diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_reg.h')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 191 |
1 files changed, 155 insertions, 36 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 48d5e8e051cf..acc99b21e0b6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -217,6 +217,9 @@ #define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19) #define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19) #define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) +#define MI_ARB_ON_OFF MI_INSTR(0x08, 0) +#define MI_ARB_ENABLE (1<<0) +#define MI_ARB_DISABLE (0<<0) #define MI_SET_CONTEXT MI_INSTR(0x18, 0) #define MI_MM_SPACE_GTT (1<<8) @@ -299,6 +302,7 @@ #define DISPLAY_PLANE_B (1<<20) #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2)) #define PIPE_CONTROL_CS_STALL (1<<20) +#define PIPE_CONTROL_TLB_INVALIDATE (1<<18) #define PIPE_CONTROL_QW_WRITE (1<<14) #define PIPE_CONTROL_DEPTH_STALL (1<<13) #define PIPE_CONTROL_WRITE_FLUSH (1<<12) @@ -686,10 +690,10 @@ #define GEN6_BLITTER_FBC_NOTIFY (1<<3) #define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050 -#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK (1 << 16) -#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE (1 << 0) -#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0 -#define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3) +#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0) +#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2) +#define GEN6_BSD_SLEEP_INDICATOR (1 << 3) +#define GEN6_BSD_GO_INDICATOR (1 << 4) #define GEN6_BSD_HWSTAM 0x12098 #define GEN6_BSD_IMR 0x120a8 @@ -908,6 +912,7 @@ #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ +#define DPLL_LOCK_VLV (1<<15) #define DPLL_INTEGRATED_CLOCK_VLV (1<<13) #define SRX_INDEX 0x3c4 @@ -1453,6 +1458,10 @@ #define DDRMPLL1 0X12c20 #define PEG_BAND_GAP_DATA 0x14d68 +#define GEN6_GT_THREAD_STATUS_REG 0x13805c +#define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7 +#define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16)) + #define GEN6_GT_PERF_STATUS 0x145948 #define GEN6_RP_STATE_LIMITS 0x145994 #define GEN6_RP_STATE_CAP 0x145998 @@ -1462,6 +1471,31 @@ */ #define CCID 0x2180 #define CCID_EN (1<<0) +#define CXT_SIZE 0x21a0 +#define GEN6_CXT_POWER_SIZE(cxt_reg) ((cxt_reg >> 24) & 0x3f) +#define GEN6_CXT_RING_SIZE(cxt_reg) ((cxt_reg >> 18) & 0x3f) +#define GEN6_CXT_RENDER_SIZE(cxt_reg) ((cxt_reg >> 12) & 0x3f) +#define GEN6_CXT_EXTENDED_SIZE(cxt_reg) ((cxt_reg >> 6) & 0x3f) +#define GEN6_CXT_PIPELINE_SIZE(cxt_reg) ((cxt_reg >> 0) & 0x3f) +#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_POWER_SIZE(cxt_reg) + \ + GEN6_CXT_RING_SIZE(cxt_reg) + \ + GEN6_CXT_RENDER_SIZE(cxt_reg) + \ + GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \ + GEN6_CXT_PIPELINE_SIZE(cxt_reg)) +#define GEN7_CXT_SIZE 0x21a8 +#define GEN7_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 25) & 0x7f) +#define GEN7_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 22) & 0x7) +#define GEN7_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 16) & 0x3f) +#define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f) +#define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7) +#define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f) +#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_POWER_SIZE(ctx_reg) + \ + GEN7_CXT_RING_SIZE(ctx_reg) + \ + GEN7_CXT_RENDER_SIZE(ctx_reg) + \ + GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ + GEN7_CXT_GT1_SIZE(ctx_reg) + \ + GEN7_CXT_VFSTATE_SIZE(ctx_reg)) + /* * Overlay