1 files changed, 448 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
new file mode 100644
index 000000000000..77593533abcd
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Authors: Philippe Cornu <philippe.cornu@st.com>
+ *          Yannick Fertre <yannick.fertre@st.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+/*** Manufacturer Command Set ***/
+#define MCS_CMD_MODE_SW		0xFE /* CMD Mode Switch */
+#define MCS_CMD1_UCS		0x00 /* User Command Set (UCS = CMD1) */
+#define MCS_CMD2_P0		0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
+#define MCS_CMD2_P1		0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
+#define MCS_CMD2_P2		0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
+#define MCS_CMD2_P3		0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
+
+/* CMD2 P0 commands (Display Options and Power) */
+#define MCS_STBCTR		0x12 /* TE1 Output Setting Zig-Zag Connection */
+#define MCS_SGOPCTR		0x16 /* Source Bias Current */
+#define MCS_SDCTR		0x1A /* Source Output Delay Time */
+#define MCS_INVCTR		0x1B /* Inversion Type */
+#define MCS_EXT_PWR_IC		0x24 /* External PWR IC Control */
+#define MCS_SETAVDD		0x27 /* PFM Control for AVDD Output */
+#define MCS_SETAVEE		0x29 /* PFM Control for AVEE Output */
+#define MCS_BT2CTR		0x2B /* DDVDL Charge Pump Control */
+#define MCS_BT3CTR		0x2F /* VGH Charge Pump Control */
+#define MCS_BT4CTR		0x34 /* VGL Charge Pump Control */
+#define MCS_VCMCTR		0x46 /* VCOM Output Level Control */
+#define MCS_SETVGN		0x52 /* VG M/S N Control */
+#define MCS_SETVGP		0x54 /* VG M/S P Control */
+#define MCS_SW_CTRL		0x5F /* Interface Control for PFM and MIPI */
+
+/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
+#define GOA_VSTV1		0x00
+#define GOA_VSTV2		0x07
+#define GOA_VCLK1		0x0E
+#define GOA_VCLK2		0x17
+#define GOA_VCLK_OPT1		0x20
+#define GOA_BICLK1		0x2A
+#define GOA_BICLK2		0x37
+#define GOA_BICLK3		0x44
+#define GOA_BICLK4		0x4F
+#define GOA_BICLK_OPT1		0x5B
+#define GOA_BICLK_OPT2		0x60
+#define MCS_GOA_GPO1		0x6D
+#define MCS_GOA_GPO2		0x71
+#define MCS_GOA_EQ		0x74
+#define MCS_GOA_CLK_GALLON	0x7C
+#define MCS_GOA_FS_SEL0		0x7E
+#define MCS_GOA_FS_SEL1		0x87
+#define MCS_GOA_FS_SEL2		0x91
+#define MCS_GOA_FS_SEL3		0x9B
+#define MCS_GOA_BS_SEL0		0xAC
+#define MCS_GOA_BS_SEL1		0xB5
+#define MCS_GOA_BS_SEL2		0xBF
+#define MCS_GOA_BS_SEL3		0xC9
+#define MCS_GOA_BS_SEL4		0xD3
+
+/* CMD2 P3 commands (Gamma) */
+#define MCS_GAMMA_VP		0x60 /* Gamma VP1~VP16 */
+#define MCS_GAMMA_VN		0x70 /* Gamma VN1~VN16 */
+
+struct rm68200 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct gpio_desc *reset_gpio;
+	struct regulator *supply;
+	struct backlight_device *backlight;
+	bool prepared;
+	bool enabled;
+};
+
+static const struct drm_display_mode default_mode = {
+	.clock = 52582,
+	.hdisplay = 720,
+	.hsync_start = 720 + 38,
+	.hsync_end = 720 + 38 + 8,
+	.htotal = 720 + 38 + 8 + 38,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 12,
+	.vsync_end = 1280 + 12 + 4,
+	.vtotal = 1280 + 12 + 4 + 12,
+	.vrefresh = 50,
+	.flags = 0,
+	.width_mm = 68,
+	.height_mm = 122,
+};
+
+static inline struct rm68200 *panel_to_rm68200(struct drm_panel *panel)
+{
+	return container_of(panel, struct rm68200, panel);
+}
+
+static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data,
+				  size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	err = mipi_dsi_dcs_write_buffer(dsi, data, len);
+	if (err < 0)
+		DRM_ERROR_RATELIMITED("MIPI DSI DCS write buffer failed: %d\n",
+				      err);
+}
+
+static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int err;
+
+	err = mipi_dsi_dcs_write(dsi, cmd, &value, 1);
+	if (err < 0)
+		DRM_ERROR_RATELIMITED("MIPI DSI DCS write failed: %d\n", err);
+}
+
+#define dcs_write_seq(ctx, seq...)				\
+({								\
+	static const u8 d[] = { seq };				\
+								\
+	rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d));		\
+})
+
+/*
+ * This panel is not able to auto-increment all cmd addresses so for some of
+ * them, we need to send them one by one...
