summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig25
-rw-r--r--drivers/ata/Makefile2
-rw-r--r--drivers/ata/ahci.c4
-rw-r--r--drivers/ata/ahci.h1
-rw-r--r--drivers/ata/ahci_imx.c371
-rw-r--r--drivers/ata/ahci_tegra.c359
-rw-r--r--drivers/ata/libahci.c10
-rw-r--r--drivers/ata/libahci_platform.c26
-rw-r--r--drivers/ata/libata-core.c74
-rw-r--r--drivers/ata/libata-eh.c3
-rw-r--r--drivers/ata/libata-scsi.c12
-rw-r--r--drivers/ata/libata-transport.c4
-rw-r--r--drivers/ata/libata.h2
-rw-r--r--drivers/ata/pata_arasan_cf.c6
-rw-r--r--drivers/ata/pata_bf54x.c1703
-rw-r--r--drivers/ata/pata_bk3710.c8
-rw-r--r--drivers/ata/pata_falcon.c8
-rw-r--r--drivers/ata/pata_gayle.c219
-rw-r--r--drivers/ata/pata_it821x.c6
-rw-r--r--drivers/ata/pata_macio.c12
-rw-r--r--drivers/ata/pata_mpc52xx.c1
-rw-r--r--drivers/ata/pata_samsung_cf.c4
-rw-r--r--drivers/ata/sata_dwc_460ex.c1
-rw-r--r--drivers/ata/sata_rcar.c62
24 files changed, 1055 insertions, 1868 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a7120d621154..2b16e7c8fff3 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -211,10 +211,10 @@ config AHCI_SUNXI
If unsure, say N.
config AHCI_TEGRA
- tristate "NVIDIA Tegra124 AHCI SATA support"
+ tristate "NVIDIA Tegra AHCI SATA support"
depends on ARCH_TEGRA
help
- This option enables support for the NVIDIA Tegra124 SoC's
+ This option enables support for the NVIDIA Tegra SoC's
onboard AHCI SATA.
If unsure, say N.
@@ -549,15 +549,6 @@ config PATA_ATP867X
If unsure, say N.
-config PATA_BF54X
- tristate "Blackfin 54x ATAPI support"
- depends on BF542 || BF548 || BF549
- help
- This option enables support for the built-in ATAPI controller on
- Blackfin 54x family chips.
-
- If unsure, say N.
-
config PATA_BK3710
tristate "Palmchip BK3710 PATA support"
depends on ARCH_DAVINCI
@@ -963,6 +954,18 @@ config PATA_FALCON
If unsure, say N.
+config PATA_GAYLE
+ tristate "Amiga Gayle PATA support"
+ depends on M68K && AMIGA
+ help
+ This option enables support for the on-board IDE
+ interfaces on some Amiga models (A600, A1200,
+ A4000 and A4000T) and also for IDE interfaces on
+ the Zorro expansion bus (M-Tech E-Matrix 530
+ expansion card).
+
+ If unsure, say N.
+
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support"
depends on ISAPNP
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index f1f5a3fbc777..d21cdd83f7ab 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -53,7 +53,6 @@ obj-$(CONFIG_PATA_AMD) += pata_amd.o
obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
-obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
@@ -98,6 +97,7 @@ obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
# SFF PIO only
obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
+obj-$(CONFIG_PATA_GAYLE) += pata_gayle.o
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 355a95a83a34..1ff17799769d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -550,7 +550,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
.driver_data = board_ahci_yes_fbs },
- { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642),
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), /* highpoint rocketraid 642L */
+ .driver_data = board_ahci_yes_fbs },
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0645), /* highpoint rocketraid 644L */
.driver_data = board_ahci_yes_fbs },
/* Promise */
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index a9d996e17d75..4356ef1d28a8 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -350,6 +350,7 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ struct reset_control *rsts; /* Optional */
struct regulator **target_pwrs; /* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index a58bcc069c54..6822e2f33f7e 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -23,6 +23,7 @@
#include <linux/regmap.h>
#include <linux/ahci_platform.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/libata.h>
@@ -53,11 +54,49 @@ enum {
/* Clock Reset Register */
IMX_CLOCK_RESET = 0x7f3f,
IMX_CLOCK_RESET_RESET = 1 << 0,
+ /* IMX8QM HSIO AHCI definitions */
+ IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET = 0x03,
+ IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET = 0x09,
+ IMX8QM_SATA_PHY_IMPED_RATIO_85OHM = 0x6c,
+ IMX8QM_LPCG_PHYX2_OFFSET = 0x00000,
+ IMX8QM_CSR_PHYX2_OFFSET = 0x90000,
+ IMX8QM_CSR_PHYX1_OFFSET = 0xa0000,
+ IMX8QM_CSR_PHYX_STTS0_OFFSET = 0x4,
+ IMX8QM_CSR_PCIEA_OFFSET = 0xb0000,
+ IMX8QM_CSR_PCIEB_OFFSET = 0xc0000,
+ IMX8QM_CSR_SATA_OFFSET = 0xd0000,
+ IMX8QM_CSR_PCIE_CTRL2_OFFSET = 0x8,
+ IMX8QM_CSR_MISC_OFFSET = 0xe0000,
+
+ IMX8QM_LPCG_PHYX2_PCLK0_MASK = (0x3 << 16),
+ IMX8QM_LPCG_PHYX2_PCLK1_MASK = (0x3 << 20),
+ IMX8QM_PHY_APB_RSTN_0 = BIT(0),
+ IMX8QM_PHY_MODE_SATA = BIT(19),
+ IMX8QM_PHY_MODE_MASK = (0xf << 17),
+ IMX8QM_PHY_PIPE_RSTN_0 = BIT(24),
+ IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0 = BIT(25),
+ IMX8QM_PHY_PIPE_RSTN_1 = BIT(26),
+ IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1 = BIT(27),
+ IMX8QM_STTS0_LANE0_TX_PLL_LOCK = BIT(4),
+ IMX8QM_MISC_IOB_RXENA = BIT(0),
+ IMX8QM_MISC_IOB_TXENA = BIT(1),
+ IMX8QM_MISC_PHYX1_EPCS_SEL = BIT(12),
+ IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 = BIT(24),
+ IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 = BIT(25),
+ IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 = BIT(28),
+ IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0 = BIT(29),
+ IMX8QM_SATA_CTRL_RESET_N = BIT(12),
+ IMX8QM_SATA_CTRL_EPCS_PHYRESET_N = BIT(7),
+ IMX8QM_CTRL_BUTTON_RST_N = BIT(21),
+ IMX8QM_CTRL_POWER_UP_RST_N = BIT(23),
+ IMX8QM_CTRL_LTSSM_ENABLE = BIT(4),
};
enum ahci_imx_type {
AHCI_IMX53,
AHCI_IMX6Q,
+ AHCI_IMX6QP,
+ AHCI_IMX8QM,
};
struct imx_ahci_priv {
@@ -66,10 +105,18 @@ struct imx_ahci_priv {
struct clk *sata_clk;
struct clk *sata_ref_clk;
struct clk *ahb_clk;
+ struct clk *epcs_tx_clk;
+ struct clk *epcs_rx_clk;
+ struct clk *phy_apbclk;
+ struct clk *phy_pclk0;
+ struct clk *phy_pclk1;
+ void __iomem *phy_base;
+ int clkreq_gpio;
struct regmap *gpr;
bool no_device;
bool first_time;
u32 phy_params;
+ u32 imped_ratio;
};
static int ahci_imx_hotplug;
@@ -188,11 +235,26 @@ static int imx_phy_reg_read(u16 *val, void __iomem *mmio)
static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
{
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
void __iomem *mmio = hpriv->mmio;
int timeout = 10;
u16 val;
int ret;
+ if (imxpriv->type == AHCI_IMX6QP) {
+ /* 6qp adds the sata reset mechanism, use it for 6qp sata */
+ regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+ IMX6Q_GPR5_SATA_SW_PD, 0);
+
+ regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+ IMX6Q_GPR5_SATA_SW_RST, 0);
+ udelay(50);
+ regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+ IMX6Q_GPR5_SATA_SW_RST,
+ IMX6Q_GPR5_SATA_SW_RST);
+ return 0;
+ }
+
/* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */
ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio);
if (ret)
@@ -391,6 +453,207 @@ static struct attribute *fsl_sata_ahci_attrs[] = {
};
ATTRIBUTE_GROUPS(fsl_sata_ahci);
+static int imx8_sata_enable(struct ahci_host_priv *hpriv)
+{
+ u32 val, reg;
+ int i, ret;
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+ struct device *dev = &imxpriv->ahci_pdev->dev;
+
+ /* configure the hsio for sata */
+ ret = clk_prepare_enable(imxpriv->phy_pclk0);
+ if (ret < 0) {
+ dev_err(dev, "can't enable phy_pclk0.\n");
+ return ret;
+ }
+ ret = clk_prepare_enable(imxpriv->phy_pclk1);
+ if (ret < 0) {
+ dev_err(dev, "can't enable phy_pclk1.\n");
+ goto disable_phy_pclk0;
+ }
+ ret = clk_prepare_enable(imxpriv->epcs_tx_clk);
+ if (ret < 0) {
+ dev_err(dev, "can't enable epcs_tx_clk.\n");
+ goto disable_phy_pclk1;
+ }
+ ret = clk_prepare_enable(imxpriv->epcs_rx_clk);
+ if (ret < 0) {
+ dev_err(dev, "can't enable epcs_rx_clk.\n");
+ goto disable_epcs_tx_clk;
+ }
+ ret = clk_prepare_enable(imxpriv->phy_apbclk);
+ if (ret < 0) {
+ dev_err(dev, "can't enable phy_apbclk.\n");
+ goto disable_epcs_rx_clk;
+ }
+ /* Configure PHYx2 PIPE_RSTN */
+ regmap_read(imxpriv->gpr, IMX8QM_CSR_PCIEA_OFFSET +
+ IMX8QM_CSR_PCIE_CTRL2_OFFSET, &val);
+ if ((val & IMX8QM_CTRL_LTSSM_ENABLE) == 0) {
+ /* The link of the PCIEA of HSIO is down */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_PHYX2_OFFSET,
+ IMX8QM_PHY_PIPE_RSTN_0 |
+ IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0,
+ IMX8QM_PHY_PIPE_RSTN_0 |
+ IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0);
+ }
+ regmap_read(imxpriv->gpr, IMX8QM_CSR_PCIEB_OFFSET +
+ IMX8QM_CSR_PCIE_CTRL2_OFFSET, &reg);
+ if ((reg & IMX8QM_CTRL_LTSSM_ENABLE) == 0) {
+ /* The link of the PCIEB of HSIO is down */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_PHYX2_OFFSET,
+ IMX8QM_PHY_PIPE_RSTN_1 |
+ IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1,
+ IMX8QM_PHY_PIPE_RSTN_1 |
+ IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1);
+ }
+ if (((reg | val) & IMX8QM_CTRL_LTSSM_ENABLE) == 0) {
+ /* The links of both PCIA and PCIEB of HSIO are down */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_LPCG_PHYX2_OFFSET,
+ IMX8QM_LPCG_PHYX2_PCLK0_MASK |
+ IMX8QM_LPCG_PHYX2_PCLK1_MASK,
+ 0);
+ }
+
+ /* set PWR_RST and BT_RST of csr_pciea */
+ val = IMX8QM_CSR_PCIEA_OFFSET + IMX8QM_CSR_PCIE_CTRL2_OFFSET;
+ regmap_update_bits(imxpriv->gpr,
+ val,
+ IMX8QM_CTRL_BUTTON_RST_N,
+ IMX8QM_CTRL_BUTTON_RST_N);
+ regmap_update_bits(imxpriv->gpr,
+ val,
+ IMX8QM_CTRL_POWER_UP_RST_N,
+ IMX8QM_CTRL_POWER_UP_RST_N);
+
+ /* PHYX1_MODE to SATA */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_PHYX1_OFFSET,
+ IMX8QM_PHY_MODE_MASK,
+ IMX8QM_PHY_MODE_SATA);
+
+ /*
+ * BIT0 RXENA 1, BIT1 TXENA 0
+ * BIT12 PHY_X1_EPCS_SEL 1.
+ */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_MISC_OFFSET,
+ IMX8QM_MISC_IOB_RXENA,
+ IMX8QM_MISC_IOB_RXENA);
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_MISC_OFFSET,
+ IMX8QM_MISC_IOB_TXENA,
+ 0);
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_MISC_OFFSET,
+ IMX8QM_MISC_PHYX1_EPCS_SEL,
+ IMX8QM_MISC_PHYX1_EPCS_SEL);
+ /*
+ * It is possible, for PCIe and SATA are sharing
+ * the same clock source, HPLL or external oscillator.
+ * When PCIe is in low power modes (L1.X or L2 etc),
+ * the clock source can be turned off. In this case,
+ * if this clock source is required to be toggling by
+ * SATA, then SATA functions will be abnormal.
+ * Set the override here to avoid it.
