diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/em_sti.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/hyperv_timer.c | 45 | ||||
| -rw-r--r-- | drivers/clocksource/ingenic-timer.c | 356 | ||||
| -rw-r--r-- | drivers/clocksource/renesas-ostm.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/sh_cmt.c | 19 | ||||
| -rw-r--r-- | drivers/clocksource/sh_tmu.c | 5 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-tcb.c | 18 | ||||
| -rw-r--r-- | drivers/clocksource/timer-imx-sysctr.c | 5 | ||||
| -rw-r--r-- | drivers/clocksource/timer-npcm7xx.c | 9 | ||||
| -rw-r--r-- | drivers/clocksource/timer-of.c | 6 | ||||
| -rw-r--r-- | drivers/clocksource/timer-probe.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/timer-riscv.c | 23 | ||||
| -rw-r--r-- | drivers/clocksource/timer-sun4i.c | 4 |
15 files changed, 445 insertions, 69 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5e9317dc3d39..f35a53ce8988 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -429,7 +429,7 @@ config ATMEL_ST config ATMEL_TCB_CLKSRC bool "Atmel TC Block timer driver" if COMPILE_TEST - depends on HAS_IOMEM + depends on ARM && HAS_IOMEM select TIMER_OF if OF help Support for Timer Counter Blocks on Atmel SoCs. @@ -685,4 +685,15 @@ config MILBEAUT_TIMER help Enables the support for Milbeaut timer driver. +config INGENIC_TIMER + bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" + default MACH_INGENIC + depends on MIPS || COMPILE_TEST + depends on COMMON_CLK + select MFD_SYSCON + select TIMER_OF + select IRQ_DOMAIN + help + Support for the timer/counter unit of the Ingenic JZ SoCs. + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 2e7936e7833f..4dfe4225ece7 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o obj-$(CONFIG_H8300_TPU) += h8300_tpu.o +obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c index 8e12b11e81b0..9039df4f90e2 100644 --- a/drivers/clocksource/em_sti.c +++ b/drivers/clocksource/em_sti.c @@ -291,10 +291,8 @@ static int em_sti_probe(struct platform_device *pdev) platform_set_drvdata(pdev, p); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "failed to get irq\n"); + if (irq < 0) return irq; - } /* map memory, let base point to the STI instance */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c index ba2c79e6a0ee..2317d4e3daaf 100644 --- a/drivers/clocksource/hyperv_timer.c +++ b/drivers/clocksource/hyperv_timer.c @@ -22,6 +22,7 @@ #include <asm/mshyperv.h> static struct clock_event_device __percpu *hv_clock_event; +static u64 hv_sched_clock_offset __ro_after_init; /* * If false, we're using the old mechanism for stimer0 interrupts @@ -212,19 +213,17 @@ EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup); struct clocksource *hyperv_cs; EXPORT_SYMBOL_GPL(hyperv_cs); -#ifdef CONFIG_HYPERV_TSCPAGE - -static struct ms_hyperv_tsc_page *tsc_pg; +static struct ms_hyperv_tsc_page tsc_pg __aligned(PAGE_SIZE); struct ms_hyperv_tsc_page *hv_get_tsc_page(void) { - return tsc_pg; + return &tsc_pg; } EXPORT_SYMBOL_GPL(hv_get_tsc_page); -static u64 notrace read_hv_sched_clock_tsc(void) +static u64 notrace read_hv_clock_tsc(struct clocksource *arg) { - u64 current_tick = hv_read_tsc_page(tsc_pg); + u64 current_tick = hv_read_tsc_page(&tsc_pg); if (current_tick == U64_MAX) hv_get_time_ref_count(current_tick); @@ -232,9 +231,9 @@ static u64 notrace read_hv_sched_clock_tsc(void) return current_tick; } -static u64 read_hv_clock_tsc(struct clocksource *arg) +static u64 read_hv_sched_clock_tsc(void) { - return read_hv_sched_clock_tsc(); + return read_hv_clock_tsc(NULL) - hv_sched_clock_offset; } static struct clocksource hyperv_cs_tsc = { @@ -244,9 +243,8 @@ static struct clocksource hyperv_cs_tsc = { .