diff options
Diffstat (limited to 'drivers/char/rocket_int.h')
| -rw-r--r-- | drivers/char/rocket_int.h | 1296 |
1 files changed, 1296 insertions, 0 deletions
diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h new file mode 100644 index 000000000000..802687290ee1 --- /dev/null +++ b/drivers/char/rocket_int.h @@ -0,0 +1,1296 @@ +/* + * rocket_int.h --- internal header file for rocket.c + * + * Written by Theodore Ts'o, Copyright 1997. + * Copyright 1997 Comtrol Corporation. + * + */ + +/* + * Definition of the types in rcktpt_type + */ +#define ROCKET_TYPE_NORMAL 0 +#define ROCKET_TYPE_MODEM 1 +#define ROCKET_TYPE_MODEMII 2 +#define ROCKET_TYPE_MODEMIII 3 +#define ROCKET_TYPE_PC104 4 + +#include <asm/io.h> +#include <asm/byteorder.h> + +typedef unsigned char Byte_t; +typedef unsigned int ByteIO_t; + +typedef unsigned int Word_t; +typedef unsigned int WordIO_t; + +typedef unsigned long DWord_t; +typedef unsigned int DWordIO_t; + +/* + * Note! Normally the Linux I/O macros already take care of + * byte-swapping the I/O instructions. However, all accesses using + * sOutDW aren't really 32-bit accesses, but should be handled in byte + * order. Hence the use of the cpu_to_le32() macro to byte-swap + * things to no-op the byte swapping done by the big-endian outl() + * instruction. + */ + +#ifdef ROCKET_DEBUG_IO +static inline void sOutB(unsigned short port, unsigned char value) +{ +#ifdef ROCKET_DEBUG_IO + printk("sOutB(%x, %x)...", port, value); +#endif + outb_p(value, port); +} + +static inline void sOutW(unsigned short port, unsigned short value) +{ +#ifdef ROCKET_DEBUG_IO + printk("sOutW(%x, %x)...", port, value); +#endif + outw_p(value, port); +} + +static inline void sOutDW(unsigned short port, unsigned long value) +{ +#ifdef ROCKET_DEBUG_IO + printk("sOutDW(%x, %lx)...", port, value); +#endif + outl_p(cpu_to_le32(value), port); +} + +static inline unsigned char sInB(unsigned short port) +{ + return inb_p(port); +} + +static inline unsigned short sInW(unsigned short port) +{ + return inw_p(port); +} + +#else /* !ROCKET_DEBUG_IO */ +#define sOutB(a, b) outb_p(b, a) +#define sOutW(a, b) outw_p(b, a) +#define sOutDW(port, value) outl_p(cpu_to_le32(value), port) +#define sInB(a) (inb_p(a)) +#define sInW(a) (inw_p(a)) +#endif /* ROCKET_DEBUG_IO */ + +/* This is used to move arrays of bytes so byte swapping isn't appropriate. */ +#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count) +#define sInStrW(port, addr, count) if (count) insw(port, addr, count) + +#define CTL_SIZE 8 +#define AIOP_CTL_SIZE 4 +#define CHAN_AIOP_SIZE 8 +#define MAX_PORTS_PER_AIOP 8 +#define MAX_AIOPS_PER_BOARD 4 +#define MAX_PORTS_PER_BOARD 32 + +/* Bus type ID */ +#define isISA 0 +#define isPCI 1 +#define isMC 2 + +/* Controller ID numbers */ +#define CTLID_NULL -1 /* no controller exists */ +#define CTLID_0001 0x0001 /* controller release 1 */ + +/* AIOP ID numbers, identifies AIOP type implementing channel */ +#define AIOPID_NULL -1 /* no AIOP or channel exists */ +#define AIOPID_0001 0x0001 /* AIOP release 1 */ + +#define NULLDEV -1 /* identifies non-existant device */ +#define NULLCTL -1 /* identifies non-existant controller */ +#define NULLCTLPTR (CONTROLLER_T *)0 /* identifies non-existant controller */ +#define NULLAIOP -1 /* identifies non-existant AIOP */ +#define NULLCHAN -1 /* identifies non-existant channel */ + +/************************************************************************ + Global Register Offsets - Direct Access - Fixed values +************************************************************************/ + +#define _CMD_REG 0x38 /* Command Register 8 Write */ +#define _INT_CHAN 0x39 /* Interrupt Channel Register 8 Read */ +#define _INT_MASK 0x3A /* Interrupt Mask Register 8 Read / Write */ +#define _UNUSED 0x3B /* Unused 8 */ +#define _INDX_ADDR 0x3C /* Index Register Address 16 Write */ +#define _INDX_DATA 0x3E /* Index Register Data 8/16 Read / Write */ + +/************************************************************************ + Channel Register Offsets for 1st channel in AIOP - Direct Access +************************************************************************/ +#define _TD0 0x00 /* Transmit Data 16 Write */ +#define _RD0 0x00 /* Receive Data 16 Read */ +#define _CHN_STAT0 0x20 /* Channel Status 8/16 Read / Write */ +#define _FIFO_CNT0 0x10 /* Transmit/Receive FIFO Count 16 Read */ +#define _INT_ID0 0x30 /* Interrupt Identification 8 Read */ + +/************************************************************************ + Tx Control Register Offsets - Indexed - External - Fixed +************************************************************************/ +#define _TX_ENBLS 0x980 /* Tx Processor Enables Register 8 Read / Write */ +#define _TXCMP1 0x988 /* Transmit Compare Value #1 8 Read / Write */ +#define _TXCMP2 0x989 /* Transmit Compare Value #2 8 Read / Write */ +#define _TXREP1B1 0x98A /* Tx Replace Value #1 - Byte 1 8 Read / Write */ +#define _TXREP1B2 0x98B /* Tx Replace Value #1 - Byte 2 8 Read / Write */ +#define _TXREP2 0x98C /* Transmit Replace Value #2 8 Read / Write */ + +/************************************************************************ +Memory Controller Register Offsets - Indexed - External - Fixed +************************************************************************/ +#define _RX_FIFO 0x000 /* Rx FIFO */ +#define _TX_FIFO 0x800 /* Tx FIFO */ +#define _RXF_OUTP 0x990 /* Rx FIFO OUT pointer 16 Read / Write */ +#define _RXF_INP 0x992 /* Rx FIFO IN pointer 16 Read / Write */ +#define _TXF_OUTP 0x994 /* Tx FIFO OUT pointer 8 Read / Write */ +#define _TXF_INP 0x995 /* Tx FIFO IN pointer 8 Read / Write */ +#define _TXP_CNT 0x996 /* Tx Priority Count 8 Read / Write */ +#define _TXP_PNTR 0x997 /* Tx Priority Pointer 8 Read / Write */ + +#define PRI_PEND 0x80 /* Priority data pending (bit7, Tx pri cnt) */ +#define TXFIFO_SIZE 255 /* size of Tx FIFO */ +#define RXFIFO_SIZE 1023 /* size of Rx FIFO */ + +/************************************************************************ +Tx Priority Buffer - Indexed - External - Fixed +************************************************************************/ +#define _TXP_BUF 0x9C0 /* Tx Priority Buffer 32 Bytes Read / Write */ +#define TXP_SIZE 0x20 /* 32 bytes */ + +/************************************************************************ +Channel Register Offsets - Indexed - Internal - Fixed +************************************************************************/ + +#define _TX_CTRL 0xFF0 /* Transmit Control 16 Write */ +#define _RX_CTRL 0xFF2 /* Receive Control 8 Write */ +#define _BAUD 0xFF4 /* Baud Rate 16 Write */ +#define _CLK_PRE 0xFF6 /* Clock Prescaler 8 Write */ + +#define STMBREAK 0x08 /* BREAK */ +#define STMFRAME 0x04 /* framing error */ +#define STMRCVROVR 0x02 /* receiver over run error */ +#define STMPARITY 0x01 /* parity error */ +#define STMERROR (STMBREAK | STMFRAME | STMPARITY) +#define STMBREAKH 0x800 /* BREAK */ +#define STMFRAMEH 0x400 /* framing error */ +#define STMRCVROVRH 0x200 /* receiver over run error */ +#define STMPARITYH 0x100 /* parity error */ +#define STMERRORH (STMBREAKH | STMFRAMEH | STMPARITYH) + +#define CTS_ACT 0x20 /* CTS input asserted */ +#define DSR_ACT 0x10 /* DSR input asserted */ +#define CD_ACT 0x08 /* CD input asserted */ +#define TXFIFOMT 0x04 /* Tx FIFO is empty */ +#define TXSHRMT 0x02 /* Tx shift register is empty */ +#define RDA 0x01 /* Rx data available */ +#define DRAINED (TXFIFOMT | TXSHRMT) /* indicates Tx is drained */ + +#define STATMODE 0x8000 /* status mode enable bit */ +#define RXFOVERFL 0x2000 /* receive FIFO overflow */ +#define RX2MATCH 0x1000 /* receive compare byte 2 match */ +#define RX1MATCH 0x0800 /* receive compare byte 1 match */ +#define RXBREAK 0x0400 /* received BREAK */ +#define RXFRAME 0x0200 /* received framing error */ +#define RXPARITY 0x0100 /* received parity error */ +#define STATERROR (RXBREAK | RXFRAME | RXPARITY) + +#define CTSFC_EN 0x80 /* CTS flow control enable bit */ +#define RTSTOG_EN 0x40 /* RTS toggle enable bit */ +#define TXINT_EN 0x10 /* transmit interrupt enable */ +#define STOP2 0x08 /* enable 2 stop bits (0 = 1 stop) */ +#define PARITY_EN 0x04 /* enable parity (0 = no parity) */ +#define EVEN_PAR 0x02 /* even parity (0 = odd parity) */ +#define DATA8BIT 0x01 /* 8 bit data (0 = 7 bit data) */ + +#define SETBREAK 0x10 /* send break condition (must clear) */ +#define LOCALLOOP 0x08 /* local loopback set for test */ +#define SET_DTR 0x04 /* assert DTR */ +#define SET_RTS 0x02 /* assert RTS */ +#define TX_ENABLE 0x01 /* enable transmitter */ + +#define RTSFC_EN 0x40 /* RTS flow control enable */ +#define RXPROC_EN 0x20 /* receive processor enable */ +#define TRIG_NO 0x00 /* Rx FIFO trigger level 0 (no trigger) */ +#define TRIG_1 0x08 /* trigger level 1 char */ +#define TRIG_1_2 0x10 /* trigger level 1/2 */ +#define TRIG_7_8 0x18 /* trigger level 7/8 */ +#define TRIG_MASK 0x18 /* trigger level mask */ +#define SRCINT_EN 0x04 /* special Rx condition interrupt enable */ +#define RXINT_EN 0x02 /* Rx interrupt enable */ +#define MCINT_EN 0x01 /* modem change interrupt enable */ + +#define RXF_TRIG 0x20 /* Rx FIFO trigger level interrupt */ +#define TXFIFO_MT 0x10 /* Tx FIFO empty interrupt */ +#define SRC_INT 0x08 /* special receive condition interrupt */ +#define DELTA_CD 0x04 /* CD change interrupt */ +#define DELTA_CTS 0x02 /* CTS change interrupt */ +#define DELTA_DSR 0x01 /* DSR change interrupt */ + +#define REP1W2_EN 0x10 /* replace byte 1 with 2 bytes enable */ +#define IGN2_EN 0x08 /* ignore byte 2 enable */ +#define IGN1_EN 0x04 /* ignore byte 1 enable */ +#define COMP2_EN 0x02 /* compare byte 2 enable */ +#define COMP1_EN 0x01 /* compare byte 1 enable */ + +#define RESET_ALL 0x80 /* reset AIOP (all channels) */ +#define TXOVERIDE 0x40 /* Transmit software off override */ +#define RESETUART 0x20 /* reset channel's UART */ +#define RESTXFCNT 0x10 /* reset channel's Tx FIFO count register */ +#define RESRXFCNT 0x08 /* reset channel's Rx FIFO count register */ + +#define INTSTAT0 0x01 /* AIOP 0 interrupt status */ +#define INTSTAT1 0x02 /* AIOP 1 interrupt status */ +#define INTSTAT2 0x04 /* AIOP 2 interrupt status */ +#define INTSTAT3 0x08 /* AIOP 3 interrupt status */ + +#define