+ */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_MISC_OFFSET,
+ IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 |
+ IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 |
+ IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 |
+ IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0,
+ IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 |
+ IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 |
+ IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 |
+ IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0);
+
+ /* clear PHY RST, then set it */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_SATA_OFFSET,
+ IMX8QM_SATA_CTRL_EPCS_PHYRESET_N,
+ 0);
+
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_SATA_OFFSET,
+ IMX8QM_SATA_CTRL_EPCS_PHYRESET_N,
+ IMX8QM_SATA_CTRL_EPCS_PHYRESET_N);
+
+ /* CTRL RST: SET -> delay 1 us -> CLEAR -> SET */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_SATA_OFFSET,
+ IMX8QM_SATA_CTRL_RESET_N,
+ IMX8QM_SATA_CTRL_RESET_N);
+ udelay(1);
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_SATA_OFFSET,
+ IMX8QM_SATA_CTRL_RESET_N,
+ 0);
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_SATA_OFFSET,
+ IMX8QM_SATA_CTRL_RESET_N,
+ IMX8QM_SATA_CTRL_RESET_N);
+
+ /* APB reset */
+ regmap_update_bits(imxpriv->gpr,
+ IMX8QM_CSR_PHYX1_OFFSET,
+ IMX8QM_PHY_APB_RSTN_0,
+ IMX8QM_PHY_APB_RSTN_0);
+
+ for (i = 0; i < 100; i++) {
+ reg = IMX8QM_CSR_PHYX1_OFFSET +
+ IMX8QM_CSR_PHYX_STTS0_OFFSET;
+ regmap_read(imxpriv->gpr, reg, &val);
+ val &= IMX8QM_STTS0_LANE0_TX_PLL_LOCK;
+ if (val == IMX8QM_STTS0_LANE0_TX_PLL_LOCK)
+ break;
+ udelay(1);
+ }
+
+ if (val != IMX8QM_STTS0_LANE0_TX_PLL_LOCK) {
+ dev_err(dev, "TX PLL of the PHY is not locked\n");
+ ret = -ENODEV;
+ } else {
+ writeb(imxpriv->imped_ratio, imxpriv->phy_base +
+ IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET);
+ writeb(imxpriv->imped_ratio, imxpriv->phy_base +
+ IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET);
+ reg = readb(imxpriv->phy_base +
+ IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET);
+ if (unlikely(reg != imxpriv->imped_ratio))
+ dev_info(dev, "Can't set PHY RX impedance ratio.\n");
+ reg = readb(imxpriv->phy_base +
+ IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET);
+ if (unlikely(reg != imxpriv->imped_ratio))
+ dev_info(dev, "Can't set PHY TX impedance ratio.\n");
+ usleep_range(50, 100);
+
+ /*
+ * To reduce the power consumption, gate off
+ * the PHY clks
+ */
+ clk_disable_unprepare(imxpriv->phy_apbclk);
+ clk_disable_unprepare(imxpriv->phy_pclk1);
+ clk_disable_unprepare(imxpriv->phy_pclk0);
+ return ret;
+ }
+
+ clk_disable_unprepare(imxpriv->phy_apbclk);
+disable_epcs_rx_clk:
+ clk_disable_unprepare(imxpriv->epcs_rx_clk);
+disable_epcs_tx_clk:
+ clk_disable_unprepare(imxpriv->epcs_tx_clk);
+disable_phy_pclk1:
+ clk_disable_unprepare(imxpriv->phy_pclk1);
+disable_phy_pclk0:
+ clk_disable_unprepare(imxpriv->phy_pclk0);
+
+ return ret;
+}
+
static int imx_sata_enable(struct ahci_host_priv *hpriv)
{
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
@@ -408,7 +671,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
if (ret < 0)
goto disable_regulator;
- if (imxpriv->type == AHCI_IMX6Q) {
+ if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) {
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
@@ -438,6 +701,8 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
dev_err(dev, "failed to reset phy: %d\n", ret);
goto disable_clk;
}
+ } else if (imxpriv->type == AHCI_IMX8QM) {
+ ret = imx8_sata_enable(hpriv);
}
usleep_range(1000, 2000);
@@ -459,10 +724,29 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv)
if (imxpriv->no_device)
return;
- if (imxpriv->type == AHCI_IMX6Q) {
+ switch (imxpriv->type) {
+ case AHCI_IMX6QP:
+ regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+ IMX6Q_GPR5_SATA_SW_PD,
+ IMX6Q_GPR5_SATA_SW_PD);
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+ break;
+
+ case AHCI_IMX6Q:
+ regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+ IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+ !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+ break;
+
+ case AHCI_IMX8QM:
+ clk_disable_unprepare(imxpriv->epcs_rx_clk);
+ clk_disable_unprepare(imxpriv->epcs_tx_clk);
+ break;
+
+ default:
+ break;
}
clk_disable_unprepare(imxpriv->sata_ref_clk);
@@ -513,7 +797,7 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
if (imxpriv->type == AHCI_IMX53)
ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
- else if (imxpriv->type == AHCI_IMX6Q)
+ else
ret = ahci_ops.softreset(link, class, deadline);
return ret;
@@ -536,6 +820,8 @@ static const struct ata_port_info ahci_imx_port_info = {
static const struct of_device_id imx_ahci_of_match[] = {
{ .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
{ .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
+ { .compatible = "fsl,imx6qp-ahci", .data = (void *)AHCI_IMX6QP },
+ { .compatible = "fsl,imx8qm-ahci", .data = (void *)AHCI_IMX8QM },
{},
};
MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
@@ -703,6 +989,79 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
+static int imx8_sata_probe(struct device *dev, struct imx_ahci_priv *imxpriv)
+{
+ int ret;
+ struct resource *phy_res;
+ struct platform_device *pdev = imxpriv->ahci_pdev;
+ struct device_node *np = dev->of_node;
+
+ if (of_property_read_u32(np, "fsl,phy-imp", &imxpriv->imped_ratio))
+ imxpriv->imped_ratio = IMX8QM_SATA_PHY_IMPED_RATIO_85OHM;
+ phy_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+ if (phy_res) {
+ imxpriv->phy_base = devm_ioremap(dev, phy_res->start,
+ resource_size(phy_res));
+ if (!imxpriv->phy_base) {
+ dev_err(dev, "error with ioremap\n");
+ return -ENOMEM;
+ }
+ } else {
+ dev_err(dev, "missing *phy* reg region.\n");
+ return -ENOMEM;
+ }
+ imxpriv->gpr =
+ syscon_regmap_lookup_by_phandle(np, "hsio");
+ if (IS_ERR(imxpriv->gpr)) {
+ dev_err(dev, "unable to find gpr registers\n");
+ return PTR_ERR(imxpriv->gpr);
+ }
+
+ imxpriv->epcs_tx_clk = devm_clk_get(dev, "epcs_tx");
+ if (IS_ERR(imxpriv->epcs_tx_clk)) {
+ dev_err(dev, "can't get epcs_tx_clk clock.\n");
+ return PTR_ERR(imxpriv->epcs_tx_clk);
+ }
+ imxpriv->epcs_rx_clk = devm_clk_get(dev, "epcs_rx");
+ if (IS_ERR(imxpriv->epcs_rx_clk)) {
+ dev_err(dev, "can't get epcs_rx_clk clock.\n");
+ return PTR_ERR(imxpriv->epcs_rx_clk);
+ }
+ imxpriv->phy_pclk0 = devm_clk_get(dev, "phy_pclk0");
+ if (IS_ERR(imxpriv->phy_pclk0)) {
+ dev_err(dev, "can't get phy_pclk0 clock.\n");
+ return PTR_ERR(imxpriv->phy_pclk0);
+ }
+ imxpriv->phy_pclk1 = devm_clk_get(dev, "phy_pclk1");
+ if (IS_ERR(imxpriv->phy_pclk1)) {
+ dev_err(dev, "can't get phy_pclk1 clock.\n");
+ return PTR_ERR(imxpriv->phy_pclk1);
+ }
+ imxpriv->phy_apbclk = devm_clk_get(dev, "phy_apbclk");
+ if (IS_ERR(imxpriv->phy_apbclk)) {
+ dev_err(dev, "can't get phy_apbclk clock.\n");
+ return PTR_ERR(imxpriv->phy_apbclk);
+ }
+
+ /* Fetch GPIO, then enable the external OSC */
+ imxpriv->clkreq_gpio = of_get_named_gpio(np, "clkreq-gpio", 0);
+ if (gpio_is_valid(imxpriv->clkreq_gpio)) {
+ ret = devm_gpio_request_one(dev, imxpriv->clkreq_gpio,
+ GPIOF_OUT_INIT_LOW,
+ "SATA CLKREQ");
+ if (ret == -EBUSY) {
+ dev_info(dev, "clkreq had been initialized.\n");
+ } else if (ret) {
+ dev_err(dev, "%d unable to get clkreq.\n", ret);
+ return ret;
+ }
+ } else if (imxpriv->clkreq_gpio == -EPROBE_DEFER) {
+ return imxpriv->clkreq_gpio;
+ }
+
+ return 0;
+}
+
static int imx_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -743,7 +1102,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
return PTR_ERR(imxpriv->ahb_clk);
}
- if (imxpriv->type == AHCI_IMX6Q) {
+ if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) {
u32 reg_value;
imxpriv->gpr = syscon_regmap_lookup_by_compatible(
@@ -762,6 +1121,10 @@ static int imx_ahci_probe(struct platform_device *pdev)
IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
reg_value;
+ } else if (imxpriv->type == AHCI_IMX8QM) {
+ ret = imx8_sata_probe(dev, imxpriv);
+ if (ret)
+ return ret;
}
hpriv = ahci_platform_get_resources(pdev);
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index 3a62eb246d80..64d848409fe2 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -34,7 +34,8 @@
#define DRV_NAME "tegra-ahci"
#define SATA_CONFIGURATION_0 0x180
-#define SATA_CONFIGURATION_EN_FPCI BIT(0)
+#define SATA_CONFIGURATION_0_EN_FPCI BIT(0)
+#define SATA_CONFIGURATION_0_CLK_OVERRIDE BIT(31)
#define SCFG_OFFSET 0x1000
@@ -45,17 +46,55 @@
#define T_SATA0_CFG_1_SERR BIT(8)
#define T_SATA0_CFG_9 0x24
-#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT 13
+#define T_SATA0_CFG_9_BASE_ADDRESS 0x40020000
#define SATA_FPCI_BAR5 0x94
-#define SATA_FPCI_BAR5_START_SHIFT 4
+#define SATA_FPCI_BAR5_START_MASK (0xfffffff << 4)
+#define SATA_FPCI_BAR5_START (0x0040020 << 4)
+#define SATA_FPCI_BAR5_ACCESS_TYPE (0x1)
#define SATA_INTR_MASK 0x188
#define SATA_INTR_MASK_IP_INT_MASK BIT(16)
+#define T_SATA0_CFG_35 0x94
+#define T_SATA0_CFG_35_IDP_INDEX_MASK (0x7ff << 2)
+#define T_SATA0_CFG_35_IDP_INDEX (0x2a << 2)
+
+#define T_SATA0_AHCI_IDP1 0x98
+#define T_SATA0_AHCI_IDP1_DATA (0x400040)
+
+#define T_SATA0_CFG_PHY_1 0x12c
+#define T_SATA0_CFG_PHY_1_PADS_IDDQ_EN BIT(23)
+#define T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN BIT(22)
+
+#define T_SATA0_NVOOB 0x114
+#define T_SATA0_NVOOB_COMMA_CNT_MASK (0xff << 16)
+#define T_SATA0_NVOOB_COMMA_CNT (0x07 << 16)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK (0x3 << 24)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE (0x1 << 24)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK (0x3 << 26)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH (0x3 << 26)
+
+#define T_SATA_CFG_PHY_0 0x120
+#define T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD BIT(11)
+#define T_SATA_CFG_PHY_0_MASK_SQUELCH BIT(24)
+
+#define T_SATA0_CFG2NVOOB_2 0x134
+#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK (0x1ff << 18)
+#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW (0xc << 18)
+
#define T_SATA0_AHCI_HBA_CAP_BKDR 0x300
+#define T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP BIT(13)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP BIT(14)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SALP BIT(26)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM BIT(17)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SNCQ BIT(30)
#define T_SATA0_BKDOOR_CC 0x4a4
+#define T_SATA0_BKDOOR_CC_CLASS_CODE_MASK (0xffff << 16)
+#define T_SATA0_BKDOOR_CC_CLASS_CODE (0x0106 << 16)
+#define T_SATA0_BKDOOR_CC_PROG_IF_MASK (0xff << 8)
+#define T_SATA0_BKDOOR_CC_PROG_IF (0x01 << 8)
#define T_SATA0_CFG_SATA 0x54c
#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN BIT(12)
@@ -82,6 +121,27 @@
#define T_SATA0_CHX_PHY_CTRL11 0x6d0
#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ (0x2800 << 16)
+#define T_SATA0_CHX_PHY_CTRL17_0 0x6e8
+#define T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1 0x55010000
+#define T_SATA0_CHX_PHY_CTRL18_0 0x6ec
+#define T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2 0x55010000
+#define T_SATA0_CHX_PHY_CTRL20_0 0x6f4
+#define T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1 0x1
+#define T_SATA0_CHX_PHY_CTRL21_0 0x6f8
+#define T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2 0x1
+
+/* AUX Registers */
+#define SATA_AUX_MISC_CNTL_1_0 0x8
+#define SATA_AUX_MISC_CNTL_1_0_DEVSLP_OVERRIDE BIT(17)
+#define SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT BIT(13)
+#define SATA_AUX_MISC_CNTL_1_0_DESO_SUPPORT BIT(15)
+
+#define SATA_AUX_RX_STAT_INT_0 0xc
+#define SATA_AUX_RX_STAT_INT_0_SATA_DEVSLP BIT(7)
+
+#define SATA_AUX_SPARE_CFG0_0 0x18
+#define SATA_AUX_SPARE_CFG0_0_MDAT_TIMER_AFTER_PG_VALID BIT(14)
+
#define FUSE_SATA_CALIB 0x124
#define FUSE_SATA_CALIB_MASK 0x3
@@ -99,23 +159,92 @@ static const struct sata_pad_calibration tegra124_pad_calibration[] = {
{0x14, 0x0e, 0x1a, 0x0e},
};
+struct tegra_ahci_ops {
+ int (*init)(struct ahci_host_priv *hpriv);
+};
+
+struct tegra_ahci_soc {
+ const char *const *supply_names;
+ u32 num_supplies;
+ bool supports_devslp;
+ const struct tegra_ahci_ops *ops;
+};
+
struct tegra_ahci_priv {
struct platform_device *pdev;
void __iomem *sata_regs;
+ void __iomem *sata_aux_regs;
struct reset_control *sata_rst;
struct reset_control *sata_oob_rst;
struct reset_control *sata_cold_rst;
/* Needs special handling, cannot use ahci_platform */
struct clk *sata_clk;
- struct regulator_bulk_data supplies[5];
+ struct regulator_bulk_data *supplies;
+ const struct tegra_ahci_soc *soc;
};
+static void tegra_ahci_handle_quirks(struct ahci_host_priv *hpriv)
+{
+ struct tegra_ahci_priv *tegra = hpriv->plat_data;
+ u32 val;
+
+ if (tegra->sata_aux_regs && !tegra->soc->supports_devslp) {
+ val = readl(tegra->sata_aux_regs + SATA_AUX_MISC_CNTL_1_0);
+ val &= ~SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT;
+ writel(val, tegra->sata_aux_regs + SATA_AUX_MISC_CNTL_1_0);
+ }
+}
+
+static int tegra124_ahci_init(struct ahci_host_priv *hpriv)
+{
+ struct tegra_ahci_priv *tegra = hpriv->plat_data;
+ struct sata_pad_calibration calib;
+ int ret;
+ u32 val;
+
+ /* Pad calibration */
+ ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
+ if (ret)
+ return ret;
+
+ calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
+
+ writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+ val = readl(tegra->sata_regs +
+ SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
+ val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
+ val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
+ val |= calib.gen1_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+ val |= calib.gen1_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+ writel(val, tegra->sata_regs + SCFG_OFFSET +
+ T_SATA0_CHX_PHY_CTRL1_GEN1);
+
+ val = readl(tegra->sata_regs +
+ SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
+ val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
+ val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
+ val |= calib.gen2_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+ val |= calib.gen2_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+ writel(val, tegra->sata_regs + SCFG_OFFSET +
+ T_SATA0_CHX_PHY_CTRL1_GEN2);
+
+ writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
+ tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
+ writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
+ tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
+
+ writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+ return 0;
+}
+
static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
{
struct tegra_ahci_priv *tegra = hpriv->plat_data;
int ret;
- ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies),
+ ret = regulator_bulk_enable(tegra->soc->num_supplies,
tegra->supplies);
if (ret)
return ret;
@@ -144,7 +273,7 @@ disable_power:
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
disable_regulators:
- regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
+ regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
return ret;
}
@@ -162,15 +291,14 @@ static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
clk_disable_unprepare(tegra->sata_clk);
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
- regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
+ regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
}
static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
{
struct tegra_ahci_priv *tegra = hpriv->plat_data;
int ret;
- unsigned int val;
- struct sata_pad_calibration calib;
+ u32 val;
ret = tegra_ahci_power_on(hpriv);
if (ret) {
@@ -179,78 +307,115 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
return ret;
}
+ /*
+ * Program the following SATA IPFS registers to allow SW accesses to
+ * SATA's MMIO register range.
