summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/bluetooth/Kconfig11
-rw-r--r--drivers/bluetooth/Makefile1
-rw-r--r--drivers/bluetooth/btmtksdio.c979
3 files changed, 991 insertions, 0 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 7b2e76e7f22f..b0f9a20401d6 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -379,6 +379,17 @@ config BT_WILINK
Say Y here to compile support for Texas Instrument's WiLink7 driver
into the kernel or say M to compile it as module (btwilink).
+config BT_MTKSDIO
+ tristate "MediaTek HCI SDIO driver"
+ depends on MMC
+ help
+ MediaTek Bluetooth HCI SDIO driver.
+ This driver is required if you want to use MediaTek Bluetooth
+ with SDIO interface.
+
+ Say Y here to compile support for MediaTek Bluetooth SDIO devices
+ into the kernel or say M to compile it as module (btmtksdio).
+
config BT_MTKUART
tristate "MediaTek HCI UART driver"
depends on SERIAL_DEV_BUS
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index b7e393cfc1e3..34887b9b3a85 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
+obj-$(CONFIG_BT_MTKSDIO) += btmtksdio.o
obj-$(CONFIG_BT_MTKUART) += btmtkuart.o
obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
new file mode 100644
index 000000000000..b4b8320f279e
--- /dev/null
+++ b/drivers/bluetooth/btmtksdio.c
@@ -0,0 +1,979 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 MediaTek Inc.
+
+/*
+ * Bluetooth support for MediaTek SDIO devices
+ *
+ * This file is written based on btsdio.c and btmtkuart.c.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/skbuff.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "h4_recv.h"
+
+#define VERSION "0.1"
+
+#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
+#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
+
+struct btmtksdio_data {
+ const char *fwname;
+};
+
+static const struct btmtksdio_data mt7663_data = {
+ .fwname = FIRMWARE_MT7663,
+};
+
+static const struct btmtksdio_data mt7668_data = {
+ .fwname = FIRMWARE_MT7668,
+};
+
+static const struct sdio_device_id btmtksdio_table[] = {
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7663),
+ .driver_data = (kernel_ulong_t)&mt7663_data },
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7668),
+ .driver_data = (kernel_ulong_t)&mt7668_data },
+ { } /* Terminating entry */
+};
+
+#define MTK_REG_CHLPCR 0x4 /* W1S */
+#define C_INT_EN_SET BIT(0)
+#define C_INT_EN_CLR BIT(1)
+#define C_FW_OWN_REQ_SET BIT(8)
+#define C_FW_OWN_REQ_CLR BIT(9)
+
+#define MTK_REG_CSDIOCSR 0x8
+#define SDIO_RE_INIT_EN BIT(0)
+#define SDIO_INT_CTL BIT(2)
+
+#define MTK_REG_CHCR 0xc
+#define C_INT_CLR_CTRL BIT(1)
+
+/* CHISR have the same bits field definition with CHIER */
+#define MTK_REG_CHISR 0x10
+#define MTK_REG_CHIER 0x14
+#define FW_OWN_BACK_INT BIT(0)
+#define RX_DONE_INT BIT(1)
+#define TX_EMPTY BIT(2)
+#define TX_FIFO_OVERFLOW BIT(8)
+#define RX_PKT_LEN GENMASK(31, 16)
+
+#define MTK_REG_CTDR 0x18
+
+#define MTK_REG_CRDR 0x1c
+
+#define MTK_SDIO_BLOCK_SIZE 256
+
+#define BTMTKSDIO_TX_WAIT_VND_EVT 1
+
+enum {
+ MTK_WMT_PATCH_DWNLD = 0x1,
+ MTK_WMT_TEST = 0x2,
+ MTK_WMT_WAKEUP = 0x3,
+ MTK_WMT_HIF = 0x4,
+ MTK_WMT_FUNC_CTRL = 0x6,
+ MTK_WMT_RST = 0x7,
+ MTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+ BTMTK_WMT_INVALID,
+ BTMTK_WMT_PATCH_UNDONE,
+ BTMTK_WMT_PATCH_DONE,
+ BTMTK_WMT_ON_UNDONE,
+ BTMTK_WMT_ON_DONE,
+ BTMTK_WMT_ON_PROGRESS,
+};
+
+struct mtkbtsdio_hdr {
+ __le16 len;
+ __le16 reserved;
+ u8 bt_type;
+} __packed;
+
+struct mtk_wmt_hdr {
+ u8 dir;
+ u8 op;
+ __le16 dlen;
+ u8 flag;
+} __packed;
+
+struct mtk_hci_wmt_cmd {
+ struct mtk_wmt_hdr hdr;
+ u8 data[256];
+} __packed;
+
+struct btmtk_hci_wmt_evt {