INTR_EN 0x08 /* allow interrupts to host */ +#define INT_STROB 0x04 /* strobe and clear interrupt line (EOI) */ + +/************************************************************************** + MUDBAC remapped for PCI +**************************************************************************/ + +#define _CFG_INT_PCI 0x40 +#define _PCI_INT_FUNC 0x3A + +#define PCI_STROB 0x2000 /* bit 13 of int aiop register */ +#define INTR_EN_PCI 0x0010 /* allow interrupts to host */ + +/* + * Definitions for Universal PCI board registers + */ +#define _PCI_9030_INT_CTRL 0x4c /* Offsets from BAR1 */ +#define _PCI_9030_GPIO_CTRL 0x54 +#define PCI_INT_CTRL_AIOP 0x0001 +#define PCI_GPIO_CTRL_8PORT 0x4000 +#define _PCI_9030_RING_IND 0xc0 /* Offsets from BAR1 */ + +#define CHAN3_EN 0x08 /* enable AIOP 3 */ +#define CHAN2_EN 0x04 /* enable AIOP 2 */ +#define CHAN1_EN 0x02 /* enable AIOP 1 */ +#define CHAN0_EN 0x01 /* enable AIOP 0 */ +#define FREQ_DIS 0x00 +#define FREQ_274HZ 0x60 +#define FREQ_137HZ 0x50 +#define FREQ_69HZ 0x40 +#define FREQ_34HZ 0x30 +#define FREQ_17HZ 0x20 +#define FREQ_9HZ 0x10 +#define PERIODIC_ONLY 0x80 /* only PERIODIC interrupt */ + +#define CHANINT_EN 0x0100 /* flags to enable/disable channel ints */ + +#define RDATASIZE 72 +#define RREGDATASIZE 52 + +/* + * AIOP interrupt bits for ISA/PCI boards and UPCI boards. + */ +#define AIOP_INTR_BIT_0 0x0001 +#define AIOP_INTR_BIT_1 0x0002 +#define AIOP_INTR_BIT_2 0x0004 +#define AIOP_INTR_BIT_3 0x0008 + +#define AIOP_INTR_BITS ( \ + AIOP_INTR_BIT_0 \ + | AIOP_INTR_BIT_1 \ + | AIOP_INTR_BIT_2 \ + | AIOP_INTR_BIT_3) + +#define UPCI_AIOP_INTR_BIT_0 0x0004 +#define UPCI_AIOP_INTR_BIT_1 0x0020 +#define UPCI_AIOP_INTR_BIT_2 0x0100 +#define UPCI_AIOP_INTR_BIT_3 0x0800 + +#define UPCI_AIOP_INTR_BITS ( \ + UPCI_AIOP_INTR_BIT_0 \ + | UPCI_AIOP_INTR_BIT_1 \ + | UPCI_AIOP_INTR_BIT_2 \ + | UPCI_AIOP_INTR_BIT_3) + +/* Controller level information structure */ +typedef struct { + int CtlID; + int CtlNum; + int BusType; + int boardType; + int isUPCI; + WordIO_t PCIIO; + WordIO_t PCIIO2; + ByteIO_t MBaseIO; + ByteIO_t MReg1IO; + ByteIO_t MReg2IO; + ByteIO_t MReg3IO; + Byte_t MReg2; + Byte_t MReg3; + int NumAiop; + int AltChanRingIndicator; + ByteIO_t UPCIRingInd; + WordIO_t AiopIO[AIOP_CTL_SIZE]; + ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE]; + int AiopID[AIOP_CTL_SIZE]; + int AiopNumChan[AIOP_CTL_SIZE]; + Word_t *AiopIntrBits; +} CONTROLLER_T; + +typedef CONTROLLER_T CONTROLLER_t; + +/* Channel level information structure */ +typedef struct { + CONTROLLER_T *CtlP; + int AiopNum; + int ChanID; + int ChanNum; + int rtsToggle; + + ByteIO_t Cmd; + ByteIO_t IntChan; + ByteIO_t IntMask; + DWordIO_t IndexAddr; + WordIO_t IndexData; + + WordIO_t TxRxData; + WordIO_t ChanStat; + WordIO_t TxRxCount; + ByteIO_t IntID; + + Word_t TxFIFO; + Word_t TxFIFOPtrs; + Word_t RxFIFO; + Word_t RxFIFOPtrs; + Word_t TxPrioCnt; + Word_t TxPrioPtr; + Word_t TxPrioBuf; + + Byte_t R[RREGDATASIZE]; + + Byte_t BaudDiv[4]; + Byte_t TxControl[4]; + Byte_t RxControl[4]; + Byte_t TxEnables[4]; + Byte_t TxCompare[4]; + Byte_t TxReplace1[4]; + Byte_t TxReplace2[4]; +} CHANNEL_T; + +typedef CHANNEL_T CHANNEL_t; +typedef CHANNEL_T *CHANPTR_T; + +#define InterfaceModeRS232 0x00 +#define InterfaceModeRS422 0x08 +#define InterfaceModeRS485 0x10 +#define InterfaceModeRS232T 0x18 + +/*************************************************************************** +Function: sClrBreak +Purpose: Stop sending a transmit BREAK signal +Call: sClrBreak(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrBreak(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~SETBREAK; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sClrDTR +Purpose: Clr the DTR output +Call: sClrDTR(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrDTR(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~SET_DTR; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sClrRTS +Purpose: Clr the RTS output +Call: sClrRTS(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrRTS(ChP) \ +do { \ + if ((ChP)->rtsToggle) break; \ + (ChP)->TxControl[3] &= ~SET_RTS; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sClrTxXOFF +Purpose: Clear any existing transmit software flow control off condition +Call: sClrTxXOFF(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sClrTxXOFF(ChP) \ +do { \ + sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \ + sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \ +} while (0) + +/*************************************************************************** +Function: sCtlNumToCtlPtr +Purpose: Convert a controller number to controller structure pointer +Call: sCtlNumToCtlPtr(CtlNum) + int CtlNum; Controller number +Return: CONTROLLER_T *: Ptr to controller structure +*/ +#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM] + +/*************************************************************************** +Function: sControllerEOI +Purpose: Strobe the MUDBAC's End Of Interrupt bit. +Call: sControllerEOI(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +*/ +#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB) + +/*************************************************************************** +Function: sPCIControllerEOI +Purpose: Strobe the PCI End Of Interrupt bit. + For the UPCI boards, toggle the AIOP interrupt enable bit + (this was taken from the Windows driver). +Call: sPCIControllerEOI(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +*/ +#define sPCIControllerEOI(CTLP) \ +do { \ + if ((CTLP)->isUPCI) { \ + Word_t w = sInW((CTLP)->PCIIO); \ + sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \ + sOutW((CTLP)->PCIIO, w); \ + } \ + else { \ + sOutW((CTLP)->PCIIO, PCI_STROB); \ + } \ +} while (0) + +/*************************************************************************** +Function: sDisAiop +Purpose: Disable I/O access to an AIOP +Call: sDisAiop(CltP) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; Number of AIOP on controller +*/ +#define sDisAiop(CTLP,AIOPNUM) \ +do { \ + (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \ + sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ +} while (0) + +/*************************************************************************** +Function: sDisCTSFlowCtl +Purpose: Disable output flow control using CTS +Call: sDisCTSFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisCTSFlowCtl(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~CTSFC_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sDisIXANY +Purpose: Disable IXANY Software Flow Control +Call: sDisIXANY(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisIXANY(ChP) \ +do { \ + (ChP)->R[0x0e] = 0x86; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x0c]); \ +} while (0) + +/*************************************************************************** +Function: DisParity +Purpose: Disable parity +Call: sDisParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). +*/ +#define sDisParity(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~PARITY_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sDisRTSToggle +Purpose: Disable RTS toggle +Call: sDisRTSToggle(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisRTSToggle(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~RTSTOG_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ + (ChP)->rtsToggle = 0; \ +} while (0) + +/*************************************************************************** +Function: sDisRxFIFO +Purpose: Disable Rx FIFO +Call: sDisRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisRxFIFO(ChP) \ +do { \ + (ChP)->R[0x32] = 0x0a; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x30]); \ +} while (0) + +/*************************************************************************** +Function: sDisRxStatusMode +Purpose: Disable the Rx status mode +Call: sDisRxStatusMode(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This takes the channel out of the receive status mode. All + subsequent reads of receive data using sReadRxWord() will return + two data bytes. +*/ +#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0) + +/*************************************************************************** +Function: sDisTransmit +Purpose: Disable transmit +Call: sDisTransmit(ChP) + CHANNEL_T *ChP; Ptr to channel structure + This disables movement of Tx data from the Tx FIFO into the 1 byte + Tx buffer. Therefore there could be up to a 2 byte latency + between the time sDisTransmit() is called and the transmit buffer + and transmit shift register going completely empty. +*/ +#define sDisTransmit(ChP) \ +do { \ + (ChP)->TxControl[3] &= ~TX_ENABLE; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sDisTxSoftFlowCtl +Purpose: Disable Tx Software Flow Control +Call: sDisTxSoftFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sDisTxSoftFlowCtl(ChP) \ +do { \ + (ChP)->R[0x06] = 0x8a; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sEnAiop +Purpose: Enable I/O access to an AIOP +Call: sEnAiop(CltP) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; Number of AIOP on controller +*/ +#define sEnAiop(CTLP,AIOPNUM) \ +do { \ + (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \ + sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \ +} while (0) + +/*************************************************************************** +Function: sEnCTSFlowCtl +Purpose: Enable output flow control using CTS +Call: sEnCTSFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnCTSFlowCtl(ChP) \ +do { \ + (ChP)->TxControl[2] |= CTSFC_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sEnIXANY +Purpose: Enable IXANY Software Flow Control +Call: sEnIXANY(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnIXANY(ChP) \ +do { \ + (ChP)->R[0x0e] = 0x21; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x0c]); \ +} while (0) + +/*************************************************************************** +Function: EnParity +Purpose: Enable parity +Call: sEnParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: Before enabling parity odd or even parity should be chosen using + functions sSetOddParity() or sSetEvenParity(). +*/ +#define sEnParity(ChP) \ +do { \ + (ChP)->TxControl[2] |= PARITY_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sEnRTSToggle +Purpose: Enable RTS toggle +Call: sEnRTSToggle(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function will disable RTS flow control and clear the RTS + line to allow operation of RTS toggle. +*/ +#define sEnRTSToggle(ChP) \ +do { \ + (ChP)->RxControl[2] &= ~RTSFC_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \ + (ChP)->TxControl[2] |= RTSTOG_EN; \ + (ChP)->TxControl[3] &= ~SET_RTS; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ + (ChP)->rtsToggle = 1; \ +} while (0) + +/*************************************************************************** +Function: sEnRxFIFO +Purpose: Enable Rx FIFO +Call: sEnRxFIFO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnRxFIFO(ChP) \ +do { \ + (ChP)->R[0x32] = 0x08; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x30]); \ +} while (0) + +/*************************************************************************** +Function: sEnRxProcessor +Purpose: Enable the receive processor +Call: sEnRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function is used to start the receive processor. When + the channel is in the reset state the receive processor is not + running. This is done to prevent the receive processor from + executing invalid microcode instructions prior to the + downloading of the microcode. + +Warnings: This function must be called after valid microcode has been + downloaded to the AIOP, and it must not be called before the + microcode has been downloaded. +*/ +#define sEnRxProcessor(ChP) \ +do { \ + (ChP)->RxControl[2] |= RXPROC_EN; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sEnRxStatusMode +Purpose: Enable the Rx status mode +Call: sEnRxStatusMode(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This places the channel in the receive status mode. All subsequent + reads of receive data using sReadRxWord() will return a data byte + in the low word and a status byte in the high word. + +*/ +#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE) + +/*************************************************************************** +Function: sEnTransmit +Purpose: Enable transmit +Call: sEnTransmit(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnTransmit(ChP) \ +do { \ + (ChP)->TxControl[3] |= TX_ENABLE; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sEnTxSoftFlowCtl +Purpose: Enable Tx Software Flow Control +Call: sEnTxSoftFlowCtl(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sEnTxSoftFlowCtl(ChP) \ +do { \ + (ChP)->R[0x06] = 0xc5; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sGetAiopIntStatus +Purpose: Get the AIOP interrupt status +Call: sGetAiopIntStatus(CtlP,AiopNum) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; AIOP number +Return: Byte_t: The AIOP interrupt status. Bits 0 through 7 + represent channels 0 through 7 respectively. If a + bit is set that channel is interrupting. +*/ +#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM]) + +/*************************************************************************** +Function: sGetAiopNumChan +Purpose: Get the number of channels supported by an AIOP +Call: sGetAiopNumChan(CtlP,AiopNum) + CONTROLLER_T *CtlP; Ptr to controller structure + int AiopNum; AIOP number +Return: int: The number of channels supported by the AIOP +*/ +#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM] + +/*************************************************************************** +Function: sGetChanIntID +Purpose: Get a channel's interrupt identification byte +Call: sGetChanIntID(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The channel interrupt ID. Can be any + combination of the following flags: + RXF_TRIG: Rx FIFO trigger level interrupt + TXFIFO_MT: Tx FIFO empty interrupt + SRC_INT: Special receive condition interrupt + DELTA_CD: CD change interrupt + DELTA_CTS: CTS change interrupt + DELTA_DSR: DSR change interrupt +*/ +#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR)) + +/*************************************************************************** +Function: sGetChanNum +Purpose: Get the number of a channel within an AIOP +Call: sGetChanNum(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: int: Channel number within AIOP, or NULLCHAN if channel does + not exist. +*/ +#define sGetChanNum(ChP) (ChP)->ChanNum + +/*************************************************************************** +Function: sGetChanStatus +Purpose: Get the channel status +Call: sGetChanStatus(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Word_t: The channel status. Can be any combination of + the following flags: + LOW BYTE FLAGS + CTS_ACT: CTS input asserted + DSR_ACT: DSR input asserted + CD_ACT: CD input asserted + TXFIFOMT: Tx FIFO is empty + TXSHRMT: Tx shift register is empty + RDA: Rx data available + + HIGH BYTE FLAGS + STATMODE: status mode enable bit + RXFOVERFL: receive FIFO overflow + RX2MATCH: receive compare byte 2 match + RX1MATCH: receive compare byte 1 match + RXBREAK: received BREAK + RXFRAME: received framing error + RXPARITY: received parity error +Warnings: This function will clear the high byte flags in the Channel + Status Register. +*/ +#define sGetChanStatus(ChP) sInW((ChP)->ChanStat) + +/*************************************************************************** +Function: sGetChanStatusLo +Purpose: Get the low byte only of the channel status +Call: sGetChanStatusLo(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The channel status low byte. Can be any combination + of the following flags: + CTS_ACT: CTS input asserted + DSR_ACT: DSR input asserted + CD_ACT: CD input asserted + TXFIFOMT: Tx FIFO is empty + TXSHRMT: Tx shift register is empty + RDA: Rx data available +*/ +#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat) + +/********************************************************************** + * Get RI status of channel + * Defined as a function in rocket.c -aes + */ +#if 0 +#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \ + (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \ + (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \ + (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \ + 0)) +#endif + +/*************************************************************************** +Function: sGetControllerIntStatus +Purpose: Get the controller interrupt status +Call: sGetControllerIntStatus(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +Return: Byte_t: The controller interrupt status in the lower 4 + bits. Bits 0 through 3 represent AIOP's 0 + through 3 respectively. If a bit is set that + AIOP is interrupting. Bits 4 through 7 will + always be cleared. +*/ +#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f) + +/*************************************************************************** +Function: sPCIGetControllerIntStatus +Purpose: Get the controller interrupt status +Call: sPCIGetControllerIntStatus(CtlP) + CONTROLLER_T *CtlP; Ptr to controller structure +Return: unsigned char: The controller interrupt status in the lower 4 + bits and bit 4. Bits 0 through 3 represent AIOP's 0 + through 3 respectively. Bit 4 is set if the int + was generated from periodic. If a bit is set the + AIOP is interrupting. +*/ +#define sPCIGetControllerIntStatus(CTLP) \ + ((CTLP)->isUPCI ? \ + (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \ + ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS)) + +/*************************************************************************** + +Function: sGetRxCnt +Purpose: Get the number of data bytes in the Rx FIFO +Call: sGetRxCnt(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: int: The number of data bytes in the Rx FIFO. +Comments: Byte read of count register is required to obtain Rx count. + +*/ +#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount) + +/*************************************************************************** +Function: sGetTxCnt +Purpose: Get the number of data bytes in the Tx FIFO +Call: sGetTxCnt(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: Byte_t: The number of data bytes in the Tx FIFO. +Comments: Byte read of count register is required to obtain Tx count. + +*/ +#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount) + +/***************************************************************************** +Function: sGetTxRxDataIO +Purpose: Get the I/O address of a channel's TxRx Data register +Call: sGetTxRxDataIO(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Return: WordIO_t: I/O address of a channel's TxRx Data register +*/ +#define sGetTxRxDataIO(ChP) (ChP)->TxRxData + +/*************************************************************************** +Function: sInitChanDefaults +Purpose: Initialize a channel structure to it's default state. +Call: sInitChanDefaults(ChP) + CHANNEL_T *ChP; Ptr to the channel structure +Comments: This function must be called once for every channel structure + that exists before any other SSCI calls can be made. + +*/ +#define sInitChanDefaults(ChP) \ +do { \ + (ChP)->CtlP = NULLCTLPTR; \ + (ChP)->AiopNum = NULLAIOP; \ + (ChP)->ChanID = AIOPID_NULL; \ + (ChP)->ChanNum = NULLCHAN; \ +} while (0) + +/*************************************************************************** +Function: sResetAiopByNum +Purpose: Reset the AIOP by number +Call: sResetAiopByNum(CTLP,AIOPNUM) + CONTROLLER_T CTLP; Ptr to controller structure + AIOPNUM; AIOP index +*/ +#define sResetAiopByNum(CTLP,AIOPNUM) \ +do { \ + sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \ + sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \ +} while (0) + +/*************************************************************************** +Function: sSendBreak +Purpose: Send a transmit BREAK signal +Call: sSendBreak(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSendBreak(ChP) \ +do { \ + (ChP)->TxControl[3] |= SETBREAK; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetBaud +Purpose: Set baud rate +Call: sSetBaud(ChP,Divisor) + CHANNEL_T *ChP; Ptr to channel structure + Word_t Divisor; 16 bit baud rate divisor for channel +*/ +#define sSetBaud(ChP,DIVISOR) \ +do { \ + (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \ + (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->BaudDiv[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetData7 +Purpose: Set data bits to 7 +Call: sSetData7(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetData7(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~DATA8BIT; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetData8 +Purpose: Set data bits to 8 +Call: sSetData8(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetData8(ChP) \ +do { \ + (ChP)->TxControl[2] |= DATA8BIT; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetDTR +Purpose: Set the DTR output +Call: sSetDTR(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetDTR(ChP) \ +do { \ + (ChP)->TxControl[3] |= SET_DTR; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetEvenParity +Purpose: Set even parity +Call: sSetEvenParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: This function has no effect unless parity is enabled with function + sEnParity(). +*/ +#define sSetEvenParity(ChP) \ +do { \ + (ChP)->TxControl[2] |= EVEN_PAR; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetOddParity +Purpose: Set odd parity +Call: sSetOddParity(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: Function sSetParity() can be used in place of functions sEnParity(), + sDisParity(), sSetOddParity(), and sSetEvenParity(). + +Warnings: This function has no effect unless parity is enabled with function + sEnParity(). +*/ +#define sSetOddParity(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~EVEN_PAR; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetRTS +Purpose: Set the RTS output +Call: sSetRTS(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetRTS(ChP) \ +do { \ + if ((ChP)->rtsToggle) break; \ + (ChP)->TxControl[3] |= SET_RTS; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetRxTrigger +Purpose: Set the Rx FIFO trigger level +Call: sSetRxProcessor(ChP,Level) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Level; Number of characters in Rx FIFO at which the + interrupt will be generated. Can be any of the following flags: + + TRIG_NO: no trigger + TRIG_1: 1 character in FIFO + TRIG_1_2: FIFO 1/2 full + TRIG_7_8: FIFO 7/8 full +Comments: An interrupt will be generated when the trigger level is reached + only if function sEnInterrupt() has been called with flag + RXINT_EN set. The RXF_TRIG flag in the Interrupt Idenfification + register will be set whenever the trigger level is reached + regardless of the setting of RXINT_EN. + +*/ +#define sSetRxTrigger(ChP,LEVEL) \ +do { \ + (ChP)->RxControl[2] &= ~TRIG_MASK; \ + (ChP)->RxControl[2] |= LEVEL; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetStop1 +Purpose: Set stop bits to 1 +Call: sSetStop1(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetStop1(ChP) \ +do { \ + (ChP)->TxControl[2] &= ~STOP2; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetStop2 +Purpose: Set stop bits to 2 +Call: sSetStop2(ChP) + CHANNEL_T *ChP; Ptr to channel structure +*/ +#define sSetStop2(ChP) \ +do { \ + (ChP)->TxControl[2] |= STOP2; \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \ +} while (0) + +/*************************************************************************** +Function: sSetTxXOFFChar +Purpose: Set the Tx XOFF flow control character +Call: sSetTxXOFFChar(ChP,Ch) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Ch; The value to set the Tx XOFF character to +*/ +#define sSetTxXOFFChar(ChP,CH) \ +do { \ + (ChP)->R[0x07] = (CH); \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \ +} while (0) + +/*************************************************************************** +Function: sSetTxXONChar +Purpose: Set the Tx XON flow control character +Call: sSetTxXONChar(ChP,Ch) + CHANNEL_T *ChP; Ptr to channel structure + Byte_t Ch; The value to set the Tx XON character to +*/ +#define sSetTxXONChar(ChP,CH) \ +do { \ + (ChP)->R[0x0b] = (CH); \ + sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x08]); \ +} while (0) + +/*************************************************************************** +Function: sStartRxProcessor +Purpose: Start a channel's receive processor +Call: sStartRxProcessor(ChP) + CHANNEL_T *ChP; Ptr to channel structure +Comments: This function is used to start a Rx processor after it was + stopped with sStopRxProcessor() or sStopSWInFlowCtl(). It + will restart both the Rx processor and software input flow control. + +*/ +#define sStartRxProcessor(ChP) sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0]) + +/*************************************************************************** +Function: sWriteTxByte +Purpose: Write a transmit data byte to a channel. + ByteIO_t io: Channel transmit register I/O address. This can + be obtained with sGetTxRxDataIO(). + Byte_t Data; The transmit data byte. +Warnings: This function writes the data byte without checking to see if + sMaxTxSize is exceeded in the Tx FIFO. +*/ +#define sWriteTxByte(IO,DATA) sOutB(IO,DATA) + +int sInitController(CONTROLLER_T * CtlP, + int CtlNum, + ByteIO_t MudbacIO, + ByteIO_t * AiopIOList, + int AiopIOListSize, + int IRQNum, Byte_t Frequency, int PeriodicOnly); + +int sPCIInitController(CONTROLLER_T * CtlP, + int CtlNum, + ByteIO_t * AiopIOList, + int