diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/atombios.h')
| -rw-r--r-- | drivers/gpu/drm/radeon/atombios.h | 4785 |
1 files changed, 4785 insertions, 0 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h new file mode 100644 index 000000000000..cf67928abbc8 --- /dev/null +++ b/drivers/gpu/drm/radeon/atombios.h @@ -0,0 +1,4785 @@ +/* + * Copyright 2006-2007 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/****************************************************************************/ +/*Portion I: Definitions shared between VBIOS and Driver */ +/****************************************************************************/ + +#ifndef _ATOMBIOS_H +#define _ATOMBIOS_H + +#define ATOM_VERSION_MAJOR 0x00020000 +#define ATOM_VERSION_MINOR 0x00000002 + +#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR) + +/* Endianness should be specified before inclusion, + * default to little endian + */ +#ifndef ATOM_BIG_ENDIAN +#error Endian not specified +#endif + +#ifdef _H2INC +#ifndef ULONG +typedef unsigned long ULONG; +#endif + +#ifndef UCHAR +typedef unsigned char UCHAR; +#endif + +#ifndef USHORT +typedef unsigned short USHORT; +#endif +#endif + +#define ATOM_DAC_A 0 +#define ATOM_DAC_B 1 +#define ATOM_EXT_DAC 2 + +#define ATOM_CRTC1 0 +#define ATOM_CRTC2 1 + +#define ATOM_DIGA 0 +#define ATOM_DIGB 1 + +#define ATOM_PPLL1 0 +#define ATOM_PPLL2 1 + +#define ATOM_SCALER1 0 +#define ATOM_SCALER2 1 + +#define ATOM_SCALER_DISABLE 0 +#define ATOM_SCALER_CENTER 1 +#define ATOM_SCALER_EXPANSION 2 +#define ATOM_SCALER_MULTI_EX 3 + +#define ATOM_DISABLE 0 +#define ATOM_ENABLE 1 +#define ATOM_LCD_BLOFF (ATOM_DISABLE+2) +#define ATOM_LCD_BLON (ATOM_ENABLE+2) +#define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3) +#define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5) +#define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5) +#define ATOM_ENCODER_INIT (ATOM_DISABLE+7) + +#define ATOM_BLANKING 1 +#define ATOM_BLANKING_OFF 0 + +#define ATOM_CURSOR1 0 +#define ATOM_CURSOR2 1 + +#define ATOM_ICON1 0 +#define ATOM_ICON2 1 + +#define ATOM_CRT1 0 +#define ATOM_CRT2 1 + +#define ATOM_TV_NTSC 1 +#define ATOM_TV_NTSCJ 2 +#define ATOM_TV_PAL 3 +#define ATOM_TV_PALM 4 +#define ATOM_TV_PALCN 5 +#define ATOM_TV_PALN 6 +#define ATOM_TV_PAL60 7 +#define ATOM_TV_SECAM 8 +#define ATOM_TV_CV 16 + +#define ATOM_DAC1_PS2 1 +#define ATOM_DAC1_CV 2 +#define ATOM_DAC1_NTSC 3 +#define ATOM_DAC1_PAL 4 + +#define ATOM_DAC2_PS2 ATOM_DAC1_PS2 +#define ATOM_DAC2_CV ATOM_DAC1_CV +#define ATOM_DAC2_NTSC ATOM_DAC1_NTSC +#define ATOM_DAC2_PAL ATOM_DAC1_PAL + +#define ATOM_PM_ON 0 +#define ATOM_PM_STANDBY 1 +#define ATOM_PM_SUSPEND 2 +#define ATOM_PM_OFF 3 + +/* Bit0:{=0:single, =1:dual}, + Bit1 {=0:666RGB, =1:888RGB}, + Bit2:3:{Grey level} + Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/ + +#define ATOM_PANEL_MISC_DUAL 0x00000001 +#define ATOM_PANEL_MISC_888RGB 0x00000002 +#define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C +#define ATOM_PANEL_MISC_FPDI 0x00000010 +#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2 +#define ATOM_PANEL_MISC_SPATIAL 0x00000020 +#define ATOM_PANEL_MISC_TEMPORAL 0x00000040 +#define ATOM_PANEL_MISC_API_ENABLED 0x00000080 + +#define MEMTYPE_DDR1 "DDR1" +#define MEMTYPE_DDR2 "DDR2" +#define MEMTYPE_DDR3 "DDR3" +#define MEMTYPE_DDR4 "DDR4" + +#define ASIC_BUS_TYPE_PCI "PCI" +#define ASIC_BUS_TYPE_AGP "AGP" +#define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS" + +/* Maximum size of that FireGL flag string */ + +#define ATOM_FIREGL_FLAG_STRING "FGL" /* Flag used to enable FireGL Support */ +#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 /* sizeof( ATOM_FIREGL_FLAG_STRING ) */ + +#define ATOM_FAKE_DESKTOP_STRING "DSK" /* Flag used to enable mobile ASIC on Desktop */ +#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING + +#define ATOM_M54T_FLAG_STRING "M54T" /* Flag used to enable M54T Support */ +#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 /* sizeof( ATOM_M54T_FLAG_STRING ) */ + +#define HW_ASSISTED_I2C_STATUS_FAILURE 2 +#define HW_ASSISTED_I2C_STATUS_SUCCESS 1 + +#pragma pack(1) /* BIOS data must use byte aligment */ + +/* Define offset to location of ROM header. */ + +#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L +#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L + +#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94 +#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */ +#define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f +#define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e + +/* Common header for all ROM Data tables. + Every table pointed _ATOM_MASTER_DATA_TABLE has this common header. + And the pointer actually points to this header. */ + +typedef struct _ATOM_COMMON_TABLE_HEADER { + USHORT usStructureSize; + UCHAR ucTableFormatRevision; /*Change it when the Parser is not backward compatible */ + UCHAR ucTableContentRevision; /*Change it only when the table needs to change but the firmware */ + /*Image can't be updated, while Driver needs to carry the new table! */ +} ATOM_COMMON_TABLE_HEADER; + +typedef struct _ATOM_ROM_HEADER { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios, + atombios should init it as "ATOM", don't change the position */ + USHORT usBiosRuntimeSegmentAddress; + USHORT usProtectedModeInfoOffset; + USHORT usConfigFilenameOffset; + USHORT usCRC_BlockOffset; + USHORT usBIOS_BootupMessageOffset; + USHORT usInt10Offset; + USHORT usPciBusDevInitCode; + USHORT usIoBaseAddress; + USHORT usSubsystemVendorID; + USHORT usSubsystemID; + USHORT usPCI_InfoOffset; + USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */ + USHORT usMasterDataTableOffset; /*Offset for SW to get all data table offsets, Don't change the position */ + UCHAR ucExtendedFunctionCode; + UCHAR ucReserved; +} ATOM_ROM_HEADER; + +/*==============================Command Table Portion==================================== */ + +#ifdef UEFI_BUILD +#define UTEMP USHORT +#define USHORT void* +#endif + +typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES { + USHORT ASIC_Init; /* Function Table, used by various SW components,latest version 1.1 */ + USHORT GetDisplaySurfaceSize; /* Atomic Table, Used by Bios when enabling HW ICON */ + USHORT ASIC_RegistersInit; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */ + USHORT VRAM_BlockVenderDetection; /* Atomic Table, used only by Bios */ + USHORT DIGxEncoderControl; /* Only used by Bios */ + USHORT MemoryControllerInit; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */ + USHORT EnableCRTCMemReq; /* Function Table,directly used by various SW components,latest version 2.1 */ + USHORT MemoryParamAdjust; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed */ + USHORT DVOEncoderControl; /* Function Table,directly used by various SW components,latest version 1.2 */ + USHORT GPIOPinControl; /* Atomic Table, only used by Bios */ + USHORT SetEngineClock; /*Function Table,directly used by various SW components,latest version 1.1 */ + USHORT SetMemoryClock; /* Function Table,directly used by various SW components,latest version 1.1 */ + USHORT SetPixelClock; /*Function Table,directly used by various SW components,latest version 1.2 */ + USHORT DynamicClockGating; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */ + USHORT ResetMemoryDLL; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */ + USHORT ResetMemoryDevice; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */ + USHORT MemoryPLLInit; + USHORT AdjustDisplayPll; /* only used by Bios */ + USHORT AdjustMemoryController; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */ + USHORT EnableASIC_StaticPwrMgt; /* Atomic Table, only used by Bios */ + USHORT ASIC_StaticPwrMgtStatusChange; /* Obsolete, only used by Bios */ + USHORT DAC_LoadDetection; /* Atomic Table, directly used by various SW components,latest version 1.2 */ + USHORT LVTMAEncoderControl; /* Atomic Table,directly used by various SW components,latest version 1.3 */ + USHORT LCD1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT DAC1EncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT DAC2EncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT DVOOutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT CV1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT GetConditionalGoldenSetting; /* only used by Bios */ + USHORT TVEncoderControl; /* Function Table,directly used by various SW components,latest version 1.1 */ + USHORT TMDSAEncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.3 */ + USHORT LVDSEncoderControl; /* Atomic Table, directly used by various SW components,latest version 1.3 */ + USHORT TV1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT EnableScaler; /* Atomic Table, used only by Bios */ + USHORT BlankCRTC; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT EnableCRTC; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT GetPixelClock; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT EnableVGA_Render; /* Function Table,directly used by various SW components,latest version 1.1 */ + USHORT EnableVGA_Access; /* Obsolete , only used by Bios */ + USHORT SetCRTC_Timing; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT SetCRTC_OverScan; /* Atomic Table, used by various SW components,latest version 1.1 */ + USHORT SetCRTC_Replication; /* Atomic Table, used only by Bios */ + USHORT SelectCRTC_Source; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT EnableGraphSurfaces; /* Atomic Table, used only by Bios */ + USHORT UpdateCRTC_DoubleBufferRegisters; + USHORT LUT_AutoFill; /* Atomic Table, only used by Bios */ + USHORT EnableHW_IconCursor; /* Atomic Table, only used by Bios */ + USHORT GetMemoryClock; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT GetEngineClock; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT SetCRTC_UsingDTDTiming; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT ExternalEncoderControl; /* Atomic Table, directly used by various SW components,latest version 2.1 */ + USHORT LVTMAOutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT VRAM_BlockDetectionByStrap; /* Atomic Table, used only by Bios */ + USHORT MemoryCleanUp; /* Atomic Table, only used by Bios */ + USHORT ProcessI2cChannelTransaction; /* Function Table,only used by Bios */ + USHORT WriteOneByteToHWAssistedI2C; /* Function Table,indirectly used by various SW components */ + USHORT ReadHWAssistedI2CStatus; /* Atomic Table, indirectly used by various SW components */ + USHORT SpeedFanControl; /* Function Table,indirectly used by various SW components,called from ASIC_Init */ + USHORT PowerConnectorDetection; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT MC_Synchronization; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */ + USHORT ComputeMemoryEnginePLL; /* Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock */ + USHORT MemoryRefreshConversion; /* Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock */ + USHORT VRAM_GetCurrentInfoBlock; /* Atomic Table, used only by Bios */ + USHORT DynamicMemorySettings; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */ + USHORT MemoryTraining; /* Atomic Table, used only by Bios */ + USHORT EnableSpreadSpectrumOnPPLL; /* Atomic Table, directly used by various SW components,latest version 1.2 */ + USHORT TMDSAOutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT SetVoltage; /* Function Table,directly and/or indirectly used by various SW components,latest version 1.1 */ + USHORT DAC1OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT DAC2OutputControl; /* Atomic Table, directly used by various SW components,latest version 1.1 */ + USHORT SetupHWAssistedI2CStatus; /* Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" */ + USHORT ClockSource; /* Atomic Table, indirectly used by various SW components,called from ASIC_Init */ + USHORT MemoryDeviceInit; /* Atomic Table, indirectly used by various SW components,called from SetMemoryClock */ + USHORT EnableYUV; /* Atomic Table, indirectly used by various SW components,called from EnableVGARender */ + USHORT DIG1EncoderControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */ + USHORT DIG2EncoderControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */ + USHORT DIG1TransmitterControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */ + USHORT DIG2TransmitterControl; /* Atomic Table,directly used by various SW components,latest version 1.1 */ + USHORT ProcessAuxChannelTransaction; /* Function Table,only used by Bios */ + USHORT DPEncoderService; /* Function Table,only used by Bios */ +} ATOM_MASTER_LIST_OF_COMMAND_TABLES; + +/* For backward compatible */ +#define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction +#define UNIPHYTransmitterControl DIG1TransmitterControl +#define LVTMATransmitterControl DIG2TransmitterControl +#define SetCRTC_DPM_State GetConditionalGoldenSetting +#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange + +typedef struct _ATOM_MASTER_COMMAND_TABLE { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables; +} ATOM_MASTER_COMMAND_TABLE; + +/****************************************************************************/ +/* Structures used in every command table */ +/****************************************************************************/ +typedef struct _ATOM_TABLE_ATTRIBUTE { +#if ATOM_BIG_ENDIAN + USHORT UpdatedByUtility:1; /* [15]=Table updated by utility flag */ + USHORT PS_SizeInBytes:7; /* [14:8]=Size of parameter space in Bytes (multiple of a dword), */ + USHORT WS_SizeInBytes:8; /* [7:0]=Size of workspace in Bytes (in multiple of a dword), */ +#else + USHORT WS_SizeInBytes:8; /* [7:0]=Size of workspace in Bytes (in multiple of a dword), */ + USHORT PS_SizeInBytes:7; /* [14:8]=Size of parameter space in Bytes (multiple of a dword), */ + USHORT UpdatedByUtility:1; /* [15]=Table updated by utility flag */ +#endif +} ATOM_TABLE_ATTRIBUTE; + +typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS { + ATOM_TABLE_ATTRIBUTE sbfAccess; + USHORT susAccess; +} ATOM_TABLE_ATTRIBUTE_ACCESS; + +/****************************************************************************/ +/* Common header for all command tables. */ +/* Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. */ +/* And the pointer actually points to this header. */ +/****************************************************************************/ +typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER { + ATOM_COMMON_TABLE_HEADER CommonHeader; + ATOM_TABLE_ATTRIBUTE TableAttribute; +} ATOM_COMMON_ROM_COMMAND_TABLE_HEADER; + +/****************************************************************************/ +/* Structures used by ComputeMemoryEnginePLLTable */ +/****************************************************************************/ +#define COMPUTE_MEMORY_PLL_PARAM 1 +#define COMPUTE_ENGINE_PLL_PARAM 2 + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS { + ULONG ulClock; /* When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div */ + UCHAR ucAction; /* 0:reserved //1:Memory //2:Engine */ + UCHAR ucReserved; /* may expand to return larger Fbdiv later */ + UCHAR ucFbDiv; /* return value */ + UCHAR ucPostDiv; /* return value */ +} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS; + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 { + ULONG ulClock; /* When return, [23:0] return real clock */ + UCHAR ucAction; /* 0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register */ + USHORT usFbDiv; /* return Feedback value to be written to register */ + UCHAR ucPostDiv; /* return post div to be written to register */ +} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2; +#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS + +#define SET_CLOCK_FREQ_MASK 0x00FFFFFF /* Clock change tables only take bit [23:0] as the requested clock value */ +#define USE_NON_BUS_CLOCK_MASK 0x01000000 /* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */ +#define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 /* Only applicable to memory clock change, when set, using memory self refresh during clock transition */ +#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 /* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */ +#define FIRST_TIME_CHANGE_CLOCK 0x08000000 /* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */ +#define SKIP_SW_PROGRAM_PLL 0x10000000 /* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */ +#define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK + +#define b3USE_NON_BUS_CLOCK_MASK 0x01 /* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */ +#define b3USE_MEMORY_SELF_REFRESH 0x02 /* Only applicable to memory clock change, when set, using memory self refresh during clock transition */ +#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 /* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */ +#define b3FIRST_TIME_CHANGE_CLOCK 0x08 /* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */ +#define b3SKIP_SW_PROGRAM_PLL 0x10 /* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */ + +typedef struct _ATOM_COMPUTE_CLOCK_FREQ { +#if ATOM_BIG_ENDIAN + ULONG ulComputeClockFlag:8; /* =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */ + ULONG ulClockFreq:24; /* in unit of 10kHz */ +#else + ULONG ulClockFreq:24; /* in unit of 10kHz */ + ULONG ulComputeClockFlag:8; /* =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */ +#endif +} ATOM_COMPUTE_CLOCK_FREQ; + +typedef struct _ATOM_S_MPLL_FB_DIVIDER { + USHORT usFbDivFrac; + USHORT usFbDiv; +} ATOM_S_MPLL_FB_DIVIDER; + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 { + union { + ATOM_COMPUTE_CLOCK_FREQ ulClock; /* Input Parameter */ + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; /* Output Parameter */ + }; + UCHAR ucRefDiv; /* Output Parameter */ + UCHAR ucPostDiv; /* Output Parameter */ + UCHAR ucCntlFlag; /* Output Parameter */ + UCHAR ucReserved; +} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3; + +/* ucCntlFlag */ +#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1 +#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2 +#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4 + +typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER { + ATOM_COMPUTE_CLOCK_FREQ ulClock; + ULONG ulReserved[2]; +} DYNAMICE_MEMORY_SETTINGS_PARAMETER; + +typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER { + ATOM_COMPUTE_CLOCK_FREQ ulClock; + ULONG ulMemoryClock; + ULONG ulReserved; +} DYNAMICE_ENGINE_SETTINGS_PARAMETER; + +/****************************************************************************/ +/* Structures used by SetEngineClockTable */ +/****************************************************************************/ +typedef struct _SET_ENGINE_CLOCK_PARAMETERS { + ULONG ulTargetEngineClock; /* In 10Khz unit */ +} SET_ENGINE_CLOCK_PARAMETERS; + +typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION { + ULONG ulTargetEngineClock; /* In 10Khz unit */ + COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; +} SET_ENGINE_CLOCK_PS_ALLOCATION; + +/****************************************************************************/ +/* Structures used by SetMemoryClockTable */ +/****************************************************************************/ +typedef struct _SET_MEMORY_CLOCK_PARAMETERS { + ULONG ulTargetMemoryClock; /* In 10Khz unit */ +} SET_MEMORY_CLOCK_PARAMETERS; + +typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION { + ULONG ulTargetMemoryClock; /* In 10Khz unit */ + COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; +} SET_MEMORY_CLOCK_PS_ALLOCATION; + +/****************************************************************************/ +/* Structures used by ASIC_Init.ctb */ +/****************************************************************************/ +typedef struct _ASIC_INIT_PARAMETERS { + ULONG ulDefaultEngineClock; /* In 10Khz unit */ + ULONG ulDefaultMemoryClock; /* In 10Khz unit */ +} ASIC_INIT_PARAMETERS; + +typedef struct _ASIC_INIT_PS_ALLOCATION { + ASIC_INIT_PARAMETERS sASICInitClocks; + SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; /* Caller doesn't need to init this structure */ +} ASIC_INIT_PS_ALLOCATION; + +/****************************************************************************/ +/* Structure used by DynamicClockGatingTable.ctb */ +/****************************************************************************/ +typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS { + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucPadding[3]; +} DYNAMIC_CLOCK_GATING_PARAMETERS; +#define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS + +/****************************************************************************/ +/* Structure used by EnableASIC_StaticPwrMgtTable.ctb */ +/****************************************************************************/ +typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS { + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucPadding[3]; +} ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS; +#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS + +/****************************************************************************/ +/* Structures used by DAC_LoadDetectionTable.ctb */ +/****************************************************************************/ +typedef struct _DAC_LOAD_DETECTION_PARAMETERS { + USHORT usDeviceID; /* {ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} */ + UCHAR ucDacType; /* {ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} */ + UCHAR ucMisc; /* Valid only when table revision =1.3 and above */ +} DAC_LOAD_DETECTION_PARAMETERS; + +/* DAC_LOAD_DETECTION_PARAMETERS.ucMisc */ +#define DAC_LOAD_MISC_YPrPb 0x01 + +typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION { + DAC_LOAD_DETECTION_PARAMETERS sDacload; + ULONG Reserved[2]; /* Don't set this one, allocation for EXT DAC */ +} DAC_LOAD_DETECTION_PS_ALLOCATION; + +/****************************************************************************/ +/* Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb */ +/****************************************************************************/ +typedef struct _DAC_ENCODER_CONTROL_PARAMETERS { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + UCHAR ucDacStandard; /* See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) */ + UCHAR ucAction; /* 0: turn off encoder */ + /* 1: setup and turn on encoder */ + /* 7: ATOM_ENCODER_INIT Initialize DAC */ +} DAC_ENCODER_CONTROL_PARAMETERS; + +#define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS + +/****************************************************************************/ +/* Structures used by DIG1EncoderControlTable */ +/* DIG2EncoderControlTable */ +/* ExternalEncoderControlTable */ +/****************************************************************************/ +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + UCHAR ucConfig; + /* [2] Link Select: */ + /* =0: PHY linkA if bfLane<3 */ + /* =1: PHY linkB if bfLanes<3 */ + /* =0: PHY linkA+B if bfLanes=3 */ + /* [3] Transmitter Sel */ + /* =0: UNIPHY or PCIEPHY */ + /* =1: LVTMA */ + UCHAR ucAction; /* =0: turn off encoder */ + /* =1: turn on encoder */ + UCHAR ucEncoderMode; + /* =0: DP encoder */ + /* =1: LVDS encoder */ + /* =2: DVI encoder */ + /* =3: HDMI encoder */ + /* =4: SDVO encoder */ + UCHAR ucLaneNum; /* how many lanes to enable */ + UCHAR ucReserved[2]; +} DIG_ENCODER_CONTROL_PARAMETERS; +#define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS +#define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS + +/* ucConfig */ +#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01 +#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04 +#define ATOM_ENCODER_CONFIG_LINKA 0x00 +#define ATOM_ENCODER_CONFIG_LINKB 0x04 +#define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA +#define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB +#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08 +#define ATOM_ENCODER_CONFIG_UNIPHY 0x00 +#define ATOM_ENCODER_CONFIG_LVTMA 0x08 +#define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00 +#define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08 +#define ATOM_ENCODER_CONFIG_DIGB 0x80 /* VBIOS Internal use, outside SW should set this bit=0 */ +/* ucAction */ +/* ATOM_ENABLE: Enable Encoder */ +/* ATOM_DISABLE: Disable Encoder */ + +/* ucEncoderMode */ +#define ATOM_ENCODER_MODE_DP 0 +#define ATOM_ENCODER_MODE_LVDS 1 +#define ATOM_ENCODER_MODE_DVI 2 +#define ATOM_ENCODER_MODE_HDMI 3 +#define ATOM_ENCODER_MODE_SDVO 4 +#define ATOM_ENCODER_MODE_TV 13 +#define ATOM_ENCODER_MODE_CV 14 +#define ATOM_ENCODER_MODE_CRT 15 + +typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 { +#if ATOM_BIG_ENDIAN + UCHAR ucReserved1:2; + UCHAR ucTransmitterSel:2; /* =0: UniphyAB, =1: UniphyCD =2: UniphyEF */ + UCHAR ucLinkSel:1; /* =0: linkA/C/E =1: linkB/D/F */ + UCHAR ucReserved:1; + UCHAR ucDPLinkRate:1; /* =0: 1.62Ghz, =1: 2.7Ghz */ +#else + UCHAR ucDPLinkRate:1; /* =0: 1.62Ghz, =1: 2.7Ghz */ + UCHAR ucReserved:1; + UCHAR ucLinkSel:1; /* =0: linkA/C/E =1: linkB/D/F */ + UCHAR ucTransmitterSel:2; /* =0: UniphyAB, =1: UniphyCD =2: UniphyEF */ + UCHAR ucReserved1:2; +#endif +} ATOM_DIG_ENCODER_CONFIG_V2; + +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + ATOM_DIG_ENCODER_CONFIG_V2 acConfig; + UCHAR ucAction; + UCHAR ucEncoderMode; + /* =0: DP encoder */ + /* =1: LVDS encoder */ + /* =2: DVI encoder */ + /* =3: HDMI encoder */ + /* =4: SDVO encoder */ + UCHAR ucLaneNum; /* how many lanes to enable */ + UCHAR ucReserved[2]; +} DIG_ENCODER_CONTROL_PARAMETERS_V2; + +/* ucConfig */ +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01 +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04 +#define ATOM_ENCODER_CONFIG_V2_LINKA 0x00 +#define ATOM_ENCODER_CONFIG_V2_LINKB 0x04 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10 + +/****************************************************************************/ +/* Structures used by UNIPHYTransmitterControlTable */ +/* LVTMATransmitterControlTable */ +/* DVOOutputControlTable */ +/****************************************************************************/ +typedef struct _ATOM_DP_VS_MODE { + UCHAR ucLaneSel; + UCHAR ucLaneSet; +} ATOM_DP_VS_MODE; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS { + union { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + USHORT usInitInfo; /* when init uniphy,lower 8bit is used for connector type defined in objectid.h */ + ATOM_DP_VS_MODE asMode; /* DP Voltage swing mode */ + }; + UCHAR ucConfig; + /* [0]=0: 4 lane Link, */ + /* =1: 8 lane Link ( Dual Links TMDS ) */ + /* [1]=0: InCoherent mode */ + /* =1: Coherent Mode */ + /* [2] Link Select: */ + /* =0: PHY linkA if bfLane<3 */ + /* =1: PHY linkB if bfLanes<3 */ + /* =0: PHY linkA+B if bfLanes=3 */ + /* [5:4]PCIE lane Sel */ + /* =0: lane 0~3 or 0~7 */ + /* =1: lane 4~7 */ + /* =2: lane 8~11 or 8~15 */ + /* =3: lane 12~15 */ + UCHAR ucAction; /* =0: turn off encoder */ + /* =1: turn on encoder */ + UCHAR ucReserved[4]; +} DIG_TRANSMITTER_CONTROL_PARAMETERS; + +#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS + +/* ucInitInfo */ +#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff + +/* ucConfig */ +#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01 +#define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02 +#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_LINKB 0x04 +#define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00 +#define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04 + +#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */ +#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */ +#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 /* only used when ATOM_TRANSMITTER_ACTION_ENABLE */ + +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30 +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20 +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30 +#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0 +#define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00 +#define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00 +#define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40 +#define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80 +#define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80 +#define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0 + +/* ucAction */ +#define ATOM_TRANSMITTER_ACTION_DISABLE 0 +#define ATOM_TRANSMITTER_ACTION_ENABLE 1 +#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2 +#define ATOM_TRANSMITTER_ACTION_LCD_BLON 3 +#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4 +#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5 +#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6 +#define ATOM_TRANSMITTER_ACTION_INIT 7 +#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8 +#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9 +#define ATOM_TRANSMITTER_ACTION_SETUP 10 +#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11 + +/* Following are used for DigTransmitterControlTable ver1.2 */ +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 { +#if ATOM_BIG_ENDIAN + UCHAR ucTransmitterSel:2; /* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */ + /* =1 Dig Transmitter 2 ( Uniphy CD ) */ + /* =2 Dig Transmitter 3 ( Uniphy EF ) */ + UCHAR ucReserved:1; + UCHAR fDPConnector:1; /* bit4=0: DP connector =1: None DP connector */ + UCHAR ucEncoderSel:1; /* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */ + UCHAR ucLinkSel:1; /* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */ + /* =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */ + + UCHAR fCoherentMode:1; /* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */ + UCHAR fDualLinkConnector:1; /* bit0=1: Dual Link DVI connector */ +#else + UCHAR fDualLinkConnector:1; /* bit0=1: Dual Link DVI connector */ + UCHAR fCoherentMode:1; /* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */ + UCHAR ucLinkSel:1; /* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */ + /* =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */ + UCHAR ucEncoderSel:1; /* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */ + UCHAR fDPConnector:1; /* bit4=0: DP connector =1: None DP connector */ + UCHAR ucReserved:1; + UCHAR ucTransmitterSel:2; /* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */ + /* =1 Dig Transmitter 2 ( Uniphy CD ) */ + /* =2 Dig Transmitter 3 ( Uniphy EF ) */ +#endif +} ATOM_DIG_TRANSMITTER_CONFIG_V2; + +/* ucConfig */ +/* Bit0 */ +#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01 + +/* Bit1 */ +#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02 + +/* Bit2 */ +#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04 + +/* Bit3 */ +#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08 +#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 /* only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */ +#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 /* only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */ + +/* Bit4 */ +#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10 + +/* Bit7:6 */ +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0 +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 /* AB */ +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 /* CD */ +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 /* EF */ + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 { + union { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + USHORT usInitInfo; /* when init uniphy,lower 8bit is used for connector type defined in objectid.h */ + ATOM_DP_VS_MODE asMode; /* DP Voltage swing mode */ + }; + ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig; + UCHAR ucAction; /* define as ATOM_TRANSMITER_ACTION_XXX */ + UCHAR ucReserved[4]; +} DIG_TRANSMITTER_CONTROL_PARAMETERS_V2; + +/****************************************************************************/ +/* Structures used by DAC1OuputControlTable */ +/* DAC2OuputControlTable */ +/* LVTMAOutputControlTable (Before DEC30) */ +/* TMDSAOutputControlTable (Before DEC30) */ +/****************************************************************************/ +typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS { + UCHAR ucAction; /* Possible input:ATOM_ENABLE||ATOMDISABLE */ + /* When the display is LCD, in addition to above: */ + /* ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| */ + /* ATOM_LCD_SELFTEST_STOP */ + + UCHAR aucPadding[3]; /* padding to DWORD aligned */ +} DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS; + +#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS + +#define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION +#define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS + +/****************************************************************************/ +/* Structures used by BlankCRTCTable */ +/****************************************************************************/ +typedef struct _BLANK_CRTC_PARAMETERS { + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucBlanking; /* ATOM_BLANKING or ATOM_BLANKINGOFF */ + USHORT usBlackColorRCr; + USHORT usBlackColorGY; + USHORT usBlackColorBCb; +} BLANK_CRTC_PARAMETERS; +#define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS + +/****************************************************************************/ +/* Structures used by EnableCRTCTable */ +/* EnableCRTCMemReqTable */ +/* UpdateCRTC_DoubleBufferRegistersTable */ +/****************************************************************************/ +typedef struct _ENABLE_CRTC_PARAMETERS { + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucPadding[2]; +} ENABLE_CRTC_PARAMETERS; +#define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS + +/****************************************************************************/ +/* Structures used by SetCRTC_OverScanTable */ +/****************************************************************************/ +typedef struct _SET_CRTC_OVERSCAN_PARAMETERS { + USHORT usOverscanRight; /* right */ + USHORT usOverscanLeft; /* left */ + USHORT usOverscanBottom; /* bottom */ + USHORT usOverscanTop; /* top */ + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucPadding[3]; +} SET_CRTC_OVERSCAN_PARAMETERS; +#define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS + +/****************************************************************************/ +/* Structures used by SetCRTC_ReplicationTable */ +/****************************************************************************/ +typedef struct _SET_CRTC_REPLICATION_PARAMETERS { + UCHAR ucH_Replication; /* horizontal replication */ + UCHAR ucV_Replication; /* vertical replication */ + UCHAR usCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucPadding; +} SET_CRTC_REPLICATION_PARAMETERS; +#define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS + +/****************************************************************************/ +/* Structures used by SelectCRTC_SourceTable */ +/****************************************************************************/ +typedef struct _SELECT_CRTC_SOURCE_PARAMETERS { + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucDevice; /* ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... */ + UCHAR ucPadding[2]; +} SELECT_CRTC_SOURCE_PARAMETERS; +#define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS + +typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 { + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucEncoderID; /* DAC1/DAC2/TVOUT/DIG1/DIG2/DVO */ + UCHAR ucEncodeMode; /* Encoding mode, only valid when using DIG1/DIG2/DVO */ + UCHAR ucPadding; +} SELECT_CRTC_SOURCE_PARAMETERS_V2; + +/* ucEncoderID */ +/* #define ASIC_INT_DAC1_ENCODER_ID 0x00 */ +/* #define ASIC_INT_TV_ENCODER_ID 0x02 */ +/* #define ASIC_INT_DIG1_ENCODER_ID 0x03 */ +/* #define ASIC_INT_DAC2_ENCODER_ID 0x04 */ +/* #define ASIC_EXT_TV_ENCODER_ID 0x06 */ +/* #define ASIC_INT_DVO_ENCODER_ID 0x07 */ +/* #define ASIC_INT_DIG2_ENCODER_ID 0x09 */ +/* #define ASIC_EXT_DIG_ENCODER_ID 0x05 */ + +/* ucEncodeMode */ +/* #define ATOM_ENCODER_MODE_DP 0 */ +/* #define ATOM_ENCODER_MODE_LVDS 1 */ +/* #define ATOM_ENCODER_MODE_DVI 2 */ +/* #define ATOM_ENCODER_MODE_HDMI 3 */ +/* #define ATOM_ENCODER_MODE_SDVO 4 */ +/* #define ATOM_ENCODER_MODE_TV 13 */ +/* #define ATOM_ENCODER_MODE_CV 14 */ +/* #define ATOM_ENCODER_MODE_CRT 15 */ + +/****************************************************************************/ +/* Structures used by SetPixelClockTable */ +/* GetPixelClockTable */ +/****************************************************************************/ +/* Major revision=1., Minor revision=1 */ +typedef struct _PIXEL_CLOCK_PARAMETERS { + USHORT usPixelClock; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */ + /* 0 means disable PPLL */ + USHORT usRefDiv; /* Reference divider */ + USHORT usFbDiv; /* feedback divider */ + UCHAR ucPostDiv; /* post divider */ + UCHAR ucFracFbDiv; /* fractional feedback divider */ + UCHAR ucPpll; /* ATOM_PPLL1 or ATOM_PPL2 */ + UCHAR ucRefDivSrc; /* ATOM_PJITTER or ATO_NONPJITTER */ + UCHAR ucCRTC; /* Which CRTC uses this Ppll */ + UCHAR ucPadding; +} PIXEL_CLOCK_PARAMETERS; + +/* Major revision=1., Minor revision=2, add ucMiscIfno */ +/* ucMiscInfo: */ +#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1 +#define MISC_DEVICE_INDEX_MASK 0xF0 +#define MISC_DEVICE_INDEX_SHIFT 4 + +typedef struct _PIXEL_CLOCK_PARAMETERS_V2 { + USHORT usPixelClock; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */ + /* 0 means disable PPLL */ + USHORT usRefDiv; /* Reference divider */ + USHORT usFbDiv; /* feedback divider */ + UCHAR ucPostDiv; /* post divider */ + UCHAR ucFracFbDiv; /* fractional feedback divider */ + UCHAR ucPpll; /* ATOM_PPLL1 or ATOM_PPL2 */ + UCHAR ucRefDivSrc; /* ATOM_PJITTER or ATO_NONPJITTER */ + UCHAR ucCRTC; /* Which CRTC uses this Ppll */ + UCHAR ucMiscInfo; /* Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog */ +} PIXEL_CLOCK_PARAMETERS_V2; + +/* Major revision=1., Minor revision=3, structure/definition change */ +/* ucEncoderMode: */ +/* ATOM_ENCODER_MODE_DP */ +/* ATOM_ENOCDER_MODE_LVDS */ +/* ATOM_ENOCDER_MODE_DVI */ +/* ATOM_ENOCDER_MODE_HDMI */ +/* ATOM_ENOCDER_MODE_SDVO */ +/* ATOM_ENCODER_MODE_TV 13 */ +/* ATOM_ENCODER_MODE_CV 14 */ +/* ATOM_ENCODER_MODE_CRT 15 */ + +/* ucDVOConfig */ +/* #define DVO_ENCODER_CONFIG_RATE_SEL 0x01 */ +/* #define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 */ +/* #define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 */ +/* #define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c */ +/* #define DVO_ENCODER_CONFIG_LOW12BIT 0x00 */ +/* #define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 */ +/* #define DVO_ENCODER_CONFIG_24BIT 0x08 */ + +/* ucMiscInfo: also changed, see below */ +#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01 +#define PIXEL_CLOCK_MISC_VGA_MODE 0x02 +#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04 +#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00 +#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04 +#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08 + +typedef struct _PIXEL_CLOCK_PARAMETERS_V3 { + USHORT usPixelClock; /* in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */ + /* 0 means disable PPLL. For VGA PPLL,make sure this value is not 0. */ + USHORT usRefDiv; /* Reference divider */ + USHORT usFbDiv; /* feedback divider */ + UCHAR ucPostDiv; /* post divider */ + UCHAR ucFracFbDiv; /* fractional feedback divider */ + UCHAR ucPpll; /* ATOM_PPLL1 or ATOM_PPL2 */ + UCHAR ucTransmitterId; /* graphic encoder id defined in objectId.h */ + union { + UCHAR ucEncoderMode; /* encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ */ + UCHAR ucDVOConfig; /* when use DVO, need to know SDR/DDR, 12bit or 24bit */ + }; + UCHAR ucMiscInfo; /* bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel */ + /* bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source */ +} PIXEL_CLOCK_PARAMETERS_V3; + +#define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2 +#define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST + +/****************************************************************************/ +/* Structures used by AdjustDisplayPllTable */ +/****************************************************************************/ +typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS { + USHORT usPixelClock; + UCHAR ucTransmitterID; + UCHAR ucEncodeMode; + union { + UCHAR ucDVOConfig; /* if DVO, need passing link rate and output 12bitlow or 24bit */ + UCHAR ucConfig; /* if none DVO, not defined yet */ + }; + UCHAR ucReserved[3]; +} ADJUST_DISPLAY_PLL_PARAMETERS; + +#define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10 + +#define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS + +/****************************************************************************/ +/* Structures used by EnableYUVTable */ +/****************************************************************************/ +typedef struct _ENABLE_YUV_PARAMETERS { + UCHAR ucEnable; /* ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) */ + UCHAR ucCRTC; /* Which CRTC needs this YUV or RGB format */ + UCHAR ucPadding[2]; +} ENABLE_YUV_PARAMETERS; +#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS + +/****************************************************************************/ +/* Structures used by GetMemoryClockTable */ +/****************************************************************************/ +typedef struct _GET_MEMORY_CLOCK_PARAMETERS { + ULONG ulReturnMemoryClock; /* current memory speed in 10KHz unit */ +} GET_MEMORY_CLOCK_PARAMETERS; +#define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS + +/****************************************************************************/ +/* Structures used by GetEngineClockTable */ +/****************************************************************************/ +typedef struct _GET_ENGINE_CLOCK_PARAMETERS { + ULONG ulReturnEngineClock; /* current engine speed in 10KHz unit */ +} GET_ENGINE_CLOCK_PARAMETERS; +#define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS + +/****************************************************************************/ +/* Following Structures and constant may be obsolete */ +/****************************************************************************/ +/* Maxium 8 bytes,the data read in will be placed in the parameter space. */ +/* Read operaion successeful when the paramter space is non-zero, otherwise read operation failed */ +typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS { + USHORT usPrescale; /* Ratio between Engine clock and I2C clock */ + USHORT usVRAMAddress; /* Adress in Frame Buffer where to pace raw EDID */ + USHORT usStatus; /* When use output: lower byte EDID checksum, high byte hardware status */ + /* WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte */ + UCHAR ucSlaveAddr; /* Read from which slave */ + UCHAR ucLineNumber; /* Read from which HW assisted line */ +} READ_EDID_FROM_HW_I2C_DATA_PARAMETERS; +#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS + +#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0 +#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1 +#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2 +#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3 +#define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4 + +typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS { + USHORT usPrescale; /* Ratio between Engine clock and I2C clock */ + USHORT usByteOffset; /* Write to which byte */ + /* Upper portion of usByteOffset is Format of data */ + /* 1bytePS+offsetPS */ + /* 2bytesPS+offsetPS */ + /* blockID+offsetPS */ + /* blockID+offsetID */ + /* blockID+counterID+offsetID */ + UCHAR ucData; /* PS data1 */ + UCHAR ucStatus; /* Status byte 1=success, 2=failure, Also is used as PS data2 */ + UCHAR ucSlaveAddr; /* Write to which slave */ + UCHAR ucLineNumber; /* Write from which HW assisted line */ +} WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS; + +#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + +typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS { + USHORT usPrescale; /* Ratio between Engine clock and I2C clock */ + UCHAR ucSlaveAddr; /* Write to which slave */ + UCHAR ucLineNumber; /* Write from which HW assisted line */ +} SET_UP_HW_I2C_DATA_PARAMETERS; + +/**************************************************************************/ +#define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + +/****************************************************************************/ +/* Structures used by PowerConnectorDetectionTable */ +/****************************************************************************/ +typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS { + UCHAR ucPowerConnectorStatus; /* Used for return value 0: detected, 1:not detected */ + UCHAR ucPwrBehaviorId; + USHORT usPwrBudget; /* how much power currently boot to in unit of watt */ +} POWER_CONNECTOR_DETECTION_PARAMETERS; + +typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION { + UCHAR ucPowerConnectorStatus; /* Used for return value 0: detected, 1:not detected */ + UCHAR ucReserved; + USHORT usPwrBudget; /* how much power currently boot to in unit of watt */ + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +} POWER_CONNECTOR_DETECTION_PS_ALLOCATION; + +/****************************LVDS SS Command Table Definitions**********************/ + +/****************************************************************************/ +/* Structures used by EnableSpreadSpectrumOnPPLLTable */ +/****************************************************************************/ +typedef struct _ENABLE_LVDS_SS_PARAMETERS { + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */ + UCHAR ucSpreadSpectrumStepSize_Delay; /* bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY */ + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucPadding[3]; +} ENABLE_LVDS_SS_PARAMETERS; + +/* ucTableFormatRevision=1,ucTableContentRevision=2 */ +typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 { + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */ + UCHAR ucSpreadSpectrumStep; /* */ + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucSpreadSpectrumDelay; + UCHAR ucSpreadSpectrumRange; + UCHAR ucPadding; +} ENABLE_LVDS_SS_PARAMETERS_V2; + +/* This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. */ +typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL { + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */ + UCHAR ucSpreadSpectrumStep; /* */ + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucSpreadSpectrumDelay; + UCHAR ucSpreadSpectrumRange; + UCHAR ucPpll; /* ATOM_PPLL1/ATOM_PPLL2 */ +} ENABLE_SPREAD_SPECTRUM_ON_PPLL; + +#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL + +/**************************************************************************/ + +typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION { + PIXEL_CLOCK_PARAMETERS sPCLKInput; + ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved; /* Caller doesn't need to init this portion */ +} SET_PIXEL_CLOCK_PS_ALLOCATION; + +#define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION + +/****************************************************************************/ +/* Structures used by ### */ +/****************************************************************************/ +typedef struct _MEMORY_TRAINING_PARAMETERS { + ULONG ulTargetMemoryClock; /* In 10Khz unit */ +} MEMORY_TRAINING_PARAMETERS; +#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS + +/****************************LVDS and other encoder command table definitions **********************/ + +/****************************************************************************/ +/* Structures used by