diff options
Diffstat (limited to 'drivers/gpu')
53 files changed, 917 insertions, 687 deletions
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 9d25dbbe6771..48e38ba22783 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,7 +23,7 @@ drm-$(CONFIG_DRM_PANEL) += drm_panel.o drm-usb-y := drm_usb.o -drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o +drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_KMS_FB_HELPER) += drm_fb_helper.o drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c index 977cfb35837a..635f6ffc27c2 100644 --- a/drivers/gpu/drm/ast/ast_post.c +++ b/drivers/gpu/drm/ast/ast_post.c @@ -572,7 +572,7 @@ static u32 cbr_scan2(struct ast_private *ast) for (loop = 0; loop < CBR_PASSNUM2; loop++) { if ((data = cbr_test2(ast)) != 0) { data2 &= data; - if (!data) + if (!data2) return 0; break; } diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h index 741965c001a6..7eb52dd44b01 100644 --- a/drivers/gpu/drm/bochs/bochs.h +++ b/drivers/gpu/drm/bochs/bochs.h @@ -1,5 +1,6 @@ #include <linux/io.h> #include <linux/fb.h> +#include <linux/console.h> #include <drm/drmP.h> #include <drm/drm_crtc.h> @@ -87,8 +88,6 @@ struct bochs_device { struct bochs_framebuffer gfb; struct drm_fb_helper helper; int size; - int x1, y1, x2, y2; /* dirty rect */ - spinlock_t dirty_lock; bool initialized; } fb; }; diff --git a/drivers/gpu/drm/bochs/bochs_drv.c b/drivers/gpu/drm/bochs/bochs_drv.c index 395bba261c9a..9c13df29fd20 100644 --- a/drivers/gpu/drm/bochs/bochs_drv.c +++ b/drivers/gpu/drm/bochs/bochs_drv.c @@ -95,6 +95,49 @@ static struct drm_driver bochs_driver = { }; /* ---------------------------------------------------------------------- */ +/* pm interface */ + +static int bochs_pm_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + struct bochs_device *bochs = drm_dev->dev_private; + + drm_kms_helper_poll_disable(drm_dev); + + if (bochs->fb.initialized) { + console_lock(); + fb_set_suspend(bochs->fb.helper.fbdev, 1); + console_unlock(); + } + + return 0; +} + +static int bochs_pm_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + struct bochs_device *bochs = drm_dev->dev_private; + + drm_helper_resume_force_mode(drm_dev); + + if (bochs->fb.initialized) { + console_lock(); + fb_set_suspend(bochs->fb.helper.fbdev, 0); + console_unlock(); + } + + drm_kms_helper_poll_enable(drm_dev); + return 0; +} + +static const struct dev_pm_ops bochs_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(bochs_pm_suspend, + bochs_pm_resume) +}; + +/* ---------------------------------------------------------------------- */ /* pci interface */ static int bochs_kick_out_firmware_fb(struct pci_dev *pdev) @@ -155,6 +198,7 @@ static struct pci_driver bochs_pci_driver = { .id_table = bochs_pci_tbl, .probe = bochs_pci_probe, .remove = bochs_pci_remove, + .driver.pm = &bochs_pm_ops, }; /* ---------------------------------------------------------------------- */ diff --git a/drivers/gpu/drm/bochs/bochs_fbdev.c b/drivers/gpu/drm/bochs/bochs_fbdev.c index 4da5206b7cc9..561b84474122 100644 --- a/drivers/gpu/drm/bochs/bochs_fbdev.c +++ b/drivers/gpu/drm/bochs/bochs_fbdev.c @@ -190,7 +190,6 @@ int bochs_fbdev_init(struct bochs_device *bochs) int ret; bochs->fb.helper.funcs = &bochs_fb_helper_funcs; - spin_lock_init(&bochs->fb.dirty_lock); ret = drm_fb_helper_init(bochs->dev, &bochs->fb.helper, 1, 1); diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c index 953fc8aea69c..08ce520f61a5 100644 --- a/drivers/gpu/drm/cirrus/cirrus_drv.c +++ b/drivers/gpu/drm/cirrus/cirrus_drv.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/console.h> #include <drm/drmP.h> +#include <drm/drm_crtc_helper.h> #include "cirrus_drv.h" @@ -75,6 +76,41 @@ static void cirrus_pci_remove(struct pci_dev *pdev) drm_put_dev(dev); } +static int cirrus_pm_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + struct cirrus_device *cdev = drm_dev->dev_private; + + drm_kms_helper_poll_disable(drm_dev); + + if (cdev->mode_info.gfbdev) { + console_lock(); + fb_set_suspend(cdev->mode_info.gfbdev->helper.fbdev, 1); + console_unlock(); + } + + return 0; +} + +static int cirrus_pm_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *drm_dev = pci_get_drvdata(pdev); + struct cirrus_device *cdev = drm_dev->dev_private; + + drm_helper_resume_force_mode(drm_dev); + + if (cdev->mode_info.gfbdev) { + console_lock(); + fb_set_suspend(cdev->mode_info.gfbdev->helper.fbdev, 0); + console_unlock(); + } + + drm_kms_helper_poll_enable(drm_dev); + return 0; +} + static const struct file_operations cirrus_driver_fops = { .owner = THIS_MODULE, .open = drm_open, @@ -103,11 +139,17 @@ static struct drm_driver driver = { .dumb_destroy = drm_gem_dumb_destroy, }; +static const struct dev_pm_ops cirrus_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cirrus_pm_suspend, + cirrus_pm_resume) +}; + static struct pci_driver cirrus_pci_driver = { .name = DRIVER_NAME, .id_table = pciidlist, .probe = cirrus_pci_probe, .remove = cirrus_pci_remove, + .driver.pm = &cirrus_pm_ops, }; static int __init cirrus_init(void) diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c index 2d64aea83df2..f59433b7610c 100644 --- a/drivers/gpu/drm/cirrus/cirrus_mode.c +++ b/drivers/gpu/drm/cirrus/cirrus_mode.c @@ -308,6 +308,9 @@ static int cirrus_crtc_mode_set(struct drm_crtc *crtc, WREG_HDR(hdr); cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0); + + /* Unblank (needed on S3 resume, vgabios doesn't do it then) */ + outb(0x20, 0x3c0); return 0; } diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c index bb8f58012189..534cb89b160d 100644 --- a/drivers/gpu/drm/drm_cache.c +++ b/drivers/gpu/drm/drm_cache.c @@ -32,6 +32,12 @@ #include <drm/drmP.h> #if defined(CONFIG_X86) + +/* + * clflushopt is an unordered instruction which needs fencing with mfence or + * sfence to avoid ordering issues. For drm_clflush_page this fencing happens + * in the caller. + */ static void drm_clflush_page(struct page *page) { @@ -44,7 +50,7 @@ drm_clflush_page(struct page *page) page_virtual = kmap_atomic(page); for (i = 0; i < PAGE_SIZE; i += size) - clflush(page_virtual + i); + clflushopt(page_virtual + i); kunmap_atomic(page_virtual); } @@ -133,7 +139,7 @@ drm_clflush_virt_range(char *addr, unsigned long length) mb(); for (; addr < end; addr += boot_cpu_data.x86_clflush_size) clflush(addr); - clflush(end - 1); + clflushopt(end - 1); mb(); return; } diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1fbe8427c70e..df281b54db01 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -72,147 +72,6 @@ void drm_helper_move_panel_connectors_to_head(struct drm_device *dev) } EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head); -static bool drm_kms_helper_poll = true; -module_param_named(poll, drm_kms_helper_poll, bool, 0600); - -static void drm_mode_validate_flag(struct drm_connector *connector, - int flags) -{ - struct drm_display_mode *mode; - - if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE | - DRM_MODE_FLAG_3D_MASK)) - return; - - list_for_each_entry(mode, &connector->modes, head) { - if ((mode->flags & DRM_MODE_FLAG_INTERLACE) && - !(flags & DRM_MODE_FLAG_INTERLACE)) - mode->status = MODE_NO_INTERLACE; - if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) && - !(flags & DRM_MODE_FLAG_DBLSCAN)) - mode->status = MODE_NO_DBLESCAN; - if ((mode->flags & DRM_MODE_FLAG_3D_MASK) && - !(flags & DRM_MODE_FLAG_3D_MASK)) - mode->status = MODE_NO_STEREO; - } - - return; -} - -/** - * drm_helper_probe_single_connector_modes - get complete set of display modes - * @connector: connector to probe - * @maxX: max width for modes - * @maxY: max height for modes - * - * Based on the helper callbacks implemented by @connector try to detect all - * valid modes. Modes will first be added to the connector's probed_modes list, - * then culled (based on validity and the @maxX, @maxY parameters) and put into - * the normal modes list. - * - * Intended to be use as a generic implementation of the ->fill_modes() - * @connector vfunc for drivers that use the crtc helpers for output mode - * filtering and detection. - * - * Returns: - * The number of modes found on @connector. - */ -int drm_helper_probe_single_connector_modes(struct drm_connector *connector, - uint32_t maxX, uint32_t maxY) -{ - struct drm_device *dev = connector->dev; - struct drm_display_mode *mode; - struct drm_connector_helper_funcs *connector_funcs = - connector->helper_private; - int count = 0; - int mode_flags = 0; - bool verbose_prune = true; - - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, - drm_get_connector_name(connector)); - /* set all modes to the unverified state */ - list_for_each_entry(mode, &connector->modes, head) - mode->status = MODE_UNVERIFIED; - - if (connector->force) { - if (connector->force == DRM_FORCE_ON) - connector->status = connector_status_connected; - else - connector->status = connector_status_disconnected; - if (connector->funcs->force) - connector->funcs->force(connector); - } else { - connector->status = connector->funcs->detect(connector, true); - } - - /* Re-enable polling in case the global poll config changed. */ - if (drm_kms_helper_poll != dev->mode_config.poll_running) - drm_kms_helper_poll_enable(dev); - - dev->mode_config.poll_running = drm_kms_helper_poll; - - if (connector->status == connector_status_disconnected) { - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", - connector->base.id, drm_get_connector_name(connector)); - drm_mode_connector_update_edid_property(connector, NULL); - verbose_prune = false; - goto prune; - } - -#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE - count = drm_load_edid_firmware(connector); - if (count == 0) -#endif - count = (*connector_funcs->get_modes)(connector); - - if (count == 0 && connector->status == connector_status_connected) - count = drm_add_modes_noedid(connector, 1024, 768); - if (count == 0) - goto prune; - - drm_mode_connector_list_update(connector); - - if (maxX && maxY) - drm_mode_validate_size(dev, &connector->modes, maxX, maxY); - - if (connector->interlace_allowed) - mode_flags |= DRM_MODE_FLAG_INTERLACE; - if (connector->doublescan_allowed) - mode_flags |= DRM_MODE_FLAG_DBLSCAN; - if (connector->stereo_allowed) - mode_flags |= DRM_MODE_FLAG_3D_MASK; - drm_mode_validate_flag(connector, mode_flags); - - list_for_each_entry(mode, &connector->modes, head) { - if (mode->status == MODE_OK) - mode->status = connector_funcs->mode_valid(connector, - mode); - } - -prune: - drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); - - if (list_empty(&connector->modes)) - return 0; - - list_for_each_entry(mode, &connector->modes, head) - mode->vrefresh = drm_mode_vrefresh(mode); - - drm_mode_sort(&connector->modes); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, - drm_get_connector_name(connector)); - list_for_each_entry(mode, &connector->modes, head) { - drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); - drm_mode_debug_printmodeline(mode); - } - - return count; -} -EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); - /** * drm_helper_encoder_in_use - check if a given encoder is in use * @encoder: encoder to check @@ -566,7 +425,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc) * @set: mode set configuration * * Setup a new configuration, provided by the upper layers (either an ioctl call - * from userspace or internally e.g. from the fbdev suppport code) in @set, and + * from userspace or internally e.g. from the fbdev support code) in @set, and * enable it. This is the main helper functions for drivers that implement * kernel mode setting with the crtc helper functions and the assorted * ->prepare(), ->modeset() and ->commit() helper callbacks. @@ -1020,232 +879,3 @@ void drm_helper_resume_force_mode(struct drm_device *dev) drm_modeset_unlock_all(dev); } EXPORT_SYMBOL(drm_helper_resume_force_mode); - -/** - * drm_kms_helper_hotplug_event - fire off KMS hotplug events - * @dev: drm_device whose connector state changed - * - * This function fires off the uevent for userspace and also calls the - * output_poll_changed function, which is most commonly used to inform the fbdev - * emulation code and allow it to update the fbcon output configuration. - * - * Drivers should call this from their hotplug handling code when a change is - * detected. Note that this function does not do any output detection of its - * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the - * driver already. - * - * This function must be called from process context with no mode - * setting locks held. - */ -void drm_kms_helper_hotplug_event(struct drm_device *dev) -{ - /* send a uevent + call fbdev */ - drm_sysfs_hotplug_event(dev); - if (dev->mode_config.funcs->output_poll_changed) - dev->mode_config.funcs->output_poll_changed(dev); -} -EXPORT_SYMBOL(drm_kms_helper_hotplug_event); - -#define DRM_OUTPUT_POLL_PERIOD (10*HZ) -static void output_poll_execute(struct work_struct *work) -{ - struct delayed_work *delayed_work = to_delayed_work(work); - struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); - struct drm_connector *connector; - enum drm_connector_status old_status; - bool repoll = false, changed = false; - - if (!drm_kms_helper_poll) - return; - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - - /* Ignore forced connectors. */ - if (connector->force) - continue; - - /* Ignore HPD capable connectors and connectors where we don't - * want any hotplug detection at all for polling. */ - if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD) - continue; - - repoll = true; - - old_status = connector->status; - /* if we are connected and don't want to poll for disconnect - skip it */ - if (old_status == connector_status_connected && - !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT)) - continue; - - connector->status = connector->funcs->detect(connector, false); - if (old_status != connector->status) { - const char *old, *new; - - old = drm_get_connector_status_name(old_status); - new = drm_get_connector_status_name(connector->status); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " - "status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - old, new); - - changed = true; - } - } - - mutex_unlock(&dev->mode_config.mutex); - - if (changed) - drm_kms_helper_hotplug_event(dev); - - if (repoll) - schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); -} - -/** - * drm_kms_helper_poll_disable - disable output polling - * @dev: drm_device - * - * This function disables the output polling work. - * - * Drivers can call this helper from their device suspend implementation. It is - * not an error to call this even when output polling isn't enabled or arlready - * disabled. - */ -void drm_kms_helper_poll_disable(struct drm_device *dev) -{ - if (!dev->mode_config.poll_enabled) - return; - cancel_delayed_work_sync(&dev->mode_config.output_poll_work); -} -EXPORT_SYMBOL(drm_kms_helper_poll_disable); - -/** - * drm_kms_helper_poll_enable - re-enable output polling. - * @dev: drm_device - * - * This function re-enables the output polling work. - * - * Drivers can call this helper from their device resume implementation. It is - * an error to call this when the output polling support has not yet been set - * up. - */ -void drm_kms_helper_poll_enable(struct drm_device *dev) -{ - bool poll = false; - struct drm_connector *connector; - - if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) - return; - - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT)) - poll = true; - } - - if (poll) - schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); -} -EXPORT_SYMBOL(drm_kms_helper_poll_enable); - -/** - * drm_kms_helper_poll_init - initialize and enable output polling - * @dev: drm_device - * - * This function intializes and then also enables