1 files changed, 88 insertions, 13 deletions

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index fd36099428a4..3e7f6a9da28b 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
 
 /*
  *	Private data structure to glue stuff together
@@ -86,6 +86,47 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d
 	return ata_do_set_mode(link, r_failed_dev);
 }
 
+/**
+ *	pcmcia_set_mode_8bit	-	PCMCIA specific mode setup
+ *	@link: link
+ *	@r_failed_dev: Return pointer for failed device
+ *
+ *	For the simple emulated 8bit stuff the less we do the better.
+ */
+
+static int pcmcia_set_mode_8bit(struct ata_link *link,
+				struct ata_device **r_failed_dev)
+{
+	return 0;
+}
+
+/**
+ *	ata_data_xfer_8bit	 -	Transfer data by 8bit PIO
+ *	@dev: device to target
+ *	@buf: data buffer
+ *	@buflen: buffer length
+ *	@rw: read/write
+ *
+ *	Transfer data from/to the device data register by 8 bit PIO.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
+				unsigned char *buf, unsigned int buflen, int rw)
+{
+	struct ata_port *ap = dev->link->ap;
+
+	if (rw == READ)
+		ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
+	else
+		iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
+
+	return buflen;
+}
+
+
 static struct scsi_host_template pcmcia_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -129,6 +170,31 @@ static struct ata_port_operations pcmcia_port_ops = {
 	.port_start	= ata_sff_port_start,
 };
 
+static struct ata_port_operations pcmcia_8bit_port_ops = {
+	.set_mode	= pcmcia_set_mode_8bit,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= ata_bmdma_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+
+	.data_xfer	= ata_data_xfer_8bit,
+
+	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+
+	.port_start	= ata_sff_port_start,
+};
+
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
@@ -153,9 +219,12 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		cistpl_cftable_entry_t dflt;
 	} *stk = NULL;
 	cistpl_cftable_entry_t *cfg;
-	int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM;
+	int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
 	unsigned long io_base, ctl_base;
 	void __iomem *io_addr, *ctl_addr;
+	int n_ports = 1;
+
+	struct ata_port_operations *ops = &pcmcia_port_ops;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (info == NULL)
@@ -282,27 +351,32 @@ next_entry:
 	/* FIXME: Could be more ports at base + 0x10 but we only deal with
 	   one right now */
 	if (pdev->io.NumPorts1 >= 0x20)
-		printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n");
+		n_ports = 2;
 
+	if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
+		ops = &pcmcia_8bit_port_ops;
 	/*
 	 *	Having done the PCMCIA plumbing the ATA side is relatively
 	 *	sane.
 	 */
 	ret = -ENOMEM;
-	host = ata_host_alloc(&pdev->dev, 1);
+	host = ata_host_alloc(&pdev->dev, n_ports);
 	if (!host)
 		goto failed;
-	ap = host->ports[0];
 
-	ap->ops = &pcmcia_port_ops;
-	ap->pio_mask = 1;		/* ISA so PIO 0 cycles */
-	ap->flags |= ATA_FLAG_SLAVE_POSS;
-	ap->ioaddr.cmd_addr = io_addr;
-	ap->ioaddr.altstatus_addr = ctl_addr;
-	ap->ioaddr.ctl_addr = ctl_addr;
-	ata_std_ports(&ap->ioaddr);
+	for (p = 0; p < n_ports; p++) {
+		ap = host->ports[p];
 
-	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+		ap->ops = ops;
+		ap->pio_mask = 1;		/* ISA so PIO 0 cycles */
+		ap->flags |= ATA_FLAG_SLAVE_POSS;
+		ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
+		ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
+		ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
+		ata_std_ports(&ap->ioaddr);
+
+		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+	}
 
 	/* activate */
 	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
@@ -360,6 +434,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
 	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), 	/* TI emulated */
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */