1 files changed, 697 insertions, 14 deletions

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 19cf2cf22e87..8bfc4c2bba87 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -28,7 +28,7 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "0.6"
+#define VERSION "0.7"
 
 static bool disable_scofix;
 static bool force_scofix;
@@ -49,11 +49,17 @@ static struct usb_driver btusb_driver;
 #define BTUSB_INTEL_BOOT	0x200
 #define BTUSB_BCM_PATCHRAM	0x400
 #define BTUSB_MARVELL		0x800
+#define BTUSB_SWAVE		0x1000
+#define BTUSB_INTEL_NEW		0x2000
+#define BTUSB_AMP		0x4000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
+	/* Generic Bluetooth AMP device */
+	{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
+
 	/* Apple-specific (Broadcom) devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
 
@@ -85,7 +91,7 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x05ac, 0x8281) },
 
 	/* AVM BlueFRITZ! USB v2.0 */
-	{ USB_DEVICE(0x057c, 0x3800) },
+	{ USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
 
 	/* Bluetooth Ultraport Module from IBM */
 	{ USB_DEVICE(0x04bf, 0x030a) },
@@ -109,16 +115,24 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3404),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
+	/* Broadcom BCM20702B0 (Dynex/Insignia) */
+	{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
+
 	/* Foxconn - Hon Hai */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
+	/* Lite-On Technology - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
 	/* Broadcom devices with vendor specific id */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* ASUSTek Computer - Broadcom based */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Belkin F8065bf - Broadcom based */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
@@ -188,6 +202,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
@@ -237,6 +252,9 @@ static const struct usb_device_id blacklist_table[] = {
 	/* CONWISE Technology based adapters with buggy SCO support */
 	{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
 
+	/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
+	{ USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
+
 	/* Digianswer devices */
 	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
 	{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
@@ -249,13 +267,19 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x16d3, 0x0002),
 	  .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
 
-	/* Intel Bluetooth device */
+	/* Marvell Bluetooth devices */
+	{ USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
+	{ USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
+
+	/* Intel Bluetooth devices */
+	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
+	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
 
-	/* Marvell device */
-	{ USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
-	{ USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
+	/* Other Intel Bluetooth devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
+	  .driver_info = BTUSB_IGNORE },
 
 	{ }	/* Terminating entry */
 };
@@ -267,6 +291,11 @@ static const struct usb_device_id blacklist_table[] = {
 #define BTUSB_ISOC_RUNNING	2
 #define BTUSB_SUSPENDING	3
 #define BTUSB_DID_ISO_RESUME	4
+#define BTUSB_BOOTLOADER	5
+#define BTUSB_DOWNLOADING	6
+#define BTUSB_FIRMWARE_LOADED	7
+#define BTUSB_FIRMWARE_FAILED	8
+#define BTUSB_BOOTING		9
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -300,14 +329,26 @@ struct btusb_data {
 	struct usb_endpoint_descriptor *isoc_rx_ep;
 
 	__u8 cmdreq_type;
+	__u8 cmdreq;
 
 	unsigned int sco_num;
 	int isoc_altsetting;
 	int suspend_count;
 
+	int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
 	int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
 };
 
+static int btusb_wait_on_bit_timeout(void *word, int bit, unsigned long timeout,
+				     unsigned mode)
+{
+	might_sleep();
+	if (!test_bit(bit, word))
+		return 0;
+	return out_of_line_wait_on_bit_timeout(word, bit, bit_wait_timeout,
+					       mode, timeout);
+}
+
 static inline void btusb_free_frags(struct btusb_data *data)
 {
 	unsigned long flags;
@@ -370,7 +411,7 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
 
 		if (bt_cb(skb)->expect == 0) {
 			/* Complete frame */
-			hci_recv_frame(data->hdev, skb);
+			data->recv_event(data->hdev, skb);
 			skb = NULL;
 		}
 	}
@@ -952,7 +993,7 @@ static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
 	}
 
 	dr->bRequestType = data->cmdreq_type;
-	dr->bRequest     = 0;
+	dr->bRequest     = data->cmdreq;
 	dr->wIndex       = 0;
 	dr->wValue       = 0;
 	dr->wLength      = __cpu_to_le16(skb->len);
@@ -1290,6 +1331,26 @@ struct intel_version {
 	u8 fw_patch_num;
 } __packed;
 