+ */
+ val = readl(tegra->sata_regs + SATA_FPCI_BAR5);
+ val &= ~(SATA_FPCI_BAR5_START_MASK | SATA_FPCI_BAR5_ACCESS_TYPE);
+ val |= SATA_FPCI_BAR5_START | SATA_FPCI_BAR5_ACCESS_TYPE;
+ writel(val, tegra->sata_regs + SATA_FPCI_BAR5);
+
+ /* Program the following SATA IPFS register to enable the SATA */
val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
- val |= SATA_CONFIGURATION_EN_FPCI;
+ val |= SATA_CONFIGURATION_0_EN_FPCI;
writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
- /* Pad calibration */
-
- ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
- if (ret) {
- dev_err(&tegra->pdev->dev,
- "failed to read calibration fuse: %d\n", ret);
- return ret;
- }
-
- calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
-
- writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
-
- val = readl(tegra->sata_regs +
- SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
- val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
- val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
- val |= calib.gen1_tx_amp <<
- T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
- val |= calib.gen1_tx_peak <<
- T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
- writel(val, tegra->sata_regs + SCFG_OFFSET +
- T_SATA0_CHX_PHY_CTRL1_GEN1);
-
- val = readl(tegra->sata_regs +
- SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
- val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
- val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
- val |= calib.gen2_tx_amp <<
- T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
- val |= calib.gen2_tx_peak <<
- T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
- writel(val, tegra->sata_regs + SCFG_OFFSET +
- T_SATA0_CHX_PHY_CTRL1_GEN2);
-
- writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
- tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
- writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
- tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
-
- writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
-
- /* Program controller device ID */
+ /* Electrical settings for better link stability */
+ val = T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL17_0);
+ val = T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL18_0);
+ val = T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL20_0);
+ val = T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL21_0);
+
+ /* For SQUELCH Filter & Gen3 drive getting detected as Gen1 drive */
+
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
+ val |= T_SATA_CFG_PHY_0_MASK_SQUELCH;
+ val &= ~T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
+
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
+ val &= ~(T_SATA0_NVOOB_COMMA_CNT_MASK |
+ T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK |
+ T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK);
+ val |= (T_SATA0_NVOOB_COMMA_CNT |
+ T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH |
+ T_SATA0_NVOOB_SQUELCH_FILTER_MODE);
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
+
+ /*
+ * Change CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW from 83.3 ns to 58.8ns
+ */
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
+ val &= ~T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK;
+ val |= T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
+
+ if (tegra->soc->ops && tegra->soc->ops->init)
+ tegra->soc->ops->init(hpriv);
+
+ /*
+ * Program the following SATA configuration registers to
+ * initialize SATA
+ */
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+ val |= (T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
+ T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR);
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+ val = T_SATA0_CFG_9_BASE_ADDRESS;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
+ /* Program Class Code and Programming interface for SATA */
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
- writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+ val &=
+ ~(T_SATA0_BKDOOR_CC_CLASS_CODE_MASK |
+ T_SATA0_BKDOOR_CC_PROG_IF_MASK);
+ val |= T_SATA0_BKDOOR_CC_CLASS_CODE | T_SATA0_BKDOOR_CC_PROG_IF;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
- /* Enable IO & memory access, bus master mode */
-
- val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
- val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
- T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
- writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
-
- /* Program SATA MMIO */
-
- writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
- tegra->sata_regs + SATA_FPCI_BAR5);
+ /* Enabling LPM capabilities through Backdoor Programming */
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
+ val |= (T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP |
+ T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP |
+ T_SATA0_AHCI_HBA_CAP_BKDR_SALP |
+ T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM);
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
+
+ /* SATA Second Level Clock Gating configuration
+ * Enabling Gating of Tx/Rx clocks and driving Pad IDDQ and Lane
+ * IDDQ Signals
+ */
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
+ val &= ~T_SATA0_CFG_35_IDP_INDEX_MASK;
+ val |= T_SATA0_CFG_35_IDP_INDEX;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
+
+ val = T_SATA0_AHCI_IDP1_DATA;
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_IDP1);
+
+ val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
+ val |= (T_SATA0_CFG_PHY_1_PADS_IDDQ_EN |
+ T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN);
+ writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
+
+ /* Enabling IPFS Clock Gating */
+ val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
+ val &= ~SATA_CONFIGURATION_0_CLK_OVERRIDE;
+ writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
- writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
- tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
+ tegra_ahci_handle_quirks(hpriv);
/* Unmask SATA interrupts */
@@ -279,14 +444,40 @@ static struct ata_port_operations ahci_tegra_port_ops = {
};
static const struct ata_port_info ahci_tegra_port_info = {
- .flags = AHCI_FLAG_COMMON,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_tegra_port_ops,
};
+static const char *const tegra124_supply_names[] = {
+ "avdd", "hvdd", "vddio", "target-5v", "target-12v"
+};
+
+static const struct tegra_ahci_ops tegra124_ahci_ops = {
+ .init = tegra124_ahci_init,
+};
+
+static const struct tegra_ahci_soc tegra124_ahci_soc = {
+ .supply_names = tegra124_supply_names,
+ .num_supplies = ARRAY_SIZE(tegra124_supply_names),
+ .supports_devslp = false,
+ .ops = &tegra124_ahci_ops,
+};
+
+static const struct tegra_ahci_soc tegra210_ahci_soc = {
+ .supports_devslp = false,
+};
+
static const struct of_device_id tegra_ahci_of_match[] = {
- { .compatible = "nvidia,tegra124-ahci" },
+ {
+ .compatible = "nvidia,tegra124-ahci",
+ .data = &tegra124_ahci_soc
+ },
+ {
+ .compatible = "nvidia,tegra210-ahci",
+ .data = &tegra210_ahci_soc
+ },
{}
};
MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
@@ -301,6 +492,7 @@ static int tegra_ahci_probe(struct platform_device *pdev)
struct tegra_ahci_priv *tegra;
struct resource *res;
int ret;
+ unsigned int i;
hpriv = ahci_platform_get_resources(pdev);
if (IS_ERR(hpriv))
@@ -313,12 +505,23 @@ static int tegra_ahci_probe(struct platform_device *pdev)
hpriv->plat_data = tegra;
tegra->pdev = pdev;
+ tegra->soc = of_device_get_match_data(&pdev->dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(tegra->sata_regs))
return PTR_ERR(tegra->sata_regs);
+ /*
+ * AUX registers is optional.
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ if (res) {
+ tegra->sata_aux_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra->sata_aux_regs))
+ return PTR_ERR(tegra->sata_aux_regs);
+ }
+
tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
if (IS_ERR(tegra->sata_rst)) {
dev_err(&pdev->dev, "Failed to get sata reset\n");
@@ -343,13 +546,17 @@ static int tegra_ahci_probe(struct platform_device *pdev)
return PTR_ERR(tegra->sata_clk);
}
- tegra->supplies[0].supply = "avdd";
- tegra->supplies[1].supply = "hvdd";
- tegra->supplies[2].supply = "vddio";
- tegra->supplies[3].supply = "target-5v";
- tegra->supplies[4].supply = "target-12v";
+ tegra->supplies = devm_kcalloc(&pdev->dev,
+ tegra->soc->num_supplies,
+ sizeof(*tegra->supplies), GFP_KERNEL);
+ if (!tegra->supplies)
+ return -ENOMEM;
+
+ for (i = 0; i < tegra->soc->num_supplies; i++)
+ tegra->supplies[i].supply = tegra->soc->supply_names[i];
- ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies),
+ ret = devm_regulator_bulk_get(&pdev->dev,
+ tegra->soc->num_supplies,
tegra->supplies);
if (ret) {
dev_err(&pdev->dev, "Failed to get regulators\n");
@@ -385,5 +592,5 @@ static struct platform_driver tegra_ahci_driver = {
module_platform_driver(tegra_ahci_driver);
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
-MODULE_DESCRIPTION("Tegra124 AHCI SATA driver");
+MODULE_DESCRIPTION("Tegra AHCI SATA driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index a0de7a38430c..7adcf3caabd0 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -665,6 +665,16 @@ int ahci_stop_engine(struct ata_port *ap)
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
return 0;
+ /*
+ * Don't try to issue commands but return with ENODEV if the
+ * AHCI controller not available anymore (e.g. due to PCIe hot
+ * unplugging). Otherwise a 500ms delay for each port is added.
+ */
+ if (tmp == 0xffffffff) {
+ dev_err(ap->host->dev, "AHCI controller unavailable!\n");
+ return -ENODEV;
+ }
+
/* setting HBA to idle */
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 341d0ef82cbd..46a762442dc5 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -25,6 +25,7 @@
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/of_platform.h>
+#include <linux/reset.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -195,7 +196,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
* following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phys
+ * 3) Resets
+ * 4) Phys
*
* If resource enabling fails at any point the previous enabled resources
* are disabled in reverse order.
@@ -215,12 +217,19 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
if (rc)
goto disable_regulator;
- rc = ahci_platform_enable_phys(hpriv);
+ rc = reset_control_deassert(hpriv->rsts);
if (rc)
goto disable_clks;
+ rc = ahci_platform_enable_phys(hpriv);
+ if (rc)
+ goto disable_resets;
+
return 0;
+disable_resets:
+ reset_control_assert(hpriv->rsts);
+
disable_clks:
ahci_platform_disable_clks(hpriv);
@@ -239,12 +248,15 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
* following order:
* 1) Phys
* 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
+ * 3) Resets
+ * 4) Regulator
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
ahci_platform_disable_phys(hpriv);
+ reset_control_assert(hpriv->rsts);
+
ahci_platform_disable_clks(hpriv);
ahci_platform_disable_regulators(hpriv);
@@ -340,7 +352,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
- * 4) phys (optional)
+ * 4) phys (optional)
*
* RETURNS:
* The allocated ahci_host_priv on success, otherwise an ERR_PTR value
@@ -393,6 +405,12 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
+ hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
+ if (IS_ERR(hpriv->rsts)) {
+ rc = PTR_ERR(hpriv->rsts);
+ goto err_out;
+ }
+
hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
/*
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3c09122bf038..8bc71ca61e7f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4530,6 +4530,25 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
+ /* Crucial BX100 SSD 500GB has broken LPM support */
+ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },
+
+ /* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
+ { "Crucial_CT512MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+ /* 512GB MX100 with newer firmware has only LPM issues */
+ { "Crucial_CT512MX100*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+
+ /* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
+ { "Crucial_CT480M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+ { "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+
/* devices that don't properly handle queued TRIM commands */
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4541,7 +4560,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ { "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -5219,7 +5240,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
/* Trigger the LED (if available) */
- ledtrig_disk_activity();
+ ledtrig_disk_activity(!!(qc->tf.flags & ATA_TFLAG_WRITE));
/* XXX: New EH and old EH use different mechanisms to
* synchronize EH with regular execution path.
