diff options
Diffstat (limited to 'drivers/ata')
76 files changed, 1316 insertions, 542 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 66e012cd3271..788bba2b1e17 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -404,7 +404,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -412,7 +412,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, @@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -430,7 +430,7 @@ static const struct ata_port_info ahci_port_info[] = { AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, @@ -440,7 +440,7 @@ static const struct ata_port_info ahci_port_info[] = { AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -448,7 +448,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, @@ -456,7 +456,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -464,7 +464,7 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, @@ -1348,7 +1348,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, writel(message[1], mmio + hpriv->em_loc+4); /* save off new led state for port/slot */ - emp->led_state = message[1]; + emp->led_state = state; /* * tell hardware to transmit the message @@ -2565,6 +2565,15 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev) /* PCI slot number of the controller */ .driver_data = (void *)0x1FUL, }, + { + .ident = "HP Compaq 6720s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, { } /* terminate list */ }; @@ -2647,8 +2656,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; - if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) - pci_intx(pdev, 1); + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) + pci_enable_msi(pdev); /* save initial config */ ahci_save_initial_config(pdev, hpriv); diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index dc48a6398abe..ecfd22b4f1ce 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -118,8 +118,8 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id u16 command; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &generic_port_ops }; diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index ef8b30d577bd..e5cbe80ce172 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -446,34 +446,34 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .port_ops = &piix_pata_ops, }, [piix_pata_33] = /* PIIX4 at 33MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_pata_ops, }, [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* Check: maybe 0x07 */ - .udma_mask = ATA_UDMA2, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok */ + .udma_mask = ATA_UDMA2, .port_ops = &ich_pata_ops, }, [ich_pata_66] = /* ICH controllers up to 66MHz */ { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */ .udma_mask = ATA_UDMA4, .port_ops = &ich_pata_ops, }, @@ -481,17 +481,17 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_100] = { .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &ich_pata_ops, }, [ich5_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -499,8 +499,8 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -508,8 +508,8 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -517,8 +517,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -526,8 +526,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -535,8 +535,8 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -544,8 +544,8 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { .flags = PIIX_SATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -553,9 +553,9 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_vmw] = { .flags = PIIX_PATA_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .udma_mask = ATA_UDMA_MASK_40C, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .udma_mask = ATA_UDMA2, .port_ops = &piix_vmw_ops, }, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 060bcd601f57..e7ea77cf6069 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -57,6 +57,7 @@ #include <linux/scatterlist.h> #include <linux/io.h> #include <linux/async.h> +#include <linux/log2.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> @@ -2389,6 +2390,7 @@ int ata_dev_configure(struct ata_device *dev) dev->cylinders = 0; dev->heads = 0; dev->sectors = 0; + dev->multi_count = 0; /* * common ATA, ATAPI feature tests @@ -2426,8 +2428,15 @@ int ata_dev_configure(struct ata_device *dev) dev->n_sectors = ata_id_n_sectors(id); - if (dev->id[59] & 0x100) - dev->multi_count = dev->id[59] & 0xff; + /* get current R/W Multiple count setting */ + if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) { + unsigned int max = dev->id[47] & 0xff; + unsigned int cnt = dev->id[59] & 0xff; + /* only recognize/allow powers of two here */ + if (is_power_of_2(max) && is_power_of_2(cnt)) + if (cnt <= max) + dev->multi_count = cnt; + } if (ata_id_has_lba(id)) { const char *lba_desc; @@ -6709,6 +6718,7 @@ EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_do_dev_read_id); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_pio_queue_task); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ea890911d4fa..01831312c360 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -547,7 +547,7 @@ void ata_scsi_error(struct Scsi_Host *host) /* For new EH, all qcs are finished in one of three ways - * normal completion, error completion, and SCSI timeout. - * Both cmpletions can race against SCSI timeout. When normal + * Both completions can race against SCSI timeout. When normal * completion wins, the qc never reaches EH. When error * completion wins, the qc has ATA_QCFLAG_FAILED set. * @@ -562,7 +562,19 @@ void ata_scsi_error(struct Scsi_Host *host) int nr_timedout = 0; spin_lock_irqsave(ap->lock, flags); - + + /* This must occur under the ap->lock as we don't want + a polled recovery to race the real interrupt handler + + The lost_interrupt handler checks for any completed but + non-notified command and completes much like an IRQ handler. + + We then fall into the error recovery code which will treat + this as if normal completion won the race */ + + if (ap->ops->lost_interrupt) + ap->ops->lost_interrupt(ap); + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -606,6 +618,9 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_tries = ATA_EH_MAX_TRIES; } else spin_unlock_wait(ap->lock); + + /* If we timed raced normal completion and there is nothing to + recover nr_timedout == 0 why exactly are we doing error recovery ? */ repeat: /* invoke error handler */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index f93dc029dfde..8332e97a9de3 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -52,6 +52,7 @@ const struct ata_port_operations ata_sff_port_ops = { .softreset = ata_sff_softreset, .hardreset = sata_sff_hardreset, .postreset = ata_sff_postreset, + .drain_fifo = ata_sff_drain_fifo, .error_handler = ata_sff_error_handler, .post_internal_cmd = ata_sff_post_internal_cmd, @@ -64,6 +65,8 @@ const struct ata_port_operations ata_sff_port_ops = { .sff_irq_on = ata_sff_irq_on, .sff_irq_clear = ata_sff_irq_clear, + .lost_interrupt = ata_sff_lost_interrupt, + .port_start = ata_sff_port_start, }; EXPORT_SYMBOL_GPL(ata_sff_port_ops); @@ -1646,7 +1649,7 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf); * RETURNS: * One if interrupt was handled, zero if not (shared irq). */ -inline unsigned int ata_sff_host_intr(struct ata_port *ap, +unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) { struct ata_eh_info *ehi = &ap->link.eh_info; @@ -1775,6 +1778,48 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) EXPORT_SYMBOL_GPL(ata_sff_interrupt); /** + * ata_sff_lost_interrupt - Check for an apparent lost interrupt + * @ap: port that appears to have timed out + * + * Called from the libata error handlers when the core code suspects + * an interrupt has been lost. If it has complete anything we can and + * then return. Interface must support altstatus for this faster + * recovery to occur. + * + * Locking: + * Caller holds host lock + */ + +void ata_sff_lost_interrupt(struct ata_port *ap) +{ + u8 status; + struct ata_queued_cmd *qc; + + /* Only one outstanding command per SFF channel */ + qc = ata_qc_from_tag(ap, ap->link.active_tag); + /* Check we have a live one.. */ + if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE)) + return; + /* We cannot lose an interrupt on a polled command */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return; + /* See if the controller thinks it is still busy - if so the command + isn't a lost IRQ but is still in progress */ + status = ata_sff_altstatus(ap); + if (status & ATA_BUSY) + return; + + /* There was a command running, we are no longer busy and we have + no interrupt. */ + ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n", + status); + /* Run the host interrupt logic as if the interrupt had not been + lost */ + ata_sff_host_intr(ap, qc); +} +EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); + +/** * ata_sff_freeze - Freeze SFF controller port * @ap: port to freeze * @@ -2199,6 +2244,39 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) EXPORT_SYMBOL_GPL(ata_sff_postreset); /** + * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void ata_sff_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count < 32768; count++) + ioread16(ap->ioaddr.data_addr); + + /* Can become DEBUG later */ + if (count) + ata_port_printk(ap, KERN_DEBUG, + "drained %d bytes to clear DRQ.