diff options
Diffstat (limited to 'drivers/accel/ivpu/vpu_boot_api.h')
-rw-r--r-- | drivers/accel/ivpu/vpu_boot_api.h | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/drivers/accel/ivpu/vpu_boot_api.h b/drivers/accel/ivpu/vpu_boot_api.h new file mode 100644 index 000000000000..6b71be92ba65 --- /dev/null +++ b/drivers/accel/ivpu/vpu_boot_api.h @@ -0,0 +1,349 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright (C) 2020-2023 Intel Corporation + */ + +#ifndef VPU_BOOT_API_H +#define VPU_BOOT_API_H + +/* + * =========== FW API version information beginning ================ + * The bellow values will be used to construct the version info this way: + * fw_bin_header->api_version[VPU_BOOT_API_VER_ID] = (VPU_BOOT_API_VER_MAJOR << 16) | + * VPU_BOOT_API_VER_MINOR; + * VPU_BOOT_API_VER_PATCH will be ignored. KMD and compatibility is not affected if this changes. + */ + +/* + * Major version changes that break backward compatibility. + * Major version must start from 1 and can only be incremented. + */ +#define VPU_BOOT_API_VER_MAJOR 3 + +/* + * Minor version changes when API backward compatibility is preserved. + * Resets to 0 if Major version is incremented. + */ +#define VPU_BOOT_API_VER_MINOR 12 + +/* + * API header changed (field names, documentation, formatting) but API itself has not been changed + */ +#define VPU_BOOT_API_VER_PATCH 2 + +/* + * Index in the API version table + * Must be unique for each API + */ +#define VPU_BOOT_API_VER_INDEX 0 +/* ------------ FW API version information end ---------------------*/ + +#pragma pack(push, 1) + +/* + * Firmware image header format + */ +#define VPU_FW_HEADER_SIZE 4096 +#define VPU_FW_HEADER_VERSION 0x1 +#define VPU_FW_VERSION_SIZE 32 +#define VPU_FW_API_VER_NUM 16 + +struct vpu_firmware_header { + u32 header_version; + u32 image_format; + u64 image_load_address; + u32 image_size; + u64 entry_point; + u8 vpu_version[VPU_FW_VERSION_SIZE]; + u32 compression_type; + u64 firmware_version_load_address; + u32 firmware_version_size; + u64 boot_params_load_address; + u32 api_version[VPU_FW_API_VER_NUM]; + /* Size of memory require for firmware execution */ + u32 runtime_size; + u32 shave_nn_fw_size; +}; + +/* + * Firmware boot parameters format + */ + +#define VPU_BOOT_PLL_COUNT 3 +#define VPU_BOOT_PLL_OUT_COUNT 4 + +/** Values for boot_type field */ +#define VPU_BOOT_TYPE_COLDBOOT 0 +#define VPU_BOOT_TYPE_WARMBOOT 1 + +/** Value for magic filed */ +#define VPU_BOOT_PARAMS_MAGIC 0x10000 + +/** VPU scheduling mode. By default, OS scheduling is used. */ +#define VPU_SCHEDULING_MODE_OS 0 +#define VPU_SCHEDULING_MODE_HW 1 + +enum VPU_BOOT_L2_CACHE_CFG_TYPE { + VPU_BOOT_L2_CACHE_CFG_UPA = 0, + VPU_BOOT_L2_CACHE_CFG_NN = 1, + VPU_BOOT_L2_CACHE_CFG_NUM = 2 +}; + +/** + * Logging destinations. + * + * Logging output can be directed to different logging destinations. This enum + * defines the list of logging destinations supported by the VPU firmware (NOTE: + * a specific VPU FW binary may support only a subset of such output + * destinations, depending on the target platform and compile options). + */ +enum vpu_trace_destination { + VPU_TRACE_DESTINATION_PIPEPRINT = 0x1, + VPU_TRACE_DESTINATION_VERBOSE_TRACING = 0x2, + VPU_TRACE_DESTINATION_NORTH_PEAK = 0x4, +}; + +/* + * Processor bit shifts (for loggable HW components). + */ +#define VPU_TRACE_PROC_BIT_ARM 0 +#define VPU_TRACE_PROC_BIT_LRT 1 +#define VPU_TRACE_PROC_BIT_LNN 2 +#define VPU_TRACE_PROC_BIT_SHV_0 3 +#define VPU_TRACE_PROC_BIT_SHV_1 4 +#define VPU_TRACE_PROC_BIT_SHV_2 5 +#define VPU_TRACE_PROC_BIT_SHV_3 6 +#define VPU_TRACE_PROC_BIT_SHV_4 7 +#define VPU_TRACE_PROC_BIT_SHV_5 8 +#define VPU_TRACE_PROC_BIT_SHV_6 9 +#define VPU_TRACE_PROC_BIT_SHV_7 10 +#define VPU_TRACE_PROC_BIT_SHV_8 