5 files changed, 42 insertions, 25 deletions

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 32d24c69da3c..704ddb4d3ca7 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)
 	return 0;
 }
 
+static int skl_dpll0_vco(struct intel_atomic_state *intel_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev);
+	struct intel_crtc *crtc;
+	struct intel_crtc_state *crtc_state;
+	int vco, i;
+
+	vco = intel_state->cdclk.logical.vco;
+	if (!vco)
+		vco = dev_priv->skl_preferred_vco_freq;
+
+	for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
+		if (!crtc_state->base.enable)
+			continue;
+
+		if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
+			continue;
+
+		/*
+		 * DPLL0 VCO may need to be adjusted to get the correct
+		 * clock for eDP. This will affect cdclk as well.
+		 */
+		switch (crtc_state->port_clock / 2) {
+		case 108000:
+		case 216000:
+			vco = 8640000;
+			break;
+		default:
+			vco = 8100000;
+			break;
+		}
+	}
+
+	return vco;
+}
+
 static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
 {
-	struct drm_i915_private *dev_priv = to_i915(state->dev);
 	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
 	int min_cdclk, cdclk, vco;
 
@@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
 	if (min_cdclk < 0)
 		return min_cdclk;
 
-	vco = intel_state->cdclk.logical.vco;
-	if (!vco)
-		vco = dev_priv->skl_preferred_vco_freq;
+	vco = skl_dpll0_vco(intel_state);
 
 	/*
 	 * FIXME should also account for plane ratio
diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
index 41e6c75a7f3c..f9550ea46c26 100644
--- a/drivers/gpu/drm/i915/intel_csr.c
+++ b/drivers/gpu/drm/i915/intel_csr.c
@@ -35,6 +35,7 @@
  */
 
 #define I915_CSR_GLK "i915/glk_dmc_ver1_04.bin"
+MODULE_FIRMWARE(I915_CSR_GLK);
 #define GLK_CSR_VERSION_REQUIRED	CSR_VERSION(1, 4)
 
 #define I915_CSR_CNL "i915/cnl_dmc_ver1_07.bin"
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3b48fd2561fe..56004ffbd8bb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15178,6 +15178,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
 		if (crtc_state->base.active) {
 			intel_mode_from_pipe_config(&crtc->base.mode, crtc_state);
+			crtc->base.mode.hdisplay = crtc_state->pipe_src_w;
+			crtc->base.mode.vdisplay = crtc_state->pipe_src_h;
 			intel_mode_from_pipe_config(&crtc_state->base.adjusted_mode, crtc_state);
 			WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9a4a51e79fa1..b7b4cfdeb974 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1881,26 +1881,6 @@ found:
 				reduce_m_n);
 	}
 
-	/*
-	 * DPLL0 VCO may need to be adjusted to get the correct
-	 * clock for eDP. This will affect cdclk as well.
-	 */
-	if (intel_dp_is_edp(intel_dp) && IS_GEN9_BC(dev_priv)) {
-		int vco;
-
-		switch (pipe_config->port_clock / 2) {
-		case 108000:
-		case 216000:
-			vco = 8640000;
-			break;
-		default:
-			vco = 8100000;
-			break;
-		}
-
-		to_intel_atomic_state(pipe_config->base.state)->cdclk.logical.vco = vco;
-	}
-
 	if (!HAS_DDI(dev_priv))
 		intel_dp_set_clock(encoder, pipe_config);
 
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index d35d2d50f595..8691c86f579c 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -326,7 +326,8 @@ static void intel_enable_lvds(struct intel_encoder *encoder,
 
 	I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) | PANEL_POWER_ON);
 	POSTING_READ(lvds_encoder->reg);
-	if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 1000))
+
+	if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 5000))
 		DRM_ERROR("timed out waiting for panel to power on\n");
 
 	intel_panel_enable_backlight(pipe_config, conn_state);