diff options
Diffstat (limited to 'drivers/acpi/acpica/exconvrt.c')
| -rw-r--r-- | drivers/acpi/acpica/exconvrt.c | 692 |
1 files changed, 692 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c new file mode 100644 index 000000000000..caeead439e8c --- /dev/null +++ b/drivers/acpi/acpica/exconvrt.c @@ -0,0 +1,692 @@ +/****************************************************************************** + * + * Module Name: exconvrt - Object conversion routines + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include <acpi/accommon.h> +#include <acpi/acinterp.h> +#include <acpi/amlcode.h> + +#define _COMPONENT ACPI_EXECUTER +ACPI_MODULE_NAME("exconvrt") + +/* Local prototypes */ +static u32 +acpi_ex_convert_to_ascii(acpi_integer integer, + u16 base, u8 * string, u8 max_length); + +/******************************************************************************* + * + * FUNCTION: acpi_ex_convert_to_integer + * + * PARAMETERS: obj_desc - Object to be converted. Must be an + * Integer, Buffer, or String + * result_desc - Where the new Integer object is returned + * Flags - Used for string conversion + * + * RETURN: Status + * + * DESCRIPTION: Convert an ACPI Object to an integer. + * + ******************************************************************************/ + +acpi_status +acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, + union acpi_operand_object **result_desc, u32 flags) +{ + union acpi_operand_object *return_desc; + u8 *pointer; + acpi_integer result; + u32 i; + u32 count; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc); + + switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + case ACPI_TYPE_INTEGER: + + /* No conversion necessary */ + + *result_desc = obj_desc; + return_ACPI_STATUS(AE_OK); + + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + + /* Note: Takes advantage of common buffer/string fields */ + + pointer = obj_desc->buffer.pointer; + count = obj_desc->buffer.length; + break; + + default: + return_ACPI_STATUS(AE_TYPE); + } + + /* + * Convert the buffer/string to an integer. Note that both buffers and + * strings are treated as raw data - we don't convert ascii to hex for + * strings. + * + * There are two terminating conditions for the loop: + * 1) The size of an integer has been reached, or + * 2) The end of the buffer or string has been reached + */ + result = 0; + + /* String conversion is different than Buffer conversion */ + + switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + case ACPI_TYPE_STRING: + + /* + * Convert string to an integer - for most cases, the string must be + * hexadecimal as per the ACPI specification. The only exception (as + * of ACPI 3.0) is that the to_integer() operator allows both decimal + * and hexadecimal strings (hex prefixed with "0x"). + */ + status = acpi_ut_strtoul64((char *)pointer, flags, &result); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + break; + + case ACPI_TYPE_BUFFER: + + /* Check for zero-length buffer */ + + if (!count) { + return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); + } + + /* Transfer no more than an integer's worth of data */ + + if (count > acpi_gbl_integer_byte_width) { + count = acpi_gbl_integer_byte_width; + } + + /* + * Convert buffer to an integer - we simply grab enough raw data + * from the buffer to fill an integer + */ + for (i = 0; i < count; i++) { + /* + * Get next byte and shift it into the Result. + * Little endian is used, meaning that the first byte of the buffer + * is the LSB of the integer + */ + result |= (((acpi_integer) pointer[i]) << (i * 8)); + } + break; + + default: + + /* No other types can get here */ + break; + } + + /* Create a new integer */ + + return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n", + ACPI_FORMAT_UINT64(result))); + + /* Save the Result */ + + return_desc->integer.value = result; + acpi_ex_truncate_for32bit_table(return_desc); + *result_desc = return_desc; + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_convert_to_buffer + * + * PARAMETERS: obj_desc - Object to be converted. Must be an + * Integer, Buffer, or String + * result_desc - Where the new buffer object is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert an ACPI Object to a Buffer + * + ******************************************************************************/ + +acpi_status +acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, + union acpi_operand_object **result_desc) +{ + union acpi_operand_object *return_desc; + u8 *new_buf; + + ACPI_FUNCTION_TRACE_PTR(ex_convert_to_buffer, obj_desc); + + switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + case ACPI_TYPE_BUFFER: + + /* No conversion necessary */ + + *result_desc = obj_desc; + return_ACPI_STATUS(AE_OK); + + case ACPI_TYPE_INTEGER: + + /* + * Create a new Buffer object. + * Need enough space for one integer + */ + return_desc = + acpi_ut_create_buffer_object(acpi_gbl_integer_byte_width); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + /* Copy the integer to the buffer, LSB first */ + + new_buf = return_desc->buffer.pointer; + ACPI_MEMCPY(new_buf, + &obj_desc->integer.value, + acpi_gbl_integer_byte_width); + break; + + case