@@ -5401,8 +5422,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
* We guarantee to LLDs that they will have at least one
* non-zero sg if the command is a data command.
*/
- if (WARN_ON_ONCE(ata_is_data(prot) &&
- (!qc->sg || !qc->n_elem || !qc->nbytes)))
+ if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
goto sys_err;
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
@@ -6006,7 +6026,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
return ap;
}
-static void ata_host_release(struct device *gendev, void *res)
+static void ata_devres_release(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
int i;
@@ -6020,13 +6040,36 @@ static void ata_host_release(struct device *gendev, void *res)
if (ap->scsi_host)
scsi_host_put(ap->scsi_host);
+ }
+
+ dev_set_drvdata(gendev, NULL);
+ ata_host_put(host);
+}
+
+static void ata_host_release(struct kref *kref)
+{
+ struct ata_host *host = container_of(kref, struct ata_host, kref);
+ int i;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
kfree(ap->pmp_link);
kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
+ kfree(host);
+}
- dev_set_drvdata(gendev, NULL);
+void ata_host_get(struct ata_host *host)
+{
+ kref_get(&host->kref);
+}
+
+void ata_host_put(struct ata_host *host)
+{
+ kref_put(&host->kref, ata_host_release);
}
/**
@@ -6054,26 +6097,31 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
struct ata_host *host;
size_t sz;
int i;
+ void *dr;
DPRINTK("ENTER\n");
- if (!devres_open_group(dev, NULL, GFP_KERNEL))
- return NULL;
-
/* alloc a container for our list of ATA ports (buses) */
sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
- /* alloc a container for our list of ATA ports (buses) */
- host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
+ host = kzalloc(sz, GFP_KERNEL);
if (!host)
+ return NULL;
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ goto err_free;
+
+ dr = devres_alloc(ata_devres_release, 0, GFP_KERNEL);
+ if (!dr)
goto err_out;
- devres_add(dev, host);
+ devres_add(dev, dr);
dev_set_drvdata(dev, host);
spin_lock_init(&host->lock);
mutex_init(&host->eh_mutex);
host->dev = dev;
host->n_ports = max_ports;
+ kref_init(&host->kref);
/* allocate ports bound to this host */
for (i = 0; i < max_ports; i++) {
@@ -6092,6 +6140,8 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
err_out:
devres_release_group(dev, NULL);
+ err_free:
+ kfree(host);
return NULL;
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 11c3137d7b0a..c016829a38fd 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -815,7 +815,8 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
if (ap->pflags & ATA_PFLAG_LOADING)
ap->pflags &= ~ATA_PFLAG_LOADING;
- else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG)
+ else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
+ !(ap->flags & ATA_FLAG_SAS_HOST))
schedule_delayed_work(&ap->hotplug_task, 0);
if (ap->pflags & ATA_PFLAG_RECOVERED)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 66be961c93a4..89a9d4a2efc8 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3316,6 +3316,12 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
goto invalid_fld;
}
+ /* We may not issue NCQ commands to devices not supporting NCQ */
+ if (ata_is_ncq(tf->protocol) && !ata_ncq_enabled(dev)) {
+ fp = 1;
+ goto invalid_fld;
+ }
+
/* sanity check for pio multi commands */
if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) {
fp = 1;
@@ -4282,7 +4288,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
#ifdef ATA_DEBUG
struct scsi_device *scsidev = cmd->device;
- DPRINTK("CDB (%u:%d,%d,%d) %9ph\n",
+ DPRINTK("CDB (%u:%d,%d,%lld) %9ph\n",
ap->print_id,
scsidev->channel, scsidev->id, scsidev->lun,
cmd->cmnd);
@@ -4309,7 +4315,9 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
/* relay SCSI command to ATAPI device */
int len = COMMAND_SIZE(scsi_op);
- if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
+ if (unlikely(len > scmd->cmd_len ||
+ len > dev->cdb_len ||
+ scmd->cmd_len > ATAPI_CDB_LEN))
goto bad_cdb_len;
xlat_func = atapi_xlat;
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 19e6e539a061..a0b0b4d986f2 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -224,6 +224,8 @@ static DECLARE_TRANSPORT_CLASS(ata_port_class,
static void ata_tport_release(struct device *dev)
{
+ struct ata_port *ap = tdev_to_port(dev);
+ ata_host_put(ap->host);
}
/**
@@ -284,6 +286,7 @@ int ata_tport_add(struct device *parent,
dev->type = &ata_port_type;
dev->parent = parent;
+ ata_host_get(ap->host);
dev->release = ata_tport_release;
dev_set_name(dev, "ata%d", ap->print_id);
transport_setup_device(dev);
@@ -314,6 +317,7 @@ int ata_tport_add(struct device *parent,
tport_err:
transport_destroy_device(dev);
put_device(dev);
+ ata_host_put(ap->host);
return error;
}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index f953cb4bb1ba..9e21c49cf6be 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -100,6 +100,8 @@ extern int ata_port_probe(struct ata_port *ap);
extern void __ata_port_probe(struct ata_port *ap);
extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
u8 page, void *buf, unsigned int sectors);
+extern void ata_host_get(struct ata_host *host);
+extern void ata_host_put(struct ata_host *host);
#define to_ata_port(d) container_of(d, struct ata_port, tdev)
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index b4d54771c9fe..ebecab8c3f36 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -796,7 +796,7 @@ static int arasan_cf_probe(struct platform_device *pdev)
struct resource *res;
u32 quirk;
irq_handler_t irq_handler = NULL;
- int ret = 0;
+ int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -809,10 +809,8 @@ static int arasan_cf_probe(struct platform_device *pdev)
}
acdev = devm_kzalloc(&pdev->dev, sizeof(*acdev), GFP_KERNEL);
- if (!acdev) {
- dev_warn(&pdev->dev, "kzalloc fail\n");
+ if (!acdev)
return -ENOMEM;
- }
if (pdata)
quirk = pdata->quirk;
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
deleted file mode 100644
index 0e55a8da2748..000000000000
--- a/drivers/ata/pata_bf54x.c
+++ /dev/null
@@ -1,1703 +0,0 @@
-/*
- * File: drivers/ata/pata_bf54x.c
- * Author: Sonic Zhang <sonic.zhang@analog.com>
- *
- * Created:
- * Description: PATA Driver for blackfin 54x
- *
- * Modified:
- * Copyright 2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define DRV_NAME "pata-bf54x"
-#define DRV_VERSION "0.9"
-
-#define ATA_REG_CTRL 0x0E
-#define ATA_REG_ALTSTATUS ATA_REG_CTRL
-
-/* These are the offset of the controller's registers */
-#define ATAPI_OFFSET_CONTROL 0x00
-#define ATAPI_OFFSET_STATUS 0x04
-#define ATAPI_OFFSET_DEV_ADDR 0x08
-#define ATAPI_OFFSET_DEV_TXBUF 0x0c
-#define ATAPI_OFFSET_DEV_RXBUF 0x10
-#define ATAPI_OFFSET_INT_MASK 0x14
-#define ATAPI_OFFSET_INT_STATUS 0x18
-#define ATAPI_OFFSET_XFER_LEN 0x1c
-#define ATAPI_OFFSET_LINE_STATUS 0x20
-#define ATAPI_OFFSET_SM_STATE 0x24
-#define ATAPI_OFFSET_TERMINATE 0x28
-#define ATAPI_OFFSET_PIO_TFRCNT 0x2c
-#define ATAPI_OFFSET_DMA_TFRCNT 0x30
-#define ATAPI_OFFSET_UMAIN_TFRCNT 0x34
-#define ATAPI_OFFSET_UDMAOUT_TFRCNT 0x38
-#define ATAPI_OFFSET_REG_TIM_0 0x40
-#define ATAPI_OFFSET_PIO_TIM_0 0x44
-#define ATAPI_OFFSET_PIO_TIM_1 0x48
-#define ATAPI_OFFSET_MULTI_TIM_0 0x50
-#define ATAPI_OFFSET_MULTI_TIM_1 0x54
-#define ATAPI_OFFSET_MULTI_TIM_2 0x58
-#define ATAPI_OFFSET_ULTRA_TIM_0 0x60
-#define ATAPI_OFFSET_ULTRA_TIM_1 0x64
-#define ATAPI_OFFSET_ULTRA_TIM_2 0x68
-#define ATAPI_OFFSET_ULTRA_TIM_3 0x6c
-
-
-#define ATAPI_GET_CONTROL(base)\
- bfin_read16(base + ATAPI_OFFSET_CONTROL)
-#define ATAPI_SET_CONTROL(base, val)\
- bfin_write16(base + ATAPI_OFFSET_CONTROL, val)
-#define ATAPI_GET_STATUS(base)\
- bfin_read16(base + ATAPI_OFFSET_STATUS)
-#define ATAPI_GET_DEV_ADDR(base)\
- bfin_read16(base + ATAPI_OFFSET_DEV_ADDR)
-#define ATAPI_SET_DEV_ADDR(base, val)\
- bfin_write16(base + ATAPI_OFFSET_DEV_ADDR, val)
-#define ATAPI_GET_DEV_TXBUF(base)\
- bfin_read16(base + ATAPI_OFFSET_DEV_TXBUF)
-#define ATAPI_SET_DEV_TXBUF(base, val)\
- bfin_write16(base + ATAPI_OFFSET_DEV_TXBUF, val)
-#define ATAPI_GET_DEV_RXBUF(base)\
- bfin_read16(base + ATAPI_OFFSET_DEV_RXBUF)
-#define ATAPI_SET_DEV_RXBUF(base, val)\
- bfin_write16(base + ATAPI_OFFSET_DEV_RXBUF, val)
-#define ATAPI_GET_INT_MASK(base)\
- bfin_read16(base + ATAPI_OFFSET_INT_MASK)
-#define ATAPI_SET_INT_MASK(base, val)\
- bfin_write16(base + ATAPI_OFFSET_INT_MASK, val)
-#define ATAPI_GET_INT_STATUS(base)\
- bfin_read16(base + ATAPI_OFFSET_INT_STATUS)
-#define ATAPI_SET_INT_STATUS(base, val)\
- bfin_write16(base + ATAPI_OFFSET_INT_STATUS, val)
-#define ATAPI_GET_XFER_LEN(base)\
- bfin_read16(base + ATAPI_OFFSET_XFER_LEN)
-#define ATAPI_SET_XFER_LEN(base, val)\
- bfin_write16(base + ATAPI_OFFSET_XFER_LEN, val)
-#define ATAPI_GET_LINE_STATUS(base)\
- bfin_read16(base + ATAPI_OFFSET_LINE_STATUS)
-#define ATAPI_GET_SM_STATE(base)\
- bfin_read16(base + ATAPI_OFFSET_SM_STATE)
-#define ATAPI_GET_TERMINATE(base)\
- bfin_read16(base + ATAPI_OFFSET_TERMINATE)
-#define ATAPI_SET_TERMINATE(base, val)\
- bfin_write16(base + ATAPI_OFFSET_TERMINATE, val)
-#define ATAPI_GET_PIO_TFRCNT(base)\
- bfin_read16(base + ATAPI_OFFSET_PIO_TFRCNT)
-#define ATAPI_GET_DMA_TFRCNT(base)\
- bfin_read16(base + ATAPI_OFFSET_DMA_TFRCNT)
-#define ATAPI_GET_UMAIN_TFRCNT(base)\
- bfin_read16(base + ATAPI_OFFSET_UMAIN_TFRCNT)
-#define ATAPI_GET_UDMAOUT_TFRCNT(base)\
- bfin_read16(base + ATAPI_OFFSET_UDMAOUT_TFRCNT)
-#define ATAPI_GET_REG_TIM_0(base)\
- bfin_read16(base + ATAPI_OFFSET_REG_TIM_0)
-#define ATAPI_SET_REG_TIM_0(base, val)\
- bfin_write16(base + ATAPI_OFFSET_REG_TIM_0, val)
-#define ATAPI_GET_PIO_TIM_0(base)\
- bfin_read16(base + ATAPI_OFFSET_PIO_TIM_0)
-#define ATAPI_SET_PIO_TIM_0(base, val)\
- bfin_write16(base + ATAPI_OFFSET_PIO_TIM_0, val)
-#define ATAPI_GET_PIO_TIM_1(base)\
- bfin_read16(base + ATAPI_OFFSET_PIO_TIM_1)
-#define ATAPI_SET_PIO_TIM_1(base, val)\
- bfin_write16(base + ATAPI_OFFSET_PIO_TIM_1, val)
-#define ATAPI_GET_MULTI_TIM_0(base)\
- bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_0)
-#define ATAPI_SET_MULTI_TIM_0(base, val)\
- bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_0, val)
-#define ATAPI_GET_MULTI_TIM_1(base)\
- bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_1)
-#define ATAPI_SET_MULTI_TIM_1(base, val)\
- bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_1, val)
-#define ATAPI_GET_MULTI_TIM_2(base)\
- bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_2)
-#define ATAPI_SET_MULTI_TIM_2(base, val)\
- bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_2, val)
-#define ATAPI_GET_ULTRA_TIM_0(base)\
- bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_0)
-#define ATAPI_SET_ULTRA_TIM_0(base, val)\
- bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_0, val)
-#define ATAPI_GET_ULTRA_TIM_1(base)\
- bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_1)
-#define ATAPI_SET_ULTRA_TIM_1(base, val)\
- bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_1, val)