+struct intel_boot_params {
+	__u8     status;
+	__u8     otp_format;
+	__u8     otp_content;
+	__u8     otp_patch;
+	__le16   dev_revid;
+	__u8     secure_boot;
+	__u8     key_from_hdr;
+	__u8     key_type;
+	__u8     otp_lock;
+	__u8     api_lock;
+	__u8     debug_lock;
+	bdaddr_t otp_bdaddr;
+	__u8     min_fw_build_nn;
+	__u8     min_fw_build_cw;
+	__u8     min_fw_build_yy;
+	__u8     limited_cce;
+	__u8     unlocked_state;
+} __packed;
+
 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
 						       struct intel_version *ver)
 {
@@ -1698,6 +1759,562 @@ exit_mfg_deactivate:
 	return 0;
 }
 
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+	struct sk_buff *skb;
+	struct hci_event_hdr *hdr;
+	struct hci_ev_cmd_complete *evt;
+
+	skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
+	hdr->evt = HCI_EV_CMD_COMPLETE;
+	hdr->plen = sizeof(*evt) + 1;
+
+	evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
+	evt->ncmd = 0x01;
+	evt->opcode = cpu_to_le16(opcode);
+
+	*skb_put(skb, 1) = 0x00;
+
+	bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
+				 int count)
+{
+	/* When the device is in bootloader mode, then it can send
+	 * events via the bulk endpoint. These events are treated the
+	 * same way as the ones received from the interrupt endpoint.
+	 */
+	if (test_bit(BTUSB_BOOTLOADER, &data->flags))
+		return btusb_recv_intr(data, buffer, count);
+
+	return btusb_recv_bulk(data, buffer, count);
+}
+
+static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+
+	if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
+		struct hci_event_hdr *hdr = (void *)skb->data;
+
+		/* When the firmware loading completes the device sends
+		 * out a vendor specific event indicating the result of
+		 * the firmware loading.
+		 */
+		if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+		    skb->data[2] == 0x06) {
+			if (skb->data[3] != 0x00)
+				test_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
+
+			if (test_and_clear_bit(BTUSB_DOWNLOADING,
+					       &data->flags) &&
+			    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
+				smp_mb__after_atomic();
+				wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
+			}
+		}
+
+		/* When switching to the operational firmware the device
+		 * sends a vendor specific event indicating that the bootup
+		 * completed.
+		 */
+		if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+		    skb->data[2] == 0x02) {
+			if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
+				smp_mb__after_atomic();
+				wake_up_bit(&data->flags, BTUSB_BOOTING);
+			}
+		}
+	}
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -EBUSY;
+
+	switch (bt_cb(skb)->pkt_type) {
+	case HCI_COMMAND_PKT:
+		if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
+			struct hci_command_hdr *cmd = (void *)skb->data;
+			__u16 opcode = le16_to_cpu(cmd->opcode);
+
+			/* When in bootloader mode and the command 0xfc09
+			 * is received, it needs to be send down the
+			 * bulk endpoint. So allocate a bulk URB instead.
+			 */
+			if (opcode == 0xfc09)
+				urb = alloc_bulk_urb(hdev, skb);
+			else
+				urb = alloc_ctrl_urb(hdev, skb);
+
+			/* When the 0xfc01 command is issued to boot into
+			 * the operational firmware, it will actually not
+			 * send a command complete event. To keep the flow
+			 * control working inject that event here.
+			 */
+			if (opcode == 0xfc01)
+				inject_cmd_complete(hdev, opcode);
+		} else {
+			urb = alloc_ctrl_urb(hdev, skb);
+		}
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.cmd_tx++;
+		return submit_or_queue_tx_urb(hdev, urb);
+
+	case HCI_ACLDATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.acl_tx++;
+		return submit_or_queue_tx_urb(hdev, urb);
+
+	case HCI_SCODATA_PKT:
+		if (hci_conn_num(hdev, SCO_LINK) < 1)
+			return -ENODEV;
+
+		urb = alloc_isoc_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.sco_tx++;
+		return submit_tx_urb(hdev, urb);
+	}
+
+	return -EILSEQ;
+}
+
+static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type,
+				   u32 plen, const void *param)
+{
+	while (plen > 0) {
+		struct sk_buff *skb;
+		u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
+
+		cmd_param[0] = fragment_type;
+		memcpy(cmd_param + 1, param, fragment_len);
+
+		skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
+				     cmd_param, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+