regs */ @@ -1566,20 +1600,34 @@ #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) #define PORT_HOTPLUG_STAT 0x61114 -#define HDMIB_HOTPLUG_INT_STATUS (1 << 29) -#define DPB_HOTPLUG_INT_STATUS (1 << 29) -#define HDMIC_HOTPLUG_INT_STATUS (1 << 28) -#define DPC_HOTPLUG_INT_STATUS (1 << 28) -#define HDMID_HOTPLUG_INT_STATUS (1 << 27) -#define DPD_HOTPLUG_INT_STATUS (1 << 27) +/* HDMI/DP bits are gen4+ */ +#define DPB_HOTPLUG_LIVE_STATUS (1 << 29) +#define DPC_HOTPLUG_LIVE_STATUS (1 << 28) +#define DPD_HOTPLUG_LIVE_STATUS (1 << 27) +#define DPD_HOTPLUG_INT_STATUS (3 << 21) +#define DPC_HOTPLUG_INT_STATUS (3 << 19) +#define DPB_HOTPLUG_INT_STATUS (3 << 17) +/* HDMI bits are shared with the DP bits */ +#define HDMIB_HOTPLUG_LIVE_STATUS (1 << 29) +#define HDMIC_HOTPLUG_LIVE_STATUS (1 << 28) +#define HDMID_HOTPLUG_LIVE_STATUS (1 << 27) +#define HDMID_HOTPLUG_INT_STATUS (3 << 21) +#define HDMIC_HOTPLUG_INT_STATUS (3 << 19) +#define HDMIB_HOTPLUG_INT_STATUS (3 << 17) +/* CRT/TV common between gen3+ */ #define CRT_HOTPLUG_INT_STATUS (1 << 11) #define TV_HOTPLUG_INT_STATUS (1 << 10) #define CRT_HOTPLUG_MONITOR_MASK (3 << 8) #define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) #define CRT_HOTPLUG_MONITOR_MONO (2 << 8) #define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -#define SDVOC_HOTPLUG_INT_STATUS (1 << 7) -#define SDVOB_HOTPLUG_INT_STATUS (1 << 6) +/* SDVO is different across gen3/4 */ +#define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3) +#define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2) +#define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4) +#define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2) +#define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7) +#define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6) /* SDVO port control */ #define SDVOB 0x61140 @@ -1711,8 +1759,10 @@ #define VIDEO_DIP_PORT_C (2 << 29) #define VIDEO_DIP_PORT_D (3 << 29) #define VIDEO_DIP_PORT_MASK (3 << 29) +#define VIDEO_DIP_ENABLE_GCP (1 << 25) #define VIDEO_DIP_ENABLE_AVI (1 << 21) #define VIDEO_DIP_ENABLE_VENDOR (2 << 21) +#define VIDEO_DIP_ENABLE_GAMUT (4 << 21) #define VIDEO_DIP_ENABLE_SPD (8 << 21) #define VIDEO_DIP_SELECT_AVI (0 << 19) #define VIDEO_DIP_SELECT_VENDOR (1 << 19) @@ -1723,7 +1773,11 @@ #define VIDEO_DIP_FREQ_2VSYNC (2 << 16) #define VIDEO_DIP_FREQ_MASK (3 << 16) /* HSW and later: */ +#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20) +#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16) #define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12) +#define VIDEO_DIP_ENABLE_VS_HSW (1 << 8) +#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4) #define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) /* Panel power sequencing */ @@ -1795,18 +1849,35 @@ #define PFIT_AUTO_RATIOS 0x61238 /* Backlight control */ -#define BLC_PWM_CTL 0x61254 -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) #define BLC_PWM_CTL2 0x61250 /* 965+ only */ -#define BLM_COMBINATION_MODE (1 << 30) +#define BLM_PWM_ENABLE (1 << 31) +#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ +#define BLM_PIPE_SELECT (1 << 29) +#define BLM_PIPE_SELECT_IVB (3 << 29) +#define BLM_PIPE_A (0 << 29) +#define BLM_PIPE_B (1 << 29) +#define BLM_PIPE_C (2 << 29) /* ivb + */ +#define BLM_PIPE(pipe) ((pipe) << 29) +#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ +#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) +#define BLM_PHASE_IN_ENABLE (1 << 25) +#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) +#define BLM_PHASE_IN_TIME_BASE_SHIFT (16) +#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) +#define BLM_PHASE_IN_COUNT_SHIFT (8) +#define BLM_PHASE_IN_COUNT_MASK (0xff << 8) +#define BLM_PHASE_IN_INCR_SHIFT (0) +#define BLM_PHASE_IN_INCR_MASK (0xff << 0) +#define BLC_PWM_CTL 0x61254 /* * This is the most significant 15 bits of the number of backlight cycles in a * complete cycle of the modulated backlight control. * * The actual value is this field multiplied by two. */ -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ /* * This is the number of cycles out of the backlight modulation cycle for which * the backlight is on. @@ -1816,9 +1887,24 @@ */ #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) +#define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) +#define BLM_POLARITY_PNV (1 << 0) /* pnv only */ #define BLC_HIST_CTL 0x61260 +/* New registers for PCH-split platforms. Safe where new bits show up, the + * register layout machtes with gen4 BLC_PWM_CTL[12]. */ +#define BLC_PWM_CPU_CTL2 0x48250 +#define BLC_PWM_CPU_CTL 0x48254 + +/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is + * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ +#define BLC_PWM_PCH_CTL1 0xc8250 +#define BLM_PCH_PWM_ENABLE (1 << 31) +#define BLM_PCH_OVERRIDE_ENABLE (1 << 30) +#define BLM_PCH_POLARITY (1 << 29) +#define BLC_PWM_PCH_CTL2 0xc8254 + /* TV port control */ #define TV_CTL 0x68000 /** Enables the TV encoder */ @@ -2583,13 +2669,13 @@ #define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT) #define VLV_DPFLIPSTAT 0x70028 -#define PIPEB_LINE_COMPARE_STATUS (1<<29) +#define PIPEB_LINE_COMPARE_INT_EN (1<<29) #define PIPEB_HLINE_INT_EN (1<<28) #define PIPEB_VBLANK_INT_EN (1<<27) #define SPRITED_FLIPDONE_INT_EN (1<<26) #define SPRITEC_FLIPDONE_INT_EN (1<<25) #define PLANEB_FLIPDONE_INT_EN (1<<24) -#define PIPEA_LINE_COMPARE_STATUS (1<<21) +#define PIPEA_LINE_COMPARE_INT_EN (1<<21) #define PIPEA_HLINE_INT_EN (1<<20) #define PIPEA_VBLANK_INT_EN (1<<19) #define SPRITEB_FLIPDONE_INT_EN (1<<18) @@ -2897,13 +2983,14 @@ #define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE) #define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF) #define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF) +#define DSPLINOFF(plane) DSPADDR(plane) /* Display/Sprite base address macros */ #define DISP_BASEADDR_MASK (0xfffff000) #define I915_LO_DISPBASE(val) (val & ~DISP_BASEADDR_MASK) #define I915_HI_DISPBASE(val) (val & DISP_BASEADDR_MASK) #define I915_MODIFY_DISPBASE(reg, gfx_addr) \ - (I915_WRITE(reg, gfx_addr | I915_LO_DISPBASE(I915_READ(reg)))) + (I915_WRITE((reg), (gfx_addr) | I915_LO_DISPBASE(I915_READ(reg)))) /* VBIOS flags */ #define SWF00 0x71410 @@ -3771,6 +3858,9 @@ #define _FDI_RXA_TUSIZE2 0xf0038 #define _FDI_RXB_TUSIZE1 0xf1030 #define _FDI_RXB_TUSIZE2 0xf1038 +#define FDI_RX_TP1_TO_TP2_48 (2<<20) +#define FDI_RX_TP1_TO_TP2_64 (3<<20) +#define FDI_RX_FDI_DELAY_90 (0x90<<0) #define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC) #define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1) #define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2) @@ -3824,7 +3914,6 @@ #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) /* or SDVOB */ -#define VLV_HDMIB 0x61140 #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) #define TRANSCODER(pipe) ((pipe) << 30) @@ -3855,20 +3944,18 @@ #define PCH_LVDS 0xe1180 #define LVDS_DETECTED (1 << 1) -#define BLC_PWM_CPU_CTL2 0x48250 -#define PWM_ENABLE (1 << 31) -#define PWM_PIPE_A (0 << 29) -#define PWM_PIPE_B (1 << 29) -#define BLC_PWM_CPU_CTL 0x48254 +/* vlv has 2 sets of