diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 435 |
1 files changed, 230 insertions, 205 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6ec39a86ed06..f1a649990ea9 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -43,102 +43,76 @@ /* Private structure for the integrated LVDS support */ struct intel_lvds { struct intel_encoder base; + + struct edid *edid; + int fitting_mode; u32 pfit_control; u32 pfit_pgm_ratios; + bool pfit_dirty; + + struct drm_display_mode *fixed_mode; }; -static struct intel_lvds *enc_to_intel_lvds(struct drm_encoder *encoder) +static struct intel_lvds *to_intel_lvds(struct drm_encoder *encoder) { - return container_of(enc_to_intel_encoder(encoder), struct intel_lvds, base); -} - -/** - * Sets the backlight level. - * - * \param level backlight level, from 0 to intel_lvds_get_max_backlight(). - */ -static void intel_lvds_set_backlight(struct drm_device *dev, int level) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - u32 blc_pwm_ctl, reg; - - if (HAS_PCH_SPLIT(dev)) - reg = BLC_PWM_CPU_CTL; - else - reg = BLC_PWM_CTL; - - blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK; - I915_WRITE(reg, (blc_pwm_ctl | - (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); + return container_of(encoder, struct intel_lvds, base.base); } -/** - * Returns the maximum level of the backlight duty cycle field. - */ -static u32 intel_lvds_get_max_backlight(struct drm_device *dev) +static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) { - struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg; - - if (HAS_PCH_SPLIT(dev)) - reg = BLC_PWM_PCH_CTL2; - else - reg = BLC_PWM_CTL; - - return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + return container_of(intel_attached_encoder(connector), + struct intel_lvds, base); } /** * Sets the power state for the panel. */ -static void intel_lvds_set_power(struct drm_device *dev, bool on) +static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) { + struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 ctl_reg, status_reg, lvds_reg; + u32 ctl_reg, lvds_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; - status_reg = PCH_PP_STATUS; lvds_reg = PCH_LVDS; } else { ctl_reg = PP_CONTROL; - status_reg = PP_STATUS; lvds_reg = LVDS; } if (on) { I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - POSTING_READ(lvds_reg); - - I915_WRITE(ctl_reg, I915_READ(ctl_reg) | - POWER_TARGET_ON); - if (wait_for(I915_READ(status_reg) & PP_ON, 1000, 0)) - DRM_ERROR("timed out waiting to enable LVDS pipe"); - - intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); + intel_panel_set_backlight(dev, dev_priv->backlight_level); } else { - intel_lvds_set_backlight(dev, 0); + dev_priv->backlight_level = intel_panel_get_backlight(dev); + + intel_panel_set_backlight(dev, 0); + I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) & - ~POWER_TARGET_ON); - if (wait_for((I915_READ(status_reg) & PP_ON) == 0, 1000, 0)) - DRM_ERROR("timed out waiting for LVDS pipe to turn off"); + if (intel_lvds->pfit_control) { + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); + I915_WRITE(PFIT_CONTROL, 0); + intel_lvds->pfit_control = 0; + intel_lvds->pfit_dirty = false; + } I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); - POSTING_READ(lvds_reg); } + POSTING_READ(lvds_reg); } static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) { - struct drm_device *dev = encoder->dev; + struct intel_lvds *intel_lvds = to_intel_lvds(encoder); if (mode == DRM_MODE_DPMS_ON) - intel_lvds_set_power(dev, true); + intel_lvds_set_power(intel_lvds, true); else - intel_lvds_set_power(dev, false); + intel_lvds_set_power(intel_lvds, false); /* XXX: We never power down the LVDS pairs. */ } @@ -146,16 +120,13 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) static int intel_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { - struct drm_device *dev = connector->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode; + struct intel_lvds *intel_lvds = intel_attached_lvds(connector); + struct drm_display_mode *fixed_mode = intel_lvds->fixed_mode; - if (fixed_mode) { - if (mode->hdisplay > fixed_mode->hdisplay) - return MODE_PANEL; - if (mode->vdisplay > fixed_mode->vdisplay) - return MODE_PANEL; - } + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; return MODE_OK; } @@ -223,12 +194,12 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - struct intel_lvds *intel_lvds = enc_to_intel_lvds(encoder); + struct intel_lvds *intel_lvds = to_intel_lvds(encoder); struct drm_encoder *tmp_encoder; u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0; /* Should never happen!! */ - if (!IS_I965G(dev) && intel_crtc->pipe == 0) { + if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) { DRM_ERROR("Can't support LVDS on pipe A\n"); return false; } @@ -241,9 +212,6 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, return false; } } - /* If we don't have a panel mode, there is nothing we can do */ - if (dev_priv->panel_fixed_mode == NULL) - return true; /* * We have timings from the BIOS for the panel, put them in @@ -251,7 +219,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, * with the panel scaling set up to source from the H/VDisplay * of the original mode. */ - intel_fixed_panel_mode(dev_priv->panel_fixed_mode, adjusted_mode); + intel_fixed_panel_mode(intel_lvds->fixed_mode, adjusted_mode); if (HAS_PCH_SPLIT(dev)) { intel_pch_panel_fitting(dev, intel_lvds->fitting_mode, @@ -260,8 +228,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, } /* Make sure pre-965s set dither correctly */ - if (!IS_I965G(dev)) { - if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) + if (INTEL_INFO(dev)->gen < 4) { + if (dev_priv->lvds_dither) pfit_control |= PANEL_8TO6_DITHER_ENABLE; } @@ -271,7 +239,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, goto out; /* 965+ wants fuzzy fitting */ - if (IS_I965G(dev)) + if (INTEL_INFO(dev)->gen >= 4) pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY); @@ -297,7 +265,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, case DRM_MODE_SCALE_ASPECT: /* Scale but preserve the aspect ratio */ - if (IS_I965G(dev)) { + if (INTEL_INFO(dev)->gen >= 4) { u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay; u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay; @@ -356,7 +324,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, * Fortunately this is all done for us in hw. */ pfit_control |= PFIT_ENABLE; - if (IS_I965G(dev)) + if (INTEL_INFO(dev)->gen >= 4) pfit_control |= PFIT_SCALING_AUTO; else pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | @@ -369,8 +337,12 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, } out: - intel_lvds->pfit_control = pfit_control; - intel_lvds->pfit_pgm_ratios = pfit_pgm_ratios; + if (pfit_control != intel_lvds->pfit_control || + pfit_pgm_ratios != intel_lvds->pfit_pgm_ratios) { + intel_lvds->pfit_control = pfit_control; + intel_lvds->pfit_pgm_ratios = pfit_pgm_ratios; + intel_lvds->pfit_dirty = true; + } dev_priv->lvds_border_bits = border; /* @@ -386,30 +358,60 @@ static void intel_lvds_prepare(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg; - - if (HAS_PCH_SPLIT(dev)) - reg = BLC_PWM_CPU_CTL; - else - reg = BLC_PWM_CTL; - - dev_priv->saveBLC_PWM_CTL = I915_READ(reg); - dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & - BACKLIGHT_DUTY_CYCLE_MASK); + struct intel_lvds *intel_lvds = to_intel_lvds(encoder); + + dev_priv->backlight_level = intel_panel_get_backlight(dev); + + /* We try to do the minimum that is necessary in order to unlock + * the registers for mode setting. + * + * On Ironlake, this is quite simple as we just set the unlock key + * and ignore all subtleties. (This may cause some issues...) + * + * Prior to Ironlake, we must disable the pipe if we want to adjust + * the panel fitter. However at all other times we can just reset + * the registers regardless. + */ - intel_lvds_set_power(dev, false); + if (HAS_PCH_SPLIT(dev)) { + I915_WRITE(PCH_PP_CONTROL, + I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS); + } else if (intel_lvds->pfit_dirty) { + I915_WRITE(PP_CONTROL, + (I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS) + & ~POWER_TARGET_ON); + } else { + I915_WRITE(PP_CONTROL, + I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS); + } } -static void intel_lvds_commit( struct drm_encoder *encoder) +static void intel_lvds_commit(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - if (dev_priv->backlight_duty_cycle == 0) - dev_priv->backlight_duty_cycle = - intel_lvds_get_max_backlight(dev); + if (dev_priv->backlight_level == 0) + dev_priv->backlight_level = intel_panel_get_max_backlight(dev); + + /* Undo any unlocking done in prepare to prevent accidental + * adjustment of the registers. + */ + if (HAS_PCH_SPLIT(dev)) { + u32 val = I915_READ(PCH_PP_CONTROL); + if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS) + I915_WRITE(PCH_PP_CONTROL, val & 0x3); + } else { + u32 val = I915_READ(PP_CONTROL); + if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS) + I915_WRITE(PP_CONTROL, val & 0x3); + } - intel_lvds_set_power(dev, true); + /* Always do a full power on as we do not know what state + * we were left in. + */ + intel_lvds_set_power(intel_lvds, true); } static void intel_lvds_mode_set(struct drm_encoder *encoder, @@ -418,7 +420,7 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_lvds *intel_lvds = enc_to_intel_lvds(encoder); + struct intel_lvds *intel_lvds = to_intel_lvds(encoder); /* * The LVDS pin pair will already have been turned on in the @@ -429,13 +431,23 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, if (HAS_PCH_SPLIT(dev)) return; + if (!intel_lvds->pfit_dirty) + return; + /* * Enable automatic panel scaling so that non-native modes fill the * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ + DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", + intel_lvds->pfit_control, + intel_lvds->pfit_pgm_ratios); + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); + I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); + intel_lvds->pfit_dirty = false; } /** @@ -465,38 +477,22 @@ intel_lvds_detect(struct drm_connector *connector, bool force) */ static int intel_lvds_get_modes(struct drm_connector *connector) { + struct intel_lvds *intel_lvds = intel_attached_lvds(connector); struct drm_device *dev = connector->dev; - struct drm_encoder *encoder = intel_attached_encoder(connector); - struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder); - struct drm_i915_private *dev_priv = dev->dev_private; - int ret = 0; - - if (dev_priv->lvds_edid_good) { - ret = intel_ddc_get_modes(connector, intel_encoder->ddc_bus); + struct drm_display_mode *mode; - if (ret) - return ret; + if (intel_lvds->edid) { + drm_mode_connector_update_edid_property(connector, + intel_lvds->edid); + return drm_add_edid_modes(connector, intel_lvds->edid); } - /* Didn't get an EDID, so - * Set wide sync ranges so we get all modes - * handed to valid_mode for checking - */ - connector->display_info.min_vfreq = 0; - connector->display_info.max_vfreq = 200; - connector->display_info.min_hfreq = 0; - connector->display_info.max_hfreq = 200; - - if (dev_priv->panel_fixed_mode != NULL) { - struct drm_display_mode *mode; - - mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); - drm_mode_probed_add(connector, mode); - - return 1; - } + mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode); + if (mode == 0) + return 0; - return 0; + drm_mode_probed_add(connector, mode); + return 1; } static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id) @@ -587,18 +583,17 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { + struct intel_lvds *intel_lvds = intel_attached_lvds(connector); struct drm_device *dev = connector->dev; - if (property == dev->mode_config.scaling_mode_property && - connector->encoder) { - struct drm_crtc *crtc = connector->encoder->crtc; - struct drm_encoder *encoder = connector->encoder; - struct intel_lvds *intel_lvds = enc_to_intel_lvds(encoder); + if (property == dev->mode_config.scaling_mode_property) { + struct drm_crtc *crtc = intel_lvds->base.base.crtc; if (value == DRM_MODE_SCALE_NONE) { DRM_DEBUG_KMS("no scaling not supported\n"); - return 0; + return -EINVAL; } + if (intel_lvds->fitting_mode == value) { /* the LVDS scaling property is not changed */ return 0; @@ -628,7 +623,7 @@ static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { .get_modes = intel_lvds_get_modes, .mode_valid = intel_lvds_mode_valid, - .best_encoder = intel_attached_encoder, + .best_encoder = intel_best_encoder, }; static const struct drm_connector_funcs intel_lvds_connector_funcs = { @@ -726,16 +721,14 @@ static const struct dmi_system_id intel_no_lvds[] = { * Find the reduced downclock for LVDS in EDID. */ static void intel_find_lvds_downclock(struct drm_device *dev, - struct drm_connector *connector) + struct drm_display_mode *fixed_mode, + struct drm_connector *connector) { struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_display_mode *scan, *panel_fixed_mode; + struct drm_display_mode *scan; int temp_downclock; - panel_fixed_mode = dev_priv->panel_fixed_mode; - temp_downclock = panel_fixed_mode->clock; - - mutex_lock(&dev->mode_config.mutex); + temp_downclock = fixed_mode->clock; list_for_each_entry(scan, &connector->probed_modes, head) { /* * If one mode has the same resolution with the fixed_panel @@ -744,14 +737,14 @@ static void intel_find_lvds_downclock(struct drm_device *dev, * case we can set the different FPx0/1 to dynamically select * between low and high frequency. */ - if (scan->hdisplay == panel_fixed_mode->hdisplay && - scan->hsync_start == panel_fixed_mode->hsync_start && - scan->hsync_end == panel_fixed_mode->hsync_end && - scan->htotal == panel_fixed_mode->htotal && - scan->vdisplay == panel_fixed_mode->vdisplay && - scan->vsync_start == panel_fixed_mode->vsync_start && - scan->vsync_end == panel_fixed_mode->vsync_end && - scan->vtotal == panel_fixed_mode->vtotal) { + if (scan->hdisplay == fixed_mode->hdisplay && + scan->hsync_start == fixed_mode->hsync_start && + scan->hsync_end == fixed_mode->hsync_end && + scan->htotal == fixed_mode->htotal && + scan->vdisplay == fixed_mode->vdisplay && + scan->vsync_start == fixed_mode->vsync_start && + scan->vsync_end == fixed_mode->vsync_end && + scan->vtotal == fixed_mode->vtotal) { if (scan->clock < temp_downclock) { /* * The downclock is already found. But we @@ -761,17 +754,14 @@ static void intel_find_lvds_downclock(struct drm_device *dev, } } } - mutex_unlock(&dev->mode_config.mutex); - if (temp_downclock < panel_fixed_mode->clock && - i915_lvds_downclock) { + if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) { /* We found the downclock for LVDS. */ dev_priv->lvds_downclock_avail = 1; dev_priv->lvds_downclock = temp_downclock; DRM_DEBUG_KMS("LVDS downclock is found in EDID. " - "Normal clock %dKhz, downclock %dKhz\n", - panel_fixed_mode->clock, temp_downclock); + "Normal clock %dKhz, downclock %dKhz\n", + fixed_mode->clock, temp_downclock); } - return; } /* @@ -780,38 +770,67 @@ static void intel_find_lvds_downclock(struct drm_device *dev, * If it is present, return 1. * If it is not present, return false. * If no child dev is parsed from VBT, it assumes that the LVDS is present. - * Note: The addin_offset should also be checked for LVDS panel. - * Only when it is non-zero, it is assumed that it is present. */ -static int lvds_is_present_in_vbt(struct drm_device *dev) +static bool lvds_is_present_in_vbt(struct drm_device *dev, + u8 *i2c_pin) { struct drm_i915_private *dev_priv = dev->dev_private; - struct child_device_config *p_child; - int i, ret; + int i; if (!dev_priv->child_dev_num) - return 1; + return true; - ret = 0; for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; - /* - * If the device type is not LFP, continue. - * If the device type is 0x22, it is also regarded as LFP. + struct child_device_config *child = dev_priv->child_dev + i; + + /* If the device type is not LFP, continue. + * We have to check both the new identifiers as well as the + * old for compatibility with some BIOSes. */ - if (p_child->device_type != DEVICE_TYPE_INT_LFP && - p_child->device_type != DEVICE_TYPE_LFP) + if (child->device_type != DEVICE_TYPE_INT_LFP && + child->device_type != DEVICE_TYPE_LFP) continue; - /* The addin_offset should be checked. Only when it is - * non-zero, it is regarded as present. + if (child->i2c_pin) + *i2c_pin = child->i2c_pin; + + /* However, we cannot trust the BIOS writers to populate + * the VBT correctly. Since LVDS requires additional + * information from AIM blocks, a non-zero addin offset is + * a good indicator that the LVDS is actually present. */ - if (p_child->addin_offset) { - ret = 1; - break; - } + if (child->addin_offset) + return true; + + /* But even then some BIOS writers perform some black magic + * and instantiate the device without reference to any + * additional data. Trust that if the VBT was written into + * the OpRegion then they have validated the LVDS's existence. + */ + if (dev_priv->opregion.vbt) + return true; } - return ret; + + return false; +} + +static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u8 buf = 0; + struct i2c_msg msgs[] = { + { + .addr = 0xA0, + .flags = 0, + .len = 1, + .buf = &buf, + }, + }; + struct i2c_adapter *i2c = &dev_priv->gmbus[pin].adapter; + /* XXX this only appears to work when using GMBUS */ + if (intel_gmbus_is_forced_bit(i2c)) + return true; + return i2c_transfer(i2c, msgs, 1) == 1; } /** @@ -832,13 +851,15 @@ void intel_lvds_init(struct drm_device *dev) struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; u32 lvds; - int pipe, gpio = GPIOC; + int pipe; + u8 pin; /* Skip init on machines we know falsely report LVDS */ if (dmi_check_system(intel_no_lvds)) return; - if (!lvds_is_present_in_vbt(dev)) { + pin = GMBUS_PORT_PANEL; + if (!lvds_is_present_in_vbt(dev, &pin)) { DRM_DEBUG_KMS("LVDS is not present in VBT\n"); return; } @@ -846,11 +867,15 @@ void intel_lvds_init(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) return; - if (dev_priv->edp_support) { + if (dev_priv->edp.support) { DRM_DEBUG_KMS("disable LVDS for eDP support\n"); return; } - gpio = PCH_GPIOC; + } + + if (!intel_lvds_ddc_probe(dev, pin)) { + DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n"); + return; } intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL); @@ -864,16 +889,20 @@ void intel_lvds_init(struct drm_device *dev) return; } + if (!HAS_PCH_SPLIT(dev)) { + intel_lvds->pfit_control = I915_READ(PFIT_CONTROL); + } + intel_encoder = &intel_lvds->base; - encoder = &intel_encoder->enc; + encoder = &intel_encoder->base; connector = &intel_connector->base; drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs, DRM_MODE_CONNECTOR_LVDS); - drm_encoder_init(dev, &intel_encoder->enc, &intel_lvds_enc_funcs, + drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS); - drm_mode_connector_attach_encoder(&intel_connector->base, &intel_encoder->enc); + intel_connector_attach_encoder(intel_connector, intel_encoder); intel_encoder->type = INTEL_OUTPUT_LVDS; intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT); @@ -904,43 +933,41 @@ void intel_lvds_init(struct drm_device *dev) * if closed, act like it's not there for now */ - /* Set up the DDC bus. */ - intel_encoder->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C"); - if (!intel_encoder->ddc_bus) { - dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " - "failed.\n"); - goto failed; - } - /* * Attempt to get the fixed panel mode from DDC. Assume that the * preferred mode is the right one. */ - dev_priv->lvds_edid_good = true; + intel_lvds->edid = drm_get_edid(connector, + &dev_priv->gmbus[pin].adapter); - if (!intel_ddc_get_modes(connector, intel_encoder->ddc_bus)) - dev_priv->lvds_edid_good = false; + if (!intel_lvds->edid) { + /* Didn't get an EDID, so + * Set wide sync ranges so we get all modes + * handed to valid_mode for checking + */ + connector->display_info.min_vfreq = 0; + connector->display_info.max_vfreq = 200; + connector->display_info.min_hfreq = 0; + connector->display_info.max_hfreq = 200; + } list_for_each_entry(scan, &connector->probed_modes, head) { - mutex_lock(&dev->mode_config.mutex); if (scan->type & DRM_MODE_TYPE_PREFERRED) { - dev_priv->panel_fixed_mode = + intel_lvds->fixed_mode = drm_mode_duplicate(dev, scan); - mutex_unlock(&dev->mode_config.mutex); - intel_find_lvds_downclock(dev, connector); + intel_find_lvds_downclock(dev, + intel_lvds->fixed_mode, + connector); goto out; } - mutex_unlock(&dev->mode_config.mutex); } /* Failed to get EDID, what about VBT? */ if (dev_priv->lfp_lvds_vbt_mode) { - mutex_lock(&dev->mode_config.mutex); - dev_priv->panel_fixed_mode = + intel_lvds->fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); - mutex_unlock(&dev->mode_config.mutex); - if (dev_priv->panel_fixed_mode) { - dev_priv->panel_fixed_mode->type |= + if (intel_lvds->fixed_mode) { + intel_lvds->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; goto out; } @@ -958,19 +985,19 @@ void intel_lvds_init(struct drm_device *dev) lvds = I915_READ(LVDS); pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; - crtc = intel_get_crtc_from_pipe(dev, pipe); + crtc = intel_get_crtc_for_pipe(dev, pipe); if (crtc && (lvds & LVDS_PORT_EN)) { - dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc); - if (dev_priv->panel_fixed_mode) { - dev_priv->panel_fixed_mode->type |= + intel_lvds->fixed_mode = intel_crtc_mode_get(dev, crtc); + if (intel_lvds->fixed_mode) { + intel_lvds->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; goto out; } } /* If we still don't have a mode after all that, give up. */ - if (!dev_priv->panel_fixed_mode) + if (!intel_lvds->fixed_mode) goto failed; out: @@ -997,8 +1024,6 @@ out: failed: DRM_DEBUG_KMS("No LVDS modes found, disabling.\n"); - if (intel_encoder->ddc_bus) - intel_i2c_destroy(intel_encoder->ddc_bus); drm_connector_cleanup(connector); drm_encoder_cleanup(encoder); kfree(intel_lvds); |