diff options
Diffstat (limited to 'drivers/firmware/ti_sci.h')
| -rw-r--r-- | drivers/firmware/ti_sci.h | 675 |
1 files changed, 675 insertions, 0 deletions
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h index 4983827151bf..2bb81ec7793c 100644 --- a/drivers/firmware/ti_sci.h +++ b/drivers/firmware/ti_sci.h @@ -42,6 +42,35 @@ #define TI_SCI_MSG_SET_IRQ 0x1000 #define TI_SCI_MSG_FREE_IRQ 0x1001 +/* NAVSS resource management */ +/* Ringacc requests */ +#define TI_SCI_MSG_RM_RING_ALLOCATE 0x1100 +#define TI_SCI_MSG_RM_RING_FREE 0x1101 +#define TI_SCI_MSG_RM_RING_RECONFIG 0x1102 +#define TI_SCI_MSG_RM_RING_RESET 0x1103 +#define TI_SCI_MSG_RM_RING_CFG 0x1110 +#define TI_SCI_MSG_RM_RING_GET_CFG 0x1111 + +/* PSI-L requests */ +#define TI_SCI_MSG_RM_PSIL_PAIR 0x1280 +#define TI_SCI_MSG_RM_PSIL_UNPAIR 0x1281 + +#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC 0x1200 +#define TI_SCI_MSG_RM_UDMAP_TX_FREE 0x1201 +#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC 0x1210 +#define TI_SCI_MSG_RM_UDMAP_RX_FREE 0x1211 +#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG 0x1220 +#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG 0x1221 + +#define TISCI_MSG_RM_UDMAP_TX_CH_CFG 0x1205 +#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG 0x1206 +#define TISCI_MSG_RM_UDMAP_RX_CH_CFG 0x1215 +#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG 0x1216 +#define TISCI_MSG_RM_UDMAP_FLOW_CFG 0x1230 +#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG 0x1231 +#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG 0x1232 +#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG 0x1233 + /** * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses * @type: Type of messages: One of TI_SCI_MSG* values @@ -563,4 +592,650 @@ struct ti_sci_msg_req_manage_irq { u8 secondary_host; } __packed; +/** + * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring + * + * Configures the non-real-time registers of a Navigator Subsystem ring. + * @hdr: Generic Header + * @valid_params: Bitfield defining validity of ring configuration parameters. + * The ring configuration fields are not valid, and will not be used for + * ring configuration, if their corresponding valid bit is zero. + * Valid bit usage: + * 0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo + * 1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi + * 2 - Valid bit for @tisci_msg_rm_ring_cfg_req count + * 3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode + * 4 - Valid bit for @tisci_msg_rm_ring_cfg_req size + * 5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id + * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated + * @index: ring index to be configured. + * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's + * RING_BA_LO register + * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's + * RING_BA_HI register. + * @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM + * modes. + * @mode: Specifies the mode the ring is to be configured. + * @size: Specifies encoded ring element size. To calculate the encoded size use + * the formula (log2(size_bytes) - 2), where size_bytes cannot be + * greater than 256. + * @order_id: Specifies the ring's bus order ID. + */ +struct ti_sci_msg_rm_ring_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 index; + u32 addr_lo; + u32 addr_hi; + u32 count; + u8 mode; + u8 size; + u8 order_id; +} __packed; + +/** + * struct ti_sci_msg_rm_ring_get_cfg_req - Get RA ring's configuration + * + * Gets the configuration of the non-real-time register fields of a ring. The + * host, or a supervisor of the host, who owns the ring must be the requesting + * host. The values of the non-real-time registers are returned in + * @ti_sci_msg_rm_ring_get_cfg_resp. + * + * @hdr: Generic Header + * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated + * @index: ring index. + */ +struct ti_sci_msg_rm_ring_get_cfg_req { + struct ti_sci_msg_hdr hdr; + u16 nav_id; + u16 index; +} __packed; + +/** + * struct ti_sci_msg_rm_ring_get_cfg_resp - Ring get configuration response + * + * Response received by host processor after RM has handled + * @ti_sci_msg_rm_ring_get_cfg_req. The response contains the ring's + * non-real-time register values. + * + * @hdr: Generic Header + * @addr_lo: Ring 32 LSBs of base address + * @addr_hi: Ring 16 MSBs of base address. + * @count: Ring number of elements. + * @mode: Ring mode. + * @size: encoded Ring element size + * @order_id: ing order ID. + */ +struct ti_sci_msg_rm_ring_get_cfg_resp { + struct ti_sci_msg_hdr hdr; + u32 addr_lo; + u32 addr_hi; + u32 count; + u8 mode; + u8 size; + u8 order_id; +} __packed; + +/** + * struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination + * thread + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is + * used to pair the source and destination threads. + * @src_thread: PSI-L source thread ID within the PSI-L System thread map. + * + * UDMAP transmit channels mapped to source threads will have their + * TCHAN_THRD_ID register programmed with the destination thread if the pairing + * is successful. + + * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map. + * PSI-L destination threads start at index 0x8000. The request is NACK'd if + * the destination thread is not greater than or equal to 0x8000. + * + * UDMAP receive channels mapped to destination threads will have their + * RCHAN_THRD_ID register programmed with the source thread if the pairing + * is successful. + * + * Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK + * message. + */ +struct ti_sci_msg_psil_pair { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 src_thread; + u32 dst_thread; +} __packed; + +/** + * struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a + * destination thread + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID whose PSI-L config proxy is + * used to unpair the source and destination threads. + * @src_thread: PSI-L source thread ID within the PSI-L System thread map. + * + * UDMAP transmit channels mapped to source threads will have their + * TCHAN_THRD_ID register cleared if the unpairing is successful. + * + * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map. + * PSI-L destination threads start at index 0x8000. The request is NACK'd if + * the destination thread is not greater than or equal to 0x8000. + * + * UDMAP receive channels mapped to destination threads will have their + * RCHAN_THRD_ID register cleared if the unpairing is successful. + * + * Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK + * message. + */ +struct ti_sci_msg_psil_unpair { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 src_thread; + u32 dst_thread; +} __packed; + +/** + * struct ti_sci_msg_udmap_rx_flow_cfg - UDMAP receive flow configuration + * message + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is + * allocated + * @flow_index: UDMAP receive flow index for non-optional configuration. + * @rx_ch_index: Specifies the index of the receive channel using the flow_index + * @rx_einfo_present: UDMAP receive flow extended packet info present. + * @rx_psinfo_present: UDMAP receive flow PS words present. + * @rx_error_handling: UDMAP receive flow error handling configuration. Valid + * values are TI_SCI_RM_UDMAP_RX_FLOW_ERR_DROP/RETRY. + * @rx_desc_type: UDMAP receive flow descriptor type. It can be one of + * TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST/MONO. + * @rx_sop_offset: UDMAP receive flow start of packet offset. + * @rx_dest_qnum: UDMAP receive flow destination queue number. + * @rx_ps_location: UDMAP receive flow PS words location. + * 0 - end of packet descriptor + * 1 - Beginning of the data buffer + * @rx_src_tag_hi: UDMAP receive flow source tag high byte constant + * @rx_src_tag_lo: UDMAP receive flow source tag low byte constant + * @rx_dest_tag_hi: UDMAP receive flow destination tag high byte constant + * @rx_dest_tag_lo: UDMAP receive flow destination tag low byte constant + * @rx_src_tag_hi_sel: UDMAP receive flow source tag high byte selector + * @rx_src_tag_lo_sel: UDMAP receive flow source tag low byte selector + * @rx_dest_tag_hi_sel: UDMAP receive flow destination tag high byte selector + * @rx_dest_tag_lo_sel: UDMAP receive flow destination tag low byte selector + * @rx_size_thresh_en: UDMAP receive flow packet size based free buffer queue + * enable. If enabled, the ti_sci_rm_udmap_rx_flow_opt_cfg also need to be + * configured and sent. + * @rx_fdq0_sz0_qnum: UDMAP receive flow free descriptor queue 0. + * @rx_fdq1_qnum: UDMAP receive flow free descriptor queue 1. + * @rx_fdq2_qnum: UDMAP receive flow free descriptor queue 2. + * @rx_fdq3_qnum: UDMAP receive flow free descriptor queue 3. + * + * For detailed information on the settings, see the UDMAP section of the TRM. + */ +struct ti_sci_msg_udmap_rx_flow_cfg { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 flow_index; + u32 rx_ch_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_ps_location; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u8 rx_size_thresh_en; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; +} __packed; + +/** + * struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg - parameters for UDMAP receive + * flow optional configuration + * @hdr: Generic Header + * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is + * allocated + * @flow_index: UDMAP receive flow index for optional configuration. + * @rx_ch_index: Specifies the index of the receive channel using the flow_index + * @rx_size_thresh0: UDMAP receive flow packet size threshold 0. + * @rx_size_thresh1: UDMAP receive flow packet size threshold 1. + * @rx_size_thresh2: UDMAP receive flow packet size threshold 2. + * @rx_fdq0_sz1_qnum: UDMAP receive flow free descriptor queue for size + * threshold 1. + * @rx_fdq0_sz2_qnum: UDMAP receive flow free descriptor queue for size + * threshold 2. + * @rx_fdq0_sz3_qnum: UDMAP receive flow free descriptor queue for size + * threshold 3. + * + * For detailed information on the settings, see the UDMAP section of the TRM. + */ +struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg { + struct ti_sci_msg_hdr hdr; + u32 nav_id; + u32 flow_index; + u32 rx_ch_index; + u16 rx_size_thresh0; + u16 rx_size_thresh1; + u16 rx_size_thresh2; + u16 rx_fdq0_sz1_qnum; + u16 rx_fdq0_sz2_qnum; + u16 rx_fdq0_sz3_qnum; +} __packed; + +/** + * Configures a Navigator Subsystem UDMAP transmit channel + * + * Configures the non-real-time registers of a Navigator Subsystem UDMAP + * transmit channel. The channel index must be assigned to the host defined + * in the TISCI header via the RM board configuration resource assignment + * range list. + * + * @hdr: Generic Header + * + * @valid_params: Bitfield defining validity of tx channel