panel control regs. */ +#define PIPEA_PP_STATUS 0x61200 +#define PIPEA_PP_CONTROL 0x61204 +#define PIPEA_PP_ON_DELAYS 0x61208 +#define PIPEA_PP_OFF_DELAYS 0x6120c +#define PIPEA_PP_DIVISOR 0x61210 -#define BLC_PWM_PCH_CTL1 0xc8250 -#define PWM_PCH_ENABLE (1 << 31) -#define PWM_POLARITY_ACTIVE_LOW (1 << 29) -#define PWM_POLARITY_ACTIVE_HIGH (0 << 29) -#define PWM_POLARITY_ACTIVE_LOW2 (1 << 28) -#define PWM_POLARITY_ACTIVE_HIGH2 (0 << 28) - -#define BLC_PWM_PCH_CTL2 0xc8254 +#define PIPEB_PP_STATUS 0x61300 +#define PIPEB_PP_CONTROL 0x61304 +#define PIPEB_PP_ON_DELAYS 0x61308 +#define PIPEB_PP_OFF_DELAYS 0x6130c +#define PIPEB_PP_DIVISOR 0x61310 #define PCH_PP_STATUS 0xc7200 #define PCH_PP_CONTROL 0xc7204 @@ -3992,6 +4079,7 @@ #define FORCEWAKE 0xA18C #define FORCEWAKE_VLV 0x1300b0 #define FORCEWAKE_ACK_VLV 0x1300b4 +#define FORCEWAKE_ACK_HSW 0x130044 #define FORCEWAKE_ACK 0x130090 #define FORCEWAKE_MT 0xa188 /* multi-threaded */ #define FORCEWAKE_MT_ACK 0x130040 @@ -4012,10 +4100,15 @@ # define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) #define GEN6_UCGCTL2 0x9404 +# define GEN7_VDSUNIT_CLOCK_GATE_DISABLE (1 << 30) +# define GEN7_TDLUNIT_CLOCK_GATE_DISABLE (1 << 22) # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) +#define GEN7_UCGCTL4 0x940c +#define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25) + #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) @@ -4047,6 +4140,7 @@ #define GEN6_RP_UP_IDLE_MIN (0x1<<3) #define GEN6_RP_UP_BUSY_AVG (0x2<<3) #define GEN6_RP_UP_BUSY_CONT (0x4<<3) +#define GEN7_RP_DOWN_IDLE_AVG (0x2<<0) #define GEN6_RP_DOWN_IDLE_CONT (0x1<<0) #define GEN6_RP_UP_THRESHOLD 0xA02C #define GEN6_RP_DOWN_THRESHOLD 0xA030 @@ -4111,6 +4205,26 @@ #define GEN6_RC6 3 #define GEN6_RC7 4 +#define GEN7_MISCCPCTL (0x9424) +#define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0) + +/* IVYBRIDGE DPF */ +#define GEN7_L3CDERRST1 0xB008 /* L3CD Error Status 1 */ +#define GEN7_L3CDERRST1_ROW_MASK (0x7ff<<14) +#define GEN7_PARITY_ERROR_VALID (1<<13) +#define GEN7_L3CDERRST1_BANK_MASK (3<<11) +#define GEN7_L3CDERRST1_SUBBANK_MASK (7<<8) +#define GEN7_PARITY_ERROR_ROW(reg) \ + ((reg & GEN7_L3CDERRST1_ROW_MASK) >> 14) +#define GEN7_PARITY_ERROR_BANK(reg) \ + ((reg & GEN7_L3CDERRST1_BANK_MASK) >> 11) +#define GEN7_PARITY_ERROR_SUBBANK(reg) \ + ((reg & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8) +#define GEN7_L3CDERRST1_ENABLE (1<<7) + +#define GEN7_L3LOG_BASE 0xB070 +#define GEN7_L3LOG_SIZE 0x80 + #define G4X_AUD_VID_DID 0x62020 #define INTEL_AUDIO_DEVCL 0x808629FB #define INTEL_AUDIO_DEVBLC 0x80862801 @@ -4177,7 +4291,7 @@ PIPE_DDI_FUNC_CTL_B) #define PIPE_DDI_FUNC_ENABLE (1<<31) /* Those bits are ignored by pipe EDP since it can only connect to DDI A */ -#define PIPE_DDI_PORT_MASK (0xf<<28) +#define PIPE_DDI_PORT_MASK (7<<28) #define PIPE_DDI_SELECT_PORT(x) ((x)<<28) #define PIPE_DDI_MODE_SELECT_HDMI (0<<24) #define PIPE_DDI_MODE_SELECT_DVI (1<<24) @@ -4335,7 +4449,7 @@ #define PIPE_WM_LINETIME_B 0x45274 #define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \ PIPE_WM_LINETIME_A, \ - PIPE_WM_LINETIME_A) + PIPE_WM_LINETIME_B) #define PIPE_WM_LINETIME_MASK (0x1ff) #define PIPE_WM_LINETIME_TIME(x) ((x)) #define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16) @@ -4347,4 +4461,9 @@ #define SFUSE_STRAP_DDIC_DETECTED (1<<1) #define SFUSE_STRAP_DDID_DETECTED (1<<0) +#define WM_DBG 0x45280 +#define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0) +#define WM_DBG_DISALLOW_MAXFIFO (1<<1) +#define WM_DBG_DISALLOW_SPRITE (1<<2) + #endif /* _I915_REG_H_ */ |