ACPI_TYPE_STRING: + + /* + * Create a new Buffer object + * Size will be the string length + * + * NOTE: Add one to the string length to include the null terminator. + * The ACPI spec is unclear on this subject, but there is existing + * ASL/AML code that depends on the null being transferred to the new + * buffer. + */ + return_desc = acpi_ut_create_buffer_object((acpi_size) + obj_desc->string. + length + 1); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + /* Copy the string to the buffer */ + + new_buf = return_desc->buffer.pointer; + ACPI_STRNCPY((char *)new_buf, (char *)obj_desc->string.pointer, + obj_desc->string.length); + break; + + default: + return_ACPI_STATUS(AE_TYPE); + } + + /* Mark buffer initialized */ + + return_desc->common.flags |= AOPOBJ_DATA_VALID; + *result_desc = return_desc; + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_convert_to_ascii + * + * PARAMETERS: Integer - Value to be converted + * Base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX + * String - Where the string is returned + * data_width - Size of data item to be converted, in bytes + * + * RETURN: Actual string length + * + * DESCRIPTION: Convert an ACPI Integer to a hex or decimal string + * + ******************************************************************************/ + +static u32 +acpi_ex_convert_to_ascii(acpi_integer integer, + u16 base, u8 * string, u8 data_width) +{ + acpi_integer digit; + u32 i; + u32 j; + u32 k = 0; + u32 hex_length; + u32 decimal_length; + u32 remainder; + u8 supress_zeros; + + ACPI_FUNCTION_ENTRY(); + + switch (base) { + case 10: + + /* Setup max length for the decimal number */ + + switch (data_width) { + case 1: + decimal_length = ACPI_MAX8_DECIMAL_DIGITS; + break; + + case 4: + decimal_length = ACPI_MAX32_DECIMAL_DIGITS; + break; + + case 8: + default: + decimal_length = ACPI_MAX64_DECIMAL_DIGITS; + break; + } + + supress_zeros = TRUE; /* No leading zeros */ + remainder = 0; + + for (i = decimal_length; i > 0; i--) { + + /* Divide by nth factor of 10 */ + + digit = integer; + for (j = 0; j < i; j++) { + (void)acpi_ut_short_divide(digit, 10, &digit, + &remainder); + } + + /* Handle leading zeros */ + + if (remainder != 0) { + supress_zeros = FALSE; + } + + if (!supress_zeros) { + string[k] = (u8) (ACPI_ASCII_ZERO + remainder); + k++; + } + } + break; + + case 16: + + /* hex_length: 2 ascii hex chars per data byte */ + + hex_length = ACPI_MUL_2(data_width); + for (i = 0, j = (hex_length - 1); i < hex_length; i++, j--) { + + /* Get one hex digit, most significant digits first */ + + string[k] = + (u8) acpi_ut_hex_to_ascii_char(integer, + ACPI_MUL_4(j)); + k++; + } + break; + + default: + return (0); + } + + /* + * Since leading zeros are suppressed, we must check for the case where + * the integer equals 0 + * + * Finally, null terminate the string and return the length + */ + if (!k) { + string[0] = ACPI_ASCII_ZERO; + k = 1; + } + + string[k] = 0; + return ((u32) k); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_convert_to_string + * + * PARAMETERS: obj_desc - Object to be converted. Must be an + * Integer, Buffer, or String + * result_desc - Where the string object is returned + * Type - String flags (base and conversion type) + * + * RETURN: Status + * + * DESCRIPTION: Convert an ACPI Object to a string + * + ******************************************************************************/ + +acpi_status +acpi_ex_convert_to_string(union acpi_operand_object * obj_desc, + union acpi_operand_object ** result_desc, u32 type) +{ + union acpi_operand_object *return_desc; + u8 *new_buf; + u32 i; + u32 string_length = 0; + u16 base = 16; + u8 separator = ','; + + ACPI_FUNCTION_TRACE_PTR(ex_convert_to_string, obj_desc); + + switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + case ACPI_TYPE_STRING: + + /* No conversion necessary */ + + *result_desc = obj_desc; + return_ACPI_STATUS(AE_OK); + + case ACPI_TYPE_INTEGER: + + switch (type) { + case ACPI_EXPLICIT_CONVERT_DECIMAL: + + /* Make room for maximum decimal number */ + + string_length = ACPI_MAX_DECIMAL_DIGITS; + base = 10; + break; + + default: + + /* Two hex string characters for each integer byte */ + + string_length = ACPI_MUL_2(acpi_gbl_integer_byte_width); + break; + } + + /* + * Create a new String + * Need enough space for one ASCII integer (plus null terminator) + */ + return_desc = + acpi_ut_create_string_object((acpi_size) string_length); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + new_buf = return_desc->buffer.pointer; + + /* Convert integer to string */ + + string_length = + acpi_ex_convert_to_ascii(obj_desc->integer.value, base, + new_buf, + acpi_gbl_integer_byte_width); + + /* Null terminate at the correct place */ + + return_desc->string.length = string_length; + new_buf[string_length] = 0; + break; + + case ACPI_TYPE_BUFFER: + + /* Setup string length, base, and separator */ + + switch (type) { + case ACPI_EXPLICIT_CONVERT_DECIMAL: /* Used by to_decimal_string */ + /* + * From ACPI: "If Data is a buffer, it is converted to a string of + * decimal values separated by commas." + */ + base = 10; + + /* + * Calculate the final string length. Individual