1 files changed, 101 insertions, 52 deletions

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 6bbb8b913446..91ebe282b106 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -18,6 +18,7 @@
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
+#include <linux/cpufreq-dt.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/module.h>
@@ -57,6 +58,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 	old_freq = clk_get_rate(cpu_clk) / 1000;
 
 	if (!IS_ERR(cpu_reg)) {
+		unsigned long opp_freq;
+
 		rcu_read_lock();
 		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
 		if (IS_ERR(opp)) {
@@ -66,13 +69,16 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 			return PTR_ERR(opp);
 		}
 		volt = dev_pm_opp_get_voltage(opp);
+		opp_freq = dev_pm_opp_get_freq(opp);
 		rcu_read_unlock();
 		tol = volt * priv->voltage_tolerance / 100;
 		volt_old = regulator_get_voltage(cpu_reg);
+		dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n",
+			opp_freq / 1000, volt);
 	}
 
 	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
-		old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+		old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
 		new_freq / 1000, volt ? volt / 1000 : -1);
 
 	/* scaling up?  scale voltage before frequency */
@@ -88,7 +94,7 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 	ret = clk_set_rate(cpu_clk, freq_exact);
 	if (ret) {
 		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
-		if (!IS_ERR(cpu_reg))
+		if (!IS_ERR(cpu_reg) && volt_old > 0)
 			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
 		return ret;
 	}
@@ -146,8 +152,8 @@ try_again:
 			goto try_again;
 		}
 
-		dev_warn(cpu_dev, "failed to get cpu%d regulator: %ld\n",
-			 cpu, PTR_ERR(cpu_reg));
+		dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n",
+			cpu, PTR_ERR(cpu_reg));
 	}
 
 	cpu_clk = clk_get(cpu_dev, NULL);
@@ -165,8 +171,8 @@ try_again:
 		if (ret == -EPROBE_DEFER)
 			dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
 		else
-			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret,
-				cpu);
+			dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
+				ret);
 	} else {
 		*cdev = cpu_dev;
 		*creg = cpu_reg;
@@ -178,19 +184,20 @@ try_again:
 
 static int cpufreq_init(struct cpufreq_policy *policy)
 {
+	struct cpufreq_dt_platform_data *pd;
 	struct cpufreq_frequency_table *freq_table;
-	struct thermal_cooling_device *cdev;
 	struct device_node *np;
 	struct private_data *priv;
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
+	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	int ret;
 
 	ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
 	if (ret) {
-		pr_err("%s: Failed to allocate resources\n: %d", __func__, ret);
+		pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -204,16 +211,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	/* OPPs might be populated at runtime, don't check for error here */
 	of_init_opp_table(cpu_dev);
 
-	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-	if (ret) {
-		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-		goto out_put_node;
-	}
-
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		ret = -ENOMEM;
-		goto out_free_table;
+		goto out_free_opp;
 	}
 
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
@@ -222,42 +223,49 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		transition_latency = CPUFREQ_ETERNAL;
 
 	if (!IS_ERR(cpu_reg)) {
-		struct dev_pm_opp *opp;
-		unsigned long min_uV, max_uV;
-		int i;
+		unsigned long opp_freq = 0;
 
 		/*
-		 * OPP is maintained in order of increasing frequency, and
-		 * freq_table initialised from OPP is therefore sorted in the
-		 * same order.
+		 * Disable any OPPs where the connected regulator isn't able to
+		 * provide the specified voltage and record minimum and maximum
+		 * voltage levels.
 		 */
-		for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
-			;
-		rcu_read_lock();
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[0].frequency * 1000, true);
-		min_uV = dev_pm_opp_get_voltage(opp);
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[i-1].frequency * 1000, true);
-		max_uV = dev_pm_opp_get_voltage(opp);
-		rcu_read_unlock();
+		while (1) {
+			struct dev_pm_opp *opp;
+			unsigned long opp_uV, tol_uV;
+
+			rcu_read_lock();
+			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
+			if (IS_ERR(opp)) {
+				rcu_read_unlock();
+				break;
+			}
+			opp_uV = dev_pm_opp_get_voltage(opp);
+			rcu_read_unlock();
+
+			tol_uV = opp_uV * priv->voltage_tolerance / 100;
+			if (regulator_is_supported_voltage(cpu_reg, opp_uV,
+							   opp_uV + tol_uV)) {
+				if (opp_uV < min_uV)
+					min_uV = opp_uV;
+				if (opp_uV > max_uV)
+					max_uV = opp_uV;
+			} else {
+				dev_pm_opp_disable(cpu_dev, opp_freq);
+			}
+
+			opp_freq++;
+		}
+
 		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
 		if (ret > 0)
 			transition_latency += ret * 1000;
 	}
 