AiopIOListSize, + WordIO_t ConfigIO, + int IRQNum, + Byte_t Frequency, + int PeriodicOnly, + int altChanRingIndicator, int UPCIRingInd); + +int sReadAiopID(ByteIO_t io); +int sReadAiopNumChan(WordIO_t io); +int sInitChan(CONTROLLER_T * CtlP, + CHANNEL_T * ChP, int AiopNum, int ChanNum); +Byte_t sGetRxErrStatus(CHANNEL_T * ChP); +void sStopRxProcessor(CHANNEL_T * ChP); +void sStopSWInFlowCtl(CHANNEL_T * ChP); +void sFlushRxFIFO(CHANNEL_T * ChP); +void sFlushTxFIFO(CHANNEL_T * ChP); +int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); +void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags); +void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); +void sModemReset(CONTROLLER_T * CtlP, int chan, int on); +void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); +void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode); + +extern Byte_t R[RDATASIZE]; +extern CONTROLLER_T sController[CTL_SIZE]; +extern Byte_t sIRQMap[16]; +extern Byte_t sBitMapClrTbl[8]; +extern Byte_t sBitMapSetTbl[8]; +extern int sClockPrescale; + +/* + * Begin Linux specific definitions for the Rocketport driver + * + * This code is Copyright Theodore Ts'o, 1995-1997 + */ + +struct r_port { + int magic; + int line; + int flags; + int count; + int blocked_open; + struct tty_struct *tty; + unsigned int board:3; + unsigned int aiop:2; + unsigned int chan:3; + CONTROLLER_t *ctlp; + CHANNEL_t channel; + int closing_wait; + int close_delay; + int intmask; + int xmit_fifo_room; /* room in xmit fifo */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + int session; + int pgrp; + int cd_status; + int ignore_status_mask; + int read_status_mask; + int cps; + +#ifdef DECLARE_WAITQUEUE + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; +#else + struct wait_queue *open_wait; + struct wait_queue *close_wait; +#endif + spinlock_t slock; + struct semaphore write_sem; +}; + +#define RPORT_MAGIC 0x525001 + +#define NUM_BOARDS 8 +#define MAX_RP_PORTS (32*NUM_BOARDS) + +/* + * The size of the xmit buffer is 1 page, or 4096 bytes + */ +#define XMIT_BUF_SIZE 4096 + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Internal flags used only by the rocketport driver */ +#define ROCKET_INITIALIZED 0x80000000 /* Port is active */ +#define ROCKET_CLOSING 0x40000000 /* Serial port is closing */ +#define ROCKET_NORMAL_ACTIVE 0x20000000 /* Normal port is active */ + +/* tty subtypes */ +#define SERIAL_TYPE_NORMAL 1 + +/* + * Assigned major numbers for the Comtrol Rocketport + */ +#define TTY_ROCKET_MAJOR 46 +#define CUA_ROCKET_MAJOR 47 + +#ifdef PCI_VENDOR_ID_RP +#undef PCI_VENDOR_ID_RP +#undef PCI_DEVICE_ID_RP8OCTA +#undef PCI_DEVICE_ID_RP8INTF +#undef PCI_DEVICE_ID_RP16INTF +#undef PCI_DEVICE_ID_RP32INTF +#undef PCI_DEVICE_ID_URP8OCTA +#undef PCI_DEVICE_ID_URP8INTF +#undef PCI_DEVICE_ID_URP16INTF +#undef PCI_DEVICE_ID_CRP16INTF +#undef PCI_DEVICE_ID_URP32INTF +#endif + +/* Comtrol PCI Vendor ID */ +#define PCI_VENDOR_ID_RP 0x11fe + +/* Comtrol Device ID's */ +#define PCI_DEVICE_ID_RP32INTF 0x0001 /* Rocketport 32 port w/external I/F */ +#define PCI_DEVICE_ID_RP8INTF 0x0002 /* Rocketport 8 port w/external I/F */ +#define PCI_DEVICE_ID_RP16INTF 0x0003 /* Rocketport 16 port w/external I/F */ +#define PCI_DEVICE_ID_RP4QUAD 0x0004 /* Rocketport 4 port w/quad cable */ +#define PCI_DEVICE_ID_RP8OCTA 0x0005 /* Rocketport 8 port w/octa cable */ +#define PCI_DEVICE_ID_RP8J 0x0006 /* Rocketport 8 port w/RJ11 connectors */ +#define PCI_DEVICE_ID_RP4J 0x0007 /* Rocketport 4 port w/RJ11 connectors */ +#define PCI_DEVICE_ID_RP8SNI 0x0008 /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */ +#define PCI_DEVICE_ID_RP16SNI 0x0009 /* Rocketport 16 port w/ DB78 SNI (Siemens) connector */ +#define PCI_DEVICE_ID_RPP4 0x000A /* Rocketport Plus 4 port */ +#define PCI_DEVICE_ID_RPP8 0x000B /* Rocketport Plus 8 port */ +#define PCI_DEVICE_ID_RP6M 0x000C /* RocketModem 6 port */ +#define PCI_DEVICE_ID_RP4M 0x000D /* RocketModem 4 port */ +#define PCI_DEVICE_ID_RP2_232 0x000E /* Rocketport Plus 2 port RS232 */ +#define PCI_DEVICE_ID_RP2_422 0x000F /* Rocketport Plus 2 port RS422 */ + +/* Universal PCI boards */ +#define PCI_DEVICE_ID_URP32INTF 0x0801 /* Rocketport UPCI 32 port w/external I/F */ +#define PCI_DEVICE_ID_URP8INTF 0x0802 /* Rocketport UPCI 8 port w/external I/F */ +#define PCI_DEVICE_ID_URP16INTF 0x0803 /* Rocketport UPCI 16 port w/external I/F */ +#define PCI_DEVICE_ID_URP8OCTA 0x0805 /* Rocketport UPCI 8 port w/octa cable */ +#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C /* Rocketmodem III 8 port */ +#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D /* Rocketmodem III 4 port */ + +/* Compact PCI device */ +#define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */ + +#define TTY_GET_LINE(t) t->index +#define TTY_DRIVER_MINOR_START(t) t->driver->minor_start +#define TTY_DRIVER_SUBTYPE(t) t->driver->subtype +#define TTY_DRIVER_NAME(t) t->driver->name +#define TTY_DRIVER_NAME_BASE(t) t->driver->name_base +#define TTY_DRIVER_FLUSH_BUFFER_EXISTS(t) t->driver->flush_buffer +#define TTY_DRIVER_FLUSH_BUFFER(t) t->driver->flush_buffer(t) + + |