+ struct hci_event_hdr hhdr;
+ struct mtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+ struct btmtk_hci_wmt_evt hwhdr;
+ __be16 status;
+} __packed;
+
+struct btmtk_tci_sleep {
+ u8 mode;
+ __le16 duration;
+ __le16 host_duration;
+ u8 host_wakeup_pin;
+ u8 time_compensation;
+} __packed;
+
+struct btmtk_hci_wmt_params {
+ u8 op;
+ u8 flag;
+ u16 dlen;
+ const void *data;
+ u32 *status;
+};
+
+struct btmtksdio_dev {
+ struct hci_dev *hdev;
+ struct sdio_func *func;
+
+ struct work_struct tx_work;
+ unsigned long tx_state;
+ struct sk_buff_head txq;
+
+ struct sk_buff *evt_skb;
+
+ const struct btmtksdio_data *data;
+};
+
+static int mtk_hci_wmt_sync(struct hci_dev *hdev,
+ struct btmtk_hci_wmt_params *wmt_params)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+ u32 hlen, status = BTMTK_WMT_INVALID;
+ struct btmtk_hci_wmt_evt *wmt_evt;
+ struct mtk_hci_wmt_cmd wc;
+ struct mtk_wmt_hdr *hdr;
+ int err;
+
+ hlen = sizeof(*hdr) + wmt_params->dlen;
+ if (hlen > 255)
+ return -EINVAL;
+
+ hdr = (struct mtk_wmt_hdr *)&wc;
+ hdr->dir = 1;
+ hdr->op = wmt_params->op;
+ hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+ hdr->flag = wmt_params->flag;
+ memcpy(wc.data, wmt_params->data, wmt_params->dlen);
+
+ set_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+
+ err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
+ if (err < 0) {
+ clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+ return err;
+ }
+
+ /* The vendor specific WMT commands are all answered by a vendor
+ * specific event and will not have the Command Status or Command
+ * Complete as with usual HCI command flow control.
+ *
+ * After sending the command, wait for BTMTKSDIO_TX_WAIT_VND_EVT
+ * state to be cleared. The driver specific event receive routine
+ * will clear that state and with that indicate completion of the
+ * WMT command.
+ */
+ err = wait_on_bit_timeout(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT,
+ TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Execution of wmt command interrupted");
+ clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+ return err;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Execution of wmt command timed out");
+ clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+ return -ETIMEDOUT;
+ }
+
+ /* Parse and handle the return WMT event */
+ wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
+ if (wmt_evt->whdr.op != hdr->op) {
+ bt_dev_err(hdev, "Wrong op received %d expected %d",
+ wmt_evt->whdr.op, hdr->op);
+ err = -EIO;
+ goto err_free_skb;
+ }
+
+ switch (wmt_evt->whdr.op) {
+ case MTK_WMT_SEMAPHORE:
+ if (wmt_evt->whdr.flag == 2)
+ status = BTMTK_WMT_PATCH_UNDONE;
+ else
+ status = BTMTK_WMT_PATCH_DONE;
+ break;
+ case MTK_WMT_FUNC_CTRL:
+ wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+ if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+ status = BTMTK_WMT_ON_DONE;
+ else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+ status = BTMTK_WMT_ON_PROGRESS;
+ else
+ status = BTMTK_WMT_ON_UNDONE;
+ break;
+ }
+
+ if (wmt_params->status)
+ *wmt_params->status = status;
+
+err_free_skb:
+ kfree_skb(bdev->evt_skb);
+ bdev->evt_skb = NULL;
+
+ return err;
+}
+
+static int btmtksdio_tx_packet(struct btmtksdio_dev *bdev,
+ struct sk_buff *skb)
+{
+ struct mtkbtsdio_hdr *sdio_hdr;
+ int err;
+
+ /* Make sure that there are enough rooms for SDIO header */
+ if (unlikely(skb_headroom(skb) < sizeof(*sdio_hdr))) {
+ err = pskb_expand_head(skb, sizeof(*sdio_hdr), 0,
+ GFP_ATOMIC);
+ if (err < 0)
+ return err;
+ }
+
+ /* Prepend MediaTek SDIO Specific Header */
+ skb_push(skb, sizeof(*sdio_hdr));
+
+ sdio_hdr = (void *)skb->data;
+ sdio_hdr->len = cpu_to_le16(skb->len);