-	/*
-	 * For now, just loading the cooling device;
-	 * thermal DT code takes care of matching them.
-	 */
-	if (of_find_property(np, "#cooling-cells", NULL)) {
-		cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
-		if (IS_ERR(cdev))
-			dev_err(cpu_dev,
-				"running cpufreq without cooling device: %ld\n",
-				PTR_ERR(cdev));
-		else
-			priv->cdev = cdev;
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+	if (ret) {
+		pr_err("failed to init cpufreq table: %d\n", ret);
+		goto out_free_priv;
 	}
 
 	priv->cpu_dev = cpu_dev;
@@ -265,20 +273,29 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	policy->driver_data = priv;
 
 	policy->clk = cpu_clk;
-	ret = cpufreq_generic_init(policy, freq_table, transition_latency);
-	if (ret)
-		goto out_cooling_unregister;
+	ret = cpufreq_table_validate_and_show(policy, freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+			ret);
+		goto out_free_cpufreq_table;
+	}
+
+	policy->cpuinfo.transition_latency = transition_latency;
+
+	pd = cpufreq_get_driver_data();
+	if (!pd || !pd->independent_clocks)
+		cpumask_setall(policy->cpus);
 
 	of_node_put(np);
 
 	return 0;
 
-out_cooling_unregister:
-	cpufreq_cooling_unregister(priv->cdev);
-	kfree(priv);
-out_free_table:
+out_free_cpufreq_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-out_put_node:
+out_free_priv:
+	kfree(priv);
+out_free_opp:
+	of_free_opp_table(cpu_dev);
 	of_node_put(np);
 out_put_reg_clk:
 	clk_put(cpu_clk);
@@ -292,8 +309,10 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct private_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
+	if (priv->cdev)
+		cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
+	of_free_opp_table(priv->cpu_dev);
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
@@ -302,6 +321,33 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
+static void cpufreq_ready(struct cpufreq_policy *policy)
+{
+	struct private_data *priv = policy->driver_data;
+	struct device_node *np = of_node_get(priv->cpu_dev->of_node);
+
+	if (WARN_ON(!np))
+		return;
+
+	/*
+	 * For now, just loading the cooling device;
+	 * thermal DT code takes care of matching them.
+	 */
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		priv->cdev = of_cpufreq_cooling_register(np,
+							 policy->related_cpus);
+		if (IS_ERR(priv->cdev)) {
+			dev_err(priv->cpu_dev,
+				"running cpufreq without cooling device: %ld\n",
+				PTR_ERR(priv->cdev));
+
+			priv->cdev = NULL;
+		}
+	}
+
+	of_node_put(np);
+}
+
 static struct cpufreq_driver dt_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify = cpufreq_generic_frequency_table_verify,
@@ -309,6 +355,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 	.get = cpufreq_generic_get,
 	.init = cpufreq_init,
 	.exit = cpufreq_exit,
+	.ready = cpufreq_ready,
 	.name = "cpufreq-dt",
 	.attr = cpufreq_generic_attr,
 };
@@ -335,6 +382,8 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	if (!IS_ERR(cpu_reg))
 		regulator_put(cpu_reg);
 
+	dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
+
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)
 		dev_err(cpu_dev, "failed register driver: %d\n", ret);