diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-mlxbf2.c | 335 |
3 files changed, 343 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b8013cf90064..6234ccc90e7e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1399,6 +1399,13 @@ config GPIO_MLXBF help Say Y here if you want GPIO support on Mellanox BlueField SoC. +config GPIO_MLXBF2 + tristate "Mellanox BlueField 2 SoC GPIO" + depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST) + select GPIO_GENERIC + help + Say Y here if you want GPIO support on Mellanox BlueField 2 SoC. + config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" depends on X86 || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 0b571264ddbc..b2cfc21a97f3 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -93,6 +93,7 @@ obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o +obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c new file mode 100644 index 000000000000..7b7085050219 --- /dev/null +++ b/drivers/gpio/gpio-mlxbf2.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/acpi.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/resource.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/version.h> + +/* + * There are 3 YU GPIO blocks: + * gpio[0]: HOST_GPIO0->HOST_GPIO31 + * gpio[1]: HOST_GPIO32->HOST_GPIO63 + * gpio[2]: HOST_GPIO64->HOST_GPIO69 + */ +#define MLXBF2_GPIO_MAX_PINS_PER_BLOCK 32 + +/* + * arm_gpio_lock register: + * bit[31] lock status: active if set + * bit[15:0] set lock + * The lock is enabled only if 0xd42f is written to this field + */ +#define YU_ARM_GPIO_LOCK_ADDR 0x2801088 +#define YU_ARM_GPIO_LOCK_SIZE 0x8 +#define YU_LOCK_ACTIVE_BIT(val) (val >> 31) +#define YU_ARM_GPIO_LOCK_ACQUIRE 0xd42f +#define YU_ARM_GPIO_LOCK_RELEASE 0x0 + +/* + * gpio[x] block registers and their offset + */ +#define YU_GPIO_DATAIN 0x04 +#define YU_GPIO_MODE1 0x08 +#define YU_GPIO_MODE0 0x0c +#define YU_GPIO_DATASET 0x14 +#define YU_GPIO_DATACLEAR 0x18 +#define YU_GPIO_MODE1_CLEAR 0x50 +#define YU_GPIO_MODE0_SET 0x54 +#define YU_GPIO_MODE0_CLEAR 0x58 + +#ifdef CONFIG_PM +struct mlxbf2_gpio_context_save_regs { + u32 gpio_mode0; + u32 gpio_mode1; +}; +#endif + +/* BlueField-2 gpio block context structure. */ +struct mlxbf2_gpio_context { + struct gpio_chip gc; + + /* YU GPIO blocks address */ + void __iomem *gpio_io; + +#ifdef CONFIG_PM + struct mlxbf2_gpio_context_save_regs *csave_regs; +#endif +}; + +/* BlueField-2 gpio shared structure. */ +struct mlxbf2_gpio_param { + void __iomem *io; + struct resource *res; + struct mutex *lock; +}; + +static struct resource yu_arm_gpio_lock_res = { + .start = YU_ARM_GPIO_LOCK_ADDR, + .end = YU_ARM_GPIO_LOCK_ADDR + YU_ARM_GPIO_LOCK_SIZE - 1, + .name = "YU_ARM_GPIO_LOCK", +}; + +static DEFINE_MUTEX(yu_arm_gpio_lock_mutex); + +static struct mlxbf2_gpio_param yu_arm_gpio_lock_param = { + .res = &yu_arm_gpio_lock_res, + .lock = &yu_arm_gpio_lock_mutex, +}; + +/* Request memory region and map yu_arm_gpio_lock resource */ +static int mlxbf2_gpio_get_lock_res(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + resource_size_t size; + int ret = 0; + + mutex_lock(yu_arm_gpio_lock_param.lock); + + /* Check if the memory map already exists */ + if (yu_arm_gpio_lock_param.io) + goto exit; + + res = yu_arm_gpio_lock_param.res; + size = resource_size(res); + + if (!devm_request_mem_region(dev, res->start, size, res->name)) { + ret = -EFAULT; + goto exit; + } + + yu_arm_gpio_lock_param.io = devm_ioremap(dev, res->start, size); + if (IS_ERR(yu_arm_gpio_lock_param.io)) + ret = PTR_ERR(yu_arm_gpio_lock_param.io); + +exit: + mutex_unlock(yu_arm_gpio_lock_param.lock); + + return ret; +} + +/* + * Acquire the YU arm_gpio_lock to be able to change the direction + * mode. If the lock_active bit is already set, return an error. + */ +static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs) +{ + u32 arm_gpio_lock_val; + + spin_lock(&gs->gc.bgpio_lock); + mutex_lock(yu_arm_gpio_lock_param.lock); + + arm_gpio_lock_val = readl(yu_arm_gpio_lock_param.io); + + /* + * When lock active bit[31] is set, ModeX is write enabled + */ + if (YU_LOCK_ACTIVE_BIT(arm_gpio_lock_val)) { + mutex_unlock(yu_arm_gpio_lock_param.lock); + spin_unlock(&gs->gc.bgpio_lock); + return -EINVAL; + } + + writel(YU_ARM_GPIO_LOCK_ACQUIRE, yu_arm_gpio_lock_param.io); + + return 0; +} + +/* + * Release the YU arm_gpio_lock after changing the direction