+		kfree_skb(skb);
+
+		plen -= fragment_len;
+		param += fragment_len;
+	}
+
+	return 0;
+}
+
+static void btusb_intel_version_info(struct hci_dev *hdev,
+				     struct intel_version *ver)
+{
+	const char *variant;
+
+	switch (ver->fw_variant) {
+	case 0x06:
+		variant = "Bootloader";
+		break;
+	case 0x23:
+		variant = "Firmware";
+		break;
+	default:
+		return;
+	}
+
+	BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name,
+		variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
+		ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy);
+}
+
+static int btusb_setup_intel_new(struct hci_dev *hdev)
+{
+	static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
+					  0x00, 0x08, 0x04, 0x00 };
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct sk_buff *skb;
+	struct intel_version *ver;
+	struct intel_boot_params *params;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	char fwname[64];
+	ktime_t calltime, delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	calltime = ktime_get();
+
+	/* Read the Intel version information to determine if the device
+	 * is in bootloader mode or if it already has operational firmware
+	 * loaded.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading Intel version information failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s: Intel version event size mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EILSEQ;
+	}
+
+	ver = (struct intel_version *)skb->data;
+	if (ver->status) {
+		BT_ERR("%s: Intel version command failure (%02x)",
+		       hdev->name, ver->status);
+		err = -bt_to_errno(ver->status);
+		kfree_skb(skb);
+		return err;
+	}
+
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver->hw_platform != 0x37) {
+		BT_ERR("%s: Unsupported Intel hardware platform (%u)",
+		       hdev->name, ver->hw_platform);
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	/* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
+	 * supported by this firmware loading method. This check has been
+	 * put in place to ensure correct forward compatibility options
+	 * when newer hardware variants come along.
+	 */
+	if (ver->hw_variant != 0x0b) {
+		BT_ERR("%s: Unsupported Intel hardware variant (%u)",
+		       hdev->name, ver->hw_variant);
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	btusb_intel_version_info(hdev, ver);
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver->fw_variant == 0x23) {
+		kfree_skb(skb);
+		clear_bit(BTUSB_BOOTLOADER, &data->flags);
+		btusb_check_bdaddr_intel(hdev);
+		return 0;
+	}
+
+	/* If the device is not in bootloader mode, then the only possible
+	 * choice is to return an error and abort the device initialization.
+	 */
+	if (ver->fw_variant != 0x06) {
+		BT_ERR("%s: Unsupported Intel firmware variant (%u)",
+		       hdev->name, ver->fw_variant);
+		kfree_skb(skb);
+		return -ENODEV;
+	}
+
+	kfree_skb(skb);
+
+	/* Read the secure boot parameters to identify the operating
+	 * details of the bootloader.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*params)) {
+		BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EILSEQ;
+	}
+
+	params = (struct intel_boot_params *)skb->data;
+	if (params->status) {
+		BT_ERR("%s: Intel boot parameters command failure (%02x)",
+		       hdev->name, params->status);
+		err = -bt_to_errno(params->status);
+		kfree_skb(skb);
+		return err;
+	}
+
+	BT_INFO("%s: Device revision is %u", hdev->name,
+		le16_to_cpu(params->dev_revid));
+
+	BT_INFO("%s: Secure boot is %s", hdev->name,
+		params->secure_boot ? "enabled" : "disabled");
+
+	BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
+		params->min_fw_build_nn, params->min_fw_build_cw,
+		2000 + params->min_fw_build_yy);
+
+	/* It is required that every single firmware fragment is acknowledged
+	 * with a command complete event. If the boot parameters indicate
+	 * that this bootloader does not send them, then abort the setup.
+	 */
+	if (params->limited_cce != 0x00) {
+		BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
+		       hdev->name, params->limited_cce);
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	/* If the OTP has no valid Bluetooth device address, then there will
+	 * also be no valid address for the operational firmware.
+	 */
+	if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
