diff options
Diffstat (limited to 'drivers/bluetooth/btuart_cs.c')
-rw-r--r-- | drivers/bluetooth/btuart_cs.c | 130 |
1 files changed, 40 insertions, 90 deletions
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 7b4bff4cfa2d..9ce4c93467e5 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -68,7 +68,7 @@ MODULE_LICENSE("GPL"); typedef struct btuart_info_t { - dev_link_t link; + struct pcmcia_device *p_dev; dev_node_t node; struct hci_dev *hdev; @@ -84,8 +84,8 @@ typedef struct btuart_info_t { } btuart_info_t; -static void btuart_config(dev_link_t *link); -static void btuart_release(dev_link_t *link); +static int btuart_config(struct pcmcia_device *link); +static void btuart_release(struct pcmcia_device *link); static void btuart_detach(struct pcmcia_device *p_dev); @@ -146,13 +146,13 @@ static void btuart_write_wakeup(btuart_info_t *info) } do { - register unsigned int iobase = info->link.io.BasePort1; + register unsigned int iobase = info->p_dev->io.BasePort1; register struct sk_buff *skb; register int len; clear_bit(XMIT_WAKEUP, &(info->tx_state)); - if (!(info->link.state & DEV_PRESENT)) + if (!pcmcia_dev_present(info->p_dev)) return; if (!(skb = skb_dequeue(&(info->txq)))) @@ -187,7 +187,7 @@ static void btuart_receive(btuart_info_t *info) return; } - iobase = info->link.io.BasePort1; + iobase = info->p_dev->io.BasePort1; do { info->hdev->stat.byte_rx++; @@ -301,7 +301,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst, struct pt_regs *reg return IRQ_NONE; } - iobase = info->link.io.BasePort1; + iobase = info->p_dev->io.BasePort1; spin_lock(&(info->lock)); @@ -357,7 +357,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed) return; } - iobase = info->link.io.BasePort1; + iobase = info->p_dev->io.BasePort1; spin_lock_irqsave(&(info->lock), flags); @@ -481,7 +481,7 @@ static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned lon static int btuart_open(btuart_info_t *info) { unsigned long flags; - unsigned int iobase = info->link.io.BasePort1; + unsigned int iobase = info->p_dev->io.BasePort1; struct hci_dev *hdev; spin_lock_init(&(info->lock)); @@ -550,7 +550,7 @@ static int btuart_open(btuart_info_t *info) static int btuart_close(btuart_info_t *info) { unsigned long flags; - unsigned int iobase = info->link.io.BasePort1; + unsigned int iobase = info->p_dev->io.BasePort1; struct hci_dev *hdev = info->hdev; if (!hdev) @@ -576,17 +576,16 @@ static int btuart_close(btuart_info_t *info) return 0; } -static int btuart_attach(struct pcmcia_device *p_dev) +static int btuart_probe(struct pcmcia_device *link) { btuart_info_t *info; - dev_link_t *link; /* Create new info device */ info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; - link = &info->link; + info->p_dev = link; link->priv = info; link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; @@ -598,31 +597,21 @@ static int btuart_attach(struct pcmcia_device *p_dev) link->irq.Instance = info; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.Vcc = 50; link->conf.IntType = INT_MEMORY_AND_IO; - link->handle = p_dev; - p_dev->instance = link; - - link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; - btuart_config(link); - - return 0; + return btuart_config(link); } -static void btuart_detach(struct pcmcia_device *p_dev) +static void btuart_detach(struct pcmcia_device *link) { - dev_link_t *link = dev_to_instance(p_dev); btuart_info_t *info = link->priv; - if (link->state & DEV_CONFIG) - btuart_release(link); - + btuart_release(link); kfree(info); } -static int get_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) +static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) { int i; @@ -633,30 +622,28 @@ static int get_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) return pcmcia_parse_tuple(handle, tuple, parse); } -static int first_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) +static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) { if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) return CS_NO_MORE_ITEMS; return get_tuple(handle, tuple, parse); } -static int next_tuple(client_handle_t handle, tuple_t *tuple, cisparse_t *parse) +static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) { if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS) return CS_NO_MORE_ITEMS; return get_tuple(handle, tuple, parse); } -static void btuart_config(dev_link_t *link) +static int btuart_config(struct pcmcia_device *link) { static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - client_handle_t handle = link->handle; btuart_info_t *info = link->priv; tuple_t tuple; u_short buf[256]; cisparse_t parse; cistpl_cftable_entry_t *cf = &parse.cftable_entry; - config_info_t config; int i, j, try, last_ret, last_fn; tuple.TupleData = (cisdata_t *)buf; @@ -666,7 +653,7 @@ static void btuart_config(dev_link_t *link) /* Get configuration register information */ tuple.DesiredTuple = CISTPL_CONFIG; - last_ret = first_tuple(handle, &tuple, &parse); + last_ret = first_tuple(link, &tuple, &parse); if (last_ret != CS_SUCCESS) { last_fn = ParseTuple; goto cs_failed; @@ -674,11 +661,6 @@ static void btuart_config(dev_link_t *link) link->conf.ConfigBase = parse.config.base; link->conf.Present = parse.config.rmask[0]; - /* Configure card */ - link->state |= DEV_CONFIG; - i = pcmcia_get_configuration_info(handle, &config); - link->conf.Vcc = config.Vcc; - /* First pass: look for a config entry that looks normal. */ tuple.TupleData = (cisdata_t *) buf; tuple.TupleOffset = 0; @@ -687,29 +669,29 @@ static void btuart_config(dev_link_t *link) tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; /* Two tries: without IO aliases, then with aliases */ for (try = 0; try < 2; try++) { - i = first_tuple(handle, &tuple, &parse); + i = first_tuple(link, &tuple, &parse); while (i != CS_NO_MORE_ITEMS) { if (i != CS_SUCCESS) goto next_entry; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { link->conf.ConfigIndex = cf->index; link->io.BasePort1 = cf->io.win[0].base; link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link->handle, &link->io); + i = pcmcia_request_io(link, &link->io); if (i == CS_SUCCESS) goto found_port; } next_entry: - i = next_tuple(handle, &tuple, &parse); + i = next_tuple(link, &tuple, &parse); } } /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */ - i = first_tuple(handle, &tuple, &parse); + i = first_tuple(link, &tuple, &parse); while (i != CS_NO_MORE_ITEMS) { if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { @@ -717,30 +699,30 @@ next_entry: for (j = 0; j < 5; j++) { link->io.BasePort1 = base[j]; link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link->handle, &link->io); + i = pcmcia_request_io(link, &link->io); if (i == CS_SUCCESS) goto found_port; } } - i = next_tuple(handle, &tuple, &parse); + i = next_tuple(link, &tuple, &parse); } found_port: if (i != CS_SUCCESS) { BT_ERR("No usable port range found"); - cs_error(link->handle, RequestIO, i); + cs_error(link, RequestIO, i); goto failed; } - i = pcmcia_request_irq(link->handle, &link->irq); + i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { - cs_error(link->handle, RequestIRQ, i); + cs_error(link, RequestIRQ, i); link->irq.AssignedIRQ = 0; } - i = pcmcia_request_configuration(link->handle, &link->conf); + i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { - cs_error(link->handle, RequestConfiguration, i); + cs_error(link, RequestConfiguration, i); goto failed; } @@ -748,58 +730,28 @@ found_port: goto failed; strcpy(info->node.dev_name, info->hdev->name); - link->dev = &info->node; - link->state &= ~DEV_CONFIG_PENDING; + link->dev_node = &info->node; - return; + return 0; cs_failed: - cs_error(link->handle, last_fn, last_ret); + cs_error(link, last_fn, last_ret); failed: btuart_release(link); + return -ENODEV; } -static void btuart_release(dev_link_t *link) +static void btuart_release(struct pcmcia_device *link) { btuart_info_t *info = link->priv; - if (link->state & DEV_PRESENT) - btuart_close(info); - - link->dev = NULL; - - pcmcia_release_configuration(link->handle); - pcmcia_release_io(link->handle, &link->io); - pcmcia_release_irq(link->handle, &link->irq); - - link->state &= ~DEV_CONFIG; -} - -static int btuart_suspend(struct pcmcia_device *dev) -{ - dev_link_t *link = dev_to_instance(dev); - - link->state |= DEV_SUSPEND; - if (link->state & DEV_CONFIG) - pcmcia_release_configuration(link->handle); + btuart_close(info); - return 0; + pcmcia_disable_device(link); } -static int btuart_resume(struct pcmcia_device *dev) -{ - dev_link_t *link = dev_to_instance(dev); - - link->state &= ~DEV_SUSPEND; - if (DEV_OK(link)) - pcmcia_request_configuration(link->handle, &link->conf); - - return 0; -} - - static struct pcmcia_device_id btuart_ids[] = { /* don't use this driver. Use serial_cs + hci_uart instead */ PCMCIA_DEVICE_NULL @@ -811,11 +763,9 @@ static struct pcmcia_driver btuart_driver = { .drv = { .name = "btuart_cs", }, - .probe = btuart_attach, + .probe = btuart_probe, .remove = btuart_detach, .id_table = btuart_ids, - .suspend = btuart_suspend, - .resume = btuart_resume, }; static int __init init_btuart_cs(void) |