11 +#define VPU_TRACE_PROC_BIT_SHV_9 12 +#define VPU_TRACE_PROC_BIT_SHV_10 13 +#define VPU_TRACE_PROC_BIT_SHV_11 14 +#define VPU_TRACE_PROC_BIT_SHV_12 15 +#define VPU_TRACE_PROC_BIT_SHV_13 16 +#define VPU_TRACE_PROC_BIT_SHV_14 17 +#define VPU_TRACE_PROC_BIT_SHV_15 18 +#define VPU_TRACE_PROC_BIT_ACT_SHV_0 19 +#define VPU_TRACE_PROC_BIT_ACT_SHV_1 20 +#define VPU_TRACE_PROC_BIT_ACT_SHV_2 21 +#define VPU_TRACE_PROC_BIT_ACT_SHV_3 22 +#define VPU_TRACE_PROC_NO_OF_HW_DEVS 23 + +/* KMB HW component IDs are sequential, so define first and last IDs. */ +#define VPU_TRACE_PROC_BIT_KMB_FIRST VPU_TRACE_PROC_BIT_LRT +#define VPU_TRACE_PROC_BIT_KMB_LAST VPU_TRACE_PROC_BIT_SHV_15 + +struct vpu_boot_l2_cache_config { + u8 use; + u8 cfg; +}; + +struct vpu_warm_boot_section { + u32 src; + u32 dst; + u32 size; + u32 core_id; + u32 is_clear_op; +}; + +struct vpu_boot_params { + u32 magic; + u32 vpu_id; + u32 vpu_count; + u32 pad0[5]; + /* Clock frequencies: 0x20 - 0xFF */ + u32 frequency; + u32 pll[VPU_BOOT_PLL_COUNT][VPU_BOOT_PLL_OUT_COUNT]; + u32 perf_clk_frequency; + u32 pad1[42]; + /* Memory regions: 0x100 - 0x1FF */ + u64 ipc_header_area_start; + u32 ipc_header_area_size; + u64 shared_region_base; + u32 shared_region_size; + u64 ipc_payload_area_start; + u32 ipc_payload_area_size; + u64 global_aliased_pio_base; + u32 global_aliased_pio_size; + u32 autoconfig; + struct vpu_boot_l2_cache_config cache_defaults[VPU_BOOT_L2_CACHE_CFG_NUM]; + u64 global_memory_allocator_base; + u32 global_memory_allocator_size; + /** + * ShaveNN FW section VPU base address + * On VPU2.7 HW this address must be within 2GB range starting from L2C_PAGE_TABLE base + */ + u64 shave_nn_fw_base; + u64 save_restore_ret_address; /* stores the address of FW's restore entry point */ + u32 pad2[43]; + /* IRQ re-direct numbers: 0x200 - 0x2FF */ + s32 watchdog_irq_mss; + s32 watchdog_irq_nce; + /* ARM -> VPU doorbell interrupt. ARM is notifying VPU of async command or compute job. */ + u32 host_to_vpu_irq; + /* VPU -> ARM job done interrupt. VPU is notifying ARM of compute job completion. */ + u32 job_done_irq; + /* VPU -> ARM IRQ line to use to request MMU update. */ + u32 mmu_update_request_irq; + /* ARM -> VPU IRQ line to use to notify of MMU update completion. */ + u32 mmu_update_done_irq; + /* ARM -> VPU IRQ line to use to request power level change. */ + u32 set_power_level_irq; + /* VPU -> ARM IRQ line to use to notify of power level change completion. */ + u32 set_power_level_done_irq; + /* VPU -> ARM IRQ line to use to notify of VPU idle state change */ + u32 set_vpu_idle_update_irq; + /* VPU -> ARM IRQ line to use to request counter reset. */ + u32 metric_query_event_irq; + /* ARM -> VPU IRQ line to use to notify of counter reset completion. */ + u32 metric_query_event_done_irq; + /* VPU -> ARM IRQ line to use to notify of preemption completion. */ + u32 preemption_done_irq; + /* Padding. */ + u32 pad3[52]; + /* Silicon information: 0x300 - 0x3FF */ + u32 host_version_id; + u32 si_stepping; + u64 device_id; + u64 feature_exclusion; + u64 sku; + /** PLL ratio for minimum clock frequency */ + u32 min_freq_pll_ratio; + /** PLL ratio for maximum clock frequency */ + u32 max_freq_pll_ratio; + /** + * Initial log level threshold (messages with log level severity less than + * the threshold will not be logged); applies to every enabled logging + * destination and loggable HW component. See 'mvLog_t' enum for acceptable + * values. + */ + u32 default_trace_level; + u32 boot_type; + u64 punit_telemetry_sram_base; + u64 punit_telemetry_sram_size; + u32 vpu_telemetry_enable; + u64 crit_tracing_buff_addr; + u32 crit_tracing_buff_size; + u64 verbose_tracing_buff_addr; + u32 verbose_tracing_buff_size; + u64 