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -#endif -static u64 notrace read_hv_sched_clock_msr(void) +static u64 notrace read_hv_clock_msr(struct clocksource *arg) { u64 current_tick; /* @@ -258,9 +256,9 @@ static u64 notrace read_hv_sched_clock_msr(void) return current_tick; } -static u64 read_hv_clock_msr(struct clocksource *arg) +static u64 read_hv_sched_clock_msr(void) { - return read_hv_sched_clock_msr(); + return read_hv_clock_msr(NULL) - hv_sched_clock_offset; } static struct clocksource hyperv_cs_msr = { @@ -271,7 +269,6 @@ static struct clocksource hyperv_cs_msr = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -#ifdef CONFIG_HYPERV_TSCPAGE static bool __init hv_init_tsc_clocksource(void) { u64 tsc_msr; @@ -280,12 +277,8 @@ static bool __init hv_init_tsc_clocksource(void) if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE)) return false; - tsc_pg = vmalloc(PAGE_SIZE); - if (!tsc_pg) - return false; - hyperv_cs = &hyperv_cs_tsc; - phys_addr = page_to_phys(vmalloc_to_page(tsc_pg)); + phys_addr = virt_to_phys(&tsc_pg); /* * The Hyper-V TLFS specifies to preserve the value of reserved @@ -302,17 +295,11 @@ static bool __init hv_init_tsc_clocksource(void) hv_set_clocksource_vdso(hyperv_cs_tsc); clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100); - /* sched_clock_register is needed on ARM64 but is a no-op on x86 */ - sched_clock_register(read_hv_sched_clock_tsc, 64, HV_CLOCK_HZ); + hv_sched_clock_offset = hyperv_cs->read(hyperv_cs); + hv_setup_sched_clock(read_hv_sched_clock_tsc); + return true; } -#else -static bool __init hv_init_tsc_clocksource(void) -{ - return false; -} -#endif - void __init hv_init_clocksource(void) { @@ -333,7 +320,7 @@ void __init hv_init_clocksource(void) hyperv_cs = &hyperv_cs_msr; clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100); - /* sched_clock_register is needed on ARM64 but is a no-op on x86 */ - sched_clock_register(read_hv_sched_clock_msr, 64, HV_CLOCK_HZ); + hv_sched_clock_offset = hyperv_cs->read(hyperv_cs); + hv_setup_sched_clock(read_hv_sched_clock_msr); } EXPORT_SYMBOL_GPL(hv_init_clocksource); diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c new file mode 100644 index 000000000000..4bbdb3d3d0c6 --- /dev/null +++ b/drivers/clocksource/ingenic-timer.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * JZ47xx SoCs TCU IRQ driver + * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net> + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/interrupt.h> +#include <linux/mfd/ingenic-tcu.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/sched_clock.h> + +#include <dt-bindings/clock/ingenic,tcu.h> + +struct ingenic_soc_info { + unsigned int num_channels; +}; + +struct ingenic_tcu { + struct regmap *map; + struct clk *timer_clk, *cs_clk; + unsigned int timer_channel, cs_channel; + struct clock_event_device cevt; + struct clocksource cs; + char name[4]; + unsigned long pwm_channels_mask; +}; + +static struct ingenic_tcu *ingenic_tcu; + +static u64 notrace ingenic_tcu_timer_read(void) +{ + struct ingenic_tcu *tcu = ingenic_tcu; + unsigned int count; + + regmap_read(tcu->map, TCU_REG_TCNTc(tcu->cs_channel), &count); + + return count; +} + +static u64 notrace ingenic_tcu_timer_cs_read(struct clocksource *cs) +{ + return ingenic_tcu_timer_read(); +} + +static inline struct ingenic_tcu *to_ingenic_tcu(struct clock_event_device *evt) +{ + return container_of(evt, struct ingenic_tcu, cevt); +} + +static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt) +{ + struct ingenic_tcu *tcu = to_ingenic_tcu(evt); + + regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel)); + + return 0; +} + +static int ingenic_tcu_cevt_set_next(unsigned long next, + struct clock_event_device *evt) +{ + struct ingenic_tcu *tcu = to_ingenic_tcu(evt); + + if (next > 0xffff) + return -EINVAL; + + regmap_write(tcu->map, TCU_REG_TDFRc(tcu->timer_channel), next); + regmap_write(tcu->map, TCU_REG_TCNTc(tcu->timer_channel), 0); + regmap_write(tcu->map, TCU_REG_TESR, BIT(tcu->timer_channel)); + + return 0; +} + +static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + struct ingenic_tcu *tcu = to_ingenic_tcu(evt); + + regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel)); + + if (evt->event_handler) + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id) +{ + struct of_phandle_args