-#define ATAPI_GET_ULTRA_TIM_2(base)\
- bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_2)
-#define ATAPI_SET_ULTRA_TIM_2(base, val)\
- bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_2, val)
-#define ATAPI_GET_ULTRA_TIM_3(base)\
- bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_3)
-#define ATAPI_SET_ULTRA_TIM_3(base, val)\
- bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_3, val)
-
-/**
- * PIO Mode - Frequency compatibility
- */
-/* mode: 0 1 2 3 4 */
-static const u32 pio_fsclk[] =
-{ 33333333, 33333333, 33333333, 33333333, 33333333 };
-
-/**
- * MDMA Mode - Frequency compatibility
- */
-/* mode: 0 1 2 */
-static const u32 mdma_fsclk[] = { 33333333, 33333333, 33333333 };
-
-/**
- * UDMA Mode - Frequency compatibility
- *
- * UDMA5 - 100 MB/s - SCLK = 133 MHz
- * UDMA4 - 66 MB/s - SCLK >= 80 MHz
- * UDMA3 - 44.4 MB/s - SCLK >= 50 MHz
- * UDMA2 - 33 MB/s - SCLK >= 40 MHz
- */
-/* mode: 0 1 2 3 4 5 */
-static const u32 udma_fsclk[] =
-{ 33333333, 33333333, 40000000, 50000000, 80000000, 133333333 };
-
-/**
- * Register transfer timing table
- */
-/* mode: 0 1 2 3 4 */
-/* Cycle Time */
-static const u32 reg_t0min[] = { 600, 383, 330, 180, 120 };
-/* DIOR/DIOW to end cycle */
-static const u32 reg_t2min[] = { 290, 290, 290, 70, 25 };
-/* DIOR/DIOW asserted pulse width */
-static const u32 reg_teocmin[] = { 290, 290, 290, 80, 70 };
-
-/**
- * PIO timing table
- */
-/* mode: 0 1 2 3 4 */
-/* Cycle Time */
-static const u32 pio_t0min[] = { 600, 383, 240, 180, 120 };
-/* Address valid to DIOR/DIORW */
-static const u32 pio_t1min[] = { 70, 50, 30, 30, 25 };
-/* DIOR/DIOW to end cycle */
-static const u32 pio_t2min[] = { 165, 125, 100, 80, 70 };
-/* DIOR/DIOW asserted pulse width */
-static const u32 pio_teocmin[] = { 165, 125, 100, 70, 25 };
-/* DIOW data hold */
-static const u32 pio_t4min[] = { 30, 20, 15, 10, 10 };
-
-/* ******************************************************************
- * Multiword DMA timing table
- * ******************************************************************
- */
-/* mode: 0 1 2 */
-/* Cycle Time */
-static const u32 mdma_t0min[] = { 480, 150, 120 };
-/* DIOR/DIOW asserted pulse width */
-static const u32 mdma_tdmin[] = { 215, 80, 70 };
-/* DMACK to read data released */
-static const u32 mdma_thmin[] = { 20, 15, 10 };
-/* DIOR/DIOW to DMACK hold */
-static const u32 mdma_tjmin[] = { 20, 5, 5 };
-/* DIOR negated pulse width */
-static const u32 mdma_tkrmin[] = { 50, 50, 25 };
-/* DIOR negated pulse width */
-static const u32 mdma_tkwmin[] = { 215, 50, 25 };
-/* CS[1:0] valid to DIOR/DIOW */
-static const u32 mdma_tmmin[] = { 50, 30, 25 };
-/* DMACK to read data released */
-static const u32 mdma_tzmax[] = { 20, 25, 25 };
-
-/**
- * Ultra DMA timing table
- */
-/* mode: 0 1 2 3 4 5 */
-static const u32 udma_tcycmin[] = { 112, 73, 54, 39, 25, 17 };
-static const u32 udma_tdvsmin[] = { 70, 48, 31, 20, 7, 5 };
-static const u32 udma_tenvmax[] = { 70, 70, 70, 55, 55, 50 };
-static const u32 udma_trpmin[] = { 160, 125, 100, 100, 100, 85 };
-static const u32 udma_tmin[] = { 5, 5, 5, 5, 3, 3 };
-
-
-static const u32 udma_tmlimin = 20;
-static const u32 udma_tzahmin = 20;
-static const u32 udma_tenvmin = 20;
-static const u32 udma_tackmin = 20;
-static const u32 udma_tssmin = 50;
-
-#define BFIN_MAX_SG_SEGMENTS 4
-
-/**
- *
- * Function: num_clocks_min
- *
- * Description:
- * calculate number of SCLK cycles to meet minimum timing
- */
-static unsigned short num_clocks_min(unsigned long tmin,
- unsigned long fsclk)
-{
- unsigned long tmp ;
- unsigned short result;
-
- tmp = tmin * (fsclk/1000/1000) / 1000;
- result = (unsigned short)tmp;
- if ((tmp*1000*1000) < (tmin*(fsclk/1000))) {
- result++;
- }
-
- return result;
-}
-
-/**
- * bfin_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- int mode = adev->pio_mode - XFER_PIO_0;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned int fsclk = get_sclk();
- unsigned short teoc_reg, t2_reg, teoc_pio;
- unsigned short t4_reg, t2_pio, t1_reg;
- unsigned short n0, n6, t6min = 5;
-
- /* the most restrictive timing value is t6 and tc, the DIOW - data hold
- * If one SCLK pulse is longer than this minimum value then register
- * transfers cannot be supported at this frequency.
- */
- n6 = num_clocks_min(t6min, fsclk);
- if (mode >= 0 && mode <= 4 && n6 >= 1) {
- dev_dbg(adev->link->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
- /* calculate the timing values for register transfers. */
- while (mode > 0 && pio_fsclk[mode] > fsclk)
- mode--;
-
- /* DIOR/DIOW to end cycle time */
- t2_reg = num_clocks_min(reg_t2min[mode], fsclk);
- /* DIOR/DIOW asserted pulse width */
- teoc_reg = num_clocks_min(reg_teocmin[mode], fsclk);
- /* Cycle Time */
- n0 = num_clocks_min(reg_t0min[mode], fsclk);
-
- /* increase t2 until we meed the minimum cycle length */
- if (t2_reg + teoc_reg < n0)
- t2_reg = n0 - teoc_reg;
-
- /* calculate the timing values for pio transfers. */
-
- /* DIOR/DIOW to end cycle time */
- t2_pio = num_clocks_min(pio_t2min[mode], fsclk);
- /* DIOR/DIOW asserted pulse width */
- teoc_pio = num_clocks_min(pio_teocmin[mode], fsclk);
- /* Cycle Time */
- n0 = num_clocks_min(pio_t0min[mode], fsclk);
-
- /* increase t2 until we meed the minimum cycle length */
- if (t2_pio + teoc_pio < n0)
- t2_pio = n0 - teoc_pio;
-
- /* Address valid to DIOR/DIORW */
- t1_reg = num_clocks_min(pio_t1min[mode], fsclk);
-
- /* DIOW data hold */
- t4_reg = num_clocks_min(pio_t4min[mode], fsclk);
-
- ATAPI_SET_REG_TIM_0(base, (teoc_reg<<8 | t2_reg));
- ATAPI_SET_PIO_TIM_0(base, (t4_reg<<12 | t2_pio<<4 | t1_reg));
- ATAPI_SET_PIO_TIM_1(base, teoc_pio);
- if (mode > 2) {
- ATAPI_SET_CONTROL(base,
- ATAPI_GET_CONTROL(base) | IORDY_EN);
- } else {
- ATAPI_SET_CONTROL(base,
- ATAPI_GET_CONTROL(base) & ~IORDY_EN);
- }
-
- /* Disable host ATAPI PIO interrupts */
- ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base)
- & ~(PIO_DONE_MASK | HOST_TERM_XFER_MASK));
- SSYNC();
- }
-}
-
-/**
- * bfin_set_dmamode - Initialize host controller PATA DMA timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set UDMA mode for device.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
- int mode;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned long fsclk = get_sclk();
- unsigned short tenv, tack, tcyc_tdvs, tdvs, tmli, tss, trp, tzah;
- unsigned short tm, td, tkr, tkw, teoc, th;
- unsigned short n0, nf, tfmin = 5;
- unsigned short nmin, tcyc;
-
- mode = adev->dma_mode - XFER_UDMA_0;
- if (mode >= 0 && mode <= 5) {
- dev_dbg(adev->link->ap->dev, "set udmamode: mode=%d\n", mode);
- /* the most restrictive timing value is t6 and tc,
- * the DIOW - data hold. If one SCLK pulse is longer
- * than this minimum value then register
- * transfers cannot be supported at this frequency.
- */
- while (mode > 0 && udma_fsclk[mode] > fsclk)
- mode--;
-
- nmin = num_clocks_min(udma_tmin[mode], fsclk);
- if (nmin >= 1) {
- /* calculate the timing values for Ultra DMA. */
- tdvs = num_clocks_min(udma_tdvsmin[mode], fsclk);
- tcyc = num_clocks_min(udma_tcycmin[mode], fsclk);
- tcyc_tdvs = 2;
-
- /* increase tcyc - tdvs (tcyc_tdvs) until we meed
- * the minimum cycle length
- */
- if (tdvs + tcyc_tdvs < tcyc)
- tcyc_tdvs = tcyc - tdvs;
-
- /* Mow assign the values required for the timing
- * registers
- */
- if (tcyc_tdvs < 2)
- tcyc_tdvs = 2;
-
- if (tdvs < 2)
- tdvs = 2;
-
- tack = num_clocks_min(udma_tackmin, fsclk);
- tss = num_clocks_min(udma_tssmin, fsclk);
- tmli = num_clocks_min(udma_tmlimin, fsclk);
- tzah = num_clocks_min(udma_tzahmin, fsclk);
- trp = num_clocks_min(udma_trpmin[mode], fsclk);
- tenv = num_clocks_min(udma_tenvmin, fsclk);
- if (tenv <= udma_tenvmax[mode]) {
- ATAPI_SET_ULTRA_TIM_0(base, (tenv<<8 | tack));
- ATAPI_SET_ULTRA_TIM_1(base,
- (tcyc_tdvs<<8 | tdvs));
- ATAPI_SET_ULTRA_TIM_2(base, (tmli<<8 | tss));
- ATAPI_SET_ULTRA_TIM_3(base, (trp<<8 | tzah));
- }
- }
- }
-
- mode = adev->dma_mode - XFER_MW_DMA_0;
- if (mode >= 0 && mode <= 2) {
- dev_dbg(adev->link->ap->dev, "set mdmamode: mode=%d\n", mode);
- /* the most restrictive timing value is tf, the DMACK to
- * read data released. If one SCLK pulse is longer than
- * this maximum value then the MDMA mode
- * cannot be supported at this frequency.
- */
- while (mode > 0 && mdma_fsclk[mode] > fsclk)
- mode--;
-
- nf = num_clocks_min(tfmin, fsclk);
- if (nf >= 1) {
- /* calculate the timing values for Multi-word DMA. */
-
- /* DIOR/DIOW asserted pulse width */
- td = num_clocks_min(mdma_tdmin[mode], fsclk);
-
- /* DIOR negated pulse width */
- tkw = num_clocks_min(mdma_tkwmin[mode], fsclk);
-
- /* Cycle Time */
- n0 = num_clocks_min(mdma_t0min[mode], fsclk);
-
- /* increase tk until we meed the minimum cycle length */
- if (tkw + td < n0)
- tkw = n0 - td;
-
- /* DIOR negated pulse width - read */
- tkr = num_clocks_min(mdma_tkrmin[mode], fsclk);
- /* CS{1:0] valid to DIOR/DIOW */
- tm = num_clocks_min(mdma_tmmin[mode], fsclk);
- /* DIOR/DIOW to DMACK hold */
- teoc = num_clocks_min(mdma_tjmin[mode], fsclk);
- /* DIOW Data hold */
- th = num_clocks_min(mdma_thmin[mode], fsclk);
-
- ATAPI_SET_MULTI_TIM_0(base, (tm<<8 | td));
- ATAPI_SET_MULTI_TIM_1(base, (tkr<<8 | tkw));
- ATAPI_SET_MULTI_TIM_2(base, (teoc<<8 | th));
- SSYNC();
- }
- }
- return;
-}
-
-/**
- *
- * Function: wait_complete
- *
- * Description: Waits the interrupt from device
- *
- */
-static inline void wait_complete(void __iomem *base, unsigned short mask)
-{
- unsigned short status;
- unsigned int i = 0;
-
-#define PATA_BF54X_WAIT_TIMEOUT 10000
-
- for (i = 0; i < PATA_BF54X_WAIT_TIMEOUT; i++) {
- status = ATAPI_GET_INT_STATUS(base) & mask;
- if (status)
- break;
- }
-
- ATAPI_SET_INT_STATUS(base, mask);
-}
-
-/**
- *
- * Function: write_atapi_register
- *
- * Description: Writes to ATA Device Resgister
- *
- */
-
-static void write_atapi_register(void __iomem *base,
- unsigned long ata_reg, unsigned short value)
-{
- /* Program the ATA_DEV_TXBUF register with write data (to be
- * written into the device).
- */
- ATAPI_SET_DEV_TXBUF(base, value);
-
- /* Program the ATA_DEV_ADDR register with address of the
- * device register (0x01 to 0x0F).
- */
- ATAPI_SET_DEV_ADDR(base, ata_reg);
-
- /* Program the ATA_CTRL register with dir set to write (1)
- */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR));
-
- /* ensure PIO DMA is not set */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
-
- /* and start the transfer */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
-
- /* Wait for the interrupt to indicate the end of the transfer.
- * (We need to wait on and clear rhe ATA_DEV_INT interrupt status)
- */
- wait_complete(base, PIO_DONE_INT);
-}
-
-/**
- *
- * Function: read_atapi_register
- *
- *Description: Reads from ATA Device Resgister
- *
- */
-
-static unsigned short read_atapi_register(void __iomem *base,
- unsigned long ata_reg)
-{
- /* Program the ATA_DEV_ADDR register with address of the
- * device register (0x01 to 0x0F).