\n", count); + +} +EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); + +/** * ata_sff_error_handler - Stock error handler for BMDMA controller * @ap: port to handle error for * @@ -2239,7 +2317,8 @@ void ata_sff_error_handler(struct ata_port *ap) * really a timeout event, adjust error mask and * cancel frozen state. */ - if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + if (qc->err_mask == AC_ERR_TIMEOUT + && (host_stat & ATA_DMA_ERR)) { qc->err_mask = AC_ERR_HOST_BUS; thaw = 1; } @@ -2250,6 +2329,13 @@ void ata_sff_error_handler(struct ata_port *ap) ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); + /* We *MUST* do FIFO draining before we issue a reset as several + * devices helpfully clear their internal state and will lock solid + * if we touch the data port post reset. Pass qc in case anyone wants + * to do different PIO/DMA recovery or has per command fixups + */ + if (ap->ops->drain_fifo) + ap->ops->drain_fifo(qc); spin_unlock_irqrestore(ap->lock, flags); @@ -2959,4 +3045,3 @@ out: EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ - diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index cea8014cd87e..89a1e0018e71 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -79,8 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); -extern void ata_pio_queue_task(struct ata_port *ap, void *data, - unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index 8b77a9802df1..d8f35fe44421 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -246,9 +246,9 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x7f, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &pacpi_ops, }; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index eb99dbe78081..751b7ea4816c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -492,53 +492,53 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &ali_early_port_ops }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, /* UDMA33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &ali_c2_port_ops }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &ali_c2_port_ops }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &ali_c4_port_ops }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &ali_c5_port_ops }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 115b1cd6dcf5..33a74f11171c 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -455,74 +455,74 @@ static void amd_clear_fifo(struct pci_dev *pdev) static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { - { /* 0: AMD 7401 */ + { /* 0: AMD 7401 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, /* No SWDMA */ - .udma_mask = 0x07, /* UDMA 33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &amd33_port_ops }, { /* 1: Early AMD7409 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &amd66_port_ops }, - { /* 2: AMD 7409, no swdma errata */ + { /* 2: AMD 7409 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &amd66_port_ops }, { /* 3: AMD 7411 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops }, { /* 4: AMD 7441 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops }, - { /* 5: AMD 8111*/ + { /* 5: AMD 8111 - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &amd133_port_ops }, - { /* 6: AMD 8111 UDMA 100 (Serenade) */ + { /* 6: AMD 8111 UDMA 100 (Serenade) - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd133_port_ops }, { /* 7: Nvidia Nforce */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &nv100_port_ops }, - { /* 8: Nvidia Nforce2 and later */ + { /* 8: Nvidia Nforce2 and later - no swdma */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA6, /* UDMA 133, no swdma */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &nv133_port_ops }, { /* 9: AMD CS5536 (Geode companion) */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA5, /* UDMA 100 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &amd100_port_ops } }; diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 6b3092c75ffe..d332cfdb0f30 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -12,7 +12,6 @@ * performance Alessandro Zummo <alessandro.zummo@towertech.it> * * TODO - * 850 serialization once the core supports it * Investigate no_dsc on 850R * Clock detect */ @@ -29,7 +28,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_artop" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /* * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we @@ -283,6 +282,31 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra); } +/** + * artop_6210_qc_defer - implement serialization + * @qc: command + * + * Issue commands per host on this chip. + */ + +static int artop6210_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static struct scsi_host_template artop_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -293,6 +317,7 @@ static struct ata_port_operations artop6210_ops = { .set_piomode = artop6210_set_piomode, .set_dmamode = artop6210_set_dmamode, .prereset = artop6210_pre_reset, + .qc_defer = artop6210_qc_defer, }; static struct ata_port_operations artop6260_ops = { @@ -323,29 +348,29 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; static const struct ata_port_info info_6210 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &artop6210_ops, }; static const struct ata_port_info info_626x = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &artop6260_ops, }; static const struct ata_port_info info_628x = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &artop6260_ops, }; static const struct ata_port_info info_628x_fast = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &artop6260_ops, }; @@ -362,12 +387,8 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) if (id->driver_data == 0) { /* 6210 variant */ ppi[0] = &info_6210; - ppi[1] = &ata_dummy_port_info; /* BIOS may have left us in UDMA, clear it before libata probe */ pci_write_config_byte(pdev, 0x54, 0); - /* For the moment (also lacks dsc) */ - printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); - printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); } else if (id->driver_data == 1) /* 6260 */ ppi[0] = &info_626x; diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c index ab61095093b9..5c129f99a7e3 100644 --- a/drivers/ata/pata_at32.c +++ b/drivers/ata/pata_at32.c @@ -67,7 +67,9 @@ * * Alter PIO_MASK below according to table to set maximal PIO mode. */ -#define PIO_MASK (0x1f) +enum { + PIO_MASK = ATA_PIO4, +}; /* * Struct containing private information about device. diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 506adde8ebb3..bec0b8ade66d 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -220,9 +220,9 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x06, /* No MWDMA0 support */ - .udma_mask = 0x3F, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, .port_ops = &atiixp_port_ops }; static const struct pci_bits atiixp_enable_bits[] = { diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 1050fed96b2b..c4b47a3e5446 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1502,7 +1502,7 @@ static struct ata_port_info bfin_port_info[] = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .mwdma_mask = 0, .udma_mask = 0, .port_ops = &bfin_pata_ops, diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 34a394264c3d..5acf9fa9b39f 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -211,7 +211,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cmd640_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 3167d8fed2f2..f98dffedf4bc 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -299,40 +299,40 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with broken UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 with working UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &cmd64x_port_ops }, { /* CMD 646 rev 1 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cmd646r1_port_ops }, { /* CMD 648 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cmd648_port_ops }, { /* CMD 649 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cmd648_port_ops } diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 1186bcd2781c..db6a96984f3f 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -158,7 +158,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; struct ata_port_info pi = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cs5520_port_ops, }; const struct ata_port_info *ppi[2]; diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index bba453381f44..c974b05e4129 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -298,15 +298,15 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &cs5530_port_ops }; /* The docking connector doesn't do UDMA, and it seems not MWDMA */ static const struct ata_port_info info_palmax_secondary = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &cs5530_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 8b236af84c2e..d33aa28239a9 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -181,8 +181,8 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &cs5535_port_ops }; diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index afed92976198..6da4cb486c8d 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -241,8 +241,8 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &cs5536_port_ops, }; diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index d546425cd380..8fb040bf7361 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -124,8 +124,8 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &cy82c693_port_ops }; const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index ac6392ea35b0..2085e0a3a05a 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -251,9 +251,9 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ - .udma_mask = 0x0f, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, .port_ops = &efar_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 65c28e5a6cd7..d7f2da127d13 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -336,8 +336,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_hpt366 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &hpt366_port_ops }; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 42163998de9a..81ab57003aba 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -753,55 +753,55 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370_33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a_33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; /* HPT371, 372 and friends - UDMA133 */ static const struct ata_port_info info_hpt372 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; /* HPT374 - UDMA100, function 1 uses different prereset method */ static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt372_port_ops }; static const struct ata_port_info info_hpt374_fn1 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &hpt374_fn1_port_ops }; diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index d5c9fd7b82bb..3d59fe0a408d 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -441,8 +441,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* HPT372N and friends - UDMA133 */ static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &hpt3x2n_port_ops }; diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index f19cc645881a..7e310253b36b 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -188,11 +188,11 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, #if defined(CONFIG_PATA_HPT3X3_DMA) /* Further debug needed */ - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, #endif .port_ops = &hpt3x3_port_ops }; diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index cf9e9848f8b5..e7347db5b6c4 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -297,7 +297,7 @@ static int icside_dma_init(struct pata_icside_info *info) if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { state->dma = ec->dma; - info->mwdma_mask = 