diff options
Diffstat (limited to 'drivers/clk/meson')
| -rw-r--r-- | drivers/clk/meson/Kconfig | 26 | ||||
| -rw-r--r-- | drivers/clk/meson/axg-audio.c | 214 | ||||
| -rw-r--r-- | drivers/clk/meson/clk-phase.c | 56 | ||||
| -rw-r--r-- | drivers/clk/meson/clk-phase.h | 6 | ||||
| -rw-r--r-- | drivers/clk/meson/g12a.c | 11 | ||||
| -rw-r--r-- | drivers/clk/meson/meson-aoclk.c | 2 |
6 files changed, 275 insertions, 40 deletions
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index dabeb435d067..034da203e8e0 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -1,4 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only +menu "Clock support for Amlogic platforms" + depends on ARCH_MESON || COMPILE_TEST + config COMMON_CLK_MESON_REGMAP tristate select REGMAP @@ -41,8 +44,9 @@ config COMMON_CLK_MESON_CPU_DYNDIV select COMMON_CLK_MESON_REGMAP config COMMON_CLK_MESON8B - bool - depends on ARCH_MESON + bool "Meson8 SoC Clock controller support" + depends on ARM + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_MPLL select COMMON_CLK_MESON_PLL @@ -54,8 +58,9 @@ config COMMON_CLK_MESON8B want peripherals and CPU frequency scaling to work. config COMMON_CLK_GXBB - bool - depends on ARCH_MESON + bool "GXBB and GXL SoC clock controllers support" + depends on ARM64 + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_DUALDIV select COMMON_CLK_MESON_VID_PLL_DIV @@ -69,8 +74,9 @@ config COMMON_CLK_GXBB Say Y if you want peripherals and CPU frequency scaling to work. config COMMON_CLK_AXG - bool - depends on ARCH_MESON + bool "AXG SoC clock controllers support" + depends on ARM64 + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_DUALDIV select COMMON_CLK_MESON_MPLL @@ -84,7 +90,7 @@ config COMMON_CLK_AXG config COMMON_CLK_AXG_AUDIO tristate "Meson AXG Audio Clock Controller Driver" - depends on ARCH_MESON + depends on ARM64 select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_PHASE select COMMON_CLK_MESON_SCLK_DIV @@ -94,8 +100,9 @@ config COMMON_CLK_AXG_AUDIO aka axg, Say Y if you want audio subsystem to work. config COMMON_CLK_G12A - bool - depends on ARCH_MESON + bool "G12 and SM1 SoC clock controllers support" + depends on ARM64 + default y select COMMON_CLK_MESON_REGMAP select COMMON_CLK_MESON_DUALDIV select COMMON_CLK_MESON_MPLL @@ -107,3 +114,4 @@ config COMMON_CLK_G12A help Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2 devices, aka g12a. Say Y if you want peripherals to work. +endmenu diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c index 53715e36326c..7c8d02164443 100644 --- a/drivers/clk/meson/axg-audio.c +++ b/drivers/clk/meson/axg-audio.c @@ -147,6 +147,29 @@ }, \ } +#define AUD_SCLK_WS(_name, _reg, _width, _shift_ph, _shift_ws, _pname, \ + _iflags) { \ + .data = &(struct meson_sclk_ws_inv_data) { \ + .ph = { \ + .reg_off = (_reg), \ + .shift = (_shift_ph), \ + .width = (_width), \ + }, \ + .ws = { \ + .reg_off = (_reg), \ + .shift = (_shift_ws), \ + .width = (_width), \ + }, \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = "aud_"#_name, \ + .ops = &meson_clk_phase_ops, \ + .parent_names = (const char *[]){ #_pname }, \ + .num_parents = 1, \ + .flags = (_iflags), \ + }, \ +} + /* Audio Master Clocks */ static const struct clk_parent_data mst_mux_parent_data[] = { { .fw_name = "mst_in0", }, @@ -254,6 +277,10 @@ static const struct clk_parent_data tdm_lrclk_parent_data[] = { AUD_PHASE(tdm##_name##_sclk, _reg, 1, 29, \ aud_tdm##_name##_sclk_post_en, \ CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT) +#define AUD_TDM_SCLK_WS(_name, _reg) \ + AUD_SCLK_WS(tdm##_name##_sclk, _reg, 1, 29, 28, \ + aud_tdm##_name##_sclk_post_en, \ + CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT) #define AUD_TDM_LRLCK(_name, _reg) \ AUD_MUX(tdm##_name##_lrclk, _reg, 0xf, 20, \ @@ -499,12 +526,6 @@ static struct clk_regmap tdmin_c_sclk = AUD_TDM_SCLK(in_c, AUDIO_CLK_TDMIN_C_CTRL); static struct clk_regmap tdmin_lb_sclk = AUD_TDM_SCLK(in_lb, AUDIO_CLK_TDMIN_LB_CTRL); -static struct clk_regmap tdmout_a_sclk = - AUD_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL); -static struct clk_regmap tdmout_b_sclk = - AUD_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL); -static struct clk_regmap tdmout_c_sclk = - AUD_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); static struct clk_regmap tdmin_a_lrclk = AUD_TDM_LRLCK(in_a, AUDIO_CLK_TDMIN_A_CTRL); @@ -521,6 +542,14 @@ static struct clk_regmap tdmout_b_lrclk = static struct clk_regmap tdmout_c_lrclk = AUD_TDM_LRLCK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); +/* AXG Clocks */ +static struct clk_regmap axg_tdmout_a_sclk = + AUD_TDM_SCLK(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static struct clk_regmap axg_tdmout_b_sclk = + AUD_TDM_SCLK(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static struct clk_regmap axg_tdmout_c_sclk = + AUD_TDM_SCLK(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + /* AXG/G12A Clocks */ static struct clk_hw axg_aud_top = { .init = &(struct clk_init_data) { @@ -591,7 +620,13 @@ static struct clk_regmap g12a_tdm_sclk_pad_1 = AUD_TDM_PAD_CTRL( static struct clk_regmap g12a_tdm_sclk_pad_2 = AUD_TDM_PAD_CTRL( sclk_pad_2, AUDIO_MST_PAD_CTRL1, 8, sclk_pad_ctrl_parent_data); -/* G12a/SM1 clocks */ +static struct clk_regmap g12a_tdmout_a_sclk = + AUD_TDM_SCLK_WS(out_a, AUDIO_CLK_TDMOUT_A_CTRL); +static struct clk_regmap g12a_tdmout_b_sclk = + AUD_TDM_SCLK_WS(out_b, AUDIO_CLK_TDMOUT_B_CTRL); +static struct clk_regmap g12a_tdmout_c_sclk = + AUD_TDM_SCLK_WS(out_c, AUDIO_CLK_TDMOUT_C_CTRL); + static struct clk_regmap toram = AUD_PCLK_GATE(toram, AUDIO_CLK_GATE_EN, 20); static struct clk_regmap spdifout_b = @@ -889,9 +924,9 @@ static struct clk_hw_onecell_data axg_audio_hw_onecell_data = { [AUD_CLKID_TDMIN_B_SCLK] = &tdmin_b_sclk.hw, [AUD_CLKID_TDMIN_C_SCLK] = &tdmin_c_sclk.hw, [AUD_CLKID_TDMIN_LB_SCLK] = &tdmin_lb_sclk.hw, - [AUD_CLKID_TDMOUT_A_SCLK] = &tdmout_a_sclk.hw, - [AUD_CLKID_TDMOUT_B_SCLK] = &tdmout_b_sclk.hw, - [AUD_CLKID_TDMOUT_C_SCLK] = &tdmout_c_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &axg_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &axg_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &axg_tdmout_c_sclk.hw, [AUD_CLKID_TDMIN_A_LRCLK] = &tdmin_a_lrclk.hw, [AUD_CLKID_TDMIN_B_LRCLK] = &tdmin_b_lrclk.hw, [AUD_CLKID_TDMIN_C_LRCLK] = &tdmin_c_lrclk.hw, @@ -1026,9 +1061,9 @@ static struct clk_hw_onecell_data g12a_audio_hw_onecell_data = { [AUD_CLKID_TDMIN_B_SCLK] = &tdmin_b_sclk.hw, [AUD_CLKID_TDMIN_C_SCLK] = &tdmin_c_sclk.hw, [AUD_CLKID_TDMIN_LB_SCLK] = &tdmin_lb_sclk.hw, - [AUD_CLKID_TDMOUT_A_SCLK] = &tdmout_a_sclk.hw, - [AUD_CLKID_TDMOUT_B_SCLK] = &tdmout_b_sclk.hw, - [AUD_CLKID_TDMOUT_C_SCLK] = &tdmout_c_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &g12a_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &g12a_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &g12a_tdmout_c_sclk.hw, [AUD_CLKID_TDMIN_A_LRCLK] = &tdmin_a_lrclk.hw, [AUD_CLKID_TDMIN_B_LRCLK] = &tdmin_b_lrclk.hw, [AUD_CLKID_TDMIN_C_LRCLK] = &tdmin_c_lrclk.hw, @@ -1170,9 +1205,9 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = { [AUD_CLKID_TDMIN_B_SCLK] = &tdmin_b_sclk.hw, [AUD_CLKID_TDMIN_C_SCLK] = &tdmin_c_sclk.hw, [AUD_CLKID_TDMIN_LB_SCLK] = &tdmin_lb_sclk.hw, - [AUD_CLKID_TDMOUT_A_SCLK] = &tdmout_a_sclk.hw, - [AUD_CLKID_TDMOUT_B_SCLK] = &tdmout_b_sclk.hw, - [AUD_CLKID_TDMOUT_C_SCLK] = &tdmout_c_sclk.hw, + [AUD_CLKID_TDMOUT_A_SCLK] = &g12a_tdmout_a_sclk.hw, + [AUD_CLKID_TDMOUT_B_SCLK] = &g12a_tdmout_b_sclk.hw, + [AUD_CLKID_TDMOUT_C_SCLK] = &g12a_tdmout_c_sclk.hw, [AUD_CLKID_TDMIN_A_LRCLK] = &tdmin_a_lrclk.hw, [AUD_CLKID_TDMIN_B_LRCLK] = &tdmin_b_lrclk.hw, [AUD_CLKID_TDMIN_C_LRCLK] = &tdmin_c_lrclk.hw, @@ -1209,12 +1244,7 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = { }; -/* Convenience table to populate regmap in .probe() - * Note that this table is shared between both AXG and G12A, - * with spdifout_b clocks being exclusive to G12A. Since those - * clocks are not declared within the AXG onecell table, we do not - * feel the need to have separate AXG/G12A regmap tables. - */ +/* Convenience table to populate regmap in .probe(). */ static struct clk_regmap *const axg_clk_regmaps[] = { &ddr_arb, &pdm, @@ -1236,6 +1266,130 @@ static struct clk_regmap *const axg_clk_regmaps[] = { &spdifout, &resample, &power_detect, + &mst_a_mclk_sel, + &mst_b_mclk_sel, + &mst_c_mclk_sel, + &mst_d_mclk_sel, + &mst_e_mclk_sel, + &mst_f_mclk_sel, + &mst_a_mclk_div, + &mst_b_mclk_div, + &mst_c_mclk_div, + &mst_d_mclk_div, + &mst_e_mclk_div, + &mst_f_mclk_div, + &mst_a_mclk, + &mst_b_mclk, + &mst_c_mclk, + &mst_d_mclk, + &mst_e_mclk, + &mst_f_mclk, + &spdifout_clk_sel, + &spdifout_clk_div, + &spdifout_clk, + &spdifin_clk_sel, + &spdifin_clk_div, + &spdifin_clk, + &pdm_dclk_sel, + &pdm_dclk_div, + &pdm_dclk, + &pdm_sysclk_sel, + &pdm_sysclk_div, + &pdm_sysclk, + &mst_a_sclk_pre_en, + &mst_b_sclk_pre_en, + &mst_c_sclk_pre_en, + &mst_d_sclk_pre_en, + &mst_e_sclk_pre_en