output polling support for - * @dev. Drivers which do not have reliable hotplug support in hardware can use - * this helper infrastructure to regularly poll such connectors for changes in - * their connection state. - * - * Drivers can control which connectors are polled by setting the - * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On - * connectors where probing live outputs can result in visual distortion drivers - * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this. - * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are - * completely ignored by the polling logic. - * - * Note that a connector can be both polled and probed from the hotplug handler, - * in case the hotplug interrupt is known to be unreliable. - */ -void drm_kms_helper_poll_init(struct drm_device *dev) -{ - INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute); - dev->mode_config.poll_enabled = true; - - drm_kms_helper_poll_enable(dev); -} -EXPORT_SYMBOL(drm_kms_helper_poll_init); - -/** - * drm_kms_helper_poll_fini - disable output polling and clean it up - * @dev: drm_device - */ -void drm_kms_helper_poll_fini(struct drm_device *dev) -{ - drm_kms_helper_poll_disable(dev); -} -EXPORT_SYMBOL(drm_kms_helper_poll_fini); - -/** - * drm_helper_hpd_irq_event - hotplug processing - * @dev: drm_device - * - * Drivers can use this helper function to run a detect cycle on all connectors - * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All - * other connectors are ignored, which is useful to avoid reprobing fixed - * panels. - * - * This helper function is useful for drivers which can't or don't track hotplug - * interrupts for each connector. - * - * Drivers which support hotplug interrupts for each connector individually and - * which have a more fine-grained detect logic should bypass this code and - * directly call drm_kms_helper_hotplug_event() in case the connector state - * changed. - * - * This function must be called from process context with no mode - * setting locks held. - * - * Note that a connector can be both polled and probed from the hotplug handler, - * in case the hotplug interrupt is known to be unreliable. - */ -bool drm_helper_hpd_irq_event(struct drm_device *dev) -{ - struct drm_connector *connector; - enum drm_connector_status old_status; - bool changed = false; - - if (!dev->mode_config.poll_enabled) - return false; - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - - /* Only handle HPD capable connectors. */ - if (!(connector->polled & DRM_CONNECTOR_POLL_HPD)) - continue; - - old_status = connector->status; - - connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - drm_get_connector_status_name(old_status), - drm_get_connector_status_name(connector->status)); - if (old_status != connector->status) - changed = true; - } - - mutex_unlock(&dev->mode_config.mutex); - - if (changed) - drm_kms_helper_hotplug_event(dev); - - return changed; -} -EXPORT_SYMBOL(drm_helper_hpd_irq_event); diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index a0ce39c96f8e..e1eba0b7cd45 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -285,7 +285,8 @@ static int drm_open_helper(struct inode *inode, struct file *filp, pci_dev_put(pci_dev); } if (!dev->hose) { - struct pci_bus *b = pci_bus_b(pci_root_buses.next); + struct pci_bus *b = list_entry(pci_root_buses.next, + struct pci_bus, node); if (b) dev->hose = b->sysdata; } diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index 71e2d3fcd6ee..04a209e2b66d 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -207,8 +207,6 @@ int drm_mm_reserve_node(struct drm_mm *mm, struct drm_mm_node *node) return 0; } - WARN(1, "no hole found for node 0x%lx + 0x%lx\n", - node->start, node->size); return -ENOSPC; } EXPORT_SYMBOL(drm_mm_reserve_node); diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c index e768d35ff22e..d2b1c03b3d71 100644 --- a/drivers/gpu/drm/drm_plane_helper.c +++ b/drivers/gpu/drm/drm_plane_helper.c @@ -203,9 +203,9 @@ EXPORT_SYMBOL(drm_primary_helper_update); * * Provides a default plane disable handler for primary planes. This is handler * is called in response to a userspace SetPlane operation on the plane with a - * NULL framebuffer parameter. We call the driver's modeset handler with a NULL - * framebuffer to disable the CRTC if no other planes are currently enabled. - * If other planes are still enabled on the same CRTC, we return -EBUSY. + * NULL framebuffer parameter. It unconditionally fails the disable call with + * -EINVAL the only way to disable the primary plane without driver support is + * to disable the entier CRTC. Which does not match the plane ->disable hook. * * Note that some hardware may be able to disable the primary plane without * disabling the whole CRTC. Drivers for such hardware should provide their @@ -214,34 +214,11 @@ EXPORT_SYMBOL(drm_primary_helper_update); * disabled primary plane). * * RETURNS: - * Zero on success, error code on failure + * Unconditionally returns -EINVAL. */ int drm_primary_helper_disable(struct drm_plane *plane) { - struct drm_plane *p; - struct drm_mode_set set = { - .crtc = plane->crtc, - .fb = NULL, - }; - - if (plane->crtc == NULL || plane->fb == NULL) - /* Already disabled */ - return 0; - - list_for_each_entry(p, &plane->dev->mode_config.plane_list, head) - if (p != plane && p->fb) { - DRM_DEBUG_KMS("Cannot disable primary plane while other planes are still active on CRTC.