diff options
Diffstat (limited to 'drivers/ata/pata_hpt366.c')
| -rw-r--r-- | drivers/ata/pata_hpt366.c | 23 |
1 files changed, 6 insertions, 17 deletions
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 0bd48e8f21bd..af49bfb57247 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -11,9 +11,7 @@ * * * TODO - * Maybe PLL mode - * Look into engine reset on timeout errors. Should not be - * required. + * Look into engine reset on timeout errors. Should not be required. */ @@ -27,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.6.7" +#define DRV_VERSION "0.6.8" struct hpt_clock { u8 xfer_mode; @@ -207,17 +205,8 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, { struct hpt_clock *clocks = ap->host->private_data; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - u32 addr2 = 0x51 + 4 * ap->port_no; + u32 addr = 0x40 + 4 * adev->devno; u32 mask, reg; - u8 fast; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - if (fast & 0x80) { - fast &= ~0x80; - pci_write_config_byte(pdev, addr2, fast); - } /* determine timing mask and find matching clock entry */ if (mode < XFER_MW_DMA_0) @@ -240,9 +229,9 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid * problems handling I/O errors later. */ - pci_read_config_dword(pdev, addr1, ®); + pci_read_config_dword(pdev, addr, ®); reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000; - pci_write_config_dword(pdev, addr1, reg); + pci_write_config_dword(pdev, addr, reg); } /** @@ -372,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) break; } /* Now kick off ATA set up */ - return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv); + return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); } #ifdef CONFIG_PM |