diff options
Diffstat (limited to 'drivers/bluetooth/hci_bcm.c')
-rw-r--r-- | drivers/bluetooth/hci_bcm.c | 243 |
1 files changed, 196 insertions, 47 deletions
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 707c2d1b84c7..0438a64b8185 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -29,6 +29,7 @@ #include <linux/acpi.h> #include <linux/of.h> #include <linux/property.h> +#include <linux/platform_data/x86/apple.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gpio/consumer.h> @@ -52,7 +53,37 @@ #define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */ -/* device driver resources */ +/** + * struct bcm_device - device driver resources + * @serdev_hu: HCI UART controller struct + * @list: bcm_device_list node + * @dev: physical UART slave + * @name: device name logged by bt_dev_*() functions + * @device_wakeup: BT_WAKE pin, + * assert = Bluetooth device must wake up or remain awake, + * deassert = Bluetooth device may sleep when sleep criteria are met + * @shutdown: BT_REG_ON pin, + * power up or power down Bluetooth device internal regulators + * @set_device_wakeup: callback to toggle BT_WAKE pin + * either by accessing @device_wakeup or by calling @btlp + * @set_shutdown: callback to toggle BT_REG_ON pin + * either by accessing @shutdown or by calling @btpu/@btpd + * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power") + * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up") + * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down") + * @clk: clock used by Bluetooth device + * @clk_enabled: whether @clk is prepared and enabled + * @init_speed: default baudrate of Bluetooth device; + * the host UART is initially set to this baudrate so that + * it can configure the Bluetooth device for @oper_speed + * @oper_speed: preferred baudrate of Bluetooth device; + * set to 0 if @init_speed is already the preferred baudrate + * @irq: interrupt triggered by HOST_WAKE_BT pin + * @irq_active_low: whether @irq is active low + * @hu: pointer to HCI UART controller struct, + * used to disable flow control during runtime suspend and system sleep + * @is_suspended: whether flow control is currently disabled + */ struct bcm_device { /* Must be the first member, hci_serdev.c expects this. */ struct hci_uart serdev_hu; @@ -63,6 +94,11 @@ struct bcm_device { const char *name; struct gpio_desc *device_wakeup; struct gpio_desc *shutdown; + int (*set_device_wakeup)(struct bcm_device *, bool); + int (*set_shutdown)(struct bcm_device *, bool); +#ifdef CONFIG_ACPI + acpi_handle btlp, btpu, btpd; +#endif struct clk *clk; bool clk_enabled; @@ -74,7 +110,7 @@ struct bcm_device { #ifdef CONFIG_PM struct hci_uart *hu; - bool is_suspended; /* suspend/resume flag */ + bool is_suspended; #endif }; @@ -170,11 +206,21 @@ static bool bcm_device_exists(struct bcm_device *device) static int bcm_gpio_set_power(struct bcm_device *dev, bool powered) { - if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) - clk_prepare_enable(dev->clk); + int err; - gpiod_set_value(dev->shutdown, powered); - gpiod_set_value(dev->device_wakeup, powered); + if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) { + err = clk_prepare_enable(dev->clk); + if (err) + return err; + } + + err = dev->set_shutdown(dev, powered); + if (err) + goto err_clk_disable; + + err = dev->set_device_wakeup(dev, powered); + if (err) + goto err_revert_shutdown; if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled) clk_disable_unprepare(dev->clk); @@ -182,6 +228,13 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered) dev->clk_enabled = powered; return 0; + +err_revert_shutdown: + dev->set_shutdown(dev, !powered); +err_clk_disable: + if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) + clk_disable_unprepare(dev->clk); + return err; } #ifdef CONFIG_PM @@ -191,9 +244,7 @@ static irqreturn_t bcm_host_wake(int irq, void *data) bt_dev_dbg(bdev, "Host wake IRQ"); - pm_runtime_get(bdev->dev); - pm_runtime_mark_last_busy(bdev->dev); - pm_runtime_put_autosuspend(bdev->dev); + pm_request_resume(bdev->dev); return IRQ_HANDLED; } @@ -218,8 +269,10 @@ static int bcm_request_irq(struct bcm_data *bcm) bdev->irq_active_low ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING, "host_wake", bdev); - if (err) + if (err) { + bdev->irq = err; goto unlock; + } device_init_wakeup(bdev->dev, true); @@ -247,8 +300,8 @@ static const struct bcm_set_sleep_mode default_sleep_params = { /* Irrelevant USB flags */ .usb_auto_sleep = 0, .usb_resume_timeout = 0, + .break_to_host = 0, .pulsed_host_wake = 0, - .break_to_host = 0 }; static int bcm_setup_sleep(struct hci_uart *hu) @@ -304,6 +357,7 @@ static int bcm_open(struct hci_uart *hu) { struct bcm_data *bcm; struct list_head *p; + int err; bt_dev_dbg(hu->hdev, "hu %p", hu); @@ -318,7 +372,10 @@ static int bcm_open(struct hci_uart *hu) mutex_lock(&bcm_device_lock); if (hu->serdev) { - serdev_device_open(hu->serdev); + err = serdev_device_open(hu->serdev); + if (err) + goto err_free; + bcm->dev = serdev_device_get_drvdata(hu->serdev); goto out; } @@ -346,17 +403,33 @@ out: if (bcm->dev) { hu->init_speed = bcm->dev->init_speed; hu->oper_speed = bcm->dev->oper_speed; - bcm_gpio_set_power(bcm->dev, true); + err = bcm_gpio_set_power(bcm->dev, true); + if (err) + goto err_unset_hu; } mutex_unlock(&bcm_device_lock); return 0; + +err_unset_hu: + if (hu->serdev) + serdev_device_close(hu->serdev); +#ifdef CONFIG_PM + else + bcm->dev->hu = NULL; +#endif +err_free: + mutex_unlock(&bcm_device_lock); + hu->priv = NULL; + kfree(bcm); + return err; } static int bcm_close(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; struct bcm_device *bdev = NULL; + int err; bt_dev_dbg(hu->hdev, "hu %p", hu); @@ -374,16 +447,17 @@ static int bcm_close(struct hci_uart *hu) } if (bdev) { - bcm_gpio_set_power(bdev, false); -#ifdef CONFIG_PM - pm_runtime_disable(bdev->dev); - pm_runtime_set_suspended(bdev->dev); - - if (device_can_wakeup(bdev->dev)) { + if (IS_ENABLED(CONFIG_PM) && bdev->irq > 0) { devm_free_irq(bdev->dev, bdev->irq, bdev); device_init_wakeup(bdev->dev, false); + pm_runtime_disable(bdev->dev); } -#endif + + err = bcm_gpio_set_power(bdev, false); + if (err) + bt_dev_err(hu->hdev, "Failed to power down"); + else + pm_runtime_set_suspended(bdev->dev); } mutex_unlock(&bcm_device_lock); @@ -512,11 +586,8 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count) } else if (!bcm->rx_skb) { /* Delay auto-suspend when receiving completed packet */ mutex_lock(&bcm_device_lock); - if (bcm->dev && bcm_device_exists(bcm->dev)) { - pm_runtime_get(bcm->dev->dev); - pm_runtime_mark_last_busy(bcm->dev->dev); - pm_runtime_put_autosuspend(bcm->dev->dev); - } + if (bcm->dev && bcm_device_exists(bcm->dev)) + pm_request_resume(bcm->dev->dev); mutex_unlock(&bcm_device_lock); } @@ -566,6 +637,7 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu) static int bcm_suspend_device(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); + int err; bt_dev_dbg(bdev, ""); @@ -577,27 +649,37 @@ static int bcm_suspend_device(struct device *dev) } /* Suspend the device */ - if (bdev->device_wakeup) { - gpiod_set_value(bdev->device_wakeup, false); - bt_dev_dbg(bdev, "suspend, delaying 15 ms"); - mdelay(15); + err = bdev->set_device_wakeup(bdev, false); + if (err) { + if (bdev->is_suspended && bdev->hu) { + bdev->is_suspended = false; + hci_uart_set_flow_control(bdev->hu, false); + } + return -EBUSY; } + bt_dev_dbg(bdev, "suspend, delaying 15 ms"); + msleep(15); + return 0; } static int bcm_resume_device(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); + int err; bt_dev_dbg(bdev, ""); - if (bdev->device_wakeup) { - gpiod_set_value(bdev->device_wakeup, true); - bt_dev_dbg(bdev, "resume, delaying 15 ms"); - mdelay(15); + err = bdev->set_device_wakeup(bdev, true); + if (err) { + dev_err(dev, "Failed to power up\n"); + return err; } + bt_dev_dbg(bdev, "resume, delaying 15 ms"); + msleep(15); + /* When this executes, the device has woken up already */ if (bdev->is_suspended && bdev->hu) { bdev->is_suspended = false; @@ -632,7 +714,7 @@ static int bcm_suspend(struct device *dev) if (pm_runtime_active(dev)) bcm_suspend_device(dev); - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev) && bdev->irq > 0) { error = enable_irq_wake(bdev->irq); if (!error) bt_dev_dbg(bdev, "BCM irq: enabled"); @@ -648,6 +730,7 @@ unlock: static int bcm_resume(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); + int err = 0; bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended); @@ -662,19 +745,21 @@ static int bcm_resume(struct device *dev) if (!bdev->hu) goto unlock; - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev) && bdev->irq > 0) { disable_irq_wake(bdev->irq); bt_dev_dbg(bdev, "BCM irq: disabled"); } - bcm_resume_device(dev); + err = bcm_resume_device(dev); unlock: mutex_unlock(&bcm_device_lock); - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); + if (!err) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } return 0; } @@ -771,25 +856,84 @@ static int bcm_resource(struct acpi_resource *ares, void *data) return 0; } + +static int bcm_apple_set_device_wakeup(struct bcm_device *dev, bool awake) +{ + if (ACPI_FAILURE(acpi_execute_simple_method(dev->btlp, NULL, !awake))) + return -EIO; + + return 0; +} + +static int bcm_apple_set_shutdown(struct bcm_device *dev, bool powered) +{ + if (ACPI_FAILURE(acpi_evaluate_object(powered ? dev->btpu : dev->btpd, + NULL, NULL, NULL))) + return -EIO; + + return 0; +} + +static int bcm_apple_get_resources(struct bcm_device *dev) +{ + struct acpi_device *adev = ACPI_COMPANION(dev->dev); + const union acpi_object *obj; + + if (!adev || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTLP", &dev->btlp)) || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPU", &dev->btpu)) || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPD", &dev->btpd))) + return -ENODEV; + + if (!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, &obj) && + obj->buffer.length == 8) + dev->init_speed = *(u64 *)obj->buffer.pointer; + + dev->set_device_wakeup = bcm_apple_set_device_wakeup; + dev->set_shutdown = bcm_apple_set_shutdown; + + return 0; +} +#else +static inline int bcm_apple_get_resources(struct bcm_device *dev) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_ACPI */ +static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake) +{ + gpiod_set_value(dev->device_wakeup, awake); + return 0; +} + +static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered) +{ + gpiod_set_value(dev->shutdown, powered); + return 0; +} + static int bcm_get_resources(struct bcm_device *dev) { dev->name = dev_name(dev->dev); + if (x86_apple_machine && !bcm_apple_get_resources(dev)) + return 0; + dev->clk = devm_clk_get(dev->dev, NULL); - dev->device_wakeup = devm_gpiod_get_optional(dev->dev, - "device-wakeup", - GPIOD_OUT_LOW); + dev->device_wakeup = devm_gpiod_get(dev->dev, "device-wakeup", + GPIOD_OUT_LOW); if (IS_ERR(dev->device_wakeup)) return PTR_ERR(dev->device_wakeup); - dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown", - GPIOD_OUT_LOW); + dev->shutdown = devm_gpiod_get(dev->dev, "shutdown", GPIOD_OUT_LOW); if (IS_ERR(dev->shutdown)) return PTR_ERR(dev->shutdown); + dev->set_device_wakeup = bcm_gpio_set_device_wakeup; + dev->set_shutdown = bcm_gpio_set_shutdown; + /* IRQ can be declared in ACPI table as Interrupt or GpioInt */ if (dev->irq <= 0) { struct gpio_desc *gpio; @@ -802,7 +946,7 @@ static int bcm_get_resources(struct bcm_device *dev) dev->irq = gpiod_to_irq(gpio); } - dev_info(dev->dev, "BCM irq: %d\n", dev->irq); + dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq); return 0; } @@ -892,7 +1036,9 @@ static int bcm_probe(struct platform_device *pdev) list_add_tail(&dev->list, &bcm_device_list); mutex_unlock(&bcm_device_lock); - bcm_gpio_set_power(dev, false); + ret = bcm_gpio_set_power(dev, false); + if (ret) + dev_err(&pdev->dev, "Failed to power down\n"); return 0; } @@ -939,6 +1085,7 @@ static const struct acpi_device_id bcm_acpi_match[] = { { "BCM2E65", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, + { "BCM2E72", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7E", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, @@ -993,7 +1140,9 @@ static int bcm_serdev_probe(struct serdev_device *serdev) if (err) return err; - bcm_gpio_set_power(bcmdev, false); + err = bcm_gpio_set_power(bcmdev, false); + if (err) + dev_err(&serdev->dev, "Failed to power down\n"); return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto); } |