verbose_tracing_sw_component_mask; /* TO BE REMOVED */ + /** + * Mask of destinations to which logging messages are delivered; bitwise OR + * of values defined in vpu_trace_destination enum. + */ + u32 trace_destination_mask; + /** + * Mask of hardware components for which logging is enabled; bitwise OR of + * bits defined by the VPU_TRACE_PROC_BIT_* macros. + */ + u64 trace_hw_component_mask; + /** Mask of trace message formats supported by the driver */ + u64 tracing_buff_message_format_mask; + u64 trace_reserved_1[2]; + /** + * Period at which the VPU reads the temp sensor values into MMIO, on + * platforms where that is necessary (in ms). 0 to disable reads. + */ + u32 temp_sensor_period_ms; + /** PLL ratio for efficient clock frequency */ + u32 pn_freq_pll_ratio; + u32 pad4[28]; + /* Warm boot information: 0x400 - 0x43F */ + u32 warm_boot_sections_count; + u32 warm_boot_start_address_reference; + u32 warm_boot_section_info_address_offset; + u32 pad5[13]; + /* Power States transitions timestamps: 0x440 - 0x46F*/ + struct { + /* VPU_IDLE -> VPU_ACTIVE transition initiated timestamp */ + u64 vpu_active_state_requested; + /* VPU_IDLE -> VPU_ACTIVE transition completed timestamp */ + u64 vpu_active_state_achieved; + /* VPU_ACTIVE -> VPU_IDLE transition initiated timestamp */ + u64 vpu_idle_state_requested; + /* VPU_ACTIVE -> VPU_IDLE transition completed timestamp */ + u64 vpu_idle_state_achieved; + /* VPU_IDLE -> VPU_STANDBY transition initiated timestamp */ + u64 vpu_standby_state_requested; + /* VPU_IDLE -> VPU_STANDBY transition completed timestamp */ + u64 vpu_standby_state_achieved; + } power_states_timestamps; + /* VPU scheduling mode. Values defined by VPU_SCHEDULING_MODE_* macros. */ + u32 vpu_scheduling_mode; + /* Present call period in milliseconds. */ + u32 vpu_focus_present_timer_ms; + /* Unused/reserved: 0x478 - 0xFFF */ + u32 pad6[738]; +}; + +/* + * Magic numbers set between host and vpu to detect corruptio of tracing init + */ + +#define VPU_TRACING_BUFFER_CANARY (0xCAFECAFE) + +/* Tracing buffer message format definitions */ +#define VPU_TRACING_FORMAT_STRING 0 +#define VPU_TRACING_FORMAT_MIPI 2 +/* + * Header of the tracing buffer. + * The below defined header will be stored at the beginning of + * each allocated tracing buffer, followed by a series of 256b + * of ASCII trace message entries. + */ +struct vpu_tracing_buffer_header { + /** + * Magic number set by host to detect corruption + * @see VPU_TRACING_BUFFER_CANARY + */ + u32 host_canary_start; + /* offset from start of buffer for trace entries */ + u32 read_index; + u32 pad_to_cache_line_size_0[14]; + /* End of first cache line */ + + /** + * Magic number set by host to detect corruption + * @see VPU_TRACING_BUFFER_CANARY + */ + u32 vpu_canary_start; + /* offset from start of buffer from write start */ + u32 write_index; + /* counter for buffer wrapping */ + u32 wrap_count; + /* legacy field - do not use */ + u32 reserved_0; + /** + * Size of the log buffer include this header (@header_size) and space + * reserved for all messages. If @alignment` is greater that 0 the @Size + * must be multiple of @Alignment. + */ + u32 size; + /* Header version */ + u16 header_version; + /* Header size */ + u16 header_size; + /* + * Format of the messages in the trace buffer + * 0 - null terminated string + * 1 - size + null terminated string + * 2 - MIPI-SysT encoding + */ + u32 format; + /* + * Message alignment + * 0 - messages are place 1 after another + * n - every message starts and multiple on offset + */ + u32 alignment; /* 64, 128, 256 */ + /* Name of the logging entity, i.e "LRT", "LNN", "SHV0", etc */ + char name[16]; + u32 pad_to_cache_line_size_1[4]; + /* End of second cache line */ +}; + +#pragma pack(pop) + +#endif |