diff options
Diffstat (limited to 'drivers/char/ftape/zftape/zftape-ctl.c')
| -rw-r--r-- | drivers/char/ftape/zftape/zftape-ctl.c | 1418 |
1 files changed, 1418 insertions, 0 deletions
diff --git a/drivers/char/ftape/zftape/zftape-ctl.c b/drivers/char/ftape/zftape/zftape-ctl.c new file mode 100644 index 000000000000..6c7874e5c199 --- /dev/null +++ b/drivers/char/ftape/zftape/zftape-ctl.c @@ -0,0 +1,1418 @@ +/* + * Copyright (C) 1996, 1997 Claus-Justus Heine + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-ctl.c,v $ + * $Revision: 1.2.6.2 $ + * $Date: 1997/11/14 18:07:33 $ + * + * This file contains the non-read/write zftape functions + * for the QIC-40/80/3010/3020 floppy-tape driver for Linux. + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/fcntl.h> + +#include <linux/zftape.h> + +#include <asm/uaccess.h> + +#include "../zftape/zftape-init.h" +#include "../zftape/zftape-eof.h" +#include "../zftape/zftape-ctl.h" +#include "../zftape/zftape-write.h" +#include "../zftape/zftape-read.h" +#include "../zftape/zftape-rw.h" +#include "../zftape/zftape-vtbl.h" + +/* Global vars. + */ +int zft_write_protected; /* this is when cartridge rdonly or O_RDONLY */ +int zft_header_read; +int zft_offline; +unsigned int zft_unit; +int zft_resid; +int zft_mt_compression; + +/* Local vars. + */ +static int going_offline; + +typedef int (mt_fun)(int *argptr); +typedef int (*mt_funp)(int *argptr); +typedef struct +{ + mt_funp function; + unsigned offline : 1; /* op permitted if offline or no_tape */ + unsigned write_protected : 1; /* op permitted if write-protected */ + unsigned not_formatted : 1; /* op permitted if tape not formatted */ + unsigned raw_mode : 1; /* op permitted if zft_mode == 0 */ + unsigned need_idle_state : 1; /* need to call def_idle_state */ + char *name; +} fun_entry; + +static mt_fun mt_dummy, mt_reset, mt_fsr, mt_bsr, mt_rew, mt_offl, mt_nop, + mt_weof, mt_erase, mt_ras2, mt_setblk, mt_setdensity, + mt_seek, mt_tell, mt_reten, mt_eom, mt_fsf, mt_bsf, + mt_fsfm, mt_bsfm, mt_setdrvbuffer, mt_compression; + +static fun_entry mt_funs[]= +{ + {mt_reset , 1, 1, 1, 1, 0, "MT_RESET" }, /* 0 */ + {mt_fsf , 0, 1, 0, 0, 1, "MT_FSF" }, + {mt_bsf , 0, 1, 0, 0, 1, "MT_BSF" }, + {mt_fsr , 0, 1, 0, 1, 1, "MT_FSR" }, + {mt_bsr , 0, 1, 0, 1, 1, "MT_BSR" }, + {mt_weof , 0, 0, 0, 0, 0, "MT_WEOF" }, /* 5 */ + {mt_rew , 0, 1, 1, 1, 0, "MT_REW" }, + {mt_offl , 0, 1, 1, 1, 0, "MT_OFFL" }, + {mt_nop , 1, 1, 1, 1, 0, "MT_NOP" }, + {mt_reten , 0, 1, 1, 1, 0, "MT_RETEN" }, + {mt_bsfm , 0, 1, 0, 0, 1, "MT_BSFM" }, /* 10 */ + {mt_fsfm , 0, 1, 0, 0, 1, "MT_FSFM" }, + {mt_eom , 0, 1, 0, 0, 1, "MT_EOM" }, + {mt_erase , 0, 0, 0, 1, 0, "MT_ERASE" }, + {mt_dummy , 1, 1, 1, 1, 0, "MT_RAS1" }, + {mt_ras2 , 0, 0, 0, 1, 0, "MT_RAS2" }, + {mt_dummy , 1, 1, 1, 1, 0, "MT_RAS3" }, + {mt_dummy , 1, 1, 1, 1, 0, "UNKNOWN" }, + {mt_dummy , 1, 1, 1, 1, 0, "UNKNOWN" }, + {mt_dummy , 1, 1, 1, 1, 0, "UNKNOWN" }, + {mt_setblk , 1, 1, 1, 1, 1, "MT_SETBLK"}, /* 20 */ + {mt_setdensity , 1, 1, 1, 1, 0, "MT_SETDENSITY"}, + {mt_seek , 0, 1, 0, 1, 1, "MT_SEEK" }, + {mt_dummy , 0, 1, 0, 1, 1, "MT_TELL" }, /* wr-only ?! */ + {mt_setdrvbuffer, 1, 1, 1, 1, 0, "MT_SETDRVBUFFER" }, + {mt_dummy , 1, 1, 1, 1, 0, "MT_FSS" }, /* 25 */ + {mt_dummy , 1, 1, 1, 1, 0, "MT_BSS" }, + {mt_dummy , 1, 1, 1, 1, 0, "MT_WSM" }, + {mt_dummy , 1, 1, 1, 1, 0, "MT_LOCK" }, + {mt_dummy , 1, 1, 1, 1, 0, "MT_UNLOCK"}, + {mt_dummy , 1, 1, 1, 1, 0, "MT_LOAD" }, /* 30 */ + {mt_dummy , 1, 1, 1, 1, 0, "MT_UNLOAD"}, + {mt_compression , 1, 1, 1, 0, 1, "MT_COMPRESSION"}, + {mt_dummy , 1, 1, 1, 1, 0, "MT_SETPART"}, + {mt_dummy , 1, 1, 1, 1, 0, "MT_MKPART"} +}; + +#define NR_MT_CMDS NR_ITEMS(mt_funs) + +void zft_reset_position(zft_position *pos) +{ + TRACE_FUN(ft_t_flow); + + pos->seg_byte_pos = + pos->volume_pos = 0; + if (zft_header_read) { + /* need to keep track of the volume table and + * compression map. We therefor simply + * position at the beginning of the first + * volume. This covers old ftape archives as + * well has various flavours of the + * compression map segments. The worst case is + * that the compression map shows up as a + * additional volume in front of all others. + */ + pos->seg_pos = zft_find_volume(0)->start_seg; + pos->tape_pos = zft_calc_tape_pos(pos->seg_pos); + } else { + pos->tape_pos = 0; + pos->seg_pos = -1; + } + zft_just_before_eof = 0; + zft_deblock_segment = -1; + zft_io_state = zft_idle; + zft_zap_read_buffers(); + zft_prevent_flush(); + /* unlock the compresison module if it is loaded. + * The zero arg means not to try to load the module. + */ + if (zft_cmpr_lock(0) == 0) { + (*zft_cmpr_ops->reset)(); /* unlock */ + } + TRACE_EXIT; +} + +static void zft_init_driver(void) +{ + TRACE_FUN(ft_t_flow); + + zft_resid = + zft_header_read = + zft_old_ftape = + zft_offline = + zft_write_protected = + going_offline = + zft_mt_compression = + zft_header_changed = + zft_volume_table_changed = + zft_written_segments = 0; + zft_blk_sz = CONFIG_ZFT_DFLT_BLK_SZ; + zft_reset_position(&zft_pos); /* does most of the stuff */ + ftape_zap_read_buffers(); + ftape_set_state(idle); + TRACE_EXIT; +} + +int zft_def_idle_state(void) +{ + int result = 0; + TRACE_FUN(ft_t_flow); + + if (!zft_header_read) { + result = zft_read_header_segments(); + } else if ((result = zft_flush_buffers()) >= 0 && zft_qic_mode) { + /* don't move past eof + */ + (void)zft_close_volume(&zft_pos); + } + if (ftape_abort_operation() < 0) { + TRACE(ft_t_warn, "ftape_abort_operation() failed"); + result = -EIO; + } + /* clear remaining read buffers */ + zft_zap_read_buffers(); + zft_io_state = zft_idle; + TRACE_EXIT result; +} + +/***************************************************************************** + * * + * functions for the MTIOCTOP commands * + * * + *****************************************************************************/ + +static int mt_dummy(int *dummy) +{ + TRACE_FUN(ft_t_flow); + + TRACE_EXIT -ENOSYS; +} + +static int mt_reset(int *dummy) +{ + TRACE_FUN(ft_t_flow); + + (void)ftape_seek_to_bot(); + TRACE_CATCH(ftape_reset_drive(), + zft_init_driver(); zft_uninit_mem(); zft_offline = 1); + /* fake a re-open of the device. This will set all flage and + * allocate buffers as appropriate. The new tape condition will + * force the open routine to do anything we need. + */ + TRACE_CATCH(_zft_open(-1 /* fake reopen */, 0 /* dummy */),); + TRACE_EXIT 0; +} + +static int mt_fsf(int *arg) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = zft_skip_volumes(*arg, &zft_pos); + zft_just_before_eof = 0; + TRACE_EXIT result; +} + +static int mt_bsf(int *arg) +{ + int result = 0; + TRACE_FUN(ft_t_flow); + + if (*arg != 0) { + result = zft_skip_volumes(-*arg + 1, &zft_pos); + } + TRACE_EXIT result; +} + +static int seek_block(__s64 data_offset, + __s64 block_increment, + zft_position *pos) +{ + int result = 0; + __s64 new_block_pos; + __s64 vol_block_count; + const zft_volinfo *volume; + int exceed; + TRACE_FUN(ft_t_flow); + + volume = zft_find_volume(pos->seg_pos); + if (volume->start_seg == 0 || volume->end_seg == 0) { + TRACE_EXIT -EIO; + } + new_block_pos = (zft_div_blksz(data_offset, volume->blk_sz) + + block_increment); + vol_block_count = zft_div_blksz(volume->size, volume->blk_sz); + if (new_block_pos < 0) { + TRACE(ft_t_noise, + "new_block_pos " LL_X " < 0", LL(new_block_pos)); + zft_resid = (int)new_block_pos; + new_block_pos = 0; + exceed = 1; + } else if (new_block_pos > vol_block_count) { + TRACE(ft_t_noise, + "new_block_pos " LL_X " exceeds size of volume " LL_X, + LL(new_block_pos), LL(vol_block_count)); + zft_resid = (int)(vol_block_count - new_block_pos); + new_block_pos = vol_block_count; + exceed = 1; + } else { + exceed = 0; + } + if (zft_use_compression && volume->use_compression) { + TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),); + result = (*zft_cmpr_ops->seek)(new_block_pos, pos, volume, + zft_deblock_buf); + pos->tape_pos = zft_calc_tape_pos(pos->seg_pos); + pos->tape_pos += pos->seg_byte_pos; + } else { + pos->volume_pos = zft_mul_blksz(new_block_pos, volume->blk_sz); + pos->tape_pos = zft_calc_tape_pos(volume->start_seg); + pos->tape_pos += pos->volume_pos; + pos->seg_pos = zft_calc_seg_byte_coord(&pos->seg_byte_pos, + pos->tape_pos); + } + zft_just_before_eof = volume->size == pos->volume_pos; + if (zft_just_before_eof) { + /* why this? because zft_file_no checks agains start + * and end segment of a volume. We do not want to + * advance to the next volume with this function. + */ + TRACE(ft_t_noise, "set zft_just_before_eof"); + zft_position_before_eof(pos, volume); + } + TRACE(ft_t_noise, "\n" + KERN_INFO "new_seg_pos : %d\n" + KERN_INFO "new_tape_pos: " LL_X "\n" + KERN_INFO "vol_size : " LL_X "\n" + KERN_INFO "seg_byte_pos: %d\n" + KERN_INFO "blk_sz : %d", + pos->seg_pos, LL(pos->tape_pos), + LL(volume->size), pos->seg_byte_pos, + volume->blk_sz); + if (!exceed) { + zft_resid = new_block_pos - zft_div_blksz(pos->volume_pos, + volume->blk_sz); + } + if (zft_resid < 0) { + zft_resid = -zft_resid; + } + TRACE_EXIT ((exceed || zft_resid != 0) && result >= 0) ? -EINVAL : result; +} + +static int mt_fsr(int *arg) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = seek_block(zft_pos.volume_pos, *arg, &zft_pos); + TRACE_EXIT result; +} + +static int mt_bsr(int *arg) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = seek_block(zft_pos.volume_pos, -*arg, &zft_pos); + TRACE_EXIT result; +} + +static int mt_weof(int *arg) +{ + int result; + TRACE_FUN(ft_t_flow); + + TRACE_CATCH(zft_flush_buffers(),); + result = zft_weof(*arg, &zft_pos); + TRACE_EXIT result; +} + +static int mt_rew(int *dummy) +{ + int