LVDSEncoderControlTable (Before DCE30) */ +/* LVTMAEncoderControlTable (Before DCE30) */ +/* TMDSAEncoderControlTable (Before DCE30) */ +/****************************************************************************/ +typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + UCHAR ucMisc; /* bit0=0: Enable single link */ + /* =1: Enable dual link */ + /* Bit1=0: 666RGB */ + /* =1: 888RGB */ + UCHAR ucAction; /* 0: turn off encoder */ + /* 1: setup and turn on encoder */ +} LVDS_ENCODER_CONTROL_PARAMETERS; + +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS + +#define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS + +#define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS + +/* ucTableFormatRevision=1,ucTableContentRevision=2 */ +typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx defintions below */ + UCHAR ucAction; /* 0: turn off encoder */ + /* 1: setup and turn on encoder */ + UCHAR ucTruncate; /* bit0=0: Disable truncate */ + /* =1: Enable truncate */ + /* bit4=0: 666RGB */ + /* =1: 888RGB */ + UCHAR ucSpatial; /* bit0=0: Disable spatial dithering */ + /* =1: Enable spatial dithering */ + /* bit4=0: 666RGB */ + /* =1: 888RGB */ + UCHAR ucTemporal; /* bit0=0: Disable temporal dithering */ + /* =1: Enable temporal dithering */ + /* bit4=0: 666RGB */ + /* =1: 888RGB */ + /* bit5=0: Gray level 2 */ + /* =1: Gray level 4 */ + UCHAR ucFRC; /* bit4=0: 25FRC_SEL pattern E */ + /* =1: 25FRC_SEL pattern F */ + /* bit6:5=0: 50FRC_SEL pattern A */ + /* =1: 50FRC_SEL pattern B */ + /* =2: 50FRC_SEL pattern C */ + /* =3: 50FRC_SEL pattern D */ + /* bit7=0: 75FRC_SEL pattern E */ + /* =1: 75FRC_SEL pattern F */ +} LVDS_ENCODER_CONTROL_PARAMETERS_V2; + +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2 + +#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2 +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3 + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3 + +/****************************************************************************/ +/* Structures used by ### */ +/****************************************************************************/ +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS { + UCHAR ucEnable; /* Enable or Disable External TMDS encoder */ + UCHAR ucMisc; /* Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} */ + UCHAR ucPadding[2]; +} ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS; + +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION { + ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Caller doesn't need to init this portion */ +} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION; + +#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 + +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 { + ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Caller doesn't need to init this portion */ +} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2; + +typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION { + DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +} EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION; + +/****************************************************************************/ +/* Structures used by DVOEncoderControlTable */ +/****************************************************************************/ +/* ucTableFormatRevision=1,ucTableContentRevision=3 */ + +/* ucDVOConfig: */ +#define DVO_ENCODER_CONFIG_RATE_SEL 0x01 +#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 +#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 +#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c +#define DVO_ENCODER_CONFIG_LOW12BIT 0x00 +#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 +#define DVO_ENCODER_CONFIG_24BIT 0x08 + +typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 { + USHORT usPixelClock; + UCHAR ucDVOConfig; + UCHAR ucAction; /* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */ + UCHAR ucReseved[4]; +} DVO_ENCODER_CONTROL_PARAMETERS_V3; +#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3 + +/* ucTableFormatRevision=1 */ +/* ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for */ +/* bit1=0: non-coherent mode */ +/* =1: coherent mode */ + +/* ========================================================================================== */ +/* Only change is here next time when changing encoder parameter definitions again! */ +#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST + +#define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS +#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION + +/* ========================================================================================== */ +#define PANEL_ENCODER_MISC_DUAL 0x01 +#define PANEL_ENCODER_MISC_COHERENT 0x02 +#define PANEL_ENCODER_MISC_TMDS_LINKB 0x04 +#define PANEL_ENCODER_MISC_HDMI_TYPE 0x08 + +#define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE +#define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE +#define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1) + +#define PANEL_ENCODER_TRUNCATE_EN 0x01 +#define PANEL_ENCODER_TRUNCATE_DEPTH 0x10 +#define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01 +#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10 +#define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01 +#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10 +#define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20 +#define PANEL_ENCODER_25FRC_MASK 0x10 +#define PANEL_ENCODER_25FRC_E 0x00 +#define PANEL_ENCODER_25FRC_F 0x10 +#define PANEL_ENCODER_50FRC_MASK 0x60 +#define PANEL_ENCODER_50FRC_A 0x00 +#define PANEL_ENCODER_50FRC_B 0x20 +#define PANEL_ENCODER_50FRC_C 0x40 +#define PANEL_ENCODER_50FRC_D 0x60 +#define PANEL_ENCODER_75FRC_MASK 0x80 +#define PANEL_ENCODER_75FRC_E 0x00 +#define PANEL_ENCODER_75FRC_F 0x80 + +/****************************************************************************/ +/* Structures used by SetVoltageTable */ +/****************************************************************************/ +#define SET_VOLTAGE_TYPE_ASIC_VDDC 1 +#define SET_VOLTAGE_TYPE_ASIC_MVDDC 2 +#define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3 +#define SET_VOLTAGE_TYPE_ASIC_VDDCI 4 +#define SET_VOLTAGE_INIT_MODE 5 +#define SET_VOLTAGE_GET_MAX_VOLTAGE 6 /* Gets the Max. voltage for the soldered Asic */ + +#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1 +#define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2 +#define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4 + +#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2 + +typedef struct _SET_VOLTAGE_PARAMETERS { + UCHAR ucVoltageType; /* To tell which voltage to set up, VDDC/MVDDC/MVDDQ */ + UCHAR ucVoltageMode; /* To set all, to set source A or source B or ... */ + UCHAR ucVoltageIndex; /* An index to tell which voltage level */ + UCHAR ucReserved; +} SET_VOLTAGE_PARAMETERS; + +typedef struct _SET_VOLTAGE_PARAMETERS_V2 { + UCHAR ucVoltageType; /* To tell which voltage to set up, VDDC/MVDDC/MVDDQ */ + UCHAR ucVoltageMode; /* Not used, maybe use for state machine for differen power mode */ + USHORT usVoltageLevel; /* real voltage level */ +} SET_VOLTAGE_PARAMETERS_V2; + +typedef struct _SET_VOLTAGE_PS_ALLOCATION { + SET_VOLTAGE_PARAMETERS sASICSetVoltage; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +} SET_VOLTAGE_PS_ALLOCATION; + +/****************************************************************************/ +/* Structures used by TVEncoderControlTable */ +/****************************************************************************/ +typedef struct _TV_ENCODER_CONTROL_PARAMETERS { + USHORT usPixelClock; /* in 10KHz; for bios convenient */ + UCHAR ucTvStandard; /* See definition "ATOM_TV_NTSC ..." */ + UCHAR ucAction; /* 0: turn off encoder */ + /* 1: setup and turn on encoder */ +} TV_ENCODER_CONTROL_PARAMETERS; + +typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION { + TV_ENCODER_CONTROL_PARAMETERS sTVEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Don't set this one */ +} TV_ENCODER_CONTROL_PS_ALLOCATION; + +/* ==============================Data Table Portion==================================== */ + +#ifdef UEFI_BUILD +#define UTEMP USHORT +#define USHORT void* +#endif + +/****************************************************************************/ +/* Structure used in Data.mtb */ +/****************************************************************************/ +typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES { + USHORT UtilityPipeLine; /* Offest for the utility to get parser info,Don't change this position! */ + USHORT MultimediaCapabilityInfo; /* Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios */ + USHORT MultimediaConfigInfo; /* Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios */ + USHORT StandardVESA_Timing; /* Only used by Bios */ + USHORT FirmwareInfo; /* Shared by various SW components,latest version 1.4 */ + USHORT DAC_Info; /* Will be obsolete from R600 */ + USHORT LVDS_Info; /* Shared by various SW components,latest version 1.1 */ + USHORT TMDS_Info; /* Will be obsolete from R600 */ + USHORT AnalogTV_Info; /* Shared by various SW components,latest version 1.1 */ + USHORT SupportedDevicesInfo; /* Will be obsolete from R600 */ + USHORT GPIO_I2C_Info; /* Shared by various SW components,latest version 1.2 will be used from R600 */ + USHORT VRAM_UsageByFirmware; /* Shared by various SW components,latest version 1.3 will be used from R600 */ + USHORT GPIO_Pin_LUT; /* Shared by various SW components,latest version 1.1 */ + USHORT VESA_ToInternalModeLUT; /* Only used by Bios */ + USHORT ComponentVideoInfo; /* Shared by various SW components,latest version 2.1 will be used from R600 */ + USHORT PowerPlayInfo; /* Shared by various SW components,latest version 2.1,new design from R600 */ + USHORT CompassionateData; /* Will be obsolete from R600 */ + USHORT SaveRestoreInfo; /* Only used by Bios */ + USHORT PPLL_SS_Info; /* Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info */ + USHORT OemInfo; /* Defined and used by external SW, should be obsolete soon */ + USHORT XTMDS_Info; /* Will be obsolete from R600 */ + USHORT MclkSS_Info; /* Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used */ + USHORT Object_Header; /* Shared by various SW components,latest version 1.1 */ + USHORT IndirectIOAccess; /* Only used by Bios,this table position can't change at all!! */ + USHORT MC_InitParameter; /* Only used by command table */ + USHORT ASIC_VDDC_Info; /* Will be obsolete from R600 */ + USHORT ASIC_InternalSS_Info; /* New tabel name from R600, used to be called "ASIC_MVDDC_Info" */ + USHORT TV_VideoMode; /* Only used by command table */ + USHORT VRAM_Info; /* Only used by command table, latest version 1.3 */ + USHORT MemoryTrainingInfo; /* Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 */ + USHORT IntegratedSystemInfo; /* Shared by various SW components */ + USHORT ASIC_ProfilingInfo; /* New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 */ + USHORT VoltageObjectInfo; /* Shared by various SW components, latest version 1.1 */ + USHORT PowerSourceInfo; /* Shared by various SW components, latest versoin 1.1 */ +} ATOM_MASTER_LIST_OF_DATA_TABLES; + +#ifdef UEFI_BUILD +#define USHORT UTEMP +#endif + +typedef struct _ATOM_MASTER_DATA_TABLE { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; +} ATOM_MASTER_DATA_TABLE; + +/****************************************************************************/ +/* Structure used in MultimediaCapabilityInfoTable */ +/****************************************************************************/ +typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulSignature; /* HW info table signature string "$ATI" */ + UCHAR ucI2C_Type; /* I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) */ + UCHAR ucTV_OutInfo; /* Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) */ + UCHAR ucVideoPortInfo; /* Provides the video port capabilities */ + UCHAR ucHostPortInfo; /* Provides host port configuration information */ +} ATOM_MULTIMEDIA_CAPABILITY_INFO; + +/****************************************************************************/ +/* Structure used in MultimediaConfigInfoTable */ +/****************************************************************************/ +typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulSignature; /* MM info table signature sting "$MMT" */ + UCHAR ucTunerInfo; /* Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) */ + UCHAR ucAudioChipInfo; /* List the audio chip type (3:0) product type (4) and OEM revision (7:5) */ + UCHAR ucProductID; /* Defines as OEM ID or ATI board ID dependent on product type setting */ + UCHAR ucMiscInfo1; /* Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) */ + UCHAR ucMiscInfo2; /* I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) */ + UCHAR ucMiscInfo3; /* Video Decoder Type (3:0) Video In Standard/Crystal (7:4) */ + UCHAR ucMiscInfo4; /* Video Decoder Host Config (2:0) reserved (7:3) */ + UCHAR ucVideoInput0Info; /* Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */ + UCHAR ucVideoInput1Info; /* Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */ + UCHAR ucVideoInput2Info; /* Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */ + UCHAR ucVideoInput3Info; /* Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */ + UCHAR ucVideoInput4Info; /* Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */ +} ATOM_MULTIMEDIA_CONFIG_INFO; + +/****************************************************************************/ +/* Structures used in FirmwareInfoTable */ +/****************************************************************************/ + +/* usBIOSCapability Defintion: */ +/* Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */ +/* Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */ +/* Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */ +/* Others: Reserved */ +#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001 +#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002 +#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004 +#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008 +#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010 +#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020 +#define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040 +#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080 +#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100 +#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00 +#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000 +#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000 + +#ifndef _H2INC + +/* Please don't add or expand this bitfield structure below, this one will retire soon.! */ +typedef struct _ATOM_FIRMWARE_CAPABILITY { +#if ATOM_BIG_ENDIAN + USHORT Reserved:3; + USHORT HyperMemory_Size:4; + USHORT HyperMemory_Support:1; + USHORT PPMode_Assigned:1; + USHORT WMI_SUPPORT:1; + USHORT GPUControlsBL:1; + USHORT EngineClockSS_Support:1; + USHORT MemoryClockSS_Support:1; + USHORT ExtendedDesktopSupport:1; + USHORT DualCRTC_Support:1; + USHORT FirmwarePosted:1; +#else + USHORT FirmwarePosted:1; + USHORT DualCRTC_Support:1; + USHORT ExtendedDesktopSupport:1; + USHORT MemoryClockSS_Support:1; + USHORT EngineClockSS_Support:1; + USHORT GPUControlsBL:1; + USHORT WMI_SUPPORT:1; + USHORT PPMode_Assigned:1; + USHORT HyperMemory_Support:1; + USHORT HyperMemory_Size:4; + USHORT Reserved:3; +#endif +} ATOM_FIRMWARE_CAPABILITY; + +typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS { + ATOM_FIRMWARE_CAPABILITY sbfAccess; + USHORT susAccess; +} ATOM_FIRMWARE_CAPABILITY_ACCESS; + +#else + +typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS { + USHORT susAccess; +} ATOM_FIRMWARE_CAPABILITY_ACCESS; + +#endif + +typedef struct _ATOM_FIRMWARE_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; /* In 10Khz unit */ + ULONG ulDefaultMemoryClock; /* In 10Khz unit */ + ULONG ulDriverTargetEngineClock; /* In 10Khz unit */ + ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */ + ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */ + ULONG ulASICMaxEngineClock; /* In 10Khz unit */ + ULONG ulASICMaxMemoryClock; /* In 10Khz unit */ + UCHAR ucASICMaxTemperature; + UCHAR ucPadding[3]; /* Don't use them */ + ULONG aulReservedForBIOS[3]; /* Don't use them */ + USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */ + USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */ + USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMinPixelClockPLL_Output; /* In 10Khz unit, the definitions above can't change!!! */ + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; /* In 10Khz unit */ + USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */ + UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */ + UCHAR ucDesign_ID; /* Indicate what is the board design */ + UCHAR ucMemoryModule_ID; /* Indicate what is the board design */ +} ATOM_FIRMWARE_INFO; + +typedef struct _ATOM_FIRMWARE_INFO_V1_2 { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; /* In 10Khz unit */ + ULONG ulDefaultMemoryClock; /* In 10Khz unit */ + ULONG ulDriverTargetEngineClock; /* In 10Khz unit */ + ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */ + ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */ + ULONG ulASICMaxEngineClock; /* In 10Khz unit */ + ULONG ulASICMaxMemoryClock; /* In 10Khz unit */ + UCHAR ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + UCHAR ucPadding[2]; /* Don't use them */ + ULONG aulReservedForBIOS[2]; /* Don't use them */ + ULONG ulMinPixelClockPLL_Output; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */ + USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */ + USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMinPixelClockPLL_Output; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */ + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; /* In 10Khz unit */ + USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */ + UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */ + UCHAR ucDesign_ID; /* Indicate what is the board design */ + UCHAR ucMemoryModule_ID; /* Indicate what is the board design */ +} ATOM_FIRMWARE_INFO_V1_2; + +typedef struct _ATOM_FIRMWARE_INFO_V1_3 { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; /* In 10Khz unit */ + ULONG ulDefaultMemoryClock; /* In 10Khz unit */ + ULONG ulDriverTargetEngineClock; /* In 10Khz unit */ + ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */ + ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */ + ULONG ulASICMaxEngineClock; /* In 10Khz unit */ + ULONG ulASICMaxMemoryClock; /* In 10Khz unit */ + UCHAR ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + UCHAR ucPadding[2]; /* Don't use them */ + ULONG aulReservedForBIOS; /* Don't use them */ + ULONG ul3DAccelerationEngineClock; /* In 10Khz unit */ + ULONG ulMinPixelClockPLL_Output; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */ + USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */ + USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMinPixelClockPLL_Output; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */ + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; /* In 10Khz unit */ + USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */ + UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */ + UCHAR ucDesign_ID; /* Indicate what is the board design */ + UCHAR ucMemoryModule_ID; /* Indicate what is the board design */ +} ATOM_FIRMWARE_INFO_V1_3; + +typedef struct _ATOM_FIRMWARE_INFO_V1_4 { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; /* In 10Khz unit */ + ULONG ulDefaultMemoryClock; /* In 10Khz unit */ + ULONG ulDriverTargetEngineClock; /* In 10Khz unit */ + ULONG ulDriverTargetMemoryClock; /* In 10Khz unit */ + ULONG ulMaxEngineClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxMemoryClockPLL_Output; /* In 10Khz unit */ + ULONG ulMaxPixelClockPLL_Output; /* In 10Khz unit */ + ULONG ulASICMaxEngineClock; /* In 10Khz unit */ + ULONG ulASICMaxMemoryClock; /* In 10Khz unit */ + UCHAR ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + USHORT usBootUpVDDCVoltage; /* In MV unit */ + USHORT usLcdMinPixelClockPLL_Output; /* In MHz unit */ + USHORT usLcdMaxPixelClockPLL_Output; /* In MHz unit */ + ULONG ul3DAccelerationEngineClock; /* In 10Khz unit */ + ULONG ulMinPixelClockPLL_Output; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxEngineClockPLL_Input; /* In 10Khz unit */ + USHORT usMinEngineClockPLL_Output; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxMemoryClockPLL_Input; /* In 10Khz unit */ + USHORT usMinMemoryClockPLL_Output; /* In 10Khz unit */ + USHORT usMaxPixelClock; /* In 10Khz unit, Max. Pclk */ + USHORT usMinPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMaxPixelClockPLL_Input; /* In 10Khz unit */ + USHORT usMinPixelClockPLL_Output; /* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */ + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; /* In 10Khz unit */ + USHORT usPM_RTS_Location; /* RTS PM4 starting location in ROM in 1Kb unit */ + UCHAR ucPM_RTS_StreamSize; /* RTS PM4 packets in Kb unit */ + UCHAR ucDesign_ID; /* Indicate what is the board design */ + UCHAR ucMemoryModule_ID; /* Indicate what is the board design */ +} ATOM_FIRMWARE_INFO_V1_4; + +#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V1_4 + +/****************************************************************************/ +/* Structures used in IntegratedSystemInfoTable */ +/****************************************************************************/ +#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2 +#define IGP_CAP_FLAG_AC_CARD 0x4 +#define IGP_CAP_FLAG_SDVO_CARD 0x8 +#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10 + +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; /* in 10kHz unit */ + ULONG ulBootUpMemoryClock; /* in 10kHz unit */ + ULONG ulMaxSystemMemoryClock; /* in 10kHz unit */ + ULONG ulMinSystemMemoryClock; /* in 10kHz unit */ + UCHAR ucNumberOfCyclesInPeriodHi; + UCHAR ucLCDTimingSel; /* =0:not valid.!