diff options
Diffstat (limited to 'drivers/crypto/nx/nx-842-powernv.c')
| -rw-r--r-- | drivers/crypto/nx/nx-842-powernv.c | 637 |
1 files changed, 637 insertions, 0 deletions
diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c new file mode 100644 index 000000000000..33b3b0abf4ae --- /dev/null +++ b/drivers/crypto/nx/nx-842-powernv.c @@ -0,0 +1,637 @@ +/* + * Driver for IBM PowerNV 842 compression accelerator + * + * Copyright (C) 2015 Dan Streetman, IBM Corp + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "nx-842.h" + +#include <linux/timer.h> + +#include <asm/prom.h> +#include <asm/icswx.h> + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>"); +MODULE_DESCRIPTION("842 H/W Compression driver for IBM PowerNV processors"); + +#define WORKMEM_ALIGN (CRB_ALIGN) +#define CSB_WAIT_MAX (5000) /* ms */ + +struct nx842_workmem { + /* Below fields must be properly aligned */ + struct coprocessor_request_block crb; /* CRB_ALIGN align */ + struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */ + struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */ + /* Above fields must be properly aligned */ + + ktime_t start; + + char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */ +} __packed __aligned(WORKMEM_ALIGN); + +struct nx842_coproc { + unsigned int chip_id; + unsigned int ct; + unsigned int ci; + struct list_head list; +}; + +/* no cpu hotplug on powernv, so this list never changes after init */ +static LIST_HEAD(nx842_coprocs); +static unsigned int nx842_ct; + +/** + * setup_indirect_dde - Setup an indirect DDE + * + * The DDE is setup with the the DDE count, byte count, and address of + * first direct DDE in the list. + */ +static void setup_indirect_dde(struct data_descriptor_entry *dde, + struct data_descriptor_entry *ddl, + unsigned int dde_count, unsigned int byte_count) +{ + dde->flags = 0; + dde->count = dde_count; + dde->index = 0; + dde->length = cpu_to_be32(byte_count); + dde->address = cpu_to_be64(nx842_get_pa(ddl)); +} + +/** + * setup_direct_dde - Setup single DDE from buffer + * + * The DDE is setup with the buffer and length. The buffer must be properly + * aligned. The used length is returned. + * Returns: + * N Successfully set up DDE with N bytes + */ +static unsigned int setup_direct_dde(struct data_descriptor_entry *dde, + unsigned long pa, unsigned int len) +{ + unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa)); + + dde->flags = 0; + dde->count = 0; + dde->index = 0; + dde->length = cpu_to_be32(l); + dde->address = cpu_to_be64(pa); + + return l; +} + +/** + * setup_ddl - Setup DDL from buffer + * + * Returns: + * 0 Successfully set up DDL + */ +static int setup_ddl(struct data_descriptor_entry *dde, + struct data_descriptor_entry *ddl, + unsigned char *buf, unsigned int len, + bool in) +{ + unsigned long pa = nx842_get_pa(buf); + int i, ret, total_len = len; + + if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) { + pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n", + in ? "input" : "output", pa, DDE_BUFFER_ALIGN); + return -EINVAL; + } + + /* only need to check last mult; since buffer must be + * DDE_BUFFER_ALIGN aligned, and that is a multiple of + * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers + * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT. + */ + if (len % DDE_BUFFER_LAST_MULT) { + pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n", + in ? "input" : "output", len, DDE_BUFFER_LAST_MULT); + if (in) + return -EINVAL; + len = round_down(len, DDE_BUFFER_LAST_MULT); + } + + /* use a single direct DDE */ + if (len <= LEN_ON_PAGE(pa)) { + ret = setup_direct_dde(dde, pa, len); + WARN_ON(ret < len); + return 0; + } + + /* use the DDL */ + for (i = 0; i < DDL_LEN_MAX && len > 0; i++) { + ret = setup_direct_dde(&ddl[i], pa, len); + buf += ret; + len -= ret; + pa = nx842_get_pa(buf); + } + + if (len > 0) { + pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n", + total_len, in ? "input" : "output", len); + if (in) + return -EMSGSIZE; + total_len -= len; + } + setup_indirect_dde(dde, ddl, i, total_len); + + return 0; +} + +#define CSB_ERR(csb, msg, ...) \ + pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \ + ##__VA_ARGS__, (csb)->flags, \ + (csb)->cs, (csb)->cc, (csb)->ce, \ + be32_to_cpu((csb)->count)) + +#define CSB_ERR_ADDR(csb, msg, ...) \ + CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__, \ + (unsigned long)be64_to_cpu((csb)->address)) + +/** + * wait_for_csb + */ +static int wait_for_csb(struct nx842_workmem *wmem, + struct coprocessor_status_block *csb) +{ + ktime_t start = wmem->start, now = ktime_get(); + ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX); + + while (!