result; + TRACE_FUN(ft_t_flow); + + if(zft_header_read) { + (void)zft_def_idle_state(); + } + result = ftape_seek_to_bot(); + zft_reset_position(&zft_pos); + TRACE_EXIT result; +} + +static int mt_offl(int *dummy) +{ + int result; + TRACE_FUN(ft_t_flow); + + going_offline= 1; + result = mt_rew(NULL); + TRACE_EXIT result; +} + +static int mt_nop(int *dummy) +{ + TRACE_FUN(ft_t_flow); + /* should we set tape status? + */ + if (!zft_offline) { /* offline includes no_tape */ + (void)zft_def_idle_state(); + } + TRACE_EXIT 0; +} + +static int mt_reten(int *dummy) +{ + int result; + TRACE_FUN(ft_t_flow); + + if(zft_header_read) { + (void)zft_def_idle_state(); + } + result = ftape_seek_to_eot(); + if (result >= 0) { + result = ftape_seek_to_bot(); + } + TRACE_EXIT(result); +} + +static int fsfbsfm(int arg, zft_position *pos) +{ + const zft_volinfo *vtbl; + __s64 block_pos; + TRACE_FUN(ft_t_flow); + + /* What to do? This should seek to the next file-mark and + * position BEFORE. That is, a next write would just extend + * the current file. Well. Let's just seek to the end of the + * current file, if count == 1. If count > 1, then do a + * "mt_fsf(count - 1)", and then seek to the end of that file. + * If count == 0, do nothing + */ + if (arg == 0) { + TRACE_EXIT 0; + } + zft_just_before_eof = 0; + TRACE_CATCH(zft_skip_volumes(arg < 0 ? arg : arg-1, pos), + if (arg > 0) { + zft_resid ++; + }); + vtbl = zft_find_volume(pos->seg_pos); + block_pos = zft_div_blksz(vtbl->size, vtbl->blk_sz); + (void)seek_block(0, block_pos, pos); + if (pos->volume_pos != vtbl->size) { + zft_just_before_eof = 0; + zft_resid = 1; + /* we didn't managed to go there */ + TRACE_ABORT(-EIO, ft_t_err, + "wanted file position " LL_X ", arrived at " LL_X, + LL(vtbl->size), LL(pos->volume_pos)); + } + zft_just_before_eof = 1; + TRACE_EXIT 0; +} + +static int mt_bsfm(int *arg) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = fsfbsfm(-*arg, &zft_pos); + TRACE_EXIT result; +} + +static int mt_fsfm(int *arg) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = fsfbsfm(*arg, &zft_pos); + TRACE_EXIT result; +} + +static int mt_eom(int *dummy) +{ + TRACE_FUN(ft_t_flow); + + zft_skip_to_eom(&zft_pos); + TRACE_EXIT 0; +} + +static int mt_erase(int *dummy) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = zft_erase(); + TRACE_EXIT result; +} + +static int mt_ras2(int *dummy) +{ + int result; + TRACE_FUN(ft_t_flow); + + result = -ENOSYS; + TRACE_EXIT result; +} + +/* Sets the new blocksize in BYTES + * + */ +static int mt_setblk(int *new_size) +{ + TRACE_FUN(ft_t_flow); + + if((unsigned int)(*new_size) > ZFT_MAX_BLK_SZ) { + TRACE_ABORT(-EINVAL, ft_t_info, + "desired blk_sz (%d) should be <= %d bytes", + *new_size, ZFT_MAX_BLK_SZ); + } + if ((*new_size & (FT_SECTOR_SIZE-1)) != 0) { + TRACE_ABORT(-EINVAL, ft_t_info, + "desired blk_sz (%d) must be a multiple of %d bytes", + *new_size, FT_SECTOR_SIZE); + } + if (*new_size == 0) { + if (zft_use_compression) { + TRACE_ABORT(-EINVAL, ft_t_info, + "Variable block size not yet " + "supported with compression"); + } + *new_size = 1; + } + zft_blk_sz = *new_size; + TRACE_EXIT 0; +} + +static int mt_setdensity(int *arg) +{ + TRACE_FUN(ft_t_flow); + + SET_TRACE_LEVEL(*arg); + TRACE(TRACE_LEVEL, "tracing set to %d", TRACE_LEVEL); + if ((int)TRACE_LEVEL != *arg) { + TRACE_EXIT -EINVAL; + } + TRACE_EXIT 0; +} + +static int mt_seek(int *new_block_pos) +{ + int result= 0; + TRACE_FUN(ft_t_any); + + result = seek_block(0, (__s64)*new_block_pos, &zft_pos); + TRACE_EXIT result; +} + +/* OK, this is totally different from SCSI, but the worst thing that can + * happen is that there is not enough defragmentated memory that can be + * allocated. Also, there is a hardwired limit of 16 dma buffers in the + * stock ftape module. This shouldn't bring the system down. + * + * NOTE: the argument specifies the total number of dma buffers to use. + * The driver needs at least 3 buffers to function at all. + * + */ +static int mt_setdrvbuffer(int *cnt) +{ + TRACE_FUN(ft_t_flow); + + if (*cnt < 3) { + TRACE_EXIT -EINVAL; + } + TRACE_CATCH(ftape_set_nr_buffers(*cnt),); + TRACE_EXIT 0; +} +/* return the block position from start of volume + */ +static int mt_tell(int *arg) +{ + TRACE_FUN(ft_t_flow); + + *arg = zft_div_blksz(zft_pos.volume_pos, + zft_find_volume(zft_pos.seg_pos)->blk_sz); + TRACE_EXIT 0; +} + +static int mt_compression(int *arg) +{ + TRACE_FUN(ft_t_flow); + + /* Ok. We could also check whether compression is available at + * all by trying to load the compression module. We could + * also check for a block size of 1 byte which is illegal + * with compression. Instead of doing it here we rely on + * zftape_write() to do the proper checks. + */ + if ((unsigned int)*arg > 1) { + TRACE_EXIT -EINVAL; + } + if (*arg != 0 && zft_blk_sz == 1) { /* variable block size */ + TRACE_ABORT(-EINVAL, ft_t_info, + "Compression