summaryrefslogtreecommitdiffstats
path: root/drivers/extcon/extcon-arizona.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/extcon/extcon-arizona.c')
-rw-r--r--drivers/extcon/extcon-arizona.c85
1 files changed, 53 insertions, 32 deletions
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index a287cece0593..98a14f6143a7 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -44,6 +44,15 @@
#define HPDET_DEBOUNCE 500
#define DEFAULT_MICD_TIMEOUT 2000
+#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
+ ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
+ ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
+ ARIZONA_MICD_LVL_7)
+
+#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
+
+#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
+
struct arizona_extcon_info {
struct device *dev;
struct arizona *arizona;
@@ -213,27 +222,19 @@ static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
struct snd_soc_dapm_context *dapm = arizona->dapm;
int ret;
- mutex_lock(&dapm->card->dapm_mutex);
-
ret = snd_soc_dapm_force_enable_pin(dapm, widget);
if (ret != 0)
dev_warn(arizona->dev, "Failed to enable %s: %d\n",
widget, ret);
- mutex_unlock(&dapm->card->dapm_mutex);
-
snd_soc_dapm_sync(dapm);
if (!arizona->pdata.micd_force_micbias) {
- mutex_lock(&dapm->card->dapm_mutex);
-
ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
if (ret != 0)
dev_warn(arizona->dev, "Failed to disable %s: %d\n",
widget, ret);
- mutex_unlock(&dapm->card->dapm_mutex);
-
snd_soc_dapm_sync(dapm);
}
}
@@ -295,16 +296,12 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
ARIZONA_MICD_ENA, 0,
&change);
- mutex_lock(&dapm->card->dapm_mutex);
-
ret = snd_soc_dapm_disable_pin(dapm, widget);
if (ret != 0)
dev_warn(arizona->dev,
"Failed to disable %s: %d\n",
widget, ret);
- mutex_unlock(&dapm->card->dapm_mutex);
-
snd_soc_dapm_sync(dapm);
if (info->micd_reva) {
@@ -426,26 +423,15 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
}
val &= ARIZONA_HP_LVL_B_MASK;
+ /* Convert to ohms, the value is in 0.5 ohm increments */
+ val /= 2;
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
- /* Skip up or down a range? */
- if (range && (val < arizona_hpdet_c_ranges[range].min)) {
- range--;
- dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
- arizona_hpdet_c_ranges[range].min,
- arizona_hpdet_c_ranges[range].max);
- regmap_update_bits(arizona->regmap,
- ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_IMPEDANCE_RANGE_MASK,
- range <<
- ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
- return -EAGAIN;
- }
-
+ /* Skip up a range, or report? */
if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
(val >= arizona_hpdet_c_ranges[range].max)) {
range++;
@@ -459,6 +445,12 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
+
+ if (range && (val < arizona_hpdet_c_ranges[range].min)) {
+ dev_dbg(arizona->dev, "Reporting range boundary %d\n",
+ arizona_hpdet_c_ranges[range].min);
+ val = arizona_hpdet_c_ranges[range].min;
+ }
}
dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
@@ -594,9 +586,15 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
+done:
+ /* Reset back to starting range */
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
+ 0);
+
arizona_extcon_do_magic(info, 0);
-done:
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
@@ -765,7 +763,20 @@ static void arizona_micd_detect(struct work_struct *work)
mutex_lock(&info->lock);
- for (i = 0; i < 10 && !(val & 0x7fc); i++) {
+ /* If the cable was removed while measuring ignore the result */
+ ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
+ if (ret < 0) {
+ dev_err(arizona->dev, "Failed to check cable state: %d\n",
+ ret);
+ mutex_unlock(&info->lock);
+ return;
+ } else if (!ret) {
+ dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
+ mutex_unlock(&info->lock);
+ return;
+ }
+
+ for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
if (ret != 0) {
dev_err(arizona->dev,
@@ -784,7 +795,7 @@ static void arizona_micd_detect(struct work_struct *work)
}
}
- if (i == 10 && !(val & 0x7fc)) {
+ if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
dev_err(arizona->dev, "Failed to get valid MICDET value\n");
mutex_unlock(&info->lock);
return;
@@ -798,7 +809,7 @@ static void arizona_micd_detect(struct work_struct *work)
}
/* If we got a high impedence we should have a headset, report it. */
- if (info->detecting && (val & 0x400)) {
+ if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
arizona_identify_headphone(info);
ret = extcon_update_state(&info->edev,
@@ -827,7 +838,7 @@ static void arizona_micd_detect(struct work_struct *work)
* plain headphones. If both polarities report a low
* impedence then give up and report headphones.
*/
- if (info->detecting && (val & 0x3f8)) {
+ if (info->detecting && (val & MICD_LVL_1_TO_7)) {
if (info->jack_flips >= info->micd_num_modes * 10) {
dev_dbg(arizona->dev, "Detected HP/line\n");
arizona_identify_headphone(info);
@@ -851,7 +862,7 @@ static void arizona_micd_detect(struct work_struct *work)
* If we're still detecting and we detect a short then we've
* got a headphone. Otherwise it's a button press.
*/
- if (val & 0x3fc) {
+ if (val & MICD_LVL_0_TO_7) {
if (info->mic) {
dev_dbg(arizona->dev, "Mic button detected\n");
@@ -1126,6 +1137,16 @@ static int arizona_extcon_probe(struct platform_device *pdev)
break;
}
break;
+ case WM5110:
+ switch (arizona->rev) {
+ case 0 ... 2:
+ break;
+ default:
+ info->micd_clamp = true;
+ info->hpdet_ip = 2;
+ break;
+ }
+ break;
default:
break;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 12:15:46 +0100