diff options
Diffstat (limited to 'drivers/bluetooth/hci_qca.c')
-rw-r--r-- | drivers/bluetooth/hci_qca.c | 114 |
1 files changed, 93 insertions, 21 deletions
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index dc6551d65912..53deea2eb7b4 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -218,6 +218,7 @@ struct qca_power { struct qca_serdev { struct hci_uart serdev_hu; struct gpio_desc *bt_en; + struct gpio_desc *sw_ctrl; struct clk *susclk; enum qca_btsoc_type btsoc_type; struct qca_power *bt_power; @@ -604,7 +605,8 @@ static int qca_open(struct hci_uart *hu) if (hu->serdev) { qcadev = serdev_device_get_drvdata(hu->serdev); - if (qca_is_wcn399x(qcadev->btsoc_type)) + if (qca_is_wcn399x(qcadev->btsoc_type) || + qca_is_wcn6750(qcadev->btsoc_type)) hu->init_speed = qcadev->init_speed; if (qcadev->oper_speed) @@ -1308,7 +1310,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS)); /* Give the controller time to process the request */ - if (qca_is_wcn399x(qca_soc_type(hu))) + if (qca_is_wcn399x(qca_soc_type(hu)) || + qca_is_wcn6750(qca_soc_type(hu))) usleep_range(1000, 10000); else msleep(300); @@ -1384,7 +1387,8 @@ static unsigned int qca_get_speed(struct hci_uart *hu, static int qca_check_speeds(struct hci_uart *hu) { - if (qca_is_wcn399x(qca_soc_type(hu))) { + if (qca_is_wcn399x(qca_soc_type(hu)) || + qca_is_wcn6750(qca_soc_type(hu))) { if (!qca_get_speed(hu, QCA_INIT_SPEED) && !qca_get_speed(hu, QCA_OPER_SPEED)) return -EINVAL; @@ -1417,7 +1421,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type) /* Disable flow control for wcn3990 to deassert RTS while * changing the baudrate of chip and host. */ - if (qca_is_wcn399x(soc_type)) + if (qca_is_wcn399x(soc_type) || + qca_is_wcn6750(soc_type)) hci_uart_set_flow_control(hu, true); if (soc_type == QCA_WCN3990) { @@ -1434,7 +1439,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type) host_set_baudrate(hu, speed); error: - if (qca_is_wcn399x(soc_type)) + if (qca_is_wcn399x(soc_type) || + qca_is_wcn6750(soc_type)) hci_uart_set_flow_control(hu, false); if (soc_type == QCA_WCN3990) { @@ -1585,10 +1591,12 @@ static bool qca_prevent_wake(struct hci_dev *hdev) return !wakeup; } -static int qca_wcn3990_init(struct hci_uart *hu) +static int qca_regulator_init(struct hci_uart *hu) { + enum qca_btsoc_type soc_type = qca_soc_type(hu); struct qca_serdev *qcadev; int ret; + bool sw_ctrl_state; /* Check for vregs status, may be hci down has turned * off the voltage regulator. @@ -1607,16 +1615,33 @@ static int qca_wcn3990_init(struct hci_uart *hu) } } - /* Forcefully enable wcn3990 to enter in to boot mode. */ - host_set_baudrate(hu, 2400); - ret = qca_send_power_pulse(hu, false); - if (ret) - return ret; + if (qca_is_wcn399x(soc_type)) { + /* Forcefully enable wcn399x to enter in to boot mode. */ + host_set_baudrate(hu, 2400); + ret = qca_send_power_pulse(hu, false); + if (ret) + return ret; + } + + /* For wcn6750 need to enable gpio bt_en */ + if (qcadev->bt_en) { + gpiod_set_value_cansleep(qcadev->bt_en, 0); + msleep(50); + gpiod_set_value_cansleep(qcadev->bt_en, 1); + msleep(50); + if (qcadev->sw_ctrl) { + sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl); + bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state); + } + } qca_set_speed(hu, QCA_INIT_SPEED); - ret = qca_send_power_pulse(hu, true); - if (ret) - return ret; + + if (qca_is_wcn399x(soc_type)) { + ret = qca_send_power_pulse(hu, true); + if (ret) + return ret; + } /* Now the device is in ready state to communicate with host. * To sync host with device we need to reopen port. @@ -1649,8 +1674,9 @@ static int qca_power_on(struct hci_dev *hdev) if (!hu->serdev) return 0; - if (qca_is_wcn399x(soc_type)) { - ret = qca_wcn3990_init(hu); + if (qca_is_wcn399x(soc_type) || + qca_is_wcn6750(soc_type)) { + ret = qca_regulator_init(hu); } else { qcadev = serdev_device_get_drvdata(hu->serdev); if (qcadev->bt_en) { @@ -1689,7 +1715,8 @@ static int qca_setup(struct hci_uart *hu) set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); bt_dev_info(hdev, "setting