+		BT_INFO("%s: No device address configured", hdev->name);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	/* With this Intel bootloader only the hardware variant and device
+	 * revision information are used to select the right firmware.
+	 *
+	 * Currently this bootloader support is limited to hardware variant
+	 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+	 */
+	snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
+		 le16_to_cpu(params->dev_revid));
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		BT_ERR("%s: Failed to load Intel firmware file (%d)",
+		       hdev->name, err);
+		kfree_skb(skb);
+		return err;
+	}
+
+	BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
+
+	kfree_skb(skb);
+
+	if (fw->size < 644) {
+		BT_ERR("%s: Invalid size of firmware file (%zu)",
+		       hdev->name, fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	set_bit(BTUSB_DOWNLOADING, &data->flags);
+
+	/* Start the firmware download transaction with the Init fragment
+	 * represented by the 128 bytes of CSS header.
+	 */
+	err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data);
+	if (err < 0) {
+		BT_ERR("%s: Failed to send firmware header (%d)",
+		       hdev->name, err);
+		goto done;
+	}
+
+	/* Send the 256 bytes of public key information from the firmware
+	 * as the PKey fragment.
+	 */
+	err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128);
+	if (err < 0) {
+		BT_ERR("%s: Failed to send firmware public key (%d)",
+		       hdev->name, err);
+		goto done;
+	}
+
+	/* Send the 256 bytes of signature information from the firmware
+	 * as the Sign fragment.
+	 */
+	err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388);
+	if (err < 0) {
+		BT_ERR("%s: Failed to send firmware signature (%d)",
+		       hdev->name, err);
+		goto done;
+	}
+
+	fw_ptr = fw->data + 644;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)fw_ptr;
+		u8 cmd_len;
+
+		cmd_len = sizeof(*cmd) + cmd->plen;
+
+		/* Send each command from the firmware data buffer as
+		 * a single Data fragment.
+		 */
+		err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
+		if (err < 0) {
+			BT_ERR("%s: Failed to send firmware data (%d)",
+			       hdev->name, err);
+			goto done;
+		}
+
+		fw_ptr += cmd_len;
+	}
+
+	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+
+	BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * BTUSB_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+					msecs_to_jiffies(5000),
+					TASK_INTERRUPTIBLE);
+	if (err == 1) {
+		BT_ERR("%s: Firmware loading interrupted", hdev->name);
+		err = -EINTR;
+		goto done;
+	}
+
+	if (err) {
+		BT_ERR("%s: Firmware loading timeout", hdev->name);
+		err = -ETIMEDOUT;
+		goto done;
+	}
+
+	if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
+		BT_ERR("%s: Firmware loading failed", hdev->name);
+		err = -ENOEXEC;
+		goto done;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
+
+done:
+	release_firmware(fw);
+
+	if (err < 0)
+		return err;
+
+	calltime = ktime_get();
+
+	set_bit(BTUSB_BOOTING, &data->flags);
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	BT_INFO("%s: Waiting for device to boot", hdev->name);
+
+	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+					msecs_to_jiffies(1000),
+					TASK_INTERRUPTIBLE);
+
+	if (err == 1) {
+		BT_ERR("%s: Device boot interrupted", hdev->name);
+		return -EINTR;
+	}
+
+	if (err) {
+		BT_ERR("%s: Device boot timeout", hdev->name);
+		return -ETIMEDOUT;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
+
+	clear_bit(BTUSB_BOOTLOADER, &data->flags);
+
+	return 0;
+}
+
+static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
+{
+	struct sk_buff *skb;
+	u8 type = 0x00;
+
+	BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reset after hardware error failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return;
+	}
+	kfree_skb(skb);
+
+	skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return;
+	}
+
+	if (skb->len != 13) {
+		BT_ERR("%s: Exception info size mismatch", hdev->name);
+		kfree_skb(skb);
+		return;
+	}
+
+	if (skb->data[0] != 0x00) {
+		BT_ERR("%s: Exception info command failure (%02x)",
+		       hdev->name, skb->data[0]);
+		kfree_skb(skb);
+		return;
+	}
+
+	BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
+
+	kfree_skb(skb);
+}
+
 static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 {
 	struct sk_buff *skb;
@@ -1943,6 +2560,31 @@ static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 	return 0;
 }
 