args; + + args.np = np; + args.args_count = 1; + args.args[0] = id; + + return of_clk_get_from_provider(&args); +} + +static int __init ingenic_tcu_timer_init(struct device_node *np, + struct ingenic_tcu *tcu) +{ + unsigned int timer_virq, channel = tcu->timer_channel; + struct irq_domain *domain; + unsigned long rate; + int err; + + tcu->timer_clk = ingenic_tcu_get_clock(np, channel); + if (IS_ERR(tcu->timer_clk)) + return PTR_ERR(tcu->timer_clk); + + err = clk_prepare_enable(tcu->timer_clk); + if (err) + goto err_clk_put; + + rate = clk_get_rate(tcu->timer_clk); + if (!rate) { + err = -EINVAL; + goto err_clk_disable; + } + + domain = irq_find_host(np); + if (!domain) { + err = -ENODEV; + goto err_clk_disable; + } + + timer_virq = irq_create_mapping(domain, channel); + if (!timer_virq) { + err = -EINVAL; + goto err_clk_disable; + } + + snprintf(tcu->name, sizeof(tcu->name), "TCU"); + + err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER, + tcu->name, &tcu->cevt); + if (err) + goto err_irq_dispose_mapping; + + tcu->cevt.cpumask = cpumask_of(smp_processor_id()); + tcu->cevt.features = CLOCK_EVT_FEAT_ONESHOT; + tcu->cevt.name = tcu->name; + tcu->cevt.rating = 200; + tcu->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown; + tcu->cevt.set_next_event = ingenic_tcu_cevt_set_next; + + clockevents_config_and_register(&tcu->cevt, rate, 10, 0xffff); + + return 0; + +err_irq_dispose_mapping: + irq_dispose_mapping(timer_virq); +err_clk_disable: + clk_disable_unprepare(tcu->timer_clk); +err_clk_put: + clk_put(tcu->timer_clk); + return err; +} + +static int __init ingenic_tcu_clocksource_init(struct device_node *np, + struct ingenic_tcu *tcu) +{ + unsigned int channel = tcu->cs_channel; + struct clocksource *cs = &tcu->cs; + unsigned long rate; + int err; + + tcu->cs_clk = ingenic_tcu_get_clock(np, channel); + if (IS_ERR(tcu->cs_clk)) + return PTR_ERR(tcu->cs_clk); + + err = clk_prepare_enable(tcu->cs_clk); + if (err) + goto err_clk_put; + + rate = clk_get_rate(tcu->cs_clk); + if (!rate) { + err = -EINVAL; + goto err_clk_disable; + } + + /* Reset channel */ + regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel), + 0xffff & ~TCU_TCSR_RESERVED_BITS, 0); + + /* Reset counter */ + regmap_write(tcu->map, TCU_REG_TDFRc(channel), 0xffff); + regmap_write(tcu->map, TCU_REG_TCNTc(channel), 0); + + /* Enable channel */ + regmap_write(tcu->map, TCU_REG_TESR, BIT(channel)); + + cs->name = "ingenic-timer"; + cs->rating = 200; + cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; + cs->mask = CLOCKSOURCE_MASK(16); + cs->read = ingenic_tcu_timer_cs_read; + + err = clocksource_register_hz(cs, rate); + if (err) + goto err_clk_disable; + + return 0; + +err_clk_disable: + clk_disable_unprepare(tcu->cs_clk); +err_clk_put: + clk_put(tcu->cs_clk); + return err; +} + +static const struct ingenic_soc_info jz4740_soc_info = { + .num_channels = 8, +}; + +static const struct ingenic_soc_info jz4725b_soc_info = { + .num_channels = 6, +}; + +static const struct of_device_id ingenic_tcu_of_match[] = { + { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, }, + { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, }, + { .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, }, + { /* sentinel */ } +}; + +static int __init ingenic_tcu_init(struct device_node *np) +{ + const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np); + const struct ingenic_soc_info *soc_info = id->data; + struct ingenic_tcu *tcu; + struct regmap *map; + long rate; + int ret; + + of_node_clear_flag(np, OF_POPULATED); + + map = device_node_to_regmap(np); + if (IS_ERR(map)) + return PTR_ERR(map); + + tcu = kzalloc(sizeof(*tcu), GFP_KERNEL); + if (!tcu) + return -ENOMEM; + + /* Enable all TCU channels for PWM use by default except channels 0/1 */ + tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1, 2); + of_property_read_u32(np, "ingenic,pwm-channels-mask", + (u32 *)&tcu->pwm_channels_mask); + + /* Verify that we have at least two free channels */ + if (hweight8(tcu->pwm_channels_mask) > soc_info->num_channels - 2) { + pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__, + tcu->pwm_channels_mask); + ret = -EINVAL; + goto err_free_ingenic_tcu; + } + + tcu->map = map; + ingenic_tcu = tcu; + + tcu->timer_channel = find_first_zero_bit(&tcu->pwm_channels_mask, + soc_info->num_channels); + tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask, + soc_info->num_channels, + tcu->timer_channel + 1); + + ret = ingenic_tcu_clocksource_init(np, tcu); + if (ret) { + pr_crit("%s: Unable to init clocksource: %d\n", __func__, ret); + goto err_free_ingenic_tcu; + } + + ret = ingenic_tcu_timer_init(np, tcu); + if (ret) + goto err_tcu_clocksource_cleanup; + + /* Register the sched_clock at the end as there's no way to undo it */ + rate = clk_get_rate(tcu->cs_clk); + sched_clock_register(ingenic_tcu_timer_read, 16, rate); + + return 0; + +err_tcu_clocksource_cleanup: + clocksource_unregister(&tcu->cs); + clk_disable_unprepare(tcu->cs_clk); + clk_put(tcu->cs_clk); +err_free_ingenic_tcu: + kfree(tcu); + return ret; +} + +TIMER_OF_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu", ingenic_tcu_init); +TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init); +TIMER_OF_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu", ingenic_tcu_init); + + +static int __init ingenic_tcu_probe(struct platform_device *pdev) +{ + platform_set_drvdata(pdev, ingenic_tcu); + + return 0; +} + +static int __maybe_unused ingenic_tcu_suspend(struct device *dev) +{ + struct ingenic_tcu *tcu = dev_get_drvdata(dev); + + clk_disable(tcu->cs_clk); + clk_disable(tcu->timer_clk); + return 0; +} + +static int __maybe_unused ingenic_tcu_resume(struct device *dev) +{ + struct ingenic_tcu *tcu = dev_get_drvdata(dev); + int ret; + + ret = clk_enable(tcu->timer_clk); + if (ret) + return ret; + + ret = clk_enable(tcu->cs_clk); + if (ret) { + clk_disable(tcu->timer_clk); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = { + /* _noirq: We want the TCU clocks to be gated last / ungated first */ + .suspend_noirq = ingenic_tcu_suspend, + .resume_noirq = ingenic_tcu_resume, +}; + +static struct platform_driver ingenic_tcu_driver = { + .driver = { + .name = "ingenic-tcu-timer", +#ifdef CONFIG_PM_SLEEP + .pm = &ingenic_tcu_pm_ops, +#endif + .of_match_table = ingenic_tcu_of_match, + }, +}; +builtin_platform_driver_probe(ingenic_tcu_driver, ingenic_tcu_probe); diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c index 61d5f3b539ce..37c39b901bb1 100644 --- a/drivers/clocksource/renesas-ostm.c +++ b/drivers/clocksource/renesas-ostm.c @@ -221,7 +221,7 @@ static int __init ostm_init(struct device_node *np) } rate = clk_get_rate(ostm_clk); - ostm->ticks_per_jiffy = (rate + HZ / 2) / HZ; + ostm->ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); /* * First probed device will be used as system clocksource. Any diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 55d3e03f2cd4..ef773db080e9 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -776,11 +776,8 @@ static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch, int ret; irq = platform_get_irq(ch->cmt->pdev, ch->index); - if (irq < 0) { - dev_err(&ch->cmt->pdev->dev, "ch%u: failed to get irq\n", - ch->index); + if (irq < 0) return irq; - } ret = request_irq(irq, sh_cmt_interrupt, IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING, @@ -921,13 +918,25 @@ static const struct platform_device_id sh_cmt_id_table[] = { MODULE_DEVICE_TABLE(platform, sh_cmt_id_table); static const struct of_device_id sh_cmt_of_table[] __maybe_unused = { - { .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] }, + { + /* deprecated, preserved for backward compatibility */ + .compatible = "renesas,cmt-48", + .data = &sh_cmt_info[SH_CMT_48BIT] + }, { /* deprecated, preserved for backward compatibility */ .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2] }, { + .compatible = "renesas,r8a7740-cmt1", + .data = &sh_cmt_info[SH_CMT_48BIT] + }, + { + .compatible = "renesas,sh73a0-cmt1", + .data = &sh_cmt_info[SH_CMT_48BIT] + }, + { .compatible = "renesas,rcar-gen2-cmt0", .