0x07; /* MW0..2 */ + info->mwdma_mask = ATA_MWDMA2; } return 0; @@ -473,7 +473,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info) for (i = 0; i < info->nr_ports; i++) { struct ata_port *ap = host->ports[i]; - ap->pio_mask = 0x1f; + ap->pio_mask = ATA_PIO4; ap->mwdma_mask = info->mwdma_mask; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ops = &pata_icside_port_ops; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 15cdb9148aab..4bceb8803a10 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.2" +#define DRV_VERSION "0.2.5" static struct scsi_host_template isapnp_sht = { ATA_PIO_SHT(DRV_NAME), @@ -28,6 +28,13 @@ static struct ata_port_operations isapnp_port_ops = { .cable_detect = ata_cable_40wire, }; +static struct ata_port_operations isapnp_noalt_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + /* No altstatus so we don't want to use the lost interrupt poll */ + .lost_interrupt = ATA_OP_NULL, +}; + /** * isapnp_init_one - attach an isapnp interface * @idev: PnP device @@ -65,8 +72,8 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap = host->ports[0]; - ap->ops = &isapnp_port_ops; - ap->pio_mask = 1; + ap->ops = &isapnp_noalt_port_ops; + ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; @@ -76,6 +83,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; + ap->ops = &isapnp_port_ops; } ata_sff_std_ports(&ap->ioaddr); diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index c113d7c079c8..f156da8076f7 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -262,8 +262,8 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */ .port_ops = &it8213_ops, }; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index b05b86a912c5..188bc2fcd22c 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -875,29 +875,29 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static const struct ata_port_info info_smart = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_smart_port_ops }; static const struct ata_port_info info_passthru = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_passthru_port_ops }; static const struct ata_port_info info_rdc = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &it821x_rdc_port_ops }; static const struct ata_port_info info_rdc_11 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, /* No UDMA */ .port_ops = &it821x_rdc_port_ops }; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index b173c157ab00..19fdecf319a6 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -176,7 +176,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) ap = host->ports[0]; ap->ops = &ixp4xx_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; ixp4xx_setup_port(ap, data, cs0->start, cs1->start); diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 38cf1ab2d289..3a1474ac8838 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -136,8 +136,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &jmicron_ops, diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index e3bc1b436284..3f830f0fe2cc 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -129,7 +129,7 @@ static int qdi; /* Set to probe QDI controllers */ static int winbond; /* Set to probe Winbond controllers, give I/O port if non standard */ static int autospeed; /* Chip present which snoops speed changes */ -static int pio_mask = 0x1F; /* PIO range for autospeed devices */ +static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 76e399bf8c1b..2096fb737f82 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -126,8 +126,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &marvell_ops, @@ -136,8 +136,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i /* Slave possible as its magically mapped not real */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &marvell_ops, diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 50ae6d13078a..68d27bc70d06 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -737,10 +737,10 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) */ prop = of_get_property(op->node, "mwdma-mode", &proplen); if ((prop) && (proplen >= 4)) - mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1); prop = of_get_property(op->node, "udma-mode", &proplen); if ((prop) && (proplen >= 4)) - udma_mask = 0x7 & ((1 << (*prop + 1)) - 1); + udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1); ata_irq = irq_of_parse_and_map(op->node, 0); if (ata_irq == NO_IRQ) { diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index aa576cac4d17..b21f0021f54a 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -200,7 +200,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) the MPIIX your box goes castors up */ ap->ops = &mpiix_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 9dc05e1656a8..bdb236957cb9 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -51,8 +51,8 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e .flags = ATA_FLAG_SLAVE_POSS, /* Actually we don't really care about these as the firmware deals with it */ - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, /* UDMA 133 */ .port_ops = &netcell_ops, }; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4dd9a3b031e4..0fb6b1b1e634 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -136,7 +136,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!base) return -ENOMEM; ap->ops = &ninja32_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = base + 0x10; diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 40d411c460de..ca53fac06717 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -144,7 +144,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x0F, + .pio_mask = ATA_PIO3, .port_ops = &ns87410_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index 89bf5f865d6a..773b1590b492 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -346,8 +346,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ns87415_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; @@ -355,8 +355,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e #if defined(CONFIG_SUPERIO) static const struct ata_port_info info87560 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &ns87560_pata_ops, }; diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index 0fe4ef309c62..efe2c1985af3 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -871,7 +871,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) ap->private_data = cf_port; cf_port->ap = ap; ap->ops = &octeon_cf_ops; - ap->pio_mask = 0x7f; /* Support PIO 0-6 */ + ap->pio_mask = ATA_PIO6; ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING; @@ -900,7 +900,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) ap->ioaddr.ctl_addr = cs1 + (6 << 1) + 1; octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16; - ap->mwdma_mask = 0x1f; /* Support MWDMA 0-4 */ + ap->mwdma_mask = ATA_MWDMA4; irq = platform_get_irq(pdev, 0); irq_handler = octeon_cf_interrupt; diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 2c1a91c40c1a..84ac5033ac89 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -238,8 +238,8 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &oldpiix_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index e4fa4d565e96..99eddda2d2e5 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -163,7 +163,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &opti_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 93bb6e91973f..86885a445f97 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -399,15 +399,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_82c700 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &optidma_port_ops }; static const struct ata_port_info info_82c700_udma = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &optiplus_port_ops }; const struct ata_port_info *ppi[] = { &info_82c700, NULL }; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 64b2e2281ee7..f4d009ed50ac 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.5" /* * Private data structure to glue stuff together @@ -126,6 +126,37 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, return buflen; } +/** + * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count++ < 65536;) + ioread8(ap->ioaddr.data_addr); + + if (count) + ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n", + count); + +} static struct scsi_host_template pcmcia_sht = { ATA_PIO_SHT(DRV_NAME), @@ -143,6 +174,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { .sff_data_xfer = ata_data_xfer_8bit, .cable_detect = ata_cable_40wire, .set_mode = pcmcia_set_mode_8bit, + .drain_fifo = pcmcia_8bit_drain_fifo, }; #define CS_CHECK(fn, ret) \ @@ -299,7 +331,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) ap = host->ports[p]; ap->ops = ops; - ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = io_addr + 0x10 * p; ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index e94efccaa482..ca5cad0fd80b 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -152,18 +152,18 @@ static struct ata_port_info pdc2027x_port_info[] = { { .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &pdc2027x_pata100_ops, }, /* PDC_UDMA_133 */ { .