_iva_ck>; }; - dpll_iva_h11x2_ck: dpll_iva_h11x2_ck { + dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; @@ -332,7 +332,7 @@ ti,index-starts-at-one; }; - dpll_iva_h12x2_ck: dpll_iva_h12x2_ck { + dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; @@ -349,14 +349,14 @@ clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -381,7 +381,7 @@ clock-div = <3>; }; - l3_iclk_div: l3_iclk_div { + l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; ti,max-div = <2>; @@ -399,7 +399,7 @@ clock-div = <1>; }; - l4_root_clk_div: l4_root_clk_div { + l4_root_clk_div: l4_root_clk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; ti,max-div = <2>; @@ -409,7 +409,7 @@ ti,index-power-of-two; }; - slimbus1_slimbus_clk: slimbus1_slimbus_clk { + slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&slimbus_clk>; @@ -417,7 +417,7 @@ reg = <0x0560>; }; - aess_fclk: aess_fclk { + aess_fclk: aess_fclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&abe_clk>; @@ -426,7 +426,7 @@ reg = <0x0528>; }; - dmic_sync_mux_ck: dmic_sync_mux_ck { + dmic_sync_mux_ck: dmic_sync_mux_ck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; @@ -434,7 +434,7 @@ reg = <0x0538>; }; - dmic_gfclk: dmic_gfclk { + dmic_gfclk: dmic_gfclk@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -442,7 +442,7 @@ reg = <0x0538>; }; - mcasp_sync_mux_ck: mcasp_sync_mux_ck { + mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; @@ -450,7 +450,7 @@ reg = <0x0540>; }; - mcasp_gfclk: mcasp_gfclk { + mcasp_gfclk: mcasp_gfclk@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -458,7 +458,7 @@ reg = <0x0540>; }; - mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck { + mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@548 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; @@ -466,7 +466,7 @@ reg = <0x0548>; }; - mcbsp1_gfclk: mcbsp1_gfclk { + mcbsp1_gfclk: mcbsp1_gfclk@548 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -474,7 +474,7 @@ reg = <0x0548>; }; - mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck { + mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; @@ -482,7 +482,7 @@ reg = <0x0550>; }; - mcbsp2_gfclk: mcbsp2_gfclk { + mcbsp2_gfclk: mcbsp2_gfclk@550 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -490,7 +490,7 @@ reg = <0x0550>; }; - mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck { + mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@558 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; @@ -498,7 +498,7 @@ reg = <0x0558>; }; - mcbsp3_gfclk: mcbsp3_gfclk { + mcbsp3_gfclk: mcbsp3_gfclk@558 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; @@ -506,7 +506,7 @@ reg = <0x0558>; }; - timer5_gfclk_mux: timer5_gfclk_mux { + timer5_gfclk_mux: timer5_gfclk_mux@568 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; @@ -514,7 +514,7 @@ reg = <0x0568>; }; - timer6_gfclk_mux: timer6_gfclk_mux { + timer6_gfclk_mux: timer6_gfclk_mux@570 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; @@ -522,7 +522,7 @@ reg = <0x0570>; }; - timer7_gfclk_mux: timer7_gfclk_mux { + timer7_gfclk_mux: timer7_gfclk_mux@578 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; @@ -530,7 +530,7 @@ reg = <0x0578>; }; - timer8_gfclk_mux: timer8_gfclk_mux { + timer8_gfclk_mux: timer8_gfclk_mux@580 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; @@ -545,7 +545,7 @@ }; }; &prm_clocks { - sys_clkin: sys_clkin { + sys_clkin: sys_clkin@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; @@ -553,14 +553,14 @@ ti,index-starts-at-one; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux { + abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x0108>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux { + abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -583,7 +583,7 @@ clock-div = <1>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux { + wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&abe_lp_clk_div>; @@ -598,7 +598,7 @@ clock-div = <1>; }; - gpio1_dbclk: gpio1_dbclk { + gpio1_dbclk: gpio1_dbclk@1938 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -606,7 +606,7 @@ reg = <0x1938>; }; - timer1_gfclk_mux: timer1_gfclk_mux { + timer1_gfclk_mux: timer1_gfclk_mux@1940 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -616,7 +616,7 @@ }; &cm_core_clocks { - dpll_per_byp_mux: dpll_per_byp_mux { + dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; @@ -624,7 +624,7 @@ reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin>, <&dpll_per_byp_mux>; @@ -637,7 +637,7 @@ clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck { + dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -646,7 +646,7 @@ ti,index-starts-at-one; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck { + dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -655,7 +655,7 @@ ti,index-starts-at-one; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck { + dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -664,7 +664,7 @@ ti,index-starts-at-one; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -673,7 +673,7 @@ ti,index-starts-at-one; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck { + dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -682,7 +682,7 @@ ti,index-starts-at-one; }; - dpll_per_m3x2_ck: dpll_per_m3x2_ck { + dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; @@ -691,7 +691,7 @@ ti,index-starts-at-one; }; - dpll_unipro1_ck: dpll_unipro1_ck { + dpll_unipro1_ck: dpll_unipro1_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin>, <&sys_clkin>; @@ -706,7 +706,7 @@ clock-div = <1>; }; - dpll_unipro1_m2_ck: dpll_unipro1_m2_ck { + dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_unipro1_ck>; @@ -715,7 +715,7 @@ ti,index-starts-at-one; }; - dpll_unipro2_ck: dpll_unipro2_ck { + dpll_unipro2_ck: dpll_unipro2_ck@1c0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin>, <&sys_clkin>; @@ -730,7 +730,7 @@ clock-div = <1>; }; - dpll_unipro2_m2_ck: dpll_unipro2_m2_ck { + dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_unipro2_ck>; @@ -739,7 +739,7 @@ ti,index-starts-at-one; }; - dpll_usb_byp_mux: dpll_usb_byp_mux { + dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; @@ -747,7 +747,7 @@ reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck { + dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; @@ -762,7 +762,7 @@ clock-div = <1>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck { + dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; @@ -811,7 +811,7 @@ clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk { + l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_usb_m2_ck>; @@ -819,7 +819,7 @@ ti,dividers = <1>, <8>; }; - dss_32khz_clk: dss_32khz_clk { + dss_32khz_clk: dss_32khz_clk@1420 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -827,7 +827,7 @@ reg = <0x1420>; }; - dss_48mhz_clk: dss_48mhz_clk { + dss_48mhz_clk: dss_48mhz_clk@1420 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_48m_fclk>; @@ -835,7 +835,7 @@ reg = <0x1420>; }; - dss_dss_clk: dss_dss_clk { + dss_dss_clk: dss_dss_clk@1420 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_h12x2_ck>; @@ -844,7 +844,7 @@ ti,set-rate-parent; }; - dss_sys_clk: dss_sys_clk { + dss_sys_clk: dss_sys_clk@1420 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dss_syc_gfclk_div>; @@ -852,7 +852,7 @@ reg = <0x1420>; }; - gpio2_dbclk: gpio2_dbclk { + gpio2_dbclk: gpio2_dbclk@1060 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -860,7 +860,7 @@ reg = <0x1060>; }; - gpio3_dbclk: gpio3_dbclk { + gpio3_dbclk: gpio3_dbclk@1068 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -868,7 +868,7 @@ reg = <0x1068>; }; - gpio4_dbclk: gpio4_dbclk { + gpio4_dbclk: gpio4_dbclk@1070 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -876,7 +876,7 @@ reg = <0x1070>; }; - gpio5_dbclk: gpio5_dbclk { + gpio5_dbclk: gpio5_dbclk@1078 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -884,7 +884,7 @@ reg = <0x1078>; }; - gpio6_dbclk: gpio6_dbclk { + gpio6_dbclk: gpio6_dbclk@1080 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -892,7 +892,7 @@ reg = <0x1080>; }; - gpio7_dbclk: gpio7_dbclk { + gpio7_dbclk: gpio7_dbclk@1110 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -900,7 +900,7 @@ reg = <0x1110>; }; - gpio8_dbclk: gpio8_dbclk { + gpio8_dbclk: gpio8_dbclk@1118 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -908,7 +908,7 @@ reg = <0x1118>; }; - iss_ctrlclk: iss_ctrlclk { + iss_ctrlclk: iss_ctrlclk@1320 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&func_96m_fclk>; @@ -916,7 +916,7 @@ reg = <0x1320>; }; - lli_txphy_clk: lli_txphy_clk { + lli_txphy_clk: lli_txphy_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_unipro1_clkdcoldo>; @@ -924,7 +924,7 @@ reg = <0x0f20>; }; - lli_txphy_ls_clk: lli_txphy_ls_clk { + lli_txphy_ls_clk: lli_txphy_ls_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_unipro1_m2_ck>; @@ -932,7 +932,7 @@ reg = <0x0f20>; }; - mmc1_32khz_clk: mmc1_32khz_clk { + mmc1_32khz_clk: mmc1_32khz_clk@1628 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -940,7 +940,7 @@ reg = <0x1628>; }; - sata_ref_clk: sata_ref_clk { + sata_ref_clk: sata_ref_clk@1688 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_clkin>; @@ -948,7 +948,7 @@ reg = <0x1688>; }; - usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk { + usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_m2_ck>; @@ -956,7 +956,7 @@ reg = <0x1658>; }; - usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk { + usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_m2_ck>; @@ -964,7 +964,7 @@ reg = <0x1658>; }; - usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk { + usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_m2_ck>; @@ -972,7 +972,7 @@ reg = <0x1658>; }; - usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk { + usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -980,7 +980,7 @@ reg = <0x1658>; }; - usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk { + usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -988,7 +988,7 @@ reg = <0x1658>; }; - usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk { + usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -996,7 +996,7 @@ reg = <0x1658>; }; - utmi_p1_gfclk: utmi_p1_gfclk { + utmi_p1_gfclk: utmi_p1_gfclk@1658 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>; @@ -1004,7 +1004,7 @@ reg = <0x1658>; }; - usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk { + usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&utmi_p1_gfclk>; @@ -1012,7 +1012,7 @@ reg = <0x1658>; }; - utmi_p2_gfclk: utmi_p2_gfclk { + utmi_p2_gfclk: utmi_p2_gfclk@1658 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>; @@ -1020,7 +1020,7 @@ reg = <0x1658>; }; - usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk { + usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&utmi_p2_gfclk>; @@ -1028,7 +1028,7 @@ reg = <0x1658>; }; - usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk { + usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@1658 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -1036,7 +1036,7 @@ reg = <0x1658>; }; - usb_otg_ss_refclk960m: usb_otg_ss_refclk960m { + usb_otg_ss_refclk960m: usb_otg_ss_refclk960m@16f0 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_usb_clkdcoldo>; @@ -1044,7 +1044,7 @@ reg = <0x16f0>; }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k { + usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&sys_32k_ck>; @@ -1052,7 +1052,7 @@ reg = <0x0640>; }; - usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk { + usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@1668 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -1060,7 +1060,7 @@ reg = <0x1668>; }; - usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk { + usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@1668 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -1068,7 +1068,7 @@ reg = <0x1668>; }; - usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk { + usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@1668 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&l3init_60m_fclk>; @@ -1076,7 +1076,7 @@ reg = <0x1668>; }; - fdif_fclk: fdif_fclk { + fdif_fclk: fdif_fclk@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_h11x2_ck>; @@ -1085,7 +1085,7 @@ reg = <0x1328>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux { + gpu_core_gclk_mux: gpu_core_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; @@ -1093,7 +1093,7 @@ reg = <0x1520>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux { + gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; @@ -1101,7 +1101,7 @@ reg = <0x1520>; }; - hsi_fclk: hsi_fclk { + hsi_fclk: hsi_fclk@1638 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_m2x2_ck>; @@ -1110,7 +1110,7 @@ reg = <0x1638>; }; - mmc1_fclk_mux: mmc1_fclk_mux { + mmc1_fclk_mux: mmc1_fclk_mux@1628 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; @@ -1118,7 +1118,7 @@ reg = <0x1628>; }; - mmc1_fclk: mmc1_fclk { + mmc1_fclk: mmc1_fclk@1628 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc1_fclk_mux>; @@ -1127,7 +1127,7 @@ reg = <0x1628>; }; - mmc2_fclk_mux: mmc2_fclk_mux { + mmc2_fclk_mux: mmc2_fclk_mux@1630 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; @@ -1135,7 +1135,7 @@ reg = <0x1630>; }; - mmc2_fclk: mmc2_fclk { + mmc2_fclk: mmc2_fclk@1630 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&mmc2_fclk_mux>; @@ -1144,7 +1144,7 @@ reg = <0x1630>; }; - timer10_gfclk_mux: timer10_gfclk_mux { + timer10_gfclk_mux: timer10_gfclk_mux@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -1152,7 +1152,7 @@ reg = <0x1028>; }; - timer11_gfclk_mux: timer11_gfclk_mux { + timer11_gfclk_mux: timer11_gfclk_mux@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -1160,7 +1160,7 @@ reg = <0x1030>; }; - timer2_gfclk_mux: timer2_gfclk_mux { + timer2_gfclk_mux: timer2_gfclk_mux@1038 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -1168,7 +1168,7 @@ reg = <0x1038>; }; - timer3_gfclk_mux: timer3_gfclk_mux { + timer3_gfclk_mux: timer3_gfclk_mux@1040 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -1176,7 +1176,7 @@ reg = <0x1040>; }; - timer4_gfclk_mux: timer4_gfclk_mux { + timer4_gfclk_mux: timer4_gfclk_mux@1048 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -1184,7 +1184,7 @@ reg = <0x1048>; }; - timer9_gfclk_mux: timer9_gfclk_mux { + timer9_gfclk_mux: timer9_gfclk_mux@1050 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&sys_clkin>, <&sys_32k_ck>; @@ -1201,7 +1201,7 @@ }; &scrm_clocks { - auxclk0_src_gate_ck: auxclk0_src_gate_ck { + auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1209,7 +1209,7 @@ reg = <0x0310>; }; - auxclk0_src_mux_ck: auxclk0_src_mux_ck { + auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1223,7 +1223,7 @@ clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; - auxclk0_ck: auxclk0_ck { + auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk0_src_ck>; @@ -1232,7 +1232,7 @@ reg = <0x0310>; }; - auxclk1_src_gate_ck: auxclk1_src_gate_ck { + auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1240,7 +1240,7 @@ reg = <0x0314>; }; - auxclk1_src_mux_ck: auxclk1_src_mux_ck { + auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1254,7 +1254,7 @@ clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; - auxclk1_ck: auxclk1_ck { + auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk1_src_ck>; @@ -1263,7 +1263,7 @@ reg = <0x0314>; }; - auxclk2_src_gate_ck: auxclk2_src_gate_ck { + auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1271,7 +1271,7 @@ reg = <0x0318>; }; - auxclk2_src_mux_ck: auxclk2_src_mux_ck { + auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1285,7 +1285,7 @@ clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; - auxclk2_ck: auxclk2_ck { + auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk2_src_ck>; @@ -1294,7 +1294,7 @@ reg = <0x0318>; }; - auxclk3_src_gate_ck: auxclk3_src_gate_ck { + auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1302,7 +1302,7 @@ reg = <0x031c>; }; - auxclk3_src_mux_ck: auxclk3_src_mux_ck { + auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1316,7 +1316,7 @@ clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; - auxclk3_ck: auxclk3_ck { + auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk3_src_ck>; @@ -1325,7 +1325,7 @@ reg = <0x031c>; }; - auxclk4_src_gate_ck: auxclk4_src_gate_ck { + auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; clocks = <&dpll_core_m3x2_ck>; @@ -1333,7 +1333,7 @@ reg = <0x0320>; }; - auxclk4_src_mux_ck: auxclk4_src_mux_ck { + auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; @@ -1347,7 +1347,7 @@ clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; - auxclk4_ck: auxclk4_ck { + auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&auxclk4_src_ck>; @@ -1356,7 +1356,7 @@ reg = <0x0320>; }; - auxclkreq0_ck: auxclkreq0_ck { + auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; @@ -1364,7 +1364,7 @@ reg = <0x0210>; }; - auxclkreq1_ck: auxclkreq1_ck { + auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; @@ -1372,7 +1372,7 @@ reg = <0x0214>; }; - auxclkreq2_ck: auxclkreq2_ck { + auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; @@ -1380,7 +1380,7 @@ reg = <0x0218>; }; - auxclkreq3_ck: auxclkreq3_ck { + auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts new file mode 100644 index 000000000000..1a672b098d0b --- /dev/null +++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts @@ -0,0 +1,127 @@ +/* + * Device Tree file for Buffalo/Revogear Kurobox Pro + * + * Copyright (C) 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c + * Copyright (C) Ronen Shitrit <rshitrit@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo/Revogear Kurobox Pro"; + compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>, + <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>; + }; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; +}; + +&devbus_cs0 { + status = "okay"; + compatible = "marvell,orion-nand"; + reg = <MBUS_ID(0x01, 0x1e) 0 0x400>; + cle = <0>; + ale = <1>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uImage@0 { /* 4 MB */ + reg = <0 0x400000>; + read-only; + }; + + rootfs@400000 { /* 64 MB */ + reg = <0x400000 0x4000000>; + read-only; + }; + + extra@4400000 { /* 188 MB */ + reg = <0x4400000 0xBC00000>; + read-only; + }; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + +&sata { + nr-ports = <2>; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi new file mode 100644 index 000000000000..ce13705c38d4 --- /dev/null +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -0,0 +1,336 @@ +/* + * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "oxsemi,ox810se"; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + clocks = <&armclk>; + }; + }; + + memory { + /* Max 256MB @ 0x48000000 */ + reg = <0x48000000 0x10000000>; + }; + + clocks { + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + rpsclk: rpsclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc>; + }; + + pll400: pll400 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <733333333>; + }; + + sysclk: sysclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll400>; + }; + + armclk: armclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll400>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc>; + + apb-bridge@44000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x44000000 0x1000000>; + + pinctrl: pinctrl { + compatible = "oxsemi,ox810se-pinctrl"; + + /* Regmap for sys registers */ + oxsemi,sys-ctrl = <&sys>; + + pinctrl_uart0: uart0 { + uart0a { + pins = "gpio31"; + function = "fct3"; + }; + uart0b { + pins = "gpio32"; + function = "fct3"; + }; + }; + + pinctrl_uart0_modem: uart0_modem { + uart0c { + pins = "gpio27"; + function = "fct3"; + }; + uart0d { + pins = "gpio28"; + function = "fct3"; + }; + uart0e { + pins = "gpio29"; + function = "fct3"; + }; + uart0f { + pins = "gpio30"; + function = "fct3"; + }; + uart0g { + pins = "gpio33"; + function = "fct3"; + }; + uart0h { + pins = "gpio34"; + function = "fct3"; + }; + }; + + pinctrl_uart1: uart1 { + uart1a { + pins = "gpio20"; + function = "fct3"; + }; + uart1b { + pins = "gpio22"; + function = "fct3"; + }; + }; + + pinctrl_uart1_modem: uart1_modem { + uart1c { + pins = "gpio8"; + function = "fct3"; + }; + uart1d { + pins = "gpio9"; + function = "fct3"; + }; + uart1e { + pins = "gpio23"; + function = "fct3"; + }; + uart1f { + pins = "gpio24"; + function = "fct3"; + }; + uart1g { + pins = "gpio25"; + function = "fct3"; + }; + uart1h { + pins = "gpio26"; + function = "fct3"; + }; + }; + + pinctrl_uart2: uart2 { + uart2a { + pins = "gpio6"; + function = "fct3"; + }; + uart2b { + pins = "gpio7"; + function = "fct3"; + }; + }; + + pinctrl_uart2_modem: uart2_modem { + uart2c { + pins = "gpio0"; + function = "fct3"; + }; + uart2d { + pins = "gpio1"; + function = "fct3"; + }; + uart2e { + pins = "gpio2"; + function = "fct3"; + }; + uart2f { + pins = "gpio3"; + function = "fct3"; + }; + uart2g { + pins = "gpio4"; + function = "fct3"; + }; + uart2h { + pins = "gpio5"; + function = "fct3"; + }; + }; + }; + + gpio0: gpio@000000 { + compatible = "oxsemi,ox810se-gpio"; + reg = <0x000000 0x100000>; + interrupts = <21>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <32>; + oxsemi,gpio-bank = <0>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + + gpio1: gpio@100000 { + compatible = "oxsemi,ox810se-gpio"; + reg = <0x100000 0x100000>; + interrupts = <22>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <3>; + oxsemi,gpio-bank = <1>; + gpio-ranges = <&pinctrl 0 32 3>; + }; + + uart0: serial@200000 { + compatible = "ns16550a"; + reg = <0x200000 0x100000>; + clocks = <&sysclk>; + interrupts = <23>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + resets = <&reset 17>; + }; + + uart1: serial@300000 { + compatible = "ns16550a"; + reg = <0x300000 0x100000>; + clocks = <&sysclk>; + interrupts = <24>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + resets = <&reset 18>; + }; + + uart2: serial@900000 { + compatible = "ns16550a"; + reg = <0x900000 0x100000>; + clocks = <&sysclk>; + interrupts = <29>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + resets = <&reset 22>; + }; + + uart3: serial@a00000 { + compatible = "ns16550a"; + reg = <0xa00000 0x100000>; + clocks = <&sysclk>; + interrupts = <30>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + resets = <&reset 23>; + }; + }; + + apb-bridge@45000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x45000000 0x1000000>; + + sys: sys-ctrl@000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + reset: reset-controller { + compatible = "oxsemi,ox810se-reset"; + #reset-cells = <1>; + }; + + stdclk: stdclk { + compatible = "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; + }; + + rps@300000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x300000 0x100000>; + + intc: interrupt-controller@0 { + compatible = "oxsemi,ox810se-rps-irq"; + interrupt-controller; + reg = <0 0x200>; + #interrupt-cells = <1>; + valid-mask = <0xFFFFFFFF>; + clear-mask = <0>; + }; + + timer0: timer@200 { + compatible = "oxsemi,ox810se-rps-timer"; + reg = <0x200 0x40>; + clocks = <&rpsclk>; + interrupts = <4 5>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts deleted file mode 100644 index a00d7ce7802b..000000000000 --- a/arch/arm/boot/dts/phy3250.dts +++ /dev/null @@ -1,227 +0,0 @@ -/* - * PHYTEC phyCORE-LPC3250 board - * - * Copyright 2012 Roland Stigge <stigge@antcom.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "lpc32xx.dtsi" - -/ { - model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; - compatible = "phytec,phy3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - - memory { - device_type = "memory"; - reg = <0x80000000 0x4000000>; - }; - - regulators { - backlight_reg: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "backlight_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 4 0>; - enable-active-high; - regulator-boot-on; - }; - - lcd_reg: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "lcd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 0 0>; - enable-active-high; - regulator-boot-on; - }; - - sd_reg: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 5 0>; - enable-active-high; - }; - }; - - ahb { - mac: ethernet@31060000 { - phy-mode = "rmii"; - use-iram; - }; - - clcd@31040000 { - status = "okay"; - }; - - /* 64MB Flash via SLC NAND controller */ - slc: flash@20020000 { - status = "okay"; - #address-cells = <1>; - #size-cells = <1>; - - nxp,wdr-clks = <14>; - nxp,wwidth = <40000000>; - nxp,whold = <100000000>; - nxp,wsetup = <100000000>; - nxp,rdr-clks = <14>; - nxp,rwidth = <40000000>; - nxp,rhold = <66666666>; - nxp,rsetup = <100000000>; - nand-on-flash-bbt; - gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ - - mtd0@00000000 { - label = "phy3250-boot"; - reg = <0x00000000 0x00064000>; - read-only; - }; - - mtd1@00064000 { - label = "phy3250-uboot"; - reg = <0x00064000 0x00190000>; - read-only; - }; - - mtd2@001f4000 { - label = "phy3250-ubt-prms"; - reg = <0x001f4000 0x00010000>; - }; - - mtd3@00204000 { - label = "phy3250-kernel"; - reg = <0x00204000 0x00400000>; - }; - - mtd4@00604000 { - label = "phy3250-rootfs"; - reg = <0x00604000 0x039fc000>; - }; - }; - - apb { - uart5: serial@40090000 { - status = "okay"; - }; - - uart3: serial@40080000 { - status = "okay"; - }; - - i2c1: i2c@400A0000 { - clock-frequency = <100000>; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - uda1380: uda1380@18 { - compatible = "nxp,uda1380"; - reg = <0x18>; - power-gpio = <&gpio 0x59 0>; - reset-gpio = <&gpio 0x51 0>; - dac-clk = "wspll"; - }; - }; - - i2c2: i2c@400A8000 { - clock-frequency = <100000>; - }; - - ssp0: ssp@20084000 { - #address-cells = <1>; - #size-cells = <0>; - num-cs = <1>; - cs-gpios = <&gpio 3 5 0>; - - eeprom: at25@0 { - pl022,interface = <0>; - pl022,com-mode = <0>; - pl022,rx-level-trig = <1>; - pl022,tx-level-trig = <1>; - pl022,ctrl-len = <11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - - at25,byte-len = <0x8000>; - at25,addr-mode = <2>; - at25,page-size = <64>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <5000000>; - }; - }; - - sd@20098000 { - wp-gpios = <&gpio 3 0 0>; - cd-gpios = <&gpio 3 1 0>; - cd-inverted; - bus-width = <4>; - vmmc-supply = <&sd_reg>; - status = "okay"; - }; - }; - - fab { - uart2: serial@40018000 { - status = "okay"; - }; - - tsc@40048000 { - status = "okay"; - }; - - key@40050000 { - status = "okay"; - keypad,num-rows = <1>; - keypad,num-columns = <1>; - nxp,debounce-delay-ms = <3>; - nxp,scan-delay-ms = <34>; - linux,keymap = <0x00000002>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led0 { /* red */ - gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */ - default-state = "off"; - }; - - led1 { /* green */ - gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */ - linux,default-trigger = "heartbeat"; - }; - }; -}; - -/* Here, choose exactly one from: ohci, usbd */ -&ohci /* &usbd */ { - transceiver = <&isp1301>; - status = "okay"; -}; - -&i2cusb { - clock-frequency = <100000>; - - isp1301: usb-transceiver@2c { - compatible = "nxp,isp1301"; - reg = <0x2c>; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi new file mode 100644 index 000000000000..a3efb9704fcd --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi @@ -0,0 +1,52 @@ +&tlmm_pinmux { + card_detect: card-detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie-pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; + + user_leds: user-leds { + mux { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + }; + + conf { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + output-low; + }; + }; + + magneto_pins: magneto-pins { + mux { + pins = "gpio31", "gpio48"; + function = "gpio"; + bias-disable; + }; + }; +}; + +&pm8921_mpps { + mpp_leds: mpp-leds { + pinconf { + pins = "mpp7", "mpp8"; + function = "digital"; + output-low; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts new file mode 100644 index 000000000000..e01b27ea7fba --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts @@ -0,0 +1,349 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include "qcom-apq8064-arrow-db600c-pins.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Arrow Electronics, APQ8064 DB600c"; + compatible = "arrow,db600c", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi1_serial; + i2c0 = &gsbi2_i2c; + i2c1 = &gsbi3_i2c; + i2c2 = &gsbi4_i2c; + i2c3 = &gsbi7_i2c; + spi0 = &gsbi5_spi; + }; + + regulators { + compatible = "simple-bus"; + vph: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-boot-on; + }; + + /* on board fixed 3.3v supply */ + vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + }; + + soc { + rpm@108000 { + regulators { + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_s5-supply = <&vph>; + vdd_s6-supply = <&vph>; + vdd_s7-supply = <&vph>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l3_l15_l17-supply = <&vph>; + vdd_l4_l14-supply = <&vph>; + vdd_l5_l8_l16-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l9_l11-supply = <&vph>; + vdd_l10_l22-supply = <&vph>; + vdd_l21_l23_l29-supply = <&vph>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + regulator-boot-on; + regulator-always-on; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_UART_W_FC>; + serial@12450000 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi1_uart_4pins>; + }; + }; + + gsbi@12480000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@124a0000 { + /* On Low speed expansion and Sensors */ + label = "LS-I2C0"; + status = "okay"; + lis3mdl_mag@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + vdd-supply = <&vcc3v3>; + vddio-supply = <&pm8921_s4>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_pins>; + interrupt-parent = <&tlmm_pinmux>; + + st,drdy-int-pin = <2>; + interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ + <31 IRQ_TYPE_EDGE_RISING>; /* INT */ + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; + clock-frequency = <200000>; + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <64>; + }; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16380000 { + /* On High speed expansion */ + label = "HS-CAM-I2C3"; + status = "okay"; + }; + }; + + gsbi@1a200000 { + status = "okay"; + spi@1a280000 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; + }; + }; + + /* DEBUG UART */ + gsbi@16600000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + label = "LS-UART0"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + }; + + i2c@16680000 { + /* On High speed expansion */ + status = "okay"; + label = "HS-CAM-I2C2"; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>, <&mpp_leds>; + + compatible = "gpio-leds"; + + user-led0 { + label = "user0-led"; + gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user-led1 { + label = "user1-led"; + gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + user-led2 { + label = "user2-led"; + gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led3 { + label = "user3-led"; + gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + wifi-led { + label = "WiFi-led"; + gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + bt-led { + label = "BT-led"; + gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pci@1b500000 { + status = "okay"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&vcc3v3>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + + phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + target-supply = <&pm8921_lvs7>; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + dr_mode = "peripheral"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + usb@12520000 { + status = "okay"; + }; + + usb@12530000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + + /* External micro SD card */ + sdcc@12180000 { + status = "okay"; + vmmc-supply = <&pm8921_l6>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index c535b3f0e5cf..32fedfa149d0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -224,6 +224,12 @@ reg = <0x52>; pagesize = <32>; }; + + bq27541@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index b57c59d5bc00..4102a98f475b 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -39,6 +39,20 @@ }; }; + gsbi1_uart_2pins: gsbi1_uart_2pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi1"; + }; + }; + + gsbi1_uart_4pins: gsbi1_uart_4pins { + mux { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + i2c2_pins: i2c2 { mux { pins = "gpio24", "gpio25"; @@ -205,4 +219,29 @@ function = "gsbi7"; }; }; + + i2c7_pins: i2c7 { + mux { + pins = "gpio84", "gpio85"; + function = "gsbi7"; + }; + + pinconf { + pins = "gpio84", "gpio85"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c7_pins_sleep: i2c7_pins_sleep { + mux { + pins = "gpio84", "gpio85"; + function = "gpio"; + }; + pinconf { + pins = "gpio84", "gpio85"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 04f541bffbdd..df96ccdc9bb4 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -124,6 +124,95 @@ hwlocks = <&sfpb_mutex 3>; }; + smd { + compatible = "qcom,smd"; + + modem@0 { + interrupts = <0 37 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 3>; + qcom,smd-edge = <0>; + + status = "disabled"; + }; + + q6@1 { + interrupts = <0 90 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 15>; + qcom,smd-edge = <1>; + + status = "disabled"; + }; + + dsps@3 { + interrupts = <0 138 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&sps_sic_non_secure 0x4080 0>; + qcom,smd-edge = <3>; + + status = "disabled"; + }; + + riva@6 { + interrupts = <0 198 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 25>; + qcom,smd-edge = <6>; + + status = "disabled"; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&l2cc 8 4>; + qcom,ipc-2 = <&l2cc 8 14>; + qcom,ipc-3 = <&l2cc 8 23>; + qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <0 38 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + q6_smsm: q6@2 { + reg = <2>; + interrupts = <0 89 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@3 { + reg = <3>; + interrupts = <0 204 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + dsps_smsm: dsps@4 { + reg = <4>; + interrupts = <0 137 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -212,6 +301,11 @@ regulator; }; + sps_sic_non_secure: sps-sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; + }; + gsbi1: gsbi@12440000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -225,9 +319,20 @@ syscon-tcsr = <&tcsr>; + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 0x0>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; @@ -255,7 +360,8 @@ gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_pins_sleep>; pinctrl-names = "default", "sleep"; interrupts = <0 196 IRQ_TYPE_NONE>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; @@ -277,7 +383,8 @@ ranges; gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-1 = <&i2c3_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; @@ -302,7 +409,8 @@ gsbi4_i2c: i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-1 = <&i2c4_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16380000 0x1000>; interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; @@ -337,7 +445,8 @@ compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; interrupts = <0 155 0>; - pinctrl-0 = <&spi5_default &spi5_sleep>; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; pinctrl-names = "default", "sleep"; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -370,7 +479,8 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-1 = <&i2c6_pins_sleep>; pinctrl-names = "default", "sleep"; reg = <0x16580000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; @@ -401,6 +511,19 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c7_pins>; + pinctrl-1 = <&i2c7_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16680000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI7_QUP_CLK>, + <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; }; rng@1a500000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts new file mode 100644 index 000000000000..0d92f1bc3a13 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -0,0 +1,22 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019-ap.dk01.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; + +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi new file mode 100644 index 000000000000..b9457dd21a69 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -0,0 +1,112 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; + compatible = "qcom,ipq4019"; + + clocks { + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + soc { + + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <48000000>; + }; + + pinctrl@0x01000000 { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio54"; + }; + pinconf { + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + }; + + blsp_dma: dma@7884000 { + status = "ok"; + }; + + spi_0: spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 54 0>; + + mx25l25635e@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "mx25l25635e"; + spi-max-frequency = <24000000>; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + cryptobam: dma@8e04000 { + status = "ok"; + }; + + crypto@8e3a000 { + status = "ok"; + }; + + watchdog@b017000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi new file mode 100644 index 000000000000..5c08d19066c2 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -0,0 +1,267 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq4019.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019"; + compatible = "qcom,ipq4019"; + interrupt-parent = <&intc>; + + aliases { + spi0 = &spi_0; + i2c0 = &i2c_0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v1"; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + reg = <0x0>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v1"; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + reg = <0x1>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v1"; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + reg = <0x2>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "qcom,kpss-acc-v1"; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + reg = <0x3>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + }; + }; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq4019"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x1800000 0x60000>; + }; + + tlmm: pinctrl@0x01000000 { + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + spi_0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_0: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x6000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + cryptobam: dma@8e04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x08e04000 0x20000>; + interrupts = <GIC_SPI 207 0>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + status = "disabled"; + }; + + crypto@8e3a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x08e3a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; + + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; + + saw0: regulator@b089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; + + saw1: regulator@b099000 { + compatible = "qcom,saw2"; + reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; + + saw2: regulator@b0a9000 { + compatible = "qcom,saw2"; + reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; + + saw3: regulator@b0b9000 { + compatible = "qcom,saw2"; + reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; + + serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <0 107 0>; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 1>, <&blsp_dma 0>; + dma-names = "rx", "tx"; + }; + + serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <0 108 0>; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 3>, <&blsp_dma 2>; + dma-names = "rx", "tx"; + }; + + watchdog@b017000 { + compatible = "qcom,kpss-standalone"; + reg = <0xb017000 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + status = "disabled"; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8193139d0d87..6f164266a010 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -49,8 +49,13 @@ no-map; }; - efs@0fd600000 { - reg = <0x0fd60000 0x1a0000>; + rfsa@0fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@0fd80000 { + reg = <0x0fd80000 0x180000>; no-map; }; @@ -163,6 +168,31 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-wcnss { compatible = "qcom,smp2p"; qcom,smem = <451>, <431>; @@ -440,6 +470,17 @@ interrupts = <0 208 0>; }; + i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <0 96 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; @@ -482,6 +523,13 @@ smd { compatible = "qcom,smd"; + modem { + interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + }; + rpm { interrupts = <0 168 1>; qcom,ipc = <&apcs 8 0>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 89e46ebef1bc..e8e2a5d71976 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -37,46 +37,41 @@ #size-cells = <1>; /* External clocks */ - extal_clk: extal_clk { + extal_clk: extal { #clock-cells = <0>; compatible = "fixed-clock"; /* If clk present, value must be set by board */ clock-frequency = <0>; - clock-output-names = "extal"; }; - usb_x1_clk: usb_x1_clk { + usb_x1_clk: usb_x1 { #clock-cells = <0>; compatible = "fixed-clock"; /* If clk present, value must be set by board */ clock-frequency = <0>; - clock-output-names = "usb_x1"; }; /* Fixed factor clocks */ - b_clk: b_clk { + b_clk: b { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <3>; - clock-output-names = "b"; }; - p1_clk: p1_clk { + p1_clk: p1 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <6>; - clock-output-names = "p1"; }; - p0_clk: p0_clk { + p0_clk: p0 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <12>; - clock-output-names = "p0"; }; /* Special CPG clocks */ diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 590257095700..93ace33e3e36 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -189,28 +189,28 @@ &pfc { scifa0_pins: serial0 { - renesas,groups = "scifa0_data"; - renesas,function = "scifa0"; + groups = "scifa0_data"; + function = "scifa0"; }; mmc0_pins: mmc { - renesas,groups = "mmc0_data8", "mmc0_ctrl"; - renesas,function = "mmc0"; + groups = "mmc0_data8", "mmc0_ctrl"; + function = "mmc0"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; keyboard_pins: keyboard { - renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327", - "PORT328", "PORT329"; + pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328", + "PORT329"; bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6583a1dfca1f..6954912a3753 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -486,37 +486,32 @@ ranges; /* External root clocks */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "extal2"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -540,171 +535,151 @@ #clock-cells = <0>; clock-output-names = "zb"; }; - sdhi0_clk: sdhi0_clk@e6150074 { + sdhi0_clk: sdhi0ck@e6150074 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150074 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi0ck"; }; - sdhi1_clk: sdhi1_clk@e6150078 { + sdhi1_clk: sdhi1ck@e6150078 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi1ck"; }; - sdhi2_clk: sdhi2_clk@e615007c { + sdhi2_clk: sdhi2ck@e615007c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615007c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi2ck"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - mmc1_clk: mmc1_clk@e6150244 { + mmc1_clk: mmc1@e6150244 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150244 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mmc1"; }; - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150008 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615000c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - vclk3_clk: vclk3_clk@e615001c { + vclk3_clk: vclk3@e615001c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615001c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk3"; }; - vclk4_clk: vclk4_clk@e6150014 { + vclk4_clk: vclk4@e6150014 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150014 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk4"; }; - vclk5_clk: vclk5_clk@e6150034 { + vclk5_clk: vclk5@e6150034 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150034 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk5"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150018 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&fsiack_clk>, <0>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - fsib_clk: fsib_clk@e6150090 { + fsib_clk: fsib@e6150090 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150090 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&fsibck_clk>, <0>; #clock-cells = <0>; - clock-output-names = "fsib"; }; - mp_clk: mp_clk@e6150080 { + mp_clk: mp@e6150080 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150080 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mp"; }; - m4_clk: m4_clk@e6150098 { + m4_clk: m4@e6150098 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150098 0 4>; clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>; #clock-cells = <0>; - clock-output-names = "m4"; }; - hsi_clk: hsi_clk@e615026c { + hsi_clk: hsi@e615026c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; #clock-cells = <0>; - clock-output-names = "hsi"; }; - spuv_clk: spuv_clk@e6150094 { + spuv_clk: spuv@e6150094 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150094 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spuv"; }; /* Fixed factor clocks */ - main_div2_clk: main_div2_clk { + main_div2_clk: main_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_MAIN>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "main_div2"; }; - pll0_div2_clk: pll0_div2_clk { + pll0_div2_clk: pll0_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_PLL0>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll0_div2"; }; - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - extal1_div2_clk: extal1_div2_clk { + extal1_div2_clk: extal1_div2 { compatible = "fixed-factor-clock"; clocks = <&extal1_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "extal1_div2"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index c548cabb102f..2c82dab2b6f4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -228,44 +228,44 @@ pinctrl-names = "default"; ether_pins: ether { - renesas,groups = "gether_mii", "gether_int"; - renesas,function = "gether"; + groups = "gether_mii", "gether_int"; + function = "gether"; }; scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; + groups = "scifa1_data"; + function = "scifa1"; }; st1232_pins: touchscreen { - renesas,groups = "intc_irq10"; - renesas,function = "intc"; + groups = "intc_irq10"; + function = "intc"; }; backlight_pins: backlight { - renesas,groups = "tpu0_to2_1"; - renesas,function = "tpu0"; + groups = "tpu0_to2_1"; + function = "tpu0"; }; mmc0_pins: mmc0 { - renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; - renesas,function = "mmc0"; + groups = "mmc0_data8_1", "mmc0_ctrl_1"; + function = "mmc0"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; + function = "sdhi0"; }; fsia_pins: sounda { - renesas,groups = "fsia_sclk_in", "fsia_mclk_out", - "fsia_data_in_1", "fsia_data_out_0"; - renesas,function = "fsia"; + groups = "fsia_sclk_in", "fsia_mclk_out", + "fsia_data_in_1", "fsia_data_out_0"; + function = "fsia"; }; lcd0_pins: lcd0 { - renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; - renesas,function = "lcd0"; + groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; + function = "lcd0"; /* DBGMD/LCDC0/FSIA MUX */ gpio-hog; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 995fbda74b7a..39b2f88ad151 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -422,53 +422,45 @@ ranges; /* External root clock */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal2"; }; - dv_clk: dv_clk { + dv_clk: dv { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; - clock-output-names = "dv"; }; - fmsick_clk: fmsick_clk { + fmsick_clk: fmsick { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fmsick"; }; - fmsock_clk: fmsock_clk { + fmsock_clk: fmsock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fmsock"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -486,7 +478,7 @@ }; /* Variable factor clocks (DIV6) */ - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, @@ -494,9 +486,8 @@ <&extal1_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, @@ -504,77 +495,67 @@ <&extal1_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - fmsi_clk: fmsi_clk@e6150010 { + fmsi_clk: fmsi@e6150010 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150010 4>; clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fmsi"; }; - fmso_clk: fmso_clk@e6150014 { + fmso_clk: fmso@e6150014 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fmso"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - sub_clk: sub_clk@e6150080 { + sub_clk: sub@e6150080 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; clocks = <&pllc1_div2_clk>, <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "sub"; }; - spu_clk: spu_clk@e6150084 { + spu_clk: spu@e6150084 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; clocks = <&pllc1_div2_clk>, <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "spu"; }; - vou_clk: vou_clk@e6150088 { + vou_clk: vou@e6150088 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>, <0>; #clock-cells = <0>; - clock-output-names = "vou"; }; - stpro_clk: stpro_clk@e615009c { + stpro_clk: stpro@e615009c { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; clocks = <&cpg_clocks R8A7740_CLK_PLLC0>; #clock-cells = <0>; - clock-output-names = "stpro"; }; /* Fixed factor clocks */ - pllc1_div2_clk: pllc1_div2_clk { + pllc1_div2_clk: pllc1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7740_CLK_PLLC1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pllc1_div2"; }; - extal1_div2_clk: extal1_div2_clk { + extal1_div2_clk: extal1_div2 { compatible = "fixed-factor-clock"; clocks = <&extal1_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "extal1_div2"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 21e3b9dda2da..e0dab1464648 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -130,53 +130,53 @@ pinctrl-names = "default"; scif0_pins: serial0 { - renesas,groups = "scif0_data_a", "scif0_ctrl"; - renesas,function = "scif0"; + groups = "scif0_data_a", "scif0_ctrl"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; mmc_pins: mmc { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi0_pup_pins: sd0_pup { - renesas,groups = "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_cd", "sdhi0_wp"; + function = "sdhi0"; bias-pull-up; }; hspi0_pins: hspi0 { - renesas,groups = "hspi0_a"; - renesas,function = "hspi0"; + groups = "hspi0_a"; + function = "hspi0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; vin1_pins: vin1 { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index f83a348fc07a..fe787b4751d2 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -443,11 +443,10 @@ ranges; /* External input clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -456,7 +455,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* Special CPG clocks */ @@ -474,59 +472,51 @@ audio_clk_a: audio_clk_a { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_c"; }; /* Fixed ratio clocks */ - g_clk: g_clk { + g_clk: g { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "g"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; - clock-output-names = "i"; }; - s3_clk: s3_clk { + s3_clk: s3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "s3"; }; - s4_clk: s4_clk { + s4_clk: s4 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "s4"; }; - z_clk: z_clk { + z_clk: z { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLB>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; - clock-output-names = "z"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index e111d35d02ae..b795da6f5503 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -170,49 +170,49 @@ du_pins: du { du0 { - renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; - renesas,function = "du0"; + groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + function = "du0"; }; du1 { - renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; - renesas,function = "du1"; + groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; + function = "du1"; }; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk_b"; - renesas,function = "scif_clk"; + groups = "scif_clk_b"; + function = "scif_clk"; }; ethernet_pins: ethernet { intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; + groups = "intc_irq1_b"; + function = "intc"; }; lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; + groups = "lbsc_ex_cs0"; + function = "lbsc"; }; }; scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; + groups = "scif2_data_c"; + function = "scif2"; }; scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; + groups = "scif4_data"; + function = "scif4"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + function = "sdhi0"; }; hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; + groups = "hspi0"; + function = "hspi0"; }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index a0cc08e6295b..0c82097daffc 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -67,7 +67,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cpg_clocks R8A7779_CLK_ZS>; }; @@ -445,12 +445,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -459,7 +458,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* Special CPG clocks */ @@ -474,37 +472,33 @@ }; /* Fixed factor clocks */ - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - s3_clk: s3_clk { + s3_clk: s3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "s3"; }; - s4_clk: s4_clk { + s4_clk: s4 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <16>; clock-mult = <1>; - clock-output-names = "s4"; }; - g_clk: g_clk { + g_clk: g { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "g"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aa6ca92a9485..749ba02b6a53 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -176,11 +176,10 @@ 1800000 0>; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { @@ -314,119 +313,133 @@ pinctrl-names = "default"; du_pins: du { - renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data"; - renesas,function = "scif0"; + groups = "scif0_data"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; + groups = "scifa1_data"; + function = "scifa1"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; mmc1_pins: mmc1 { - renesas,groups = "mmc1_data8", "mmc1_ctrl"; - renesas,function = "mmc1"; + groups = "mmc1_data8", "mmc1_ctrl"; + function = "mmc1"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; msiof1_pins: spi2 { - renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", + groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", "msiof1_tx"; - renesas,function = "msiof1"; + function = "msiof1"; }; i2c0_pins: i2c0 { - renesas,groups = "i2c0"; - renesas,function = "i2c0"; + groups = "i2c0"; + function = "i2c0"; }; iic0_pins: iic0 { - renesas,groups = "iic0"; - renesas,function = "iic0"; + groups = "iic0"; + function = "iic0"; }; iic1_pins: iic1 { - renesas,groups = "iic1"; - renesas,function = "iic1"; + groups = "iic1"; + function = "iic1"; }; iic2_pins: iic2 { - renesas,groups = "iic2"; - renesas,function = "iic2"; + groups = "iic2"; + function = "iic2"; }; iic3_pins: iic3 { - renesas,groups = "iic3"; - renesas,function = "iic3"; + groups = "iic3"; + function = "iic3"; }; hsusb_pins: hsusb { - renesas,groups = "usb0_ovc_vbus"; - renesas,function = "usb0"; + groups = "usb0_ovc_vbus"; + function = "usb0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; usb2_pins: usb2 { - renesas,groups = "usb2"; - renesas,function = "usb2"; + groups = "usb2"; + function = "usb2"; }; vin1_pins: vin { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; @@ -539,21 +552,25 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 38b706399a6b..935064fe7b13 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -589,6 +589,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; + max-frequency = <195000000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -600,6 +601,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; + max-frequency = <195000000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -611,6 +613,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; + max-frequency = <97500000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -622,6 +625,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; + max-frequency = <97500000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -732,6 +736,20 @@ status = "disabled"; }; + scif2: serial@e6e56000 { + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e56000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + hscif0: serial@e62c0000 { compatible = "renesas,hscif-r8a7790", "renesas,rcar-gen2-hscif", "renesas,hscif"; @@ -968,7 +986,7 @@ }; can0: can@e6e80000 { - compatible = "renesas,can-r8a7790"; + compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, @@ -979,7 +997,7 @@ }; can1: can@e6e88000 { - compatible = "renesas,can-r8a7790"; + compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, @@ -990,7 +1008,7 @@ }; jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7790"; + compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; @@ -1003,21 +1021,18 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus_clk { + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; - clock-output-names = "pcie_bus"; - status = "disabled"; + clock-frequency = <0>; }; /* @@ -1028,19 +1043,16 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External SCIF clock */ @@ -1049,15 +1061,13 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal_clk { + usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "usb_extal"; }; /* External CAN clock */ @@ -1066,8 +1076,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "can_clk"; - status = "disabled"; }; /* Special CPG clocks */ @@ -1084,201 +1092,176 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - mmc1_clk: mmc1_clk@e6150244 { + mmc1_clk: mmc1@e6150244 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150244 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc1"; }; - ssp_clk: ssp_clk@e6150248 { + ssp_clk: ssp@e6150248 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150248 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssp"; }; - ssprs_clk: ssprs_clk@e615024c { + ssprs_clk: ssprs@e615024c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615024c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssprs"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - z2_clk: z2_clk { + z2_clk: z2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "z2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - imp_clk: imp_clk { + imp_clk: imp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "imp"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ @@ -1334,19 +1317,19 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, + clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < - R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1 >; clock-output-names = - "iic2", "tpu0", "mmcif1", "sdhi3", + "iic2", "tpu0", "mmcif1", "scif2", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "iic0", "pciec", "iic1", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; @@ -1531,7 +1514,7 @@ }; xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7790"; + compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index cc6e28f81fe4..da59c2844b8a 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,11 +242,10 @@ 1800000 0>; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { @@ -324,89 +323,89 @@ pinctrl-names = "default"; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif1_pins: serial1 { - renesas,groups = "scif1_data_d"; - renesas,function = "scif1"; + groups = "scif1_data_d"; + function = "scif1"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; msiof0_pins: spi1 { - renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", "msiof0_tx"; - renesas,function = "msiof0"; + function = "msiof0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin1_pins: vin1 { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index a9285d9a57cd..6a1bb1a8209b 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -113,11 +113,10 @@ clock-frequency = <74250000>; }; - x14_clk: x14-clock { + x14_clk: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; sound { @@ -144,73 +143,73 @@ &pfc { scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; can0_pins: can0 { - renesas,groups = "can0_data"; - renesas,function = "can0"; + groups = "can0_data"; + function = "can0"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; ssi_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; audio_clk_pins: audio_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 1cd1b6a3a72a..565c270e549d 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1013,7 +1013,7 @@ }; can0: can@e6e80000 { - compatible = "renesas,can-r8a7791"; + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, @@ -1024,7 +1024,7 @@ }; can1: can@e6e88000 { - compatible = "renesas,can-r8a7791"; + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, @@ -1035,7 +1035,7 @@ }; jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7791"; + compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_JPU>; @@ -1048,12 +1048,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* @@ -1064,27 +1063,23 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus_clk { + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "pcie_bus"; }; /* External SCIF clock */ @@ -1096,11 +1091,10 @@ }; /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal_clk { + usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "usb_extal"; }; /* External CAN clock */ @@ -1109,7 +1103,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "can_clk"; }; /* Special CPG clocks */ @@ -1126,178 +1119,156 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - ssp_clk: ssp_clk@e6150248 { + ssp_clk: ssp@e6150248 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150248 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssp"; }; - ssprs_clk: ssprs_clk@e615024c { + ssprs_clk: ssprs@e615024c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615024c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssprs"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ @@ -1546,7 +1517,7 @@ }; xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7791"; + compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 87e89ec9dd47..0ebc3ee34923 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -158,11 +158,82 @@ }; }; - audio_clock: clock { + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi1: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@4 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi2: regulator@5 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { @@ -240,53 +311,68 @@ pinctrl-names = "default"; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif1_pins: serial1 { - renesas,groups = "scif1_data_d"; - renesas,function = "scif1"; + groups = "scif1_data_d"; + function = "scif1"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi1_pins: sd1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; @@ -329,6 +415,38 @@ status = "okay"; }; +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index b48215945241..cf6dc2aeef20 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -507,6 +507,39 @@ reg = <0 0xe6060000 0 0x250>; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7793"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7793"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7793"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7793", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -806,18 +839,39 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_RCAN0>, + <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_RCAN1>, + <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* @@ -828,19 +882,31 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; /* External SCIF clock */ @@ -849,7 +915,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* Special