diff options
Diffstat (limited to 'drivers/gpio/gpio-pxa.c')
| -rw-r--r-- | drivers/gpio/gpio-pxa.c | 55 |
1 files changed, 33 insertions, 22 deletions
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index ad3feec0075e..2fdb04b6f101 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -17,6 +17,7 @@ #include <linux/gpio.h> #include <linux/gpio-pxa.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/irqchip/chained_irq.h> @@ -27,8 +28,6 @@ #include <linux/syscore_ops.h> #include <linux/slab.h> -#include <mach/irqs.h> - /* * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with * one set of registers. The register offsets are organized below: @@ -42,9 +41,12 @@ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 * + * BANK 6 - 0x0200 0x020C 0x0218 0x0224 0x0230 0x023C 0x0248 + * * NOTE: * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 + * BANK 4 and 5 are only available on PXA935, PXA1928 + * BANK 6 is only available on PXA1928 */ #define GPLR_OFFSET 0x00 @@ -57,7 +59,8 @@ #define GAFR_OFFSET 0x54 #define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */ -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : ((n) > 5 ? 0x200 : 0x100) \ + + (((n) % 3) << 2)) int pxa_last_gpio; static int irq_base; @@ -93,6 +96,7 @@ enum pxa_gpio_type { PXA93X_GPIO, MMP_GPIO = 0x10, MMP2_GPIO, + PXA1928_GPIO, }; struct pxa_gpio_id { @@ -140,6 +144,11 @@ static struct pxa_gpio_id mmp2_id = { .gpio_nums = 192, }; +static struct pxa_gpio_id pxa1928_id = { + .type = PXA1928_GPIO, + .gpio_nums = 224, +}; + #define for_each_gpio_chip(i, c) \ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) @@ -487,6 +496,7 @@ static int pxa_gpio_nums(struct platform_device *pdev) case PXA93X_GPIO: case MMP_GPIO: case MMP2_GPIO: + case PXA1928_GPIO: gpio_type = pxa_id->type; count = pxa_id->gpio_nums - 1; break; @@ -506,6 +516,7 @@ static const struct of_device_id pxa_gpio_dt_ids[] = { { .compatible = "marvell,pxa93x-gpio", .data = &pxa93x_id, }, { .compatible = "marvell,mmp-gpio", .data = &mmp_id, }, { .compatible = "marvell,mmp2-gpio", .data = &mmp2_id, }, + { .compatible = "marvell,pxa1928-gpio", .data = &pxa1928_id, }, {} }; @@ -629,19 +640,18 @@ static int pxa_gpio_probe(struct platform_device *pdev) } if (!use_of) { -#ifdef CONFIG_ARCH_PXA - irq = gpio_to_irq(0); - irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler); - - irq = gpio_to_irq(1); - irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler); -#endif + if (irq0 > 0) { + irq = gpio_to_irq(0); + irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, + handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + if (irq1 > 0) { + irq = gpio_to_irq(1); + irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, + handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } for (irq = gpio_to_irq(gpio_offset); irq <= gpio_to_irq(pxa_last_gpio); irq++) { @@ -649,13 +659,13 @@ static int pxa_gpio_probe(struct platform_device *pdev) handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - } else { - if (irq0 > 0) - irq_set_chained_handler(irq0, pxa_gpio_demux_handler); - if (irq1 > 0) - irq_set_chained_handler(irq1, pxa_gpio_demux_handler); } + if (irq0 > 0) + irq_set_chained_handler(irq0, pxa_gpio_demux_handler); + if (irq1 > 0) + irq_set_chained_handler(irq1, pxa_gpio_demux_handler); + irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler); return 0; } @@ -668,6 +678,7 @@ static const struct platform_device_id gpio_id_table[] = { { "pxa93x-gpio", (unsigned long)&pxa93x_id }, { "mmp-gpio", (unsigned long)&mmp_id }, { "mmp2-gpio", (unsigned long)&mmp2_id }, + { "pxa1928-gpio", (unsigned long)&pxa1928_id }, { }, }; |