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA6, /* udma0-6 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, .port_ops = &pdc2027x_pata133_ops, }, }; diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 799a6a098712..5fedb3d4032b 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -291,22 +291,22 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id static const struct ata_port_info info[3] = { { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &pdc2024x_port_ops }, { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &pdc2026x_port_ops }, { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &pdc2026x_port_ops } diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index f1b26f7c8e4d..45879dc6fa41 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -212,11 +212,11 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i if (type == 6580) { ap->ops = &qdi6580_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; } else { ap->ops = &qdi6500_port_ops; - ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ + ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */ ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; } diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 695d44ae52c6..4401b332eaab 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -216,9 +216,9 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma1-2 */ - .udma_mask = 0x14, /* UDMA33/66 only */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA24_ONLY, .port_ops = &radisys_pata_ops, }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index ebfcda26d639..8e3cdef8a25f 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -48,63 +48,11 @@ struct rb532_cf_info { void __iomem *iobase; unsigned int gpio_line; - int frozen; unsigned int irq; }; /* ------------------------------------------------------------------------ */ -static inline void rb532_pata_finish_io(struct ata_port *ap) -{ - struct ata_host *ah = ap->host; - struct rb532_cf_info *info = ah->private_data; - - /* FIXME: Keep previous delay. If this is merely a fence then - ata_sff_sync might be sufficient. */ - ata_sff_dma_pause(ap); - ndelay(RB500_CF_IO_DELAY); -} - -static void rb532_pata_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - writeb(tf->command, ap->ioaddr.command_addr); - rb532_pata_finish_io(ap); -} - -static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->link->ap; - void __iomem *ioaddr = ap->ioaddr.data_addr; - int retlen = buflen; - - if (write_data) { - for (; buflen > 0; buflen--, buf++) - writeb(*buf, ioaddr); - } else { - for (; buflen > 0; buflen--, buf++) - *buf = readb(ioaddr); - } - - rb532_pata_finish_io(adev->link->ap); - return retlen; -} - -static void rb532_pata_freeze(struct ata_port *ap) -{ - struct rb532_cf_info *info = ap->host->private_data; - - info->frozen = 1; -} - -static void rb532_pata_thaw(struct ata_port *ap) -{ - struct rb532_cf_info *info = ap->host->private_data; - - info->frozen = 0; -} - static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) { struct ata_host *ah = dev_instance; @@ -112,8 +60,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) if (gpio_get_value(info->gpio_line)) { set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); - if (!info->frozen) - ata_sff_interrupt(info->irq, dev_instance); + ata_sff_interrupt(info->irq, dev_instance); } else { set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } @@ -123,10 +70,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance) static struct ata_port_operations rb532_pata_port_ops = { .inherits = &ata_sff_port_ops, - .sff_exec_command = rb532_pata_exec_command, - .sff_data_xfer = rb532_pata_data_xfer, - .freeze = rb532_pata_freeze, - .thaw = rb532_pata_thaw, + .sff_data_xfer = ata_sff_data_xfer32, }; /* ------------------------------------------------------------------------ */ @@ -145,7 +89,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap = ah->ports[0]; ap->ops = &rb532_pata_port_ops; - ap->pio_mask = 0x1f; /* PIO4 */ + ap->pio_mask = ATA_PIO4; ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; @@ -160,7 +104,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah) static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) { - unsigned int irq; + int irq; int gpio; struct resource *res; struct ata_host *ah; diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 46d6bc1bf1e9..0c574c065c62 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -88,7 +88,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &rz1000_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 9a4bdca54616..f49814d6fd2e 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -2,7 +2,6 @@ * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk> * * TODO: Mode selection filtering - * TODO: Can't enable second channel until ATA core has serialize * TODO: Needs custom DMA cleanup code * * Based very heavily on @@ -178,6 +177,31 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc) return ata_sff_qc_issue(qc); } +/** + * sc1200_qc_defer - implement serialization + * @qc: command + * + * Serialize command issue on this controller. + */ + +static int sc1200_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_host *host = qc->ap->host; + struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; + int rc; + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + /* Now apply serialization rules. Only allow a command if the + other channel state machine is idle */ + if (alt && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static struct scsi_host_template sc1200_sht = { ATA_BMDMA_SHT(DRV_NAME), .sg_tablesize = LIBATA_DUMB_MAX_PRD, @@ -187,6 +211,7 @@ static struct ata_port_operations sc1200_port_ops = { .inherits = &ata_bmdma_port_ops, .qc_prep = ata_sff_dumb_qc_prep, .qc_issue = sc1200_qc_issue, + .qc_defer = sc1200_qc_defer, .cable_detect = ata_cable_40wire, .set_piomode = sc1200_set_piomode, .set_dmamode = sc1200_set_dmamode, @@ -205,13 +230,13 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &sc1200_port_ops }; /* Can't enable port 2 yet, see top comments */ - const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + const struct ata_port_info *ppi[] = { &info, }; return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); } diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index d447f1cb46ec..4257d6b40af4 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -1001,8 +1001,8 @@ static struct ata_port_operations scc_pata_ops = { static struct ata_port_info scc_port_info[] = { { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x00, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &scc_pata_ops, }, diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index 6aeeeeb34124..99cceb458e2a 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -84,9 +84,9 @@ static struct ata_port_operations sch_pata_ops = { static struct ata_port_info sch_port_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, /* pio0-4 */ - .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sch_pata_ops, }; diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 8d2fd9dd40c7..beaed12d50e4 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -398,26 +398,26 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id static const struct ata_port_info info[4] = { { /* OSB4 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &serverworks_osb4_port_ops }, { /* OSB4 no UDMA */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x00, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ .port_ops = &serverworks_osb4_port_ops }, { /* CSB5 */ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &serverworks_csb_port_ops }, { /* CSB5 - later revisions*/ .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &serverworks_csb_port_ops } diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 9e764e5747e6..4cb649d8d38c 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -282,15 +282,15 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sil680_port_ops }; static const struct ata_port_info info_slow = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil680_port_ops }; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 27ceb42a774b..488e77bcd22b 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -552,51 +552,57 @@ static struct ata_port_operations sis_old_ops = { static const struct ata_port_info sis_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, - .udma_mask = 0, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ .port_ops = &sis_old_ops, }; static const struct ata_port_info sis_info33 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, - .udma_mask = ATA_UDMA2, /* UDMA 33 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, .port_ops = &sis_old_ops, }; static const struct ata_port_info sis_info66 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = ATA_UDMA4, /* UDMA 66 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA4, .port_ops = &sis_66_ops, }; static const struct ata_port_info sis_info100 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA5, .port_ops = &sis_100_ops, }; static const struct ata_port_info sis_info100_early = { .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA5, - .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; static const struct ata_port_info sis_info133 = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; const struct ata_port_info sis_info133_for_sata = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_for_sata_ops, }; static const struct ata_port_info sis_info133_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_early_ops, }; diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 1b0e7b6d8ef5..29f733c32066 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -283,13 +283,13 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id { static const struct ata_port_info info_dma = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &sl82c105_port_ops }; static const struct ata_port_info info_early = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, + .pio_mask = ATA_PIO4, .port_ops = &sl82c105_port_ops }; /* for now use only the first port */ diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index ef9597517cdd..f1f13ff222fd 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -191,8 +191,8 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &triflex_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index ba556d3e6963..b08e6e0f82b6 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -422,46 +422,46 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Early VIA without UDMA support */ static const struct ata_port_info via_mwdma_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops }; /* Ditto with IRQ masking required */ static const struct ata_port_info via_mwdma_info_borked = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .port_ops = &via_port_ops_noirq, }; /* VIA UDMA 33 devices (and borked 66) */ static const struct ata_port_info via_udma33_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, .port_ops = &via_port_ops }; /* VIA UDMA 66 devices */ static const struct ata_port_info via_udma66_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, .port_ops = &via_port_ops }; /* VIA UDMA 100 devices */ static const struct ata_port_info via_udma100_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &via_port_ops }; /* UDMA133 with bad AST (All current 133) */ static const struct ata_port_info via_udma133_info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */ .port_ops = &via_port_ops }; diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 319e164a3d74..6d8619b6f670 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -193,7 +193,7 @@ static __init int winbond_init_one(unsigned long port) ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); ap->ops = &winbond_port_ops; - ap->pio_mask = 0x1F; + ap->pio_mask = ATA_PIO4; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; ap->ioaddr.altstatus_addr = ctl_addr; diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index be53545c9f64..39588178d028 