diff options
Diffstat (limited to 'drivers/clk/clk-si5351.c')
| -rw-r--r-- | drivers/clk/clk-si5351.c | 74 |
1 files changed, 71 insertions, 3 deletions
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 892728412e9d..efc6d5e9268b 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -851,6 +851,41 @@ static int _si5351_clkout_set_drive_strength( return 0; } +static int _si5351_clkout_set_disable_state( + struct si5351_driver_data *drvdata, int num, + enum si5351_disable_state state) +{ + u8 reg = (num < 4) ? SI5351_CLK3_0_DISABLE_STATE : + SI5351_CLK7_4_DISABLE_STATE; + u8 shift = (num < 4) ? (2 * num) : (2 * (num-4)); + u8 mask = SI5351_CLK_DISABLE_STATE_MASK << shift; + u8 val; + + if (num > 8) + return -EINVAL; + + switch (state) { + case SI5351_DISABLE_LOW: + val = SI5351_CLK_DISABLE_STATE_LOW; + break; + case SI5351_DISABLE_HIGH: + val = SI5351_CLK_DISABLE_STATE_HIGH; + break; + case SI5351_DISABLE_FLOATING: + val = SI5351_CLK_DISABLE_STATE_FLOAT; + break; + case SI5351_DISABLE_NEVER: + val = SI5351_CLK_DISABLE_STATE_NEVER; + break; + default: + return 0; + } + + si5351_set_bits(drvdata, reg, mask, val << shift); + + return 0; +} + static int si5351_clkout_prepare(struct clk_hw *hw) { struct si5351_hw_data *hwdata = @@ -1225,6 +1260,33 @@ static int si5351_dt_parse(struct i2c_client *client) } } + if (!of_property_read_u32(child, "silabs,disable-state", + &val)) { + switch (val) { + case 0: + pdata->clkout[num].disable_state = + SI5351_DISABLE_LOW; + break; + case 1: + pdata->clkout[num].disable_state = + SI5351_DISABLE_HIGH; + break; + case 2: + pdata->clkout[num].disable_state = + SI5351_DISABLE_FLOATING; + break; + case 3: + pdata->clkout[num].disable_state = + SI5351_DISABLE_NEVER; + break; + default: + dev_err(&client->dev, + "invalid disable state %d for clkout %d\n", + val, num); + return -EINVAL; + } + } + if (!of_property_read_u32(child, "clock-frequency", &val)) pdata->clkout[num].rate = val; @@ -1281,9 +1343,6 @@ static int si5351_i2c_probe(struct i2c_client *client, /* Disable interrupts */ si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0); - /* Set disabled output drivers to drive low */ - si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00); - si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00); /* Ensure pll select is on XTAL for Si5351A/B */ if (drvdata->variant != SI5351_VARIANT_C) si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, @@ -1327,6 +1386,15 @@ static int si5351_i2c_probe(struct i2c_client *client, n, pdata->clkout[n].drive); return ret; } + + ret = _si5351_clkout_set_disable_state(drvdata, n, + pdata->clkout[n].disable_state); + if (ret) { + dev_err(&client->dev, + "failed set disable state of clkout%d to %d\n", + n, pdata->clkout[n].disable_state); + return ret; + } } /* register xtal input clock gate */ |