diff options
Diffstat (limited to 'drivers/dma/ipu/ipu_irq.c')
-rw-r--r-- | drivers/dma/ipu/ipu_irq.c | 367 |
1 files changed, 0 insertions, 367 deletions
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c deleted file mode 100644 index 97d9a6f04f2a..000000000000 --- a/drivers/dma/ipu/ipu_irq.c +++ /dev/null @@ -1,367 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - */ - -#include <linux/init.h> -#include <linux/err.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/dma/ipu-dma.h> - -#include "ipu_intern.h" - -/* - * Register read / write - shall be inlined by the compiler - */ -static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg) -{ - return __raw_readl(ipu->reg_ipu + reg); -} - -static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg) -{ - __raw_writel(value, ipu->reg_ipu + reg); -} - - -/* - * IPU IRQ chip driver - */ - -#define IPU_IRQ_NR_FN_BANKS 3 -#define IPU_IRQ_NR_ERR_BANKS 2 -#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS) - -struct ipu_irq_bank { - unsigned int control; - unsigned int status; - struct ipu *ipu; -}; - -static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = { - /* 3 groups of functional interrupts */ - { - .control = IPU_INT_CTRL_1, - .status = IPU_INT_STAT_1, - }, { - .control = IPU_INT_CTRL_2, - .status = IPU_INT_STAT_2, - }, { - .control = IPU_INT_CTRL_3, - .status = IPU_INT_STAT_3, - }, - /* 2 groups of error interrupts */ - { - .control = IPU_INT_CTRL_4, - .status = IPU_INT_STAT_4, - }, { - .control = IPU_INT_CTRL_5, - .status = IPU_INT_STAT_5, - }, -}; - -struct ipu_irq_map { - unsigned int irq; - int source; - struct ipu_irq_bank *bank; - struct ipu *ipu; -}; - -static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS]; -/* Protects allocations from the above array of maps */ -static DEFINE_MUTEX(map_lock); -/* Protects register accesses and individual mappings */ -static DEFINE_RAW_SPINLOCK(bank_lock); - -static struct ipu_irq_map *src2map(unsigned int src) -{ - int i; - - for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) - if (irq_map[i].source == src) - return irq_map + i; - - return NULL; -} - -static void ipu_irq_unmask(struct irq_data *d) -{ - struct ipu_irq_map *map = irq_data_get_irq_chip_data(d); - struct ipu_irq_bank *bank; - uint32_t reg; - unsigned long lock_flags; - - raw_spin_lock_irqsave(&bank_lock, lock_flags); - - bank = map->bank; - if (!bank) { - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); - pr_err("IPU: %s(%u) - unmapped!\n", __func__, d->irq); - return; - } - - reg = ipu_read_reg(bank->ipu, bank->control); - reg |= (1UL << (map->source & 31)); - ipu_write_reg(bank->ipu, reg, bank->control); - - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); -} - -static void ipu_irq_mask(struct irq_data *d) -{ - struct ipu_irq_map *map = irq_data_get_irq_chip_data(d); - struct ipu_irq_bank *bank; - uint32_t reg; - unsigned long lock_flags; - - raw_spin_lock_irqsave(&bank_lock, lock_flags); - - bank = map->bank; - if (!bank) { - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); - pr_err("IPU: %s(%u) - unmapped!\n", __func__, d->irq); - return; - } - - reg = ipu_read_reg(bank->ipu, bank->control); - reg &= ~(1UL << (map->source & 31)); - ipu_write_reg(bank->ipu, reg, bank->control); - - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); -} - -static void ipu_irq_ack(struct irq_data *d) -{ - struct ipu_irq_map *map = irq_data_get_irq_chip_data(d); - struct ipu_irq_bank *bank; - unsigned long lock_flags; - - raw_spin_lock_irqsave(&bank_lock, lock_flags); - - bank = map->bank; - if (!bank) { - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); - pr_err("IPU: %s(%u) - unmapped!\n", __func__, d->irq); - return; - } - - ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status); - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); -} - -/** - * ipu_irq_status() - returns the current interrupt status of the specified IRQ. - * @irq: interrupt line to get status for. - * @return: true if the interrupt is pending/asserted or false if the - * interrupt is not pending. - */ -bool ipu_irq_status(unsigned int irq) -{ - struct ipu_irq_map *map = irq_get_chip_data(irq); - struct ipu_irq_bank *bank; - unsigned long lock_flags; - bool ret; - - raw_spin_lock_irqsave(&bank_lock, lock_flags); - bank = map->bank; - ret = bank && ipu_read_reg(bank->ipu, bank->status) & - (1UL << (map->source & 31)); - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); - - return ret; -} - -/** - * ipu_irq_map() - map an IPU interrupt source to an IRQ number - * @source: interrupt source bit position (see below) - * @return: mapped IRQ number or negative error code - * - * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ - * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17. - * However, the source argument of this function is not the sequence number of - * the possible IRQ, but rather its bit position. So, first interrupt in fourth - * register has source number 96, and not 88. This makes calculations easier, - * and also provides forward compatibility with any future IPU implementations - * with any interrupt bit assignments. - */ -int ipu_irq_map(unsigned int source) -{ - int i, ret = -ENOMEM; - struct ipu_irq_map *map; - - might_sleep(); - - mutex_lock(&map_lock); - map = src2map(source); - if (map) { - pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq); - ret = -EBUSY; - goto out; - } - - for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { - if (irq_map[i].source < 0) { - unsigned long lock_flags; - - raw_spin_lock_irqsave(&bank_lock, lock_flags); - irq_map[i].source = source; - irq_map[i].bank = irq_bank + source / 32; - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); - - ret = irq_map[i].irq; - pr_debug("IPU: mapped source %u to IRQ %u\n", - source, ret); - break; - } - } -out: - mutex_unlock(&map_lock); - - if (ret < 0) - pr_err("IPU: couldn't map source %u: %d\n", source, ret); - - return ret; -} - -/** - * ipu_irq_unmap() - unmap an IPU interrupt source - * @source: interrupt source bit position (see ipu_irq_map()) - * @return: 0 or negative error code - */ -int ipu_irq_unmap(unsigned int source) -{ - int i, ret = -EINVAL; - - might_sleep(); - - mutex_lock(&map_lock); - for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { - if (irq_map[i].source == source) { - unsigned long lock_flags; - - pr_debug("IPU: unmapped source %u from IRQ %u\n", - source, irq_map[i].irq); - - raw_spin_lock_irqsave(&bank_lock, lock_flags); - irq_map[i].source = -EINVAL; - irq_map[i].bank = NULL; - raw_spin_unlock_irqrestore(&bank_lock, lock_flags); - - ret = 0; - break; - } - } - mutex_unlock(&map_lock); - - return ret; -} - -/* Chained IRQ handler for IPU function and error interrupt */ -static void ipu_irq_handler(struct irq_desc *desc) -{ - struct ipu *ipu = irq_desc_get_handler_data(desc); - u32 status; - int i, line; - - for (i = 0; i < IPU_IRQ_NR_BANKS; i++) { - struct ipu_irq_bank *bank = irq_bank + i; - - raw_spin_lock(&bank_lock); - status = ipu_read_reg(ipu, bank->status); - /* - * Don't think we have to clear all interrupts here, they will - * be acked by ->handle_irq() (handle_level_irq). However, we - * might want to clear unhandled interrupts after the loop... - */ - status &= ipu_read_reg(ipu, bank->control); - raw_spin_unlock(&bank_lock); - while ((line = ffs(status))) { - struct ipu_irq_map *map; - unsigned int irq; - - line--; - status &= ~(1UL << line); - - raw_spin_lock(&bank_lock); - map = src2map(32 * i + line); - if (!map) { - raw_spin_unlock(&bank_lock); - pr_err("IPU: Interrupt on unmapped source %u bank %d\n", - line, i); - continue; - } - irq = map->irq; - raw_spin_unlock(&bank_lock); - generic_handle_irq(irq); - } - } -} - -static struct irq_chip ipu_irq_chip = { - .name = "ipu_irq", - .irq_ack = ipu_irq_ack, - .irq_mask = ipu_irq_mask, - .irq_unmask = ipu_irq_unmask, -}; - -/* Install the IRQ handler */ -int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev) -{ - unsigned int irq, i; - int irq_base = irq_alloc_descs(-1, 0, CONFIG_MX3_IPU_IRQS, - numa_node_id()); - - if (irq_base < 0) - return irq_base; - - for (i = 0; i < IPU_IRQ_NR_BANKS; i++) - irq_bank[i].ipu = ipu; - - for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { - int ret; - - irq = irq_base + i; - ret = irq_set_chip(irq, &ipu_irq_chip); - if (ret < 0) - return ret; - ret = irq_set_chip_data(irq, irq_map + i); - if (ret < 0) - return ret; - irq_map[i].ipu = ipu; - irq_map[i].irq = irq; - irq_map[i].source = -EINVAL; - irq_set_handler(irq, handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } - - irq_set_chained_handler_and_data(ipu->irq_fn, ipu_irq_handler, ipu); - - irq_set_chained_handler_and_data(ipu->irq_err, ipu_irq_handler, ipu); - - ipu->irq_base = irq_base; - - return 0; -} - -void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev) -{ - unsigned int irq, irq_base; - - irq_base = ipu->irq_base; - - irq_set_chained_handler_and_data(ipu->irq_fn, NULL, NULL); - - irq_set_chained_handler_and_data(ipu->irq_err, NULL, NULL); - - for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) { - irq_set_status_flags(irq, IRQ_NOREQUEST); - irq_set_chip(irq, NULL); - irq_set_chip_data(irq, NULL); - } -} |