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2] }, diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 49f1c805fc95..8c4f3753b36e 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -462,11 +462,8 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index, ch->base = tmu->mapbase + 8 + ch->index * 12; ch->irq = platform_get_irq(tmu->pdev, index); - if (ch->irq < 0) { - dev_err(&tmu->pdev->dev, "ch%u: failed to get irq\n", - ch->index); + if (ch->irq < 0) return ch->irq; - } ch->cs_enabled = false; ch->enable_count = 0; diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c index 6ed31f9def7e..7427b07495a8 100644 --- a/drivers/clocksource/timer-atmel-tcb.c +++ b/drivers/clocksource/timer-atmel-tcb.c @@ -6,6 +6,7 @@ #include <linux/irq.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/ioport.h> #include <linux/io.h> @@ -125,6 +126,18 @@ static u64 notrace tc_sched_clock_read32(void) return tc_get_cycles32(&clksrc); } +static struct delay_timer tc_delay_timer; + +static unsigned long tc_delay_timer_read(void) +{ + return tc_get_cycles(&clksrc); +} + +static unsigned long notrace tc_delay_timer_read32(void) +{ + return tc_get_cycles32(&clksrc); +} + #ifdef CONFIG_GENERIC_CLOCKEVENTS struct tc_clkevt_device { @@ -432,6 +445,7 @@ static int __init tcb_clksrc_init(struct device_node *node) /* setup ony channel 0 */ tcb_setup_single_chan(&tc, best_divisor_idx); tc_sched_clock = tc_sched_clock_read32; + tc_delay_timer.read_current_timer = tc_delay_timer_read32; } else { /* we have three clocks no matter what the * underlying platform supports. @@ -444,6 +458,7 @@ static int __init tcb_clksrc_init(struct device_node *node) /* setup both channel 0 & 1 */ tcb_setup_dual_chan(&tc, best_divisor_idx); tc_sched_clock = tc_sched_clock_read; + tc_delay_timer.read_current_timer = tc_delay_timer_read; } /* and away we go! */ @@ -458,6 +473,9 @@ static int __init tcb_clksrc_init(struct device_node *node) sched_clock_register(tc_sched_clock, 32, divided_rate); + tc_delay_timer.freq = divided_rate; + register_current_timer_delay(&tc_delay_timer); + return 0; err_unregister_clksrc: diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c index fd7d68066efb..b7c80a368a1b 100644 --- a/drivers/clocksource/timer-imx-sysctr.c +++ b/drivers/clocksource/timer-imx-sysctr.c @@ -20,6 +20,8 @@ #define SYS_CTR_EN 0x1 #define SYS_CTR_IRQ_MASK 0x2 +#define SYS_CTR_CLK_DIV 0x3 + static void __iomem *sys_ctr_base; static u32 cmpcr; @@ -134,6 +136,9 @@ static int __init sysctr_timer_init(struct device_node *np) if (ret) return ret; + /* system counter clock is divided by 3 internally */ + to_sysctr.of_clk.rate /= SYS_CTR_CLK_DIV; + sys_ctr_base = timer_of_base(&to_sysctr); cmpcr = readl(sys_ctr_base + CMPCR); cmpcr &= ~SYS_CTR_EN; diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c index 8a30da7f083b..9780ffd8010e 100644 --- a/drivers/clocksource/timer-npcm7xx.c +++ b/drivers/clocksource/timer-npcm7xx.c @@ -32,7 +32,7 @@ #define NPCM7XX_Tx_INTEN BIT(29) #define NPCM7XX_Tx_COUNTEN BIT(30) #define NPCM7XX_Tx_ONESHOT 0x0 -#define NPCM7XX_Tx_OPER GENMASK(27, 3) +#define NPCM7XX_Tx_OPER GENMASK(28, 27) #define NPCM7XX_Tx_MIN_PRESCALE 0x1 #define NPCM7XX_Tx_TDR_MASK_BITS 24 #define NPCM7XX_Tx_MAX_CNT 0xFFFFFF @@ -84,8 +84,6 @@ static int npcm7xx_timer_oneshot(struct clock_event_device *evt) val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0); val &= ~NPCM7XX_Tx_OPER; - - val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0); val |= NPCM7XX_START_ONESHOT_Tx; writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0); @@ -97,12 +95,11 @@ static int npcm7xx_timer_periodic(struct clock_event_device *evt) struct timer_of *to = to_timer_of(evt); u32 val; + writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0); + val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0); val &= ~NPCM7XX_Tx_OPER; - - writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0); val |= NPCM7XX_START_PERIODIC_Tx; - writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0); return 0; diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c index 80542289fae7..d8c2bd4391d0 100644 --- a/drivers/clocksource/timer-of.c +++ b/drivers/clocksource/timer-of.c @@ -113,8 +113,10 @@ static __init int timer_of_clk_init(struct device_node *np, of_clk->clk = of_clk->name ? of_clk_get_by_name(np, of_clk->name) : of_clk_get(np, of_clk->index); if (IS_ERR(of_clk->clk)) { - pr_err("Failed to get clock for %pOF\n", np); - return PTR_ERR(of_clk->clk); + ret = PTR_ERR(of_clk->clk); + if (ret != -EPROBE_DEFER) + pr_err("Failed to get clock for %pOF\n", np); + goto out; } ret = clk_prepare_enable(of_clk->clk); diff --git a/drivers/clocksource/timer-probe.c b/drivers/clocksource/timer-probe.c index dda1946e84dd..ee9574da53c0 100644 --- a/drivers/clocksource/timer-probe.c +++ b/drivers/clocksource/timer-probe.c @@ -29,7 +29,9 @@ void __init timer_probe(void) ret = init_func_ret(np); if (ret) { - pr_err("Failed to initialize '%pOF': %d\n", np, ret); + if (ret != -EPROBE_DEFER) + pr_err("Failed to initialize '%pOF': %d\n", np, + ret); continue; } diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c index 5e6038fbf115..470c7ef02ea4 100644 --- a/drivers/clocksource/timer-riscv.c +++ b/drivers/clocksource/timer-riscv.c @@ -2,6 +2,10 @@ /* * Copyright (C) 2012 Regents of the University of California * Copyright (C) 2017 SiFive + * + * All RISC-V systems have a timer attached to every hart. These timers can be + * read from the "time" and "timeh" CSRs, and can use the SBI to setup + * events. */ #include <linux/clocksource.h> #include <linux/clockchips.h> @@ -12,19 +16,6 @@ #include <asm/smp.h> #include <asm/sbi.h> -/* - * All RISC-V systems have a timer attached to every hart. These timers can be - * read by the 'rdcycle' pseudo instruction, and can use the SBI to setup - * events. In order to abstract the architecture-specific timer reading and - * setting functions away from the clock event insertion code, we provide - * function pointers to the clockevent subsystem that perform two basic - * operations: rdtime() reads the timer on the current CPU, and - * next_event(delta) sets the next timer event to 'delta' cycles in the future. - * As the timers are inherently a per-cpu resource, these callbacks perform - * operations on the current hart. There is guaranteed to be exactly one timer - * per hart on all RISC-V systems. - */ - static int riscv_clock_next_event(unsigned long delta, struct clock_event_device *ce) { @@ -55,7 +46,7 @@ static u64 riscv_sched_clock(void) return get_cycles64(); } -static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = { +static struct clocksource riscv_clocksource = { .name = "riscv_clocksource", .rating = 300, .mask = CLOCKSOURCE_MASK(64), @@ -92,7 +83,6 @@ void riscv_timer_interrupt(void) static int __init riscv_timer_init_dt(struct device_node *n) { int cpuid, hartid, error; - struct clocksource *cs; hartid = riscv_of_processor_hartid(n); if (hartid < 0) { @@ -112,8 +102,7 @@ static int __init riscv_timer_init_dt(struct device_node *n) pr_info("%s: Registering clocksource cpuid [%d] hartid [%d]\n", __func__, cpuid, hartid); - cs = per_cpu_ptr(&riscv_clocksource, cpuid); - error = clocksource_register_hz(cs, riscv_timebase); + error = clocksource_register_hz(&riscv_clocksource, riscv_timebase); if (error) { pr_err("RISCV timer register failed [%d] for cpu = [%d]\n", error, cpuid); diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c index 65f38f6ca714..0ba8155b8287 100644 --- a/drivers/clocksource/timer-sun4i.c +++ b/drivers/clocksource/timer-sun4i.c @@ -219,5 +219,9 @@ static int __init sun4i_timer_init(struct device_node *node) } TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer", sun4i_timer_init); +TIMER_OF_DECLARE(sun8i_a23, "allwinner,sun8i-a23-timer", + sun4i_timer_init); +TIMER_OF_DECLARE(sun8i_v3s, "allwinner,sun8i-v3s-timer", + sun4i_timer_init); TIMER_OF_DECLARE(suniv, "allwinner,suniv-f1c100s-timer", sun4i_timer_init); |