CPG clocks */ @@ -857,7 +922,7 @@ compatible = "renesas,r8a7793-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "z", @@ -866,111 +931,98 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <5>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ @@ -1098,6 +1150,7 @@ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; @@ -1107,7 +1160,8 @@ R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5 + R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1 + R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5 R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 @@ -1115,8 +1169,9 @@ clock-output-names = "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "qspi_mod", "i2c5", "i2c6", "i2c4", - "i2c3", "i2c2", "i2c1", "i2c0"; + "rcan1", "rcan0", "qspi_mod", "i2c5", + "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", + "i2c0"; }; mstp10_clks: mstp10_clks@e6150998 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index ca9bc4fff287..383ad791f1db 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -107,38 +107,38 @@ pinctrl-names = "default"; du_pins: du { - renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; - renesas,function = "du"; + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; + function = "du"; }; scif2_pins: serial2 { - renesas,groups = "scif2_data"; - renesas,function = "scif2"; + groups = "scif2_data"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq8"; - renesas,function = "intc"; + groups = "intc_irq8"; + function = "intc"; }; i2c1_pins: i2c1 { - renesas,groups = "i2c1"; - renesas,function = "i2c1"; + groups = "i2c1"; + function = "i2c1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; }; @@ -148,8 +148,8 @@ &pfc { qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 66f077a3ca41..56d98d5b2185 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -130,58 +130,58 @@ pinctrl-names = "default"; scif2_pins: serial2 { - renesas,groups = "scif2_data"; - renesas,function = "scif2"; + groups = "scif2_data"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq8"; - renesas,function = "intc"; + groups = "intc_irq8"; + function = "intc"; }; i2c1_pins: i2c1 { - renesas,groups = "i2c1"; - renesas,function = "i2c1"; + groups = "i2c1"; + function = "i2c1"; }; mmcif0_pins: mmcif0 { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index eacb2b291361..e45b23f31149 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -26,6 +26,8 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; spi0 = &qspi; vin0 = &vin0; vin1 = &vin1; @@ -629,6 +631,32 @@ status = "disabled"; }; + i2c6: i2c@e6500000 { + compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@e6510000 { + compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; @@ -830,18 +858,54 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_RCAN0>, + <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_RCAN1>, + <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; /* External SCIF clock */ @@ -850,7 +914,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* Special CPG clocks */ @@ -858,180 +921,160 @@ compatible = "renesas,r8a7794-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z"; + "lb", "qspi", "sdh", "sd0", "z", + "rcan"; #power-domain-cells = <0>; }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cp"; }; - acp_clk: acp_clk { + acp_clk: acp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "acp"; }; /* Gate clocks */ @@ -1082,16 +1125,19 @@ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>, - <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0 - R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1 + R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0 + R8A7794_CLK_IIC1 R8A7794_CLK_CMT1 R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1 >; clock-output-names = "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; + "mmcif0", "i2c6", "i2c7", + "cmt1", "usbdmac0", "usbdmac1"; }; mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1137,20 +1183,22 @@ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>, + <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1 - R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD + R8A7794_CLK_GPIO0 R8A7794_CLK_RCAN1 + R8A7794_CLK_RCAN0 R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>; clock-output-names = "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", - "gpio1", "gpio0", "qspi_mod", + "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index b3d6ec87f615..8db9e9b197a2 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -45,6 +45,11 @@ / { model = "Rockchip RK3036 Evaluation board"; compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; }; &emac { diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 6251d109eff4..1df1557a46c3 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,6 +46,11 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + memory { + device_type = "memory"; + reg = <0x60000000 0x20000000>; + }; + leds: gpio-leds { compatible = "gpio-leds"; @@ -130,6 +135,10 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; @@ -341,7 +350,6 @@ &sdio { status = "okay"; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; @@ -385,6 +393,14 @@ status = "okay"; }; +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + &pinctrl { leds { led_ctl: led-ctl { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d0f4bb7e1e50..843d2be2e4e9 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -63,11 +63,6 @@ spi = &spi; }; - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -119,6 +114,11 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + timer { compatible = "arm,armv7-timer"; arm,cpu-registers-not-fw-configured; @@ -149,6 +149,36 @@ }; }; + vop: vop@10118000 { + compatible = "rockchip,rk3036-vop"; + reg = <0x10118000 0x19c>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + + vop_mmu: iommu@10118300 { + compatible = "rockchip,iommu"; + reg = <0x10118300 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vop_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@10139000 { compatible = "arm,gic-400"; interrupt-controller; @@ -237,7 +267,6 @@ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - broken-cd; bus-width = <8>; cap-mmc-highspeed; clock-frequency = <37500000>; @@ -297,6 +326,27 @@ status = "disabled"; }; + hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + status = "disabled"; + + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + timer: timer@20044000 { compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; @@ -644,6 +694,15 @@ }; }; + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, + <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>, + <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 6d2a5b3a84a8..bc674ee206ec 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -77,21 +78,19 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + power { gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; debounce-interval = <100>; }; - button@1 { + volume-down { gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ - linux,code = <104>; + linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; debounce-interval = <100>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 05533005a809..6e7f2187a0e3 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -61,14 +62,12 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + power { wakeup-source; gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; }; @@ -182,7 +181,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; @@ -348,7 +346,6 @@ }; &mmc1 { - broken-cd; bus-width = <4>; disable-wp; non-removable; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index cb0a552e0b18..c0ba86c3a2ab 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -169,7 +169,7 @@ clocks = <&cru PCLK_EFUSE>; clock-names = "pclk_efuse"; - cpu_leakage: cpu_leakage { + cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; }; @@ -207,7 +207,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@17c { #phy-cells = <0>; reg = <0x17c>; clocks = <&cru SCLK_OTGPHY0>; @@ -215,7 +215,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@188 { #phy-cells = <0>; reg = <0x188>; clocks = <&cru SCLK_OTGPHY1>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 0b6924c97b6b..1da46d138029 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3188.dtsi" / { @@ -54,13 +55,11 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + power { gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 9271833958f9..31f81b265cef 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -154,7 +154,7 @@ clocks = <&cru PCLK_EFUSE>; clock-names = "pclk_efuse"; - cpu_leakage: cpu_leakage { + cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; }; @@ -166,7 +166,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@10c { #phy-cells = <0>; reg = <0x10c>; clocks = <&cru SCLK_OTGPHY0>; @@ -174,7 +174,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@11c { #phy-cells = <0>; reg = <0x11c>; clocks = <&cru SCLK_OTGPHY1>; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index e3898b810150..5956e8246abe 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -53,7 +53,6 @@ }; &emmc { - broken-cd; cap-mmc-highspeed; mmc-ddr-1_8v; disable-wp; @@ -61,6 +60,13 @@ status = "okay"; }; +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi index 4dae42a01509..e23a22e29155 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3228-cru.h> +#include <dt-bindings/thermal/thermal.h> #include "skeleton.dtsi" / { @@ -69,6 +70,7 @@ /* KHz uV */ 816000 1000000 >; + #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; @@ -185,6 +187,58 @@ status = "disabled"; }; + i2c0: i2c@11050000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11050000 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + i2c1: i2c@11060000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11060000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c2: i2c@11070000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11070000 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + i2c3: i2c@11080000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11080000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + pwm0: pwm@110b0000 { compatible = "rockchip,rk3288-pwm"; reg = <0x110b0000 0x10>; @@ -247,6 +301,63 @@ assigned-clock-rates = <594000000>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + tsadc: tsadc@11150000 { + compatible = "rockchip,rk3228-tsadc"; + reg = <0x11150000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <0>; + rockchip,hw-tshut-temp = <95000>; + status = "disabled"; + }; + emmc: dwmmc@30020000 { compatible = "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; @@ -370,6 +481,34 @@ }; }; + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, + <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, + <0 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, + <2 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; @@ -394,6 +533,16 @@ }; }; + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 78d47f7d2938..963365d12208 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -38,6 +38,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" @@ -98,16 +99,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; @@ -172,7 +171,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 98c586a43c73..d6cf9ada13c9 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include "rk3288.dtsi" / { @@ -87,14 +88,12 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + power { wakeup-source; gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; }; @@ -208,7 +207,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; @@ -509,7 +507,6 @@ }; &sdio0 { - broken-cd; bus-width = <4>; disable-wp; non-removable; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts new file mode 100644 index 000000000000..8643103d8cd8 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -0,0 +1,472 @@ +/* + * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3288.dtsi" + +/ { + model = "mqmaker MiQi"; + compatible = "mqmaker,miqi", "rockchip,rk3288"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + + audio-supply = <&vcca_33>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; + }; + + leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + label = "miqi:green:user"; + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + }; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_vsel>; + system-power-controller; + + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "vcc_ddr"; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "vcc_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "vdd10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_18: REG7 { + regulator-name = "vcca_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcca_33: REG8 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_lan: REG9 { + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_10: REG10 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + act8846 { + pmic_int: pmic-int { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pmic_sleep: pmic-sleep { + rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pmic_vsel: pmic-vsel { + rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + leds { + led_ctl: led-ctl { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + /* + * The otg controller is the only system power source, + * so needs to always stay in device mode. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 2ff9689d2e1b..720717bb3614 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -41,7 +41,7 @@ */ /dts-v1/; - +#include <dt-bindings/input/input.h> #include "rk3288.dtsi" / { @@ -62,16 +62,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; @@ -162,7 +160,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 510a1d0d7abb..4b8a8adb243c 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" @@ -61,16 +62,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 610769d99522..2958c36d12a0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -54,6 +54,50 @@ i2c20 = &i2c_tunnel; }; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + backlight-boot-off; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + pwm-delay-us = <10000>; + }; + gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; @@ -62,6 +106,21 @@ pinctrl-0 = <&ac_present_ap>; }; + panel: panel { + compatible ="innolux,n116bge", "simple-panel"; + status = "okay"; + power-supply = <&vcc33_lcd>; + backlight = <&backlight>; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; @@ -103,6 +162,29 @@ }; }; +&edp { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { @@ -115,6 +197,10 @@ }; }; +&pwm0 { + status = "okay"; +}; + &rk808 { vcc11-supply = <&vcc_5v>; @@ -168,6 +254,14 @@ }; }; +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ @@ -184,6 +278,12 @@ &suspend_l_sleep >; + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index c2f52cfb4d06..3748abf562b1 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -61,6 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -88,6 +89,48 @@ }; }; +&backlight { + /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ + brightness-levels = < + 0 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply = <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; @@ -142,12 +185,6 @@ }; }; - edp { - edp_hpd: edp_hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; - }; - }; - hdmi { vcc50_hdmi_en: vcc50-hdmi-en { rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 60bd6e91e308..f6b2eaaebb9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -60,6 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -87,6 +88,14 @@ }; }; +&backlight { + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 699beb0a9481..f72d616d1bf8 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -70,6 +70,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -86,6 +87,44 @@ }; }; +&backlight { + /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ + brightness-levels = < + 0 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + power-supply = <&backlight_regulator>; +}; + &emmc { /delete-property/mmc-hs200-1_8v; }; @@ -135,6 +174,11 @@ }; }; +&panel { + compatible = "auo,b101ean01", "simple-panel"; + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 94b56e33d947..d44351ec2333 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -65,6 +65,13 @@ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index b34a7b5b3f62..a0d033f6fe52 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -61,6 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -88,6 +89,10 @@ }; }; +&backlight { + power-supply = <&backlight_regulator>; +}; + &cpu_alert0 { temperature = <65000>; }; @@ -96,6 +101,17 @@ temperature = <70000>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 412809c60d01..b2557bf5a58f 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -141,12 +141,27 @@ &cpu0 { cpu0-supply = <&vdd_cpu>; + operating-points = < + /* KHz uV */ + 1800000 1400000 + 1704000 1350000 + 1608000 1300000 + 1512000 1250000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 216000 900000 + 126000 900000 + >; }; &emmc { status = "okay"; - broken-cd; bus-width = <8>; cap-mmc-highspeed; rockchip,default-sample-phase = <158>; @@ -347,7 +362,6 @@ &sdio0 { status = "okay"; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 31f7e20ef418..3b44ef3cff12 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -445,7 +445,78 @@ }; thermal-zones { - #include "rk3288-thermal.dtsi" + reserve_thermal: reserve_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + }; + + cpu_thermal: cpu_thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 1>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu_thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 2>; + + trips { + gpu_alert0: gpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; }; tsadc: tsadc@ff280000 { @@ -659,7 +730,7 @@ * *_HDMI HDMI * *_MIPI_* MIPI */ - pd_vio { + pd_vio@RK3288_PD_VIO { reg = <RK3288_PD_VIO>; clocks = <&cru ACLK_IEP>, <&cru ACLK_ISP>, @@ -692,7 +763,7 @@ * Note: The following 3 are HEVC(H.265) clocks, * and on the ACLK_HEVC_NIU (NOC). */ - pd_hevc { + pd_hevc@RK3288_PD_HEVC { reg = <RK3288_PD_HEVC>; clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, @@ -704,7 +775,7 @@ * (video endecoder & decoder) clocks that on the * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). */ - pd_video { + pd_video@RK3288_PD_VIDEO { reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; @@ -714,7 +785,7 @@ * Note: ACLK_GPU is the GPU clock, * and on the ACLK_GPU_NIU (NOC). */ - pd_gpu { + pd_gpu@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; }; @@ -745,8 +816,16 @@ }; grf: syscon@ff770000 { - compatible = "rockchip,rk3288-grf", "syscon"; + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; reg = <0xff770000 0x1000>; + + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + #phy-cells = <0>; + status = "disabled"; + }; }; wdt: watchdog@ff800000 { @@ -765,7 +844,7 @@ clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; dmas = <&dmac_bus_s 3>; dma-names = "tx"; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spdif_tx>; rockchip,grf = <&grf>; @@ -775,7 +854,7 @@ i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; @@ -821,6 +900,12 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopb>; }; + + vopb_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopb>; + }; + vopb_out_mipi: endpoint@2 { reg = <2>; remote-endpoint = <&mipi_in_vopb>; @@ -858,6 +943,12 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopl>; }; + + vopl_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopl>; + }; + vopl_out_mipi: endpoint@2 { reg = <2>; remote-endpoint = <&mipi_in_vopl>; @@ -878,19 +969,16 @@ mipi_dsi: mipi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0xff960000 0x4000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; clock-names = "ref", "pclk"; + power-domains = <&power RK3288_PD_VIO>; rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - mipi_in: port { #address-cells = <1>; #size-cells = <0>; @@ -906,6 +994,38 @@ }; }; + edp: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&edp_phy>; + phy-names = "dp"; + resets = <&cru SRST_EDP>; + reset-names = "dp"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + }; + }; + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; @@ -966,7 +1086,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@320 { #phy-cells = <0>; reg = <0x320>; clocks = <&cru SCLK_OTGPHY0>; @@ -974,7 +1094,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@334 { #phy-cells = <0>; reg = <0x334>; clocks = <&cru SCLK_OTGPHY1>; @@ -982,7 +1102,7 @@ #clock-cells = <0>; }; - usbphy2: usb-phy2 { + usbphy2: usb-phy@348 { #phy-cells = <0>; reg = <0x348>; clocks = <&cru SCLK_OTGPHY2>; @@ -1158,6 +1278,12 @@ }; }; + edp { + edp_hpd: edp-hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index 54fcc3fc82e2..9eb6aff3e38f 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -197,7 +197,7 @@ display-timings { native-mode = <&timing0>; - timing0: timing@0 { + timing0: timing { /* 800x480@60Hz */ clock-frequency = <24373920>; hactive = <800>; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index b0c912feaa2f..8a394f336003 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -837,8 +837,8 @@ #define PIN_PD23__ISC_FIELD PINMUX_PIN(PIN_PD23, 6, 4) #define PIN_PD24 120 #define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) -#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD23, 1, 2) -#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD24, 1, 2) +#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD24, 3, 3) #define PIN_PD25 121 #define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) #define PIN_PD25__SPI1_SPCK PINMUX_PIN(PIN_PD25, 1, 3) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 9817090c1b73..2827e7ab5ebc 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -319,6 +319,32 @@ #size-cells = <1>; ranges; + hlcdc: hlcdc@f0000000 { + compatible = "atmel,sama5d2-hlcdc"; + reg = <0xf0000000 0x2000>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + ramc0: ramc@f000c000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf000c000 0x200>; @@ -973,6 +999,11 @@ status = "disabled"; }; + sfr: sfr@f8030000 { + compatible = "atmel,sama5d2-sfr", "syscon"; + reg = <0xf8030000 0x98>; + }; + flx0: flexcom@f8034000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8034000 0x200>; @@ -999,6 +1030,15 @@ clocks = <&clk32k>; }; + shdwc@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + }; + pit: timer@f8048030 { compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; @@ -1010,6 +1050,7 @@ compatible = "atmel,sama5d4-wdt"; reg = <0xf8048040 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; @@ -1127,6 +1168,13 @@ status = "disabled"; }; + trng@fc01c000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfc01c000 0x100>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + aic: interrupt-controller@fc020000 { #interrupt-cells = <3>; compatible = "atmel,sama5d2-aic"; @@ -1193,6 +1241,11 @@ clock-names = "tdes_clk"; status = "okay"; }; + + chipid@fc069000 { + compatible = "atmel,sama5d2-chipid"; + reg = <0xfc069000 0x8>; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index a53279160f98..36301bd9a14a 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -426,6 +426,13 @@ clock-names = "tdes_clk"; }; + trng@f8040000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xf8040000 0x100>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index db1151c18466..4e2cc30d6615 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1202,6 +1202,13 @@ status = "disabled"; }; + trng@fc030000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfc030000 0x100>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; @@ -1302,6 +1309,7 @@ watchdog@fc068640 { compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index aa8bae3b8fcf..c2d8a080e392 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -149,6 +149,13 @@ label = "SW1"; wakeup-source; }; + + wakeup-key { + gpios = <&pfc 159 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + label = "NMI"; + wakeup-source; + }; }; sound { @@ -329,41 +336,41 @@ &pfc { i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; + groups = "i2c3_1"; + function = "i2c3"; }; mmcif_pins: mmc { mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; + groups = "mmc0_data8_0", "mmc0_ctrl_0"; + function = "mmc0"; }; cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; + groups = "mmc0_data8_0"; + pins = "PORT279"; bias-pull-up; }; }; scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; + groups = "scifa4_data", "scifa4_ctrl"; + function = "scifa4"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; + groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + function = "fsia"; }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index bf825ca4f6f7..c4f434cdec60 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -43,7 +43,7 @@ timer@f0000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&twd_clk>; }; @@ -602,39 +602,33 @@ ranges; /* External root clocks */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "extal2"; }; - extcki_clk: extcki_clk { + extcki_clk: extcki { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "extcki"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -650,7 +644,7 @@ }; /* Variable factor clocks (DIV6) */ - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -658,9 +652,8 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -668,9 +661,8 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - vclk3_clk: vclk3_clk@e615001c { + vclk3_clk: vclk3@e615001c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615001c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -678,7 +670,6 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk3"; }; zb_clk: zb_clk@e6150010 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; @@ -688,168 +679,148 @@ #clock-cells = <0>; clock-output-names = "zb"; }; - flctl_clk: flctl_clk@e6150014 { + flctl_clk: flctlck@e6150014 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "flctlck"; }; - sdhi0_clk: sdhi0_clk@e6150074 { + sdhi0_clk: sdhi0ck@e6150074 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150074 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi0ck"; }; - sdhi1_clk: sdhi1_clk@e6150078 { + sdhi1_clk: sdhi1ck@e6150078 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150078 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi1ck"; }; - sdhi2_clk: sdhi2_clk@e615007c { + sdhi2_clk: sdhi2ck@e615007c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615007c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi2ck"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&fsiack_clk>, <&fsiack_clk>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - fsib_clk: fsib_clk@e6150090 { + fsib_clk: fsib@e6150090 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150090 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&fsibck_clk>, <&fsibck_clk>; #clock-cells = <0>; - clock-output-names = "fsib"; }; - sub_clk: sub_clk@e6150080 { + sub_clk: sub@e6150080 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sub"; }; - spua_clk: spua_clk@e6150084 { + spua_clk: spua@e6150084 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spua"; }; - spuv_clk: spuv_clk@e6150094 { + spuv_clk: spuv@e6150094 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150094 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spuv"; }; - msu_clk: msu_clk@e6150088 { + msu_clk: msu@e6150088 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "msu"; }; - hsi_clk: hsi_clk@e615008c { + hsi_clk: hsi@e615008c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615008c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div7_clk>, <0>; #clock-cells = <0>; - clock-output-names = "hsi"; }; - mfg1_clk: mfg1_clk@e6150098 { + mfg1_clk: mfg1@e6150098 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150098 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "mfg1"; }; - mfg2_clk: mfg2_clk@e615009c { + mfg2_clk: mfg2@e615009c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "mfg2"; }; - dsit_clk: dsit_clk@e6150060 { + dsit_clk: dsit@e6150060 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150060 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "dsit"; }; - dsi0p_clk: dsi0p_clk@e6150064 { + dsi0p_clk: dsi0pck@e6150064 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150064 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>, <&extcki_clk>, <0>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "dsi0pck"; }; /* Fixed factor clocks */ - main_div2_clk: main_div2_clk { + main_div2_clk: main_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_MAIN>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "main_div2"; }; - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - pll1_div7_clk: pll1_div7_clk { + pll1_div7_clk: pll1_div7 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <7>; clock-mult = <1>; - clock-output-names = "pll1_div7"; }; - pll1_div13_clk: pll1_div13_clk { + pll1_div13_clk: pll1_div13 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <13>; clock-mult = <1>; - clock-output-names = "pll1_div13"; }; - twd_clk: twd_clk { + twd_clk: twd { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_Z>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "twd"; }; /* Gate clocks */ diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index b89cbde3b289..9f48141270b8 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -831,6 +831,8 @@ interrupts = <0 125 4>; clocks = <&usb_mp_clk>; clock-names = "otg"; + resets = <&rst USB0_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -842,6 +844,8 @@ interrupts = <0 128 4>; clocks = <&usb_mp_clk>; clock-names = "otg"; + resets = <&rst USB1_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 1c5e139e4d05..17e81dc9213e 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -78,10 +78,13 @@ <0 87 IRQ_TYPE_LEVEL_HIGH>, <0 88 IRQ_TYPE_LEVEL_HIGH>, <0 89 IRQ_TYPE_LEVEL_HIGH>, - <0 90 IRQ_TYPE_LEVEL_HIGH>; + <0 90 IRQ_TYPE_LEVEL_HIGH>, + <0 91 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + clocks = <&l4_main_clk>; + clock-names = "apb_pclk"; }; }; @@ -362,6 +365,7 @@ compatible = "altr,socfpga-a10-gate-clk"; clocks = <&sdmmc_free_clk>; clk-gate = <0xC8 5>; + clk-phase = <0 135>; }; qspi_clk: qspi_clk { @@ -589,7 +593,7 @@ reg = <0xff808000 0x1000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; fifo-depth = <0x400>; - clocks = <&l4_mp_clk>, <&sdmmc_free_clk>; + clocks = <&l4_mp_clk>, <&sdmmc_clk>; clock-names = "biu", "ciu"; status = "disabled"; }; @@ -599,6 +603,26 @@ reg = <0xffe00000 0x40000>; }; + eccmgr: eccmgr@ffd06000 { + compatible = "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 IRQ_TYPE_LEVEL_HIGH>; + ranges; + + l2-ecc@ffd06010 { + compatible = "altr,socfpga-a10-l2-ecc"; + reg = <0xffd06010 0x4>; + }; + + ocram-ecc@ff8c3000 { + compatible = "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8c3000 0x400>; + }; + }; + rst: rstmgr@ffd05000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; @@ -689,6 +713,8 @@ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk>; clock-names = "otg"; + resets = <&rst USB0_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -700,6 +726,8 @@ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk>; clock-names = "otg"; + resets = <&rst USB1_RESET>; + reset-names = "dwc2"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index dbbb751ac1ba..8a7dfa473e98 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -21,6 +21,7 @@ &mmc { status = "okay"; num-slots = <1>; + cap-sd-highspeed; broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 06db951e06f8..a05e3df23103 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -38,12 +38,6 @@ cap-sd-highspeed; }; - ethernet@ff702000 { - phy-mode = "rgmii"; - phy-addr = <0xffffffff>; /* probe for phy addr */ - status = "okay"; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index b61f22f9ac9f..02e22f554ef0 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -39,6 +39,90 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + + hps_led0 { + label = "hps:blue:led0"; + gpios = <&portb 24 0>; /* HPS_GPIO53 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led1 { + label = "hps:blue:led1"; + gpios = <&portb 25 0>; /* HPS_GPIO54 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led2 { + label = "hps:blue:led2"; + gpios = <&portb 26 0>; /* HPS_GPIO55 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led3 { + label = "hps:blue:led3"; + gpios = <&portb 27 0>; /* HPS_GPIO56 */ + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + hps_sw0 { + label = "hps_sw0"; + gpios = <&portc 20 0>; /* HPS_GPI7 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x0>; /* SW_LID */ + }; + + hps_sw1 { + label = "hps_sw1"; + gpios = <&portc 19 0>; /* HPS_GPI6 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x5>; /* SW_DOCK */ + }; + + hps_sw2 { + label = "hps_sw2"; + gpios = <&portc 18 0>; /* HPS_GPI5 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0xa>; /* SW_KEYPAD_SLIDE */ + }; + + hps_sw3 { + label = "hps_sw3"; + gpios = <&portc 17 0>; /* HPS_GPI4 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0xc>; /* SW_ROTATE_LOCK */ + }; + + hps_hkey0 { + label = "hps_hkey0"; + gpios = <&portc 21 1>; /* HPS_GPI8 */ + linux,code = <187>; /* KEY_F17 */ + }; + + hps_hkey1 { + label = "hps_hkey1"; + gpios = <&portc 22 1>; /* HPS_GPI9 */ + linux,code = <188>; /* KEY_F18 */ + }; + + hps_hkey2 { + label = "hps_hkey2"; + gpios = <&portc 23 1>; /* HPS_GPI10 */ + linux,code = <189>; /* KEY_F19 */ + }; + + hps_hkey3 { + label = "hps_hkey3"; + gpios = <&portc 24 1>; /* HPS_GPI11 */ + linux,code = <190>; /* KEY_F20 */ + }; + }; + regulator_3_3v: vcc3p3-regulator { compatible = "regulator-fixed"; regulator-name = "VCC3P3"; @@ -61,7 +145,15 @@ rxc-skew-ps = <2000>; }; -&gpio2 { +&gpio0 { /* GPIO 0..29 */ + status = "okay"; +}; + +&gpio1 { /* GPIO 30..57 */ + status = "okay"; +}; + +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */ status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 019dd2fea208..e1a61f20873f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -36,6 +36,7 @@ }; &gmac1 { + phy-mode = "rgmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts new file mode 100644 index 000000000000..a3601e4c0a2e --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "socfpga_cyclone5.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "samtec VIN|ING FPGA"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + aliases { + /* + * This allow the ethaddr uboot environment variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; + + leds { + compatible = "gpio-leds"; + + hps_led0 { + label = "hps:green:led0"; /* ALIVE_LED_GR */ + gpios = <&portb 19 0>; /* HPS_GPIO48 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led1 { + label = "hps:red:led0"; /* ALIVE_LED_RD */ + gpios = <&portb 24 0>; /* HPS_GPIO53 */ + linux,default-trigger = "none"; + }; + + hps_led2 { + label = "hps:green:led1"; /* LINK2HOST_LED_GR */ + gpios = <&portb 25 0>; /* HPS_GPIO54 */ + linux,default-trigger = "heartbeat"; + }; + + hps_led3 { + label = "hps:red:led1"; /* LINK2HOST_LED_RD */ + gpios = <&portc 7 0>; /* HPS_GPIO65 */ + linux,default-trigger = "none"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + hps_temp0 { + label = "BTN_0"; /* TEMP_OS */ + gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPIO60 */ + linux,code = <BTN_0>; + }; + + hps_hkey0 { + label = "BTN_1"; /* DIS_PWR */ + gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPIO61 */ + linux,code = <BTN_1>; + }; + + hps_hkey1 { + label = "hps_hkey1"; /* POWER_DOWN */ + gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */ + linux,code = <KEY_POWER>; + }; + }; + + regulator-usb-nrst { + compatible = "regulator-fixed"; + regulator-name = "usb_nrst"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 5 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + regulator-always-on; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + + snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <10000 10000 10000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <1>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txen-skew-ps = <0>; + txc-skew-ps = <2600>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <2000>; + }; + }; +}; + +&gpio0 { /* GPIO 0..29 */ + status = "okay"; +}; + +&gpio1 { /* GPIO 30..57 */ + status = "okay"; +}; + +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + gpio: pca9557@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + gpio-controller; + #gpio-cells = <2>; + }; + + temp: lm75@48 { + compatible = "lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c01"; + pagesize = <8>; + reg = <0x50>; + }; + + i2cswitch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + eeprom@51 { + compatible = "at,24c01"; + pagesize = <8>; + reg = <0x51>; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <8>; + reg = <0x50>; + }; +}; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index c8b815819cfe..b3b9bb8e1aa8 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -49,7 +49,7 @@ cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; - cd-gpios = <&gpio7 6 0x4>; // 230 + cd-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; // 230 cd-inverted; status = "okay"; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 341f5b7ed242..6ae56838bd3a 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -10,8 +10,10 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mfd/dbx500-prcmu.h> #include <dt-bindings/arm/ux500_pm_domains.h> +#include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" / { @@ -203,14 +205,14 @@ L2: l2-cache { compatible = "arm,pl310-cache"; reg = <0xa0412000 0x1000>; - interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; }; pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; pm_domains: pm_domains0 { @@ -253,7 +255,7 @@ /* Nomadik System Timer */ compatible = "st,nomadik-mtu"; reg = <0xa03c6000 0x1000>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; clock-names = "timclk", "apb_pclk"; @@ -262,7 +264,7 @@ timer@a0410600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xa0410600 0x20>; - interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&smp_twd_clk>; }; @@ -270,14 +272,14 @@ watchdog@a0410620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0xa0410620 0x20>; - interrupts = <1 14 0x304>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&smp_twd_clk>; }; rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; - interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rtc_clk>; clock-names = "apb_pclk"; @@ -287,7 +289,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8012e000 0x80>; - interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -302,7 +304,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8012e080 0x80>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -317,7 +319,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e000 0x80>; - interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -332,7 +334,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e080 0x80>; - interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -347,7 +349,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e100 0x80>; - interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -362,7 +364,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8000e180 0x80>; - interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -377,7 +379,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8011e000 0x80>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -392,7 +394,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0x8011e080 0x80>; - interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -407,7 +409,7 @@ compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; reg = <0xa03fe000 0x80>; - interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; st,supports-sleepmode; @@ -429,7 +431,7 @@ usb_per5@a03e0000 { compatible = "stericsson,db8500-musb"; reg = <0xa03e0000 0x10000>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; dr_mode = "otg"; @@ -467,7 +469,7 @@ compatible = "stericsson,db8500-dma40", "stericsson,dma40"; reg = <0x801C0000 0x1000 0x40010000 0x800>; reg-names = "base", "lcpa"; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <3>; memcpy-channels = <56 57 58 59 60>; @@ -479,7 +481,7 @@ compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; - interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; interrupt-controller; @@ -597,7 +599,7 @@ ab8500 { compatible = "stericsson,ab8500"; interrupt-parent = <&intc>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -785,7 +787,7 @@ i2c@80004000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -800,7 +802,7 @@ i2c@80122000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -816,7 +818,7 @@ i2c@80128000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; - interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -832,7 +834,7 @@ i2c@80110000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; - interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -848,7 +850,7 @@ i2c@8012a000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -864,7 +866,7 @@ ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; - interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; @@ -878,7 +880,7 @@ ssp@80003000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80003000 0x1000>; - interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; @@ -892,7 +894,7 @@ spi@8011a000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x8011a000 0x1000>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; /* Same clock wired to kernel and pclk */ @@ -907,7 +909,7 @@ spi@80112000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80112000 0x1000>; - interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; /* Same clock wired to kernel and pclk */ @@ -922,7 +924,7 @@ spi@80111000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80111000 0x1000>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; /* Same clock wired to kernel and pclk */ @@ -937,7 +939,7 @@ spi@80129000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80129000 0x1000>; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; /* Same clock wired to kernel and pclk */ @@ -952,7 +954,7 @@ ux500_serial0: uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */ <&dma 13 0 0x0>; /* Logical - MemToDev */ @@ -967,7 +969,7 @@ ux500_serial1: uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */ <&dma 12 0 0x0>; /* Logical - MemToDev */ @@ -982,7 +984,7 @@ ux500_serial2: uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; - interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */ <&dma 11 0 0x0>; /* Logical - MemToDev */ @@ -997,7 +999,7 @@ sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; - interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ <&dma 29 0 0x0>; /* Logical - MemToDev */ @@ -1013,7 +1015,7 @@ sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */ <&dma 32 0 0x0>; /* Logical - MemToDev */ @@ -1029,7 +1031,7 @@ sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */ <&dma 28 0 0x0>; /* Logical - MemToDev */ @@ -1045,7 +1047,7 @@ sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */ <&dma 41 0 0x0>; /* Logical - MemToDev */ @@ -1061,7 +1063,7 @@ sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; - interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */ <&dma 42 0 0x0>; /* Logical - MemToDev */ @@ -1077,7 +1079,7 @@ sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */ <&dma 43 0 0x0>; /* Logical - MemToDev */ @@ -1093,7 +1095,7 @@ msp0: msp@80123000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80123000 0x1000>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */ @@ -1109,7 +1111,7 @@ msp1: msp@80124000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80124000 0x1000>; - interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; /* This DMA channel only exist on DB8500 v1 */ @@ -1126,7 +1128,7 @@ msp2: msp@80117000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80117000 0x1000>; - interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */ @@ -1143,7 +1145,7 @@ msp3: msp@80125000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80125000 0x1000>; - interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; /* This DMA channel only exist on DB8500 v2 */ @@ -1176,7 +1178,7 @@ <0xa0351000 0x1000>, /* DSI link 1 */ <0xa0352000 0x1000>, /* DSI link 2 */ <0xa0353000 0x1000>; /* DSI link 3 */ - interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ @@ -1190,7 +1192,7 @@ cryp@a03cb000 { compatible = "stericsson,ux500-cryp"; reg = <0xa03cb000 0x1000>; - interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; clocks = <&prcc_pclk 6 1>; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index c3987ad06d79..6f720756057d 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -22,13 +22,13 @@ button@139 { /* Proximity sensor */ - gpios = <&gpio6 25 0x4>; + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; linux,code = <11>; /* SW_FRONT_PROXIMITY */ label = "SFH7741 Proximity Sensor"; }; button@145 { /* Hall sensor */ - gpios = <&gpio4 17 0x4>; + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; linux,code = <0>; /* SW_LID */ label = "HED54XXU11 Hall Effect Sensor"; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 55f9d0cc90f3..fc5e8ce700c3 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -24,13 +24,13 @@ button@139 { /* Proximity sensor */ - gpios = <&gpio6 25 0x4>; + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; linux,code = <11>; /* SW_FRONT_PROXIMITY */ label = "SFH7741 Proximity Sensor"; }; button@145 { /* Hall sensor */ - gpios = <&gpio4 17 0x4>; + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; linux,code = <0>; /* SW_LID */ label = "HED54XXU11 Hall Effect Sensor"; }; @@ -93,14 +93,15 @@ /* Accelerometer */ compatible = "st,lsm303dlh-accel"; st,drdy-int-pin = <1>; + drive-open-drain; reg = <0x18>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>, - <19 IRQ_TYPE_EDGE_RISING>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>, + <19 IRQ_TYPE_EDGE_FALLING>; }; lsm303dlh@1e { /* @@ -118,14 +119,15 @@ /* Accelerometer */ compatible = "st,lis331dl-accel"; st,drdy-int-pin = <1>; + drive-open-drain; reg = <0x1c>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>, - <19 IRQ_TYPE_EDGE_RISING>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>, + <19 IRQ_TYPE_EDGE_FALLING>; }; ak8974@0f { /* Magnetometer */ @@ -216,7 +218,7 @@ /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pd>; + ste,config = <&gpio_in_pu>; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index b0278f4c486c..ece222d51717 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -18,7 +18,7 @@ / { gpio_keys { button@1 { - gpios = <&tc3589x_gpio 7 0x4>; + gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>; }; }; @@ -68,12 +68,12 @@ // External Micro SD slot sdi0_per1@80126000 { - cd-gpios = <&tc3589x_gpio 3 0x4>; + cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; }; vmmci: regulator-gpio { - gpios = <&tc3589x_gpio 18 0x4>; - enable-gpio = <&tc3589x_gpio 17 0x4>; + gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 149a72e7e37a..45d7af326718 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -20,12 +20,12 @@ soc { // External Micro SD slot sdi0_per1@80126000 { - cd-gpios = <&gpio2 31 0x4>; // 95 + cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; vmmci: regulator-gpio { - gpios = <&gpio0 5 0x4>; - enable-gpio = <&gpio5 9 0x4>; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 4a21c6492dbb..d35aa88791ad 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -57,8 +57,15 @@ }; }; }; + lis3lv02dl { + lis3lv02dl_nhk_mode: lis3lv02dl_nhk { + nhk_cfg1 { + pins = "GPIO82_C10"; // IRQ line + ste,input = <0>; + }; + }; + }; }; - src@101e0000 { /* These chrystal outputs are not used on this board */ disable-sxtalo; @@ -86,6 +93,10 @@ lis3lv02dl@1d { /* Accelerometer */ compatible = "st,lis3lv02dl-accel"; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; // GPIO 82 + pinctrl-0 = <&lis3lv02dl_nhk_mode>; + pinctrl-names = "default"; reg = <0x1d>; }; stmpe0: stmpe2401@43 { diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index e2be53343064..d2d532a9d783 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -748,6 +748,9 @@ clocks = <&uart0clk>, <&pclkuart0>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; + dmas = <&dmac0 14 1>, + <&dmac0 15 1>; + dma-names = "rx", "tx"; }; uart1: uart@101fb000 { @@ -759,6 +762,9 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart1_default_mux>; + dmas = <&dmac1 22 1>, + <&dmac1 23 1>; + dma-names = "rx", "tx"; }; uart2: uart@101f2000 { @@ -769,6 +775,9 @@ clocks = <&uart2clk>, <&pclkuart2>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; + dmas = <&dmac1 30 1>, + <&dmac1 31 1>; + dma-names = "rx", "tx"; }; rng: rng@101b0000 { @@ -813,5 +822,34 @@ pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; }; + + dmac0: dma-controller@10130000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10130000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <15>; + clocks = <&hclkdma0>; + clock-names = "apb_pclk"; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; + dmac1: dma-controller@10150000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10150000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <13>; + clocks = <&hclkdma1>; + clock-names = "apb_pclk"; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 08f82077b64d..36e84efc401c 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -50,35 +50,35 @@ wakeup-source; linux,code = <2>; label = "userpb"; - gpios = <&gpio1 0 0x4>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; }; button@2 { debounce_interval = <50>; wakeup-source; linux,code = <3>; label = "extkb1"; - gpios = <&gpio4 23 0x4>; + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; }; button@3 { debounce_interval = <50>; wakeup-source; linux,code = <4>; label = "extkb2"; - gpios = <&gpio4 24 0x4>; + gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; }; button@4 { debounce_interval = <50>; wakeup-source; linux,code = <5>; label = "extkb3"; - gpios = <&gpio5 1 0x4>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; button@5 { debounce_interval = <50>; wakeup-source; linux,code = <6>; label = "extkb4"; - gpios = <&gpio5 2 0x4>; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; }; }; @@ -88,7 +88,7 @@ pinctrl-0 = <&gpioled_snowball_mode>; used-led { label = "user_led"; - gpios = <&gpio4 14 0x4>; + gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; @@ -155,8 +155,8 @@ vmmci: regulator-gpio { compatible = "regulator-gpio"; - gpios = <&gpio7 4 0x4>; - enable-gpio = <&gpio6 25 0x4>; + gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; @@ -182,8 +182,7 @@ pinctrl-0 = <&sdi0_default_mode>; pinctrl-1 = <&sdi0_sleep_mode>; - cd-gpios = <&gpio6 26 0x4>; // 218 - cd-inverted; + cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218 status = "okay"; }; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 81f81214cdf9..ad8ba10764a3 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -15,6 +15,36 @@ #address-cells = <1>; #size-cells = <1>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gp0_reserved: rproc@40000000 { + compatible = "shared-dma-pool"; + reg = <0x40000000 0x01000000>; + no-map; + }; + + gp1_reserved: rproc@41000000 { + compatible = "shared-dma-pool"; + reg = <0x41000000 0x01000000>; + no-map; + }; + + audio_reserved: rproc@42000000 { + compatible = "shared-dma-pool"; + reg = <0x42000000 0x01000000>; + no-map; + }; + + dmu_reserved: rproc@43000000 { + compatible = "shared-dma-pool"; + reg = <0x43000000 0x01000000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,15 +52,35 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + + /* kHz uV */ + operating-points = <1500000 0 + 1200000 0 + 800000 0 + 500000 0>; + + clocks = <&clk_m_a9>; + clock-names = "cpu"; + clock-latency = <100000>; + cpu0-supply = <&pwm_regulator>; + st,syscfg = <&syscfg_core 0x8e0>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + + /* kHz uV */ + operating-points = <1500000 0 + 1200000 0 + 800000 0 + 500000 0>; }; }; @@ -534,7 +584,7 @@ reg = <0x8788000 0x1000>; interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>; clocks = <&clk_s_d3_flexgen CLK_LPC_1>; - st,lpc-mode = <ST_LPC_MODE_RTC>; + st,lpc-mode = <ST_LPC_MODE_CLKSRC>; }; sata0: sata@9b20000 { @@ -694,5 +744,79 @@ clocks = <&clk_sysin>; status = "okay"; }; + + mailbox0: mailbox@8f00000 { + compatible = "st,stih407-mailbox"; + reg = <0x8f00000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>; + #mbox-cells = <2>; + mbox-name = "a9"; + status = "okay"; + }; + + mailbox1: mailbox@8f01000 { + compatible = "st,stih407-mailbox"; + reg = <0x8f01000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_gp_1"; + status = "okay"; + }; + + mailbox2: mailbox@8f02000 { + compatible = "st,stih407-mailbox"; + reg = <0x8f02000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_gp_0"; + status = "okay"; + }; + + mailbox3: mailbox@8f03000 { + compatible = "st,stih407-mailbox"; + reg = <0x8f03000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_audio_video"; + status = "okay"; + }; + + st231_gp0: remote-processor { + compatible = "st,st231-rproc"; + memory-region = <&gp0_reserved>; + resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x22c>; + }; + + + st231_gp1: remote-processor { + compatible = "st,st231-rproc"; + memory-region = <&gp1_reserved>; + resets = <&softreset STIH407_ST231_GP1_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x220>; + }; + + st231_audio: remote-processor { + compatible = "st,st231-rproc"; + memory-region = <&audio_reserved>; + resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x228>; + }; + + st231_dmu: remote-processor { + compatible = "st,st231-rproc"; + memory-region = <&dmu_reserved>; + resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x224>; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 97570cb7f2fc..c92a1ae33a1e 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -87,6 +87,24 @@ enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -188,6 +206,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts new file mode 100644 index 000000000000..893497e397da --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -0,0 +1,281 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Dserve DSRV9703C"; + compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_dsrv9703c>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <®_motor>; + min-microvolt = <3000000>; + max-microvolt = <3000000>; + }; + + reg_motor: reg_motor { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&motor_pins>; + regulator-name = "vcc-motor"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + }; +}; + +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + /* pull-ups and devices require AXP209 LDO3 */ + status = "failed"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@800 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <800000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + bl_en_pin_dsrv9703c: bl_en_pin@0 { + allwinner,pins = "PH7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + motor_pins: motor_pins@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + touchscreen_pins: touchscreen_pins@0 { + allwinner,pins = "PB13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 2c8f5e6ad905..a03e56fb5dbc 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -96,7 +96,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, - <&dram_gates 25>, <&dram_gates 26>; + <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; }; @@ -184,6 +184,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -208,6 +217,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -232,6 +258,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -477,6 +520,17 @@ clock-output-names = "ir1"; }; + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; @@ -1006,6 +1060,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; timer@01c20c00 { @@ -1034,6 +1095,19 @@ status = "disabled"; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts new file mode 100644 index 000000000000..6546fa02901d --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Difrnce DIT4350"; + compatible = "difrnce,dit4350", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_d709: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 7fbb0b0558a9..6efbba6d40a9 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -123,7 +123,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ @@ -131,27 +131,12 @@ status = "okay"; }; -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; - - mmccard: mmccard@0 { - reg = <0>; - compatible = "mmc-card"; - broken-hpi; - }; -}; - &otg_sram { status = "okay"; }; &pio { - mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { + mmc0_cd_pin_d709: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts index 6fa54b661423..1b11ec95ae53 100644 --- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts +++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts @@ -123,21 +123,6 @@ status = "okay"; }; -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; - - mmccard: mmccard@0 { - reg = <0>; - compatible = "mmc-card"; - broken-hpi; - }; -}; - &otg_sram { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index ad84fe4276c9..081329e2b80b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -109,6 +109,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -124,6 +128,27 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; @@ -132,6 +157,12 @@ }; }; +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; @@ -144,7 +175,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index d910d3a6c41c..263d46dbc7e6 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -61,7 +61,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>, + <&tcon_ch0_clk>, <&dram_gates 26>; status = "disabled"; }; }; @@ -110,8 +111,8 @@ <10>, <13>, <14>, <20>, <21>, <22>, - <28>, <32>, <36>, - <40>, <44>, + <28>, <32>, <34>, + <36>, <40>, <44>, <46>, <51>, <52>; clock-output-names = "ahb_usbotg", "ahb_ehci", @@ -120,8 +121,8 @@ "ahb_mmc2", "ahb_nand", "ahb_sdram", "ahb_spi0", "ahb_spi1", "ahb_spi2", - "ahb_stimer", "ahb_ve", "ahb_lcd", - "ahb_csi", "ahb_de_be", + "ahb_stimer", "ahb_ve", "ahb_tve", + "ahb_lcd", "ahb_csi", "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; @@ -149,6 +150,61 @@ "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; + + dram_gates: clk@01c20100 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-dram-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c20100 0x4>; + clocks = <&pll5 0>; + clock-indices = <0>, + <1>, + <25>, + <26>, + <29>, + <31>; + clock-output-names = "dram_ve", + "dram_csi", + "dram_de_fe", + "dram_de_be", + "dram_ace", + "dram_iep"; + }; + + de_be_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be"; + }; + + de_fe_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe"; + }; + + tcon_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch0-sclk"; + }; + + tcon_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch1-sclk"; + }; }; soc@01c00000 { diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index f6898c6b84d4..a8d8b4582397 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -66,6 +66,10 @@ }; }; +&be0 { + status = "okay"; +}; + &codec { status = "okay"; }; @@ -188,6 +192,14 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + +&tve0 { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi index 0ef865601ac9..c04cf690b858 100644 --- a/arch/arm/boot/dts/sun5i-r8.dtsi +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -51,9 +51,147 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&de_be_clk>, + <&tcon_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; }; + + soc@01c00000 { + tve0: tv-encoder@01c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + }; + }; + }; + }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + status = "disabled"; + + assigned-clocks = <&de_be_clk>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; + }; + + display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; + }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 59a9426e3bd4..0840612b5ed6 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -88,6 +88,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -112,6 +121,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -136,6 +162,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts new file mode 100644 index 000000000000..e182eec6d878 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -0,0 +1,208 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Colorfly E708 Q1 tablet"; + compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&ehci0 { + /* rtl8188etv wifi is connected here */ + status = "okay"; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@1000 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1000000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mma8452_int_e708_q1: mma8452_int_pin@0 { + allwinner,pins = "PA9"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; + vcc-pg-supply = <®_dldo2>; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp221 pmic on the board. + * + * Once we have axp221 power-supply and vbus-usb support we should switch + * to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8da939ab8350..83f39b0362cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -94,6 +94,24 @@ pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -301,6 +319,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 661c21d9bdbd..10d48cbf81ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -65,6 +65,24 @@ default-state = "on"; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -123,3 +141,9 @@ ®_ahci_5v { status = "okay"; }; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts new file mode 100644 index 000000000000..5ea4915f6d75 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -0,0 +1,82 @@ + /* + * Copyright 2015 - Ultimaker B.V. + * Author Olliver Schinagl <oliver@schinagl.