diff options
Diffstat (limited to 'drivers/gpu/drm/drm_dp_helper.c')
| -rw-r--r-- | drivers/gpu/drm/drm_dp_helper.c | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 9e978aae8972..27671489477d 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -346,3 +346,399 @@ int drm_dp_bw_code_to_link_rate(u8 link_bw) } } EXPORT_SYMBOL(drm_dp_bw_code_to_link_rate); + +/** + * DOC: dp helpers + * + * The DisplayPort AUX channel is an abstraction to allow generic, driver- + * independent access to AUX functionality. Drivers can take advantage of + * this by filling in the fields of the drm_dp_aux structure. + * + * Transactions are described using a hardware-independent drm_dp_aux_msg + * structure, which is passed into a driver's .transfer() implementation. + * Both native and I2C-over-AUX transactions are supported. + */ + +static int drm_dp_dpcd_access(struct drm_dp_aux *aux, u8 request, + unsigned int offset, void *buffer, size_t size) +{ + struct drm_dp_aux_msg msg; + unsigned int retry; + int err; + + memset(&msg, 0, sizeof(msg)); + msg.address = offset; + msg.request = request; + msg.buffer = buffer; + msg.size = size; + + /* + * The specification doesn't give any recommendation on how often to + * retry native transactions, so retry 7 times like for I2C-over-AUX + * transactions. + */ + for (retry = 0; retry < 7; retry++) { + err = aux->transfer(aux, &msg); + if (err < 0) { + if (err == -EBUSY) + continue; + + return err; + } + + + switch (msg.reply & DP_AUX_NATIVE_REPLY_MASK) { + case DP_AUX_NATIVE_REPLY_ACK: + if (err < size) + return -EPROTO; + return err; + + case DP_AUX_NATIVE_REPLY_NACK: + return -EIO; + + case DP_AUX_NATIVE_REPLY_DEFER: + usleep_range(400, 500); + break; + } + } + + DRM_DEBUG_KMS("too many retries, giving up\n"); + return -EIO; +} + +/** + * drm_dp_dpcd_read() - read a series of bytes from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the (first) register to read + * @buffer: buffer to store the register values + * @size: number of bytes in @buffer + * + * Returns the number of bytes transferred on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size) +{ + return drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, offset, buffer, + size); +} +EXPORT_SYMBOL(drm_dp_dpcd_read); + +/** + * drm_dp_dpcd_write() - write a series of bytes to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the (first) register to write + * @buffer: buffer containing the values to write + * @size: number of bytes in @buffer + * + * Returns the number of bytes transferred on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, + void *buffer, size_t size) +{ + return drm_dp_dpcd_access(aux, DP_AUX_NATIVE_WRITE, offset, buffer, + size); +} +EXPORT_SYMBOL(drm_dp_dpcd_write); + +/** + * drm_dp_dpcd_read_link_status() - read DPCD link status (bytes 0x202-0x207) + * @aux: DisplayPort AUX channel + * @status: buffer to store the link status in (must be at least 6 bytes) + * + * Returns the number of bytes transferred on success or a negative error + * code on failure. + */ +int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, + u8 status[DP_LINK_STATUS_SIZE]) +{ + return drm_dp_dpcd_read(aux, DP_LANE0_1_STATUS, status, + DP_LINK_STATUS_SIZE); +} +EXPORT_SYMBOL(drm_dp_dpcd_read_link_status); + +/** + * drm_dp_link_probe() - probe a DisplayPort link for capabilities + * @aux: DisplayPort AUX channel + * @link: pointer to structure in which to return link capabilities + * + * The structure filled in by this function can usually be passed directly + * into drm_dp_link_power_up() and drm_dp_link_configure() to power up and + * configure the link based on the link's capabilities. + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link) +{ + u8 values[3]; + int err; + + memset(link, 0, sizeof(*link)); + + err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values)); + if (err < 0) + return err; + + link->revision = values[0]; + link->rate = drm_dp_bw_code_to_link_rate(values[1]); + link->num_lanes = values[2] & DP_MAX_LANE_COUNT_MASK; + + if (values[2] & DP_ENHANCED_FRAME_CAP) + link->capabilities |= DP_LINK_CAP_ENHANCED_FRAMING; + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_probe); + +/** + * drm_dp_link_power_up() - power up a DisplayPort link + * @aux: DisplayPort AUX channel + * @link: pointer to a structure containing the link configuration + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link) +{ + u8 value; + int err; + + /* DP_SET_POWER register is only available on DPCD v1.1 and later */ + if (link->revision < 0x11) + return 0; + + err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value); + if (err < 0) + return err; + + value &= ~DP_SET_POWER_MASK; + value |= DP_SET_POWER_D0; + + err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value); + if (err < 0) + return err; + + /* + * According to the DP 1.1 specification, a "Sink Device must exit the + * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink + * Control Field" (register 0x600). + */ + usleep_range(1000, 2000); + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_power_up); + +/** + * drm_dp_link_configure() - configure a DisplayPort link + * @aux: DisplayPort AUX channel + * @link: pointer to a structure containing the link configuration + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link) +{ + u8 values[2]; + int err; + + values[0] = drm_dp_link_rate_to_bw_code(link->rate); + values[1] = link->num_lanes; + + if (link->capabilities & DP_LINK_CAP_ENHANCED_FRAMING) + values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + + err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_configure); + +/* + * I2C-over-AUX implementation + */ + +static u32 drm_dp_i2c_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +/* + * Transfer a single I2C-over-AUX message and handle various error conditions, + * retrying the transaction as appropriate. + */ +static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) +{ + unsigned int retry; + int err; + + /* + * DP1.2 sections 2.7.7.1.5.6.1 and 2.7.7.1.6.6.1: A DP Source device + * is required to retry at least seven times upon receiving AUX_DEFER + * before giving up the AUX transaction. + */ + for (retry = 0; retry < 7; retry++) { + err = aux->transfer(aux, msg); + if (err < 0) { + if (err == -EBUSY) + continue; + + DRM_DEBUG_KMS("transaction failed: %d\n", err); + return err; + } + + + switch (msg->reply & DP_AUX_NATIVE_REPLY_MASK) { + case DP_AUX_NATIVE_REPLY_ACK: + /* + * For I2C-over-AUX transactions this isn't enough, we + * need to check for the I2C ACK reply. + */ + break; + + case DP_AUX_NATIVE_REPLY_NACK: + DRM_DEBUG_KMS("native nack\n"); + return -EREMOTEIO; + + case DP_AUX_NATIVE_REPLY_DEFER: + DRM_DEBUG_KMS("native defer"); + /* + * We could check for I2C bit rate capabilities and if + * available adjust this interval. We could also be + * more careful with DP-to-legacy adapters where a + * long legacy cable may force very low I2C bit rates. + * + * For now just defer for long enough to hopefully be + * safe for all use-cases. + */ + usleep_range(500, 600); + continue; + + default: + DRM_ERROR("invalid native reply %#04x\n", msg->reply); + return -EREMOTEIO; + } + + switch (msg->reply & DP_AUX_I2C_REPLY_MASK) { + case DP_AUX_I2C_REPLY_ACK: + /* + * Both native ACK and I2C ACK replies received. We + * can assume the transfer was successful. + */ + if (err < msg->size) + return -EPROTO; + return 0; + + case DP_AUX_I2C_REPLY_NACK: + DRM_DEBUG_KMS("I2C nack\n"); + return -EREMOTEIO; + + case DP_AUX_I2C_REPLY_DEFER: + DRM_DEBUG_KMS("I2C defer\n"); + usleep_range(400, 500); + continue; + + default: + DRM_ERROR("invalid I2C reply %#04x\n", msg->reply); + return -EREMOTEIO; + } + } + + DRM_DEBUG_KMS("too many retries, giving up\n"); + return -EREMOTEIO; +} + +static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, + int num) +{ + struct drm_dp_aux *aux = adapter->algo_data; + unsigned int i, j; + + for (i = 0; i < num; i++) { + struct drm_dp_aux_msg msg; + int err; + + /* + * Many hardware implementations support FIFOs larger than a + * single byte, but it has been empirically determined that + * transferring data in larger chunks can actually lead to + * decreased performance. Therefore each message is simply + * transferred byte-by-byte. + */ + for (j = 0; j < msgs[i].len; j++) { + memset(&msg, 0, sizeof(msg)); + msg.address = msgs[i].addr; + + msg.request = (msgs[i].flags & I2C_M_RD) ? + DP_AUX_I2C_READ : + DP_AUX_I2C_WRITE; + + /* + * All messages except the last one are middle-of- + * transfer messages. + */ + if ((i < num - 1) || (j < msgs[i].len - 1)) + msg.request |= DP_AUX_I2C_MOT; + + msg.buffer = msgs[i].buf + j; + msg.size = 1; + + err = drm_dp_i2c_do_msg(aux, &msg); + if (err < 0) + return err; + } + } + + return num; +} + +static const struct i2c_algorithm drm_dp_i2c_algo = { + .functionality = drm_dp_i2c_functionality, + .master_xfer = drm_dp_i2c_xfer, +}; + +/** + * drm_dp_aux_register_i2c_bus() - register an I2C adapter for I2C-over-AUX + * @aux: DisplayPort AUX channel + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_aux_register_i2c_bus(struct drm_dp_aux *aux) +{ + aux->ddc.algo = &drm_dp_i2c_algo; + aux->ddc.algo_data = aux; + aux->ddc.retries = 3; + + aux->ddc.class = I2C_CLASS_DDC; + aux->ddc.owner = THIS_MODULE; + aux->ddc.dev.parent = aux->dev; + aux->ddc.dev.of_node = aux->dev->of_node; + + strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(aux->dev), + sizeof(aux->ddc.name)); + + return i2c_add_adapter(&aux->ddc); +} +EXPORT_SYMBOL(drm_dp_aux_register_i2c_bus); + +/** + * drm_dp_aux_unregister_i2c_bus() - unregister an I2C-over-AUX adapter + * @aux: DisplayPort AUX channel + */ +void drm_dp_aux_unregister_i2c_bus(struct drm_dp_aux *aux) +{ + i2c_del_adapter(&aux->ddc); +} +EXPORT_SYMBOL(drm_dp_aux_unregister_i2c_bus); |