+ */
+#define dcs_write_cmd_seq(ctx, cmd, seq...)			\
+({								\
+	static const u8 d[] = { seq };				\
+	unsigned int i;						\
+								\
+	for (i = 0; i < ARRAY_SIZE(d) ; i++)			\
+		rm68200_dcs_write_cmd(ctx, cmd + i, d[i]);	\
+})
+
+static void rm68200_init_sequence(struct rm68200 *ctx)
+{
+	/* Enter CMD2 with page 0 */
+	dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P0);
+	dcs_write_cmd_seq(ctx, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
+	dcs_write_seq(ctx, MCS_BT2CTR, 0xE5);
+	dcs_write_seq(ctx, MCS_SETAVDD, 0x0A);
+	dcs_write_seq(ctx, MCS_SETAVEE, 0x0A);
+	dcs_write_seq(ctx, MCS_SGOPCTR, 0x52);
+	dcs_write_seq(ctx, MCS_BT3CTR, 0x53);
+	dcs_write_seq(ctx, MCS_BT4CTR, 0x5A);
+	dcs_write_seq(ctx, MCS_INVCTR, 0x00);
+	dcs_write_seq(ctx, MCS_STBCTR, 0x0A);
+	dcs_write_seq(ctx, MCS_SDCTR, 0x06);
+	dcs_write_seq(ctx, MCS_VCMCTR, 0x56);
+	dcs_write_seq(ctx, MCS_SETVGN, 0xA0, 0x00);
+	dcs_write_seq(ctx, MCS_SETVGP, 0xA0, 0x00);
+	dcs_write_seq(ctx, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
+
+	dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P2);
+	dcs_write_seq(ctx, GOA_VSTV1, 0x05);
+	dcs_write_seq(ctx, 0x02, 0x0B);
+	dcs_write_seq(ctx, 0x03, 0x0F);
+	dcs_write_seq(ctx, 0x04, 0x7D, 0x00, 0x50);
+	dcs_write_cmd_seq(ctx, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
+			  0x50);
+	dcs_write_cmd_seq(ctx, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
+			  0x00, 0x85, 0x08);
+	dcs_write_cmd_seq(ctx, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
+			  0x00, 0x85, 0x08);
+	dcs_write_seq(ctx, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_seq(ctx, GOA_BICLK1, 0x07, 0x08);
+	dcs_write_seq(ctx, 0x2D, 0x01);
+	dcs_write_seq(ctx, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
+		      0x00);
+	dcs_write_cmd_seq(ctx, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
+	dcs_write_seq(ctx, 0x3D, 0x40);
+	dcs_write_seq(ctx, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
+	dcs_write_seq(ctx, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(ctx, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00);
+	dcs_write_seq(ctx, 0x58, 0x00, 0x00, 0x00);
+	dcs_write_seq(ctx, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(ctx, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(ctx, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(ctx, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
+	dcs_write_seq(ctx, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+		      0x00, 0x00);
+	dcs_write_seq(ctx, MCS_GOA_CLK_GALLON, 0x00, 0x00);
+	dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
+			  0x16, 0x12, 0x08, 0x3F);
+	dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
+			  0x0A, 0x0E, 0x3F, 0x3F, 0x00);
+	dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
+			  0x05, 0x01, 0x3F, 0x3F, 0x0F);
+	dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
+			  0x3F);
+	dcs_write_cmd_seq(ctx, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
+	dcs_write_cmd_seq(ctx, 0xA9, 0x07, 0x03, 0x3F);
+	dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
+			  0x15, 0x11, 0x0F, 0x3F);
+	dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
+			  0x0D, 0x09, 0x3F, 0x3F, 0x07);
+	dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
+			  0x02, 0x06, 0x3F, 0x3F, 0x08);
+	dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
+			  0x3F, 0x3F, 0x0E, 0x10, 0x14);
+	dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
+	dcs_write_seq(ctx, 0xDC, 0x02);
+	dcs_write_seq(ctx, 0xDE, 0x12);
+
+	dcs_write_seq(ctx, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
+	dcs_write_seq(ctx, 0x01, 0x75);
+
+	dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P3);
+	dcs_write_cmd_seq(ctx, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+			  0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+			  0x12, 0x0C, 0x00);
