diff options
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/samsung/clk-exynos5250.c | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 870e18b9a687..1fad4c5e3f5d 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -24,6 +24,8 @@ #define APLL_CON0 0x100 #define SRC_CPU 0x200 #define DIV_CPU0 0x500 +#define PWR_CTRL1 0x1020 +#define PWR_CTRL2 0x1024 #define MPLL_LOCK 0x4000 #define MPLL_CON0 0x4100 #define SRC_CORE1 0x4204 @@ -84,6 +86,23 @@ #define SRC_CDREX 0x20200 #define PLL_DIV2_SEL 0x20a24 +/*Below definitions are used for PWR_CTRL settings*/ +#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) +#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) +#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) +#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) +#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) +#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) +#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) +#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) + +#define PWR_CTRL2_DIV2_UP_EN (1 << 25) +#define PWR_CTRL2_DIV1_UP_EN (1 << 24) +#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) +#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) +#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) +#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) + /* list of PLLs to be registered */ enum exynos5250_plls { apll, mpll, cpll, epll, vpll, gpll, bpll, @@ -102,6 +121,8 @@ static struct samsung_clk_reg_dump *exynos5250_save; static unsigned long exynos5250_clk_regs[] __initdata = { SRC_CPU, DIV_CPU0, + PWR_CTRL1, + PWR_CTRL2, SRC_CORE1, SRC_TOP0, SRC_TOP1, @@ -736,6 +757,7 @@ static struct of_device_id ext_clk_match[] __initdata = { static void __init exynos5250_clk_init(struct device_node *np) { struct samsung_clk_provider *ctx; + unsigned int tmp; if (np) { reg_base = of_iomap(np, 0); @@ -776,6 +798,26 @@ static void __init exynos5250_clk_init(struct device_node *np) samsung_clk_register_gate(ctx, exynos5250_gate_clks, ARRAY_SIZE(exynos5250_gate_clks)); + /* + * Enable arm clock down (in idle) and set arm divider + * ratios in WFI/WFE state. + */ + tmp = (PWR_CTRL1_CORE2_DOWN_RATIO | PWR_CTRL1_CORE1_DOWN_RATIO | + PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN | + PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE | + PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI); + __raw_writel(tmp, reg_base + PWR_CTRL1); + + /* + * Enable arm clock up (on exiting idle). Set arm divider + * ratios when not in idle along with the standby duration + * ratios. + */ + tmp = (PWR_CTRL2_DIV2_UP_EN | PWR_CTRL2_DIV1_UP_EN | + PWR_CTRL2_DUR_STANDBY2_VAL | PWR_CTRL2_DUR_STANDBY1_VAL | + PWR_CTRL2_CORE2_UP_RATIO | PWR_CTRL2_CORE1_UP_RATIO); + __raw_writel(tmp, reg_base + PWR_CTRL2); + exynos5250_clk_sleep_init(); pr_info("Exynos5250: clock setup completed, armclk=%ld\n", |