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -148,6 +148,8 @@ static struct scsi_host_template adma_ata_sht = { static struct ata_port_operations adma_ata_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .check_atapi_dma = adma_check_atapi_dma, .qc_prep = adma_qc_prep, .qc_issue = adma_qc_issue, @@ -166,7 +168,7 @@ static struct ata_port_info adma_port_info[] = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ + .pio_mask = ATA_PIO4_ONLY, .udma_mask = ATA_UDMA4, .port_ops = &adma_ata_ops, }, diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 55bc88c1707b..c2e90e1fece0 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1279,8 +1279,8 @@ static struct ata_port_operations sata_fsl_ops = { static const struct ata_port_info sata_fsl_port_info[] = { { .flags = SATA_FSL_HOST_FLAGS, - .pio_mask = 0x1f, /* pio 0-4 */ - .udma_mask = 0x7f, /* udma 0-6 */ + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, .port_ops = &sata_fsl_ops, }, }; diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index fbbd87c96f10..305a4f825f53 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -744,8 +744,8 @@ static struct ata_port_operations inic_port_ops = { static struct ata_port_info inic_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &inic_port_ops }; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 74b1080d116d..a377226b81c8 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1,10 +1,13 @@ /* * sata_mv.c - Marvell SATA support * - * Copyright 2008: Marvell Corporation, all rights reserved. + * Copyright 2008-2009: Marvell Corporation, all rights reserved. * Copyright 2005: EMC Corporation, all rights reserved. * Copyright 2005 Red Hat, Inc. All rights reserved. * + * Originally written by Brett Russ. + * Extensive overhaul and enhancement by Mark Lord <mlord@pobox.com>. + * * Please ALWAYS copy linux-ide@vger.kernel.org on emails. * * This program is free software; you can redistribute it and/or modify @@ -25,20 +28,13 @@ /* * sata_mv TODO list: * - * --> Errata workaround for NCQ device errors. - * * --> More errata workarounds for PCI-X. * * --> Complete a full errata audit for all chipsets to identify others. * - * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). - * * --> Develop a low-power-consumption strategy, and implement it. * - * --> [Experiment, low priority] Investigate interrupt coalescing. - * Quite often, especially with PCI Message Signalled Interrupts (MSI), - * the overhead reduced by interrupt mitigation is quite often not - * worth the latency cost. + * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. * * --> [Experiment, Marvell value added] Is it possible to use target * mode to cross-connect two Linux boxes with Marvell cards? If so, @@ -68,7 +64,27 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.25" +#define DRV_VERSION "1.27" + +/* + * module options + */ + +static int msi; +#ifdef CONFIG_PCI +module_param(msi, int, S_IRUGO); +MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); +#endif + +static int irq_coalescing_io_count; +module_param(irq_coalescing_io_count, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_io_count, + "IRQ coalescing I/O count threshold (0..255)"); + +static int irq_coalescing_usecs; +module_param(irq_coalescing_usecs, int, S_IRUGO); +MODULE_PARM_DESC(irq_coalescing_usecs, + "IRQ coalescing time threshold in usecs"); enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -79,13 +95,32 @@ enum { MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ + /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */ + COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */ + MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */ + MAX_COAL_IO_COUNT = 255, /* completed I/O count */ + MV_PCI_REG_BASE = 0, - MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ - MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), - MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), - MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), - MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), + + /* + * Per-chip ("all ports") interrupt coalescing feature. + * This is only for GEN_II / GEN_IIE hardware. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + MV_COAL_REG_BASE = 0x18000, + MV_IRQ_COAL_CAUSE = (MV_COAL_REG_BASE + 0x08), + ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ + + MV_IRQ_COAL_IO_THRESHOLD = (MV_COAL_REG_BASE + 0xcc), + MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0), + + /* + * Registers for the (unused here) transaction coalescing feature: + */ + MV_TRAN_COAL_CAUSE_LO = (MV_COAL_REG_BASE + 0x88), + MV_TRAN_COAL_CAUSE_HI = (MV_COAL_REG_BASE + 0x8c), MV_SATAHC0_REG_BASE = 0x20000, MV_FLASH_CTL_OFS = 0x1046c, @@ -117,17 +152,16 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ - MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | - ATA_FLAG_PIO_POLLING, + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, + + MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, - MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, + MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ | + ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA, - MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_AN, + MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, @@ -180,16 +214,18 @@ enum { PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64, SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020, SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024, - ERR_IRQ = (1 << 0), /* shift by port # */ - DONE_IRQ = (1 << 1), /* shift by port # */ + ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ + DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ + DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */ + DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */ PCI_ERR = (1 << 18), - TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ - TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ - PORTS_0_3_COAL_DONE = (1 << 8), - PORTS_4_7_COAL_DONE = (1 << 17), - PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ + TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ + TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ + PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */ + PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */ + ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */ GPIO_INT = (1 << 22), SELF_INT = (1 << 23), TWSI_INT = (1 << 24), @@ -205,6 +241,21 @@ enum { HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ + /* + * Per-HC (Host-Controller) interrupt coalescing feature. + * This is present on all chip generations. + * + * Coalescing defers the interrupt until either the IO_THRESHOLD + * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. + */ + HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, + HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + + SOC_LED_CTRL_OFS = 0x2c, + SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ + SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ + /* with dev activity LED */ + /* Shadow block registers */ SHD_BLK_OFS = 0x100, SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ @@ -346,6 +397,12 @@ enum { EDMA_ARB_CFG_OFS = 0x38, EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ + EDMA_UNKNOWN_RSVD_OFS = 0x6C, /* GenIIe unknown/reserved */ + + BMDMA_CMD_OFS = 0x224, /* bmdma command register */ + BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */ /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), @@ -359,12 +416,14 @@ enum { MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ + MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ + MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -433,6 +492,18 @@ struct mv_sg { __le32 reserved; }; +/* + * We keep a local cache of a few frequently accessed port + * registers here, to avoid having to read them (very slow) + * when switching between EDMA and non-EDMA modes. + */ +struct mv_cached_regs { + u32 fiscfg; + u32 ltmode; + u32 haltcond; + u32 unknown_rsvd; +}; + struct mv_port_priv { struct mv_crqb *crqb; dma_addr_t crqb_dma; @@ -445,6 +516,7 @@ struct mv_port_priv { unsigned int resp_idx; u32 pp_flags; + struct mv_cached_regs cached; unsigned int delayed_eh_pmp_map; }; @@ -535,7 +607,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); static int mv_stop_edma(struct ata_port *ap); static int mv_stop_edma_engine(void __iomem *port_mmio); -static void mv_edma_cfg(struct ata_port *ap, int want_ncq); +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma); static void mv_pmp_select(struct ata_port *ap, int pmp); static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, @@ -546,6 +618,14 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); +static void mv_sff_irq_clear(struct ata_port *ap); +static int mv_check_atapi_dma(struct ata_queued_cmd *qc); +static void mv_bmdma_setup(struct ata_queued_cmd *qc); +static void mv_bmdma_start(struct ata_queued_cmd *qc); +static void mv_bmdma_stop(struct ata_queued_cmd *qc); +static u8 mv_bmdma_status(struct ata_port *ap); +static u8 mv_sff_check_status(struct ata_port *ap); + /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of * PRDs for 64K boundaries in mv_fill_sg(). @@ -566,6 +646,8 @@ static struct scsi_host_template mv6_sht = { static struct ata_port_operations mv5_ops = { .inherits = &ata_sff_port_ops, + .lost_interrupt = ATA_OP_NULL, + .qc_defer = mv_qc_defer, .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, @@ -593,6 +675,14 @@ static struct ata_port_operations mv6_ops = { .pmp_softreset = mv_softreset, .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + + .sff_check_status = mv_sff_check_status, + .sff_irq_clear = mv_sff_irq_clear, + .check_atapi_dma = mv_check_atapi_dma, + .bmdma_setup = mv_bmdma_setup, + .bmdma_start = mv_bmdma_start, + .bmdma_stop = mv_bmdma_stop, + .bmdma_status = mv_bmdma_status, }; static struct ata_port_operations mv_iie_ops = { @@ -603,53 +693,49 @@ static struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ - .flags = MV_COMMON_FLAGS, + .flags = MV_GEN_I_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_508x */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_5080 */ - .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, + .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_604x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ, + .flags = MV_GEN_II_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_608x */ - .