, + &mst_f_sclk_pre_en, + &mst_a_sclk_div, + &mst_b_sclk_div, + &mst_c_sclk_div, + &mst_d_sclk_div, + &mst_e_sclk_div, + &mst_f_sclk_div, + &mst_a_sclk_post_en, + &mst_b_sclk_post_en, + &mst_c_sclk_post_en, + &mst_d_sclk_post_en, + &mst_e_sclk_post_en, + &mst_f_sclk_post_en, + &mst_a_sclk, + &mst_b_sclk, + &mst_c_sclk, + &mst_d_sclk, + &mst_e_sclk, + &mst_f_sclk, + &mst_a_lrclk_div, + &mst_b_lrclk_div, + &mst_c_lrclk_div, + &mst_d_lrclk_div, + &mst_e_lrclk_div, + &mst_f_lrclk_div, + &mst_a_lrclk, + &mst_b_lrclk, + &mst_c_lrclk, + &mst_d_lrclk, + &mst_e_lrclk, + &mst_f_lrclk, + &tdmin_a_sclk_sel, + &tdmin_b_sclk_sel, + &tdmin_c_sclk_sel, + &tdmin_lb_sclk_sel, + &tdmout_a_sclk_sel, + &tdmout_b_sclk_sel, + &tdmout_c_sclk_sel, + &tdmin_a_sclk_pre_en, + &tdmin_b_sclk_pre_en, + &tdmin_c_sclk_pre_en, + &tdmin_lb_sclk_pre_en, + &tdmout_a_sclk_pre_en, + &tdmout_b_sclk_pre_en, + &tdmout_c_sclk_pre_en, + &tdmin_a_sclk_post_en, + &tdmin_b_sclk_post_en, + &tdmin_c_sclk_post_en, + &tdmin_lb_sclk_post_en, + &tdmout_a_sclk_post_en, + &tdmout_b_sclk_post_en, + &tdmout_c_sclk_post_en, + &tdmin_a_sclk, + &tdmin_b_sclk, + &tdmin_c_sclk, + &tdmin_lb_sclk, + &axg_tdmout_a_sclk, + &axg_tdmout_b_sclk, + &axg_tdmout_c_sclk, + &tdmin_a_lrclk, + &tdmin_b_lrclk, + &tdmin_c_lrclk, + &tdmin_lb_lrclk, + &tdmout_a_lrclk, + &tdmout_b_lrclk, + &tdmout_c_lrclk, +}; + +static struct clk_regmap *const g12a_clk_regmaps[] = { + &ddr_arb, + &pdm, + &tdmin_a, + &tdmin_b, + &tdmin_c, + &tdmin_lb, + &tdmout_a, + &tdmout_b, + &tdmout_c, + &frddr_a, + &frddr_b, + &frddr_c, + &toddr_a, + &toddr_b, + &toddr_c, + &loopback, + &spdifin, + &spdifout, + &resample, + &power_detect, &spdifout_b, &mst_a_mclk_sel, &mst_b_mclk_sel, @@ -1328,9 +1482,9 @@ static struct clk_regmap *const axg_clk_regmaps[] = { &tdmin_b_sclk, &tdmin_c_sclk, &tdmin_lb_sclk, - &tdmout_a_sclk, - &tdmout_b_sclk, - &tdmout_c_sclk, + &g12a_tdmout_a_sclk, + &g12a_tdmout_b_sclk, + &g12a_tdmout_c_sclk, &tdmin_a_lrclk, &tdmin_b_lrclk, &tdmin_c_lrclk, @@ -1465,9 +1619,9 @@ static struct clk_regmap *const sm1_clk_regmaps[] = { &tdmin_b_sclk, &tdmin_c_sclk, &tdmin_lb_sclk, - &tdmout_a_sclk, - &tdmout_b_sclk, - &tdmout_c_sclk, + &g12a_tdmout_a_sclk, + &g12a_tdmout_b_sclk, + &g12a_tdmout_c_sclk, &tdmin_a_lrclk, &tdmin_b_lrclk, &tdmin_c_lrclk, @@ -1713,8 +1867,8 @@ static const struct audioclk_data axg_audioclk_data = { }; static const struct audioclk_data g12a_audioclk_data = { - .regmap_clks = axg_clk_regmaps, - .regmap_clk_num = ARRAY_SIZE(axg_clk_regmaps), + .regmap_clks = g12a_clk_regmaps, + .