configuration + * parameters. The tx channel configuration fields are not valid, and will not + * be used for ch configuration, if their corresponding valid bit is zero. + * Valid bit usage: + * 0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err + * 1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype + * 2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type + * 3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size + * 4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum + * 5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority + * 6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos + * 7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid + * 8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority + * 9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo + * 10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords + * 11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt + * 12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count + * 13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth + * 14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size + * + * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located + * + * @index: UDMAP transmit channel index. + * + * @tx_pause_on_err: UDMAP transmit channel pause on error configuration to + * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG + * register. + * + * @tx_filt_einfo: UDMAP transmit channel extended packet information passing + * configuration to be programmed into the tx_filt_einfo field of the + * channel's TCHAN_TCFG register. + * + * @tx_filt_pswords: UDMAP transmit channel protocol specific word passing + * configuration to be programmed into the tx_filt_pswords field of the + * channel's TCHAN_TCFG register. + * + * @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer + * interpretation configuration to be programmed into the tx_atype field of + * the channel's TCHAN_TCFG register. + * + * @tx_chan_type: UDMAP transmit channel functional channel type and work + * passing mechanism configuration to be programmed into the tx_chan_type + * field of the channel's TCHAN_TCFG register. + * + * @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression + * configuration to be programmed into the tx_supr_tdpkt field of the channel's + * TCHAN_TCFG register. + * + * @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to + * fetch configuration to be programmed into the tx_fetch_size field of the + * channel's TCHAN_TCFG register. The user must make sure to set the maximum + * word count that can pass through the channel for any allowed descriptor type. + * + * @tx_credit_count: UDMAP transmit channel transfer request credit count + * configuration to be programmed into the count field of the TCHAN_TCREDIT + * register. Specifies how many credits for complete TRs are available. + * + * @txcq_qnum: UDMAP transmit channel completion queue configuration to be + * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified + * completion queue must be assigned to the host, or a subordinate of the host, + * requesting configuration of the transmit channel. + * + * @tx_priority: UDMAP transmit channel transmit priority value to be programmed + * into the priority field of the channel's TCHAN_TPRI_CTRL register. + * + * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the + * qos field of the channel's TCHAN_TPRI_CTRL register. + * + * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into + * the orderid field of the channel's TCHAN_TPRI_CTRL register. + * + * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed + * into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of + * Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP + * section of the TRM for restrictions regarding this parameter. + * + * @tx_sched_priority: UDMAP transmit channel tx scheduling priority + * configuration to be programmed into the priority field of the channel's + * TCHAN_TST_SCHED register. + * + * @tx_burst_size: UDMAP transmit channel burst size configuration to be + * programmed into the tx_burst_size field of the TCHAN_TCFG register. + */ +struct ti_sci_msg_rm_udmap_tx_ch_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 index; + u8 tx_pause_on_err; + u8 tx_filt_einfo; + u8 tx_filt_pswords; + u8 tx_atype; + u8 tx_chan_type; + u8 tx_supr_tdpkt; + u16 tx_fetch_size; + u8 tx_credit_count; + u16 txcq_qnum; + u8 tx_priority; + u8 tx_qos; + u8 tx_orderid; + u16 fdepth; + u8 tx_sched_priority; + u8 tx_burst_size; +} __packed; + +/** + * Configures a Navigator Subsystem UDMAP receive channel + * + * Configures the non-real-time registers of a Navigator Subsystem UDMAP + * receive channel. The channel index must be assigned to the host defined + * in the TISCI header via the RM board configuration resource assignment + * range list. + * + * @hdr: Generic Header + * + * @valid_params: Bitfield defining validity of rx channel configuration + * parameters. + * The rx channel configuration fields are not valid, and will not be used for + * ch configuration, if their corresponding valid bit is zero. + * Valid bit usage: + * 0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err + * 1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype + * 2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type + * 3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size + * 4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum + * 5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority + * 6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos + * 7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid + * 8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority + * 9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start + * 10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt + * 11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short + * 12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long + * 14 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_burst_size + * + * @nav_id: SoC device ID of Navigator Subsystem where rx channel is located + * + * @index: UDMAP receive channel index. + * + * @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to + * fetch configuration to be programmed into the rx_fetch_size field of the + * channel's RCHAN_RCFG register. + * + * @rxcq_qnum: UDMAP receive channel completion queue configuration to be + * programmed into the rxcq_qnum field of the RCHAN_RCQ register. + * The specified completion queue must be assigned to the host, or a subordinate + * of the host, requesting configuration of the receive channel. + * + * @rx_priority: UDMAP receive channel receive priority value to be programmed + * into the priority field of the channel's RCHAN_RPRI_CTRL register. + * + * @rx_qos: UDMAP receive channel receive qos value to be programmed into the + * qos field of the channel's RCHAN_RPRI_CTRL register. + * + * @rx_orderid: UDMAP receive channel bus order id value to be programmed into + * the orderid field of the channel's RCHAN_RPRI_CTRL register. + * + * @rx_sched_priority: UDMAP receive channel rx scheduling priority + * configuration to be programmed into the priority field of the channel's + * RCHAN_RST_SCHED register. + * + * @flowid_start: UDMAP receive channel additional flows starting index + * configuration to program into the flow_start field of the RCHAN_RFLOW_RNG + * register. Specifies the starting index for flow IDs the receive channel is to + * make use of beyond the default flow. flowid_start and @ref flowid_cnt must be + * set as valid and configured together. The starting flow ID set by + * @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset + * of flows beyond the default flows statically mapped to receive channels. + * The additional flows must be assigned to the host, or a subordinate of the + * host, requesting configuration of the receive channel. + * + * @flowid_cnt: UDMAP receive channel additional flows count configuration to + * program into the flowid_cnt field of the RCHAN_RFLOW_RNG register. + * This field specifies how many flow IDs are in the additional contiguous range + * of legal flow IDs for the channel. @ref flowid_start and flowid_cnt must be + * set as valid and configured together. Disabling the valid_params field bit + * for flowid_cnt indicates no flow IDs other than the default are to be + * allocated and used by the receive channel. @ref flowid_start plus flowid_cnt + * cannot be greater than the number of receive flows in the receive channel's + * Navigator Subsystem. The additional flows must be assigned to the host, or a + * subordinate of the host, requesting configuration of the receive channel. + * + * @rx_pause_on_err: UDMAP receive channel pause on error configuration to be + * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG + * register. + * + * @rx_atype: UDMAP receive channel non Ring Accelerator access pointer + * interpretation configuration to be programmed into the rx_atype field of the + * channel's RCHAN_RCFG register. + * + * @rx_chan_type: UDMAP receive channel functional channel type and work passing + * mechanism configuration to be programmed into the rx_chan_type field of the + * channel's RCHAN_RCFG register. + * + * @rx_ignore_short: UDMAP receive channel short packet treatment configuration + * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register. + * + * @rx_ignore_long: UDMAP receive channel long packet treatment configuration to + * be programmed into the rx_ignore_long field of the RCHAN_RCFG register. + * + * @rx_burst_size: UDMAP receive channel burst size configuration to be + * programmed into the rx_burst_size field of the RCHAN_RCFG register. + */ +struct ti_sci_msg_rm_udmap_rx_ch_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 index; + u16 rx_fetch_size; + u16 rxcq_qnum; + u8 rx_priority; + u8 rx_qos; + u8 rx_orderid; + u8 rx_sched_priority; + u16 flowid_start; + u16 flowid_cnt; + u8 rx_pause_on_err; + u8 rx_atype; + u8 rx_chan_type; + u8 rx_ignore_short; + u8 rx_ignore_long; + u8 rx_burst_size; +} __packed; + +/** + * Configures a Navigator Subsystem UDMAP receive flow + * + * Configures a Navigator Subsystem UDMAP receive flow's registers. + * Configuration does not include the flow registers which handle size-based + * free descriptor queue routing. + * + * The flow index must be assigned to the host defined in the TISCI header via + * the RM board configuration resource assignment range list. + * + * @hdr: Standard TISCI header + * + * @valid_params + * Bitfield defining validity of rx flow configuration parameters. The + * rx flow configuration fields are not valid, and will not be used for flow + * configuration, if their corresponding valid bit is zero. Valid