diff options
Diffstat (limited to 'drivers/gpu/drm/tegra/rgb.c')
| -rw-r--r-- | drivers/gpu/drm/tegra/rgb.c | 102 |
1 files changed, 54 insertions, 48 deletions
diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c index 0562a7eb793f..4142a56ca764 100644 --- a/drivers/gpu/drm/tegra/rgb.c +++ b/drivers/gpu/drm/tegra/rgb.c @@ -7,7 +7,7 @@ #include <linux/clk.h> #include <drm/drm_atomic_helper.h> -#include <drm/drm_panel.h> +#include <drm/drm_bridge_connector.h> #include <drm/drm_simple_kms_helper.h> #include "drm.h" @@ -85,45 +85,13 @@ static void tegra_dc_write_regs(struct tegra_dc *dc, tegra_dc_writel(dc, table[i].value, table[i].offset); } -static const struct drm_connector_funcs tegra_rgb_connector_funcs = { - .reset = drm_atomic_helper_connector_reset, - .detect = tegra_output_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = tegra_output_connector_destroy, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static enum drm_mode_status -tegra_rgb_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - /* - * FIXME: For now, always assume that the mode is okay. There are - * unresolved issues with clk_round_rate(), which doesn't always - * reliably report whether a frequency can be set or not. - */ - return MODE_OK; -} - -static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = { - .get_modes = tegra_output_connector_get_modes, - .mode_valid = tegra_rgb_connector_mode_valid, -}; - static void tegra_rgb_encoder_disable(struct drm_encoder *encoder) { struct tegra_output *output = encoder_to_output(encoder); struct tegra_rgb *rgb = to_rgb(output); - if (output->panel) - drm_panel_disable(output->panel); - tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); tegra_dc_commit(rgb->dc); - - if (output->panel) - drm_panel_unprepare(output->panel); } static void tegra_rgb_encoder_enable(struct drm_encoder *encoder) @@ -132,9 +100,6 @@ static void tegra_rgb_encoder_enable(struct drm_encoder *encoder) struct tegra_rgb *rgb = to_rgb(output); u32 value; - if (output->panel) - drm_panel_prepare(output->panel); - tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL; @@ -156,9 +121,6 @@ static void tegra_rgb_encoder_enable(struct drm_encoder *encoder) tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS); tegra_dc_commit(rgb->dc); - - if (output->panel) - drm_panel_enable(output->panel); } static int @@ -267,24 +229,68 @@ int tegra_dc_rgb_remove(struct tegra_dc *dc) int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc) { struct tegra_output *output = dc->rgb; + struct drm_connector *connector; int err; if (!dc->rgb) return -ENODEV; - drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs, - DRM_MODE_CONNECTOR_LVDS); - drm_connector_helper_add(&output->connector, - &tegra_rgb_connector_helper_funcs); - output->connector.dpms = DRM_MODE_DPMS_OFF; - drm_simple_encoder_init(drm, &output->encoder, DRM_MODE_ENCODER_LVDS); drm_encoder_helper_add(&output->encoder, &tegra_rgb_encoder_helper_funcs); - drm_connector_attach_encoder(&output->connector, - &output->encoder); - drm_connector_register(&output->connector); + /* + * Wrap directly-connected panel into DRM bridge in order to let + * DRM core to handle panel for us. + */ + if (output->panel) { + output->bridge = devm_drm_panel_bridge_add(output->dev, + output->panel); + if (IS_ERR(output->bridge)) { + dev_err(output->dev, + "failed to wrap panel into bridge: %pe\n", + output->bridge); + return PTR_ERR(output->bridge); + } + + output->panel = NULL; + } + + /* + * Tegra devices that have LVDS panel utilize LVDS encoder bridge + * for converting up to 28 LCD LVTTL lanes into 5/4 LVDS lanes that + * go to display panel's receiver. + * + * Encoder usually have a power-down control which needs to be enabled + * in order to transmit data to the panel. Historically devices that + * use an older device-tree version didn't model the bridge, assuming + * that encoder is turned ON by default, while today's DRM allows us + * to model LVDS encoder properly. + * + * Newer device-trees utilize LVDS encoder bridge, which provides + * us with a connector and handles the display panel. + * + * For older device-trees we wrapped panel into the panel-bridge. + */ + if (output->bridge) { + err = drm_bridge_attach(&output->encoder, output->bridge, + NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR); + if (err) { + dev_err(output->dev, "failed to attach bridge: %d\n", + err); + return err; + } + + connector = drm_bridge_connector_init(drm, &output->encoder); + if (IS_ERR(connector)) { + dev_err(output->dev, + "failed to initialize bridge connector: %pe\n", + connector); + return PTR_ERR(connector); + } + + drm_connector_attach_encoder(connector, &output->encoder); + } err = tegra_output_init(drm, output); if (err < 0) { |