up %s", - qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390"); + qca_is_wcn399x(soc_type) ? "wcn399x" : + (soc_type == QCA_WCN6750) ? "wcn6750" : "ROME/QCA6390"); qca->memdump_state = QCA_MEMDUMP_IDLE; @@ -1700,7 +1727,8 @@ retry: clear_bit(QCA_SSR_TRIGGERED, &qca->flags); - if (qca_is_wcn399x(soc_type)) { + if (qca_is_wcn399x(soc_type) || + qca_is_wcn6750(soc_type)) { set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); ret = qca_read_soc_version(hdev, &ver, soc_type); @@ -1720,7 +1748,8 @@ retry: qca_baudrate = qca_get_baudrate_value(speed); } - if (!qca_is_wcn399x(soc_type)) { + if (!(qca_is_wcn399x(soc_type) || + qca_is_wcn6750(soc_type))) { /* Get QCA version information */ ret = qca_read_soc_version(hdev, &ver, soc_type); if (ret) @@ -1828,12 +1857,30 @@ static const struct qca_device_data qca_soc_data_qca6390 = { .num_vregs = 0, }; +static const struct qca_device_data qca_soc_data_wcn6750 = { + .soc_type = QCA_WCN6750, + .vregs = (struct qca_vreg []) { + { "vddio", 5000 }, + { "vddaon", 26000 }, + { "vddbtcxmx", 126000 }, + { "vddrfacmn", 12500 }, + { "vddrfa0p8", 102000 }, + { "vddrfa1p7", 302000 }, + { "vddrfa1p2", 257000 }, + { "vddrfa2p2", 1700000 }, + { "vddasd", 200 }, + }, + .num_vregs = 9, + .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES, +}; + static void qca_power_shutdown(struct hci_uart *hu) { struct qca_serdev *qcadev; struct qca_data *qca = hu->priv; unsigned long flags; enum qca_btsoc_type soc_type = qca_soc_type(hu); + bool sw_ctrl_state; /* From this point we go into power off state. But serial port is * still open, stop queueing the IBS data and flush all the buffered @@ -1856,6 +1903,14 @@ static void qca_power_shutdown(struct hci_uart *hu) host_set_baudrate(hu, 2400); qca_send_power_pulse(hu, false); qca_regulator_disable(qcadev); + } else if (soc_type == QCA_WCN6750) { + gpiod_set_value_cansleep(qcadev->bt_en, 0); + msleep(100); + qca_regulator_disable(qcadev); + if (qcadev->sw_ctrl) { + sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl); + bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state); + } } else if (qcadev->bt_en) { gpiod_set_value_cansleep(qcadev->bt_en, 0); } @@ -1978,7 +2033,9 @@ static int qca_serdev_probe(struct serdev_device *serdev) if (!qcadev->oper_speed) BT_DBG("UART will pick default operating speed"); - if (data && qca_is_wcn399x(data->soc_type)) { + if (data && + (qca_is_wcn399x(data->soc_type) || + qca_is_wcn6750(data->soc_type))) { qcadev->btsoc_type = data->soc_type; qcadev->bt_power = devm_kzalloc(&serdev->dev, sizeof(struct qca_power), @@ -1996,6 +2053,18 @@ static int qca_serdev_probe(struct serdev_device *serdev) qcadev->bt_power->vregs_on = false; + qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable", + GPIOD_OUT_LOW); + if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) { + dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n"); + power_ctrl_enabled = false; + } + + qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl", + GPIOD_IN); + if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750) + dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n"); + qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL); if (IS_ERR(qcadev->susclk)) { dev_err(&serdev->dev, "failed to acquire clk\n"); @@ -2068,7 +2137,9 @@ static void qca_serdev_remove(struct serdev_device *serdev) struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); struct qca_power *power = qcadev->bt_power; - if (qca_is_wcn399x(qcadev->btsoc_type) && power->vregs_on) + if ((qca_is_wcn399x(qcadev->btsoc_type) || + qca_is_wcn6750(qcadev->btsoc_type)) && + power->vregs_on) qca_power_shutdown(&qcadev->serdev_hu); else if (qcadev->susclk) clk_disable_unprepare(qcadev->susclk); @@ -2244,6 +2315,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = { { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990}, { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991}, { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998}, + { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match); |