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps), .hw_onecell_data = &g12a_audio_hw_onecell_data, .reset_offset = AUDIO_SW_RESET, .reset_num = 26, diff --git a/drivers/clk/meson/clk-phase.c b/drivers/clk/meson/clk-phase.c index fe22e171121a..a6763439f7d2 100644 --- a/drivers/clk/meson/clk-phase.c +++ b/drivers/clk/meson/clk-phase.c @@ -125,6 +125,62 @@ const struct clk_ops meson_clk_triphase_ops = { }; EXPORT_SYMBOL_GPL(meson_clk_triphase_ops); +/* + * This is a special clock for the audio controller. + * This drive a bit clock inverter for which the + * opposite value of the inverter bit needs to be manually + * set into another bit + */ +static inline struct meson_sclk_ws_inv_data * +meson_sclk_ws_inv_data(struct clk_regmap *clk) +{ + return (struct meson_sclk_ws_inv_data *)clk->data; +} + +static int meson_sclk_ws_inv_sync(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk); + unsigned int val; + + /* Get phase and sync the inverted value to ws */ + val = meson_parm_read(clk->map, &tph->ph); + meson_parm_write(clk->map, &tph->ws, val ? 0 : 1); + + return 0; +} + +static int meson_sclk_ws_inv_get_phase(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk); + unsigned int val; + + val = meson_parm_read(clk->map, &tph->ph); + + return meson_clk_degrees_from_val(val, tph->ph.width); +} + +static int meson_sclk_ws_inv_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_sclk_ws_inv_data *tph = meson_sclk_ws_inv_data(clk); + unsigned int val; + + val = meson_clk_degrees_to_val(degrees, tph->ph.width); + meson_parm_write(clk->map, &tph->ph, val); + meson_parm_write(clk->map, &tph->ws, val ? 0 : 1); + return 0; +} + +const struct clk_ops meson_sclk_ws_inv_ops = { + .init = meson_sclk_ws_inv_sync, + .get_phase = meson_sclk_ws_inv_get_phase, + .set_phase = meson_sclk_ws_inv_set_phase, +}; +EXPORT_SYMBOL_GPL(meson_sclk_ws_inv_ops); + + MODULE_DESCRIPTION("Amlogic phase driver"); MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/meson/clk-phase.h b/drivers/clk/meson/clk-phase.h index 5579f9ced142..b637b9b227bc 100644 --- a/drivers/clk/meson/clk-phase.h +++ b/drivers/clk/meson/clk-phase.h @@ -20,7 +20,13 @@ struct meson_clk_triphase_data { struct parm ph2; }; +struct meson_sclk_ws_inv_data { + struct parm ph; + struct parm ws; +}; + extern const struct clk_ops meson_clk_phase_ops; extern const struct clk_ops meson_clk_triphase_ops; +extern const struct clk_ops meson_sclk_ws_inv_ops; #endif /* __MESON_CLK_PHASE_H */ diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index 9803d44bb157..b814d44917a5 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -298,6 +298,17 @@ static struct clk_regmap g12a_fclk_div2 = { &g12a_fclk_div2_div.hw }, .num_parents = 1, + /* + * Similar to fclk_div3, it seems that this clock is used by + * the resident firmware and is required by the platform to + * operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, }, }; diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c index bf8bea675d24..3a6d84cd6601 100644 --- a/drivers/clk/meson/meson-aoclk.c +++ b/drivers/clk/meson/meson-aoclk.c @@ -57,7 +57,7 @@ int meson_aoclkc_probe(struct platform_device *pdev) rstc->data = data; rstc->regmap = regmap; rstc->reset.ops = &meson_aoclk_reset_ops; - rstc->reset.nr_resets = data->num_reset, + rstc->reset.nr_resets = data->num_reset; rstc->reset.of_node = dev->of_node; ret = devm_reset_controller_register(dev, &rstc->reset); if (ret) { |