diff options
Diffstat (limited to 'drivers/char/tpm/tpm_infineon.c')
| -rw-r--r-- | drivers/char/tpm/tpm_infineon.c | 533 |
1 files changed, 533 insertions, 0 deletions
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c new file mode 100644 index 000000000000..dc8c540391fd --- /dev/null +++ b/drivers/char/tpm/tpm_infineon.c @@ -0,0 +1,533 @@ +/* + * Description: + * Device Driver for the Infineon Technologies + * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module + * Specifications at www.trustedcomputinggroup.org + * + * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de> + * Applied Data Security Group, Ruhr-University Bochum, Germany + * Project-Homepage: http://www.prosec.rub.de/tpm + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + */ + +#include <acpi/acpi_bus.h> +#include <linux/pnp.h> +#include "tpm.h" + +/* Infineon specific definitions */ +/* maximum number of WTX-packages */ +#define TPM_MAX_WTX_PACKAGES 50 +/* msleep-Time for WTX-packages */ +#define TPM_WTX_MSLEEP_TIME 20 +/* msleep-Time --> Interval to check status register */ +#define TPM_MSLEEP_TIME 3 +/* gives number of max. msleep()-calls before throwing timeout */ +#define TPM_MAX_TRIES 5000 +#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1 + +/* These values will be filled after ACPI-call */ +static int TPM_INF_DATA = 0; +static int TPM_INF_ADDR = 0; + +/* TPM header definitions */ +enum infineon_tpm_header { + TPM_VL_VER = 0x01, + TPM_VL_CHANNEL_CONTROL = 0x07, + TPM_VL_CHANNEL_PERSONALISATION = 0x0A, + TPM_VL_CHANNEL_TPM = 0x0B, + TPM_VL_CONTROL = 0x00, + TPM_INF_NAK = 0x15, + TPM_CTRL_WTX = 0x10, + TPM_CTRL_WTX_ABORT = 0x18, + TPM_CTRL_WTX_ABORT_ACK = 0x18, + TPM_CTRL_ERROR = 0x20, + TPM_CTRL_CHAININGACK = 0x40, + TPM_CTRL_CHAINING = 0x80, + TPM_CTRL_DATA = 0x04, + TPM_CTRL_DATA_CHA = 0x84, + TPM_CTRL_DATA_CHA_ACK = 0xC4 +}; + +enum infineon_tpm_register { + WRFIFO = 0x00, + RDFIFO = 0x01, + STAT = 0x02, + CMD = 0x03 +}; + +enum infineon_tpm_command_bits { + CMD_DIS = 0x00, + CMD_LP = 0x01, + CMD_RES = 0x02, + CMD_IRQC = 0x06 +}; + +enum infineon_tpm_status_bits { + STAT_XFE = 0x00, + STAT_LPA = 0x01, + STAT_FOK = 0x02, + STAT_TOK = 0x03, + STAT_IRQA = 0x06, + STAT_RDA = 0x07 +}; + +/* some outgoing values */ +enum infineon_tpm_values { + CHIP_ID1 = 0x20, + CHIP_ID2 = 0x21, + TPM_DAR = 0x30, + RESET_LP_IRQC_DISABLE = 0x41, + ENABLE_REGISTER_PAIR = 0x55, + IOLIMH = 0x60, + IOLIML = 0x61, + DISABLE_REGISTER_PAIR = 0xAA, + IDVENL = 0xF1, + IDVENH = 0xF2, + IDPDL = 0xF3, + IDPDH = 0xF4 +}; + +static int number_of_wtx; + +static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) +{ + int status; + int check = 0; + int i; + + if (clear_wrfifo) { + for (i = 0; i < 4096; i++) { + status = inb(chip->vendor->base + WRFIFO); + if (status == 0xff) { + if (check == 5) + break; + else + check++; + } + } + } + /* Note: The values which are currently in the FIFO of the TPM + are thrown away since there is no usage for them. Usually, + this has nothing to say, since the TPM will give its answer + immediately or will be aborted anyway, so the data here is + usually garbage and useless. + We have to clean this, because the next communication with + the TPM would be rubbish, if there is still some old data + in the Read FIFO. + */ + i = 0; + do { + status = inb(chip->vendor->base + RDFIFO); + status = inb(chip->vendor->base + STAT); + i++; + if (i == TPM_MAX_TRIES) + return -EIO; + } while ((status & (1 << STAT_RDA)) != 0); + return 0; +} + +static int wait(struct tpm_chip *chip, int wait_for_bit) +{ + int status; + int i; + for (i = 0; i < TPM_MAX_TRIES; i++) { + status = inb(chip->vendor->base + STAT); + /* check the status-register if wait_for_bit is set */ + if (status & 1 << wait_for_bit) + break; + msleep(TPM_MSLEEP_TIME); + } + if (i == TPM_MAX_TRIES) { /* timeout occurs */ + if (wait_for_bit == STAT_XFE) + dev_err(&chip->pci_dev->dev, + "Timeout in wait(STAT_XFE)\n"); + if (wait_for_bit == STAT_RDA) + dev_err(&chip->pci_dev->dev, + "Timeout in wait(STAT_RDA)\n"); + return -EIO; + } + return 0; +}; + +static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) +{ + wait(chip, STAT_XFE); + outb(sendbyte, chip->vendor->base + WRFIFO); +} + + /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more + calculation time, it sends a WTX-package, which has to be acknowledged + or aborted. This usually occurs if you are hammering the TPM with key + creation. Set the maximum number of WTX-packages in the definitions + above, if the number is reached, the waiting-time will be denied + and the TPM command has to be resend. + */ + +static void tpm_wtx(struct tpm_chip *chip) +{ + number_of_wtx++; + dev_info(&chip->pci_dev->dev, "Granting WTX (%02d / %02d)\n", + number_of_wtx, TPM_MAX_WTX_PACKAGES); + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_CTRL_WTX); + wait_and_send(chip, 0x00); + wait_and_send(chip, 0x00); + msleep(TPM_WTX_MSLEEP_TIME); +} + +static void tpm_wtx_abort(struct tpm_chip *chip) +{ + dev_info(&chip->pci_dev->dev, "Aborting WTX\n"); + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_CTRL_WTX_ABORT); + wait_and_send(chip, 0x00); + wait_and_send(chip, 0x00); + number_of_wtx = 0; + msleep(TPM_WTX_MSLEEP_TIME); +} + +static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count) +{ + int i; + int ret; + u32 size = 0; + +recv_begin: + /* start receiving header */ + for (i = 0; i < 4; i++) { + ret = wait(chip, STAT_RDA); + if (ret) + return -EIO; + buf[i] = inb(chip->vendor->base + RDFIFO); + } + + if (buf[0] != TPM_VL_VER) { + dev_err(&chip->pci_dev->dev, + "Wrong transport protocol implementation!\n"); + return -EIO; + } + + if (buf[1] == TPM_CTRL_DATA) { + /* size of the data received */ + size = ((buf[2] << 8) | buf[3]); + + for (i = 0; i < size; i++) { + wait(chip, STAT_RDA); + buf[i] = inb(chip->vendor->base + RDFIFO); + } + + if ((size == 0x6D00) && (buf[1] == 0x80)) { + dev_err(&chip->pci_dev->dev, + "Error handling on vendor layer!\n"); + return -EIO; + } + + for (i = 0; i < size; i++) + buf[i] = buf[i + 6]; + + size = size - 6; + return size; + } + + if (buf[1] == TPM_CTRL_WTX) { + dev_info(&chip->pci_dev->dev, "WTX-package received\n"); + if (number_of_wtx < TPM_MAX_WTX_PACKAGES) { + tpm_wtx(chip); + goto recv_begin; + } else { + tpm_wtx_abort(chip); + goto recv_begin; + } + } + + if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) { + dev_info(&chip->pci_dev->dev, "WTX-abort acknowledged\n"); + return size; + } + + if (buf[1] == TPM_CTRL_ERROR) { + dev_err(&chip->pci_dev->dev, "ERROR-package received:\n"); + if (buf[4] == TPM_INF_NAK) + dev_err(&chip->pci_dev->dev, + "-> Negative acknowledgement" + " - retransmit command!