+ sdio_hdr->reserved = cpu_to_le16(0);
+ sdio_hdr->bt_type = hci_skb_pkt_type(skb);
+
+ err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
+ round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
+ if (err < 0)
+ goto err_skb_pull;
+
+ bdev->hdev->stat.byte_tx += skb->len;
+
+ kfree_skb(skb);
+
+ return 0;
+
+err_skb_pull:
+ skb_pull(skb, sizeof(*sdio_hdr));
+
+ return err;
+}
+
+static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev)
+{
+ return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL);
+}
+
+static void btmtksdio_tx_work(struct work_struct *work)
+{
+ struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev,
+ tx_work);
+ struct sk_buff *skb;
+ int err;
+
+ sdio_claim_host(bdev->func);
+
+ while ((skb = skb_dequeue(&bdev->txq))) {
+ err = btmtksdio_tx_packet(bdev, skb);
+ if (err < 0) {
+ bdev->hdev->stat.err_tx++;
+ skb_queue_head(&bdev->txq, skb);
+ break;
+ }
+ }
+
+ sdio_release_host(bdev->func);
+}
+
+static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct hci_event_hdr *hdr = (void *)skb->data;
+ int err;
+
+ /* Fix up the vendor event id with 0xff for vendor specific instead
+ * of 0xe4 so that event send via monitoring socket can be parsed
+ * properly.
+ */
+ if (hdr->evt == 0xe4)
+ hdr->evt = HCI_EV_VENDOR;
+
+ /* When someone waits for the WMT event, the skb is being cloned
+ * and being processed the events from there then.
+ */
+ if (test_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) {
+ bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
+ if (!bdev->evt_skb) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ }
+
+ err = hci_recv_frame(hdev, skb);
+ if (err < 0)
+ goto err_free_skb;
+
+ if (hdr->evt == HCI_EV_VENDOR) {
+ if (test_and_clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT,
+ &bdev->tx_state)) {
+ /* Barrier to sync with other CPUs */
+ smp_mb__after_atomic();
+ wake_up_bit(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT);
+ }
+ }
+
+ return 0;
+
+err_free_skb:
+ kfree_skb(bdev->evt_skb);
+ bdev->evt_skb = NULL;
+
+err_out:
+ return err;
+}
+
+static const struct h4_recv_pkt mtk_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = btmtksdio_recv_event },
+};
+
+static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size)
+{
+ const struct h4_recv_pkt *pkts = mtk_recv_pkts;
+ int pkts_count = ARRAY_SIZE(mtk_recv_pkts);
+ struct mtkbtsdio_hdr *sdio_hdr;
+ unsigned char *old_data;
+ unsigned int old_len;
+ int err, i, pad_size;
+ struct sk_buff *skb;
+ u16 dlen;
+
+ if (rx_size < sizeof(*sdio_hdr))
+ return -EILSEQ;
+
+ /* A SDIO packet is exactly containing a Bluetooth packet */
+ skb = bt_skb_alloc(rx_size, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_put(skb, rx_size);
+
+ err = sdio_readsb(bdev->func, skb->data, MTK_REG_CRDR, rx_size);
+ if (err < 0)
+ goto err_kfree_skb;
+
+ /* Keep old data for dump the content in case of some error is
+ * caught in the following packet parsing.
+ */
+ old_data = skb->data;
+ old_len = skb->len;
+
+ bdev->hdev->stat.byte_rx += rx_size;
+
+ sdio_hdr = (void *)skb->data;
+
+ /* We assume the default error as -EILSEQ simply to make the error path
+ * be cleaner.
+ */
+ err = -EILSEQ;
+
+ if (rx_size != le16_to_cpu(sdio_hdr->len)) {
+ bt_dev_err(bdev->hdev, "Rx size in sdio header is mismatched ");
+ goto err_kfree_skb;
+ }
+
+ hci_skb_pkt_type(skb) = sdio_hdr->bt_type;
+
+ /* Remove MediaTek SDIO header */
+ skb_pull(skb, sizeof(*sdio_hdr));
+
+ /* We have to dig into the packet to get payload size and then know how
+ * many padding bytes at the tail, these padding bytes should be removed
+ * before the packet is indicated to the core layer.