=0 sel this timing descriptor from LCD EDID. */ + USHORT usReserved1; + USHORT usInterNBVoltageLow; /* An intermidiate PMW value to set the voltage */ + USHORT usInterNBVoltageHigh; /* Another intermidiate PMW value to set the voltage */ + ULONG ulReserved[2]; + + USHORT usFSBClock; /* In MHz unit */ + USHORT usCapabilityFlag; /* Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable */ + /* Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card */ + /* Bit[4]==1: P/2 mode, ==0: P/1 mode */ + USHORT usPCIENBCfgReg7; /* bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal */ + USHORT usK8MemoryClock; /* in MHz unit */ + USHORT usK8SyncStartDelay; /* in 0.01 us unit */ + USHORT usK8DataReturnTime; /* in 0.01 us unit */ + UCHAR ucMaxNBVoltage; + UCHAR ucMinNBVoltage; + UCHAR ucMemoryType; /* [7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved */ + UCHAR ucNumberOfCyclesInPeriod; /* CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod */ + UCHAR ucStartingPWM_HighTime; /* CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime */ + UCHAR ucHTLinkWidth; /* 16 bit vs. 8 bit */ + UCHAR ucMaxNBVoltageHigh; + UCHAR ucMinNBVoltageHigh; +} ATOM_INTEGRATED_SYSTEM_INFO; + +/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO +ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock + For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock +ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0 + For AMD IGP,for now this can be 0 +ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0 + For AMD IGP,for now this can be 0 + +usFSBClock: For Intel IGP,it's FSB Freq + For AMD IGP,it's HT Link Speed + +usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200 +usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation +usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation + +VC:Voltage Control +ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. +ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. + +ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value. +ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0 + +ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. +ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. + +usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. +usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. +*/ + +/* +The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST; +Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need. +The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries. + +SW components can access the IGP system infor structure in the same way as before +*/ + +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 { + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; /* in 10kHz unit */ + ULONG ulReserved1[2]; /* must be 0x0 for the reserved */ + ULONG ulBootUpUMAClock; /* in 10kHz unit */ + ULONG ulBootUpSidePortClock; /* in 10kHz unit */ + ULONG ulMinSidePortClock; /* in 10kHz unit */ + ULONG ulReserved2[6]; /* must be 0x0 for the reserved */ + ULONG ulSystemConfig; /* see explanation below */ + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulDDISlot1Config; + ULONG ulDDISlot2Config; + UCHAR ucMemoryType; /* [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved */ + UCHAR ucUMAChannelNumber; + UCHAR ucDockingPinBit; + UCHAR ucDockingPinPolarity; + ULONG ulDockingPinCFGInfo; + ULONG ulCPUCapInfo; + USHORT usNumberOfCyclesInPeriod; + USHORT usMaxNBVoltage; + USHORT usMinNBVoltage; + USHORT usBootUpNBVoltage; + ULONG ulHTLinkFreq; /* in 10Khz */ + USHORT usMinHTLinkWidth; + USHORT usMaxHTLinkWidth; + USHORT usUMASyncStartDelay; + USHORT usUMADataReturnTime; + USHORT usLinkStatusZeroTime; + USHORT usReserved; + ULONG ulHighVoltageHTLinkFreq; /* in 10Khz */ + ULONG ulLowVoltageHTLinkFreq; /* in 10Khz */ + USHORT usMaxUpStreamHTLinkWidth; + USHORT usMaxDownStreamHTLinkWidth; + USHORT usMinUpStreamHTLinkWidth; + USHORT usMinDownStreamHTLinkWidth; + ULONG ulReserved3[97]; /* must be 0x0 */ +} ATOM_INTEGRATED_SYSTEM_INFO_V2; + +/* +ulBootUpEngineClock: Boot-up Engine Clock in 10Khz; +ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present +ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock + +ulSystemConfig: +Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode; +Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state + =0: system boots up at driver control state. Power state depends on PowerPlay table. +Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used. +Bit[3]=1: Only one power state(Performance) will be supported. + =0: Multiple power states supported from PowerPlay table. +Bit[4]=1: CLMC is supported and enabled on current system. + =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface. +Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement. + =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied. +Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored. + =0: Voltage settings is determined by powerplay table. +Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue. + =0: Enable CLMC as regular mode, CDLD and CILR will be enabled. + +ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions. + +ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion; + [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition; + +ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design). + [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12) + [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12) + [15:8] - Lane configuration attribute; + [23:16]- Connector type, possible value: + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D + CONNECTOR_OBJECT_ID_HDMI_TYPE_A + CONNECTOR_OBJECT_ID_DISPLAYPORT + [31:24]- Reserved + +ulDDISlot2Config: Same as Slot1. +ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC. +For IGP, Hypermemory is the only memory type showed in CCC. + +ucUMAChannelNumber: how many channels for the UMA; + +ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin +ucDockingPinBit: which bit in this register to read the pin status; +ucDockingPinPolarity:Polarity of the pin when docked; + +ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0 + +usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%. +usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode. +usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode. + GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0 + PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1 + GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE +usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value. + +ulHTLinkFreq: Bootup HT link Frequency in 10Khz. +usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth. + If CDLW enabled, both upstream and downstream width should be the same during bootup. +usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth. + If CDLW enabled, both upstream and downstream width should be the same during bootup. + +usUMASyncStartDelay: Memory access latency, required for watermark calculation +usUMADataReturnTime: Memory access latency, required for watermark calculation +usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us +for Griffin or Greyhound. SBIOS needs to convert to actual time by: + if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us) + if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us) + if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us) + if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us) + +ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0. + This must be less than or equal to ulHTLinkFreq(bootup frequency). +ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0. + This must be less than or equal to ulHighVoltageHTLinkFreq. + +usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now. +usMaxDownStreamHTLinkWidth: same as above. +usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now. +usMinDownStreamHTLinkWidth: same as above. +*/ + +#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 +#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 +#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004 +#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008 +#define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010 +#define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020 +#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040 +#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080 + +#define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF + +#define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F +#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0 +#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01 +#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02 +#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04 +#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08 + +#define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00 +#define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100 +#define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01 + +#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000 + +#define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000 +#define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001 +#define ATOM_TV_INT_ENCODER1_INDEX 0x00000002 +#define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003 +#define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004 +#define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005 +#define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006 +#define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007 +#define ATOM_CV_INT_ENCODER1_INDEX 0x00000008 +#define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009 +#define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A +#define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B +#define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C +#define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D + +/* define ASIC internal encoder id ( bit vector ) */ +#define ASIC_INT_DAC1_ENCODER_ID 0x00 +#define ASIC_INT_TV_ENCODER_ID 0x02 +#define ASIC_INT_DIG1_ENCODER_ID 0x03 +#define ASIC_INT_DAC2_ENCODER_ID 0x04 +#define ASIC_EXT_TV_ENCODER_ID 0x06 +#define ASIC_INT_DVO_ENCODER_ID 0x07 +#define ASIC_INT_DIG2_ENCODER_ID 0x09 +#define ASIC_EXT_DIG_ENCODER_ID 0x05 + +/* define Encoder attribute */ +#define ATOM_ANALOG_ENCODER 0 +#define ATOM_DIGITAL_ENCODER 1 + +#define ATOM_DEVICE_CRT1_INDEX 0x00000000 +#define ATOM_DEVICE_LCD1_INDEX 0x00000001 +#define ATOM_DEVICE_TV1_INDEX 0x00000002 +#define ATOM_DEVICE_DFP1_INDEX 0x00000003 +#define ATOM_DEVICE_CRT2_INDEX 0x00000004 +#define ATOM_DEVICE_LCD2_INDEX 0x00000005 +#define ATOM_DEVICE_TV2_INDEX 0x00000006 +#define ATOM_DEVICE_DFP2_INDEX 0x00000007 +#define ATOM_DEVICE_CV_INDEX 0x00000008 +#define ATOM_DEVICE_DFP3_INDEX 0x00000009 +#define ATOM_DEVICE_DFP4_INDEX 0x0000000A +#define ATOM_DEVICE_DFP5_INDEX 0x0000000B +#define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C +#define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D +#define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E +#define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F +#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1) +#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO +#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1) + +#define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1) + +#define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX) +#define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX) +#define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX) +#define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX) +#define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX) +#define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX) +#define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX) +#define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX) +#define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX) +#define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX) +#define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX ) +#define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX) + +#define ATOM_DEVICE_CRT_SUPPORT \ + (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT) +#define ATOM_DEVICE_DFP_SUPPORT \ + (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | \ + ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | \ + ATOM_DEVICE_DFP5_SUPPORT) +#define ATOM_DEVICE_TV_SUPPORT \ + (ATOM_DEVICE_TV1_SUPPORT | ATOM_DEVICE_TV2_SUPPORT) +#define ATOM_DEVICE_LCD_SUPPORT \ + (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT) + +#define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0 +#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004 +#define ATOM_DEVICE_CONNECTOR_VGA 0x00000001 +#define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002 +#define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003 +#define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004 +#define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005 +#define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006 +#define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007 +#define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008 +#define ATOM_DEVICE_CONNECTOR_SCART 0x00000009 +#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A +#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B +#define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E +#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F + +#define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F +#define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000 +#define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000 +#define ATOM_DEVICE_DAC_INFO_DACA 0x00000001 +#define ATOM_DEVICE_DAC_INFO_DACB 0x00000002 +#define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003 + +#define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000 + +#define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F +#define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000 + +#define ATOM_DEVICE_I2C_ID_MASK 0x00000070 +#define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004 +#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001 +#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002 +#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 /* For IGP RS600 */ +#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 /* For IGP RS690 */ + +#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080 +#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007 +#define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000 +#define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001 + +/* usDeviceSupport: */ +/* Bits0 = 0 - no CRT1 support= 1- CRT1 is supported */ +/* Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported */ +/* Bit 2 = 0 - no TV1 support= 1- TV1 is supported */ +/* Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported */ +/* Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported */ +/* Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported */ +/* Bit 6 = 0 - no TV2 support= 1- TV2 is supported */ +/* Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported */ +/* Bit 8 = 0 - no CV support= 1- CV is supported */ +/* Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported */ +/* Byte1 (Supported Device Info) */ +/* Bit 0 = = 0 - no CV support= 1- CV is supported */ +/* */ +/* */ + +/* ucI2C_ConfigID */ +/* [7:0] - I2C LINE Associate ID */ +/* = 0 - no I2C */ +/* [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection) */ +/* = 0, [6:0]=SW assisted I2C ID */ +/* [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use */ +/* = 2, HW engine for Multimedia use */ +/* = 3-7 Reserved for future I2C engines */ +/* [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C */ + +typedef struct _ATOM_I2C_ID_CONFIG { +#if ATOM_BIG_ENDIAN + UCHAR bfHW_Capable:1; + UCHAR bfHW_EngineID:3; + UCHAR bfI2C_LineMux:4; +#else + UCHAR bfI2C_LineMux:4; + UCHAR bfHW_EngineID:3; + UCHAR bfHW_Capable:1; +#endif +} ATOM_I2C_ID_CONFIG; + +typedef union _ATOM_I2C_ID_CONFIG_ACCESS { + ATOM_I2C_ID_CONFIG sbfAccess; + UCHAR ucAccess; +} ATOM_I2C_ID_CONFIG_ACCESS; + +/****************************************************************************/ +/* Structure used in GPIO_I2C_InfoTable */ +/****************************************************************************/ +typedef struct _ATOM_GPIO_I2C_ASSIGMENT { + USHORT usClkMaskRegisterIndex; + USHORT usClkEnRegisterIndex; + USHORT usClkY_RegisterIndex; + USHORT usClkA_RegisterIndex; + USHORT usDataMaskRegisterIndex; + USHORT usDataEnRegisterIndex; + USHORT usDataY_RegisterIndex; + USHORT usDataA_RegisterIndex; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; + UCHAR ucClkMaskShift; + UCHAR ucClkEnShift; + UCHAR ucClkY_Shift; + UCHAR ucClkA_Shift; + UCHAR ucDataMaskShift; + UCHAR ucDataEnShift; + UCHAR ucDataY_Shift; + UCHAR ucDataA_Shift; + UCHAR ucReserved1; + UCHAR ucReserved2; +} ATOM_GPIO_I2C_ASSIGMENT; + +typedef struct _ATOM_GPIO_I2C_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE]; +} ATOM_GPIO_I2C_INFO; + +/****************************************************************************/ +/* Common Structure used in other structures */ +/****************************************************************************/ + +#ifndef _H2INC + +/* Please don't add or expand this bitfield structure below, this one will retire soon.! */ +typedef struct _ATOM_MODE_MISC_INFO { +#if ATOM_BIG_ENDIAN + USHORT Reserved:6; + USHORT RGB888:1; + USHORT DoubleClock:1; + USHORT Interlace:1; + USHORT CompositeSync:1; + USHORT V_ReplicationBy2:1; + USHORT H_ReplicationBy2:1; + USHORT VerticalCutOff:1; + USHORT VSyncPolarity:1; /* 0=Active High, 1=Active Low */ + USHORT HSyncPolarity:1; /* 0=Active High, 1=Active Low */ + USHORT HorizontalCutOff:1; +#else + USHORT HorizontalCutOff:1; + USHORT HSyncPolarity:1; /* 0=Active High, 1=Active Low */ + USHORT VSyncPolarity:1; /* 0=Active High, 1=Active Low */ + USHORT VerticalCutOff:1; + USHORT H_ReplicationBy2:1; + USHORT V_ReplicationBy2:1; + USHORT CompositeSync:1; + USHORT Interlace:1; + USHORT DoubleClock:1; + USHORT RGB888:1; + USHORT Reserved:6; +#endif +} ATOM_MODE_MISC_INFO; + +typedef union _ATOM_MODE_MISC_INFO_ACCESS { + ATOM_MODE_MISC_INFO sbfAccess; + USHORT usAccess; +} ATOM_MODE_MISC_INFO_ACCESS; + +#else + +typedef union _ATOM_MODE_MISC_INFO_ACCESS { + USHORT usAccess; +} ATOM_MODE_MISC_INFO_ACCESS; + +#endif + +/* usModeMiscInfo- */ +#define ATOM_H_CUTOFF 0x01 +#define ATOM_HSYNC_POLARITY 0x02 /* 0=Active High, 1=Active Low */ +#define ATOM_VSYNC_POLARITY 0x04 /* 0=Active High, 1=Active Low */ +#define ATOM_V_CUTOFF 0x08 +#define ATOM_H_REPLICATIONBY2 0x10 +#define ATOM_V_REPLICATIONBY2 0x20 +#define ATOM_COMPOSITESYNC 0x40 +#define ATOM_INTERLACE 0x80 +#define ATOM_DOUBLE_CLOCK_MODE 0x100 +#define ATOM_RGB888_MODE 0x200 + +/* usRefreshRate- */ +#define ATOM_REFRESH_43 43 +#define ATOM_REFRESH_47 47 +#define ATOM_REFRESH_56 56 +#define ATOM_REFRESH_60 60 +#define ATOM_REFRESH_65 65 +#define ATOM_REFRESH_70 70 +#define ATOM_REFRESH_72 72 +#define ATOM_REFRESH_75 75 +#define ATOM_REFRESH_85 85 + +/* ATOM_MODE_TIMING data are exactly the same as VESA timing data. */ +/* Translation from EDID to ATOM_MODE_TIMING, use the following formula. */ +/* */ +/* VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK */ +/* = EDID_HA + EDID_HBL */ +/* VESA_HDISP = VESA_ACTIVE = EDID_HA */ +/* VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH */ +/* = EDID_HA + EDID_HSO */ +/* VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW */ +/* VESA_BORDER = EDID_BORDER */ + +/****************************************************************************/ +/* Structure used in SetCRTC_UsingDTDTimingTable */ +/****************************************************************************/ +typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS { + USHORT usH_Size; + USHORT usH_Blanking_Time; + USHORT usV_Size; + USHORT usV_Blanking_Time; + USHORT usH_SyncOffset; + USHORT usH_SyncWidth; + USHORT usV_SyncOffset; + USHORT usV_SyncWidth; + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + UCHAR ucH_Border; /* From DFP EDID */ + UCHAR ucV_Border; + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucPadding[3]; +} SET_CRTC_USING_DTD_TIMING_PARAMETERS; + +/****************************************************************************/ +/* Structure used in SetCRTC_TimingTable */ +/****************************************************************************/ +typedef struct _SET_CRTC_TIMING_PARAMETERS { + USHORT usH_Total; /* horizontal total */ + USHORT usH_Disp; /* horizontal display */ + USHORT usH_SyncStart; /* horozontal Sync start */ + USHORT usH_SyncWidth; /* horizontal Sync width */ + USHORT usV_Total; /* vertical total */ + USHORT usV_Disp; /* vertical display */ + USHORT usV_SyncStart; /* vertical Sync start */ + USHORT usV_SyncWidth; /* vertical Sync width */ + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + UCHAR ucCRTC; /* ATOM_CRTC1 or ATOM_CRTC2 */ + UCHAR ucOverscanRight; /* right */ + UCHAR ucOverscanLeft; /* left */ + UCHAR ucOverscanBottom; /* bottom */ + UCHAR ucOverscanTop; /* top */ + UCHAR ucReserved; +} SET_CRTC_TIMING_PARAMETERS; +#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS + +/****************************************************************************/ +/* Structure used in StandardVESA_TimingTable */ +/* AnalogTV_InfoTable */ +/* ComponentVideoInfoTable */ +/****************************************************************************/ +typedef struct _ATOM_MODE_TIMING { + USHORT usCRTC_H_Total; + USHORT usCRTC_H_Disp; + USHORT usCRTC_H_SyncStart; + USHORT usCRTC_H_SyncWidth; + USHORT usCRTC_V_Total; + USHORT usCRTC_V_Disp; + USHORT usCRTC_V_SyncStart; + USHORT usCRTC_V_SyncWidth; + USHORT usPixelClock; /* in 10Khz unit */ + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + USHORT usCRTC_OverscanRight; + USHORT usCRTC_OverscanLeft; + USHORT usCRTC_OverscanBottom; + USHORT usCRTC_OverscanTop; + USHORT usReserve; + UCHAR ucInternalModeNumber; + UCHAR ucRefreshRate; +} ATOM_MODE_TIMING; + +typedef struct _ATOM_DTD_FORMAT { + USHORT usPixClk; + USHORT usHActive; + USHORT usHBlanking_Time; + USHORT usVActive; + USHORT usVBlanking_Time; + USHORT usHSyncOffset; + USHORT usHSyncWidth; + USHORT usVSyncOffset; + USHORT usVSyncWidth; + USHORT usImageHSize; + USHORT usImageVSize; + UCHAR ucHBorder; + UCHAR ucVBorder; + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + UCHAR ucInternalModeNumber; + UCHAR ucRefreshRate; +} ATOM_DTD_FORMAT; + +/****************************************************************************/ +/* Structure used in LVDS_InfoTable */ +/* * Need a document to describe this table */ +/****************************************************************************/ +#define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 +#define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 +#define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 +#define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 + +/* Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. */ +/* Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL */ +#define LCDPANEL_CAP_READ_EDID 0x1 + +/* ucTableFormatRevision=1 */ +/* ucTableContentRevision=1 */ +typedef struct _ATOM_LVDS_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT sLCDTiming; + USHORT usModePatchTableOffset; + USHORT usSupportedRefreshRate; /* Refer to panel info table in ATOMBIOS extension Spec. */ + USHORT usOffDelayInMs; + UCHAR ucPowerSequenceDigOntoDEin10Ms; + UCHAR ucPowerSequenceDEtoBLOnin10Ms; + UCHAR ucLVDS_Misc; /* Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */ + /* Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */ + /* Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */ + /* Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */ + UCHAR ucPanelDefaultRefreshRate; + UCHAR ucPanelIdentification; + UCHAR ucSS_Id; +} ATOM_LVDS_INFO; + +/* ucTableFormatRevision=1 */ +/* ucTableContentRevision=2 */ +typedef struct _ATOM_LVDS_INFO_V12 { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT sLCDTiming; + USHORT usExtInfoTableOffset; + USHORT usSupportedRefreshRate; /* Refer to panel info table in ATOMBIOS extension Spec. */ + USHORT usOffDelayInMs; + UCHAR ucPowerSequenceDigOntoDEin10Ms; + UCHAR ucPowerSequenceDEtoBLOnin10Ms; + UCHAR ucLVDS_Misc; /* Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */ + /* Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */ + /* Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */ + /* Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */ + UCHAR ucPanelDefaultRefreshRate; + UCHAR ucPanelIdentification; + UCHAR ucSS_Id; + USHORT usLCDVenderID; + USHORT usLCDProductID; + UCHAR ucLCDPanel_SpecialHandlingCap; + UCHAR ucPanelInfoSize; /* start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable */ + UCHAR ucReserved[2]; +} ATOM_LVDS_INFO_V12; + +#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 + +typedef struct _ATOM_PATCH_RECORD_MODE { + UCHAR ucRecordType; + USHORT usHDisp; + USHORT usVDisp; +} ATOM_PATCH_RECORD_MODE; + +typedef struct _ATOM_LCD_RTS_RECORD { + UCHAR ucRecordType; + UCHAR ucRTSValue; +} ATOM_LCD_RTS_RECORD; + +/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */ +typedef struct _ATOM_LCD_MODE_CONTROL_CAP { + UCHAR ucRecordType; + USHORT usLCDCap; +} ATOM_LCD_MODE_CONTROL_CAP; + +#define LCD_MODE_CAP_BL_OFF 1 +#define LCD_MODE_CAP_CRTC_OFF 2 +#define LCD_MODE_CAP_PANEL_OFF 4 + +typedef struct _ATOM_FAKE_EDID_PATCH_RECORD { + UCHAR ucRecordType; + UCHAR ucFakeEDIDLength; + UCHAR ucFakeEDIDString[1]; /* This actually has ucFakeEdidLength elements. */ +} ATOM_FAKE_EDID_PATCH_RECORD; + +typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD { + UCHAR ucRecordType; + USHORT usHSize; + USHORT usVSize; +} ATOM_PANEL_RESOLUTION_PATCH_RECORD; + +#define LCD_MODE_PATCH_RECORD_MODE_TYPE 1 +#define LCD_RTS_RECORD_TYPE 2 +#define LCD_CAP_RECORD_TYPE 3 +#define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4 +#define LCD_PANEL_RESOLUTION_RECORD_TYPE 5 +#define ATOM_RECORD_END_TYPE 0xFF + +/****************************Spread Spectrum Info Table Definitions **********************/ + +/* ucTableFormatRevision=1 */ +/* ucTableContentRevision=2 */ +typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT { + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; /* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */ + UCHAR ucSS_Step; + UCHAR ucSS_Delay; + UCHAR ucSS_Id; + UCHAR ucRecommandedRef_Div; + UCHAR ucSS_Range; /* it was reserved for V11 */ +} ATOM_SPREAD_SPECTRUM_ASSIGNMENT; + +#define ATOM_MAX_SS_ENTRY 16 +#define ATOM_DP_SS_ID1 0x0f1 /* SS modulation freq=30k */ +#define ATOM_DP_SS_ID2 0x0f2 /* SS modulation freq=33k */ + +#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000 +#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000 +#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001 +#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001 +#define ATOM_INTERNAL_SS_MASK 0x00000000 +#define ATOM_EXTERNAL_SS_MASK 0x00000002 +#define EXEC_SS_STEP_SIZE_SHIFT 2 +#define EXEC_SS_DELAY_SHIFT 4 +#define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4 + +typedef struct _ATOM_SPREAD_SPECTRUM_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY]; +} ATOM_SPREAD_SPECTRUM_INFO; + +/****************************************************************************/ +/* Structure used in AnalogTV_InfoTable (Top level) */ +/****************************************************************************/ +/* ucTVBootUpDefaultStd definiton: */ + +/* ATOM_TV_NTSC 1 */ +/* ATOM_TV_NTSCJ 2 */ +/* ATOM_TV_PAL 3 */ +/* ATOM_TV_PALM 4 */ +/* ATOM_TV_PALCN 5 */ +/* ATOM_TV_PALN 6 */ +/* ATOM_TV_PAL60 7 */ +/* ATOM_TV_SECAM 8 */ + +/* ucTVSuppportedStd definition: */ +#define NTSC_SUPPORT 0x1 +#define NTSCJ_SUPPORT 0x2 + +#define PAL_SUPPORT 0x4 +#define PALM_SUPPORT 0x8 +#define PALCN_SUPPORT 0x10 +#define PALN_SUPPORT 0x20 +#define PAL60_SUPPORT 0x40 +#define SECAM_SUPPORT 0x80 + +#define MAX_SUPPORTED_TV_TIMING 2 + +typedef struct _ATOM_ANALOG_TV_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucTV_SupportedStandard; + UCHAR ucTV_BootUpDefaultStandard; + UCHAR ucExt_TV_ASIC_ID; + UCHAR ucExt_TV_ASIC_SlaveAddr; + /*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING]; */ + ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING]; +} ATOM_ANALOG_TV_INFO; + +/**************************************************************************/ +/* VRAM usage and their defintions */ + +/* One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */ +/* Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */ +/* All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! */ +/* To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR */ +/* To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX */ + +#ifndef VESA_MEMORY_IN_64K_BLOCK +#define VESA_MEMORY_IN_64K_BLOCK 0x100 /* 256*64K=16Mb (Max. VESA memory is 16Mb!) */ +#endif + +#define ATOM_EDID_RAW_DATASIZE 256 /* In Bytes */ +#define ATOM_HWICON_SURFACE_SIZE 4096 /* In Bytes */ +#define ATOM_HWICON_INFOTABLE_SIZE 32 +#define MAX_DTD_MODE_IN_VRAM 6 +#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) /* 28= (SIZEOF ATOM_DTD_FORMAT) */ +#define ATOM_STD_MODE_SUPPORT_TBL_SIZE (32*8) /* 32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) */ +#define DFP_ENCODER_TYPE_OFFSET 0x80 +#define DP_ENCODER_LANE_NUM_OFFSET 0x84 +#define DP_ENCODER_LINK_RATE_OFFSET 0x88 + +#define ATOM_HWICON1_SURFACE_ADDR 0 +#define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) +#define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) +#define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE) +#define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_TV2_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_TV2_DTD_MODE_TBL_ADDR (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_TV2_STD_MODE_TBL_ADDR (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP2_EDID_ADDR (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 256) +#define ATOM_STACK_STORAGE_END (ATOM_STACK_STORAGE_START + 512) + +/* The size below is in Kb! */ +#define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC) + +#define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L +#define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30 +#define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1 +#define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0 + +/***********************************************************************************/ +/* Structure used in VRAM_UsageByFirmwareTable */ +/* Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm */ +/* at running time. */ +/* note2: From RV770, the memory is more than 32bit addressable, so we will change */ +/* ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains */ +/* exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware */ +/* (in offset to start of memory address) is KB aligned instead of byte aligend. */ +/***********************************************************************************/ +#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1 + +typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO { + ULONG ulStartAddrUsedByFirmware; + USHORT usFirmwareUseInKb; + USHORT usReserved; +} ATOM_FIRMWARE_VRAM_RESERVE_INFO; + +typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_FIRMWARE_VRAM_RESERVE_INFO + asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO]; +} ATOM_VRAM_USAGE_BY_FIRMWARE; + +/****************************************************************************/ +/* Structure used in GPIO_Pin_LUTTable */ +/****************************************************************************/ +typedef struct _ATOM_GPIO_PIN_ASSIGNMENT { + USHORT usGpioPin_AIndex; + UCHAR ucGpioPinBitShift; + UCHAR ucGPIO_ID; +} ATOM_GPIO_PIN_ASSIGNMENT; + +typedef struct _ATOM_GPIO_PIN_LUT { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1]; +} ATOM_GPIO_PIN_LUT; + +/****************************************************************************/ +/* Structure used in ComponentVideoInfoTable */ +/****************************************************************************/ +#define GPIO_PIN_ACTIVE_HIGH 0x1 + +#define MAX_SUPPORTED_CV_STANDARDS 5 + +/* definitions for ATOM_D_INFO.ucSettings */ +#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F /* [4:0] */ +#define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 /* [6:5] = must be zeroed out */ +#define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 /* [7] */ + +typedef struct _ATOM_GPIO_INFO { + USHORT usAOffset; + UCHAR ucSettings; + UCHAR ucReserved; +} ATOM_GPIO_INFO; + +/* definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) */ +#define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2 + +/* definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i */ +#define ATOM_GPIO_DEFAULT_MODE_EN 0x80 /* [7]; */ +#define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F /* [6:0] */ + +/* definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode */ +/* Line 3 out put 5V. */ +#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 /* represent gpio 3 state for 16:9 */ +#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 /* represent gpio 4 state for 16:9 */ +#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0 + +/* Line 3 out put 2.2V */ +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 /* represent gpio 3 state for 4:3 Letter box */ +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 /* represent gpio 4 state for 4:3 Letter box */ +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2 + +/* Line 3 out put 0V */ +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 /* represent gpio 3 state for 4:3 */ +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 /* represent gpio 4 state for 4:3 */ +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4 + +#define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F /* bit [5:0] */ + +#define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 /* bit 7 */ + +/* GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. */ +#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 /* bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */ +#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 /* bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */ + +typedef struct _ATOM_COMPONENT_VIDEO_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMask_PinRegisterIndex; + USHORT usEN_PinRegisterIndex; + USHORT usY_PinRegisterIndex; + USHORT usA_PinRegisterIndex; + UCHAR ucBitShift; + UCHAR ucPinActiveState; /* ucPinActiveState: Bit0=1 active high, =0 active low */ + ATOM_DTD_FORMAT sReserved; /* must be zeroed out */ + UCHAR ucMiscInfo; + UCHAR uc480i; + UCHAR uc480p; + UCHAR uc720p; + UCHAR uc1080i; + UCHAR ucLetterBoxMode; + UCHAR ucReserved[3]; + UCHAR ucNumOfWbGpioBlocks; /* For Component video D-Connector support. If zere, NTSC type connector */ + ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS]; + ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS]; +} ATOM_COMPONENT_VIDEO_INFO; + +/* ucTableFormatRevision=2 */ +/* ucTableContentRevision=1 */ +typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucMiscInfo; + UCHAR uc480i; + UCHAR uc480p; + UCHAR uc720p; + UCHAR uc1080i; + UCHAR ucReserved; + UCHAR ucLetterBoxMode; + UCHAR ucNumOfWbGpioBlocks; /* For Component video D-Connector support. If zere, NTSC type connector */ + ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS]; + ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS]; +} ATOM_COMPONENT_VIDEO_INFO_V21; + +#define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21 + +/****************************************************************************/ +/* Structure used in object_InfoTable */ +/****************************************************************************/ +typedef struct _ATOM_OBJECT_HEADER { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + USHORT usConnectorObjectTableOffset; + USHORT usRouterObjectTableOffset; + USHORT usEncoderObjectTableOffset; + USHORT usProtectionObjectTableOffset; /* only available when Protection block is independent. */ + USHORT usDisplayPathTableOffset; +} ATOM_OBJECT_HEADER; + +typedef struct _ATOM_DISPLAY_OBJECT_PATH { + USHORT usDeviceTag; /* supported device */ + USHORT usSize; /* the size of ATOM_DISPLAY_OBJECT_PATH */ + USHORT usConnObjectId; /* Connector Object ID */ + USHORT usGPUObjectId; /* GPU ID */ + USHORT usGraphicObjIds[1]; /* 1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. */ +} ATOM_DISPLAY_OBJECT_PATH; + +typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE { + UCHAR ucNumOfDispPath; + UCHAR ucVersion; + UCHAR ucPadding[2]; + ATOM_DISPLAY_OBJECT_PATH asDispPath[1]; +} ATOM_DISPLAY_OBJECT_PATH_TABLE; + +typedef struct _ATOM_OBJECT /* each object has this structure */ +{ + USHORT usObjectID; + USHORT usSrcDstTableOffset; + USHORT usRecordOffset; /* this pointing to a bunch of records defined below */ + USHORT usReserved; +} ATOM_OBJECT; + +typedef struct _ATOM_OBJECT_TABLE /* Above 4 object table offset pointing to a bunch of objects all have this structure */ +{ + UCHAR ucNumberOfObjects; + UCHAR ucPadding[3]; + ATOM_OBJECT asObjects[1]; +} ATOM_OBJECT_TABLE; + +typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT /* usSrcDstTableOffset pointing to this structure */ +{ + UCHAR ucNumberOfSrc; + USHORT usSrcObjectID[1]; + UCHAR ucNumberOfDst; + USHORT usDstObjectID[1]; +} ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT; + +/* Related definitions, all records are differnt but they have a commond header */ +typedef struct _ATOM_COMMON_RECORD_HEADER { + UCHAR ucRecordType; /* An emun to indicate the record type */ + UCHAR ucRecordSize; /* The size of the whole record in byte */ +} ATOM_COMMON_RECORD_HEADER; + +#define ATOM_I2C_RECORD_TYPE 1 +#define ATOM_HPD_INT_RECORD_TYPE 2 +#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3 +#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4 +#define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */ +#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */ +#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7 +#define ATOM_JTAG_RECORD_TYPE 8 /* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */ +#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9 +#define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10 +#define ATOM_CONNECTOR_CF_RECORD_TYPE 11 +#define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12 +#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13 +#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14 +#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15 + +/* Must be updated when new record type is added,equal to that record definition! */ +#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_CF_RECORD_TYPE + +typedef struct _ATOM_I2C_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + ATOM_I2C_ID_CONFIG sucI2cId; + UCHAR ucI2CAddr; /* The slave address, it's 0 when the record is attached to connector for DDC */ +} ATOM_I2C_RECORD; + +typedef struct _ATOM_HPD_INT_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucHPDIntGPIOID; /* Corresponding block in GPIO_PIN_INFO table gives the pin info */ + UCHAR ucPluggged_PinState; +} ATOM_HPD_INT_RECORD; + +typedef struct _ATOM_OUTPUT_PROTECTION_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucProtectionFlag; + UCHAR ucReserved; +} ATOM_OUTPUT_PROTECTION_RECORD; + +typedef struct _ATOM_CONNECTOR_DEVICE_TAG { + ULONG ulACPIDeviceEnum; /* Reserved for now */ + USHORT usDeviceID; /* This Id is same as "ATOM_DEVICE_XXX_SUPPORT" */ + USHORT usPadding; +} ATOM_CONNECTOR_DEVICE_TAG; + +typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucNumberOfDevice; + UCHAR ucReserved; + ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; /* This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation */ +} ATOM_CONNECTOR_DEVICE_TAG_RECORD; + +typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucConfigGPIOID; + UCHAR ucConfigGPIOState; /* Set to 1 when it's active high to enable external flow in */ + UCHAR ucFlowinGPIPID; + UCHAR ucExtInGPIPID; +} ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD; + +typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucCTL1GPIO_ID; + UCHAR ucCTL1GPIOState; /* Set to 1 when it's active high */ + UCHAR ucCTL2GPIO_ID; + UCHAR ucCTL2GPIOState; /* Set to 1 when it's active high */ + UCHAR ucCTL3GPIO_ID; + UCHAR ucCTL3GPIOState; /* Set to 1 when it's active high */ + UCHAR ucCTLFPGA_IN_ID; + UCHAR ucPadding[3]; +} ATOM_ENCODER_FPGA_CONTROL_RECORD; + +typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucGPIOID; /* Corresponding block in GPIO_PIN_INFO table gives the pin info */ + UCHAR ucTVActiveState; /* Indicating when the pin==0 or 1 when TV is connected */ +} ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD; + +typedef struct _ATOM_JTAG_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucTMSGPIO_ID; + UCHAR ucTMSGPIOState; /* Set to 1 when it's active high */ + UCHAR ucTCKGPIO_ID; + UCHAR ucTCKGPIOState; /* Set to 1 when it's active high */ + UCHAR ucTDOGPIO_ID; + UCHAR ucTDOGPIOState; /* Set to 1 when it's active high */ + UCHAR ucTDIGPIO_ID; + UCHAR ucTDIGPIOState; /* Set to 1 when it's active high */ + UCHAR ucPadding[2]; +} ATOM_JTAG_RECORD; + +/* The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually */ +typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR { + UCHAR ucGPIOID; /* GPIO_ID, find the corresponding ID in GPIO_LUT table */ + UCHAR ucGPIO_PinState; /* Pin state showing how to set-up the pin */ +} ATOM_GPIO_PIN_CONTROL_PAIR; + +typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucFlags; /* Future expnadibility */ + UCHAR ucNumberOfPins; /* Number of GPIO pins used to control the object */ + ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; /* the real gpio pin pair determined by number of pins ucNumberOfPins */ +} ATOM_OBJECT_GPIO_CNTL_RECORD; + +/* Definitions for GPIO pin state */ +#define GPIO_PIN_TYPE_INPUT 0x00 +#define GPIO_PIN_TYPE_OUTPUT 0x10 +#define GPIO_PIN_TYPE_HW_CONTROL 0x20 + +/* For GPIO_PIN_TYPE_OUTPUT the following is defined */ +#define GPIO_PIN_OUTPUT_STATE_MASK 0x01 +#define GPIO_PIN_OUTPUT_STATE_SHIFT 0 +#define GPIO_PIN_STATE_ACTIVE_LOW 0x0 +#define GPIO_PIN_STATE_ACTIVE_HIGH 0x1 + +typedef struct _ATOM_ENCODER_DVO_CF_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + ULONG ulStrengthControl; /* DVOA strength control for CF */ + UCHAR ucPadding[2]; +} ATOM_ENCODER_DVO_CF_RECORD; + +/* value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle */ +#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1 +#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2 + +typedef struct _ATOM_CONNECTOR_CF_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + USHORT usMaxPixClk; + UCHAR ucFlowCntlGpioId; + UCHAR ucSwapCntlGpioId; + UCHAR ucConnectedDvoBundle; + UCHAR ucPadding; +} ATOM_CONNECTOR_CF_RECORD; + +typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + ATOM_DTD_FORMAT asTiming; +} ATOM_CONNECTOR_HARDCODE_DTD_RECORD; + +typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; /* ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE */ + UCHAR ucSubConnectorType; /* CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A */ + UCHAR ucReserved; +} ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD; + +typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucMuxType; /* decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state */ + UCHAR ucMuxControlPin; + UCHAR ucMuxState[2]; /* for alligment purpose */ +} ATOM_ROUTER_DDC_PATH_SELECT_RECORD; + +typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD { + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucMuxType; + UCHAR ucMuxControlPin; + UCHAR ucMuxState[2]; /* for alligment purpose */ +} ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD; + +/* define ucMuxType */ +#define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f +#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01 + +/****************************************************************************/ +/* ASIC voltage data table */ +/****************************************************************************/ +typedef struct _ATOM_VOLTAGE_INFO_HEADER { + USHORT usVDDCBaseLevel; /* In number of 50mv unit */ + USHORT usReserved; /* For possible extension table offset */ + UCHAR ucNumOfVoltageEntries; + UCHAR ucBytesPerVoltageEntry; + UCHAR ucVoltageStep; /* Indicating in how many mv increament is one step, 0.5mv unit */ + UCHAR ucDefaultVoltageEntry; + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; +} ATOM_VOLTAGE_INFO_HEADER; + +typedef struct _ATOM_VOLTAGE_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_INFO_HEADER viHeader; + UCHAR ucVoltageEntries[64]; /* 64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry */ +} ATOM_VOLTAGE_INFO; + +typedef struct _ATOM_VOLTAGE_FORMULA { + USHORT usVoltageBaseLevel; /* In number of 1mv unit */ + USHORT usVoltageStep; /* Indicating in how many mv increament is one step, 1mv unit */ + UCHAR ucNumOfVoltageEntries; /* Number of Voltage Entry, which indicate max Voltage */ + UCHAR ucFlag; /* bit0=0 :step is 1mv =1 0.5mv */ + UCHAR ucBaseVID; /* if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep */ + UCHAR ucReserved; + UCHAR ucVIDAdjustEntries[32]; /* 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries */ +} ATOM_VOLTAGE_FORMULA; + +typedef struct _ATOM_VOLTAGE_CONTROL { + UCHAR ucVoltageControlId; /* Indicate it is controlled by I2C or GPIO or HW state machine */ + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; + USHORT usGpioPin_AIndex; /* GPIO_PAD register index */ + UCHAR ucGpioPinBitShift[9]; /* at most 8 pin support 255 VIDs, termintate with 0xff */ + UCHAR ucReserved; +} ATOM_VOLTAGE_CONTROL; + +/* Define ucVoltageControlId */ +#define VOLTAGE_CONTROLLED_BY_HW 0x00 +#define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F +#define VOLTAGE_CONTROLLED_BY_GPIO 0x80 +#define VOLTAGE_CONTROL_ID_LM64 0x01 /* I2C control, used for R5xx Core Voltage */ +#define VOLTAGE_CONTROL_ID_DAC 0x02 /* I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI */ +#define VOLTAGE_CONTROL_ID_VT116xM 0x03 /* I2C control, used for R6xx Core Voltage */ +#define VOLTAGE_CONTROL_ID_DS4402 0x04 + +typedef struct _ATOM_VOLTAGE_OBJECT { + UCHAR ucVoltageType; /* Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI */ + UCHAR ucSize; /* Size of Object */ + ATOM_VOLTAGE_CONTROL asControl; /* describ how to control */ + ATOM_VOLTAGE_FORMULA asFormula; /* Indicate How to convert real Voltage to VID */ +} ATOM_VOLTAGE_OBJECT; + +typedef struct _ATOM_VOLTAGE_OBJECT_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_OBJECT asVoltageObj[3]; /* Info for Voltage control */ +} ATOM_VOLTAGE_OBJECT_INFO; + +typedef struct _ATOM_LEAKID_VOLTAGE { + UCHAR ucLeakageId; + UCHAR ucReserved; + USHORT usVoltage; +} ATOM_LEAKID_VOLTAGE; + +typedef struct _ATOM_ASIC_PROFILE_VOLTAGE { + UCHAR ucProfileId; + UCHAR ucReserved; + USHORT usSize; + USHORT usEfuseSpareStartAddr; + USHORT usFuseIndex[8]; /* from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, */ + ATOM_LEAKID_VOLTAGE asLeakVol[2]; /* Leakid and relatd voltage */ +} ATOM_ASIC_PROFILE_VOLTAGE; + +/* ucProfileId */ +#define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1 +#define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1 +#define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2 + +typedef struct _ATOM_ASIC_PROFILING_INFO { + ATOM_COMMON_TABLE_HEADER asHeader; + ATOM_ASIC_PROFILE_VOLTAGE asVoltage; +} ATOM_ASIC_PROFILING_INFO; + +typedef struct _ATOM_POWER_SOURCE_OBJECT { + UCHAR ucPwrSrcId; /* Power source */ + UCHAR ucPwrSensorType; /* GPIO, I2C or none */ + UCHAR ucPwrSensId; /* if GPIO detect, it is GPIO id, if I2C detect, it is I2C id */ + UCHAR ucPwrSensSlaveAddr; /* Slave address if I2C detect */ + UCHAR ucPwrSensRegIndex; /* I2C register Index if I2C detect */ + UCHAR ucPwrSensRegBitMask; /* detect which bit is used if I2C detect */ + UCHAR ucPwrSensActiveState; /* high active or low active */ + UCHAR ucReserve[3]; /* reserve */ + USHORT usSensPwr; /* in unit of watt */ +} ATOM_POWER_SOURCE_OBJECT; + +typedef struct _ATOM_POWER_SOURCE_INFO { + ATOM_COMMON_TABLE_HEADER asHeader; + UCHAR asPwrbehave[16]; + ATOM_POWER_SOURCE_OBJECT asPwrObj[1]; +} ATOM_POWER_SOURCE_INFO; + +/* Define ucPwrSrcId */ +#define POWERSOURCE_PCIE_ID1 0x00 +#define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01 +#define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02 +#define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04 +#define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08 + +/* define ucPwrSensorId */ +#define POWER_SENSOR_ALWAYS 0x00 +#define POWER_SENSOR_GPIO 0x01 +#define POWER_SENSOR_I2C 0x02 + +/**************************************************************************/ +/* This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design */ +/* Memory SS Info Table */ +/* Define Memory Clock SS chip ID */ +#define ICS91719 1 +#define ICS91720 2 + +/* Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol */ +typedef struct _ATOM_I2C_DATA_RECORD { + UCHAR ucNunberOfBytes; /* Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" */ + UCHAR ucI2CData[1]; /* I2C data in bytes, should be less than 16 bytes usually */ +} ATOM_I2C_DATA_RECORD; + +/* Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information */ +typedef struct _ATOM_I2C_DEVICE_SETUP_INFO { + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; /* I2C line and HW/SW assisted cap. */ + UCHAR ucSSChipID; /* SS chip being used */ + UCHAR ucSSChipSlaveAddr; /* Slave Address to set up this SS chip */ + UCHAR ucNumOfI2CDataRecords; /* number of data block */ + ATOM_I2C_DATA_RECORD asI2CData[1]; +} ATOM_I2C_DEVICE_SETUP_INFO; + +/* ========================================================================================== */ +typedef struct _ATOM_ASIC_MVDD_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1]; +} ATOM_ASIC_MVDD_INFO; + +/* ========================================================================================== */ +#define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO + +/* ========================================================================================== */ +/**************************************************************************/ + +typedef struct _ATOM_ASIC_SS_ASSIGNMENT { + ULONG ulTargetClockRange; /* Clock Out frequence (VCO ), in unit of 10Khz */ + USHORT usSpreadSpectrumPercentage; /* in unit of 0.01% */ + USHORT usSpreadRateInKhz; /* in unit of kHz, modulation freq */ + UCHAR ucClockIndication; /* Indicate which clock source needs SS */ + UCHAR ucSpreadSpectrumMode; /* Bit1=0 Down Spread,=1 Center Spread. */ + UCHAR ucReserved[2]; +} ATOM_ASIC_SS_ASSIGNMENT; + +/* Define ucSpreadSpectrumType */ +#define ASIC_INTERNAL_MEMORY_SS 1 +#define ASIC_INTERNAL_ENGINE_SS 2 +#define ASIC_INTERNAL_UVD_SS 3 + +typedef struct _ATOM_ASIC_INTERNAL_SS_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4]; +} ATOM_ASIC_INTERNAL_SS_INFO; + +/* ==============================Scratch Pad Definition Portion=============================== */ +#define ATOM_DEVICE_CONNECT_INFO_DEF 0 +#define ATOM_ROM_LOCATION_DEF 1 +#define ATOM_TV_STANDARD_DEF 2 +#define ATOM_ACTIVE_INFO_DEF 3 +#define ATOM_LCD_INFO_DEF 4 +#define ATOM_DOS_REQ_INFO_DEF 5 +#define ATOM_ACC_CHANGE_INFO_DEF 6 +#define ATOM_DOS_MODE_INFO_DEF 7 +#define ATOM_I2C_CHANNEL_STATUS_DEF 8 +#define ATOM_I2C_CHANNEL_STATUS1_DEF 9 + +/* BIOS_0_SCRATCH Definition */ +#define ATOM_S0_CRT1_MONO 0x00000001L +#define ATOM_S0_CRT1_COLOR 0x00000002L +#define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR) + +#define ATOM_S0_TV1_COMPOSITE_A 0x00000004L +#define ATOM_S0_TV1_SVIDEO_A 0x00000008L +#define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A) + +#define ATOM_S0_CV_A 0x00000010L +#define ATOM_S0_CV_DIN_A 0x00000020L +#define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A) + +#define ATOM_S0_CRT2_MONO 0x00000100L +#define ATOM_S0_CRT2_COLOR 0x00000200L +#define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR) + +#define ATOM_S0_TV1_COMPOSITE 0x00000400L +#define ATOM_S0_TV1_SVIDEO 0x00000800L +#define ATOM_S0_TV1_SCART 0x00004000L +#define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART) + +#define ATOM_S0_CV 0x00001000L +#define ATOM_S0_CV_DIN 0x00002000L +#define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN) + +#define ATOM_S0_DFP1 0x00010000L +#define ATOM_S0_DFP2 0x00020000L +#define ATOM_S0_LCD1 0x00040000L +#define ATOM_S0_LCD2 0x00080000L +#define ATOM_S0_TV2 0x00100000L +#define ATOM_S0_DFP3 0x00200000L +#define ATOM_S0_DFP4 0x00400000L +#define ATOM_S0_DFP5 0x00800000L + +#define ATOM_S0_DFP_MASK \ + (ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5) + +#define ATOM_S0_FAD_REGISTER_BUG 0x02000000L /* If set, indicates we are running a PCIE asic with */ + /* the FAD/HDP reg access bug. Bit is read by DAL */ + +#define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L +#define ATOM_S0_THERMAL_STATE_SHIFT 26 + +#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L +#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29 + +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1 +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2 +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 + +/* Byte aligned defintion for BIOS usage */ +#define ATOM_S0_CRT1_MONOb0 0x01 +#define ATOM_S0_CRT1_COLORb0 0x02 +#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) + +#define ATOM_S0_TV1_COMPOSITEb0 0x04 +#define ATOM_S0_TV1_SVIDEOb0 0x08 +#define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0) + +#define ATOM_S0_CVb0 0x10 +#define ATOM_S0_CV_DINb0 0x20 +#define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0) + +#define ATOM_S0_CRT2_MONOb1 0x01 +#define ATOM_S0_CRT2_COLORb1 0x02 +#define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1) + +#define ATOM_S0_TV1_COMPOSITEb1 0x04 +#define ATOM_S0_TV1_SVIDEOb1 0x08 +#define ATOM_S0_TV1_SCARTb1 0x40 +#define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1) + +#define ATOM_S0_CVb1 0x10 +#define ATOM_S0_CV_DINb1 0x20 +#define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1) + +#define ATOM_S0_DFP1b2 0x01 +#define ATOM_S0_DFP2b2 0x02 +#define ATOM_S0_LCD1b2 0x04 +#define ATOM_S0_LCD2b2 0x08 +#define ATOM_S0_TV2b2 0x10 +#define ATOM_S0_DFP3b2 0x20 + +#define ATOM_S0_THERMAL_STATE_MASKb3 0x1C +#define ATOM_S0_THERMAL_STATE_SHIFTb3 2 + +#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0 +#define ATOM_S0_LCD1_SHIFT 18 + +/* BIOS_1_SCRATCH Definition */ +#define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL +#define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L + +/* BIOS_2_SCRATCH Definition */ +#define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL +#define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L +#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8 + +#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L +#define ATOM_S2_LCD1_DPMS_STATE 0x00020000L +#define ATOM_S2_TV1_DPMS_STATE 0x00040000L +#define ATOM_S2_DFP1_DPMS_STATE 0x00080000L +#define ATOM_S2_CRT2_DPMS_STATE 0x00100000L +#define ATOM_S2_LCD2_DPMS_STATE 0x00200000L +#define ATOM_S2_TV2_DPMS_STATE 0x00400000L +#define ATOM_S2_DFP2_DPMS_STATE 0x00800000L +#define ATOM_S2_CV_DPMS_STATE 0x01000000L +#define ATOM_S2_DFP3_DPMS_STATE 0x02000000L +#define ATOM_S2_DFP4_DPMS_STATE 0x04000000L +#define ATOM_S2_DFP5_DPMS_STATE 0x08000000L + +#define ATOM_S2_DFP_DPM_STATE \ + (ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | \ + ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | \ + ATOM_S2_DFP5_DPMS_STATE) + +#define ATOM_S2_DEVICE_DPMS_STATE \ + (ATOM_S2_CRT1_DPMS_STATE + ATOM_S2_LCD1_DPMS_STATE + \ + ATOM_S2_TV1_DPMS_STATE + ATOM_S2_DFP_DPMS_STATE + \ + ATOM_S2_CRT2_DPMS_STATE + ATOM_S2_LCD2_DPMS_STATE + \ + ATOM_S2_TV2_DPMS_STATE + ATOM_S2_CV_DPMS_STATE) + +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26 +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L + +#define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L + +#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0 +#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1 +#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2 +#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3 +#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30 +#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L + +/* Byte aligned defintion for BIOS usage */ +#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F +#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF +#define ATOM_S2_CRT1_DPMS_STATEb2 0x01 +#define ATOM_S2_LCD1_DPMS_STATEb2 0x02 +#define ATOM_S2_TV1_DPMS_STATEb2 0x04 +#define ATOM_S2_DFP1_DPMS_STATEb2 0x08 +#define ATOM_S2_CRT2_DPMS_STATEb2 0x10 +#define ATOM_S2_LCD2_DPMS_STATEb2 0x20 +#define ATOM_S2_TV2_DPMS_STATEb2 0x40 +#define ATOM_S2_DFP2_DPMS_STATEb2 0x80 +#define ATOM_S2_CV_DPMS_STATEb3 0x01 +#define ATOM_S2_DFP3_DPMS_STATEb3 0x02 +#define ATOM_S2_DFP4_DPMS_STATEb3 0x04 +#define ATOM_S2_DFP5_DPMS_STATEb3 0x08 + +#define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10 +#define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20 +#define ATOM_S2_ROTATION_STATE_MASKb3 0xC0 + +/* BIOS_3_SCRATCH Definition */ +#define ATOM_S3_CRT1_ACTIVE 0x00000001L +#define ATOM_S3_LCD1_ACTIVE 0x00000002L +#define ATOM_S3_TV1_ACTIVE 0x00000004L +#define ATOM_S3_DFP1_ACTIVE 0x00000008L +#define ATOM_S3_CRT2_ACTIVE 0x00000010L +#define ATOM_S3_LCD2_ACTIVE 0x00000020L +#define ATOM_S3_TV2_ACTIVE 0x00000040L +#define ATOM_S3_DFP2_ACTIVE 0x00000080L +#define ATOM_S3_CV_ACTIVE 0x00000100L +#define ATOM_S3_DFP3_ACTIVE 0x00000200L +#define ATOM_S3_DFP4_ACTIVE 0x00000400L +#define ATOM_S3_DFP5_ACTIVE 0x00000800L + +#define ATOM_S3_DEVICE_ACTIVE_MASK 0x000003FFL + +#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L +#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L + +#define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L +#define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L +#define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L +#define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L +#define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L +#define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L +#define ATOM_S3_TV2_CRTC_ACTIVE 0x00400000L +#define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L +#define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L +#define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L +#define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L +#define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L + +#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L +#define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L +#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L +#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L + +/* Byte aligned defintion for BIOS usage */ +#define ATOM_S3_CRT1_ACTIVEb0 0x01 +#define ATOM_S3_LCD1_ACTIVEb0 0x02 +#define ATOM_S3_TV1_ACTIVEb0 0x04 +#define ATOM_S3_DFP1_ACTIVEb0 0x08 +#define ATOM_S3_CRT2_ACTIVEb0 0x10 +#define ATOM_S3_LCD2_ACTIVEb0 0x20 +#define ATOM_S3_TV2_ACTIVEb0 0x40 +#define ATOM_S3_DFP2_ACTIVEb0 0x80 +#define ATOM_S3_CV_ACTIVEb1 0x01 +#define ATOM_S3_DFP3_ACTIVEb1 0x02 +#define ATOM_S3_DFP4_ACTIVEb1 0x04 +#define ATOM_S3_DFP5_ACTIVEb1 0x08 + +#define ATOM_S3_ACTIVE_CRTC1w0 0xFFF + +#define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01 +#define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02 +#define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04 +#define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08 +#define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10 +#define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20 +#define ATOM_S3_TV2_CRTC_ACTIVEb2 0x40 +#define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80 +#define ATOM_S3_CV_CRTC_ACTIVEb3 0x01 +#define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02 +#define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04 +#define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08 + +#define ATOM_S3_ACTIVE_CRTC2w1 0xFFF + +#define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20 +#define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40 +#define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80 + +/* BIOS_4_SCRATCH Definition */ +#define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL +#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L +#define ATOM_S4_LCD1_REFRESH_SHIFT 8 + +/* Byte aligned defintion for BIOS usage */ +#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF +#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 +#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 + +/* BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! */ +#define ATOM_S5_DOS_REQ_CRT1b0 0x01 +#define ATOM_S5_DOS_REQ_LCD1b0 0x02 +#define ATOM_S5_DOS_REQ_TV1b0 0x04 +#define ATOM_S5_DOS_REQ_DFP1b0 0x08 +#define ATOM_S5_DOS_REQ_CRT2b0 0x10 +#define ATOM_S5_DOS_REQ_LCD2b0 0x20 +#define ATOM_S5_DOS_REQ_TV2b0 0x40 +#define ATOM_S5_DOS_REQ_DFP2b0 0x80 +#define ATOM_S5_DOS_REQ_CVb1 0x01 +#define ATOM_S5_DOS_REQ_DFP3b1 0x02 +#define ATOM_S5_DOS_REQ_DFP4b1 0x04 +#define ATOM_S5_DOS_REQ_DFP5b1 0x08 + +#define ATOM_S5_DOS_REQ_DEVICEw0 0x03FF + +#define ATOM_S5_DOS_REQ_CRT1 0x0001 +#define ATOM_S5_DOS_REQ_LCD1 0x0002 +#define ATOM_S5_DOS_REQ_TV1 0x0004 +#define ATOM_S5_DOS_REQ_DFP1 0x0008 +#define ATOM_S5_DOS_REQ_CRT2 0x0010 +#define ATOM_S5_DOS_REQ_LCD2 0x0020 +#define ATOM_S5_DOS_REQ_TV2 0x0040 +#define ATOM_S5_DOS_REQ_DFP2 0x0080 +#define ATOM_S5_DOS_REQ_CV 0x0100 +#define ATOM_S5_DOS_REQ_DFP3 0x0200 +#define ATOM_S5_DOS_REQ_DFP4 0x0400 +#define ATOM_S5_DOS_REQ_DFP5 0x0800 + +#define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0 +#define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0 +#define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0 +#define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1 +#define ATOM_S5_DOS_FORCE_DEVICEw1 \ + (ATOM_S5_DOS_FORCE_CRT1b2 + ATOM_S5_DOS_FORCE_TV1b2 + \ + ATOM_S5_DOS_FORCE_CRT2b2 + (ATOM_S5_DOS_FORCE_CVb3 << 8)) + +/* BIOS_6_SCRATCH Definition */ +#define ATOM_S6_DEVICE_CHANGE 0x00000001L +#define ATOM_S6_SCALER_CHANGE 0x00000002L +#define ATOM_S6_LID_CHANGE 0x00000004L +#define ATOM_S6_DOCKING_CHANGE 0x00000008L +#define ATOM_S6_ACC_MODE 0x00000010L +#define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L +#define ATOM_S6_LID_STATE 0x00000040L +#define ATOM_S6_DOCK_STATE 0x00000080L +#define ATOM_S6_CRITICAL_STATE 0x00000100L +#define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L +#define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L +#define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L +#define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L /* Normal expansion Request bit for LCD */ +#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L /* Aspect ratio expansion Request bit for LCD */ + +#define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L /* This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion */ +#define ATOM_S6_I2C_STATE_CHANGE 0x00008000L /* This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion */ + +#define ATOM_S6_ACC_REQ_CRT1 0x00010000L +#define ATOM_S6_ACC_REQ_LCD1 0x00020000L +#define ATOM_S6_ACC_REQ_TV1 0x00040000L +#define ATOM_S6_ACC_REQ_DFP1 0x00080000L +#define ATOM_S6_ACC_REQ_CRT2 0x00100000L +#define ATOM_S6_ACC_REQ_LCD2 0x00200000L +#define ATOM_S6_ACC_REQ_TV2 0x00400000L +#define ATOM_S6_ACC_REQ_DFP2 0x00800000L +#define ATOM_S6_ACC_REQ_CV 0x01000000L +#define ATOM_S6_ACC_REQ_DFP3 0x02000000L +#define ATOM_S6_ACC_REQ_DFP4 0x04000000L +#define ATOM_S6_ACC_REQ_DFP5 0x08000000L + +#define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L +#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L +#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L +#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L +#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L + +/* Byte aligned defintion for BIOS usage */ +#define ATOM_S6_DEVICE_CHANGEb0 0x01 +#define ATOM_S6_SCALER_CHANGEb0 0x02 +#define ATOM_S6_LID_CHANGEb0 0x04 +#define ATOM_S6_DOCKING_CHANGEb0 0x08 +#define ATOM_S6_ACC_MODEb0 0x10 +#define ATOM_S6_EXT_DESKTOP_MODEb0 0x20 +#define ATOM_S6_LID_STATEb0 0x40 +#define ATOM_S6_DOCK_STATEb0 0x80 +#define ATOM_S6_CRITICAL_STATEb1 0x01 +#define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02 +#define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04 +#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08 +#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10 +#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20 + +#define ATOM_S6_ACC_REQ_CRT1b2 0x01 +#define ATOM_S6_ACC_REQ_LCD1b2 0x02 +#define ATOM_S6_ACC_REQ_TV1b2 0x04 +#define ATOM_S6_ACC_REQ_DFP1b2 0x08 +#define ATOM_S6_ACC_REQ_CRT2b2 0x10 +#define ATOM_S6_ACC_REQ_LCD2b2 0x20 +#define ATOM_S6_ACC_REQ_TV2b2 0x40 +#define ATOM_S6_ACC_REQ_DFP2b2 0x80 +#define ATOM_S6_ACC_REQ_CVb3 0x01 +#define ATOM_S6_ACC_REQ_DFP3b3 0x02 +#define ATOM_S6_ACC_REQ_DFP4b3 0x04 +#define ATOM_S6_ACC_REQ_DFP5b3 0x08 + +#define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0 +#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10 +#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20 +#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40 +#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80 + +#define ATOM_S6_DEVICE_CHANGE_SHIFT 0 +#define ATOM_S6_SCALER_CHANGE_SHIFT 1 +#define ATOM_S6_LID_CHANGE_SHIFT 2 +#define ATOM_S6_DOCKING_CHANGE_SHIFT 3 +#define ATOM_S6_ACC_MODE_SHIFT 4 +#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5 +#define ATOM_S6_LID_STATE_SHIFT 6 +#define ATOM_S6_DOCK_STATE_SHIFT 7 +#define ATOM_S6_CRITICAL_STATE_SHIFT 8 +#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9 +#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10 +#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11 +#define ATOM_S6_REQ_SCALER_SHIFT 12 +#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13 +#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14 +#define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15 +#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28 +#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29 +#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30 +#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31 + +/* BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! */ +#define ATOM_S7_DOS_MODE_TYPEb0 0x03 +#define ATOM_S7_DOS_MODE_VGAb0 0x00 +#define ATOM_S7_DOS_MODE_VESAb0 0x01 +#define ATOM_S7_DOS_MODE_EXTb0 0x02 +#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C +#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0 +#define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01 +#define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF + +#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8 + +/* BIOS_8_SCRATCH Definition */ +#define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF +#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000 + +#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0 +#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16 + +/* BIOS_9_SCRATCH Definition */ +#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK +#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF +#endif +#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK +#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000 +#endif +#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT +#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0 +#endif +#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT +#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16 +#endif + +#define ATOM_FLAG_SET 0x20 +#define ATOM_FLAG_CLEAR 0 +#define CLEAR_ATOM_S6_ACC_MODE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR) +#define SET_ATOM_S6_DEVICE_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_SCALER_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_LID_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET) + +#define SET_ATOM_S6_LID_STATE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) |\ + ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_LID_STATE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR) + +#define SET_ATOM_S6_DOCK_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8)| \ + ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_DOCK_STATE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_DOCK_STATE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR) + +#define SET_ATOM_S6_THERMAL_STATE_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET) + +#define SET_ATOM_S6_CRITICAL_STATE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_CRITICAL_STATE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR) + +#define SET_ATOM_S6_REQ_SCALER \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_REQ_SCALER \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR ) + +#define SET_ATOM_S6_REQ_SCALER_ARATIO \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET ) +#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR ) + +#define SET_ATOM_S6_I2C_STATE_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET ) + +#define SET_ATOM_S6_DISPLAY_STATE_CHANGE \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET ) + +#define SET_ATOM_S6_DEVICE_RECONFIG \ + ((ATOM_ACC_CHANGE_INFO_DEF << 8) | \ + ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S0_LCD1 \ + ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 ) | \ + ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR ) +#define SET_ATOM_S7_DOS_8BIT_DAC_EN \ + ((ATOM_DOS_MODE_INFO_DEF << 8) | \ + ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET ) +#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN \ + ((ATOM_DOS_MODE_INFO_DEF << 8) | \ + ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR ) + +/****************************************************************************/ +/* Portion II: Definitinos only used in Driver */ +/****************************************************************************/ + +/* Macros used by driver */ + +#define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char *)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES *)0)->FieldName)-(char *)0)/sizeof(USHORT)) + +#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F) +#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F) + +#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION +#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION + +/****************************************************************************/ +/* Portion III: Definitinos only used in VBIOS */ +/****************************************************************************/ +#define ATOM_DAC_SRC 0x80 +#define ATOM_SRC_DAC1 0 +#define ATOM_SRC_DAC2 0x80 + +#ifdef UEFI_BUILD +#define USHORT UTEMP +#endif + +typedef struct _MEMORY_PLLINIT_PARAMETERS { + ULONG ulTargetMemoryClock; /* In 10Khz unit */ + UCHAR ucAction; /* not define yet */ + UCHAR ucFbDiv_Hi; /* Fbdiv Hi byte */ + UCHAR ucFbDiv; /* FB value */ + UCHAR ucPostDiv; /* Post div */ +} MEMORY_PLLINIT_PARAMETERS; + +#define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS + +#define GPIO_PIN_WRITE 0x01 +#define GPIO_PIN_READ 0x00 + +typedef struct _GPIO_PIN_CONTROL_PARAMETERS { + UCHAR ucGPIO_ID; /* return value, read from GPIO pins */ + UCHAR ucGPIOBitShift; /* define which bit in uGPIOBitVal need to be update */ + UCHAR ucGPIOBitVal; /* Set/Reset corresponding bit defined in ucGPIOBitMask */ + UCHAR ucAction; /* =GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write */ +} GPIO_PIN_CONTROL_PARAMETERS; + +typedef struct _ENABLE_SCALER_PARAMETERS { + UCHAR ucScaler; /* ATOM_SCALER1, ATOM_SCALER2 */ + UCHAR ucEnable; /* ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION */ + UCHAR ucTVStandard; /* */ + UCHAR ucPadding[1]; +} ENABLE_SCALER_PARAMETERS; +#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS + +/* ucEnable: */ +#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0 +#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1 +#define SCALER_ENABLE_2TAP_ALPHA_MODE 2 +#define SCALER_ENABLE_MULTITAP_MODE 3 + +typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS { + ULONG usHWIconHorzVertPosn; /* Hardware Icon Vertical position */ + UCHAR ucHWIconVertOffset; /* Hardware Icon Vertical offset */ + UCHAR ucHWIconHorzOffset; /* Hardware Icon Horizontal offset */ + UCHAR ucSelection; /* ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 */ + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ +} ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS; + +typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION { + ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon; + ENABLE_CRTC_PARAMETERS sReserved; +} ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION; + +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS { + USHORT usHight; /* Image Hight */ + USHORT usWidth; /* Image Width */ + UCHAR ucSurface; /* Surface 1 or 2 */ + UCHAR ucPadding[3]; +} ENABLE_GRAPH_SURFACE_PARAMETERS; + +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 { + USHORT usHight; /* Image Hight */ + USHORT usWidth; /* Image Width */ + UCHAR ucSurface; /* Surface 1 or 2 */ + UCHAR