\n"); + return -EIO; + } + return -EIO; +} + +static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) +{ + int i; + int ret; + u8 count_high, count_low, count_4, count_3, count_2, count_1; + + /* Disabling Reset, LP and IRQC */ + outb(RESET_LP_IRQC_DISABLE, chip->vendor->base + CMD); + + ret = empty_fifo(chip, 1); + if (ret) { + dev_err(&chip->pci_dev->dev, "Timeout while clearing FIFO\n"); + return -EIO; + } + + ret = wait(chip, STAT_XFE); + if (ret) + return -EIO; + + count_4 = (count & 0xff000000) >> 24; + count_3 = (count & 0x00ff0000) >> 16; + count_2 = (count & 0x0000ff00) >> 8; + count_1 = (count & 0x000000ff); + count_high = ((count + 6) & 0xffffff00) >> 8; + count_low = ((count + 6) & 0x000000ff); + + /* Sending Header */ + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_CTRL_DATA); + wait_and_send(chip, count_high); + wait_and_send(chip, count_low); + + /* Sending Data Header */ + wait_and_send(chip, TPM_VL_VER); + wait_and_send(chip, TPM_VL_CHANNEL_TPM); + wait_and_send(chip, count_4); + wait_and_send(chip, count_3); + wait_and_send(chip, count_2); + wait_and_send(chip, count_1); + + /* Sending Data */ + for (i = 0; i < count; i++) { + wait_and_send(chip, buf[i]); + } + return count; +} + +static void tpm_inf_cancel(struct tpm_chip *chip) +{ + /* + Since we are using the legacy mode to communicate + with the TPM, we have no cancel functions, but have + a workaround for interrupting the TPM through WTX. + */ +} + +static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); +static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); +static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL); +static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel); + +static struct attribute *inf_attrs[] = { + &dev_attr_pubek.attr, + &dev_attr_pcrs.attr, + &dev_attr_caps.attr, + &dev_attr_cancel.attr, + NULL, +}; + +static struct attribute_group inf_attr_grp = {.attrs = inf_attrs }; + +static struct file_operations inf_ops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = tpm_open, + .read = tpm_read, + .write = tpm_write, + .release = tpm_release, +}; + +static struct tpm_vendor_specific tpm_inf = { + .recv = tpm_inf_recv, + .send = tpm_inf_send, + .cancel = tpm_inf_cancel, + .req_complete_mask = 0, + .req_complete_val = 0, + .attr_group = &inf_attr_grp, + .miscdev = {.fops = &inf_ops,}, +}; + +static const struct pnp_device_id tpm_pnp_tbl[] = { + /* Infineon TPMs */ + {"IFX0101", 0}, + {"IFX0102", 0}, + {"", 0} +}; + +static int __devinit tpm_inf_acpi_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff); + TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff); + tpm_inf.base = pnp_port_start(dev, 1); + dev_info(&dev->dev, "Found %s with ID %s\n", + dev->name, dev_id->id); + if (!((tpm_inf.base >> 8) & 0xff)) + tpm_inf.base = 0; + return 0; +} + +static struct pnp_driver tpm_inf_pnp = { + .name = "tpm_inf_pnp", + .id_table = tpm_pnp_tbl, + .probe = tpm_inf_acpi_probe, +}; + +static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + int rc = 0; + u8 iol, ioh; + int vendorid[2]; + int version[2]; + int productid[2]; + char chipname[20]; + + if (pci_enable_device(pci_dev)) + return -EIO; + + dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device); + + /* read IO-ports from ACPI */ + pnp_register_driver(&tpm_inf_pnp); + pnp_unregister_driver(&tpm_inf_pnp); + + /* Make sure, we have received valid config ports */ + if (!TPM_INF_ADDR) { + pci_disable_device(pci_dev); + return -EIO; + } + + /* query chip for its vendor, its version number a.s.o. */ + outb(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); + outb(IDVENL, TPM_INF_ADDR); + vendorid[1] = inb(TPM_INF_DATA); + outb(IDVENH, TPM_INF_ADDR); + vendorid[0] = inb(TPM_INF_DATA); + outb(IDPDL, TPM_INF_ADDR); + productid[1] = inb(TPM_INF_DATA); + outb(IDPDH, TPM_INF_ADDR); + productid[0] = inb(TPM_INF_DATA); + outb(CHIP_ID1, TPM_INF_ADDR); + version[1] = inb(TPM_INF_DATA); + outb(CHIP_ID2, TPM_INF_ADDR); + version[0] = inb(TPM_INF_DATA); + + switch ((productid[0] << 8) | productid[1]) { + case 6: + sprintf(chipname, " (SLD 9630 TT 1.1)"); + break; + case 11: + sprintf(chipname, " (SLB 9635 TT 1.2)"); + break; + default: + sprintf(chipname, " (unknown chip)"); + break; + } + chipname[19] = 0; + + if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) { + + if (tpm_inf.base == 0) { + dev_err(&pci_dev->dev, "No IO-ports found!\n"); + pci_disable_device(pci_dev); + return -EIO; + } + /* configure TPM with IO-ports */ + outb(IOLIMH, TPM_INF_ADDR); + outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA); + outb(IOLIML, TPM_INF_ADDR); + outb((tpm_inf.base & 0xff), TPM_INF_DATA); + + /* control if IO-ports are set correctly */ + outb(IOLIMH, TPM_INF_ADDR); + ioh = inb(TPM_INF_DATA); + outb(IOLIML, TPM_INF_ADDR); + iol = inb(TPM_INF_DATA); + + if ((ioh << 8 | iol) != tpm_inf.base) { + dev_err(&pci_dev->dev, + "Could not set IO-ports to %04x\n", + tpm_inf.base); + pci_disable_device(pci_dev); + return -EIO; + } + + /* activate register */ + outb(TPM_DAR, TPM_INF_ADDR); + outb(0x01, TPM_INF_DATA); + outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); + + /* disable RESET, LP and IRQC */ + outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD); + + /* Finally, we're done, print some infos */ + dev_info(&pci_dev->dev, "TPM found: " + "config base 0x%x, " + "io base 0x%x, " + "chip version %02x%02x, " + "vendor id %x%x (Infineon), " + "product id %02x%02x" + "%s\n", + TPM_INF_ADDR, + tpm_inf.base, + version[0], version[1], + vendorid[0], vendorid[1], + productid[0], productid[1], chipname); + + rc = tpm_register_hardware(pci_dev, &tpm_inf); + if (rc < 0) { + pci_disable_device(pci_dev); + return -ENODEV; + } + return 0; + } else { + dev_info(&pci_dev->dev, "No Infineon TPM found!\n"); + pci_disable_device(pci_dev); + return -ENODEV; + } +} + +static struct pci_device_id tpm_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2)}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, tpm_pci_tbl); + +static struct pci_driver inf_pci_driver = { + .name = "tpm_inf", + .id_table = tpm_pci_tbl, + .probe = tpm_inf_probe, + .remove = __devexit_p(tpm_remove), + .suspend = tpm_pm_suspend, + .resume = tpm_pm_resume, +}; + +static int __init init_inf(void) +{ + return pci_register_driver(&inf_pci_driver); +} + +static void __exit cleanup_inf(void) +{ + pci_unregister_driver(&inf_pci_driver); +} + +module_init(init_inf); +module_exit(cleanup_inf); + +MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); +MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); +MODULE_VERSION("1.5"); +MODULE_LICENSE("GPL"); |