+ */
+ for (i = 0; i < pkts_count; i++) {
+ if (sdio_hdr->bt_type == (&pkts[i])->type)
+ break;
+ }
+
+ if (i >= pkts_count) {
+ bt_dev_err(bdev->hdev, "Invalid bt type 0x%02x",
+ sdio_hdr->bt_type);
+ goto err_kfree_skb;
+ }
+
+ /* Remaining bytes cannot hold a header*/
+ if (skb->len < (&pkts[i])->hlen) {
+ bt_dev_err(bdev->hdev, "The size of bt header is mismatched");
+ goto err_kfree_skb;
+ }
+
+ switch ((&pkts[i])->lsize) {
+ case 1:
+ dlen = skb->data[(&pkts[i])->loff];
+ break;
+ case 2:
+ dlen = get_unaligned_le16(skb->data +
+ (&pkts[i])->loff);
+ break;
+ default:
+ goto err_kfree_skb;
+ }
+
+ pad_size = skb->len - (&pkts[i])->hlen - dlen;
+
+ /* Remaining bytes cannot hold a payload */
+ if (pad_size < 0) {
+ bt_dev_err(bdev->hdev, "The size of bt payload is mismatched");
+ goto err_kfree_skb;
+ }
+
+ /* Remove padding bytes */
+ skb_trim(skb, skb->len - pad_size);
+
+ /* Complete frame */
+ (&pkts[i])->recv(bdev->hdev, skb);
+
+ return 0;
+
+err_kfree_skb:
+ print_hex_dump(KERN_ERR, "err sdio rx: ", DUMP_PREFIX_NONE, 4, 1,
+ old_data, old_len, true);
+ kfree_skb(skb);
+
+ return err;
+}
+
+static void btmtksdio_interrupt(struct sdio_func *func)
+{
+ struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+ u32 int_status;
+ u16 rx_size;
+
+ /* Disable interrupt */
+ sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
+
+ int_status = sdio_readl(func, MTK_REG_CHISR, NULL);
+
+ /* Ack an interrupt as soon as possible before any operation on
+ * hardware.
+ *
+ * Note that we don't ack any status during operations to avoid race
+ * condition between the host and the device such as it's possible to
+ * mistakenly ack RX_DONE for the next packet and then cause interrupts
+ * not be raised again but there is still pending data in the hardware
+ * FIFO.
+ */
+ sdio_writel(func, int_status, MTK_REG_CHISR, NULL);
+
+ if (unlikely(!int_status))
+ bt_dev_err(bdev->hdev, "CHISR is 0\n");
+
+ if (int_status & FW_OWN_BACK_INT)
+ bt_dev_dbg(bdev->hdev, "Get fw own back\n");
+
+ if (int_status & TX_EMPTY)
+ schedule_work(&bdev->tx_work);
+ else if (unlikely(int_status & TX_FIFO_OVERFLOW))
+ bt_dev_warn(bdev->hdev, "Tx fifo overflow\n");
+
+ if (int_status & RX_DONE_INT) {
+ rx_size = (int_status & RX_PKT_LEN) >> 16;
+
+ if (btmtksdio_rx_packet(bdev, rx_size) < 0)
+ bdev->hdev->stat.err_rx++;
+ }
+
+ /* Enable interrupt */
+ sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, 0);
+}
+
+static int btmtksdio_open(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ int err;
+ u32 status;
+
+ sdio_claim_host(bdev->func);
+
+ err = sdio_enable_func(bdev->func);
+ if (err < 0)
+ goto err_release_host;
+
+ /* Get ownership from the device */
+ sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto err_disable_func;
+
+ err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+ status & C_FW_OWN_REQ_SET, 2000, 1000000);
+ if (err < 0) {
+ bt_dev_err(bdev->hdev, "Cannot get ownership from device");
+ goto err_disable_func;
+ }
+
+ /* Disable interrupt & mask out all interrupt sources */
+ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto err_disable_func;
+
+ sdio_writel(bdev->func, 0, MTK_REG_CHIER, &err);
+ if (err < 0)
+ goto err_disable_func;
+
+ err = sdio_claim_irq(bdev->func, btmtksdio_interrupt);
+ if (err < 0)
+ goto err_disable_func;
+
+ err = sdio_set_block_size(bdev->func, MTK_SDIO_BLOCK_SIZE);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* SDIO CMD 5 allows the SDIO device back to idle state an
+ * synchronous interrupt is supported in SDIO 4-bit mode
+ */
+ sdio_writel(bdev->func, SDIO_INT_CTL | SDIO_RE_INIT_EN,
+ MTK_REG_CSDIOCSR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* Setup write-1-clear for CHISR register */