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun7i-a20-olinuxino-lime2.dts" + +/ { + model = "Olimex A20-OLinuXino-LIME2-eMMC"; + compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + pinctrl-0 = <&mmc2_pins_nrst>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&pio { + mmc2_pins_nrst: mmc2@0 { + allwinner,pins = "PC16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 0940a788f824..febdf4c72fb0 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -85,8 +85,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&pll5 1>, + <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, + <&dram_gates 5>, <&dram_gates 26>; status = "disabled"; }; }; @@ -186,6 +187,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -210,6 +220,22 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <2>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -235,6 +261,22 @@ "pll6_div_4"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <2>; + clock-output-names = "pll7-2x"; + }; + pll8: clk@01c20040 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -476,6 +518,17 @@ clock-output-names = "ir1"; }; + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + keypad_clk: clk@01c200c4 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -1193,6 +1246,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; timer@01c20c00 { @@ -1226,6 +1286,19 @@ status = "disabled"; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts index 1aeb06c649b9..b2ce284a65a2 100644 --- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -47,15 +47,26 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> / { - model = "Allwinner GT90H Quad Core Tablet (v4)"; - compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33"; + model = "Allwinner GT90H Dual Core Tablet (v4)"; + compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23"; aliases { serial0 = &r_uart; }; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_gt90h>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -106,8 +117,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; - /* FIXME this really is aldo1, correct once we've pmic support */ - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -115,6 +125,13 @@ }; &pio { + bl_en_pin_gt90h: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_in"; @@ -123,12 +140,106 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + &r_uart { pinctrl-names = "default"; pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + /* * FIXME for now we only support host mode and rely on u-boot to have * turned on Vbus which is controlled by the axp223 pmic on the board. @@ -141,5 +252,6 @@ }; &usbphy { + usb1_vbus-supply = <®_dldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts new file mode 100644 index 000000000000..cb5daafcb7c2 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -0,0 +1,243 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Polaroid MID2809PXE04 tablet"; + compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23"; + + aliases { + serial0 = &r_uart; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_mid2809>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin_mid2809: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_mid2809: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts new file mode 100644 index 000000000000..f93f5d1695c4 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi 2"; + compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw2 { + label = "sw2"; + linux,code = <BTN_1>; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; + }; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL3", "PL4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { + allwinner,pins = "PL7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts new file mode 100644 index 000000000000..0adf932fd923 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi One"; + compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts new file mode 100644 index 000000000000..daf50b9a6657 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -0,0 +1,167 @@ +/* + * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi PC"; + compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 79f40c3e6101..b0cb41787e09 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -40,95 +40,56 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +/* The Orange Pi Plus is an extended version of the Orange Pi 2 */ +#include "sun8i-h3-orangepi-2.dts" / { model = "Xunlong Orange Pi Plus"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - - status_led { - label = "orangepi-plus:red:status"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - - pwr_led { - label = "orangepi-plus:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + pinctrl-0 = <&usb3_vbus_pin_a>; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; +}; - r_gpio_keys { - compatible = "gpio-keys"; - input-name = "sw4"; - - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; +&ehci3 { + status = "okay"; +}; - sw4@0 { - label = "sw4"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; }; -&pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; -&r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; +&pio { + usb3_vbus_pin_a: usb3_vbus_pin@0 { + allwinner,pins = "PG11"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - - sw_r_opc: key_pins@0 { - allwinner,pins = "PL03"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; +&usbphy { + usb3_vbus-supply = <®_usb3_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index dadb7f60c062..4a4926b0b0ed 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -269,6 +269,18 @@ "mmc2_sample"; }; + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-h3-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", + "usb_phy2", "usb_phy3", + "usb_ohci0", "usb_ohci1", + "usb_ohci2", "usb_ohci3"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -377,6 +389,107 @@ #size-cells = <0>; }; + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&usb_clk 8>, + <&usb_clk 9>, + <&usb_clk 10>, + <&usb_clk 11>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>, + <&usb_clk 2>, + <&usb_clk 3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 25>, <&bus_gates 29>; + resets = <&ahb_rst 25>, <&ahb_rst 29>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 29>, <&bus_gates 25>, + <&usb_clk 17>; + resets = <&ahb_rst 29>, <&ahb_rst 25>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@01c1c000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 26>, <&bus_gates 30>; + resets = <&ahb_rst 26>, <&ahb_rst 30>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 30>, <&bus_gates 26>, + <&usb_clk 18>; + resets = <&ahb_rst 30>, <&ahb_rst 26>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci3: usb@01c1d000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1d000 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 27>, <&bus_gates 31>; + resets = <&ahb_rst 27>, <&ahb_rst 31>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@01c1d400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1d400 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 31>, <&bus_gates 27>, + <&usb_clk 19>; + resets = <&ahb_rst 31>, <&ahb_rst 27>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-h3-pinctrl"; reg = <0x01c20800 0x400>; @@ -417,6 +530,16 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ahb_rst: reset@01c202c0 { diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index ef665d21d317..dd7eb5f624d9 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -3,11 +3,13 @@ * https://github.com/mansr/linux-tangox */ -#define CPU_CLK 0 -#define SYS_CLK 1 - #include <dt-bindings/interrupt-controller/arm-gic.h> +#define CPU_CLK 0 +#define SYS_CLK 1 +#define USB_CLK 2 +#define SDIO_CLK 3 + / { interrupt-parent = <&gic>; #address-cells = <1>; @@ -70,7 +72,7 @@ clkgen: clkgen@10000 { compatible = "sigma,tango4-clkgen"; - reg = <0x10000 0x40>; + reg = <0x10000 0x100>; clocks = <&xtal>; #clock-cells = <1>; }; @@ -89,6 +91,12 @@ reg-shift = <2>; }; + watchdog@1fd00 { + compatible = "sigma,smp8759-wdt"; + reg = <0x1fd00 8>; + clocks = <&xtal>; + }; + eth0: ethernet@26000 { compatible = "sigma,smp8734-ethernet"; reg = <0x26000 0x800>; diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi index 7ed88ee629fb..d2e65c46bcc7 100644 --- a/arch/arm/boot/dts/tango4-smp8758.dtsi +++ b/arch/arm/boot/dts/tango4-smp8758.dtsi @@ -1,4 +1,4 @@ -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "tango4-common.dtsi" / { cpus { @@ -11,6 +11,9 @@ next-level-cache = <&l2cc>; device_type = "cpu"; reg = <0>; + clocks = <&clkgen CPU_CLK>; + clock-latency = <1>; + operating-points = <1215000 0 607500 0 405000 0 243000 0 135000 0>; }; cpu1: cpu@1 { @@ -28,4 +31,27 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; }; + + soc { + cpu_temp: thermal@920100 { + #thermal-sensor-cells = <0>; + compatible = "sigma,smp8758-thermal"; + reg = <0x920100 12>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <997>; /* milliseconds */ + polling-delay-passive = <499>; /* milliseconds */ + thermal-sensors = <&cpu_temp>; + trips { + cpu_critical { + temperature = <120000>; + hysteresis = <2500>; + type = "critical"; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts index 3e5b9c81a51c..4cab64cb581e 100644 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -1,7 +1,6 @@ /dts-v1/; #include "tango4-smp8758.dtsi" -#include "tango4-common.dtsi" / { model = "Sigma Designs SMP8758 Vantage-1172 Rev E1"; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 8b7aa0dcdc6e..c970bf65c74c 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -18,6 +18,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x80000000 0x40000000>; }; @@ -1164,7 +1168,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; volume_down { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 38acf78d7815..9d868af97b8e 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -1047,7 +1047,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index f91c2c9b2f94..89047edb5c5f 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -292,7 +292,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; volume_down { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index d845bd1448b5..cb9393a53422 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -150,7 +150,7 @@ }; timer@60005000 { - compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, @@ -256,7 +256,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart". */ uarta: serial@70006000 { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 66b4451eb2ca..a99f07ad6312 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -12,7 +12,15 @@ aliases { rtc0 = "/i2c@0,7000d000/pmic@40"; rtc1 = "/rtc@0,7000e000"; + + /* This order keeps the mapping DB9 connector <-> ttyS0 */ serial0 = &uartd; + serial1 = &uarta; + serial2 = &uartb; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory { @@ -1367,6 +1375,28 @@ }; }; + /* + * First high speed UART, exposed on the expansion connector J3A2 + * Pin 41: BR_UART1_TXD + * Pin 44: BR_UART1_RXD + */ + serial@70006000 { + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + /* + * Second high speed UART, exposed on the expansion connector J3A2 + * Pin 65: UART2_RXD + * Pin 68: UART2_TXD + * Pin 71: UART2_CTS_L + * Pin 74: UART2_RTS_L + */ + serial@70006040 { + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; + status = "okay"; + }; + /* DB9 serial port */ serial@0,70006300 { status = "okay"; @@ -1761,7 +1791,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index ec1aa64ded68..5f1fc1410bd0 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -8,6 +8,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -509,7 +513,7 @@ linux,input-type = <5>; linux,code = <KEY_RESERVED>; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; power { @@ -517,7 +521,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <30>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index cfbdf429b45d..0318258dde3e 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -13,6 +13,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -975,7 +979,7 @@ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 68669f791c8b..e4eac1f01e64 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -208,7 +208,7 @@ }; timer@0,60005000 { - compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, @@ -322,7 +322,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ uarta: serial@0,70006000 { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index b926a07b9443..d2e960cbc001 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -13,6 +13,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -655,7 +659,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 1dd7d7bfdfcc..bb56dfe9e10c 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -11,6 +11,10 @@ serial1 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + host1x@50000000 { hdmi@54280000 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 9b87526ab0b7..34c6588e92ef 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -10,6 +10,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + pwm@7000a000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ed7e1009326c..33ed2b23026b 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -14,6 +14,10 @@ serial1 = &uartc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -521,7 +525,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index aea8994b35f2..94b60a710dd8 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -13,6 +13,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -807,7 +811,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid { @@ -816,7 +820,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 13d4e6185275..025e9e8037da 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -10,6 +10,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index d99af4ef9c64..4a035f74043a 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -13,6 +13,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -392,7 +396,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 04c58e9ca490..a28c060a839b 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -13,6 +13,10 @@ serial0 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x40000000>; }; @@ -601,7 +605,7 @@ label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 340d81108df1..073806d07b2b 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -13,6 +13,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -508,7 +512,7 @@ nvidia,repeat-delay-ms = <160>; nvidia,kbc-row-pins = <0 1 2>; nvidia,kbc-col-pins = <16 17>; - nvidia,wakeup-source; + wakeup-source; linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER) MATRIX_KEY(0x01, 0x00, KEY_HOME) MATRIX_KEY(0x01, 0x01, KEY_BACK) diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 33173e1bace9..2207c08e3fa3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -145,7 +145,7 @@ interrupt-parent = <&intc>; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&tegra_car TEGRA20_CLK_TWD>; }; @@ -309,7 +309,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra20-uart" and to enable the APB DMA based serial - * driver, the comptible is "nvidia,tegra20-hsuart". + * driver, the compatible is "nvidia,tegra20-hsuart". */ uarta: serial@70006000 { compatible = "nvidia,tegra20-uart"; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index f2879cfcca62..99a69457dbf5 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -17,6 +17,10 @@ serial3 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + pcie-controller@00003000 { status = "okay"; @@ -196,7 +200,7 @@ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 3dede3934446..1eca3b28ac64 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -12,6 +12,10 @@ serial0 = &uarta; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x80000000 0x7ff00000>; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index bb1ca158273c..4721c1c9c780 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -35,6 +35,10 @@ serial1 = &uartc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x80000000 0x40000000>; }; @@ -626,7 +630,7 @@ interrupts = <2 0>; linux,code = <KEY_POWER>; debounce-interval = <100>; - gpio-key,wakeup; + wakeup-source; }; volume-down { diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 3ff019f47d00..76875c3160fe 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -15,6 +15,10 @@ serial2 = &uartd; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + host1x@50000000 { dc@54200000 { rgb { @@ -142,7 +146,7 @@ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 313e260529a3..5030065cbdfe 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -230,7 +230,7 @@ reg = <0x50040600 0x20>; interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; clocks = <&tegra_car TEGRA30_CLK_TWD>; }; @@ -371,7 +371,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". */ uarta: serial@70006000 { diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 55eb35f068fb..c45f97f37563 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -99,4 +99,10 @@ compatible = "ti,twl6030-pwmled"; #pwm-cells = <2>; }; + + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 24592798a368..f2f3fbe2d517 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -68,6 +68,16 @@ function = "i2c4"; }; + pinctrl_nand: nand_grp { + groups = "nand"; + function = "nand"; + }; + + pinctrl_nand2cs: nand2cs_grp { + groups = "nand", "nand_cs1"; + function = "nand"; + }; + pinctrl_uart0: uart0_grp { groups = "uart0"; function = "uart0"; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 7a556b92e55c..3086efacd00e 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -75,19 +75,19 @@ compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; - v2m_led_gpios: sys_led@08 { + v2m_led_gpios: sys_led { compatible = "arm,vexpress-sysreg,sys_led"; gpio-controller; #gpio-cells = <2>; }; - v2m_mmc_gpios: sys_mci@48 { + v2m_mmc_gpios: sys_mci { compatible = "arm,vexpress-sysreg,sys_mci"; gpio-controller; #gpio-cells = <2>; }; - v2m_flash_gpios: sys_flash@4c { + v2m_flash_gpios: sys_flash { compatible = "arm,vexpress-sysreg,sys_flash"; gpio-controller; #gpio-cells = <2>; @@ -286,7 +286,7 @@ }; }; - v2m_fixed_3v3: fixedregulator@0 { + v2m_fixed_3v3: fixed-regulator-0 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -318,49 +318,49 @@ leds { compatible = "gpio-leds"; - user@1 { + user1 { label = "v2m:green:user1"; gpios = <&v2m_led_gpios 0 0>; linux,default-trigger = "heartbeat"; }; - user@2 { + user2 { label = "v2m:green:user2"; gpios = <&v2m_led_gpios 1 0>; linux,default-trigger = "mmc0"; }; - user@3 { + user3 { label = "v2m:green:user3"; gpios = <&v2m_led_gpios 2 0>; linux,default-trigger = "cpu0"; }; - user@4 { + user4 { label = "v2m:green:user4"; gpios = <&v2m_led_gpios 3 0>; linux,default-trigger = "cpu1"; }; - user@5 { + user5 { label = "v2m:green:user5"; gpios = <&v2m_led_gpios 4 0>; linux,default-trigger = "cpu2"; }; - user@6 { + user6 { label = "v2m:green:user6"; gpios = <&v2m_led_gpios 5 0>; linux,default-trigger = "cpu3"; }; - user@7 { + user7 { label = "v2m:green:user7"; gpios = <&v2m_led_gpios 6 0>; linux,default-trigger = "cpu4"; }; - user@8 { + user8 { label = "v2m:green:user8"; gpios = <&v2m_led_gpios 7 0>; linux,default-trigger = "cpu5"; @@ -371,7 +371,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0 { /* MCC static memory clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -380,7 +380,7 @@ clock-output-names = "v2m:oscclk0"; }; - v2m_oscclk1: osc@1 { + v2m_oscclk1: oscclk1 { /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -389,7 +389,7 @@ clock-output-names = "v2m:oscclk1"; }; - v2m_oscclk2: osc@2 { + v2m_oscclk2: oscclk2 { /* IO FPGA peripheral clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -398,7 +398,7 @@ clock-output-names = "v2m:oscclk2"; }; - volt@0 { + volt-vio { /* Logic level voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -407,34 +407,34 @@ label = "VIO"; }; - temp@0 { + temp-mcc { /* MCC internal operating temperature */ compatible = "arm,vexpress-temp"; arm,vexpress-sysreg,func = <4 0>; label = "MCC"; }; - reset@0 { + reset { compatible = "arm,vexpress-reset"; arm,vexpress-sysreg,func = <5 0>; }; - muxfpga@0 { + muxfpga { compatible = "arm,vexpress-muxfpga"; arm,vexpress-sysreg,func = <7 0>; }; - shutdown@0 { + shutdown { compatible = "arm,vexpress-shutdown"; arm,vexpress-sysreg,func = <8 0>; }; - reboot@0 { + reboot { compatible = "arm,vexpress-reboot"; arm,vexpress-sysreg,func = <9 0>; }; - dvimode@0 { + dvimode { compatible = "arm,vexpress-dvimode"; arm,vexpress-sysreg,func = <11 0>; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 47e4a115adef..c6393d3f1719 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -74,19 +74,19 @@ compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; - v2m_led_gpios: sys_led@08 { + v2m_led_gpios: sys_led { compatible = "arm,vexpress-sysreg,sys_led"; gpio-controller; #gpio-cells = <2>; }; - v2m_mmc_gpios: sys_mci@48 { + v2m_mmc_gpios: sys_mci { compatible = "arm,vexpress-sysreg,sys_mci"; gpio-controller; #gpio-cells = <2>; }; - v2m_flash_gpios: sys_flash@4c { + v2m_flash_gpios: sys_flash { compatible = "arm,vexpress-sysreg,sys_flash"; gpio-controller; #gpio-cells = <2>; @@ -285,7 +285,7 @@ }; }; - v2m_fixed_3v3: fixedregulator@0 { + v2m_fixed_3v3: fixed-regulator-0 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -317,49 +317,49 @@ leds { compatible = "gpio-leds"; - user@1 { + user1 { label = "v2m:green:user1"; gpios = <&v2m_led_gpios 0 0>; linux,default-trigger = "heartbeat"; }; - user@2 { + user2 { label = "v2m:green:user2"; gpios = <&v2m_led_gpios 1 0>; linux,default-trigger = "mmc0"; }; - user@3 { + user3 { label = "v2m:green:user3"; gpios = <&v2m_led_gpios 2 0>; linux,default-trigger = "cpu0"; }; - user@4 { + user4 { label = "v2m:green:user4"; gpios = <&v2m_led_gpios 3 0>; linux,default-trigger = "cpu1"; }; - user@5 { + user5 { label = "v2m:green:user5"; gpios = <&v2m_led_gpios 4 0>; linux,default-trigger = "cpu2"; }; - user@6 { + user6 { label = "v2m:green:user6"; gpios = <&v2m_led_gpios 5 0>; linux,default-trigger = "cpu3"; }; - user@7 { + user7 { label = "v2m:green:user7"; gpios = <&v2m_led_gpios 6 0>; linux,default-trigger = "cpu4"; }; - user@8 { + user8 { label = "v2m:green:user8"; gpios = <&v2m_led_gpios 7 0>; linux,default-trigger = "cpu5"; @@ -370,7 +370,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0 { /* MCC static memory clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -379,7 +379,7 @@ clock-output-names = "v2m:oscclk0"; }; - v2m_oscclk1: osc@1 { + v2m_oscclk1: oscclk1 { /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -388,7 +388,7 @@ clock-output-names = "v2m:oscclk1"; }; - v2m_oscclk2: osc@2 { + v2m_oscclk2: oscclk2 { /* IO FPGA peripheral clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -397,7 +397,7 @@ clock-output-names = "v2m:oscclk2"; }; - volt@0 { + volt-vio { /* Logic level voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -406,34 +406,34 @@ label = "VIO"; }; - temp@0 { + temp-mcc { /* MCC internal operating temperature */ compatible = "arm,vexpress-temp"; arm,vexpress-sysreg,func = <4 0>; label = "MCC"; }; - reset@0 { + reset { compatible = "arm,vexpress-reset"; arm,vexpress-sysreg,func = <5 0>; }; - muxfpga@0 { + muxfpga { compatible = "arm,vexpress-muxfpga"; arm,vexpress-sysreg,func = <7 0>; }; - shutdown@0 { + shutdown { compatible = "arm,vexpress-shutdown"; arm,vexpress-sysreg,func = <8 0>; }; - reboot@0 { + reboot { compatible = "arm,vexpress-reboot"; arm,vexpress-sysreg,func = <9 0>; }; - dvimode@0 { + dvimode { compatible = "arm,vexpress-dvimode"; arm,vexpress-sysreg,func = <11 0>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 9420053acc14..102838fcc588 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -55,14 +55,14 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; - clocks = <&oscclk5>; + clocks = <&hdlcd_clk>; clock-names = "pxlclk"; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; reg = <0 0x2b0a0000 0 0x1000>; - clocks = <&oscclk7>; + clocks = <&sys_pll>; clock-names = "apb_pclk"; }; @@ -71,7 +71,7 @@ status = "disabled"; reg = <0 0x2b060000 0 0x1000>; interrupts = <0 98 4>; - clocks = <&oscclk7>; + clocks = <&sys_pll>; clock-names = "apb_pclk"; }; @@ -92,7 +92,7 @@ reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; - clocks = <&oscclk7>; + clocks = <&sys_pll>; clock-names = "apb_pclk"; }; @@ -104,7 +104,7 @@ <0 89 4>, <0 90 4>, <0 91 4>; - clocks = <&oscclk7>; + clocks = <&sys_pll>; clock-names = "apb_pclk"; }; @@ -126,7 +126,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0 { /* CPU PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -135,7 +135,7 @@ clock-output-names = "oscclk0"; }; - osc@4 { + oscclk4 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -144,7 +144,7 @@ clock-output-names = "oscclk4"; }; - oscclk5: osc@5 { + hdlcd_clk: oscclk5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -153,7 +153,7 @@ clock-output-names = "oscclk5"; }; - smbclk: osc@6 { + smbclk: oscclk6 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -162,7 +162,7 @@ clock-output-names = "oscclk6"; }; - oscclk7: osc@7 { + sys_pll: oscclk7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -171,7 +171,7 @@ clock-output-names = "oscclk7"; }; - osc@8 { + oscclk8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -180,7 +180,7 @@ clock-output-names = "oscclk8"; }; - volt@0 { + volt-cores { /* CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -191,28 +191,28 @@ label = "Cores"; }; - amp@0 { + amp-cores { /* Total current for the two cores */ compatible = "arm,vexpress-amp"; arm,vexpress-sysreg,func = <3 0>; label = "Cores"; }; - temp@0 { + temp-dcc { /* DCC internal temperature */ compatible = "arm,vexpress-temp"; arm,vexpress-sysreg,func = <4 0>; label = "DCC"; }; - power@0 { + power-cores { /* Total power */ compatible = "arm,vexpress-power"; arm,vexpress-sysreg,func = <12 0>; label = "Cores"; }; - energy@0 { + energy { /* Total energy */ compatible = "arm,vexpress-energy"; arm,vexpress-sysreg,func = <13 0>; @@ -220,7 +220,7 @@ }; }; - smb { + smb@08000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -280,4 +280,17 @@ /include/ "vexpress-v2m-rs1.dtsi" }; + + site2: hsb@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x40000000 0x3fef0000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 3>; + interrupt-map = <0 0 &gic 0 36 4>, + <0 1 &gic 0 37 4>, + <0 2 &gic 0 38 4>, + <0 3 &gic 0 39 4>; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 17f63f7dfd9e..0205c97efdef 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -109,7 +109,7 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; - clocks = <&oscclk5>; + clocks = <&hdlcd_clk>; clock-names = "pxlclk"; }; @@ -227,7 +227,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0 { /* A15 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -236,7 +236,7 @@ clock-output-names = "oscclk0"; }; - osc@1 { + oscclk1 { /* A15 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -245,7 +245,7 @@ clock-output-names = "oscclk1"; }; - osc@2 { + oscclk2 { /* A7 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -254,7 +254,7 @@ clock-output-names = "oscclk2"; }; - osc@3 { + oscclk3 { /* A7 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -263,7 +263,7 @@ clock-output-names = "oscclk3"; }; - osc@4 { + oscclk4 { /* External AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -272,7 +272,7 @@ clock-output-names = "oscclk4"; }; - oscclk5: osc@5 { + hdlcd_clk: oscclk5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -281,7 +281,7 @@ clock-output-names = "oscclk5"; }; - smbclk: osc@6 { + smbclk: oscclk6 { /* Static memory controller clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -290,7 +290,7 @@ clock-output-names = "oscclk6"; }; - osc@7 { + oscclk7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -299,7 +299,7 @@ clock-output-names = "oscclk7"; }; - osc@8 { + oscclk8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -308,7 +308,7 @@ clock-output-names = "oscclk8"; }; - volt@0 { + volt-a15 { /* A15 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -319,7 +319,7 @@ label = "A15 Vcore"; }; - volt@1 { + volt-a7 { /* A7 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; @@ -330,49 +330,49 @@ label = "A7 Vcore"; }; - amp@0 { + amp-a15 { /* Total current for the two A15 cores */ compatible = "arm,vexpress-amp"; arm,vexpress-sysreg,func = <3 0>; label = "A15 Icore"; }; - amp@1 { + amp-a7 { /* Total current for the three A7 cores */ compatible = "arm,vexpress-amp"; arm,vexpress-sysreg,func = <3 1>; label = "A7 Icore"; }; - temp@0 { + temp-dcc { /* DCC internal temperature */ compatible = "arm,vexpress-temp"; arm,vexpress-sysreg,func = <4 0>; label = "DCC"; }; - power@0 { + power-a15 { /* Total power for the two A15 cores */ compatible = "arm,vexpress-power"; arm,vexpress-sysreg,func = <12 0>; label = "A15 Pcore"; }; - power@1 { + power-a7 { /* Total power for the three A7 cores */ compatible = "arm,vexpress-power"; arm,vexpress-sysreg,func = <12 1>; label = "A7 Pcore"; }; - energy@0 { + energy-a15 { /* Total energy for the two A15 cores */ compatible = "arm,vexpress-energy"; arm,vexpress-sysreg,func = <13 0>, <13 1>; label = "A15 Jcore"; }; - energy@2 { + energy-a7 { /* Total energy for the three A7 cores */ compatible = "arm,vexpress-energy"; arm,vexpress-sysreg,func = <13 2>, <13 3>; @@ -387,7 +387,7 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; port { - etb_in_port: endpoint@0 { + etb_in_port: endpoint { slave-mode; remote-endpoint = <&replicator_out_port0>; }; @@ -401,7 +401,7 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; port { - tpiu_in_port: endpoint@0 { + tpiu_in_port: endpoint { slave-mode; remote-endpoint = <&replicator_out_port1>; }; @@ -578,7 +578,7 @@ }; }; - smb { + smb@08000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -638,4 +638,17 @@ /include/ "vexpress-v2m-rs1.dtsi" }; + + site2: hsb@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x40000000 0x3fef0000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 3>; + interrupt-map = <0 0 &gic 0 36 4>, + <0 1 &gic 0 37 4>, + <0 2 &gic 0 38 4>, + <0 3 &gic 0 39 4>; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index d2709b73316b..1acecaf4b13d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -57,14 +57,14 @@ compatible = "arm,hdlcd"; reg = <0x2a110000 0x1000>; interrupts = <0 85 4>; - clocks = <&oscclk3>; + clocks = <&hdlcd_clk>; clock-names = "pxlclk"; }; memory-controller@2a150000 { compatible = "arm,pl341", "arm,primecell"; reg = <0x2a150000 0x1000>; - clocks = <&oscclk1>; + clocks = <&axi_clk>; clock-names = "apb_pclk"; }; @@ -73,7 +73,7 @@ reg = <0x2a190000 0x1000>; interrupts = <0 86 4>, <0 87 4>; - clocks = <&oscclk1>; + clocks = <&axi_clk>; clock-names = "apb_pclk"; }; @@ -93,7 +93,7 @@ "arm,cortex-a9-global-timer"; reg = <0x2c000200 0x20>; interrupts = <1 11 0x304>; - clocks = <&oscclk0>; + clocks = <&cpu_clk>; }; watchdog@2c000620 { @@ -128,7 +128,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0: osc@0 { + cpu_clk: oscclk0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -137,7 +137,7 @@ clock-output-names = "oscclk0"; }; - oscclk1: osc@1 { + axi_clk: oscclk1 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -146,7 +146,7 @@ clock-output-names = "oscclk1"; }; - osc@2 { + oscclk2 { /* DDR2 */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -155,7 +155,7 @@ clock-output-names = "oscclk2"; }; - oscclk3: osc@3 { + hdlcd_clk: oscclk3 { /* HDLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -164,7 +164,7 @@ clock-output-names = "oscclk3"; }; - osc@4 { + oscclk4 { /* Test chip gate configuration */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -173,7 +173,7 @@ clock-output-names = "oscclk4"; }; - smbclk: osc@5 { + smbclk: oscclk5 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -182,7 +182,7 @@ clock-output-names = "oscclk5"; }; - temp@0 { + temp-dcc { /* DCC internal operating temperature */ compatible = "arm,vexpress-temp"; arm,vexpress-sysreg,func = <4 0>; @@ -190,7 +190,7 @@ }; }; - smb { + smb@08000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -250,4 +250,17 @@ /include/ "vexpress-v2m-rs1.dtsi" }; + + site2: hsb@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x40000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 3>; + interrupt-map = <0 0 &gic 0 36 4>, + <0 1 &gic 0 37 4>, + <0 2 &gic 0 38 4>, + <0 3 &gic 0 39 4>; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index d949facba376..b608a03ee02f 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -190,7 +190,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0: extsaxiclk { /* ACLK clock to the AXI master port on the test chip */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -199,7 +199,7 @@ clock-output-names = "extsaxiclk"; }; - oscclk1: osc@1 { + oscclk1: clcdclk { /* Reference clock for the CLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -208,7 +208,7 @@ clock-output-names = "clcdclk"; }; - smbclk: oscclk2: osc@2 { + smbclk: oscclk2: tcrefclk { /* Reference clock for the test chip internal PLLs */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -217,7 +217,7 @@ clock-output-names = "tcrefclk"; }; - volt@0 { + volt-vd10 { /* Test Chip internal logic voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -226,7 +226,7 @@ label = "VD10"; }; - volt@1 { + volt-vd10-s2 { /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; @@ -235,7 +235,7 @@ label = "VD10_S2"; }; - volt@2 { + volt-vd10-s3 { /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 2>; @@ -244,7 +244,7 @@ label = "VD10_S3"; }; - volt@3 { + volt-vcc1v8 { /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 3>; @@ -253,7 +253,7 @@ label = "VCC1V8"; }; - volt@4 { + volt-ddr2vtt { /* DDR2 SDRAM VTT termination voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 4>; @@ -262,7 +262,7 @@ label = "DDR2VTT"; }; - volt@5 { + volt-vcc3v3 { /* Local board supply for miscellaneous logic external to the Test Chip */ arm,vexpress-sysreg,func = <2 5>; compatible = "arm,vexpress-volt"; @@ -271,28 +271,28 @@ label = "VCC3V3"; }; - amp@0 { + amp-vd10-s2 { /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ compatible = "arm,vexpress-amp"; arm,vexpress-sysreg,func = <3 0>; label = "VD10_S2"; }; - amp@1 { + amp-vd10-s3 { /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ compatible = "arm,vexpress-amp"; arm,vexpress-sysreg,func = <3 1>; label = "VD10_S3"; }; - power@0 { + power-vd10-s2 { /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ compatible = "arm,vexpress-power"; arm,vexpress-sysreg,func = <12 0>; label = "PVD10_S2"; }; - power@1 { + power-vd10-s3 { /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ compatible = "arm,vexpress-power"; arm,vexpress-sysreg,func = <12 1>; @@ -300,7 +300,7 @@ }; }; - smb { + smb@04000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -359,4 +359,17 @@ /include/ "vexpress-v2m.dtsi" }; + + site2: hsb@e0000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe0000000 0x20000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 3>; + interrupt-map = <0 0 &gic 0 36 4>, + <0 1 &gic 0 37 4>, + <0 2 &gic 0 38 4>, + <0 3 &gic 0 39 4>; + }; }; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index fda7f28101e1..226a86ffd3c9 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -40,6 +40,11 @@ */ / { + aliases { + ethernet0 = &fec1; + ethernet1 = &fec0; + }; + bl: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; @@ -125,8 +130,6 @@ }; &nfc { - assigned-clocks = <&clks VF610_CLK_NFC>; - assigned-clock-rates = <33000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nfc>; status = "okay"; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 3fe1f48c2aec..1a8a0efa19a6 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -69,6 +69,11 @@ }; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; +}; + &iomuxc { vf610-colibri { pinctrl_touchctrl_idle: touchctrl_idle { diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 9d372720ad3f..a3824e61bd72 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -81,6 +81,7 @@ compatible = "arm,cortex-a5-pmu"; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a5_cpu>; + reg = <0x40089000 0x1000>; }; }; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index ab4a29f95593..9ec9e337f5a8 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -50,3 +50,8 @@ reg = <0x80000000 0x10000000>; }; }; + +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <50000000>; +}; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts new file mode 100644 index 000000000000..6c60b7f91104 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -0,0 +1,734 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 Development Board, Rev B"; + compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH + &gpio0 9 GPIO_ACTIVE_HIGH + &gpio0 24 GPIO_ACTIVE_HIGH + &gpio0 25 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio_mux_8: mdio@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + dsa { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + dsa,ethernet = <&fec1>; + dsa,mii-bus = <&mdio_mux_1>; + + /* 6352 - Primary - 7 ports */ + switch0: switch@0-0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00 0>; + eeprom-length = <512>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + switch0port5: port@5 { + reg = <5>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port6 + &switch2port9>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + }; + + /* 6352 - Secondary - 7 ports */ + switch1: switch@0-1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00 1>; + eeprom-length = <512>; + mii-bus = <&mdio_mux_2>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan5"; + }; + + switch1port5: port@5 { + reg = <5>; + label = "dsa"; + link = <&switch2port9>; + phy-mode = "rgmii-txid"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch1port6: port@6 { + reg = <6>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + /* 6185 - 10 ports */ + switch2: switch@0-2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00 2>; + mii-bus = <&mdio_mux_4>; + + port@0 { + reg = <0>; + label = "lan6"; + }; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan8"; + }; + + port@3 { + reg = <3>; + label = "optical3"; + + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 2 + GPIO_ACTIVE_HIGH>; + }; + }; + + port@4 { + reg = <4>; + label = "optical4"; + + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 3 + GPIO_ACTIVE_HIGH>; + }; + }; + + switch2port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port5 + &switch0port5>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_usb_vbus>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 6 0>; + }; + + spi0 { + compatible = "spi-gpio"; + pinctrl-0 = <&pinctrl_gpio_spi0>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH + &gpio1 8 GPIO_ACTIVE_HIGH>; + num-chipselects = <2>; + + m25p128@0 { + compatible = "m25p128", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + at93c46d@1 { + compatible = "atmel,at93c46d"; + pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>; + pinctrl-names = "default"; + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <500000>; + spi-cs-high; + data-size = <16>; + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio5: pca9554@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + }; + + gpio6: pca9554@22 { + compatible = "nxp,pca9554"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9554_22>; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-0 = <&pinctrl_i2c_mux_reset>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sfp1: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sfp2: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sfp3: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + sfp4: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + vbus-supply = <&usb0_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0x00a1 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2grp { + fsl,pins = < + VF610_PAD_PTD31__DSPI2_CS1 0x1182 + VF610_PAD_PTD30__DSPI2_CS0 0x1182 + VF610_PAD_PTD29__DSPI2_SIN 0x1181 + VF610_PAD_PTD28__DSPI2_SOUT 0x1182 + VF610_PAD_PTD27__DSPI2_SCK 0x1182 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { + fsl,pins = < + VF610_PAD_PTE27__GPIO_132 0x33e2 + >; + }; + + pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + fsl,pins = < + VF610_PAD_PTB22__GPIO_44 0x33e2 + VF610_PAD_PTB21__GPIO_43 0x33e2 + VF610_PAD_PTB20__GPIO_42 0x33e1 + VF610_PAD_PTB19__GPIO_41 0x33e2 + VF610_PAD_PTB18__GPIO_40 0x33e2 + >; + }; + + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + fsl,pins = < + VF610_PAD_PTE14__GPIO_119 0x31c2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + VF610_PAD_PTA30__I2C3_SCL 0x37ff + VF610_PAD_PTA31__I2C3_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD20__GPIO_74 0x31c2 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x31c2 + VF610_PAD_PTA19__GPIO_9 0x31c2 + VF610_PAD_PTB2__GPIO_24 0x31c2 + VF610_PAD_PTB3__GPIO_25 0x31c2 + >; + }; + + pinctrl_pca9554_22: pinctrl-pca95540-22 { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_usb_vbus: pinctrl-usb-vbus { + fsl,pins = < + VF610_PAD_PTA16__GPIO_6 0x31c2 + >; + }; + + pinctrl_usb0_host: usb0-host-grp { + fsl,pins = < + VF610_PAD_PTD6__GPIO_85 0x0062 + >; + }; +}; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 5c0975451d4e..04ef54d45a91 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -95,6 +95,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; + reg = <0x40000000 0x00070000>; ranges; mscm_cpucfg: cpucfg@40001000 { @@ -481,6 +482,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; + reg = <0x40080000 0x0007f000>; ranges; edma1: dma-controller@40098000 { diff --git a/arch/arm/boot/dts/wd-mbwe.dts b/arch/arm/boot/dts/wd-mbwe.dts new file mode 100644 index 000000000000..ac3250ae8fc4 --- /dev/null +++ b/arch/arm/boot/dts/wd-mbwe.dts @@ -0,0 +1,112 @@ +/* + * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +#include "ox810se.dtsi" + +/ { + model = "Western Digital My Book World Edition"; + + compatible = "wd,mbwe", "oxsemi,ox810se"; + + chosen { + bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x48000000 0x8000000>; + }; + + aliases { + serial1 = &uart1; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + + recovery { + label = "recovery"; + gpios = <&gpio0 4 1>; + linux,code = <0xab>; + }; + }; + + leds { + compatible = "gpio-leds"; + + a0 { + label = "activity0"; + gpios = <&gpio0 25 0>; + default-state = "keep"; + }; + + a1 { + label = "activity1"; + gpios = <&gpio0 26 0>; + default-state = "keep"; + }; + + a2 { + label = "activity2"; + gpios = <&gpio0 5 0>; + default-state = "keep"; + }; + + a3 { + label = "activity3"; + gpios = <&gpio0 6 0>; + default-state = "keep"; + }; + + a4 { + label = "activity4"; + gpios = <&gpio0 7 0>; + default-state = "keep"; + }; + + a5 { + label = "activity5"; + gpios = <&gpio1 2 0>; + default-state = "keep"; + }; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + gpios = <&gpio0 3 0 /* sda */ + &gpio0 2 0 /* scl */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + rtc0: rtc@48 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; +}; + +&uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index fac6d43e7fdb..754f478110b4 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -20,6 +20,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), + OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL), OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL), OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL), @@ -27,6 +28,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL), OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL), OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da830-spi", 0x01c41000, "spi_davinci.0", NULL), OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL), OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL), diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 706d2426024f..eb0ce7b09617 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -115,6 +115,14 @@ clock-frequency = <0>; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + status = "disabled"; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -514,6 +522,36 @@ #size-cells = <0>; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a7795", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&cpg>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a7795", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&cpg>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif", @@ -943,7 +981,7 @@ }; xhci0: usb@ee000000 { - compatible = "renesas,xhci-r8a7795"; + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 328>; @@ -952,7 +990,7 @@ }; xhci1: usb@ee0400000 { - compatible = "renesas,xhci-r8a7795"; + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; reg = <0 0xee040000 0 0xc00>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 327>; |