diff options
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
| -rw-r--r-- | drivers/dma/amba-pl08x.c | 41 |
1 files changed, 22 insertions, 19 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 0698695e8bf9..8a281584458b 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -854,8 +854,10 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, int ret; /* Check if we already have a channel */ - if (plchan->phychan) - return 0; + if (plchan->phychan) { + ch = plchan->phychan; + goto got_channel; + } ch = pl08x_get_phy_channel(pl08x, plchan); if (!ch) { @@ -880,21 +882,22 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, return -EBUSY; } ch->signal = ret; - - /* Assign the flow control signal to this channel */ - if (txd->direction == DMA_TO_DEVICE) - txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; - else if (txd->direction == DMA_FROM_DEVICE) - txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; } + plchan->phychan = ch; dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", ch->id, ch->signal, plchan->name); +got_channel: + /* Assign the flow control signal to this channel */ + if (txd->direction == DMA_MEM_TO_DEV) + txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; + else if (txd->direction == DMA_DEV_TO_MEM) + txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; + plchan->phychan_hold++; - plchan->phychan = ch; return 0; } @@ -1102,10 +1105,10 @@ static int dma_set_runtime_config(struct dma_chan *chan, /* Transfer direction */ plchan->runtime_direction = config->direction; - if (config->direction == DMA_TO_DEVICE) { + if (config->direction == DMA_MEM_TO_DEV) { addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; - } else if (config->direction == DMA_FROM_DEVICE) { + } else if (config->direction == DMA_DEV_TO_MEM) { addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { @@ -1136,7 +1139,7 @@ static int dma_set_runtime_config(struct dma_chan *chan, cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; - if (plchan->runtime_direction == DMA_FROM_DEVICE) { + if (plchan->runtime_direction == DMA_DEV_TO_MEM) { plchan->src_addr = config->src_addr; plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | pl08x_select_bus(plchan->cd->periph_buses, @@ -1152,7 +1155,7 @@ static int dma_set_runtime_config(struct dma_chan *chan, "configured channel %s (%s) for %s, data width %d, " "maxburst %d words, LE, CCTL=0x%08x\n", dma_chan_name(chan), plchan->name, - (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", + (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", addr_width, maxburst, cctl); @@ -1322,7 +1325,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, - unsigned int sg_len, enum dma_data_direction direction, + unsigned int sg_len, enum dma_transfer_direction direction, unsigned long flags) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); @@ -1354,10 +1357,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( */ txd->direction = direction; - if (direction == DMA_TO_DEVICE) { + if (direction == DMA_MEM_TO_DEV) { txd->cctl = plchan->dst_cctl; slave_addr = plchan->dst_addr; - } else if (direction == DMA_FROM_DEVICE) { + } else if (direction == DMA_DEV_TO_MEM) { txd->cctl = plchan->src_cctl; slave_addr = plchan->src_addr; } else { @@ -1368,10 +1371,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( } if (plchan->cd->device_fc) - tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER : + tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : PL080_FLOW_PER2MEM_PER; else - tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER : + tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER : PL080_FLOW_PER2MEM; txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; @@ -1387,7 +1390,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( list_add_tail(&dsg->node, &txd->dsg_list); dsg->len = sg_dma_len(sg); - if (direction == DMA_TO_DEVICE) { + if (direction == DMA_MEM_TO_DEV) { dsg->src_addr = sg_phys(sg); dsg->dst_addr = slave_addr; } else { |