not yet supported " + "with variable block size"); + } + zft_mt_compression = *arg; + if ((zft_unit & ZFT_ZIP_MODE) == 0) { + zft_use_compression = zft_mt_compression; + } + TRACE_EXIT 0; +} + +/* check whether write access is allowed. Write access is denied when + * + zft_write_protected == 1 -- this accounts for either hard write + * protection of the cartridge or for + * O_RDONLY access mode of the tape device + * + zft_offline == 1 -- this meany that there is either no tape + * or that the MTOFFLINE ioctl has been + * previously issued (`soft eject') + * + ft_formatted == 0 -- this means that the cartridge is not + * formatted + * Then we distinuguish two cases. When zft_qic_mode is TRUE, then we try + * to emulate a `traditional' (aka SCSI like) UN*X tape device. Therefore we + * deny writes when + * + zft_qic_mode ==1 && + * (!zft_tape_at_lbot() && -- tape no at logical BOT + * !(zft_tape_at_eom() || -- tape not at logical EOM (or EOD) + * (zft_tape_at_eom() && + * zft_old_ftape()))) -- we can't add new volume to tapes + * written by old ftape because ftape + * don't use the volume table + * + * when the drive is in true raw mode (aka /dev/rawft0) then we don't + * care about LBOT and EOM conditions. This device is intended for a + * user level program that wants to truly implement the QIC-80 compliance + * at the logical data layout level of the cartridge, i.e. implement all + * that volume table and volume directory stuff etc.< + */ +int zft_check_write_access(zft_position *pos) +{ + TRACE_FUN(ft_t_flow); + + if (zft_offline) { /* offline includes no_tape */ + TRACE_ABORT(-ENXIO, + ft_t_info, "tape is offline or no cartridge"); + } + if (!ft_formatted) { + TRACE_ABORT(-EACCES, ft_t_info, "tape is not formatted"); + } + if (zft_write_protected) { + TRACE_ABORT(-EACCES, ft_t_info, "cartridge write protected"); + } + if (zft_qic_mode) { + /* check BOT condition */ + if (!zft_tape_at_lbot(pos)) { + /* protect cartridges written by old ftape if + * not at BOT because they use the vtbl + * segment for storing data + */ + if (zft_old_ftape) { + TRACE_ABORT(-EACCES, ft_t_warn, + "Cannot write to cartridges written by old ftape when not at BOT"); + } + /* not at BOT, but allow writes at EOD, of course + */ + if (!zft_tape_at_eod(pos)) { + TRACE_ABORT(-EACCES, ft_t_info, + "tape not at BOT and not at EOD"); + } + } + /* fine. Now the tape is either at BOT or at EOD. */ + } + /* or in raw mode in which case we don't care about BOT and EOD */ + TRACE_EXIT 0; +} + +/* OPEN routine called by kernel-interface code + * + * NOTE: this is also called by mt_reset() with dev_minor == -1 + * to fake a reopen after a reset. + */ +int _zft_open(unsigned int dev_minor, unsigned int access_mode) +{ + static unsigned int tape_unit; + static unsigned int file_access_mode; + int result; + TRACE_FUN(ft_t_flow); + + if ((int)dev_minor == -1) { + /* fake reopen */ + zft_unit = tape_unit; + access_mode = file_access_mode; + zft_init_driver(); /* reset all static data to defaults */ + } else { + tape_unit = dev_minor; + file_access_mode = access_mode; + if ((result = ftape_enable(FTAPE_SEL(dev_minor))) < 0) { + TRACE_ABORT(-ENXIO, ft_t_err, + "ftape_enable failed: %d", result); + } + if (ft_new_tape || ft_no_tape || !ft_formatted || + (FTAPE_SEL(zft_unit) != FTAPE_SEL(dev_minor)) || + (zft_unit & ZFT_RAW_MODE) != (dev_minor & ZFT_RAW_MODE)) { + /* reset all static data to defaults, + */ + zft_init_driver(); + } + zft_unit = dev_minor; + } + zft_set_flags(zft_unit); /* decode the minor bits */ + if (zft_blk_sz == 1 && zft_use_compression) { + ftape_disable(); /* resets ft_no_tape */ + TRACE_ABORT(-ENODEV, ft_t_warn, "Variable block size not yet " + "supported with compression"); + } + /* no need for most of the buffers when no tape or not + * formatted. for the read/write operations, it is the + * regardless whether there is no tape, a not-formatted tape + * or the whether the driver is soft offline. + * Nevertheless we allow some ioctls with non-formatted tapes, + * like rewind and reset. + */ + if (ft_no_tape || !ft_formatted) { + zft_uninit_mem(); + } + if (ft_no_tape) { + zft_offline = 1; /* so we need not test two variables */ + } + if ((access_mode == O_WRONLY || access_mode == O_RDWR) && + (ft_write_protected || ft_no_tape)) { + ftape_disable(); /* resets ft_no_tape */ + TRACE_ABORT(ft_no_tape ? -ENXIO : -EROFS, + ft_t_warn, "wrong access mode %s cartridge", + ft_no_tape ? "without a" : "with write protected"); + } + zft_write_protected = (access_mode == O_RDONLY || + ft_write_protected != 0); + if (zft_write_protected) { + TRACE(ft_t_noise, + "read only access mode: %d, " + "drive write protected: %d", + access_mode == O_RDONLY, + ft_write_protected != 0); + } + if (!zft_offline) { + TRACE_CATCH(zft_vmalloc_once(&zft_deblock_buf,FT_SEGMENT_SIZE), + ftape_disable()); + } + /* zft_seg_pos