(ACCESS_ONCE(csb->flags) & CSB_V)) { + cpu_relax(); + now = ktime_get(); + if (ktime_after(now, timeout)) + break; + } + + /* hw has updated csb and output buffer */ + barrier(); + + /* check CSB flags */ + if (!(csb->flags & CSB_V)) { + CSB_ERR(csb, "CSB still not valid after %ld us, giving up", + (long)ktime_us_delta(now, start)); + return -ETIMEDOUT; + } + if (csb->flags & CSB_F) { + CSB_ERR(csb, "Invalid CSB format"); + return -EPROTO; + } + if (csb->flags & CSB_CH) { + CSB_ERR(csb, "Invalid CSB chaining state"); + return -EPROTO; + } + + /* verify CSB completion sequence is 0 */ + if (csb->cs) { + CSB_ERR(csb, "Invalid CSB completion sequence"); + return -EPROTO; + } + + /* check CSB Completion Code */ + switch (csb->cc) { + /* no error */ + case CSB_CC_SUCCESS: + break; + case CSB_CC_TPBC_GT_SPBC: + /* not an error, but the compressed data is + * larger than the uncompressed data :( + */ + break; + + /* input data errors */ + case CSB_CC_OPERAND_OVERLAP: + /* input and output buffers overlap */ + CSB_ERR(csb, "Operand Overlap error"); + return -EINVAL; + case CSB_CC_INVALID_OPERAND: + CSB_ERR(csb, "Invalid operand"); + return -EINVAL; + case CSB_CC_NOSPC: + /* output buffer too small */ + return -ENOSPC; + case CSB_CC_ABORT: + CSB_ERR(csb, "Function aborted"); + return -EINTR; + case CSB_CC_CRC_MISMATCH: + CSB_ERR(csb, "CRC mismatch"); + return -EINVAL; + case CSB_CC_TEMPL_INVALID: + CSB_ERR(csb, "Compressed data template invalid"); + return -EINVAL; + case CSB_CC_TEMPL_OVERFLOW: + CSB_ERR(csb, "Compressed data template shows data past end"); + return -EINVAL; + + /* these should not happen */ + case CSB_CC_INVALID_ALIGN: + /* setup_ddl should have detected this */ + CSB_ERR_ADDR(csb, "Invalid alignment"); + return -EINVAL; + case CSB_CC_DATA_LENGTH: + /* setup_ddl should have detected this */ + CSB_ERR(csb, "Invalid data length"); + return -EINVAL; + case CSB_CC_WR_TRANSLATION: + case CSB_CC_TRANSLATION: + case CSB_CC_TRANSLATION_DUP1: + case CSB_CC_TRANSLATION_DUP2: + case CSB_CC_TRANSLATION_DUP3: + case CSB_CC_TRANSLATION_DUP4: + case CSB_CC_TRANSLATION_DUP5: + case CSB_CC_TRANSLATION_DUP6: + /* should not happen, we use physical addrs */ + CSB_ERR_ADDR(csb, "Translation error"); + return -EPROTO; + case CSB_CC_WR_PROTECTION: + case CSB_CC_PROTECTION: + case CSB_CC_PROTECTION_DUP1: + case CSB_CC_PROTECTION_DUP2: + case CSB_CC_PROTECTION_DUP3: + case CSB_CC_PROTECTION_DUP4: + case CSB_CC_PROTECTION_DUP5: + case CSB_CC_PROTECTION_DUP6: + /* should not happen, we use physical addrs */ + CSB_ERR_ADDR(csb, "Protection error"); + return -EPROTO; + case CSB_CC_PRIVILEGE: + /* shouldn't happen, we're in HYP mode */ + CSB_ERR(csb, "Insufficient Privilege error"); + return -EPROTO; + case CSB_CC_EXCESSIVE_DDE: + /* shouldn't happen, setup_ddl doesn't use many dde's */ + CSB_ERR(csb, "Too many DDEs in DDL"); + return -EINVAL; + case CSB_CC_TRANSPORT: + /* shouldn't happen, we setup CRB correctly */ + CSB_ERR(csb, "Invalid CRB"); + return -EINVAL; + case CSB_CC_SEGMENTED_DDL: + /* shouldn't happen, setup_ddl creates DDL right */ + CSB_ERR(csb, "Segmented DDL error"); + return -EINVAL; + case CSB_CC_DDE_OVERFLOW: + /* shouldn't happen, setup_ddl creates DDL right */ + CSB_ERR(csb, "DDE overflow error"); + return -EINVAL; + case CSB_CC_SESSION: + /* should not happen with ICSWX */ + CSB_ERR(csb, "Session violation error"); + return -EPROTO; + case CSB_CC_CHAIN: + /* should not happen, we don't use chained CRBs */ + CSB_ERR(csb, "Chained CRB error"); + return -EPROTO; + case CSB_CC_SEQUENCE: + /* should not happen, we don't use chained CRBs */ + CSB_ERR(csb, "CRB seqeunce number error"); + return -EPROTO; + case CSB_CC_UNKNOWN_CODE: + CSB_ERR(csb, "Unknown subfunction code"); + return -EPROTO; + + /* hardware errors */ + case CSB_CC_RD_EXTERNAL: + case CSB_CC_RD_EXTERNAL_DUP1: + case CSB_CC_RD_EXTERNAL_DUP2: + case CSB_CC_RD_EXTERNAL_DUP3: + CSB_ERR_ADDR(csb, "Read error outside coprocessor"); + return -EPROTO; + case CSB_CC_WR_EXTERNAL: + CSB_ERR_ADDR(csb, "Write error outside coprocessor"); + return -EPROTO; + case CSB_CC_INTERNAL: + CSB_ERR(csb, "Internal error in coprocessor"); + return -EPROTO; + case CSB_CC_PROVISION: + CSB_ERR(csb, "Storage provision error"); + return -EPROTO; + case CSB_CC_HW: + CSB_ERR(csb, "Correctable hardware error"); + return -EPROTO; + + default: + CSB_ERR(csb, "Invalid CC %d", csb->cc); + return -EPROTO; + } + + /* check Completion Extension state */ + if (csb->ce & CSB_CE_TERMINATION) { + CSB_ERR(csb, "CSB request was terminated"); + return -EPROTO; + } + if (csb->ce & CSB_CE_INCOMPLETE) { + CSB_ERR(csb, "CSB request not complete"); + return -EPROTO; + } + if (!(csb->ce & CSB_CE_TPBC)) { + CSB_ERR(csb, "TPBC not provided, unknown target length"); + return -EPROTO; + } + + /* successful completion */ + pr_debug_ratelimited("Processed %u bytes in %lu us\n", csb->count, + (unsigned long)ktime_us_delta(now, start)); + + return 0; +} + +/** + * nx842_powernv_function - compress/decompress data using the 842 algorithm + * + * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems. + * This compresses or decompresses the provided input buffer into the provided + * output buffer. + * + * Upon return from this function @outlen contains the length of the + * output data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * The @workmem buffer should only be used by one function call at a time. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * @fc: function code, see CCW Function Codes in nx-842.h + * + * Returns: + * 0 Success, output of length @outlenp stored in the buffer at @out + * -ENODEV Hardware unavailable + * -ENOSPC Output buffer is to small + * -EMSGSIZE Input buffer too large + * -EINVAL buffer constraints do not fix nx842_constraints + * -EPROTO hardware error during operation + * -ETIMEDOUT hardware did not complete operation in reasonable time + * -EINTR operation was aborted + */ +static int nx842_powernv_function(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *workmem, int fc) +{ + struct coprocessor_request_block *crb; + struct coprocessor_status_block *csb; + struct nx842_workmem *wmem; + int ret; + u64 csb_addr; + u32 ccw; + unsigned int outlen = *outlenp; + + wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN); + + *outlenp = 0; + + /* shoudn't happen, we don't load without a coproc */ + if (!nx842_ct) { + pr_err_ratelimited("coprocessor CT is 0"); + return -ENODEV; + } + + crb = &wmem->crb; + csb = &crb->csb; + + /* Clear any previous values */ + memset(crb, 0, sizeof(*crb)); + + /* set up DDLs */ + ret = setup_ddl(&crb->source, wmem->ddl_in, + (unsigned char *)in, inlen, true); + if (ret) + return ret; + ret = setup_ddl(&crb->target, wmem->ddl_out, + out, outlen, false); + if (ret) + return ret; + + /* set up CCW */ + ccw = 0; + ccw = SET_FIELD(ccw, CCW_CT, nx842_ct); + ccw = SET_FIELD(ccw, CCW_CI_842, 0); /* use 0 for hw auto-selection */ + ccw = SET_FIELD(ccw, CCW_FC_842, fc); + + /* set up CRB's CSB addr */ + csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS; + csb_addr |= CRB_CSB_AT; /* Addrs are phys */ + crb->csb_addr = cpu_to_be64(csb_addr); + + wmem->start = ktime_get(); + + /* do ICSWX */ + ret = icswx(cpu_to_be32(ccw), crb); + + pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret, + (unsigned int)ccw, + (unsigned int)be32_to_cpu(crb->ccw)); + + switch (ret) { + case ICSWX_INITIATED: + ret = wait_for_csb(wmem, csb); + break; + case ICSWX_BUSY: + pr_debug_ratelimited("842 Coprocessor busy\n"); + ret = -EBUSY; + break; + case ICSWX_REJECTED: + pr_err_ratelimited("ICSWX rejected\n"); + ret = -EPROTO; + break; + default: + pr_err_ratelimited("Invalid ICSWX return code %x\n", ret); + ret = -EPROTO; + break; + } + + if (!ret) + *outlenp = be32_to_cpu(csb->count); + + return ret; +} + +/** + * nx842_powernv_compress - Compress data using the 842 algorithm + * + * Compression provided by the NX842 coprocessor on IBM PowerNV systems. + * The input buffer is compressed and the result is stored in the + * provided output buffer. + * + * Upon return from this function @outlen contains the length of the + * compressed