string values + * are variable length (include separator for each) + */ + for (i = 0; i < obj_desc->buffer.length; i++) { + if (obj_desc->buffer.pointer[i] >= 100) { + string_length += 4; + } else if (obj_desc->buffer.pointer[i] >= 10) { + string_length += 3; + } else { + string_length += 2; + } + } + break; + + case ACPI_IMPLICIT_CONVERT_HEX: + /* + * From the ACPI spec: + *"The entire contents of the buffer are converted to a string of + * two-character hexadecimal numbers, each separated by a space." + */ + separator = ' '; + string_length = (obj_desc->buffer.length * 3); + break; + + case ACPI_EXPLICIT_CONVERT_HEX: /* Used by to_hex_string */ + /* + * From ACPI: "If Data is a buffer, it is converted to a string of + * hexadecimal values separated by commas." + */ + string_length = (obj_desc->buffer.length * 3); + break; + + default: + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* + * Create a new string object and string buffer + * (-1 because of extra separator included in string_length from above) + * Allow creation of zero-length strings from zero-length buffers. + */ + if (string_length) { + string_length--; + } + + return_desc = acpi_ut_create_string_object((acpi_size) + string_length); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + new_buf = return_desc->buffer.pointer; + + /* + * Convert buffer bytes to hex or decimal values + * (separated by commas or spaces) + */ + for (i = 0; i < obj_desc->buffer.length; i++) { + new_buf += acpi_ex_convert_to_ascii((acpi_integer) + obj_desc->buffer. + pointer[i], base, + new_buf, 1); + *new_buf++ = separator; /* each separated by a comma or space */ + } + + /* + * Null terminate the string + * (overwrites final comma/space from above) + */ + if (obj_desc->buffer.length) { + new_buf--; + } + *new_buf = 0; + break; + + default: + return_ACPI_STATUS(AE_TYPE); + } + + *result_desc = return_desc; + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_convert_to_target_type + * + * PARAMETERS: destination_type - Current type of the destination + * source_desc - Source object to be converted. + * result_desc - Where the converted object is returned + * walk_state - Current method state + * + * RETURN: Status + * + * DESCRIPTION: Implements "implicit conversion" rules for storing an object. + * + ******************************************************************************/ + +acpi_status +acpi_ex_convert_to_target_type(acpi_object_type destination_type, + union acpi_operand_object *source_desc, + union acpi_operand_object **result_desc, + struct acpi_walk_state *walk_state) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(ex_convert_to_target_type); + + /* Default behavior */ + + *result_desc = source_desc; + + /* + * If required by the target, + * perform implicit conversion on the source before we store it. + */ + switch (GET_CURRENT_ARG_TYPE(walk_state->op_info->runtime_args)) { + case ARGI_SIMPLE_TARGET: + case ARGI_FIXED_TARGET: + case ARGI_INTEGER_REF: /* Handles Increment, Decrement cases */ + + switch (destination_type) { + case ACPI_TYPE_LOCAL_REGION_FIELD: + /* + * Named field can always handle conversions + */ + break; + + default: + /* No conversion allowed for these types */ + + if (destination_type != + ACPI_GET_OBJECT_TYPE(source_desc)) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Explicit operator, will store (%s) over existing type (%s)\n", + acpi_ut_get_object_type_name + (source_desc), + acpi_ut_get_type_name + (destination_type))); + status = AE_TYPE; + } + } + break; + + case ARGI_TARGETREF: + + switch (destination_type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_BUFFER_FIELD: + case ACPI_TYPE_LOCAL_BANK_FIELD: + case ACPI_TYPE_LOCAL_INDEX_FIELD: + /* + * These types require an Integer operand. We can convert + * a Buffer or a String to an Integer if necessary. + */ + status = + acpi_ex_convert_to_integer(source_desc, result_desc, + 16); + break; + + case ACPI_TYPE_STRING: + /* + * The operand must be a String. We can convert an + * Integer or Buffer if necessary + */ + status = + acpi_ex_convert_to_string(source_desc, result_desc, + ACPI_IMPLICIT_CONVERT_HEX); + break; + + case ACPI_TYPE_BUFFER: + /* + * The operand must be a Buffer. We can convert an + * Integer or String if necessary + */ + status = + acpi_ex_convert_to_buffer(source_desc, result_desc); + break; + + default: + ACPI_ERROR((AE_INFO, + "Bad destination type during conversion: %X", + destination_type)); + status = AE_AML_INTERNAL; + break; + } + break; + + case ARGI_REFERENCE: + /* + * create_xxxx_field cases - we are storing the field object into the name + */ + break; + + default: + ACPI_ERROR((AE_INFO, + "Unknown Target type ID 0x%X AmlOpcode %X DestType %s", + GET_CURRENT_ARG_TYPE(walk_state->op_info-> + runtime_args), + walk_state->opcode, + acpi_ut_get_type_name(destination_type))); + status = AE_AML_INTERNAL; + } + + /* + * Source-to-Target conversion semantics: + * + * If conversion to the target type cannot be performed, then simply + * overwrite the target with the new object and type. + */ + if (status == AE_TYPE) { + status = AE_OK; + } + + return_ACPI_STATUS(status); +} |