should be greater than the vtbl segpos but not + * if in compatibility mode and only after we read in the + * header segments + * + * might also be a problem if the user makes a backup with a + * *qft* device and rewinds it with a raw device. + */ + if (zft_qic_mode && + !zft_old_ftape && + zft_pos.seg_pos >= 0 && + zft_header_read && + zft_pos.seg_pos <= ft_first_data_segment) { + TRACE(ft_t_noise, "you probably mixed up the zftape devices!"); + zft_reset_position(&zft_pos); + } + TRACE_EXIT 0; +} + +/* RELEASE routine called by kernel-interface code + */ +int _zft_close(void) +{ + int result = 0; + TRACE_FUN(ft_t_flow); + + if (zft_offline) { + /* call the hardware release routine. Puts the drive offline */ + ftape_disable(); + TRACE_EXIT 0; + } + if (!(ft_write_protected || zft_old_ftape)) { + result = zft_flush_buffers(); + TRACE(ft_t_noise, "writing file mark at current position"); + if (zft_qic_mode && zft_close_volume(&zft_pos) == 0) { + zft_move_past_eof(&zft_pos); + } + if ((zft_tape_at_lbot(&zft_pos) || + !(zft_unit & FTAPE_NO_REWIND))) { + if (result >= 0) { + result = zft_update_header_segments(); + } else { + TRACE(ft_t_err, + "Error: unable to update header segments"); + } + } + } + ftape_abort_operation(); + if (!(zft_unit & FTAPE_NO_REWIND)) { + TRACE(ft_t_noise, "rewinding tape"); + if (ftape_seek_to_bot() < 0 && result >= 0) { + result = -EIO; /* keep old value */ + } + zft_reset_position(&zft_pos); + } + zft_zap_read_buffers(); + /* now free up memory as much as possible. We don't destroy + * the deblock buffer if it containes a valid segment. + */ + if (zft_deblock_segment == -1) { + zft_vfree(&zft_deblock_buf, FT_SEGMENT_SIZE); + } + /* high level driver status, forces creation of a new volume + * when calling ftape_write again and not zft_just_before_eof + */ + zft_io_state = zft_idle; + if (going_offline) { + zft_init_driver(); + zft_uninit_mem(); + going_offline = 0; + zft_offline = 1; + } else if (zft_cmpr_lock(0 /* don't load */) == 0) { + (*zft_cmpr_ops->reset)(); /* unlock it again */ + } + zft_memory_stats(); + /* call the hardware release routine. Puts the drive offline */ + ftape_disable(); + TRACE_EXIT result; +} + +/* + * the wrapper function around the wrapper MTIOCTOP ioctl + */ +static int mtioctop(struct mtop *mtop, int arg_size) +{ + int result = 0; + fun_entry *mt_fun_entry; + TRACE_FUN(ft_t_flow); + + if (arg_size != sizeof(struct mtop) || mtop->mt_op >= NR_MT_CMDS) { + TRACE_EXIT -EINVAL; + } + TRACE(ft_t_noise, "calling MTIOCTOP command: %s", + mt_funs[mtop->mt_op].name); + mt_fun_entry= &mt_funs[mtop->mt_op]; + zft_resid = mtop->mt_count; + if (!mt_fun_entry->offline && zft_offline) { + if (ft_no_tape) { + TRACE_ABORT(-ENXIO, ft_t_info, "no tape present"); + } else { + TRACE_ABORT(-ENXIO, ft_t_info, "drive is offline"); + } + } + if (!mt_fun_entry->not_formatted && !ft_formatted) { + TRACE_ABORT(-EACCES, ft_t_info, "tape is not formatted"); + } + if (!mt_fun_entry->write_protected) { + TRACE_CATCH(zft_check_write_access(&zft_pos),); + } + if (mt_fun_entry->need_idle_state && !(zft_offline || !ft_formatted)) { + TRACE_CATCH(zft_def_idle_state(),); + } + if (!zft_qic_mode && !mt_fun_entry->raw_mode) { + TRACE_ABORT(-EACCES, ft_t_info, +"Drive needs to be in QIC-80 compatibility mode for this command"); + } + result = (mt_fun_entry->function)(&mtop->mt_count); + if (zft_tape_at_lbot(&zft_pos)) { + TRACE_CATCH(zft_update_header_segments(),); + } + if (result >= 0) { + zft_resid = 0; + } + TRACE_EXIT result; +} + +/* + * standard MTIOCGET ioctl + */ +static int mtiocget(struct mtget *mtget, int arg_size) +{ + const zft_volinfo *volume; + __s64 max_tape_pos; + TRACE_FUN(ft_t_flow); + + if (arg_size != sizeof(struct mtget)) { + TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d", + arg_size); + } + mtget->mt_type = ft_drive_type.vendor_id + 0x800000; + mtget->mt_dsreg = ft_last_status.space; + mtget->mt_erreg = ft_last_error.space; /* error register */ + mtget->mt_resid = zft_resid; /* residuum of writes, reads and + * MTIOCTOP commands + */ + if (!zft_offline) { /* neither no_tape nor soft offline */ + mtget->mt_gstat = GMT_ONLINE(~0UL); + /* should rather return the status of the cartridge + * than the access mode of the file, therefor use + * ft_write_protected, not zft_write_protected + */ + if (ft_write_protected) { + mtget->mt_gstat |= GMT_WR_PROT(~0UL); + } + if(zft_header_read) { /* this catches non-formatted */ + volume = zft_find_volume(zft_pos.seg_pos); + mtget->mt_fileno = volume->count; + max_tape_pos = zft_capacity - zft_blk_sz; + if (zft_use_compression) { + max_tape_pos -= ZFT_CMPR_OVERHEAD; + } + if (zft_tape_at_eod(&zft_pos)) { + mtget->mt_gstat |= GMT_EOD(~0UL); + } + if (zft_pos.tape_pos > max_tape_pos) { + mtget->mt_gstat |= GMT_EOT(~0UL); + } + mtget->mt_blkno = zft_div_blksz(zft_pos.volume_pos, + volume->blk_sz); + if (zft_just_before_eof) { + mtget->mt_gstat |= GMT_EOF(~0UL); + } + if (zft_tape_at_lbot(&zft_pos)) { + mtget->mt_gstat |= GMT_BOT(~0UL); + } + } else { + mtget->mt_fileno = mtget->mt_blkno = -1; + if (mtget->mt_dsreg & QIC_STATUS_AT_BOT) { + mtget->mt_gstat |= GMT_BOT(~0UL); + } + } + } else { + if (ft_no_tape) { + mtget->mt_gstat = GMT_DR_OPEN(~0UL); + } else { + mtget->mt_gstat = 0UL; + } + mtget->mt_fileno = mtget->mt_blkno = -1; + } + TRACE_EXIT 0; +} + +#ifdef MTIOCRDFTSEG +/* + * Read a floppy tape segment. This is useful for manipulating the + * volume table, and read the old header segment before re-formatting + * the cartridge. + */ +static int mtiocrdftseg(struct mtftseg * mtftseg, int arg_size) +{ + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCRDFTSEG"); + if (zft_qic_mode) { + TRACE_ABORT(-EACCES, ft_t_info, + "driver needs to be in raw mode for this ioctl"); + } + if (arg_size != sizeof(struct mtftseg)) { + TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d", + arg_size); + } + if (zft_offline) { + TRACE_EXIT -ENXIO; + } + if (mtftseg->mt_mode != FT_RD_SINGLE && + mtftseg->mt_mode != FT_RD_AHEAD) { + TRACE_ABORT(-EINVAL, ft_t_info, "invalid read mode"); + } + if (!ft_formatted) { + TRACE_EXIT -EACCES; /* -ENXIO ? */ + + } + if (!zft_header_read) { + TRACE_CATCH(zft_def_idle_state(),); + } + if (mtftseg->mt_segno > ft_last_data_segment) { + TRACE_ABORT(-EINVAL, ft_t_info, "segment number is too large"); + } + mtftseg->mt_result = ftape_read_segment(mtftseg->mt_segno, + zft_deblock_buf, + mtftseg->mt_mode); + if (mtftseg->mt_result < 0) { + /* a negativ result is not an ioctl error. if + * the user wants to read damaged tapes, + * it's up to her/him + */ + TRACE_EXIT 0; + } + if (copy_to_user(mtftseg->mt_data, + zft_deblock_buf, + mtftseg->mt_result) != 0) { + TRACE_EXIT -EFAULT; + } + TRACE_EXIT 0; +} +#endif + +#ifdef MTIOCWRFTSEG +/* + * write a floppy tape segment. This version features writing of + * deleted address marks, and gracefully ignores the (software) + * ft_formatted flag to support writing of header segments after + * formatting. + */ +static int mtiocwrftseg(struct mtftseg * mtftseg, int arg_size) +{ + int result; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCWRFTSEG"); + if (zft_write_protected || zft_qic_mode) { + TRACE_EXIT -EACCES; + } + if (arg_size != sizeof(struct mtftseg)) { + TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d", + arg_size); + } + if (zft_offline) { + TRACE_EXIT -ENXIO; + } + if (mtftseg->mt_mode != FT_WR_ASYNC && + mtftseg->mt_mode != FT_WR_MULTI && + mtftseg->mt_mode != FT_WR_SINGLE && + mtftseg->mt_mode != FT_WR_DELETE) { + TRACE_ABORT(-EINVAL, ft_t_info, "invalid write mode"); + } + /* + * We don't check for ft_formatted, because this gives + * only the software status of the driver. + * + * We assume that the user knows what it is + * doing. And rely on the low level stuff to fail + * when the tape isn't formatted. We only make sure + * that The header segment buffer is allocated, + * because it holds the bad sector map. + */ + if (zft_hseg_buf == NULL) { + TRACE_EXIT -ENXIO; + } + if (mtftseg->mt_mode != FT_WR_DELETE) { + if (copy_from_user(zft_deblock_buf, + mtftseg->mt_data, + FT_SEGMENT_SIZE) != 0) { + TRACE_EXIT -EFAULT; + } + } + mtftseg->mt_result = ftape_write_segment(mtftseg->mt_segno, + zft_deblock_buf, + mtftseg->mt_mode); + if (mtftseg->mt_result >= 0 && mtftseg->mt_mode == FT_WR_SINGLE) { + /* + * a negativ result is not an ioctl error. if + * the user wants to write damaged tapes, + * it's up to her/him + */ + if ((result = ftape_loop_until_writes_done()) < 0) { + mtftseg->mt_result = result; + } + } + TRACE_EXIT 0; +} +#endif + +#ifdef MTIOCVOLINFO +/* + * get information about volume positioned at. + */ +static int mtiocvolinfo(struct mtvolinfo *volinfo, int arg_size) +{ + const zft_volinfo *volume; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCVOLINFO"); + if (arg_size != sizeof(struct mtvolinfo)) { + TRACE_ABORT(-EINVAL, + ft_t_info, "bad argument size: %d", arg_size); + } + if (zft_offline) { + TRACE_EXIT -ENXIO; + } + if (!ft_formatted) { + TRACE_EXIT -EACCES; + } + TRACE_CATCH(zft_def_idle_state(),); + volume = zft_find_volume(zft_pos.seg_pos); + volinfo->mt_volno = volume->count; + volinfo->mt_blksz = volume->blk_sz == 1 ? 0 : volume->blk_sz; + volinfo->mt_size = volume->size >> 10; + volinfo->mt_rawsize = ((zft_calc_tape_pos(volume->end_seg + 1) >> 10) - + (zft_calc_tape_pos(volume->start_seg) >> 10)); + volinfo->mt_cmpr = volume->use_compression; + TRACE_EXIT 0; +} +#endif + +#ifdef ZFT_OBSOLETE +static int mtioc_zftape_getblksz(struct mtblksz *blksz, int arg_size) +{ + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "\n" + KERN_INFO "Mag tape ioctl command: MTIOC_ZTAPE_GETBLKSZ\n" + KERN_INFO "This ioctl is here merely for compatibility.