\n"); - return -EBUSY; - } - - /* - * N.B. We call set_config() directly here rather than - * drm_mode_set_config_internal() since drm_mode_setplane() already - * handles the basic refcounting and we don't need the special - * cross-CRTC refcounting (no chance of stealing connectors from - * other CRTC's with this update). - */ - return plane->crtc->funcs->set_config(&set); + return -EINVAL; } EXPORT_SYMBOL(drm_primary_helper_disable); diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index f1437b6c8dbf..304ca8cacbc4 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -511,7 +511,7 @@ struct drm_gem_object *drm_gem_prime_import(struct drm_device *dev, get_dma_buf(dma_buf); sgt = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL); - if (IS_ERR_OR_NULL(sgt)) { + if (IS_ERR(sgt)) { ret = PTR_ERR(sgt); goto fail_detach; } diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c new file mode 100644 index 000000000000..e70f54d4a581 --- /dev/null +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -0,0 +1,426 @@ +/* + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * + * DRM core CRTC related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + * + * Authors: + * Keith Packard + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/export.h> +#include <linux/moduleparam.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_edid.h> + +/** + * DOC: output probing helper overview + * + * This library provides some helper code for output probing. It provides an + * implementation of the core connector->fill_modes interface with + * drm_helper_probe_single_connector_modes. + * + * It also provides support for polling connectors with a work item and for + * generic hotplug interrupt handling where the driver doesn't or cannot keep + * track of a per-connector hpd interrupt. + * + * This helper library can be used independently of the modeset helper library. + * Drivers can also overwrite different parts e.g. use their own hotplug + * handling code to avoid probing unrelated outputs. + */ + +static bool drm_kms_helper_poll = true; +module_param_named(poll, drm_kms_helper_poll, bool, 0600); + +static void drm_mode_validate_flag(struct drm_connector *connector, + int flags) +{ + struct drm_display_mode *mode; + + if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE | + DRM_MODE_FLAG_3D_MASK)) + return; + + list_for_each_entry(mode, &connector->modes, head) { + if ((mode->flags & DRM_MODE_FLAG_INTERLACE) && + !(flags & DRM_MODE_FLAG_INTERLACE)) + mode->status = MODE_NO_INTERLACE; + if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) && + !(flags & DRM_MODE_FLAG_DBLSCAN)) + mode->status = MODE_NO_DBLESCAN; + if ((mode->flags & DRM_MODE_FLAG_3D_MASK) && + !(flags & DRM_MODE_FLAG_3D_MASK)) + mode->status = MODE_NO_STEREO; + } + + return; +} + +/** + * drm_helper_probe_single_connector_modes - get complete set of display modes + * @connector: connector to probe + * @maxX: max width for modes + * @maxY: max height for modes + * + * Based on the helper callbacks implemented by @connector try to detect all + * valid modes. Modes will first be added to the connector's probed_modes list, + * then culled (based on validity and the @maxX, @maxY parameters) and put into + * the normal modes list. + * + * Intended to be use as a generic implementation of the ->fill_modes() + * @connector vfunc for drivers that use the crtc helpers for output mode + * filtering and detection. + * + * Returns: + * The number of modes found on @connector. + */ +int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + struct drm_device *dev = connector->dev; + struct drm_display_mode *mode; + struct drm_connector_helper_funcs *connector_funcs = + connector->helper_private; + int count = 0; + int mode_flags = 0; + bool verbose_prune = true; + + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, + drm_get_connector_name(connector)); + /* set all modes to the unverified state */ + list_for_each_entry(mode, &connector->modes, head) + mode->status = MODE_UNVERIFIED; + + if (connector->force) { + if (connector->force == DRM_FORCE_ON) + connector->status = connector_status_connected; + else + connector->status = connector_status_disconnected; + if (connector->funcs->force) + connector->funcs->force(connector); + } else { + connector->status = connector->funcs->detect(connector, true); + } + + /* Re-enable polling in case the global poll config changed. */ + if (drm_kms_helper_poll != dev->mode_config.poll_running) + drm_kms_helper_poll_enable(dev); + + dev->mode_config.poll_running = drm_kms_helper_poll; + + if (connector->status == connector_status_disconnected) { + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", + connector->base.id, drm_get_connector_name(connector)); + drm_mode_connector_update_edid_property(connector, NULL); + verbose_prune = false; + goto prune; + } + +#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE + count = drm_load_edid_firmware(connector); + if (count == 0) +#endif + count = (*connector_funcs->get_modes)(connector); + + if (count == 0 && connector->status == connector_status_connected) + count = drm_add_modes_noedid(connector, 1024, 768); + if (count == 0) + goto prune; + + drm_mode_connector_list_update(connector); + + if (maxX && maxY) + drm_mode_validate_size(dev, &connector->modes, maxX, maxY); + + if (connector->interlace_allowed) + mode_flags |= DRM_MODE_FLAG_INTERLACE; + if (connector->doublescan_allowed) + mode_flags |= DRM_MODE_FLAG_DBLSCAN; + if (connector->stereo_allowed) + mode_flags |= DRM_MODE_FLAG_3D_MASK; + drm_mode_validate_flag(connector, mode_flags); + + list_for_each_entry(mode, &connector->modes, head) { + if (mode->status == MODE_OK) + mode->status = connector_funcs->mode_valid(connector, + mode); + } + +prune: + drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); + + if (list_empty(&connector->modes)) + return 0; + + list_for_each_entry(mode, &connector->modes, head) + mode->vrefresh = drm_mode_vrefresh(mode); + + drm_mode_sort(&connector->modes); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, + drm_get_connector_name(connector)); + list_for_each_entry(mode, &connector->modes, head) { + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); + drm_mode_debug_printmodeline(mode); + } + + return count; +} +EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); + +/** + * drm_kms_helper_hotplug_event - fire off KMS hotplug events + * @dev: drm_device whose connector state changed + * + * This function fires off the uevent for userspace and also calls the + * output_poll_changed function, which is most commonly used to inform the fbdev + * emulation code and allow it to update the fbcon output configuration. + * + * Drivers should call this from their hotplug handling code when a change is + * detected. Note that this function does not do any output detection of its + * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the + * driver already. + * + * This function must be called from process context with no mode + * setting locks held. + */ +void drm_kms_helper_hotplug_event(struct drm_device *dev) +{ + /* send a uevent + call fbdev */ + drm_sysfs_hotplug_event(dev); + if (dev->mode_config.funcs->output_poll_changed) + dev->mode_config.funcs->output_poll_changed(dev); +} +EXPORT_SYMBOL(drm_kms_helper_hotplug_event); + +#define DRM_OUTPUT_POLL_PERIOD (10*HZ) +static void output_poll_execute(struct work_struct *work) +{ + struct delayed_work *delayed_work = to_delayed_work(work); + struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); + struct drm_connector *connector; + enum drm_connector_status old_status; + bool repoll = false, changed = false; + + if (!drm_kms_helper_poll) + return; + + mutex_lock(&dev->mode_config.mutex); + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + + /* Ignore forced connectors. */ + if (connector->force) + continue; + + /* Ignore HPD capable connectors and connectors where we don't + * want any hotplug detection at all for polling. */ + if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD) + continue; + + repoll = true; + + old_status = connector->status; + /* if we are connected and don't want to poll for disconnect + skip it */ + if (old_status == connector_status_connected && + !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT)) + continue; + + connector->status = connector->funcs->detect(connector, false); + if (old_status != connector->status) { + const char *old, *new; + + old = drm_get_connector_status_name(old_status); + new = drm_get_connector_status_name(connector->status); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " + "status updated from %s to %s\n", + connector->base.id, + drm_get_connector_name(connector), + old, new); + + changed = true; + } + } + + mutex_unlock(&dev->mode_config.mutex); + + if (changed) + drm_kms_helper_hotplug_event(dev); + + if (repoll) + schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); +} + +/** + * drm_kms_helper_poll_disable - disable output polling + * @dev: drm_device + * + * This function disables the output polling work. + * + * Drivers can call this helper from their device suspend implementation. It is + * not an error to call this even when output polling isn't enabled or arlready + * disabled. + */ +void drm_kms_helper_poll_disable(struct drm_device *dev) +{ + if (!dev->mode_config.poll_enabled) + return; + cancel_delayed_work_sync(&dev->mode_config.output_poll_work); +} +EXPORT_SYMBOL(drm_kms_helper_poll_disable); + +/** + * drm_kms_helper_poll_enable - re-enable output polling. + * @dev: drm_device + * + * This function re-enables the output polling work. + * + * Drivers can call this helper from their device resume implementation. It is + * an error to call this when the output polling support has not yet been set + * up. + */ +void drm_kms_helper_poll_enable(struct drm_device *dev) +{ + bool poll = false; + struct drm_connector *connector; + + if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) + return; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT)) + poll = true; + } + + if (poll) + schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); +} +EXPORT_SYMBOL(drm_kms_helper_poll_enable); + +/** + * drm_kms_helper_poll_init - initialize and enable output polling + * @dev: drm_device + * + * This function intializes and then also enables output polling