- */
- ATAPI_SET_DEV_ADDR(base, ata_reg);
-
- /* Program the ATA_CTRL register with dir set to read (0) and
- */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR));
-
- /* ensure PIO DMA is not set */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
-
- /* and start the transfer */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
-
- /* Wait for the interrupt to indicate the end of the transfer.
- * (PIO_DONE interrupt is set and it doesn't seem to matter
- * that we don't clear it)
- */
- wait_complete(base, PIO_DONE_INT);
-
- /* Read the ATA_DEV_RXBUF register with write data (to be
- * written into the device).
- */
- return ATAPI_GET_DEV_RXBUF(base);
-}
-
-/**
- *
- * Function: write_atapi_register_data
- *
- * Description: Writes to ATA Device Resgister
- *
- */
-
-static void write_atapi_data(void __iomem *base,
- int len, unsigned short *buf)
-{
- int i;
-
- /* Set transfer length to 1 */
- ATAPI_SET_XFER_LEN(base, 1);
-
- /* Program the ATA_DEV_ADDR register with address of the
- * ATA_REG_DATA
- */
- ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA);
-
- /* Program the ATA_CTRL register with dir set to write (1)
- */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR));
-
- /* ensure PIO DMA is not set */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
-
- for (i = 0; i < len; i++) {
- /* Program the ATA_DEV_TXBUF register with write data (to be
- * written into the device).
- */
- ATAPI_SET_DEV_TXBUF(base, buf[i]);
-
- /* and start the transfer */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
-
- /* Wait for the interrupt to indicate the end of the transfer.
- * (We need to wait on and clear rhe ATA_DEV_INT
- * interrupt status)
- */
- wait_complete(base, PIO_DONE_INT);
- }
-}
-
-/**
- *
- * Function: read_atapi_register_data
- *
- * Description: Reads from ATA Device Resgister
- *
- */
-
-static void read_atapi_data(void __iomem *base,
- int len, unsigned short *buf)
-{
- int i;
-
- /* Set transfer length to 1 */
- ATAPI_SET_XFER_LEN(base, 1);
-
- /* Program the ATA_DEV_ADDR register with address of the
- * ATA_REG_DATA
- */
- ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA);
-
- /* Program the ATA_CTRL register with dir set to read (0) and
- */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR));
-
- /* ensure PIO DMA is not set */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
-
- for (i = 0; i < len; i++) {
- /* and start the transfer */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
-
- /* Wait for the interrupt to indicate the end of the transfer.
- * (PIO_DONE interrupt is set and it doesn't seem to matter
- * that we don't clear it)
- */
- wait_complete(base, PIO_DONE_INT);
-
- /* Read the ATA_DEV_RXBUF register with write data (to be
- * written into the device).
- */
- buf[i] = ATAPI_GET_DEV_RXBUF(base);
- }
-}
-
-/**
- * bfin_tf_load - send taskfile registers to host controller
- * @ap: Port to which output is sent
- * @tf: ATA taskfile register set
- *
- * Note: Original code is ata_sff_tf_load().
- */
-
-static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- write_atapi_register(base, ATA_REG_CTRL, tf->ctl);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr) {
- if (tf->flags & ATA_TFLAG_LBA48) {
- write_atapi_register(base, ATA_REG_FEATURE,
- tf->hob_feature);
- write_atapi_register(base, ATA_REG_NSECT,
- tf->hob_nsect);
- write_atapi_register(base, ATA_REG_LBAL, tf->hob_lbal);
- write_atapi_register(base, ATA_REG_LBAM, tf->hob_lbam);
- write_atapi_register(base, ATA_REG_LBAH, tf->hob_lbah);
- dev_dbg(ap->dev, "hob: feat 0x%X nsect 0x%X, lba 0x%X "
- "0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
-
- write_atapi_register(base, ATA_REG_FEATURE, tf->feature);
- write_atapi_register(base, ATA_REG_NSECT, tf->nsect);
- write_atapi_register(base, ATA_REG_LBAL, tf->lbal);
- write_atapi_register(base, ATA_REG_LBAM, tf->lbam);
- write_atapi_register(base, ATA_REG_LBAH, tf->lbah);
- dev_dbg(ap->dev, "feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
- }
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- write_atapi_register(base, ATA_REG_DEVICE, tf->device);
- dev_dbg(ap->dev, "device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
-}
-
-/**
- * bfin_check_status - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Note: Original code is ata_check_status().
- */
-
-static u8 bfin_check_status(struct ata_port *ap)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- return read_atapi_register(base, ATA_REG_STATUS);
-}
-
-/**
- * bfin_tf_read - input device's ATA taskfile shadow registers
- * @ap: Port from which input is read
- * @tf: ATA taskfile register set for storing input
- *
- * Note: Original code is ata_sff_tf_read().
- */
-
-static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- tf->command = bfin_check_status(ap);
- tf->feature = read_atapi_register(base, ATA_REG_ERR);
- tf->nsect = read_atapi_register(base, ATA_REG_NSECT);
- tf->lbal = read_atapi_register(base, ATA_REG_LBAL);
- tf->lbam = read_atapi_register(base, ATA_REG_LBAM);
- tf->lbah = read_atapi_register(base, ATA_REG_LBAH);
- tf->device = read_atapi_register(base, ATA_REG_DEVICE);
-
- if (tf->flags & ATA_TFLAG_LBA48) {
- write_atapi_register(base, ATA_REG_CTRL, tf->ctl | ATA_HOB);
- tf->hob_feature = read_atapi_register(base, ATA_REG_ERR);
- tf->hob_nsect = read_atapi_register(base, ATA_REG_NSECT);
- tf->hob_lbal = read_atapi_register(base, ATA_REG_LBAL);
- tf->hob_lbam = read_atapi_register(base, ATA_REG_LBAM);
- tf->hob_lbah = read_atapi_register(base, ATA_REG_LBAH);
- }
-}
-
-/**
- * bfin_exec_command - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Note: Original code is ata_sff_exec_command().
- */
-
-static void bfin_exec_command(struct ata_port *ap,
- const struct ata_taskfile *tf)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
-
- write_atapi_register(base, ATA_REG_CMD, tf->command);
- ata_sff_pause(ap);
-}
-
-/**
- * bfin_check_altstatus - Read device alternate status reg
- * @ap: port where the device is
- */
-
-static u8 bfin_check_altstatus(struct ata_port *ap)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- return read_atapi_register(base, ATA_REG_ALTSTATUS);
-}
-
-/**
- * bfin_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- *
- * Note: Original code is ata_sff_dev_select().
- */
-
-static void bfin_dev_select(struct ata_port *ap, unsigned int device)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- u8 tmp;
-
- if (device == 0)
- tmp = ATA_DEVICE_OBS;
- else
- tmp = ATA_DEVICE_OBS | ATA_DEV1;
-
- write_atapi_register(base, ATA_REG_DEVICE, tmp);
- ata_sff_pause(ap);
-}
-
-/**
- * bfin_set_devctl - Write device control reg
- * @ap: port where the device is
- * @ctl: value to write
- */
-
-static void bfin_set_devctl(struct ata_port *ap, u8 ctl)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- write_atapi_register(base, ATA_REG_CTRL, ctl);
-}
-
-/**
- * bfin_bmdma_setup - Set up IDE DMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_setup().
- */
-
-static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct dma_desc_array *dma_desc_cpu = (struct dma_desc_array *)ap->bmdma_prd;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned short config = DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_16 | DMAEN;
- struct scatterlist *sg;
- unsigned int si;
- unsigned int channel;
- unsigned int dir;
- unsigned int size = 0;
-
- dev_dbg(qc->ap->dev, "in atapi dma setup\n");
- /* Program the ATA_CTRL register with dir */
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- channel = CH_ATAPI_TX;
- dir = DMA_TO_DEVICE;
- } else {
- channel = CH_ATAPI_RX;
- dir = DMA_FROM_DEVICE;
- config |= WNR;
- }
-
- dma_map_sg(ap->dev, qc->sg, qc->n_elem, dir);
-
- /* fill the ATAPI DMA controller */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- dma_desc_cpu[si].start_addr = sg_dma_address(sg);
- dma_desc_cpu[si].cfg = config;
- dma_desc_cpu[si].x_count = sg_dma_len(sg) >> 1;
- dma_desc_cpu[si].x_modify = 2;
- size += sg_dma_len(sg);
- }
-
- /* Set the last descriptor to stop mode */
- dma_desc_cpu[qc->n_elem - 1].cfg &= ~(DMAFLOW | NDSIZE);
-
- flush_dcache_range((unsigned int)dma_desc_cpu,
- (unsigned int)dma_desc_cpu +
- qc->n_elem * sizeof(struct dma_desc_array));
-
- /* Enable ATA DMA operation*/
- set_dma_curr_desc_addr(channel, (unsigned long *)ap->bmdma_prd_dma);
- set_dma_x_count(channel, 0);
- set_dma_x_modify(channel, 0);
- set_dma_config(channel, config);
-
- SSYNC();
-
- /* Send ATA DMA command */
- bfin_exec_command(ap, &qc->tf);
-
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- /* set ATA DMA write direction */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
- | XFER_DIR));
- } else {
- /* set ATA DMA read direction */
- ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
- & ~XFER_DIR));
- }
-
- /* Reset all transfer count */
- ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
-
- /* Set ATAPI state machine contorl in terminate sequence */
- ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
-
- /* Set transfer length to the total size of sg buffers */
- ATAPI_SET_XFER_LEN(base, size >> 1);
-}
-
-/**
- * bfin_bmdma_start - Start an IDE DMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_start().
- */
-
-static void bfin_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- dev_dbg(qc->ap->dev, "in atapi dma start\n");
-
- if (!(ap->udma_mask || ap->mwdma_mask))
- return;
-
- /* start ATAPI transfer*/
- if (ap->udma_mask)
- ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base)
- | ULTRA_START);
- else
- ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base)
- | MULTI_START);
-}
-
-/**
- * bfin_bmdma_stop - Stop IDE DMA transfer
- * @qc: Command we are ending DMA for
- */
-
-static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int dir;
-
- dev_dbg(qc->ap->dev, "in atapi dma stop\n");
-
- if (!(ap->udma_mask || ap->mwdma_mask))
- return;
-
- /* stop ATAPI DMA controller*/
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- dir = DMA_TO_DEVICE;
- disable_dma(CH_ATAPI_TX);
- } else {
- dir = DMA_FROM_DEVICE;
- disable_dma(CH_ATAPI_RX);
- }
-
- dma_unmap_sg(ap->dev, qc->sg, qc->n_elem, dir);
-}
-
-/**
- * bfin_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * Note: Original code is ata_devchk().
- */
-
-static unsigned int bfin_devchk(struct ata_port *ap,
- unsigned int device)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- u8 nsect, lbal;
-
- bfin_dev_select(ap, device);
-
- write_atapi_register(base, ATA_REG_NSECT, 0x55);
- write_atapi_register(base, ATA_REG_LBAL, 0xaa);
-
- write_atapi_register(base, ATA_REG_NSECT, 0xaa);
- write_atapi_register(base, ATA_REG_LBAL, 0x55);
-
- write_atapi_register(base, ATA_REG_NSECT, 0x55);
- write_atapi_register(base, ATA_REG_LBAL, 0xaa);
-
- nsect = read_atapi_register(base, ATA_REG_NSECT);
- lbal = read_atapi_register(base, ATA_REG_LBAL);
-
- if ((nsect == 0x55) && (lbal == 0xaa))
- return 1; /* we found a device */
-
- return 0; /* nothing found */
-}
-
-/**
- * bfin_bus_post_reset - PATA device post reset
- *
- * Note: Original code is ata_bus_post_reset().
- */
-
-static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned int dev0 = devmask & (1 << 0);
- unsigned int dev1 = devmask & (1 << 1);
- unsigned long deadline;
-
- /* if device 0 was found in ata_devchk, wait for its
- * BSY bit to clear
- */
- if (dev0)
- ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
-
- /* if device 1 was found in ata_devchk, wait for
- * register access, then wait for BSY to clear
- */
- deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
- while (dev1) {
- u8 nsect, lbal;
-
- bfin_dev_select(ap, 1);
- nsect = read_atapi_register(base, ATA_REG_NSECT);
- lbal = read_atapi_register(base, ATA_REG_LBAL);
- if ((nsect == 1) && (lbal == 1))
- break;
- if (time_after(jiffies, deadline)) {
- dev1 = 0;
- break;
- }
- ata_msleep(ap, 50); /* give drive a breather */
- }
- if (dev1)
- ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
-
- /* is all this really necessary? */
- bfin_dev_select(ap, 0);
- if (dev1)
- bfin_dev_select(ap, 1);
- if (dev0)
- bfin_dev_select(ap, 0);
-}
-
-/**
- * bfin_bus_softreset - PATA device software reset
- *
- * Note: Original code is ata_bus_softreset().
- */
-
-static unsigned int bfin_bus_softreset(struct ata_port *ap,
- unsigned int devmask)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- /* software reset. causes dev0 to be selected */
- write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
- udelay(20);
- write_atapi_register(base, ATA_REG_CTRL, ap->ctl | ATA_SRST);
- udelay(20);
- write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
-
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- ata_msleep(ap, 150);
-
- /* Before we perform post reset processing we want to see if
- * the bus shows 0xFF because the odd clown forgets the D7
- * pulldown resistor.
- */
- if (bfin_check_status(ap) == 0xFF)
- return 0;
-
- bfin_bus_post_reset(ap, devmask);
-
- return 0;
-}
-
-/**
- * bfin_softreset - reset host port via ATA SRST
- * @ap: port to reset
- * @classes: resulting classes of attached devices
- *
- * Note: Original code is ata_sff_softreset().
