1 files changed, 15 insertions, 17 deletions

diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index 445c9ff27b88..872c3b928035 100644
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -205,7 +205,7 @@ static void r82600_check(struct mem_ctl_info *mci)
 {
 	struct r82600_error_info info;
 
-	debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+	debugf1("MC%d\n", mci->mc_idx);
 	r82600_get_error_info(mci, &info);
 	r82600_process_error_info(mci, &info, 1);
 }
@@ -236,13 +236,13 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
 		/* find the DRAM Chip Select Base address and mask */
 		pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
 
-		debugf1("%s() Row=%d DRBA = %#0x\n", __func__, index, drbar);
+		debugf1("Row=%d DRBA = %#0x\n", index, drbar);
 
 		row_high_limit = ((u32) drbar << 24);
 /*		row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
 
-		debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n",
-			__func__, index, row_high_limit, row_high_limit_last);
+		debugf1("Row=%d, Boundary Address=%#0x, Last = %#0x\n",
+			index, row_high_limit, row_high_limit_last);
 
 		/* Empty row [p.57] */
 		if (row_high_limit == row_high_limit_last)
@@ -277,14 +277,13 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
 	u32 sdram_refresh_rate;
 	struct r82600_error_info discard;
 
-	debugf0("%s()\n", __func__);
+	debugf0("\n");
 	pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
 	pci_read_config_dword(pdev, R82600_EAP, &eapr);
 	scrub_disabled = eapr & BIT(31);
 	sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
-	debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
-		sdram_refresh_rate);
-	debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
+	debugf2("sdram refresh rate = %#0x\n", sdram_refresh_rate);
+	debugf2("DRAMC register = %#0x\n", dramcr);
 	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
 	layers[0].size = R82600_NR_CSROWS;
 	layers[0].is_virt_csrow = true;
@@ -295,7 +294,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
 	if (mci == NULL)
 		return -ENOMEM;
 
-	debugf0("%s(): mci = %p\n", __func__, mci);
+	debugf0("mci = %p\n", mci);
 	mci->pdev = &pdev->dev;
 	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
@@ -311,8 +310,8 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
 
 	if (ecc_enabled(dramcr)) {
 		if (scrub_disabled)
-			debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
-				"%#0x\n", __func__, mci, eapr);
+			debugf3("mci = %p - Scrubbing disabled! EAP: "
+				"%#0x\n", mci, eapr);
 	} else
 		mci->edac_cap = EDAC_FLAG_NONE;
 
@@ -329,15 +328,14 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
 	 * type of memory controller.  The ID is therefore hardcoded to 0.
 	 */
 	if (edac_mc_add_mc(mci)) {
-		debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+		debugf3("failed edac_mc_add_mc()\n");
 		goto fail;
 	}
 
 	/* get this far and it's successful */
 
 	if (disable_hardware_scrub) {
-		debugf3("%s(): Disabling Hardware Scrub (scrub on error)\n",
-			__func__);
+		debugf3("Disabling Hardware Scrub (scrub on error)\n");
 		pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31));
 	}
 
@@ -352,7 +350,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
 			__func__);
 	}
 
-	debugf3("%s(): success\n", __func__);
+	debugf3("success\n");
 	return 0;
 
 fail:
@@ -364,7 +362,7 @@ fail:
 static int __devinit r82600_init_one(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
-	debugf0("%s()\n", __func__);
+	debugf0("\n");
 
 	/* don't need to call pci_enable_device() */
 	return r82600_probe1(pdev, ent->driver_data);
@@ -374,7 +372,7 @@ static void __devexit r82600_remove_one(struct pci_dev *pdev)
 {
 	struct mem_ctl_info *mci;
 
-	debugf0("%s()\n", __func__);
+	debugf0("\n");
 
 	if (r82600_pci)
 		edac_pci_release_generic_ctl(r82600_pci);