ucEnable; /* ATOM_ENABLE or ATOM_DISABLE */ + UCHAR ucPadding[2]; +} ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2; + +typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION { + ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface; + ENABLE_YUV_PS_ALLOCATION sReserved; /* Don't set this one */ +} ENABLE_GRAPH_SURFACE_PS_ALLOCATION; + +typedef struct _MEMORY_CLEAN_UP_PARAMETERS { + USHORT usMemoryStart; /* in 8Kb boundry, offset from memory base address */ + USHORT usMemorySize; /* 8Kb blocks aligned */ +} MEMORY_CLEAN_UP_PARAMETERS; +#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS + +typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS { + USHORT usX_Size; /* When use as input parameter, usX_Size indicates which CRTC */ + USHORT usY_Size; +} GET_DISPLAY_SURFACE_SIZE_PARAMETERS; + +typedef struct _INDIRECT_IO_ACCESS { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR IOAccessSequence[256]; +} INDIRECT_IO_ACCESS; + +#define INDIRECT_READ 0x00 +#define INDIRECT_WRITE 0x80 + +#define INDIRECT_IO_MM 0 +#define INDIRECT_IO_PLL 1 +#define INDIRECT_IO_MC 2 +#define INDIRECT_IO_PCIE 3 +#define INDIRECT_IO_PCIEP 4 +#define INDIRECT_IO_NBMISC 5 + +#define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ +#define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE +#define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ +#define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE +#define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ +#define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE +#define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ +#define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE +#define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ +#define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE + +typedef struct _ATOM_OEM_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; +} ATOM_OEM_INFO; + +typedef struct _ATOM_TV_MODE { + UCHAR ucVMode_Num; /* Video mode number */ + UCHAR ucTV_Mode_Num; /* Internal TV mode number */ +} ATOM_TV_MODE; + +typedef struct _ATOM_BIOS_INT_TVSTD_MODE { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usTV_Mode_LUT_Offset; /* Pointer to standard to internal number conversion table */ + USHORT usTV_FIFO_Offset; /* Pointer to FIFO entry table */ + USHORT usNTSC_Tbl_Offset; /* Pointer to SDTV_Mode_NTSC table */ + USHORT usPAL_Tbl_Offset; /* Pointer to SDTV_Mode_PAL table */ + USHORT usCV_Tbl_Offset; /* Pointer to SDTV_Mode_PAL table */ +} ATOM_BIOS_INT_TVSTD_MODE; + +typedef struct _ATOM_TV_MODE_SCALER_PTR { + USHORT ucFilter0_Offset; /* Pointer to filter format 0 coefficients */ + USHORT usFilter1_Offset; /* Pointer to filter format 0 coefficients */ + UCHAR ucTV_Mode_Num; +} ATOM_TV_MODE_SCALER_PTR; + +typedef struct _ATOM_STANDARD_VESA_TIMING { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT aModeTimings[16]; /* 16 is not the real array number, just for initial allocation */ +} ATOM_STANDARD_VESA_TIMING; + +typedef struct _ATOM_STD_FORMAT { + USHORT usSTD_HDisp; + USHORT usSTD_VDisp; + USHORT usSTD_RefreshRate; + USHORT usReserved; +} ATOM_STD_FORMAT; + +typedef struct _ATOM_VESA_TO_EXTENDED_MODE { + USHORT usVESA_ModeNumber; + USHORT usExtendedModeNumber; +} ATOM_VESA_TO_EXTENDED_MODE; + +typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT { + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76]; +} ATOM_VESA_TO_INTENAL_MODE_LUT; + +/*************** ATOM Memory Related Data Structure ***********************/ +typedef struct _ATOM_MEMORY_VENDOR_BLOCK { + UCHAR ucMemoryType; + UCHAR ucMemoryVendor; + UCHAR ucAdjMCId; + UCHAR ucDynClkId; + ULONG ulDllResetClkRange; +} ATOM_MEMORY_VENDOR_BLOCK; + +typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG { +#if ATOM_BIG_ENDIAN + ULONG ucMemBlkId:8; + ULONG ulMemClockRange:24; +#else + ULONG ulMemClockRange:24; + ULONG ucMemBlkId:8; +#endif +} ATOM_MEMORY_SETTING_ID_CONFIG; + +typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS { + ATOM_MEMORY_SETTING_ID_CONFIG slAccess; + ULONG ulAccess; +} ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS; + +typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK { + ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID; + ULONG aulMemData[1]; +} ATOM_MEMORY_SETTING_DATA_BLOCK; + +typedef struct _ATOM_INIT_REG_INDEX_FORMAT { + USHORT usRegIndex; /* MC register index */ + UCHAR ucPreRegDataLength; /* offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf */ +} ATOM_INIT_REG_INDEX_FORMAT; + +typedef struct _ATOM_INIT_REG_BLOCK { + USHORT usRegIndexTblSize; /* size of asRegIndexBuf */ + USHORT usRegDataBlkSize; /* size of ATOM_MEMORY_SETTING_DATA_BLOCK */ + ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1]; + ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1]; +} ATOM_INIT_REG_BLOCK; + +#define END_OF_REG_INDEX_BLOCK 0x0ffff +#define END_OF_REG_DATA_BLOCK 0x00000000 +#define ATOM_INIT_REG_MASK_FLAG 0x80 +#define CLOCK_RANGE_HIGHEST 0x00ffffff + +#define VALUE_DWORD SIZEOF ULONG +#define VALUE_SAME_AS_ABOVE 0 +#define VALUE_MASK_DWORD 0x84 + +#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1) +#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1) +#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1) + +typedef struct _ATOM_MC_INIT_PARAM_TABLE { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usAdjustARB_SEQDataOffset; + USHORT usMCInitMemTypeTblOffset; + USHORT usMCInitCommonTblOffset; + USHORT usMCInitPowerDownTblOffset; + ULONG ulARB_SEQDataBuf[32]; + ATOM_INIT_REG_BLOCK asMCInitMemType; + ATOM_INIT_REG_BLOCK asMCInitCommon; +} ATOM_MC_INIT_PARAM_TABLE; + +#define _4Mx16 0x2 +#define _4Mx32 0x3 +#define _8Mx16 0x12 +#define _8Mx32 0x13 +#define _16Mx16 0x22 +#define _16Mx32 0x23 +#define _32Mx16 0x32 +#define _32Mx32 0x33 +#define _64Mx8 0x41 +#define _64Mx16 0x42 + +#define SAMSUNG 0x1 +#define INFINEON 0x2 +#define ELPIDA 0x3 +#define ETRON 0x4 +#define NANYA 0x5 +#define HYNIX 0x6 +#define MOSEL 0x7 +#define WINBOND 0x8 +#define ESMT 0x9 +#define MICRON 0xF + +#define QIMONDA INFINEON +#define PROMOS MOSEL + +/* ///////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// */ + +#define UCODE_ROM_START_ADDRESS 0x1c000 +#define UCODE_SIGNATURE 0x4375434d /* 'MCuC' - MC uCode */ + +/* uCode block header for reference */ + +typedef struct _MCuCodeHeader { + ULONG ulSignature; + UCHAR ucRevision; + UCHAR ucChecksum; + UCHAR ucReserved1; + UCHAR ucReserved2; + USHORT usParametersLength; + USHORT usUCodeLength; + USHORT usReserved1; + USHORT usReserved2; +} MCuCodeHeader; + +/* //////////////////////////////////////////////////////////////////////////////// */ + +#define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16 + +#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF +typedef struct _ATOM_VRAM_MODULE_V1 { + ULONG ulReserved; + USHORT usEMRSValue; + USHORT usMRSValue; + USHORT usReserved; + UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */ + UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; */ + UCHAR ucMemoryVenderID; /* Predefined,never change across designs or memory type/vender */ + UCHAR ucMemoryDeviceCfg; /* [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */ + UCHAR ucRow; /* Number of Row,in power of 2; */ + UCHAR ucColumn; /* Number of Column,in power of 2; */ + UCHAR ucBank; /* Nunber of Bank; */ + UCHAR ucRank; /* Number of Rank, in power of 2 */ + UCHAR ucChannelNum; /* Number of channel; */ + UCHAR ucChannelConfig; /* [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */ + UCHAR ucDefaultMVDDQ_ID; /* Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */ + UCHAR ucDefaultMVDDC_ID; /* Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */ + UCHAR ucReserved[2]; +} ATOM_VRAM_MODULE_V1; + +typedef struct _ATOM_VRAM_MODULE_V2 { + ULONG ulReserved; + ULONG ulFlags; /* To enable/disable functionalities based on memory type */ + ULONG ulEngineClock; /* Override of default engine clock for particular memory type */ + ULONG ulMemoryClock; /* Override of default memory clock for particular memory type */ + USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usEMRSValue; + USHORT usMRSValue; + USHORT usReserved; + UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */ + UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */ + UCHAR ucMemoryVenderID; /* Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */ + UCHAR ucMemoryDeviceCfg; /* [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */ + UCHAR ucRow; /* Number of Row,in power of 2; */ + UCHAR ucColumn; /* Number of Column,in power of 2; */ + UCHAR ucBank; /* Nunber of Bank; */ + UCHAR ucRank; /* Number of Rank, in power of 2 */ + UCHAR ucChannelNum; /* Number of channel; */ + UCHAR ucChannelConfig; /* [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */ + UCHAR ucDefaultMVDDQ_ID; /* Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */ + UCHAR ucDefaultMVDDC_ID; /* Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */ + UCHAR ucRefreshRateFactor; + UCHAR ucReserved[3]; +} ATOM_VRAM_MODULE_V2; + +typedef struct _ATOM_MEMORY_TIMING_FORMAT { + ULONG ulClkRange; /* memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */ + union { + USHORT usMRS; /* mode register */ + USHORT usDDR3_MR0; + }; + union { + USHORT usEMRS; /* extended mode register */ + USHORT usDDR3_MR1; + }; + UCHAR ucCL; /* CAS latency */ + UCHAR ucWL; /* WRITE Latency */ + UCHAR uctRAS; /* tRAS */ + UCHAR uctRC; /* tRC */ + UCHAR uctRFC; /* tRFC */ + UCHAR uctRCDR; /* tRCDR */ + UCHAR uctRCDW; /* tRCDW */ + UCHAR uctRP; /* tRP */ + UCHAR uctRRD; /* tRRD */ + UCHAR uctWR; /* tWR */ + UCHAR uctWTR; /* tWTR */ + UCHAR uctPDIX; /* tPDIX */ + UCHAR uctFAW; /* tFAW */ + UCHAR uctAOND; /* tAOND */ + union { + struct { + UCHAR ucflag; /* flag to control memory timing calculation. bit0= control EMRS2 Infineon */ + UCHAR ucReserved; + }; + USHORT usDDR3_MR2; + }; +} ATOM_MEMORY_TIMING_FORMAT; + +typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 { + ULONG ulClkRange; /* memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */ + USHORT usMRS; /* mode register */ + USHORT usEMRS; /* extended mode register */ + UCHAR ucCL; /* CAS latency */ + UCHAR ucWL; /* WRITE Latency */ + UCHAR uctRAS; /* tRAS */ + UCHAR uctRC; /* tRC */ + UCHAR uctRFC; /* tRFC */ + UCHAR uctRCDR; /* tRCDR */ + UCHAR uctRCDW; /* tRCDW */ + UCHAR uctRP; /* tRP */ + UCHAR uctRRD; /* tRRD */ + UCHAR uctWR; /* tWR */ + UCHAR uctWTR; /* tWTR */ + UCHAR uctPDIX; /* tPDIX */ + UCHAR uctFAW; /* tFAW */ + UCHAR uctAOND; /* tAOND */ + UCHAR ucflag; /* flag to control memory timing calculation. bit0= control EMRS2 Infineon */ +/* ///////////////////////GDDR parameters/////////////////////////////////// */ + UCHAR uctCCDL; /* */ + UCHAR uctCRCRL; /* */ + UCHAR uctCRCWL; /* */ + UCHAR uctCKE; /* */ + UCHAR uctCKRSE; /* */ + UCHAR uctCKRSX; /* */ + UCHAR uctFAW32; /* */ + UCHAR ucReserved1; /* */ + UCHAR ucReserved2; /* */ + UCHAR ucTerminator; +} ATOM_MEMORY_TIMING_FORMAT_V1; + +typedef struct _ATOM_MEMORY_FORMAT { + ULONG ulDllDisClock; /* memory DLL will be disable when target memory clock is below this clock */ + union { + USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usDDR3_Reserved; /* Not used for DDR3 memory */ + }; + union { + USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usDDR3_MR3; /* Used for DDR3 memory */ + }; + UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */ + UCHAR ucMemoryVenderID; /* Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */ + UCHAR ucRow; /* Number of Row,in power of 2; */ + UCHAR ucColumn; /* Number of Column,in power of 2; */ + UCHAR ucBank; /* Nunber of Bank; */ + UCHAR ucRank; /* Number of Rank, in power of 2 */ + UCHAR ucBurstSize; /* burst size, 0= burst size=4 1= burst size=8 */ + UCHAR ucDllDisBit; /* position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) */ + UCHAR ucRefreshRateFactor; /* memory refresh rate in unit of ms */ + UCHAR ucDensity; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */ + UCHAR ucPreamble; /* [7:4] Write Preamble, [3:0] Read Preamble */ + UCHAR ucMemAttrib; /* Memory Device Addribute, like RDBI/WDBI etc */ + ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; /* Memory Timing block sort from lower clock to higher clock */ +} ATOM_MEMORY_FORMAT; + +typedef struct _ATOM_VRAM_MODULE_V3 { + ULONG ulChannelMapCfg; /* board dependent paramenter:Channel combination */ + USHORT usSize; /* size of ATOM_VRAM_MODULE_V3 */ + USHORT usDefaultMVDDQ; /* board dependent parameter:Default Memory Core Voltage */ + USHORT usDefaultMVDDC; /* board dependent parameter:Default Memory IO Voltage */ + UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */ + UCHAR ucChannelNum; /* board dependent parameter:Number of channel; */ + UCHAR ucChannelSize; /* board dependent parameter:32bit or 64bit */ + UCHAR ucVREFI; /* board dependnt parameter: EXT or INT +160mv to -140mv */ + UCHAR ucNPL_RT; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */ + UCHAR ucFlag; /* To enable/disable functionalities based on memory type */ + ATOM_MEMORY_FORMAT asMemory; /* describ all of video memory parameters from memory spec */ +} ATOM_VRAM_MODULE_V3; + +/* ATOM_VRAM_MODULE_V3.ucNPL_RT */ +#define NPL_RT_MASK 0x0f +#define BATTERY_ODT_MASK 0xc0 + +#define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3 + +typedef struct _ATOM_VRAM_MODULE_V4 { + ULONG ulChannelMapCfg; /* board dependent parameter: Channel combination */ + USHORT usModuleSize; /* size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */ + USHORT usPrivateReserved; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */ + /* MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */ + USHORT usReserved; + UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */ + UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */ + UCHAR ucChannelNum; /* Number of channels present in this module config */ + UCHAR ucChannelWidth; /* 0 - 32 bits; 1 - 64 bits */ + UCHAR ucDensity; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */ + UCHAR ucFlag; /* To enable/disable functionalities based on memory type */ + UCHAR ucMisc; /* bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 */ + UCHAR ucVREFI; /* board dependent parameter */ + UCHAR ucNPL_RT; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */ + UCHAR ucPreamble; /* [7:4] Write Preamble, [3:0] Read Preamble */ + UCHAR ucMemorySize; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */ + /* Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */ + UCHAR ucReserved[3]; + +/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */ + union { + USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usDDR3_Reserved; + }; + union { + USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usDDR3_MR3; /* Used for DDR3 memory */ + }; + UCHAR ucMemoryVenderID; /* Predefined, If not predefined, vendor detection table gets executed */ + UCHAR ucRefreshRateFactor; /* [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */ + UCHAR ucReserved2[2]; + ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; /* Memory Timing block sort from lower clock to higher clock */ +} ATOM_VRAM_MODULE_V4; + +#define VRAM_MODULE_V4_MISC_RANK_MASK 0x3 +#define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1 +#define VRAM_MODULE_V4_MISC_BL_MASK 0x4 +#define VRAM_MODULE_V4_MISC_BL8 0x4 +#define VRAM_MODULE_V4_MISC_DUAL_CS 0x10 + +typedef struct _ATOM_VRAM_MODULE_V5 { + ULONG ulChannelMapCfg; /* board dependent parameter: Channel combination */ + USHORT usModuleSize; /* size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */ + USHORT usPrivateReserved; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */ + /* MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */ + USHORT usReserved; + UCHAR ucExtMemoryID; /* An external indicator (by hardcode, callback or pin) to tell what is the current memory module */ + UCHAR ucMemoryType; /* [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */ + UCHAR ucChannelNum; /* Number of channels present in this module config */ + UCHAR ucChannelWidth; /* 0 - 32 bits; 1 - 64 bits */ + UCHAR ucDensity; /* _8Mx32, _16Mx32, _16Mx16, _32Mx16 */ + UCHAR ucFlag; /* To enable/disable functionalities based on memory type */ + UCHAR ucMisc; /* bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 */ + UCHAR ucVREFI; /* board dependent parameter */ + UCHAR ucNPL_RT; /* board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */ + UCHAR ucPreamble; /* [7:4] Write Preamble, [3:0] Read Preamble */ + UCHAR ucMemorySize; /* BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */ + /* Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */ + UCHAR ucReserved[3]; + +/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */ + USHORT usEMRS2Value; /* EMRS2 Value is used for GDDR2 and GDDR4 memory type */ + USHORT usEMRS3Value; /* EMRS3 Value is used for GDDR2 and GDDR4 memory type */ + UCHAR ucMemoryVenderID; /* Predefined, If not predefined, vendor detection table gets executed */ + UCHAR ucRefreshRateFactor; /* [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */ + UCHAR ucFIFODepth; /* FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth */ + UCHAR ucCDR_Bandwidth; /* [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth */ + ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5]; /* Memory Timing block sort from lower clock to higher clock */ +} ATOM_VRAM_MODULE_V5; + +typedef struct _ATOM_VRAM_INFO_V2 { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */ +} ATOM_VRAM_INFO_V2; + +typedef struct _ATOM_VRAM_INFO_V3 { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */ + USHORT usMemClkPatchTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */ + USHORT usRerseved; + UCHAR aVID_PinsShift[9]; /* 8 bit strap maximum+terminator */ + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */ + ATOM_INIT_REG_BLOCK asMemPatch; /* for allocation */ + /* ATOM_INIT_REG_BLOCK aMemAdjust; */ +} ATOM_VRAM_INFO_V3; + +#define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3 + +typedef struct _ATOM_VRAM_INFO_V4 { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */ + USHORT usMemClkPatchTblOffset; /* offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */ + USHORT usRerseved; + UCHAR ucMemDQ7_0ByteRemap; /* DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 */ + ULONG ulMemDQ7_0BitRemap; /* each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] */ + UCHAR ucReservde[4]; + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; /* just for allocation, real number of blocks is in ucNumOfVRAMModule; */ + ATOM_INIT_REG_BLOCK asMemPatch; /* for allocation */ + /* ATOM_INIT_REG_BLOCK aMemAdjust; */ +} ATOM_VRAM_INFO_V4; + +typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR aVID_PinsShift[9]; /* 8 bit strap maximum+terminator */ +} ATOM_VRAM_GPIO_DETECTION_INFO; + +typedef struct _ATOM_MEMORY_TRAINING_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucTrainingLoop; + UCHAR ucReserved[3]; + ATOM_INIT_REG_BLOCK asMemTrainingSetting; +} ATOM_MEMORY_TRAINING_INFO; + +typedef struct SW_I2C_CNTL_DATA_PARAMETERS { + UCHAR ucControl; + UCHAR ucData; + UCHAR ucSatus; + UCHAR ucTemp; +} SW_I2C_CNTL_DATA_PARAMETERS; + +#define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS + +typedef struct _SW_I2C_IO_DATA_PARAMETERS { + USHORT GPIO_Info; + UCHAR ucAct; + UCHAR ucData; +} SW_I2C_IO_DATA_PARAMETERS; + +#define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS + +/****************************SW I2C CNTL DEFINITIONS**********************/ +#define SW_I2C_IO_RESET 0 +#define SW_I2C_IO_GET 1 +#define SW_I2C_IO_DRIVE 2 +#define SW_I2C_IO_SET 3 +#define SW_I2C_IO_START 4 + +#define SW_I2C_IO_CLOCK 0 +#define SW_I2C_IO_DATA 0x80 + +#define SW_I2C_IO_ZERO 0 +#define SW_I2C_IO_ONE 0x100 + +#define SW_I2C_CNTL_READ 0 +#define SW_I2C_CNTL_WRITE 1 +#define SW_I2C_CNTL_START 2 +#define SW_I2C_CNTL_STOP 3 +#define SW_I2C_CNTL_OPEN 4 +#define SW_I2C_CNTL_CLOSE 5 +#define SW_I2C_CNTL_WRITE1BIT 6 + +/* ==============================VESA definition Portion=============================== */ +#define VESA_OEM_PRODUCT_REV '01.00' +#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB /* refer to VBE spec p.32, no TTY support */ +#define VESA_MODE_WIN_ATTRIBUTE 7 +#define VESA_WIN_SIZE 64 + +typedef struct _PTR_32_BIT_STRUCTURE { + USHORT Offset16; + USHORT Segment16; +} PTR_32_BIT_STRUCTURE; + +typedef union _PTR_32_BIT_UNION { + PTR_32_BIT_STRUCTURE SegmentOffset; + ULONG Ptr32_Bit; +} PTR_32_BIT_UNION; + +typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE { + UCHAR VbeSignature[4]; + USHORT VbeVersion; + PTR_32_BIT_UNION OemStringPtr; + UCHAR Capabilities[4]; + PTR_32_BIT_UNION VideoModePtr; + USHORT TotalMemory; +} VBE_1_2_INFO_BLOCK_UPDATABLE; + +typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE { + VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock; + USHORT OemSoftRev; + PTR_32_BIT_UNION OemVendorNamePtr; + PTR_32_BIT_UNION OemProductNamePtr; + PTR_32_BIT_UNION OemProductRevPtr; +} VBE_2_0_INFO_BLOCK_UPDATABLE; + +typedef union _VBE_VERSION_UNION { + VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock; + VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock; +} VBE_VERSION_UNION; + +typedef struct _VBE_INFO_BLOCK { + VBE_VERSION_UNION UpdatableVBE_Info; + UCHAR Reserved[222]; + UCHAR OemData[256]; +} VBE_INFO_BLOCK; + +typedef struct _VBE_FP_INFO { + USHORT HSize; + USHORT VSize; + USHORT FPType; + UCHAR RedBPP; + UCHAR GreenBPP; + UCHAR BlueBPP; + UCHAR ReservedBPP; + ULONG RsvdOffScrnMemSize; + ULONG RsvdOffScrnMEmPtr; + UCHAR Reserved[14]; +} VBE_FP_INFO; + +typedef struct _VESA_MODE_INFO_BLOCK { +/* Mandatory information for all VBE revisions */ + USHORT ModeAttributes; /* dw ? ; mode attributes */ + UCHAR WinAAttributes; /* db ? ; window A attributes */ + UCHAR WinBAttributes; /* db ? ; window B attributes */ + USHORT WinGranularity; /* dw ? ; window granularity */ + USHORT WinSize; /* dw ? ; window size */ + USHORT WinASegment; /* dw ? ; window A start segment */ + USHORT WinBSegment; /* dw ? ; window B start segment */ + ULONG WinFuncPtr; /* dd ? ; real mode pointer to window function */ + USHORT BytesPerScanLine; /* dw ? ; bytes per scan line */ + +/* ; Mandatory information for VBE 1.2 and above */ + USHORT XResolution; /* dw ? ; horizontal resolution in pixels or characters */ + USHORT YResolution; /* dw ? ; vertical resolution in pixels or characters */ + UCHAR XCharSize; /* db ? ; character cell width in pixels */ + UCHAR YCharSize; /* db ? ; character cell height in pixels */ + UCHAR NumberOfPlanes; /* db ? ; number of memory planes */ + UCHAR BitsPerPixel; /* db ? ; bits per pixel */ + UCHAR NumberOfBanks; /* db ? ; number of banks */ + UCHAR MemoryModel; /* db ? ; memory model type */ + UCHAR BankSize; /* db ? ; bank size in KB */ + UCHAR NumberOfImagePages; /* db ? ; number of images */ + UCHAR ReservedForPageFunction; /* db 1 ; reserved for page function */ + +/* ; Direct Color fields(required for direct/6 and YUV/7 memory models) */ + UCHAR RedMaskSize; /* db ? ; size of direct color red mask in bits */ + UCHAR RedFieldPosition; /* db ? ; bit position of lsb of red mask */ + UCHAR GreenMaskSize; /* db ? ; size of direct color green mask in bits */ + UCHAR GreenFieldPosition; /* db ? ; bit position of lsb of green mask */ + UCHAR BlueMaskSize; /* db ? ; size of direct color blue mask in bits */ + UCHAR BlueFieldPosition; /* db ? ; bit position of lsb of blue mask */ + UCHAR RsvdMaskSize; /* db ? ; size of direct color reserved mask in bits */ + UCHAR RsvdFieldPosition; /* db ? ; bit position of lsb of reserved mask */ + UCHAR DirectColorModeInfo; /* db ? ; direct color mode attributes */ + +/* ; Mandatory information for VBE 2.0 and above */ + ULONG PhysBasePtr; /* dd ? ; physical address for flat memory frame buffer */ + ULONG Reserved_1; /* dd 0 ; reserved - always set to 0 */ + USHORT