- */
-
-static int bfin_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- unsigned int devmask = 0, err_mask;
- u8 err;
-
- /* determine if device 0/1 are present */
- if (bfin_devchk(ap, 0))
- devmask |= (1 << 0);
- if (slave_possible && bfin_devchk(ap, 1))
- devmask |= (1 << 1);
-
- /* select device 0 again */
- bfin_dev_select(ap, 0);
-
- /* issue bus reset */
- err_mask = bfin_bus_softreset(ap, devmask);
- if (err_mask) {
- ata_port_err(ap, "SRST failed (err_mask=0x%x)\n",
- err_mask);
- return -EIO;
- }
-
- /* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_sff_dev_classify(&ap->link.device[0],
- devmask & (1 << 0), &err);
- if (slave_possible && err != 0x81)
- classes[1] = ata_sff_dev_classify(&ap->link.device[1],
- devmask & (1 << 1), &err);
-
- return 0;
-}
-
-/**
- * bfin_bmdma_status - Read IDE DMA status
- * @ap: Port associated with this ATA transaction.
- */
-
-static unsigned char bfin_bmdma_status(struct ata_port *ap)
-{
- unsigned char host_stat = 0;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON | ULTRA_XFER_ON))
- host_stat |= ATA_DMA_ACTIVE;
- if (ATAPI_GET_INT_STATUS(base) & ATAPI_DEV_INT)
- host_stat |= ATA_DMA_INTR;
-
- dev_dbg(ap->dev, "ATAPI: host_stat=0x%x\n", host_stat);
-
- return host_stat;
-}
-
-/**
- * bfin_data_xfer - Transfer data by PIO
- * @qc: queued command
- * @buf: data buffer
- * @buflen: buffer length
- * @write_data: read/write
- *
- * Note: Original code is ata_sff_data_xfer().
- */
-
-static unsigned int bfin_data_xfer(struct ata_queued_cmd *qc,
- unsigned char *buf,
- unsigned int buflen, int rw)
-{
- struct ata_port *ap = qc->dev->link->ap;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned int words = buflen >> 1;
- unsigned short *buf16 = (u16 *)buf;
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
- read_atapi_data(base, words, buf16);
- else
- write_atapi_data(base, words, buf16);
-
- /* Transfer trailing 1 byte, if any. */
- if (unlikely(buflen & 0x01)) {
- unsigned short align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
-
- if (rw == READ) {
- read_atapi_data(base, 1, align_buf);
- memcpy(trailing_buf, align_buf, 1);
- } else {
- memcpy(align_buf, trailing_buf, 1);
- write_atapi_data(base, 1, align_buf);
- }
- words++;
- }
-
- return words << 1;
-}
-
-/**
- * bfin_irq_clear - Clear ATAPI interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Note: Original code is ata_bmdma_irq_clear().
- */
-
-static void bfin_irq_clear(struct ata_port *ap)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- dev_dbg(ap->dev, "in atapi irq clear\n");
- ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
- | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
- | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
-}
-
-/**
- * bfin_thaw - Thaw DMA controller port
- * @ap: port to thaw
- *
- * Note: Original code is ata_sff_thaw().
- */
-
-void bfin_thaw(struct ata_port *ap)
-{
- dev_dbg(ap->dev, "in atapi dma thaw\n");
- bfin_check_status(ap);
- ata_sff_irq_on(ap);
-}
-
-/**
- * bfin_postreset - standard postreset callback
- * @ap: the target ata_port
- * @classes: classes of attached devices
- *
- * Note: Original code is ata_sff_postreset().
- */
-
-static void bfin_postreset(struct ata_link *link, unsigned int *classes)
-{
- struct ata_port *ap = link->ap;
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- /* re-enable interrupts */
- ata_sff_irq_on(ap);
-
- /* is double-select really necessary? */
- if (classes[0] != ATA_DEV_NONE)
- bfin_dev_select(ap, 1);
- if (classes[1] != ATA_DEV_NONE)
- bfin_dev_select(ap, 0);
-
- /* bail out if no device is present */
- if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
- return;
- }
-
- /* set up device control */
- write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
-}
-
-static void bfin_port_stop(struct ata_port *ap)
-{
- dev_dbg(ap->dev, "in atapi port stop\n");
- if (ap->udma_mask != 0 || ap->mwdma_mask != 0) {
- dma_free_coherent(ap->dev,
- BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
- ap->bmdma_prd,
- ap->bmdma_prd_dma);
-
- free_dma(CH_ATAPI_RX);
- free_dma(CH_ATAPI_TX);
- }
-}
-
-static int bfin_port_start(struct ata_port *ap)
-{
- dev_dbg(ap->dev, "in atapi port start\n");
- if (!(ap->udma_mask || ap->mwdma_mask))
- return 0;
-
- ap->bmdma_prd = dma_alloc_coherent(ap->dev,
- BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
- &ap->bmdma_prd_dma,
- GFP_KERNEL);
-
- if (ap->bmdma_prd == NULL) {
- dev_info(ap->dev, "Unable to allocate DMA descriptor array.\n");
- goto out;
- }
-
- if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) {
- if (request_dma(CH_ATAPI_TX,
- "BFIN ATAPI TX DMA") >= 0)
- return 0;
-
- free_dma(CH_ATAPI_RX);
- dma_free_coherent(ap->dev,
- BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
- ap->bmdma_prd,
- ap->bmdma_prd_dma);
- }
-
-out:
- ap->udma_mask = 0;
- ap->mwdma_mask = 0;
- dev_err(ap->dev, "Unable to request ATAPI DMA!"
- " Continue in PIO mode.\n");
-
- return 0;
-}
-
-static unsigned int bfin_ata_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
-{
- struct ata_eh_info *ehi = &ap->link.eh_info;
- u8 status, host_stat = 0;
-
- VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->print_id, qc->tf.protocol, ap->hsm_task_state);
-
- /* Check whether we are expecting interrupt in this state */
- switch (ap->hsm_task_state) {
- case HSM_ST_FIRST:
- /* Some pre-ATAPI-4 devices assert INTRQ
- * at this state when ready to receive CDB.
- */
-
- /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices.
- * No need to check is_atapi_taskfile(&qc->tf) again.
- */
- if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- goto idle_irq;
- break;
- case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA) {
- /* check status of DMA engine */
- host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n",
- ap->print_id, host_stat);
-
- /* if it's not our irq... */
- if (!(host_stat & ATA_DMA_INTR))
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transferring data to/from memory */
- qc->err_mask |= AC_ERR_HOST_BUS;
- ap->hsm_task_state = HSM_ST_ERR;
- }
- }
- break;
- case HSM_ST:
- break;
- default:
- goto idle_irq;
- }
-
- /* check altstatus */
- status = ap->ops->sff_check_altstatus(ap);
- if (status & ATA_BUSY)
- goto busy_ata;
-
- /* check main status, clearing INTRQ */
- status = ap->ops->sff_check_status(ap);
- if (unlikely(status & ATA_BUSY))
- goto busy_ata;
-
- /* ack bmdma irq events */
- ap->ops->sff_irq_clear(ap);
-
- ata_sff_hsm_move(ap, qc, status, 0);
-
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA))
- ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
-busy_ata:
- return 1; /* irq handled */
-
-idle_irq:
- ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
- if ((ap->stats.idle_irq % 1000) == 0) {
- ap->ops->irq_ack(ap, 0); /* debug trap */
- ata_port_warn(ap, "irq trap\n");
- return 1;
- }
-#endif
- return 0; /* irq not handled */
-}
-
-static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance)
-{
- struct ata_host *host = dev_instance;
- unsigned int i;
- unsigned int handled = 0;
- unsigned long flags;
-
- /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
- spin_lock_irqsave(&host->lock, flags);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled |= bfin_ata_host_intr(ap, qc);
- }
-
- spin_unlock_irqrestore(&host->lock, flags);
-
- return IRQ_RETVAL(handled);
-}
-
-
-static struct scsi_host_template bfin_sht = {
- ATA_BASE_SHT(DRV_NAME),
- .sg_tablesize = BFIN_MAX_SG_SEGMENTS,
- .dma_boundary = ATA_DMA_BOUNDARY,
-};
-
-static struct ata_port_operations bfin_pata_ops = {
- .inherits = &ata_bmdma_port_ops,
-
- .set_piomode = bfin_set_piomode,
- .set_dmamode = bfin_set_dmamode,
-
- .sff_tf_load = bfin_tf_load,
- .sff_tf_read = bfin_tf_read,
- .sff_exec_command = bfin_exec_command,
- .sff_check_status = bfin_check_status,
- .sff_check_altstatus = bfin_check_altstatus,
- .sff_dev_select = bfin_dev_select,
- .sff_set_devctl = bfin_set_devctl,
-
- .bmdma_setup = bfin_bmdma_setup,
- .bmdma_start = bfin_bmdma_start,
- .bmdma_stop = bfin_bmdma_stop,
- .bmdma_status = bfin_bmdma_status,
- .sff_data_xfer = bfin_data_xfer,
-
- .qc_prep = ata_noop_qc_prep,
-
- .thaw = bfin_thaw,
- .softreset = bfin_softreset,
- .postreset = bfin_postreset,
-
- .sff_irq_clear = bfin_irq_clear,
-
- .port_start = bfin_port_start,
- .port_stop = bfin_port_stop,
-};
-
-static struct ata_port_info bfin_port_info[] = {
- {
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = 0,
- .udma_mask = 0,
- .port_ops = &bfin_pata_ops,
- },
-};
-
-/**
- * bfin_reset_controller - initialize BF54x ATAPI controller.
- */
-
-static int bfin_reset_controller(struct ata_host *host)
-{
- void __iomem *base = (void __iomem *)host->ports[0]->ioaddr.ctl_addr;
- int count;
- unsigned short status;
-
- /* Disable all ATAPI interrupts */
- ATAPI_SET_INT_MASK(base, 0);
- SSYNC();
-
- /* Assert the RESET signal 25us*/
- ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | DEV_RST);
- udelay(30);
-
- /* Negate the RESET signal for 2ms*/
- ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) & ~DEV_RST);
- msleep(2);
-
- /* Wait on Busy flag to clear */
- count = 10000000;
- do {
- status = read_atapi_register(base, ATA_REG_STATUS);
- } while (--count && (status & ATA_BUSY));
-
- /* Enable only ATAPI Device interrupt */
- ATAPI_SET_INT_MASK(base, 1);
- SSYNC();
-
- return (!count);
-}
-
-/**
- * atapi_io_port - define atapi peripheral port pins.
- */
-static unsigned short atapi_io_port[] = {
- P_ATAPI_RESET,
- P_ATAPI_DIOR,
- P_ATAPI_DIOW,
- P_ATAPI_CS0,
- P_ATAPI_CS1,
- P_ATAPI_DMACK,
- P_ATAPI_DMARQ,
- P_ATAPI_INTRQ,
- P_ATAPI_IORDY,
- P_ATAPI_D0A,
- P_ATAPI_D1A,
- P_ATAPI_D2A,
- P_ATAPI_D3A,
- P_ATAPI_D4A,
- P_ATAPI_D5A,
- P_ATAPI_D6A,
- P_ATAPI_D7A,
- P_ATAPI_D8A,
- P_ATAPI_D9A,
- P_ATAPI_D10A,
- P_ATAPI_D11A,
- P_ATAPI_D12A,
- P_ATAPI_D13A,
- P_ATAPI_D14A,
- P_ATAPI_D15A,
- P_ATAPI_A0A,
- P_ATAPI_A1A,
- P_ATAPI_A2A,
- 0
-};
-
-/**
- * bfin_atapi_probe - attach a bfin atapi interface
- * @pdev: platform device
- *
- * Register a bfin atapi interface.
- *
- *
- * Platform devices are expected to contain 2 resources per port:
- *
- * - I/O Base (IORESOURCE_IO)
- * - IRQ (IORESOURCE_IRQ)
- *
- */
-static int bfin_atapi_probe(struct platform_device *pdev)
-{
- int board_idx = 0;
- struct resource *res;
- struct ata_host *host;
- unsigned int fsclk = get_sclk();
- int udma_mode = 5;
- const struct ata_port_info *ppi[] =
- { &bfin_port_info[board_idx], NULL };
-
- /*
- * Simple resource validation ..
- */
- if (unlikely(pdev->num_resources != 2)) {
- dev_err(&pdev->dev, "invalid number of resources\n");
- return -EINVAL;
- }
-
- /*
- * Get the register base first
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL)
- return -EINVAL;
-
- while (bfin_port_info[board_idx].udma_mask > 0 &&
- udma_fsclk[udma_mode] > fsclk) {
- udma_mode--;
- bfin_port_info[board_idx].udma_mask >>= 1;
- }
-
- /*
- * Now that that's out of the way, wire up the port..
- */
- host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
- if (!host)
- return -ENOMEM;
-
- host->ports[0]->ioaddr.ctl_addr = (void *)res->start;
-
- if (peripheral_request_list(atapi_io_port, "atapi-io-port")) {
- dev_err(&pdev->dev, "Requesting Peripherals failed\n");
- return -EFAULT;
- }
-
- if (bfin_reset_controller(host)) {
- peripheral_free_list(atapi_io_port);
- dev_err(&pdev->dev, "Fail to reset ATAPI device\n");
- return -EFAULT;
- }
-
- if (ata_host_activate(host, platform_get_irq(pdev, 0),
- bfin_ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
- peripheral_free_list(atapi_io_port);
- dev_err(&pdev->dev, "Fail to attach ATAPI device\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
-/**
- * bfin_atapi_remove - unplug a bfin atapi interface
- * @pdev: platform device
- *
- * A bfin atapi device has been unplugged. Perform the needed
- * cleanup. Also called on module unload for any active devices.