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | - ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | MV_FLAG_DUAL_HC, + .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_6042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_7042 */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS, + .flags = MV_GEN_IIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -794,6 +880,44 @@ static inline int mv_get_hc_count(unsigned long port_flags) return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } +/** + * mv_save_cached_regs - (re-)initialize cached port registers + * @ap: the port whose registers we are caching + * + * Initialize the local cache of port registers, + * so that reading them over and over again can + * be avoided on the hotter paths of this driver. + * This saves a few microseconds each time we switch + * to/from EDMA mode to perform (eg.) a drive cache flush. + */ +static void mv_save_cached_regs(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); + pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); + pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS); +} + +/** + * mv_write_cached_reg - write to a cached port register + * @addr: hardware address of the register + * @old: pointer to cached value of the register + * @new: new value for the register + * + * Write a new value to a cached register, + * but only if the value is different from before. + */ +static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) +{ + if (new != *old) { + *old = new; + writel(new, addr); + } +} + static void mv_set_edma_ptrs(void __iomem *port_mmio, struct mv_host_priv *hpriv, struct mv_port_priv *pp) @@ -825,6 +949,23 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } +static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) +{ + /* + * When writing to the main_irq_mask in hardware, + * we must ensure exclusivity between the interrupt coalescing bits + * and the corresponding individual port DONE_IRQ bits. + * + * Note that this register is really an "IRQ enable" register, + * not an "IRQ mask" register as Marvell's naming might suggest. + */ + if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE)) + mask &= ~DONE_IRQ_0_3; + if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE)) + mask &= ~DONE_IRQ_4_7; + writelfl(mask, hpriv->main_irq_mask_addr); +} + static void mv_set_main_irq_mask(struct ata_host *host, u32 disable_bits, u32 enable_bits) { @@ -835,7 +976,7 @@ static void mv_set_main_irq_mask(struct ata_host *host, new_mask = (old_mask & ~disable_bits) | enable_bits; if (new_mask != old_mask) { hpriv->main_irq_mask = new_mask; - writelfl(new_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(new_mask, hpriv); } } @@ -852,8 +993,94 @@ static void mv_enable_port_irqs(struct ata_port *ap, mv_set_main_irq_mask(ap->host, disable_bits, enable_bits); } +static void mv_clear_and_enable_port_irqs(struct ata_port *ap, + void __iomem *port_mmio, + unsigned int port_irqs) +{ + struct mv_host_priv *hpriv = ap->host->private_data; + int hardport = mv_hardport_from_port(ap->port_no); + void __iomem *hc_mmio = mv_hc_base_from_port( + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; + + /* clear EDMA event indicators, if any */ + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + + /* clear FIS IRQ Cause */ + if (IS_GEN_IIE(hpriv)) + writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + + mv_enable_port_irqs(ap, port_irqs); +} + +static void mv_set_irq_coalescing(struct ata_host *host, + unsigned int count, unsigned int usecs) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base, *hc_mmio; + u32 coal_enable = 0; + unsigned long flags; + unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC; + const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | + ALL_PORTS_COAL_DONE; + + /* Disable IRQ coalescing if either threshold is zero */ + if (!usecs || !count) { + clks = count = 0; + } else { + /* Respect maximum limits of the hardware */ + clks = usecs * COAL_CLOCKS_PER_USEC; + if (clks > MAX_COAL_TIME_THRESHOLD) + clks = MAX_COAL_TIME_THRESHOLD; + if (count > MAX_COAL_IO_COUNT) + count = MAX_COAL_IO_COUNT; + } + + spin_lock_irqsave(&host->lock, flags); + mv_set_main_irq_mask(host, coal_disable, 0); + + if (is_dual_hc && !IS_GEN_I(hpriv)) { + /* + * GEN_II/GEN_IIE with dual host controllers: + * one set of global thresholds for the entire chip. + */ + writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); + writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); + /* clear leftover coal IRQ bit */ + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + if (count) + coal_enable = ALL_PORTS_COAL_DONE; + clks = count = 0; /* force clearing of regular regs below */ + } + + /* + * All chips: independent thresholds for each HC on the chip. + */ + hc_mmio = mv_hc_base_from_port(mmio, 0); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_0_3_COAL_DONE; + if (is_dual_hc) { + hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + if (count) + coal_enable |= PORTS_4_7_COAL_DONE; + } + + mv_set_main_irq_mask(host, 0, coal_enable); + spin_unlock_irqrestore(&host->lock, flags); +} + /** - * mv_start_dma - Enable eDMA engine + * mv_start_edma - Enable eDMA engine * @base: port base address * @pp: port private data * @@ -863,7 +1090,7 @@ static void mv_enable_port_irqs(struct ata_port *ap, * LOCKING: * Inherited from caller. */ -static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, +static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, struct mv_port_priv *pp, u8 protocol) { int want_ncq = (protocol == ATA_PROT_NCQ); @@ -875,26 +1102,11 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, } if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { struct mv_host_priv *hpriv = ap->host->private_data; - int hardport = mv_hardport_from_port(ap->port_no); - void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), ap->port_no); - u32 hc_irq_cause; - - /* clear EDMA event indicators, if any */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear pending irq events */ - hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); - writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - - mv_edma_cfg(ap, want_ncq); - - /* clear FIS IRQ Cause */ - if (IS_GEN_IIE(hpriv)) - writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + mv_edma_cfg(ap, want_ncq, 1); mv_set_edma_ptrs(port_mmio, hpriv, pp); - mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ); + mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; @@ -952,6 +1164,7 @@ static int mv_stop_edma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; + int err = 0; if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) return 0; @@ -959,9 +1172,10 @@ static int mv_stop_edma(struct ata_port *ap) mv_wait_for_edma_empty_idle(ap); if (mv_stop_edma_engine(port_mmio)) { ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - return -EIO; + err = -EIO; } - return 0; + mv_edma_cfg(ap, 0, 0); + return err; } #ifdef ATA_DEBUG @@ -1130,35 +1344,33 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) return ATA_DEFER_PORT; } -static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs) +static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) { - u32 new_fiscfg, old_fiscfg; - u32 new_ltmode, old_ltmode; - u32 new_haltcond, old_haltcond; + struct mv_port_priv *pp = ap->private_data; + void __iomem *port_mmio; - old_fiscfg = readl(port_mmio + FISCFG_OFS); - old_ltmode = readl(port_mmio + LTMODE_OFS); - old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg; + u32 ltmode, *old_ltmode = &pp->cached.ltmode; + u32 haltcond, *old_haltcond = &pp->cached.haltcond; - new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); - new_ltmode = old_ltmode & ~LTMODE_BIT8; - new_haltcond = old_haltcond | EDMA_ERR_DEV; + ltmode = *old_ltmode & ~LTMODE_BIT8; + haltcond = *old_haltcond | EDMA_ERR_DEV; if (want_fbs) { - new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; - new_ltmode = old_ltmode | LTMODE_BIT8; + fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC; + ltmode = *old_ltmode | LTMODE_BIT8; if (want_ncq) - new_haltcond &= ~EDMA_ERR_DEV; + haltcond &= ~EDMA_ERR_DEV; else - new_fiscfg |= FISCFG_WAIT_DEV_ERR; + fiscfg |= FISCFG_WAIT_DEV_ERR; + } else { + fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); } - if (new_fiscfg != old_fiscfg) - writelfl(new_fiscfg, port_mmio + FISCFG_OFS); - if (new_ltmode != old_ltmode) - writelfl(new_ltmode, port_mmio + LTMODE_OFS); - if (new_haltcond != old_haltcond) - writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS); + port_mmio = mv_ap_base(ap); + mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg); + mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode); + mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond); } static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) @@ -1176,7 +1388,86 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); } -static void mv_edma_cfg(struct ata_port *ap, int want_ncq) +/** + * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma + * @ap: Port being initialized + * + * There are two DMA modes on these chips: basic DMA, and EDMA. + * + * Bit-0 of the "EDMA RESERVED" register enables/disables use + * of basic DMA on the GEN_IIE versions of the chips. + * + * This bit survives EDMA resets, and must be set for basic DMA + * to function, and should be cleared when EDMA is active. + */ +static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) +{ + struct mv_port_priv *pp = ap->private_data; + u32 new, *old = &pp->cached.unknown_rsvd; + + if (enable_bmdma) + new = *old | 1; + else + new = *old & ~1; + mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); +} + +/* + * SOC chips have an issue whereby the HDD LEDs don't always blink + * during I/O when NCQ is enabled. Enabling a special "LED blink" mode + * of the SOC takes care of it, generating a steady blink rate when + * any drive on the chip is active. + * + * Unfortunately, the blink mode is a global hardware setting for the SOC, + * so we must use it whenever at least one port on the SOC has NCQ enabled. + * + * We turn "LED blink" off when NCQ is not in use anywhere, because the normal + * LED operation works then, and provides better (more accurate) feedback. + * + * Note that this code assumes that an SOC never has more than one HC onboard. + */ +static void mv_soc_led_blink_enable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + + if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN) + return; + hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + +static void mv_soc_led_blink_disable(struct ata_port *ap) +{ + struct ata_host *host = ap->host; + struct mv_host_priv *hpriv = host->private_data; + void __iomem *hc_mmio; + u32 led_ctrl; + unsigned int port; + + if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)) + return; + + /* disable led-blink only if no ports are using NCQ */ + for (port = 0; port < hpriv->n_ports; port++) { + struct ata_port *this_ap = host->ports[port]; + struct mv_port_priv *pp = this_ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) + return; + } + + hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; + hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); + writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); +} + +static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) { u32 cfg; struct mv_port_priv *pp = ap->private_data; @@ -1185,7 +1476,8 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~MV_PP_FLAG_FBS_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1206,7 +1498,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) */ want_fbs &= want_ncq; - mv_config_fbs(port_mmio, want_ncq, want_fbs); + mv_config_fbs(ap, want_ncq, want_fbs); if (want_fbs) { pp->pp_flags |= MV_PP_FLAG_FBS_EN; @@ -1214,18 +1506,27 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) } cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ - cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (!IS_SOC(hpriv)) - cfg |= (1 << 18); /* enab early completion */ + if (want_edma) { + cfg |= (1 << 22); /* enab 4-entry host queue cache */ + if (!IS_SOC(hpriv)) + cfg |= (1 << 18); /* enab early completion */ + } if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ + mv_bmdma_enable_iie(ap, !want_edma); + + if (IS_SOC(hpriv)) { + if (want_ncq) + mv_soc_led_blink_enable(ap); + else + mv_soc_led_blink_disable(ap); + } } if (want_ncq) { cfg |= EDMA_CFG_NCQ; pp->pp_flags |= MV_PP_FLAG_NCQ_EN; - } else - pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN; + } writelfl(cfg, port_mmio + EDMA_CFG_OFS); } @@ -1309,6 +1610,8 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + mv_save_cached_regs(ap); + mv_edma_cfg(ap, 0, 0); return 0; out_port_free_dma_mem: @@ -1357,12 +1660,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) u32 offset = addr & 0xffff; u32 len = sg_len; - if ((offset + sg_len > 0x10000)) + if (offset + len > 0x10000) len = 0x10000 - offset; mv_sg->addr = cpu_to_le32(addr & 0xffffffff); mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); mv_sg->flags_size = cpu_to_le32(len & 0xffff); + mv_sg->reserved = 0; sg_len -= len; addr += len; @@ -1374,6 +1678,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) if (likely(last_sg)) last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + mb(); /* ensure data structure is visible to the chipset */ } static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) @@ -1384,6 +1689,147 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) } /** + * mv_sff_irq_clear - Clear hardware interrupt after DMA. + * @ap: Port associated with this ATA transaction. + * + * We need this only for ATAPI bmdma transactions, + * as otherwise we experience spurious interrupts + * after libata-sff handles the bmdma interrupts. + */ +static void mv_sff_irq_clear(struct ata_port *ap) +{ + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); +} + +/** + * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. + * @qc: queued command to check for chipset/DMA compatibility. + * + * The bmdma engines cannot handle speculative data sizes + * (bytecount under/over flow). So only allow DMA for + * data transfer commands with known data sizes. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + if (scmd) { + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_SEND_DVD_STRUCTURE: + case GPCMD_SEND_CUE_SHEET: + return 0; /* DMA is safe */ + } + } + return -EOPNOTSUPP; /* use PIO instead */ +} + +/** + * mv_bmdma_setup - Set up BMDMA transaction + * @qc: queued command to prepare DMA for. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + mv_fill_sg(qc); + + /* clear all DMA cmd bits */ + writel(0, port_mmio + BMDMA_CMD_OFS); + + /* load PRD table addr. */ + writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, + port_mmio + BMDMA_PRD_HIGH_OFS); + writelfl(pp->sg_tbl_dma[qc->tag], + port_mmio + BMDMA_PRD_LOW_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * mv_bmdma_start - Start a BMDMA transaction + * @qc: queued command to start DMA on. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; + + /* start host DMA transaction */ + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); +} + +/** + * mv_bmdma_stop - Stop BMDMA transfer + * @qc: queued command to stop DMA on. + * + * Clears the ATA_DMA_START flag in the bmdma control register + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + u32 cmd; + + /* clear start/stop bit */ + cmd = readl(port_mmio + BMDMA_CMD_OFS); + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +/** + * mv_bmdma_status - Read BMDMA status + * @ap: port for which to retrieve DMA status. + * + * Read and return equivalent of the sff BMDMA status register. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_bmdma_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg, status; + + /* + * Other bits are valid only if ATA_DMA_ACTIVE==0, + * and the ATA_DMA_INTR bit doesn't exist. + */ + reg = readl(port_mmio + BMDMA_STATUS_OFS); + if (reg & ATA_DMA_ACTIVE) + status = ATA_DMA_ACTIVE; + else + status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + return status; +} + +/** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare * @@ -1545,6 +1991,132 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) } /** + * mv_sff_check_status - fetch device status, if valid + * @ap: ATA port to fetch status from + * + * When using command issue via mv_qc_issue_fis(), + * the initial ATA_BUSY state does not show up in the + * ATA status (shadow) register. This can confuse libata! + * + * So we have a hook here to fake ATA_BUSY for that situation, + * until the first time a BUSY, DRQ, or ERR bit is seen. + * + * The rest of the time, it simply returns the ATA status register. + */ +static u8 mv_sff_check_status(struct ata_port *ap) +{ + u8 stat = ioread8(ap->ioaddr.status_addr); + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { + if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; + else + stat = ATA_BUSY; + } + return stat; +} + +/** + * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register + * @fis: fis to be sent + * @nwords: number of 32-bit words in the fis + */ +static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 ifctl, old_ifctl, ifstat; + int i, timeout = 200, final_word = nwords - 1; + + /* Initiate FIS transmission mode */ + old_ifctl = readl(port_mmio + SATA_IFCTL_OFS); + ifctl = 0x100 | (old_ifctl & 0xf); + writelfl(ifctl, port_mmio + SATA_IFCTL_OFS); + + /* Send all words of the FIS except for the final word */ + for (i = 0; i < final_word; ++i) + writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* Flag end-of-transmission, and then send the final word */ + writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS); + writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS); + + /* + * Wait for FIS transmission to complete. + * This typically takes just a single iteration. + */ + do { + ifstat = readl(port_mmio + SATA_IFSTAT_OFS); + } while (!(ifstat & 0x1000) && --timeout); + + /* Restore original port configuration */ + writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS); + + /* See if it worked */ + if ((ifstat & 0x3000) != 0x1000) { + ata_port_printk(ap, KERN_WARNING, + "%s transmission error, ifstat=%08x\n", + __func__, ifstat); + return AC_ERR_OTHER; + } + return 0; +} + +/** + * mv_qc_issue_fis - Issue a command directly as a FIS + * @qc: queued command to start + * + * Note that the ATA shadow registers are not updated + * after command issue, so the device will appear "READY" + * if polled, even while it is BUSY processing the command. + * + * So we use a status hook to fake ATA_BUSY until the drive changes state. + * + * Note: we don't get updated shadow regs on *completion* + * of non-data commands. So avoid sending them via this function, + * as they will appear to have completed immediately. + * + * GEN_IIE has special registers that we could get the result tf from, + * but earlier chipsets do not. For now, we ignore those registers. + */ +static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + struct ata_link *link = qc->dev->link; + u32 fis[5]; + int err = 0; + + ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis); + err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0])); + if (err) + return err; + + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + /* fall through */ + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_FIRST; + break; + case ATA_PROT_PIO: + pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; + if (qc->tf.flags & ATA_TFLAG_WRITE) + ap->hsm_task_state = HSM_ST_FIRST; + else + ap->hsm_task_state = HSM_ST; + break; + default: + ap->hsm_task_state = HSM_ST_LAST; + break; + } + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + return 0; +} + +/** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start * @@ -1558,14 +2130,28 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) */ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { + static int limit_warnings = 10; struct ata_port *ap = qc->ap; void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 in_index; + unsigned int port_irqs; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) { - static int limit_warnings = 10; + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); + pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; + in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + + /* Write the request in pointer to kick the EDMA to life */ + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + return 0; + + case ATA_PROT_PIO: /* * Errata SATA#16, SATA#24: warn if multiple DRQs expected. * @@ -1583,27 +2169,46 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) ": attempting PIO w/multiple DRQ: " "this may fail due to h/w errata\n"); } - /* - * We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_edma(ap); - mv_enable_port_irqs(ap, ERR_IRQ); - mv_pmp_select(ap, qc->dev->link->pmp); - return ata_sff_qc_issue(qc); + /* drop through */ + case ATA_PROT_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; + break; } - mv_start_dma(ap, port_mmio, pp, qc->tf.protocol); - - pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; - in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; + if (qc->tf.flags & ATA_TFLAG_POLLING) + port_irqs = ERR_IRQ; /* mask device interrupt when polling */ + else + port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ - /* and write the request in pointer to kick the EDMA to life */ - writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + /* + * We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_edma(ap); + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); + mv_pmp_select(ap, qc->dev->link->pmp); - return 0; + if (qc->tf.command == ATA_CMD_READ_LOG_EXT) { + struct mv_host_priv *hpriv = ap->host->private_data; + /* + * Workaround for 88SX60x1 FEr SATA#25 (part 2). + * + * After any NCQ error, the READ_LOG_EXT command + * from libata-eh *must* use mv_qc_issue_fis(). + * Otherwise it might fail, due to chip errata. + * + * Rather than special-case it, we'll just *always* + * use this method here for READ_LOG_EXT, making for + * easier testing. + */ + if (IS_GEN_II(hpriv)) + return mv_qc_issue_fis(qc); + } + return ata_sff_qc_issue(qc); } static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) @@ -1614,8 +2219,12 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) return NULL; qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) - qc = NULL; + if (qc) { + if (qc->tf.flags & ATA_TFLAG_POLLING) + qc = NULL; + else if (!