Reserved_2; /* dw 0 ; reserved - always set to 0 */ + +/* ; Mandatory information for VBE 3.0 and above */ + USHORT LinBytesPerScanLine; /* dw ? ; bytes per scan line for linear modes */ + UCHAR BnkNumberOfImagePages; /* db ? ; number of images for banked modes */ + UCHAR LinNumberOfImagPages; /* db ? ; number of images for linear modes */ + UCHAR LinRedMaskSize; /* db ? ; size of direct color red mask(linear modes) */ + UCHAR LinRedFieldPosition; /* db ? ; bit position of lsb of red mask(linear modes) */ + UCHAR LinGreenMaskSize; /* db ? ; size of direct color green mask(linear modes) */ + UCHAR LinGreenFieldPosition; /* db ? ; bit position of lsb of green mask(linear modes) */ + UCHAR LinBlueMaskSize; /* db ? ; size of direct color blue mask(linear modes) */ + UCHAR LinBlueFieldPosition; /* db ? ; bit position of lsb of blue mask(linear modes) */ + UCHAR LinRsvdMaskSize; /* db ? ; size of direct color reserved mask(linear modes) */ + UCHAR LinRsvdFieldPosition; /* db ? ; bit position of lsb of reserved mask(linear modes) */ + ULONG MaxPixelClock; /* dd ? ; maximum pixel clock(in Hz) for graphics mode */ + UCHAR Reserved; /* db 190 dup (0) */ +} VESA_MODE_INFO_BLOCK; + +/* BIOS function CALLS */ +#define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 /* ATI Extended Function code */ +#define ATOM_BIOS_FUNCTION_COP_MODE 0x00 +#define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04 +#define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05 +#define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06 +#define ATOM_BIOS_FUNCTION_GET_DDC 0x0B +#define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E +#define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F +#define ATOM_BIOS_FUNCTION_STV_STD 0x16 +#define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17 +#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18 + +#define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82 +#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83 +#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84 +#define ATOM_BIOS_FUNCTION_HW_ICON 0x8A +#define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B +#define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 /* Sub function 80 */ +#define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 /* Sub function 80 */ + +#define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D +#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E +#define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F +#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 /* Sub function 03 */ +#define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 /* Sub function 7 */ +#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 /* Notify caller the current thermal state */ +#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 /* Notify caller the current critical state */ +#define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 /* Sub function 85 */ +#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900 /* Sub function 89 */ +#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 /* Notify caller that ADC is supported */ + +#define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 /* Set DPMS */ +#define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 /* BL: Sub function 01 */ +#define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 /* BL: Sub function 02 */ +#define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 /* BH Parameter for DPMS ON. */ +#define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 /* BH Parameter for DPMS STANDBY */ +#define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 /* BH Parameter for DPMS SUSPEND */ +#define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 /* BH Parameter for DPMS OFF */ +#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 /* BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) */ + +#define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L +#define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L +#define ATOM_BIOS_REG_LOW_MASK 0x000000FFL + +/* structure used for VBIOS only */ + +/* DispOutInfoTable */ +typedef struct _ASIC_TRANSMITTER_INFO { + USHORT usTransmitterObjId; + USHORT usSupportDevice; + UCHAR ucTransmitterCmdTblId; + UCHAR ucConfig; + UCHAR ucEncoderID; /* available 1st encoder ( default ) */ + UCHAR ucOptionEncoderID; /* available 2nd encoder ( optional ) */ + UCHAR uc2ndEncoderID; + UCHAR ucReserved; +} ASIC_TRANSMITTER_INFO; + +typedef struct _ASIC_ENCODER_INFO { + UCHAR ucEncoderID; + UCHAR ucEncoderConfig; + USHORT usEncoderCmdTblId; +} ASIC_ENCODER_INFO; + +typedef struct _ATOM_DISP_OUT_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT ptrTransmitterInfo; + USHORT ptrEncoderInfo; + ASIC_TRANSMITTER_INFO asTransmitterInfo[1]; + ASIC_ENCODER_INFO asEncoderInfo[1]; +} ATOM_DISP_OUT_INFO; + +/* DispDevicePriorityInfo */ +typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT asDevicePriority[16]; +} ATOM_DISPLAY_DEVICE_PRIORITY_INFO; + +/* ProcessAuxChannelTransactionTable */ +typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS { + USHORT lpAuxRequest; + USHORT lpDataOut; + UCHAR ucChannelID; + union { + UCHAR ucReplyStatus; + UCHAR ucDelay; + }; + UCHAR ucDataOutLen; + UCHAR ucReserved; +} PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS; + +#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS + +/* GetSinkType */ + +typedef struct _DP_ENCODER_SERVICE_PARAMETERS { + USHORT ucLinkClock; + union { + UCHAR ucConfig; /* for DP training command */ + UCHAR ucI2cId; /* use for GET_SINK_TYPE command */ + }; + UCHAR ucAction; + UCHAR ucStatus; + UCHAR ucLaneNum; + UCHAR ucReserved[2]; +} DP_ENCODER_SERVICE_PARAMETERS; + +/* ucAction */ +#define ATOM_DP_ACTION_GET_SINK_TYPE 0x01 +#define ATOM_DP_ACTION_TRAINING_START 0x02 +#define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03 +#define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04 +#define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05 +#define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06 +#define ATOM_DP_ACTION_BLANKING 0x07 + +/* ucConfig */ +#define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03 +#define ATOM_DP_CONFIG_DIG1_ENCODER 0x00 +#define ATOM_DP_CONFIG_DIG2_ENCODER 0x01 +#define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02 +#define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04 +#define ATOM_DP_CONFIG_LINK_A 0x00 +#define ATOM_DP_CONFIG_LINK_B 0x04 + +#define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + +/* DP_TRAINING_TABLE */ +#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR +#define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 ) +#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16) +#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24) +#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32) +#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40) +#define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48) +#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60) +#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64) +#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72) +#define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76) +#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80) + +typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS { + UCHAR ucI2CSpeed; + union { + UCHAR ucRegIndex; + UCHAR ucStatus; + }; + USHORT lpI2CDataOut; + UCHAR ucFlag; + UCHAR ucTransBytes; + UCHAR ucSlaveAddr; + UCHAR ucLineNumber; +} PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS; + +#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS + +/* ucFlag */ +#define HW_I2C_WRITE 1 +#define HW_I2C_READ 0 + +/****************************************************************************/ +/* Portion VI: Definitinos being oboselete */ +/****************************************************************************/ + +/* ========================================================================================== */ +/* Remove the definitions below when driver is ready! */ +typedef struct _ATOM_DAC_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMaxFrequency; /* in 10kHz unit */ + USHORT usReserved; +} ATOM_DAC_INFO; + +typedef struct _COMPASSIONATE_DATA { + ATOM_COMMON_TABLE_HEADER sHeader; + + /* ============================== DAC1 portion */ + UCHAR ucDAC1_BG_Adjustment; + UCHAR ucDAC1_DAC_Adjustment; + USHORT usDAC1_FORCE_Data; + /* ============================== DAC2 portion */ + UCHAR ucDAC2_CRT2_BG_Adjustment; + UCHAR ucDAC2_CRT2_DAC_Adjustment; + USHORT usDAC2_CRT2_FORCE_Data; + USHORT usDAC2_CRT2_MUX_RegisterIndex; + UCHAR ucDAC2_CRT2_MUX_RegisterInfo; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */ + UCHAR ucDAC2_NTSC_BG_Adjustment; + UCHAR ucDAC2_NTSC_DAC_Adjustment; + USHORT usDAC2_TV1_FORCE_Data; + USHORT usDAC2_TV1_MUX_RegisterIndex; + UCHAR ucDAC2_TV1_MUX_RegisterInfo; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */ + UCHAR ucDAC2_CV_BG_Adjustment; + UCHAR ucDAC2_CV_DAC_Adjustment; + USHORT usDAC2_CV_FORCE_Data; + USHORT usDAC2_CV_MUX_RegisterIndex; + UCHAR ucDAC2_CV_MUX_RegisterInfo; /* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */ + UCHAR ucDAC2_PAL_BG_Adjustment; + UCHAR ucDAC2_PAL_DAC_Adjustment; + USHORT usDAC2_TV2_FORCE_Data; +} COMPASSIONATE_DATA; + +/****************************Supported Device Info Table Definitions**********************/ +/* ucConnectInfo: */ +/* [7:4] - connector type */ +/* = 1 - VGA connector */ +/* = 2 - DVI-I */ +/* = 3 - DVI-D */ +/* = 4 - DVI-A */ +/* = 5 - SVIDEO */ +/* = 6 - COMPOSITE */ +/* = 7 - LVDS */ +/* = 8 - DIGITAL LINK */ +/* = 9 - SCART */ +/* = 0xA - HDMI_type A */ +/* = 0xB - HDMI_type B */ +/* = 0xE - Special case1 (DVI+DIN) */ +/* Others=TBD */ +/* [3:0] - DAC Associated */ +/* = 0 - no DAC */ +/* = 1 - DACA */ +/* = 2 - DACB */ +/* = 3 - External DAC */ +/* Others=TBD */ +/* */ + +typedef struct _ATOM_CONNECTOR_INFO { +#if ATOM_BIG_ENDIAN + UCHAR bfConnectorType:4; + UCHAR bfAssociatedDAC:4; +#else + UCHAR bfAssociatedDAC:4; + UCHAR bfConnectorType:4; +#endif +} ATOM_CONNECTOR_INFO; + +typedef union _ATOM_CONNECTOR_INFO_ACCESS { + ATOM_CONNECTOR_INFO sbfAccess; + UCHAR ucAccess; +} ATOM_CONNECTOR_INFO_ACCESS; + +typedef struct _ATOM_CONNECTOR_INFO_I2C { + ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; +} ATOM_CONNECTOR_INFO_I2C; + +typedef struct _ATOM_SUPPORTED_DEVICES_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO]; +} ATOM_SUPPORTED_DEVICES_INFO; + +#define NO_INT_SRC_MAPPED 0xFF + +typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP { + UCHAR ucIntSrcBitmap; +} ATOM_CONNECTOR_INC_SRC_BITMAP; + +typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2]; + ATOM_CONNECTOR_INC_SRC_BITMAP + asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2]; +} ATOM_SUPPORTED_DEVICES_INFO_2; + +typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE]; + ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE]; +} ATOM_SUPPORTED_DEVICES_INFO_2d1; + +#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1 + +typedef struct _ATOM_MISC_CONTROL_INFO { + USHORT usFrequency; + UCHAR ucPLL_ChargePump; /* PLL charge-pump gain control */ + UCHAR ucPLL_DutyCycle; /* PLL duty cycle control */ + UCHAR ucPLL_VCO_Gain; /* PLL VCO gain control */ + UCHAR ucPLL_VoltageSwing; /* PLL driver voltage swing control */ +} ATOM_MISC_CONTROL_INFO; + +#define ATOM_MAX_MISC_INFO 4 + +typedef struct _ATOM_TMDS_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMaxFrequency; /* in 10Khz */ + ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO]; +} ATOM_TMDS_INFO; + +typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE { + UCHAR ucTVStandard; /* Same as TV standards defined above, */ + UCHAR ucPadding[1]; +} ATOM_ENCODER_ANALOG_ATTRIBUTE; + +typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE { + UCHAR ucAttribute; /* Same as other digital encoder attributes defined above */ + UCHAR ucPadding[1]; +} ATOM_ENCODER_DIGITAL_ATTRIBUTE; + +typedef union _ATOM_ENCODER_ATTRIBUTE { + ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib; + ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib; +} ATOM_ENCODER_ATTRIBUTE; + +typedef struct _DVO_ENCODER_CONTROL_PARAMETERS { + USHORT usPixelClock; + USHORT usEncoderID; + UCHAR ucDeviceType; /* Use ATOM_DEVICE_xxx1_Index to indicate device type only. */ + UCHAR ucAction; /* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */ + ATOM_ENCODER_ATTRIBUTE usDevAttr; +} DVO_ENCODER_CONTROL_PARAMETERS; + +typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION { + DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; /* Caller doesn't need to init this portion */ +} DVO_ENCODER_CONTROL_PS_ALLOCATION; + +#define ATOM_XTMDS_ASIC_SI164_ID 1 +#define ATOM_XTMDS_ASIC_SI178_ID 2 +#define ATOM_XTMDS_ASIC_TFP513_ID 3 +#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001 +#define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002 +#define ATOM_XTMDS_MVPU_FPGA 0x00000004 + +typedef struct _ATOM_XTMDS_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usSingleLinkMaxFrequency; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; /* Point the ID on which I2C is used to control external chip */ + UCHAR ucXtransimitterID; + UCHAR ucSupportedLink; /* Bit field, bit0=1, single link supported;bit1=1,dual link supported */ + UCHAR ucSequnceAlterID; /* Even with the same external TMDS asic, it's possible that the program seqence alters */ + /* due to design. This ID is used to alert driver that the sequence is not "standard"! */ + UCHAR ucMasterAddress; /* Address to control Master xTMDS Chip */ + UCHAR ucSlaveAddress; /* Address to control Slave xTMDS Chip */ +} ATOM_XTMDS_INFO; + +typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS { + UCHAR ucEnable; /* ATOM_ENABLE=On or ATOM_DISABLE=Off */ + UCHAR ucDevice; /* ATOM_DEVICE_DFP1_INDEX.... */ + UCHAR ucPadding[2]; +} DFP_DPMS_STATUS_CHANGE_PARAMETERS; + +/****************************Legacy Power Play Table Definitions **********************/ + +/* Definitions for ulPowerPlayMiscInfo */ +#define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L +#define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L +#define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L + +#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L +#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L + +#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L + +#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L +#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L +#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L /* When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program */ + +#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L +#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L +#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L +#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L +#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L +#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L +#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L + +#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L +#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L +#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L +#define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L +#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L + +#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L /* 0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved */ +#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20 + +#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L +#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L +#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L +#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L /* When set, Dynamic */ +#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L /* When set, Dynamic */ +#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L /* When set, This mode is for acceleated 3D mode */ + +#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L /* 1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) */ +#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28 +#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L + +#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L +#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L +#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L +#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L +#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L +#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L +#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L /* If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. */ + /* If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback */ +#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L +#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L +#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L + +/* ucTableFormatRevision=1 */ +/* ucTableContentRevision=1 */ +typedef struct _ATOM_POWERMODE_INFO { + ULONG ulMiscInfo; /* The power level should be arranged in ascending order */ + ULONG ulReserved1; /* must set to 0 */ + ULONG ulReserved2; /* must set to 0 */ + USHORT usEngineClock; + USHORT usMemoryClock; + UCHAR ucVoltageDropIndex; /* index to GPIO table */ + UCHAR ucSelectedPanel_RefreshRate; /* panel refresh rate */ + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucNumPciELanes; /* number of PCIE lanes */ +} ATOM_POWERMODE_INFO; + +/* ucTableFormatRevision=2 */ +/* ucTableContentRevision=1 */ +typedef struct _ATOM_POWERMODE_INFO_V2 { + ULONG ulMiscInfo; /* The power level should be arranged in ascending order */ + ULONG ulMiscInfo2; + ULONG ulEngineClock; + ULONG ulMemoryClock; + UCHAR ucVoltageDropIndex; /* index to GPIO table */ + UCHAR ucSelectedPanel_RefreshRate; /* panel refresh rate */ + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucNumPciELanes; /* number of PCIE lanes */ +} ATOM_POWERMODE_INFO_V2; + +/* ucTableFormatRevision=2 */ +/* ucTableContentRevision=2 */ +typedef struct _ATOM_POWERMODE_INFO_V3 { + ULONG ulMiscInfo; /* The power level should be arranged in ascending order */ + ULONG ulMiscInfo2; + ULONG ulEngineClock; + ULONG ulMemoryClock; + UCHAR ucVoltageDropIndex; /* index to Core (VDDC) votage table */ + UCHAR ucSelectedPanel_RefreshRate; /* panel refresh rate */ + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucNumPciELanes; /* number of PCIE lanes */ + UCHAR ucVDDCI_VoltageDropIndex; /* index to VDDCI votage table */ +} ATOM_POWERMODE_INFO_V3; + +#define ATOM_MAX_NUMBEROF_POWER_BLOCK 8 + +#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01 +#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02 + +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 /* Andigilog */ + +typedef struct _ATOM_POWERPLAY_INFO { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucOverdriveThermalController; + UCHAR ucOverdriveI2cLine; + UCHAR ucOverdriveIntBitmap; + UCHAR ucOverdriveControllerAddress; + UCHAR ucSizeOfPowerModeEntry; + UCHAR ucNumOfPowerModeEntries; + ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; +} ATOM_POWERPLAY_INFO; + +typedef struct _ATOM_POWERPLAY_INFO_V2 { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucOverdriveThermalController; + UCHAR ucOverdriveI2cLine; + UCHAR ucOverdriveIntBitmap; + UCHAR ucOverdriveControllerAddress; + UCHAR ucSizeOfPowerModeEntry; + UCHAR ucNumOfPowerModeEntries; + ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; +} ATOM_POWERPLAY_INFO_V2; + +typedef struct _ATOM_POWERPLAY_INFO_V3 { + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucOverdriveThermalController; + UCHAR ucOverdriveI2cLine; + UCHAR ucOverdriveIntBitmap; + UCHAR ucOverdriveControllerAddress; + UCHAR ucSizeOfPowerModeEntry; + UCHAR ucNumOfPowerModeEntries; + ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; +} ATOM_POWERPLAY_INFO_V3; + +/**************************************************************************/ + +/* Following definitions are for compatiblity issue in different SW components. */ +#define ATOM_MASTER_DATA_TABLE_REVISION 0x01 +#define Object_Info Object_Header +#define AdjustARB_SEQ MC_InitParameter +#define VRAM_GPIO_DetectionInfo VoltageObjectInfo +#define ASIC_VDDCI_Info ASIC_ProfilingInfo +#define ASIC_MVDDQ_Info MemoryTrainingInfo +#define SS_Info PPLL_SS_Info +#define ASIC_MVDDC_Info ASIC_InternalSS_Info +#define DispDevicePriorityInfo SaveRestoreInfo +#define DispOutInfo TV_VideoMode + +#define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE +#define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE + +/* New device naming, remove them when both DAL/VBIOS is ready */ +#define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS +#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS + +#define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS +#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS + +#define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS +#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION + +#define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT +#define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT + +#define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX +#define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX + +#define ATOM_DEVICE_DFP2I_INDEX 0x00000009 +#define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX) + +#define ATOM_S0_DFP1I ATOM_S0_DFP1 +#define ATOM_S0_DFP1X ATOM_S0_DFP2 + +#define ATOM_S0_DFP2I 0x00200000L +#define ATOM_S0_DFP2Ib2 0x20 + +#define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE +#define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE + +#define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L +#define ATOM_S2_DFP2I_DPMS_STATEb3 0x02 + +#define ATOM_S3_DFP2I_ACTIVEb1 0x02 + +#define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE +#define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE + +#define ATOM_S3_DFP2I_ACTIVE 0x00000200L + +#define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE +#define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE +#define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L + +#define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02 +#define ATOM_S5_DOS_REQ_DFP2Ib1 0x02 + +#define ATOM_S5_DOS_REQ_DFP2I 0x0200 +#define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1 +#define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2 + +#define ATOM_S6_ACC_REQ_DFP2Ib3 0x02 +#define ATOM_S6_ACC_REQ_DFP2I 0x02000000L + +#define TMDS1XEncoderControl DVOEncoderControl +#define DFP1XOutputControl DVOOutputControl + +#define ExternalDFPOutputControl DFP1XOutputControl +#define EnableExternalTMDS_Encoder TMDS1XEncoderControl + +#define DFP1IOutputControl TMDSAOutputControl +#define DFP2IOutputControl LVTMAOutputControl + +#define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS +#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION + +#define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS +#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION + +#define ucDac1Standard ucDacStandard +#define ucDac2Standard ucDacStandard + +#define TMDS1EncoderControl TMDSAEncoderControl +#define TMDS2EncoderControl LVTMAEncoderControl + +#define DFP1OutputControl TMDSAOutputControl +#define DFP2OutputControl LVTMAOutputControl +#define CRT1OutputControl DAC1OutputControl +#define CRT2OutputControl DAC2OutputControl + +/* These two lines will be removed for sure in a few days, will follow up with Michael V. */ +#define EnableLVDS_SS EnableSpreadSpectrumOnPPLL +#define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL + +/*********************************************************************************/ + +#pragma pack() /* BIOS data must use byte aligment */ + +#endif /* _ATOMBIOS_H */ |