\n" + KERN_INFO "Please use MTIOCVOLINFO instead"); + if (arg_size != sizeof(struct mtblksz)) { + TRACE_ABORT(-EINVAL, + ft_t_info, "bad argument size: %d", arg_size); + } + if (zft_offline) { + TRACE_EXIT -ENXIO; + } + if (!ft_formatted) { + TRACE_EXIT -EACCES; + } + TRACE_CATCH(zft_def_idle_state(),); + blksz->mt_blksz = zft_find_volume(zft_pos.seg_pos)->blk_sz; + TRACE_EXIT 0; +} +#endif + +#ifdef MTIOCGETSIZE +/* + * get the capacity of the tape cartridge. + */ +static int mtiocgetsize(struct mttapesize *size, int arg_size) +{ + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOC_ZFTAPE_GETSIZE"); + if (arg_size != sizeof(struct mttapesize)) { + TRACE_ABORT(-EINVAL, + ft_t_info, "bad argument size: %d", arg_size); + } + if (zft_offline) { + TRACE_EXIT -ENXIO; + } + if (!ft_formatted) { + TRACE_EXIT -EACCES; + } + TRACE_CATCH(zft_def_idle_state(),); + size->mt_capacity = (unsigned int)(zft_capacity>>10); + size->mt_used = (unsigned int)(zft_get_eom_pos()>>10); + TRACE_EXIT 0; +} +#endif + +static int mtiocpos(struct mtpos *mtpos, int arg_size) +{ + int result; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCPOS"); + if (arg_size != sizeof(struct mtpos)) { + TRACE_ABORT(-EINVAL, + ft_t_info, "bad argument size: %d", arg_size); + } + result = mt_tell((int *)&mtpos->mt_blkno); + TRACE_EXIT result; +} + +#ifdef MTIOCFTFORMAT +/* + * formatting of floppy tape cartridges. This is intended to be used + * together with the MTIOCFTCMD ioctl and the new mmap feature + */ + +/* + * This function uses ftape_decode_header_segment() to inform the low + * level ftape module about the new parameters. + * + * It erases the hseg_buf. The calling process must specify all + * parameters to assure proper operation. + * + * return values: -EINVAL - wrong argument size + * -EINVAL - if ftape_decode_header_segment() failed. + */ +static int set_format_parms(struct ftfmtparms *p, __u8 *hseg_buf) +{ + ft_trace_t old_level = TRACE_LEVEL; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "MTIOCFTFORMAT operation FTFMT_SETPARMS"); + memset(hseg_buf, 0, FT_SEGMENT_SIZE); + PUT4(hseg_buf, FT_SIGNATURE, FT_HSEG_MAGIC); + + /* fill in user specified parameters + */ + hseg_buf[FT_FMT_CODE] = (__u8)p->ft_fmtcode; + PUT2(hseg_buf, FT_SPT, p->ft_spt); + hseg_buf[FT_TPC] = (__u8)p->ft_tpc; + hseg_buf[FT_FHM] = (__u8)p->ft_fhm; + hseg_buf[FT_FTM] = (__u8)p->ft_ftm; + + /* fill in sane defaults to make ftape happy. + */ + hseg_buf[FT_FSM] = (__u8)128; /* 128 is hard wired all over ftape */ + if (p->ft_fmtcode == fmt_big) { + PUT4(hseg_buf, FT_6_HSEG_1, 0); + PUT4(hseg_buf, FT_6_HSEG_2, 1); + PUT4(hseg_buf, FT_6_FRST_SEG, 2); + PUT4(hseg_buf, FT_6_LAST_SEG, p->ft_spt * p->ft_tpc - 1); + } else { + PUT2(hseg_buf, FT_HSEG_1, 0); + PUT2(hseg_buf, FT_HSEG_2, 1); + PUT2(hseg_buf, FT_FRST_SEG, 2); + PUT2(hseg_buf, FT_LAST_SEG, p->ft_spt * p->ft_tpc - 1); + } + + /* Synchronize with the low level module. This is particularly + * needed for unformatted cartridges as the QIC std was previously + * unknown BUT is needed to set data rate and to calculate timeouts. + */ + TRACE_CATCH(ftape_calibrate_data_rate(p->ft_qicstd&QIC_TAPE_STD_MASK), + _res = -EINVAL); + + /* The following will also recalcualte the timeouts for the tape + * length and QIC std we want to format to. + * abort with -EINVAL rather than -EIO + */ + SET_TRACE_LEVEL(ft_t_warn); + TRACE_CATCH(ftape_decode_header_segment(hseg_buf), + SET_TRACE_LEVEL(old_level); _res = -EINVAL); + SET_TRACE_LEVEL(old_level); + TRACE_EXIT 0; +} + +/* + * Return the internal SOFTWARE status of the kernel driver. This does + * NOT query the tape drive about its status. + */ +static int get_format_parms(struct ftfmtparms *p, __u8 *hseg_buffer) +{ + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "MTIOCFTFORMAT operation FTFMT_GETPARMS"); + p->ft_qicstd = ft_qic_std; + p->ft_fmtcode = ft_format_code; + p->ft_fhm = hseg_buffer[FT_FHM]; + p->ft_ftm = hseg_buffer[FT_FTM]; + p->ft_spt = ft_segments_per_track; + p->ft_tpc = ft_tracks_per_tape; + TRACE_EXIT 0; +} + +static int mtiocftformat(struct mtftformat *mtftformat, int arg_size) +{ + int result; + union fmt_arg *arg = &mtftformat->fmt_arg; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCFTFORMAT"); + if (zft_offline) { + if (ft_no_tape) { + TRACE_ABORT(-ENXIO, ft_t_info, "no tape present"); + } else { + TRACE_ABORT(-ENXIO, ft_t_info, "drive is offline"); + } + } + if (zft_qic_mode) { + TRACE_ABORT(-EACCES, ft_t_info, + "driver needs to be in raw mode for this ioctl"); + } + if (zft_hseg_buf == NULL) { + TRACE_CATCH(zft_vcalloc_once(&zft_hseg_buf, FT_SEGMENT_SIZE),); + } + zft_header_read = 0; + switch(mtftformat->fmt_op) { + case FTFMT_SET_PARMS: + TRACE_CATCH(set_format_parms(&arg->fmt_parms, zft_hseg_buf),); + TRACE_EXIT 0; + case FTFMT_GET_PARMS: + TRACE_CATCH(get_format_parms(&arg->fmt_parms, zft_hseg_buf),); + TRACE_EXIT 0; + case FTFMT_FORMAT_TRACK: + if ((ft_formatted && zft_check_write_access(&zft_pos) < 0) || + (!ft_formatted && zft_write_protected)) { + TRACE_ABORT(-EACCES, ft_t_info, "Write access denied"); + } + TRACE_CATCH(ftape_format_track(arg->fmt_track.ft_track, + arg->fmt_track.ft_gap3),); + TRACE_EXIT 0; + case FTFMT_STATUS: + TRACE_CATCH(ftape_format_status(&arg->fmt_status.ft_segment),); + TRACE_EXIT 0; + case FTFMT_VERIFY: + TRACE_CATCH(ftape_verify_segment(arg->fmt_verify.ft_segment, + (SectorMap *)&arg->fmt_verify.ft_bsm),); + TRACE_EXIT 0; + default: + TRACE_ABORT(-EINVAL, ft_t_err, "Invalid format operation"); + } + TRACE_EXIT result; +} +#endif + +#ifdef MTIOCFTCMD +/* + * send a QIC-117 command to the drive, with optional timeouts, + * parameter and result bits. This is intended to be used together + * with the formatting ioctl. + */ +static int mtiocftcmd(struct mtftcmd *ftcmd, int arg_size) +{ + int i; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCFTCMD"); + if (!capable(CAP_SYS_ADMIN)) { + TRACE_ABORT(-EPERM, ft_t_info, + "need CAP_SYS_ADMIN capability to send raw qic-117 commands"); + } + if (zft_qic_mode) { + TRACE_ABORT(-EACCES, ft_t_info, + "driver needs to be in raw mode for this ioctl"); + } + if (arg_size != sizeof(struct mtftcmd)) { + TRACE_ABORT(-EINVAL, + ft_t_info, "bad argument size: %d", arg_size); + } + if (ftcmd->ft_wait_before) { + TRACE_CATCH(ftape_ready_wait(ftcmd->ft_wait_before, + &ftcmd->ft_status),); + } + if (ftcmd->ft_status & QIC_STATUS_ERROR) + goto ftmtcmd_error; + if (ftcmd->ft_result_bits != 0) { + TRACE_CATCH(ftape_report_operation(&ftcmd->ft_result, + ftcmd->ft_cmd, + ftcmd->ft_result_bits),); + } else { + TRACE_CATCH(ftape_command(ftcmd->ft_cmd),); + if (ftcmd->ft_status & QIC_STATUS_ERROR) + goto ftmtcmd_error; + for (i = 0; i < ftcmd->ft_parm_cnt; i++) { + TRACE_CATCH(ftape_parameter(ftcmd->ft_parms[i]&0x0f),); + if (ftcmd->ft_status & QIC_STATUS_ERROR) + goto ftmtcmd_error; + } + } + if (ftcmd->ft_wait_after != 0) { + TRACE_CATCH(ftape_ready_wait(ftcmd->ft_wait_after, + &ftcmd->ft_status),); + } +ftmtcmd_error: + if (ftcmd->ft_status & QIC_STATUS_ERROR) { + TRACE(ft_t_noise, "error status set"); + TRACE_CATCH(ftape_report_error(&ftcmd->ft_error, + &ftcmd->ft_cmd, 1),); + } + TRACE_EXIT 0; /* this is not an i/o error */ +} +#endif + +/* IOCTL routine called by kernel-interface code + */ +int _zft_ioctl(unsigned int command, void __user * arg) +{ + int result; + union { struct mtop mtop; + struct mtget mtget; + struct mtpos mtpos; +#ifdef MTIOCRDFTSEG + struct mtftseg mtftseg; +#endif +#ifdef MTIOCVOLINFO + struct mtvolinfo mtvolinfo; +#endif +#ifdef MTIOCGETSIZE + struct mttapesize mttapesize; +#endif +#ifdef MTIOCFTFORMAT + struct mtftformat mtftformat; +#endif +#ifdef ZFT_OBSOLETE + struct mtblksz mtblksz; +#endif +#ifdef MTIOCFTCMD + struct mtftcmd mtftcmd; +#endif + } krnl_arg; + int arg_size = _IOC_SIZE(command); + int dir = _IOC_DIR(command); + TRACE_FUN(ft_t_flow); + + /* This check will only catch arguments that are too large ! + */ + if (dir & (_IOC_READ | _IOC_WRITE) && arg_size > sizeof(krnl_arg)) { + TRACE_ABORT(-EINVAL, + ft_t_info, "bad argument size: %d", arg_size); + } + if (dir & _IOC_WRITE) { + if (copy_from_user(&krnl_arg, arg, arg_size) != 0) { + TRACE_EXIT -EFAULT; + } + } + TRACE(ft_t_flow, "called with ioctl command: 0x%08x", command); + switch (command) { + case MTIOCTOP: + result = mtioctop(&krnl_arg.mtop, arg_size); + break; + case MTIOCGET: + result = mtiocget(&krnl_arg.mtget, arg_size); + break; + case MTIOCPOS: + result = mtiocpos(&krnl_arg.mtpos, arg_size); + break; +#ifdef MTIOCVOLINFO + case MTIOCVOLINFO: + result = mtiocvolinfo(&krnl_arg.mtvolinfo, arg_size); + break; +#endif +#ifdef ZFT_OBSOLETE + case MTIOC_ZFTAPE_GETBLKSZ: + result = mtioc_zftape_getblksz(&krnl_arg.mtblksz, arg_size); + break; +#endif +#ifdef MTIOCRDFTSEG + case MTIOCRDFTSEG: /* read a segment via ioctl */ + result = mtiocrdftseg(&krnl_arg.mtftseg, arg_size); + break; +#endif +#ifdef MTIOCWRFTSEG + case MTIOCWRFTSEG: /* write a segment via ioctl */ + result = mtiocwrftseg(&krnl_arg.mtftseg, arg_size); + break; +#endif +#ifdef MTIOCGETSIZE + case MTIOCGETSIZE: + result = mtiocgetsize(&krnl_arg.mttapesize, arg_size); + break; +#endif +#ifdef MTIOCFTFORMAT + case MTIOCFTFORMAT: + result = mtiocftformat(&krnl_arg.mtftformat, arg_size); + break; +#endif +#ifdef MTIOCFTCMD + case MTIOCFTCMD: + result = mtiocftcmd(&krnl_arg.mtftcmd, arg_size); + break; +#endif + default: + result = -EINVAL; + break; + } + if ((result >= 0) && (dir & _IOC_READ)) { + if (copy_to_user(arg, &krnl_arg, arg_size) != 0) { + TRACE_EXIT -EFAULT; + } + } + TRACE_EXIT result; +} |