- */
-static int bfin_atapi_remove(struct platform_device *pdev)
-{
- struct ata_host *host = platform_get_drvdata(pdev);
-
- ata_host_detach(host);
-
- peripheral_free_list(atapi_io_port);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct ata_host *host = platform_get_drvdata(pdev);
- if (host)
- return ata_host_suspend(host, state);
- else
- return 0;
-}
-
-static int bfin_atapi_resume(struct platform_device *pdev)
-{
- struct ata_host *host = platform_get_drvdata(pdev);
- int ret;
-
- if (host) {
- ret = bfin_reset_controller(host);
- if (ret) {
- printk(KERN_ERR DRV_NAME ": Error during HW init\n");
- return ret;
- }
- ata_host_resume(host);
- }
-
- return 0;
-}
-#else
-#define bfin_atapi_suspend NULL
-#define bfin_atapi_resume NULL
-#endif
-
-static struct platform_driver bfin_atapi_driver = {
- .probe = bfin_atapi_probe,
- .remove = bfin_atapi_remove,
- .suspend = bfin_atapi_suspend,
- .resume = bfin_atapi_resume,
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-#define ATAPI_MODE_SIZE 10
-static char bfin_atapi_mode[ATAPI_MODE_SIZE];
-
-static int __init bfin_atapi_init(void)
-{
- pr_info("register bfin atapi driver\n");
-
- switch(bfin_atapi_mode[0]) {
- case 'p':
- case 'P':
- break;
- case 'm':
- case 'M':
- bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
- break;
- default:
- bfin_port_info[0].udma_mask = ATA_UDMA5;
- };
-
- return platform_driver_register(&bfin_atapi_driver);
-}
-
-static void __exit bfin_atapi_exit(void)
-{
- platform_driver_unregister(&bfin_atapi_driver);
-}
-
-module_init(bfin_atapi_init);
-module_exit(bfin_atapi_exit);
-/*
- * ATAPI mode:
- * pio/PIO
- * udma/UDMA (default)
- * mwdma/MWDMA
- */
-module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
-
-MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
-MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
index 6c3bd5fae3e4..fad95cfecced 100644
--- a/drivers/ata/pata_bk3710.c
+++ b/drivers/ata/pata_bk3710.c
@@ -1,3 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
+
/*
* Palmchip BK3710 PATA controller driver
*
@@ -8,10 +10,6 @@
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/ata.h>
@@ -379,4 +377,4 @@ static int __init pata_bk3710_init(void)
}
module_init(pata_bk3710_init);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
index 5b0c57d1c59f..41e0d6a6cd05 100644
--- a/drivers/ata/pata_falcon.c
+++ b/drivers/ata/pata_falcon.c
@@ -1,3 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
+
/*
* Atari Falcon PATA controller driver
*
@@ -7,10 +9,6 @@
* Based on falconide.c:
*
* Created 12 Jul 1997 by Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/kernel.h>
@@ -180,5 +178,5 @@ module_init(pata_falcon_init_one);
MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_gayle.c b/drivers/ata/pata_gayle.c
new file mode 100644
index 000000000000..65bc9f3042ce
--- /dev/null
+++ b/drivers/ata/pata_gayle.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Amiga Gayle PATA controller driver
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on gayle.c:
+ *
+ * Created 12 Jul 1997 by Geert Uytterhoeven
+ */
+
+#include <linux/ata.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/amigayle.h>
+#include <asm/ide.h>
+#include <asm/setup.h>
+
+#define DRV_NAME "pata_gayle"
+#define DRV_VERSION "0.1.0"
+
+#define GAYLE_CONTROL 0x101a
+
+static struct scsi_host_template pata_gayle_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+/* FIXME: is this needed? */
+static unsigned int pata_gayle_data_xfer(struct ata_queued_cmd *qc,
+ unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_device *dev = qc->dev;
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned int words = buflen >> 1;
+
+ /* Transfer multiple of 2 bytes */
+ if (rw == READ)
+ raw_insw((u16 *)data_addr, (u16 *)buf, words);
+ else
+ raw_outsw((u16 *)data_addr, (u16 *)buf, words);
+
+ /* Transfer trailing byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ unsigned char pad[2] = { };
+
+ /* Point buf to the tail of buffer */
+ buf += buflen - 1;
+
+ if (rw == READ) {
+ raw_insw((u16 *)data_addr, (u16 *)pad, 1);
+ *buf = pad[0];
+ } else {
+ pad[0] = *buf;
+ raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
+ }
+ words++;
+ }
+
+ return words << 1;
+}
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_gayle_set_mode(struct ata_link *link,
+ struct ata_device **unused)
+{
+ struct ata_device *dev;
+
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_info(dev, "configured for PIO\n");
+ }
+ return 0;
+}
+
+static bool pata_gayle_irq_check(struct ata_port *ap)
+{
+ u8 ch;
+
+ ch = z_readb((unsigned long)ap->private_data);
+
+ return !!(ch & GAYLE_IRQ_IDE);
+}
+
+static void pata_gayle_irq_clear(struct ata_port *ap)
+{
+ (void)z_readb((unsigned long)ap->ioaddr.status_addr);
+ z_writeb(0x7c, (unsigned long)ap->private_data);
+}
+
+static struct ata_port_operations pata_gayle_a1200_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = pata_gayle_data_xfer,
+ .sff_irq_check = pata_gayle_irq_check,
+ .sff_irq_clear = pata_gayle_irq_clear,
+ .cable_detect = ata_cable_unknown,
+ .set_mode = pata_gayle_set_mode,
+};
+
+static struct ata_port_operations pata_gayle_a4000_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = pata_gayle_data_xfer,
+ .cable_detect = ata_cable_unknown,
+ .set_mode = pata_gayle_set_mode,
+};
+
+static int __init pata_gayle_init_one(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct gayle_ide_platform_data *pdata;
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *base;
+ int ret;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ dev_info(&pdev->dev, "Amiga Gayle IDE controller (A%u style)\n",
+ pdata->explicit_ack ? 1200 : 4000);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), DRV_NAME)) {
+ pr_err(DRV_NAME ": resources busy\n");
+ return -EBUSY;
+ }
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+
+ if (pdata->explicit_ack)
+ ap->ops = &pata_gayle_a1200_ops;
+ else
+ ap->ops = &pata_gayle_a4000_ops;
+
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+
+ base = ZTWO_VADDR(pdata->base);
+ ap->ioaddr.data_addr = base;
+ ap->ioaddr.error_addr = base + 2 + 1 * 4;
+ ap->ioaddr.feature_addr = base + 2 + 1 * 4;
+ ap->ioaddr.nsect_addr = base + 2 + 2 * 4;
+ ap->ioaddr.lbal_addr = base + 2 + 3 * 4;
+ ap->ioaddr.lbam_addr = base + 2 + 4 * 4;
+ ap->ioaddr.lbah_addr = base + 2 + 5 * 4;
+ ap->ioaddr.device_addr = base + 2 + 6 * 4;
+ ap->ioaddr.status_addr = base + 2 + 7 * 4;
+ ap->ioaddr.command_addr = base + 2 + 7 * 4;
+
+ ap->ioaddr.altstatus_addr = base + GAYLE_CONTROL;
+ ap->ioaddr.ctl_addr = base + GAYLE_CONTROL;
+
+ ap->private_data = (void *)ZTWO_VADDR(pdata->irqport);
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", pdata->base,
+ pdata->base + GAYLE_CONTROL);
+
+ ret = ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
+ IRQF_SHARED, &pata_gayle_sht);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+}
+
+static int __exit pata_gayle_remove_one(struct platform_device *pdev)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+
+ ata_host_detach(host);
+
+ return 0;
+}
+
+static struct platform_driver pata_gayle_driver = {
+ .remove = __exit_p(pata_gayle_remove_one),
+ .driver = {
+ .name = "amiga-gayle-ide",
+ },
+};
+
+module_platform_driver_probe(pata_gayle_driver, pata_gayle_init_one);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for Amiga Gayle PATA");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:amiga-gayle-ide");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 8468b300193b..9bac79edbc2c 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -658,10 +658,10 @@ static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
u8 status;
int n = 0;
u16 *buf = kmalloc(len, GFP_KERNEL);
- if (buf == NULL) {
- printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
+
+ if (!buf)
return NULL;
- }
+
/* This isn't quite a normal ATA command as we are talking to the
firmware not the drives */
ap->ctl |= ATA_NIEN;
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 0adcb40d2794..9588e685d994 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -1131,11 +1131,9 @@ static int pata_macio_attach(struct macio_dev *mdev,
/* Allocate and init private data structure */
priv = devm_kzalloc(&mdev->ofdev.dev,
sizeof(struct pata_macio_priv), GFP_KERNEL);
- if (priv == NULL) {
- dev_err(&mdev->ofdev.dev,
- "Failed to allocate private memory\n");
+ if (!priv)
return -ENOMEM;
- }
+
priv->node = of_node_get(mdev->ofdev.dev.of_node);
priv->mdev = mdev;
priv->dev = &mdev->ofdev.dev;
@@ -1277,11 +1275,9 @@ static int pata_macio_pci_attach(struct pci_dev *pdev,
/* Allocate and init private data structure */
priv = devm_kzalloc(&pdev->dev,
sizeof(struct pata_macio_priv), GFP_KERNEL);
- if (priv == NULL) {
- dev_err(&pdev->dev,
- "Failed to allocate private memory\n");
+ if (!priv)
return -ENOMEM;
- }
+
priv->node = of_node_get(np);
priv->pdev = pdev;
priv->dev = &pdev->dev;
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 9730125530f6..f1d352d5f128 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -738,7 +738,6 @@ static int mpc52xx_ata_probe(struct platform_device *op)
/* Prepare our private structure */
priv = devm_kzalloc(&op->dev, sizeof(*priv), GFP_ATOMIC);
if (!priv) {
- dev_err(&op->dev, "error allocating private structure\n");
rv = -ENOMEM;
goto err1;
}
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index 50801c40b029..bb96dc35950d 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -505,10 +505,8 @@ static int __init pata_s3c_probe(struct platform_device *pdev)
cpu_type = platform_get_device_id(pdev)->driver_data;
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
- if (!info) {
- dev_err(dev, "failed to allocate memory for device data\n");
+ if (!info)
return -ENOMEM;
- }
info->irq = platform_get_irq(pdev, 0);
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 6af4ec3c88c3..ce3d6674ef80 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -901,7 +901,6 @@ static int sata_dwc_port_start(struct ata_port *ap)
/* Allocate Port Struct */
hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL);
if (!hsdevp) {
- dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
err = -ENOMEM;
goto CLEANUP;
}
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 80ee2f2a50d0..6456e07db72a 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -146,6 +146,7 @@
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
+ RCAR_GEN3_SATA,
RCAR_R8A7790_ES1_SATA,
};
@@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host)
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
}
-static void sata_rcar_init_controller(struct ata_host *host)
+static void sata_rcar_init_module(struct sata_rcar_priv *priv)
{
- struct sata_rcar_priv *priv = host->private_data;
void __iomem *base = priv->base;
u32 val;
- /* reset and setup phy */
- switch (priv->type) {
- case RCAR_GEN1_SATA:
- sata_rcar_gen1_phy_init(priv);
- break;
- case RCAR_GEN2_SATA:
- case RCAR_R8A7790_ES1_SATA:
- sata_rcar_gen2_phy_init(priv);
- break;
- default:
- dev_warn(host->dev, "SATA phy is not initialized\n");
- break;
- }
-
/* SATA-IP reset state */
val = ioread32(base + ATAPI_CONTROL1_REG);
val |= ATAPI_CONTROL1_RESET;
@@ -824,10 +810,33 @@ static void sata_rcar_init_controller(struct ata_host *host)
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
+
/* enable interrupts */
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
}
+static void sata_rcar_init_controller(struct ata_host *host)
+{
+ struct sata_rcar_priv *priv = host->private_data;
+
+ /* reset and setup phy */
+ switch (priv->type) {
+ case RCAR_GEN1_SATA:
+ sata_rcar_gen1_phy_init(priv);
+ break;
+ case RCAR_GEN2_SATA:
+ case RCAR_GEN3_SATA:
+ case RCAR_R8A7790_ES1_SATA:
+ sata_rcar_gen2_phy_init(priv);
+ break;
+ default:
+ dev_warn(host->dev, "SATA phy is not initialized\n");
+ break;
+ }
+
+ sata_rcar_init_module(priv);
+}
+
static const struct of_device_id sata_rcar_match[] = {
{
/* Deprecated by "renesas,sata-r8a7779" */
@@ -856,7 +865,7 @@ static const struct of_device_id sata_rcar_match[] = {
},
{
.compatible = "renesas,sata-r8a7795",
- .data = (void *)RCAR_GEN2_SATA
+ .data = (void *)RCAR_GEN3_SATA
},
{
.compatible = "renesas,rcar-gen2-sata",
@@ -864,7 +873,7 @@ static const struct of_device_id sata_rcar_match[] = {
},
{
.compatible = "renesas,rcar-gen3-sata",
- .data = (void *)RCAR_GEN2_SATA
+ .data = (void *)RCAR_GEN3_SATA
},
{ },
};
@@ -982,11 +991,18 @@ static int sata_rcar_resume(struct device *dev)
if (ret)
return ret;
- /* ack and mask */
- iowrite32(0, base + SATAINTSTAT_REG);
- iowrite32(0x7ff, base + SATAINTMASK_REG);
- /* enable interrupts */
- iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
+ if (priv->type == RCAR_GEN3_SATA) {
+ sata_rcar_gen2_phy_init(priv);
+ sata_rcar_init_module(priv);
+ } else {
+ /* ack and mask */
+ iowrite32(0, base + SATAINTSTAT_REG);
+ iowrite32(0x7ff, base + SATAINTMASK_REG);
+
+ /* enable interrupts */
+ iowrite32(ATAPI_INT_ENABLE_SATAINT,
+ base + ATAPI_INT_ENABLE_REG);
+ }
ata_host_resume(host);
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-13 09:38:53 +0100