+	dcs_write_cmd_seq(ctx, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+			  0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+			  0x12, 0x0C, 0x00);
+
+	/* Exit CMD2 */
+	dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
+}
+
+static int rm68200_disable(struct drm_panel *panel)
+{
+	struct rm68200 *ctx = panel_to_rm68200(panel);
+
+	if (!ctx->enabled)
+		return 0;
+
+	backlight_disable(ctx->backlight);
+
+	ctx->enabled = false;
+
+	return 0;
+}
+
+static int rm68200_unprepare(struct drm_panel *panel)
+{
+	struct rm68200 *ctx = panel_to_rm68200(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret)
+		DRM_WARN("failed to set display off: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret)
+		DRM_WARN("failed to enter sleep mode: %d\n", ret);
+
+	msleep(120);
+
+	if (ctx->reset_gpio) {
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		msleep(20);
+	}
+
+	regulator_disable(ctx->supply);
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int rm68200_prepare(struct drm_panel *panel)
+{
+	struct rm68200 *ctx = panel_to_rm68200(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0) {
+		DRM_ERROR("failed to enable supply: %d\n", ret);
+		return ret;
+	}
+
+	if (ctx->reset_gpio) {
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		msleep(20);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+		msleep(100);
+	}
+
+	rm68200_init_sequence(ctx);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret)
+		return ret;
+
+	msleep(125);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+
+	msleep(20);
+
+	ctx->prepared = true;
+
+	return 0;
+}
+
+static int rm68200_enable(struct drm_panel *panel)
+{
+	struct rm68200 *ctx = panel_to_rm68200(panel);
+
+	if (ctx->enabled)
+		return 0;
+
+	backlight_enable(ctx->backlight);
+
+	ctx->enabled = true;
+
+	return 0;
+}
+
+static int rm68200_get_modes(struct drm_panel *panel)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+			  default_mode.hdisplay, default_mode.vdisplay,
+			  default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = mode->width_mm;
+	panel->connector->display_info.height_mm = mode->height_mm;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs rm68200_drm_funcs = {
+	.disable = rm68200_disable,
+	.unprepare = rm68200_unprepare,
+	.prepare = rm68200_prepare,
+	.enable = rm68200_enable,
+	.get_modes = rm68200_get_modes,
+};
+
+static int rm68200_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct rm68200 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		ret = PTR_ERR(ctx->reset_gpio);
+		dev_err(dev, "cannot get reset GPIO: %d\n", ret);
+		return ret;
+	}
+
+	ctx->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		dev_err(dev, "cannot get regulator: %d\n", ret);
+		return ret;
+	}
+
+	ctx->backlight = devm_of_find_backlight(dev);
+	if (IS_ERR(ctx->backlight))
+		return PTR_ERR(ctx->backlight);
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 2;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_LPM;
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &rm68200_drm_funcs;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach() failed: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rm68200_remove(struct mipi_dsi_device *dsi)
+{
+	struct rm68200 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id raydium_rm68200_of_match[] = {
+	{ .compatible = "raydium,rm68200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, raydium_rm68200_of_match);
+
+static struct mipi_dsi_driver raydium_rm68200_driver = {
+	.probe = rm68200_probe,
+	.remove = rm68200_remove,
+	.driver = {
+		.name = "panel-raydium-rm68200",
+		.of_match_table = raydium_rm68200_of_match,
+	},
+};
+module_mipi_dsi_driver(raydium_rm68200_driver);
+
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
+MODULE_DESCRIPTION("DRM Driver for Raydium RM68200 MIPI DSI panel");
+MODULE_LICENSE("GPL v2");