support for + * @dev. Drivers which do not have reliable hotplug support in hardware can use + * this helper infrastructure to regularly poll such connectors for changes in + * their connection state. + * + * Drivers can control which connectors are polled by setting the + * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On + * connectors where probing live outputs can result in visual distortion drivers + * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this. + * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are + * completely ignored by the polling logic. + * + * Note that a connector can be both polled and probed from the hotplug handler, + * in case the hotplug interrupt is known to be unreliable. + */ +void drm_kms_helper_poll_init(struct drm_device *dev) +{ + INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute); + dev->mode_config.poll_enabled = true; + + drm_kms_helper_poll_enable(dev); +} +EXPORT_SYMBOL(drm_kms_helper_poll_init); + +/** + * drm_kms_helper_poll_fini - disable output polling and clean it up + * @dev: drm_device + */ +void drm_kms_helper_poll_fini(struct drm_device *dev) +{ + drm_kms_helper_poll_disable(dev); +} +EXPORT_SYMBOL(drm_kms_helper_poll_fini); + +/** + * drm_helper_hpd_irq_event - hotplug processing + * @dev: drm_device + * + * Drivers can use this helper function to run a detect cycle on all connectors + * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All + * other connectors are ignored, which is useful to avoid reprobing fixed + * panels. + * + * This helper function is useful for drivers which can't or don't track hotplug + * interrupts for each connector. + * + * Drivers which support hotplug interrupts for each connector individually and + * which have a more fine-grained detect logic should bypass this code and + * directly call drm_kms_helper_hotplug_event() in case the connector state + * changed. + * + * This function must be called from process context with no mode + * setting locks held. + * + * Note that a connector can be both polled and probed from the hotplug handler, + * in case the hotplug interrupt is known to be unreliable. + */ +bool drm_helper_hpd_irq_event(struct drm_device *dev) +{ + struct drm_connector *connector; + enum drm_connector_status old_status; + bool changed = false; + + if (!dev->mode_config.poll_enabled) + return false; + + mutex_lock(&dev->mode_config.mutex); + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + + /* Only handle HPD capable connectors. */ + if (!(connector->polled & DRM_CONNECTOR_POLL_HPD)) + continue; + + old_status = connector->status; + + connector->status = connector->funcs->detect(connector, false); + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", + connector->base.id, + drm_get_connector_name(connector), + drm_get_connector_status_name(old_status), + drm_get_connector_status_name(connector->status)); + if (old_status != connector->status) + changed = true; + } + + mutex_unlock(&dev->mode_config.mutex); + + if (changed) + drm_kms_helper_hotplug_event(dev); + + return changed; +} +EXPORT_SYMBOL(drm_helper_hpd_irq_event); diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index 59827cc5e770..c786cd4f457b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -224,7 +224,7 @@ struct drm_gem_object *exynos_dmabuf_prime_import(struct drm_device *drm_dev, get_dma_buf(dma_buf); sgt = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL); - if (IS_ERR_OR_NULL(sgt)) { + if (IS_ERR(sgt)) { ret = PTR_ERR(sgt); goto err_buf_detach; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 4c5cf6843137..ce3e6a30deaa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -254,7 +254,6 @@ struct drm_exynos_file_private { * otherwise default one. * @da_space_size: size of device address space. * if 0 then default value is used for it. - * @da_space_order: order to device address space. */ struct exynos_drm_private { struct drm_fb_helper *fb_helper; @@ -272,7 +271,6 @@ struct exynos_drm_private { unsigned long da_start; unsigned long da_space_size; - unsigned long da_space_order; }; /* diff --git a/drivers/gpu/drm/exynos/exynos_drm_iommu.c b/drivers/gpu/drm/exynos/exynos_drm_iommu.c index fb8db0378274..b32b291f88ff 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_iommu.c +++ b/drivers/gpu/drm/exynos/exynos_drm_iommu.c @@ -36,12 +36,10 @@ int drm_create_iommu_mapping(struct drm_device *drm_dev) priv->da_start = EXYNOS_DEV_ADDR_START; if (!priv->da_space_size) priv->da_space_size = EXYNOS_DEV_ADDR_SIZE; - if (!priv->da_space_order) - priv->da_space_order = EXYNOS_DEV_ADDR_ORDER; mapping = arm_iommu_create_mapping(&platform_bus_type, priv->da_start, - priv->da_space_size, - priv->da_space_order); + priv->da_space_size); + if (IS_ERR(mapping)) return PTR_ERR(mapping); diff --git a/drivers/gpu/drm/exynos/exynos_drm_iommu.h b/drivers/gpu/drm/exynos/exynos_drm_iommu.h index 598e60f57d4b..72376d41c512 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_iommu.h +++ b/drivers/gpu/drm/exynos/exynos_drm_iommu.h @@ -14,7 +14,6 @@ #define EXYNOS_DEV_ADDR_START 0x20000000 #define EXYNOS_DEV_ADDR_SIZE 0x40000000 -#define EXYNOS_DEV_ADDR_ORDER 0x0 #ifdef CONFIG_DRM_EXYNOS_IOMMU diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 508cf99a292d..17f928ec84ea 