diff options
Diffstat (limited to 'drivers/edac/edac_pci_sysfs.c')
| -rw-r--r-- | drivers/edac/edac_pci_sysfs.c | 361 |
1 files changed, 361 insertions, 0 deletions
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c new file mode 100644 index 000000000000..db23fec522e2 --- /dev/null +++ b/drivers/edac/edac_pci_sysfs.c @@ -0,0 +1,361 @@ +/* edac_mc kernel module + * (C) 2005, 2006 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written Doug Thompson <norsk5@xmission.com> + * + */ +#include <linux/module.h> +#include <linux/sysdev.h> +#include <linux/ctype.h> + +#include "edac_mc.h" +#include "edac_module.h" + + +#ifdef CONFIG_PCI +static int check_pci_parity = 0; /* default YES check PCI parity */ +static int panic_on_pci_parity; /* default no panic on PCI Parity */ +static atomic_t pci_parity_count = ATOMIC_INIT(0); + +static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */ +static struct completion edac_pci_kobj_complete; + + +static ssize_t edac_pci_int_show(void *ptr, char *buffer) +{ + int *value = ptr; + return sprintf(buffer,"%d\n",*value); +} + +static ssize_t edac_pci_int_store(void *ptr, const char *buffer, size_t count) +{ + int *value = ptr; + + if (isdigit(*buffer)) + *value = simple_strtoul(buffer,NULL,0); + + return count; +} + +struct edac_pci_dev_attribute { + struct attribute attr; + void *value; + ssize_t (*show)(void *,char *); + ssize_t (*store)(void *, const char *,size_t); +}; + +/* Set of show/store abstract level functions for PCI Parity object */ +static ssize_t edac_pci_dev_show(struct kobject *kobj, struct attribute *attr, + char *buffer) +{ + struct edac_pci_dev_attribute *edac_pci_dev; + edac_pci_dev= (struct edac_pci_dev_attribute*)attr; + + if (edac_pci_dev->show) + return edac_pci_dev->show(edac_pci_dev->value, buffer); + return -EIO; +} + +static ssize_t edac_pci_dev_store(struct kobject *kobj, + struct attribute *attr, const char *buffer, size_t count) +{ + struct edac_pci_dev_attribute *edac_pci_dev; + edac_pci_dev= (struct edac_pci_dev_attribute*)attr; + + if (edac_pci_dev->show) + return edac_pci_dev->store(edac_pci_dev->value, buffer, count); + return -EIO; +} + +static struct sysfs_ops edac_pci_sysfs_ops = { + .show = edac_pci_dev_show, + .store = edac_pci_dev_store +}; + +#define EDAC_PCI_ATTR(_name,_mode,_show,_store) \ +static struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .value = &_name, \ + .show = _show, \ + .store = _store, \ +}; + +#define EDAC_PCI_STRING_ATTR(_name,_data,_mode,_show,_store) \ +static struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .value = _data, \ + .show = _show, \ + .store = _store, \ +}; + +/* PCI Parity control files */ +EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show, + edac_pci_int_store); +EDAC_PCI_ATTR(panic_on_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show, + edac_pci_int_store); +EDAC_PCI_ATTR(pci_parity_count, S_IRUGO, edac_pci_int_show, NULL); + +/* Base Attributes of the memory ECC object */ +static struct edac_pci_dev_attribute *edac_pci_attr[] = { + &edac_pci_attr_check_pci_parity, + &edac_pci_attr_panic_on_pci_parity, + &edac_pci_attr_pci_parity_count, + NULL, +}; + +/* No memory to release */ +static void edac_pci_release(struct kobject *kobj) +{ + debugf1("%s()\n", __func__); + complete(&edac_pci_kobj_complete); +} + +static struct kobj_type ktype_edac_pci = { + .release = edac_pci_release, + .sysfs_ops = &edac_pci_sysfs_ops, + .default_attrs = (struct attribute **) edac_pci_attr, +}; + +/** + * edac_sysfs_pci_setup() + * + * setup the sysfs for EDAC PCI attributes + * assumes edac_class has already been initialized + */ +int edac_sysfs_pci_setup(void) +{ + int err; + struct sysdev_class *edac_class; + + debugf1("%s()\n", __func__); + + edac_class = edac_get_edac_class(); + + memset(&edac_pci_kobj, 0, sizeof(edac_pci_kobj)); + edac_pci_kobj.parent = &edac_class->kset.kobj; + edac_pci_kobj.ktype = &ktype_edac_pci; + err = kobject_set_name(&edac_pci_kobj, "pci"); + + if (!err) { + /* Instanstiate the pci object */ + /* FIXME: maybe new sysdev_create_subdir() */ + err = kobject_register(&edac_pci_kobj); + + if (err) + debugf1("Failed to register '.../edac/pci'\n"); + else + debugf1("Registered '.../edac/pci' kobject\n"); + } + + return err; +} + +/* + * edac_sysfs_pci_teardown + * + * perform the sysfs teardown for the PCI attributes + */ +void edac_sysfs_pci_teardown(void) +{ + debugf0("%s()\n", __func__); + init_completion(&edac_pci_kobj_complete); + kobject_unregister(&edac_pci_kobj); + wait_for_completion(&edac_pci_kobj_complete); +} + + +static u16 get_pci_parity_status(struct pci_dev *dev, int secondary) +{ + int where; + u16 status; + + where = secondary ? PCI_SEC_STATUS : PCI_STATUS; + pci_read_config_word(dev, where, &status); + + /* If we get back 0xFFFF then we must suspect that the card has been + * pulled but the Linux PCI layer has not yet finished cleaning up. + * We don't want to report on such devices + */ + + if (status == 0xFFFF) { + u32 sanity; + + pci_read_config_dword(dev, 0, &sanity); + + if (sanity == 0xFFFFFFFF) + return 0; + } + + status &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | + PCI_STATUS_PARITY; + + if (status) + /* reset only the bits we are interested in */ + pci_write_config_word(dev, where, status); + + return status; +} + +typedef void (*pci_parity_check_fn_t) (struct pci_dev *dev); + +/* Clear any PCI parity errors logged by this device. */ +static void edac_pci_dev_parity_clear(struct pci_dev *dev) +{ + u8 header_type; + + get_pci_parity_status(dev, 0); + + /* read the device TYPE, looking for bridges */ + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) + get_pci_parity_status(dev, 1); +} + +/* + * PCI Parity polling + * + */ +static void edac_pci_dev_parity_test(struct pci_dev *dev) +{ + u16 status; + u8 header_type; + + /* read the STATUS register on this device + */ + status = get_pci_parity_status(dev, 0); + + debugf2("PCI STATUS= 0x%04x %s\n", status, dev->dev.bus_id ); + + /* check the status reg for errors */ + if (status) { + if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) + edac_printk(KERN_CRIT, EDAC_PCI, + "Signaled System Error on %s\n", + pci_name(dev)); + + if (status & (PCI_STATUS_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, + "Master Data Parity Error on %s\n", + pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + + if (status & (PCI_STATUS_DETECTED_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, + "Detected Parity Error on %s\n", + pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + } + + /* read the device TYPE, looking for bridges */ + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + + debugf2("PCI HEADER TYPE= 0x%02x %s\n", header_type, dev->dev.bus_id ); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* On bridges, need to examine secondary status register */ + status = get_pci_parity_status(dev, 1); + + debugf2("PCI SEC_STATUS= 0x%04x %s\n", + status, dev->dev.bus_id ); + + /* check the secondary status reg for errors */ + if (status) { + if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) + edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " + "Signaled System Error on %s\n", + pci_name(dev)); + + if (status & (PCI_STATUS_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " + "Master Data Parity Error on " + "%s\n", pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + + if (status & (PCI_STATUS_DETECTED_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " + "Detected Parity Error on %s\n", + pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + } + } +} + +/* + * pci_dev parity list iterator + * Scan the PCI device list for one iteration, looking for SERRORs + * Master Parity ERRORS or Parity ERRORs on primary or secondary devices + */ +static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn) +{ + struct pci_dev *dev = NULL; + + /* request for kernel access to the next PCI device, if any, + * and while we are looking at it have its reference count + * bumped until we are done with it + */ + while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + fn(dev); + } +} + +/* + * edac_pci_do_parity_check + * + * performs the actual PCI parity check operation + */ +void edac_pci_do_parity_check(void) +{ + unsigned long flags; + int before_count; + + debugf3("%s()\n", __func__); + + if (!check_pci_parity) + return; + + before_count = atomic_read(&pci_parity_count); + + /* scan all PCI devices looking for a Parity Error on devices and + * bridges + */ + local_irq_save(flags); + edac_pci_dev_parity_iterator(edac_pci_dev_parity_test); + local_irq_restore(flags); + + /* Only if operator has selected panic on PCI Error */ + if (panic_on_pci_parity) { + /* If the count is different 'after' from 'before' */ + if (before_count != atomic_read(&pci_parity_count)) + panic("EDAC: PCI Parity Error"); + } +} + +void edac_pci_clear_parity_errors(void) +{ + /* Clear any PCI bus parity errors that devices initially have logged + * in their registers. + */ + edac_pci_dev_parity_iterator(edac_pci_dev_parity_clear); +} + + +/* + * Define the PCI parameter to the module + */ +module_param(check_pci_parity, int, 0644); +MODULE_PARM_DESC(check_pci_parity, "Check for PCI bus parity errors: 0=off 1=on"); +module_param(panic_on_pci_parity, int, 0644); +MODULE_PARM_DESC(panic_on_pci_parity, "Panic on PCI Bus Parity error: 0=off 1=on"); + +#endif /* CONFIG_PCI */ |