+ sdio_writel(bdev->func, C_INT_CLR_CTRL, MTK_REG_CHCR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* Setup interrupt sources */
+ sdio_writel(bdev->func, RX_DONE_INT | TX_EMPTY | TX_FIFO_OVERFLOW,
+ MTK_REG_CHIER, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ /* Enable interrupt */
+ sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ sdio_release_host(bdev->func);
+
+ return 0;
+
+err_release_irq:
+ sdio_release_irq(bdev->func);
+
+err_disable_func:
+ sdio_disable_func(bdev->func);
+
+err_release_host:
+ sdio_release_host(bdev->func);
+
+ return err;
+}
+
+static int btmtksdio_close(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ u32 status;
+ int err;
+
+ sdio_claim_host(bdev->func);
+
+ /* Disable interrupt */
+ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
+
+ sdio_release_irq(bdev->func);
+
+ /* Return ownership to the device */
+ sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, NULL);
+
+ err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+ !(status & C_FW_OWN_REQ_SET), 2000, 1000000);
+ if (err < 0)
+ bt_dev_err(bdev->hdev, "Cannot return ownership to device");
+
+ sdio_disable_func(bdev->func);
+
+ sdio_release_host(bdev->func);
+
+ return 0;
+}
+
+static int btmtksdio_flush(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+ skb_queue_purge(&bdev->txq);
+
+ cancel_work_sync(&bdev->tx_work);
+
+ return 0;
+}
+
+static int btmtksdio_func_query(struct hci_dev *hdev)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ int status, err;
+ u8 param = 0;
+
+ /* Query whether the function is enabled */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 4;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = &status;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query function status (%d)", err);
+ return err;
+ }
+
+ return status;
+}
+
+static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ size_t fw_size;
+ int err, dlen;
+ u8 flag;
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+ return err;
+ }
+
+ fw_ptr = fw->data;
+ fw_size = fw->size;
+
+ /* The size of patch header is 30 bytes, should be skip */
+ if (fw_size < 30) {
+ err = -EINVAL;
+ goto free_fw;
+ }
+
+ fw_size -= 30;
+ fw_ptr += 30;
+ flag = 1;
+
+ wmt_params.op = MTK_WMT_PATCH_DWNLD;
+ wmt_params.status = NULL;
+
+ while (fw_size > 0) {
+ dlen = min_t(int, 250, fw_size);
+
+ /* Tell device the position in sequence */
+ if (fw_size - dlen <= 0)
+ flag = 3;
+ else if (fw_size < fw->size - 30)
+ flag = 2;
+
+ wmt_params.flag = flag;
+ wmt_params.dlen = dlen;
+ wmt_params.data = fw_ptr;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+ err);
+ goto free_fw;
+ }
+
+ fw_size -= dlen;
+ fw_ptr += dlen;
+ }
+
+ wmt_params.op = MTK_WMT_RST;
+ wmt_params.flag = 4;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ /* Activate funciton the firmware providing to */
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+ goto free_fw;
+ }
+
+ /* Wait a few moments for firmware activation done */
+ usleep_range(10000, 12000);
+
+free_fw:
+ release_firmware(fw);
+ return err;
+}
+
+static int btmtksdio_setup(struct hci_dev *hdev)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_params wmt_params;
+ ktime_t calltime, delta, rettime;
+ struct btmtk_tci_sleep tci_sleep;
+ unsigned long long duration;
+ struct sk_buff *skb;
+ int err, status;
+ u8 param = 0x1;
+
+ calltime = ktime_get();
+
+ /* Query whether the firmware is already download */
+ wmt_params.op = MTK_WMT_SEMAPHORE;
+ wmt_params.flag = 1;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = &status;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+ return err;
+ }
+
+ if (status == BTMTK_WMT_PATCH_DONE) {
+ bt_dev_info(hdev, "Firmware already downloaded");
+ goto ignore_setup_fw;
+ }
+
