diff options
Diffstat (limited to 'drivers/bluetooth/btintel.c')
| -rw-r--r-- | drivers/bluetooth/btintel.c | 1314 |
1 files changed, 1249 insertions, 65 deletions
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c index e44b6993cf91..f1705b46fc88 100644 --- a/drivers/bluetooth/btintel.c +++ b/drivers/bluetooth/btintel.c @@ -131,6 +131,26 @@ int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) } EXPORT_SYMBOL_GPL(btintel_set_bdaddr); +static int btintel_set_event_mask(struct hci_dev *hdev, bool debug) +{ + u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + struct sk_buff *skb; + int err; + + if (debug) + mask[1] |= 0x62; + + skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err); + return err; + } + kfree_skb(skb); + + return 0; +} + int btintel_set_diag(struct hci_dev *hdev, bool enable) { struct sk_buff *skb; @@ -164,7 +184,7 @@ done: } EXPORT_SYMBOL_GPL(btintel_set_diag); -int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable) +static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable) { int err, ret; @@ -180,9 +200,25 @@ int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable) return ret; } -EXPORT_SYMBOL_GPL(btintel_set_diag_mfg); -void btintel_hw_error(struct hci_dev *hdev, u8 code) +static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable) +{ + int ret; + + /* Legacy ROM device needs to be in the manufacturer mode to apply + * diagnostic setting + * + * This flag is set after reading the Intel version. + */ + if (btintel_test_flag(hdev, INTEL_ROM_LEGACY)) + ret = btintel_set_diag_mfg(hdev, enable); + else + ret = btintel_set_diag(hdev, enable); + + return ret; +} + +static void btintel_hw_error(struct hci_dev *hdev, u8 code) { struct sk_buff *skb; u8 type = 0x00; @@ -214,7 +250,6 @@ void btintel_hw_error(struct hci_dev *hdev, u8 code) kfree_skb(skb); } -EXPORT_SYMBOL_GPL(btintel_hw_error); int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) { @@ -236,6 +271,8 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) * compatibility options when newer hardware variants come along. */ switch (ver->hw_variant) { + case 0x07: /* WP - Legacy ROM */ + case 0x08: /* StP - Legacy ROM */ case 0x0b: /* SfP */ case 0x0c: /* WsP */ case 0x11: /* JfP */ @@ -250,9 +287,15 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) } switch (ver->fw_variant) { + case 0x01: + variant = "Legacy ROM 2.5"; + break; case 0x06: variant = "Bootloader"; break; + case 0x22: + variant = "Legacy ROM 2.x"; + break; case 0x23: variant = "Firmware"; break; @@ -270,8 +313,8 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) } EXPORT_SYMBOL_GPL(btintel_version_info); -int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, - const void *param) +static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, + const void *param) { while (plen > 0) { struct sk_buff *skb; @@ -293,7 +336,6 @@ int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, return 0; } -EXPORT_SYMBOL_GPL(btintel_secure_send); int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name) { @@ -340,27 +382,6 @@ int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name) } EXPORT_SYMBOL_GPL(btintel_load_ddc_config); -int btintel_set_event_mask(struct hci_dev *hdev, bool debug) -{ - u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - struct sk_buff *skb; - int err; - - if (debug) - mask[1] |= 0x62; - - skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - err = PTR_ERR(skb); - bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err); - return err; - } - kfree_skb(skb); - - return 0; -} -EXPORT_SYMBOL_GPL(btintel_set_event_mask); - int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug) { int err, ret; @@ -404,7 +425,8 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver) } EXPORT_SYMBOL_GPL(btintel_read_version); -int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *version) +static int btintel_version_info_tlv(struct hci_dev *hdev, + struct intel_version_tlv *version) { const char *variant; @@ -481,30 +503,11 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver return 0; } -EXPORT_SYMBOL_GPL(btintel_version_info_tlv); -int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version) +static int btintel_parse_version_tlv(struct hci_dev *hdev, + struct intel_version_tlv *version, + struct sk_buff *skb) { - struct sk_buff *skb; - const u8 param[1] = { 0xFF }; - - if (!version) - return -EINVAL; - - skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); - if (IS_ERR(skb)) { - bt_dev_err(hdev, "Reading Intel version information failed (%ld)", - PTR_ERR(skb)); - return PTR_ERR(skb); - } - - if (skb->data[0]) { - bt_dev_err(hdev, "Intel Read Version command failed (%02x)", - skb->data[0]); - kfree_skb(skb); - return -EIO; - } - /* Consume Command Complete Status field */ skb_pull(skb, 1); @@ -516,7 +519,16 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver while (skb->len) { struct intel_tlv *tlv; + /* Make sure skb has a minimum length of the header */ + if (skb->len < sizeof(*tlv)) + return -EINVAL; + tlv = (struct intel_tlv *)skb->data; + + /* Make sure skb has a enough data */ + if (skb->len < tlv->len + sizeof(*tlv)) + return -EINVAL; + switch (tlv->type) { case INTEL_TLV_CNVI_TOP: version->cnvi_top = get_unaligned_le32(tlv->val); @@ -580,7 +592,8 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver version->sbe_type = tlv->val[0]; break; case INTEL_TLV_OTP_BDADDR: - memcpy(&version->otp_bd_addr, tlv->val, tlv->len); + memcpy(&version->otp_bd_addr, tlv->val, + sizeof(bdaddr_t)); break; default: /* Ignore rest of information */ @@ -590,10 +603,37 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver skb_pull(skb, tlv->len + sizeof(*tlv)); } + return 0; +} + +static int btintel_read_version_tlv(struct hci_dev *hdev, + struct intel_version_tlv *version) +{ + struct sk_buff *skb; + const u8 param[1] = { 0xFF }; + + if (!version) + return -EINVAL; + + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version information failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->data[0]) { + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", + skb->data[0]); + kfree_skb(skb); + return -EIO; + } + + btintel_parse_version_tlv(hdev, version, skb); + kfree_skb(skb); return 0; } -EXPORT_SYMBOL_GPL(btintel_read_version_tlv); /* ------- REGMAP IBT SUPPORT ------- */ @@ -1066,10 +1106,10 @@ int btintel_download_firmware(struct hci_dev *hdev, } EXPORT_SYMBOL_GPL(btintel_download_firmware); -int btintel_download_firmware_newgen(struct hci_dev *hdev, - struct intel_version_tlv *ver, - const struct firmware *fw, u32 *boot_param, - u8 hw_variant, u8 sbe_type) +static int btintel_download_fw_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver, + const struct firmware *fw, u32 *boot_param, + u8 hw_variant, u8 sbe_type) { int err; u32 css_header_ver; @@ -1166,9 +1206,8 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev, } return 0; } -EXPORT_SYMBOL_GPL(btintel_download_firmware_newgen); -void btintel_reset_to_bootloader(struct hci_dev *hdev) +static void btintel_reset_to_bootloader(struct hci_dev *hdev) { struct intel_reset params; struct sk_buff *skb; @@ -1211,10 +1250,9 @@ void btintel_reset_to_bootloader(struct hci_dev *hdev) */ msleep(150); } -EXPORT_SYMBOL_GPL(btintel_reset_to_bootloader); -int btintel_read_debug_features(struct hci_dev *hdev, - struct intel_debug_features *features) +static int btintel_read_debug_features(struct hci_dev *hdev, + struct intel_debug_features *features) { struct sk_buff *skb; u8 page_no = 1; @@ -1243,9 +1281,8 @@ int btintel_read_debug_features(struct hci_dev *hdev, kfree_skb(skb); return 0; } -EXPORT_SYMBOL_GPL(btintel_read_debug_features); -int btintel_set_debug_features(struct hci_dev *hdev, +static int btintel_set_debug_features(struct hci_dev *hdev, const struct intel_debug_features *features) { u8 mask[11] = { 0x0a, 0x92, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00, @@ -1270,7 +1307,1154 @@ int btintel_set_debug_features(struct hci_dev *hdev, kfree_skb(skb); return 0; } -EXPORT_SYMBOL_GPL(btintel_set_debug_features); + +static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev, + struct intel_version *ver) +{ + const struct firmware *fw; + char fwname[64]; + int ret; + + snprintf(fwname, sizeof(fwname), + "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq", + ver->hw_platform, ver->hw_variant, ver->hw_revision, + ver->fw_variant, ver->fw_revision, ver->fw_build_num, + ver->fw_build_ww, ver->fw_build_yy); + + ret = request_firmware(&fw, fwname, &hdev->dev); + if (ret < 0) { + if (ret == -EINVAL) { + bt_dev_err(hdev, "Intel firmware file request failed (%d)", + ret); + return NULL; + } + + bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)", + fwname, ret); + + /* If the correct firmware patch file is not found, use the + * default firmware patch file instead + */ + snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq", + ver->hw_platform, ver->hw_variant); + if (request_firmware(&fw, fwname, &hdev->dev) < 0) { + bt_dev_err(hdev, "failed to open default fw file: %s", + fwname); + return NULL; + } + } + + bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname); + + return fw; +} + +static int btintel_legacy_rom_patching(struct hci_dev *hdev, + const struct firmware *fw, + const u8 **fw_ptr, int *disable_patch) +{ + struct sk_buff *skb; + struct hci_command_hdr *cmd; + const u8 *cmd_param; + struct hci_event_hdr *evt = NULL; + const u8 *evt_param = NULL; + int remain = fw->size - (*fw_ptr - fw->data); + + /* The first byte indicates the types of the patch command or event. + * 0x01 means HCI command and 0x02 is HCI event. If the first bytes + * in the current firmware buffer doesn't start with 0x01 or + * the size of remain buffer is smaller than HCI command header, + * the firmware file is corrupted and it should stop the patching + * process. + */ + if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) { + bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read"); + return -EINVAL; + } + (*fw_ptr)++; + remain--; + + cmd = (struct hci_command_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*cmd); + remain -= sizeof(*cmd); + + /* Ensure that the remain firmware data is long enough than the length + * of command parameter. If not, the firmware file is corrupted. + */ + if (remain < cmd->plen) { + bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len"); + return -EFAULT; + } + + /* If there is a command that loads a patch in the firmware + * file, then enable the patch upon success, otherwise just + * disable the manufacturer mode, for example patch activation + * is not required when the default firmware patch file is used + * because there are no patch data to load. + */ + if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e) + *disable_patch = 0; + + cmd_param = *fw_ptr; + *fw_ptr += cmd->plen; + remain -= cmd->plen; + + /* This reads the expected events when the above command is sent to the + * device. Some vendor commands expects more than one events, for + * example command status event followed by vendor specific event. + * For this case, it only keeps the last expected event. so the command + * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of + * last expected event. + */ + while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) { + (*fw_ptr)++; + remain--; + + evt = (struct hci_event_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*evt); + remain -= sizeof(*evt); + + if (remain < evt->plen) { + bt_dev_err(hdev, "Intel fw corrupted: invalid evt len"); + return -EFAULT; + } + + evt_param = *fw_ptr; + *fw_ptr += evt->plen; + remain -= evt->plen; + } + + /* Every HCI commands in the firmware file has its correspond event. + * If event is not found or remain is smaller than zero, the firmware + * file is corrupted. + */ + if (!evt || !evt_param || remain < 0) { + bt_dev_err(hdev, "Intel fw corrupted: invalid evt read"); + return -EFAULT; + } + + skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen, + cmd_param, evt->evt, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)", + cmd->opcode, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* It ensures that the returned event matches the event data read from + * the firmware file. At fist, it checks the length and then + * the contents of the event. + */ + if (skb->len != evt->plen) { + bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)", + le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + + if (memcmp(skb->data, evt_param, evt->plen)) { + bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)", + le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + kfree_skb(skb); + + return 0; +} + +static int btintel_legacy_rom_setup(struct hci_dev *hdev, + struct intel_version *ver) +{ + const struct firmware *fw; + const u8 *fw_ptr; + int disable_patch, err; + struct intel_version new_ver; + + BT_DBG("%s", hdev->name); + + /* fw_patch_num indicates the version of patch the device currently + * have. If there is no patch data in the device, it is always 0x00. + * So, if it is other than 0x00, no need to patch the device again. + */ + if (ver->fw_patch_num) { + bt_dev_info(hdev, + "Intel device is already patched. patch num: %02x", + ver->fw_patch_num); + goto complete; + } + + /* Opens the firmware patch file based on the firmware version read + * from the controller. If it fails to open the matching firmware + * patch file, it tries to open the default firmware patch file. + * If no patch file is found, allow the device to operate without + * a patch. + */ + fw = btintel_legacy_rom_get_fw(hdev, ver); + if (!fw) + goto complete; + fw_ptr = fw->data; + + /* Enable the manufacturer mode of the controller. + * Only while this mode is enabled, the driver can download the + * firmware patch data and configuration parameters. + */ + err = btintel_enter_mfg(hdev); + if (err) { + release_firmware(fw); + return err; + } + + disable_patch = 1; + + /* The firmware data file consists of list of Intel specific HCI + * commands and its expected events. The first byte indicates the + * type of the message, either HCI command or HCI event. + * + * It reads the command and its expected event from the firmware file, + * and send to the controller. Once __hci_cmd_sync_ev() returns, + * the returned event is compared with the event read from the firmware + * file and it will continue until all the messages are downloaded to + * the controller. + * + * Once the firmware patching is completed successfully, + * the manufacturer mode is disabled with reset and activating the + * downloaded patch. + * + * If the firmware patching fails, the manufacturer mode is + * disabled with reset and deactivating the patch. + * + * If the default patch file is used, no reset is done