bit usage: + * 0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present + * 1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present + * 2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling + * 3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type + * 4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset + * 5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum + * 6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi + * 7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo + * 8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi + * 9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo + * 10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel + * 11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel + * 12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel + * 13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel + * 14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum + * 15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum + * 16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum + * 17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum + * 18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location + * + * @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is + * allocated + * + * @flow_index: UDMAP receive flow index for non-optional configuration. + * + * @rx_einfo_present: + * UDMAP receive flow extended packet info present configuration to be + * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register. + * + * @rx_psinfo_present: + * UDMAP receive flow PS words present configuration to be programmed into the + * rx_psinfo_present field of the flow's RFLOW_RFA register. + * + * @rx_error_handling: + * UDMAP receive flow error handling configuration to be programmed into the + * rx_error_handling field of the flow's RFLOW_RFA register. + * + * @rx_desc_type: + * UDMAP receive flow descriptor type configuration to be programmed into the + * rx_desc_type field field of the flow's RFLOW_RFA register. + * + * @rx_sop_offset: + * UDMAP receive flow start of packet offset configuration to be programmed + * into the rx_sop_offset field of the RFLOW_RFA register. See the UDMAP + * section of the TRM for more information on this setting. Valid values for + * this field are 0-255 bytes. + * + * @rx_dest_qnum: + * UDMAP receive flow destination queue configuration to be programmed into the + * rx_dest_qnum field of the flow's RFLOW_RFA register. The specified + * destination queue must be valid within the Navigator Subsystem and must be + * owned by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_src_tag_hi: + * UDMAP receive flow source tag high byte constant configuration to be + * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_src_tag_lo: + * UDMAP receive flow source tag low byte constant configuration to be + * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_hi: + * UDMAP receive flow destination tag high byte constant configuration to be + * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_lo: + * UDMAP receive flow destination tag low byte constant configuration to be + * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register. + * See the UDMAP section of the TRM for more information on this setting. + * + * @rx_src_tag_hi_sel: + * UDMAP receive flow source tag high byte selector configuration to be + * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_src_tag_lo_sel: + * UDMAP receive flow source tag low byte selector configuration to be + * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_hi_sel: + * UDMAP receive flow destination tag high byte selector configuration to be + * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_dest_tag_lo_sel: + * UDMAP receive flow destination tag low byte selector configuration to be + * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register. See + * the UDMAP section of the TRM for more information on this setting. + * + * @rx_fdq0_sz0_qnum: + * UDMAP receive flow free descriptor queue 0 configuration to be programmed + * into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_fdq1_qnum: + * UDMAP receive flow free descriptor queue 1 configuration to be programmed + * into the rx_fdq1_qnum field of the flow's RFLOW_RFD register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_fdq2_qnum: + * UDMAP receive flow free descriptor queue 2 configuration to be programmed + * into the rx_fdq2_qnum field of the flow's RFLOW_RFE register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_fdq3_qnum: + * UDMAP receive flow free descriptor queue 3 configuration to be programmed + * into the rx_fdq3_qnum field of the flow's RFLOW_RFE register. See the + * UDMAP section of the TRM for more information on this setting. The specified + * free queue must be valid within the Navigator Subsystem and must be owned + * by the host, or a subordinate of the host, requesting allocation and + * configuration of the receive flow. + * + * @rx_ps_location: + * UDMAP receive flow PS words location configuration to be programmed into the + * rx_ps_location field of the flow's RFLOW_RFA register. + */ +struct ti_sci_msg_rm_udmap_flow_cfg_req { + struct ti_sci_msg_hdr hdr; + u32 valid_params; + u16 nav_id; + u16 flow_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; + u8 rx_ps_location; +} __packed; + #endif /* __TI_SCI_H */ |