(qc->flags & ATA_QCFLAG_ACTIVE)) + qc = NULL; + } return qc; } @@ -2084,6 +2693,10 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) void __iomem *mmio = hpriv->base, *hc_mmio; unsigned int handled = 0, port; + /* If asserted, clear the "all ports" IRQ coalescing bit */ + if (main_irq_cause & ALL_PORTS_COAL_DONE) + writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + for (port = 0; port < hpriv->n_ports; port++) { struct ata_port *ap = host->ports[port]; unsigned int p, shift, hardport, port_cause; @@ -2116,6 +2729,8 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) * to ack (only) those ports via hc_irq_cause. */ ack_irqs = 0; + if (hc_cause & PORTS_0_3_COAL_DONE) + ack_irqs = HC_COAL_IRQ; for (p = 0; p < MV_PORTS_PER_HC; ++p) { if ((port + p) >= hpriv->n_ports) break; @@ -2204,7 +2819,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: block new interrupts while in here */ if (using_msi) - writel(0, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(0, hpriv); main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; @@ -2221,7 +2836,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) /* for MSI: unmask; interrupt cause bits will retrigger now */ if (using_msi) - writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv); spin_unlock(&host->lock); @@ -2774,6 +3389,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, mv_reset_channel(hpriv, mmio, ap->port_no); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); /* Workaround for errata FEr SATA#10 (part 2) */ do { @@ -2793,6 +3410,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, extra = HZ; /* only extend it once, max */ } } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); + mv_save_cached_regs(ap); + mv_edma_cfg(ap, 0, 0); return rc; } @@ -3126,6 +3745,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) * The per-port interrupts get done later as ports are set up. */ mv_set_main_irq_mask(host, 0, PCI_ERR); + mv_set_irq_coalescing(host, irq_coalescing_io_count, + irq_coalescing_usecs); done: return rc; } @@ -3287,12 +3908,6 @@ static struct pci_driver mv_pci_driver = { .remove = ata_pci_remove_one, }; -/* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - /* move to PCI layer or libata core? */ static int pci_go_64(struct pci_dev *pdev) { @@ -3474,10 +4089,5 @@ MODULE_DEVICE_TABLE(pci, mv_pci_tbl); MODULE_VERSION(DRV_VERSION); MODULE_ALIAS("platform:" DRV_NAME); -#ifdef CONFIG_PCI -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); -#endif - module_init(mv_init); module_exit(mv_exit); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index f65b53785a8f..6cda12ba8122 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -57,9 +57,9 @@ enum { NV_MMIO_BAR = 5, NV_PORTS = 2, - NV_PIO_MASK = 0x1f, - NV_MWDMA_MASK = 0x07, - NV_UDMA_MASK = 0x7f, + NV_PIO_MASK = ATA_PIO4, + NV_MWDMA_MASK = ATA_MWDMA2, + NV_UDMA_MASK = ATA_UDMA6, NV_PORT0_SCR_REG_OFFSET = 0x00, NV_PORT1_SCR_REG_OFFSET = 0x40, @@ -408,6 +408,7 @@ static struct scsi_host_template nv_swncq_sht = { static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, + .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index ba9a2570a742..b1fd7d62071a 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -176,7 +176,9 @@ static const struct ata_port_operations pdc_common_ops = { .check_atapi_dma = pdc_check_atapi_dma, .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue, + .sff_irq_clear = pdc_irq_clear, + .lost_interrupt = ATA_OP_NULL, .post_internal_cmd = pdc_post_internal_cmd, .error_handler = pdc_error_handler, @@ -213,8 +215,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_SATA_PATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_old_sata_ops, }, @@ -222,8 +224,8 @@ static const struct ata_port_info pdc_port_info[] = { [board_2037x_pata] = { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -232,8 +234,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_old_sata_ops, }, @@ -242,8 +244,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -252,8 +254,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_sata_ops, }, @@ -262,8 +264,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_GEN_II, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_pata_ops, }, @@ -272,8 +274,8 @@ static const struct ata_port_info pdc_port_info[] = { { .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA | PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_sata_ops, }, diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index a000c86ac859..c3936d35cdac 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -147,6 +147,7 @@ static struct ata_port_operations qs_ata_ops = { .softreset = ATA_OP_NULL, .error_handler = qs_error_handler, .post_internal_cmd = ATA_OP_NULL, + .lost_interrupt = ATA_OP_NULL, .scr_read = qs_scr_read, .scr_write = qs_scr_write, @@ -160,7 +161,7 @@ static const struct ata_port_info qs_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ + .pio_mask = ATA_PIO4_ONLY, .udma_mask = ATA_UDMA6, .port_ops = &qs_ata_ops, }, diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index d0091609e210..e67ce8e5caa5 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -200,8 +200,8 @@ static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, @@ -209,24 +209,24 @@ static const struct ata_port_info sil_port_info[] = { { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3512 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, /* sil_3114 */ { .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil_ops, }, diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 2590c2279fa7..0d8990dcdfcd 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -429,25 +429,25 @@ static const struct ata_port_info sil24_port_info[] = { { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3132 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3131/sil_3531 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA5, /* udma0-5 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, }; diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 9c43b4e7c4a6..8f9833228619 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -97,8 +97,8 @@ static struct ata_port_operations sis_ops = { static const struct ata_port_info sis_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x7, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sis_ops, }; diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 609d147813ae..7257f2d5c52c 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -361,8 +361,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -371,8 +371,8 @@ static const struct ata_port_info k2_port_info[] = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | K2_FLAG_SATA_8_PORTS, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -380,8 +380,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, @@ -389,8 +389,8 @@ static const struct ata_port_info k2_port_info[] = { { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index ec04b8d3c791..dce3dccced3f 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -265,8 +265,8 @@ static const struct ata_port_info pdc_port_info[] = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &pdc_20621_ops, }, diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 019575bb3e08..e5bff47e8aa1 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -89,7 +89,7 @@ static struct ata_port_operations uli_ops = { static const struct ata_port_info uli_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_IGN_SIMPLEX, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &uli_ops, }; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5c62da9cd491..98e8c50703b3 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -146,24 +146,24 @@ static struct ata_port_operations vt8251_ops = { static const struct ata_port_info vt6420_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt6420_sata_ops, }; static struct ata_port_info vt6421_sport_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt6421_sata_ops, }; static struct ata_port_info vt6421_pport_info = { .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0, + .pio_mask = ATA_PIO4, + /* No MWDMA */ .udma_mask = ATA_UDMA6, .port_ops = &vt6421_pata_ops, }; @@ -171,8 +171,8 @@ static struct ata_port_info vt6421_pport_info = { static struct ata_port_info vt8251_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vt8251_ops, }; diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index c57cdff9e6bd..ed70bd28fa2c 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -308,6 +308,9 @@ static struct scsi_host_template vsc_sata_sht = { static struct ata_port_operations vsc_sata_ops = { .inherits = &ata_bmdma_port_ops, + /* The IRQ handling is not quite standard SFF behaviour so we + cannot use the default lost interrupt handler */ + .lost_interrupt = ATA_OP_NULL, .sff_tf_load = vsc_sata_tf_load, .sff_tf_read = vsc_sata_tf_read, .freeze = vsc_freeze, @@ -345,8 +348,8 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev, static const struct ata_port_info pi = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &vsc_sata_ops, }; |