when disabling + * the manufacturer. + */ + while (fw->size > fw_ptr - fw->data) { + int ret; + + ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr, + &disable_patch); + if (ret < 0) + goto exit_mfg_deactivate; + } + + release_firmware(fw); + + if (disable_patch) + goto exit_mfg_disable; + + /* Patching completed successfully and disable the manufacturer mode + * with reset and activate the downloaded firmware patches. + */ + err = btintel_exit_mfg(hdev, true, true); + if (err) + return err; + + /* Need build number for downloaded fw patches in + * every power-on boot + */ + err = btintel_read_version(hdev, &new_ver); + if (err) + return err; + + bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated", + new_ver.fw_patch_num); + + goto complete; + +exit_mfg_disable: + /* Disable the manufacturer mode without reset */ + err = btintel_exit_mfg(hdev, false, false); + if (err) + return err; + + bt_dev_info(hdev, "Intel firmware patch completed"); + + goto complete; + +exit_mfg_deactivate: + release_firmware(fw); + + /* Patching failed. Disable the manufacturer mode with reset and + * deactivate the downloaded firmware patches. + */ + err = btintel_exit_mfg(hdev, true, false); + if (err) + return err; + + bt_dev_info(hdev, "Intel firmware patch completed and deactivated"); + +complete: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. + */ + btintel_set_event_mask_mfg(hdev, false); + + btintel_check_bdaddr(hdev); + + return 0; +} + +static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec) +{ + ktime_t delta, rettime; + unsigned long long duration; + int err; + + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + + bt_dev_info(hdev, "Waiting for firmware download to complete"); + + err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(msec)); + if (err == -EINTR) { + bt_dev_err(hdev, "Firmware loading interrupted"); + return err; + } + + if (err) { + bt_dev_err(hdev, "Firmware loading timeout"); + return -ETIMEDOUT; + } + + if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) { + bt_dev_err(hdev, "Firmware loading failed"); + return -ENOEXEC; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration); + + return 0; +} + +static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec) +{ + ktime_t delta, rettime; + unsigned long long duration; + int err; + + bt_dev_info(hdev, "Waiting for device to boot"); + + err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(msec)); + if (err == -EINTR) { + bt_dev_err(hdev, "Device boot interrupted"); + return -EINTR; + } + + if (err) { + bt_dev_err(hdev, "Device boot timeout"); + return -ETIMEDOUT; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Device booted in %llu usecs", duration); + + return 0; +} + +static int btintel_boot(struct hci_dev *hdev, u32 boot_addr) +{ + ktime_t calltime; + int err; + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_BOOTING); + + err = btintel_send_intel_reset(hdev, boot_addr); + if (err) { + bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); + btintel_reset_to_bootloader(hdev); + return err; + } + + /* The bootloader will not indicate when the device is ready. This + * is done by the operational firmware sending bootup notification. + * + * Booting into operational firmware should not take longer than + * 1 second. However if that happens, then just fail the setup + * since something went wrong. + */ + err = btintel_boot_wait(hdev, calltime, 1000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + + return err; +} + +static int btintel_get_fw_name(struct intel_version *ver, + struct intel_boot_params *params, + char *fw_name, size_t len, + const char *suffix) +{ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + snprintf(fw_name, len, "intel/ibt-%u-%u.%s", + le16_to_cpu(ver->hw_variant), + le16_to_cpu(params->dev_revid), + suffix); + break; + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s", + le16_to_cpu(ver->hw_variant), + le16_to_cpu(ver->hw_revision), + le16_to_cpu(ver->fw_revision), + suffix); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int btintel_download_fw(struct hci_dev *hdev, + struct intel_version *ver, + struct intel_boot_params *params, + u32 *boot_param) +{ + const struct firmware *fw; + char fwname[64]; + int err; + ktime_t calltime; + + if (!ver || !params) + return -EINVAL; + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x06 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->fw_variant == 0x23) { + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + btintel_check_bdaddr(hdev); + + /* SfP and WsP don't seem to update the firmware version on file + * so version checking is currently possible. + */ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + return 0; + } + + /* Proceed to download to check if the version matches */ + goto download; + } + + /* Read the secure boot parameters to identify the operating + * details of the bootloader. + */ + err = btintel_read_boot_params(hdev, params); + if (err) + return err; + + /* It is required that every single firmware fragment is acknowledged + * with a command complete event. If the boot parameters indicate + * that this bootloader does not send them, then abort the setup. + */ + if (params->limited_cce != 0x00) { + bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)", + params->limited_cce); + return -EINVAL; + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { + bt_dev_info(hdev, "No device address configured"); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + +download: + /* With this Intel bootloader only the hardware variant and device + * revision information are used to select the right firmware for SfP + * and WsP. + * + * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi. + * + * Currently the supported hardware variants are: + * 11 (0x0b) for iBT3.0 (LnP/SfP) + * 12 (0x0c) for iBT3.5 (WsP) + * + * For ThP/JfP and for future SKU's, the FW name varies based on HW + * variant, HW revision and FW revision, as these are dependent on CNVi + * and RF Combination. + * + * 17 (0x11) for iBT3.5 (JfP) + * 18 (0x12) for iBT3.5 (ThP) + * + * The firmware file name for these will be + * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi. + * + */ + err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi"); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Unsupported Intel firmware naming"); + return -EINVAL; + } + + err = firmware_request_nowarn(&fw, fwname, &hdev->dev); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", + fwname, err); + return err; + } + + bt_dev_info(hdev, "Found device firmware: %s", fwname); + + if (fw->size < 644) { + bt_dev_err(hdev, "Invalid size of firmware file (%zu)", + fw->size); + err = -EBADF; + goto done; + } + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_DOWNLOADING); + + /* Start firmware downloading and get boot parameter */ + err = btintel_download_firmware(hdev, ver, fw, boot_param); + if (err < 0) { + if (err == -EALREADY) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + err = 0; + goto done; + } + + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); + goto done; + } + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * INTEL_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = btintel_download_wait(hdev, calltime, 5000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + +done: + release_firmware(fw); + return err; +} + +static int btintel_bootloader_setup(struct hci_dev *hdev, + struct intel_version *ver) +{ + struct intel_version new_ver; + struct intel_boot_params params; + u32 boot_param; + char ddcname[64]; + int err; + struct intel_debug_features features; + + BT_DBG("%s", hdev->name); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + btintel_set_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_download_fw(hdev, ver, ¶ms, &boot_param); + if (err) + return err; + + /* controller is already having an operational firmware */ + if (ver->fw_variant == 0x23) + goto finish; + + err = btintel_boot(hdev, boot_param); + if (err) + return err; + + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_get_fw_name(ver, ¶ms, ddcname, + sizeof(ddcname), "ddc"); + + if (err < 0) { + bt_dev_err(hdev, "Unsupported Intel firmware naming"); + } else { + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + } + + /* Read the Intel supported features and if new exception formats + * supported, need to load the additional DDC config to enable. + */ + err = btintel_read_debug_features(hdev, &features); + if (!err) { + /* Set DDC mask for available debug features */ + btintel_set_debug_features(hdev, &features); + } + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version(hdev, &new_ver); + if (err) + return err; + + btintel_version_info(hdev, &new_ver); + +finish: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} + +static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, + char *fw_name, size_t len, + const char *suffix) +{ + /* The firmware file name for new generation controllers will be + * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> + */ + snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", + INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top), + INTEL_CNVX_TOP_STEP(ver->cnvi_top)), + INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top), + INTEL_CNVX_TOP_STEP(ver->cnvr_top)), + suffix); +} + +static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver, + u32 *boot_param) +{ + const struct firmware *fw; + char fwname[64]; + int err; + ktime_t calltime; + + if (!ver || !boot_param) + return -EINVAL; + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x03 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->img_type == 0x03) { + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + btintel_check_bdaddr(hdev); + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) { + bt_dev_info(hdev, "No device