+static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[10];
+	long ret;
+
+	buf[0] = 0x01;
+	buf[1] = 0x01;
+	buf[2] = 0x00;
+	buf[3] = sizeof(bdaddr_t);
+	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		BT_ERR("%s: Change address command failed (%ld)",
+		       hdev->name, ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
@@ -2003,7 +2645,13 @@ static int btusb_probe(struct usb_interface *intf,
 	if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
 		return -ENODEV;
 
-	data->cmdreq_type = USB_TYPE_CLASS;
+	if (id->driver_info & BTUSB_AMP) {
+		data->cmdreq_type = USB_TYPE_CLASS | 0x01;
+		data->cmdreq = 0x2b;
+	} else {
+		data->cmdreq_type = USB_TYPE_CLASS;
+		data->cmdreq = 0x00;
+	}
 
 	data->udev = interface_to_usbdev(intf);
 	data->intf = intf;
@@ -2019,7 +2667,14 @@ static int btusb_probe(struct usb_interface *intf,
 	init_usb_anchor(&data->isoc_anchor);
 	spin_lock_init(&data->rxlock);
 
-	data->recv_bulk = btusb_recv_bulk;
+	if (id->driver_info & BTUSB_INTEL_NEW) {
+		data->recv_event = btusb_recv_event_intel;
+		data->recv_bulk = btusb_recv_bulk_intel;
+		set_bit(BTUSB_BOOTLOADER, &data->flags);
+	} else {
+		data->recv_event = hci_recv_frame;
+		data->recv_bulk = btusb_recv_bulk;
+	}
 
 	hdev = hci_alloc_dev();
 	if (!hdev)
@@ -2028,6 +2683,11 @@ static int btusb_probe(struct usb_interface *intf,
 	hdev->bus = HCI_USB;
 	hci_set_drvdata(hdev, data);
 
+	if (id->driver_info & BTUSB_AMP)
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_BREDR;
+
 	data->hdev = hdev;
 
 	SET_HCIDEV_DEV(hdev, &intf->dev);
@@ -2050,16 +2710,40 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_INTEL) {
 		hdev->setup = btusb_setup_intel;
 		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_INTEL_NEW) {
+		hdev->send = btusb_send_frame_intel;
+		hdev->setup = btusb_setup_intel_new;
+		hdev->hw_error = btusb_hw_error_intel;
+		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_MARVELL)
 		hdev->set_bdaddr = btusb_set_bdaddr_marvell;
 
+	if (id->driver_info & BTUSB_SWAVE) {
+		set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
+	}
+
 	if (id->driver_info & BTUSB_INTEL_BOOT)
 		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
 
-	/* Interface numbers are hardcoded in the specification */
-	data->isoc = usb_ifnum_to_if(data->udev, 1);
+	if (id->driver_info & BTUSB_ATH3012) {
+		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_AMP) {
+		/* AMP controllers do not support SCO packets */
+		data->isoc = NULL;
+	} else {
+		/* Interface numbers are hardcoded in the specification */
+		data->isoc = usb_ifnum_to_if(data->udev, 1);
+	}
 
 	if (!reset)
 		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
@@ -2153,7 +2837,6 @@ static void btusb_disconnect(struct usb_interface *intf)
 	else if (data->isoc)
 		usb_driver_release_interface(&btusb_driver, data->isoc);
 
-	btusb_free_frags(data);
 	hci_free_dev(hdev);
 }