data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * + * Returns: see @nx842_powernv_function() + */ +static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *wmem) +{ + return nx842_powernv_function(in, inlen, out, outlenp, + wmem, CCW_FC_842_COMP_NOCRC); +} + +/** + * nx842_powernv_decompress - Decompress data using the 842 algorithm + * + * Decompression provided by the NX842 coprocessor on IBM PowerNV systems. + * The input buffer is decompressed and the result is stored in the + * provided output buffer. + * + * Upon return from this function @outlen contains the length of the + * decompressed data. If there is an error then @outlen will be 0 and an + * error will be specified by the return code from this function. + * + * @in: input buffer pointer + * @inlen: input buffer size + * @out: output buffer pointer + * @outlenp: output buffer size pointer + * @workmem: working memory buffer pointer, size determined by + * nx842_powernv_driver.workmem_size + * + * Returns: see @nx842_powernv_function() + */ +static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen, + unsigned char *out, unsigned int *outlenp, + void *wmem) +{ + return nx842_powernv_function(in, inlen, out, outlenp, + wmem, CCW_FC_842_DECOMP_NOCRC); +} + +static int __init nx842_powernv_probe(struct device_node *dn) +{ + struct nx842_coproc *coproc; + struct property *ct_prop, *ci_prop; + unsigned int ct, ci; + int chip_id; + + chip_id = of_get_ibm_chip_id(dn); + if (chip_id < 0) { + pr_err("ibm,chip-id missing\n"); + return -EINVAL; + } + ct_prop = of_find_property(dn, "ibm,842-coprocessor-type", NULL); + if (!ct_prop) { + pr_err("ibm,842-coprocessor-type missing\n"); + return -EINVAL; + } + ct = be32_to_cpu(*(unsigned int *)ct_prop->value); + ci_prop = of_find_property(dn, "ibm,842-coprocessor-instance", NULL); + if (!ci_prop) { + pr_err("ibm,842-coprocessor-instance missing\n"); + return -EINVAL; + } + ci = be32_to_cpu(*(unsigned int *)ci_prop->value); + + coproc = kmalloc(sizeof(*coproc), GFP_KERNEL); + if (!coproc) + return -ENOMEM; + + coproc->chip_id = chip_id; + coproc->ct = ct; + coproc->ci = ci; + INIT_LIST_HEAD(&coproc->list); + list_add(&coproc->list, &nx842_coprocs); + + pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci); + + if (!nx842_ct) + nx842_ct = ct; + else if (nx842_ct != ct) + pr_err("NX842 chip %d, CT %d != first found CT %d\n", + chip_id, ct, nx842_ct); + + return 0; +} + +static struct nx842_constraints nx842_powernv_constraints = { + .alignment = DDE_BUFFER_ALIGN, + .multiple = DDE_BUFFER_LAST_MULT, + .minimum = DDE_BUFFER_LAST_MULT, + .maximum = (DDL_LEN_MAX - 1) * PAGE_SIZE, +}; + +static struct nx842_driver nx842_powernv_driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .workmem_size = sizeof(struct nx842_workmem), + .constraints = &nx842_powernv_constraints, + .compress = nx842_powernv_compress, + .decompress = nx842_powernv_decompress, +}; + +static __init int nx842_powernv_init(void) +{ + struct device_node *dn; + + /* verify workmem size/align restrictions */ + BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN); + BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN); + BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN); + /* verify buffer size/align restrictions */ + BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN); + BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT); + BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT); + + pr_info("loading\n"); + + for_each_compatible_node(dn, NULL, "ibm,power-nx") + nx842_powernv_probe(dn); + + if (!nx842_ct) { + pr_err("no coprocessors found\n"); + return -ENODEV; + } + + if (!nx842_platform_driver_set(&nx842_powernv_driver)) { + struct nx842_coproc *coproc, *n; + + list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) { + list_del(&coproc->list); + kfree(coproc); + } + + return -EEXIST; + } + + pr_info("loaded\n"); + + return 0; +} +module_init(nx842_powernv_init); + +static void __exit nx842_powernv_exit(void) +{ + struct nx842_coproc *coproc, *n; + + nx842_platform_driver_unset(&nx842_powernv_driver); + + list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) { + list_del(&coproc->list); + kfree(coproc); + } + + pr_info("unloaded\n"); +} +module_exit(nx842_powernv_exit); |