address configured"); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + + btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi"); + err = firmware_request_nowarn(&fw, fwname, &hdev->dev); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", + fwname, err); + + return err; + } + + bt_dev_info(hdev, "Found device firmware: %s", fwname); + + if (fw->size < 644) { + bt_dev_err(hdev, "Invalid size of firmware file (%zu)", + fw->size); + err = -EBADF; + goto done; + } + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_DOWNLOADING); + + /* Start firmware downloading and get boot parameter */ + err = btintel_download_fw_tlv(hdev, ver, fw, boot_param, + INTEL_HW_VARIANT(ver->cnvi_bt), + ver->sbe_type); + if (err < 0) { + if (err == -EALREADY) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + err = 0; + goto done; + } + + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); + goto done; + } + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * BTUSB_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = btintel_download_wait(hdev, calltime, 5000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + +done: + release_firmware(fw); + return err; +} + +static int btintel_bootloader_setup_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver) +{ + u32 boot_param; + char ddcname[64]; + int err; + struct intel_debug_features features; + struct intel_version_tlv new_ver; + + bt_dev_dbg(hdev, ""); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + btintel_set_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param); + if (err) + return err; + + /* check if controller is already having an operational firmware */ + if (ver->img_type == 0x03) + goto finish; + + err = btintel_boot(hdev, boot_param); + if (err) + return err; + + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + + btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc"); + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + + /* Read the Intel supported features and if new exception formats + * supported, need to load the additional DDC config to enable. + */ + err = btintel_read_debug_features(hdev, &features); + if (!err) { + /* Set DDC mask for available debug features */ + btintel_set_debug_features(hdev, &features); + } + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version_tlv(hdev, &new_ver); + if (err) + return err; + + btintel_version_info_tlv(hdev, &new_ver); + +finish: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} + +static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) +{ + switch (hw_variant) { + /* Legacy bootloader devices that supports MSFT Extension */ + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + /* All Intel new genration controllers support the Microsoft vendor + * extension are using 0xFC1E for VsMsftOpCode. + */ + case 0x17: + case 0x18: + case 0x19: + hci_set_msft_opcode(hdev, 0xFC1E); + break; + default: + /* Not supported */ + break; + } +} + +static int btintel_setup_combined(struct hci_dev *hdev) +{ + const u8 param[1] = { 0xFF }; + struct intel_version ver; + struct intel_version_tlv ver_tlv; + struct sk_buff *skb; + int err; + + BT_DBG("%s", hdev->name); + + /* The some controllers have a bug with the first HCI command sent to it + * returning number of completed commands as zero. This would stall the + * command processing in the Bluetooth core. + * + * As a workaround, send HCI Reset command first which will reset the + * number of completed commands and allow normal command processing + * from now on. + */ + if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD)) { + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, + "sending initial HCI reset failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + } + + /* Starting from TyP device, the command parameter and response are + * changed even though the OCF for HCI_Intel_Read_Version command + * remains same. The legacy devices can handle even if the + * command has a parameter and returns a correct version information. + * So, it uses new format to support both legacy and new format. + */ + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version command failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* Check the status */ + if (skb->data[0]) { + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", + skb->data[0]); + err = -EIO; + goto exit_error; + } + + /* Apply the common HCI quirks for Intel device */ + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); + + /* For Legacy device, check the HW platform value and size */ + if (skb->len == sizeof(ver) && skb->data[1] == 0x37) { + bt_dev_dbg(hdev, "Read the legacy Intel version information"); + + memcpy(&ver, skb->data, sizeof(ver)); + + /* Display version information */ + btintel_version_info(hdev, &ver); + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (ver.hw_variant) { + case 0x07: /* WP */ + case 0x08: /* StP */ + /* Legacy ROM product */ + btintel_set_flag(hdev, INTEL_ROM_LEGACY); + + /* Apply the device specific HCI quirks + * + * WBS for SdP - SdP and Stp have a same hw_varaint but + * different fw_variant + */ + if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22) + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, + &hdev->quirks); + + /* These devices have an issue with LED which doesn't + * go off immediately during shutdown. Set the flag + * here to send the LED OFF command during shutdown. + */ + btintel_set_flag(hdev, INTEL_BROKEN_LED); + + err = btintel_legacy_rom_setup(hdev, &ver); + break; + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + /* Apply the device specific HCI quirks + * + * All Legacy bootloader devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, + &hdev->quirks); + + /* Valid LE States quirk for JfP/ThP familiy */ + if (ver.hw_variant == 0x11 || ver.hw_variant == 0x12) + set_bit(HCI_QUIRK_VALID_LE_STATES, + &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, ver.hw_variant); + + err = btintel_bootloader_setup(hdev, &ver); + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + ver.hw_variant); + err = -EINVAL; + } + + goto exit_error; + } + + /* For TLV type device, parse the tlv data */ + err = btintel_parse_version_tlv(hdev, &ver_tlv, skb); + if (err) { + bt_dev_err(hdev, "Failed to parse TLV version information"); + goto exit_error; + } + + if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) { + bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)", + INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)); + err = -EINVAL; + goto exit_error; + } + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) { + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + /* Some legacy bootloader devices from JfP supports both old + * and TLV based HCI_Intel_Read_Version command. But we don't + * want to use the TLV based setup routines for those legacy + * bootloader device. + * + * Also, it is not easy to convert TLV based version from the + * legacy version format. + * + * So, as a workaround for those devices, use the legacy + * HCI_Intel_Read_Version to get the version information and + * run the legacy bootloader setup. + */ + err = btintel_read_version(hdev, &ver); + if (err) + return err; + err = btintel_bootloader_setup(hdev, &ver); + break; + case 0x17: + case 0x18: + case 0x19: + /* Display version information of TLV type */ + btintel_version_info_tlv(hdev, &ver_tlv); + + /* Apply the device specific HCI quirks for TLV based devices + * + * All TLV based devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + /* Valid LE States quirk for GfP */ + if (INTEL_HW_VARIANT(ver_tlv.cnvi_bt) == 0x18) + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + + err = btintel_bootloader_setup_tlv(hdev, &ver_tlv); + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + return -EINVAL; + } + +exit_error: + kfree_skb(skb); + + return err; +} + +static int btintel_shutdown_combined(struct hci_dev *hdev) +{ + struct sk_buff *skb; + int ret; + + /* Send HCI Reset to the controller to stop any BT activity which + * were triggered. This will help to save power and maintain the + * sync b/w Host and controller + */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "HCI reset during shutdown failed"); + return PTR_ERR(skb); + } + kfree_skb(skb); + + + /* Some platforms have an issue with BT LED when the interface is + * down or BT radio is turned off, which takes 5 seconds to BT LED + * goes off. This command turns off the BT LED immediately. + */ + if (btintel_test_flag(hdev, INTEL_BROKEN_LED)) { + skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + bt_dev_err(hdev, "turning off Intel device LED failed"); + return ret; + } + kfree_skb(skb); + } + + return 0; +} + +int btintel_configure_setup(struct hci_dev *hdev) +{ + hdev->manufacturer = 2; + hdev->setup = btintel_setup_combined; + hdev->shutdown = btintel_shutdown_combined; + hdev->hw_error = btintel_hw_error; + hdev->set_diag = btintel_set_diag_combined; + hdev->set_bdaddr = btintel_set_bdaddr; + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_configure_setup); + +void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len) +{ + const struct intel_bootup *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING)) + btintel_wake_up_flag(hdev, INTEL_BOOTING); +} +EXPORT_SYMBOL_GPL(btintel_bootup); + +void btintel_secure_send_result(struct hci_dev *hdev, + const void *ptr, unsigned int len) +{ + const struct intel_secure_send_result *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (evt->result) + btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED); + + if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) && + btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED)) + btintel_wake_up_flag(hdev, INTEL_DOWNLOADING); +} +EXPORT_SYMBOL_GPL(btintel_secure_send_result); MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION); |