+ /* Setup a firmware which the device definitely requires */
+ err = mtk_setup_firmware(hdev, bdev->data->fwname);
+ if (err < 0)
+ return err;
+
+ignore_setup_fw:
+ /* Query whether the device is already enabled */
+ err = readx_poll_timeout(btmtksdio_func_query, hdev, status,
+ status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+ 2000, 5000000);
+ /* -ETIMEDOUT happens */
+ if (err < 0)
+ return err;
+
+ /* The other errors happen in btusb_mtk_func_query */
+ if (status < 0)
+ return status;
+
+ if (status == BTMTK_WMT_ON_DONE) {
+ bt_dev_info(hdev, "function already on");
+ goto ignore_func_on;
+ }
+
+ /* Enable Bluetooth protocol */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 0;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+ return err;
+ }
+
+ignore_func_on:
+ /* Apply the low power environment setup */
+ tci_sleep.mode = 0x5;
+ tci_sleep.duration = cpu_to_le16(0x640);
+ tci_sleep.host_duration = cpu_to_le16(0x640);
+ tci_sleep.host_wakeup_pin = 0;
+ tci_sleep.time_compensation = 0;
+
+ skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btmtksdio_shutdown(struct hci_dev *hdev)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ u8 param = 0x0;
+ int err;
+
+ /* Disable the device */
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 0;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+ switch (hci_skb_pkt_type(skb)) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+
+ default:
+ return -EILSEQ;
+ }
+
+ skb_queue_tail(&bdev->txq, skb);
+
+ schedule_work(&bdev->tx_work);
+
+ return 0;
+}
+
+static int btmtksdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct btmtksdio_dev *bdev;
+ struct hci_dev *hdev;
+ int err;
+
+ bdev = devm_kzalloc(&func->dev, sizeof(*bdev), GFP_KERNEL);
+ if (!bdev)
+ return -ENOMEM;
+
+ bdev->data = (void *)id->driver_data;
+ if (!bdev->data)
+ return -ENODEV;
+
+ bdev->func = func;
+
+ INIT_WORK(&bdev->tx_work, btmtksdio_tx_work);
+ skb_queue_head_init(&bdev->txq);
+
+ /* Initialize and register HCI device */
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ dev_err(&func->dev, "Can't allocate HCI device\n");
+ return -ENOMEM;
+ }
+
+ bdev->hdev = hdev;
+
+ hdev->bus = HCI_SDIO;
+ hci_set_drvdata(hdev, bdev);
+
+ hdev->open = btmtksdio_open;
+ hdev->close = btmtksdio_close;
+ hdev->flush = btmtksdio_flush;
+ hdev->setup = btmtksdio_setup;
+ hdev->shutdown = btmtksdio_shutdown;
+ hdev->send = btmtksdio_send_frame;
+ SET_HCIDEV_DEV(hdev, &func->dev);
+
+ hdev->manufacturer = 70;
+ set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+ err = hci_register_dev(hdev);
+ if (err < 0) {
+ dev_err(&func->dev, "Can't register HCI device\n");
+ hci_free_dev(hdev);
+ return err;
+ }
+
+ sdio_set_drvdata(func, bdev);
+
+ return 0;
+}
+
+static void btmtksdio_remove(struct sdio_func *func)
+{
+ struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+ struct hci_dev *hdev;
+
+ if (!bdev)
+ return;
+
+ hdev = bdev->hdev;
+
+ sdio_set_drvdata(func, NULL);
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+}
+
+static struct sdio_driver btmtksdio_driver = {
+ .name = "btmtksdio",
+ .probe = btmtksdio_probe,
+ .remove = btmtksdio_remove,
+ .id_table = btmtksdio_table,
+};
+
+static int __init btmtksdio_init(void)
+{
+ BT_INFO("MediaTek Bluetooth SDIO driver ver %s", VERSION);
+
+ return sdio_register_driver(&btmtksdio_driver);
+}
+
+static void __exit btmtksdio_exit(void)
+{
+ sdio_unregister_driver(&btmtksdio_driver);
+}
+
+module_init(btmtksdio_init);
+module_exit(btmtksdio_exit);
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek Bluetooth SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_MT7663);
+MODULE_FIRMWARE(FIRMWARE_MT7668);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 10:50:23 +0100