mode. + */ +static void mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context *gs) +{ + writel(YU_ARM_GPIO_LOCK_RELEASE, yu_arm_gpio_lock_param.io); + mutex_unlock(yu_arm_gpio_lock_param.lock); + spin_unlock(&gs->gc.bgpio_lock); +} + +/* + * mode0 and mode1 are both locked by the gpio_lock field. + * + * Together, mode0 and mode1 define the gpio Mode dependeing also + * on Reg_DataOut. + * + * {mode1,mode0}:{Reg_DataOut=0,Reg_DataOut=1}->{DataOut=0,DataOut=1} + * + * {0,0}:Reg_DataOut{0,1}->{Z,Z} Input PAD + * {0,1}:Reg_DataOut{0,1}->{0,1} Full drive Output PAD + * {1,0}:Reg_DataOut{0,1}->{0,Z} 0-set PAD to low, 1-float + * {1,1}:Reg_DataOut{0,1}->{Z,1} 0-float, 1-set PAD to high + */ + +/* + * Set input direction: + * {mode1,mode0} = {0,0} + */ +static int mlxbf2_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip); + int ret; + + /* + * Although the arm_gpio_lock was set in the probe function, check again + * if it is still enabled to be able to write to the ModeX registers. + */ + ret = mlxbf2_gpio_lock_acquire(gs); + if (ret < 0) + return ret; + + writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_CLEAR); + writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR); + + mlxbf2_gpio_lock_release(gs); + + return ret; +} + +/* + * Set output direction: + * {mode1,mode0} = {0,1} + */ +static int mlxbf2_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, + int value) +{ + struct mlxbf2_gpio_context *gs = gpiochip_get_data(chip); + int ret = 0; + + /* + * Although the arm_gpio_lock was set in the probe function, + * check again it is still enabled to be able to write to the + * ModeX registers. + */ + ret = mlxbf2_gpio_lock_acquire(gs); + if (ret < 0) + return ret; + + writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE1_CLEAR); + writel(BIT(offset), gs->gpio_io + YU_GPIO_MODE0_SET); + + mlxbf2_gpio_lock_release(gs); + + return ret; +} + +/* BlueField-2 GPIO driver initialization routine. */ +static int +mlxbf2_gpio_probe(struct platform_device *pdev) +{ + struct mlxbf2_gpio_context *gs; + struct device *dev = &pdev->dev; + struct gpio_chip *gc; + struct resource *res; + unsigned int npins; + int ret; + + gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); + if (!gs) + return -ENOMEM; + + /* YU GPIO block address */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + gs->gpio_io = devm_ioremap(dev, res->start, resource_size(res)); + if (!gs->gpio_io) + return -ENOMEM; + + ret = mlxbf2_gpio_get_lock_res(pdev); + if (ret) { + dev_err(dev, "Failed to get yu_arm_gpio_lock resource\n"); + return ret; + } + + if (device_property_read_u32(dev, "npins", &npins)) + npins = MLXBF2_GPIO_MAX_PINS_PER_BLOCK; + + gc = &gs->gc; + + ret = bgpio_init(gc, dev, 4, + gs->gpio_io + YU_GPIO_DATAIN, + gs->gpio_io + YU_GPIO_DATASET, + gs->gpio_io + YU_GPIO_DATACLEAR, + NULL, + NULL, + 0); + + gc->direction_input = mlxbf2_gpio_direction_input; + gc->direction_output = mlxbf2_gpio_direction_output; + gc->ngpio = npins; + gc->owner = THIS_MODULE; + + platform_set_drvdata(pdev, gs); + + ret = devm_gpiochip_add_data(dev, &gs->gc, gs); + if (ret) { + dev_err(dev, "Failed adding memory mapped gpiochip\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_PM +static int mlxbf2_gpio_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev); + + gs->csave_regs->gpio_mode0 = readl(gs->gpio_io + + YU_GPIO_MODE0); + gs->csave_regs->gpio_mode1 = readl(gs->gpio_io + + YU_GPIO_MODE1); + + return 0; +} + +static int mlxbf2_gpio_resume(struct platform_device *pdev) +{ + struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev); + + writel(gs->csave_regs->gpio_mode0, gs->gpio_io + + YU_GPIO_MODE0); + writel(gs->csave_regs->gpio_mode1, gs->gpio_io + + YU_GPIO_MODE1); + + return 0; +} +#endif + +static const struct acpi_device_id mlxbf2_gpio_acpi_match[] = { + { "MLNXBF22", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, mlxbf2_gpio_acpi_match); + +static struct platform_driver mlxbf2_gpio_driver = { + .driver = { + .name = "mlxbf2_gpio", + .acpi_match_table = ACPI_PTR(mlxbf2_gpio_acpi_match), + }, + .probe = mlxbf2_gpio_probe, +#ifdef CONFIG_PM + .suspend = mlxbf2_gpio_suspend, + .resume = mlxbf2_gpio_resume, +#endif +}; + +module_platform_driver(mlxbf2_gpio_driver); + +MODULE_DESCRIPTION("Mellanox BlueField-2 GPIO Driver"); +MODULE_AUTHOR("Mellanox Technologies"); +MODULE_LICENSE("GPL v2"); |