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -10,7 +10,6 @@ config DRM_GMA500 # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI - select VIDEO_OUTPUT_CONTROL if ACPI select INPUT if ACPI help Say yes for an experimental 2D KMS framebuffer driver for the diff --git a/drivers/gpu/drm/gma500/mmu.c b/drivers/gpu/drm/gma500/mmu.c index 3e14a9b35252..0eaf11c19939 100644 --- a/drivers/gpu/drm/gma500/mmu.c +++ b/drivers/gpu/drm/gma500/mmu.c @@ -479,7 +479,7 @@ struct psb_mmu_driver *psb_mmu_driver_init(struct drm_device *dev, driver->has_clflush = 0; #if defined(CONFIG_X86) - if (boot_cpu_has(X86_FEATURE_CLFLSH)) { + if (boot_cpu_has(X86_FEATURE_CLFLUSH)) { uint32_t tfms, misc, cap0, cap4, clflush_size; /* diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig index 73ed59eff139..bea2d67196fb 100644 --- a/drivers/gpu/drm/i915/Kconfig +++ b/drivers/gpu/drm/i915/Kconfig @@ -14,7 +14,6 @@ config DRM_I915 # but for select to work, need to select ACPI_VIDEO's dependencies, ick select BACKLIGHT_LCD_SUPPORT if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI - select VIDEO_OUTPUT_CONTROL if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI select ACPI_BUTTON if ACPI diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0905cd915589..ec82f6bff122 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1308,6 +1308,7 @@ struct intel_vbt_data { struct { u16 pwm_freq_hz; + bool present; bool active_low_pwm; } backlight; @@ -2431,20 +2432,18 @@ int i915_gem_context_open(struct drm_device *dev, struct drm_file *file); int i915_gem_context_enable(struct drm_i915_private *dev_priv); void i915_gem_context_close(struct drm_device *dev, struct drm_file *file); int i915_switch_context(struct intel_ring_buffer *ring, - struct drm_file *file, struct i915_hw_context *to); + struct i915_hw_context *to); struct i915_hw_context * i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id); void i915_gem_context_free(struct kref *ctx_ref); static inline void i915_gem_context_reference(struct i915_hw_context *ctx) { - if (ctx->obj && HAS_HW_CONTEXTS(ctx->obj->base.dev)) - kref_get(&ctx->ref); + kref_get(&ctx->ref); } static inline void i915_gem_context_unreference(struct i915_hw_context *ctx) { - if (ctx->obj && HAS_HW_CONTEXTS(ctx->obj->base.dev)) - kref_put(&ctx->ref, i915_gem_context_free); + kref_put(&ctx->ref, i915_gem_context_free); } static inline bool i915_gem_context_is_default(const struct i915_hw_context *c) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6370a761d137..2871ce75f438 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2790,7 +2790,7 @@ int i915_gpu_idle(struct drm_device *dev) /* Flush everything onto the inactive list. */ for_each_ring(ring, dev_priv, i) { - ret = i915_switch_context(ring, NULL, ring->default_context); + ret = i915_switch_context(ring, ring->default_context); if (ret) return ret; diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 6043062ffce7..d72db15afa02 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -96,9 +96,6 @@ #define GEN6_CONTEXT_ALIGN (64<<10) #define GEN7_CONTEXT_ALIGN 4096 -static int do_switch(struct intel_ring_buffer *ring, - struct i915_hw_context *to); - static void do_ppgtt_cleanup(struct i915_hw_ppgtt *ppgtt) { struct drm_device *dev = ppgtt->base.dev; @@ -185,13 +182,15 @@ void i915_gem_context_free(struct kref *ctx_ref) typeof(*ctx), ref); struct i915_hw_ppgtt *ppgtt = NULL; - /* We refcount even the aliasing PPGTT to keep the code symmetric */ - if (USES_PPGTT(ctx->obj->base.dev)) - ppgtt = ctx_to_ppgtt(ctx); + if (ctx->obj) { + /* We refcount even the aliasing PPGTT to keep the code symmetric */ + if (USES_PPGTT(ctx->obj->base.dev)) + ppgtt = ctx_to_ppgtt(ctx); - /* XXX: Free up the object before tearing down the address space, in - * case we're bound in the PPGTT */ - drm_gem_object_unreference(&ctx->obj->base); + /* XXX: Free up the object before tearing down the address space, in + * case we're bound in the PPGTT */ + drm_gem_object_unreference(&ctx->obj->base); + } if (ppgtt) kref_put(&ppgtt->ref, ppgtt_release); @@ -232,32 +231,32 @@ __create_hw_context(struct drm_device *dev, return ERR_PTR(-ENOMEM); kref_init(&ctx->ref); - ctx->obj = i915_gem_alloc_object(dev, dev_priv->hw_context_size); - INIT_LIST_HEAD(&ctx->link); - if (ctx->obj == NULL) { - kfree(ctx); - DRM_DEBUG_DRIVER("Context object allocated failed\n"); - return ERR_PTR(-ENOMEM); - } + list_add_tail(&ctx->link, &dev_priv->context_list); - if (INTEL_INFO(dev)->gen >= 7) { - ret = i915_gem_object_set_cache_level(ctx->obj, - I915_CACHE_L3_LLC); - /* Failure shouldn't ever happen this early */ - if (WARN_ON(ret)) + if (dev_priv->hw_context_size) { + ctx->obj = i915_gem_alloc_object(dev, dev_priv->hw_context_size); + if (ctx->obj == NULL) { + ret = -ENOMEM; goto err_out; - } + } - list_add_tail(&ctx->link, &dev_priv->context_list); + if (INTEL_INFO(dev)->gen >= 7) { + ret = i915_gem_object_set_cache_level(ctx->obj, + I915_CACHE_L3_LLC); + /* Failure shouldn't ever happen this early */ + if (WARN_ON(ret)) + goto err_out; + } + } /* Default context will never have a file_priv */ - if (file_priv == NULL) - return ctx; - - ret = idr_alloc(&file_priv->context_idr, ctx, DEFAULT_CONTEXT_ID, 0, - GFP_KERNEL); - if (ret < 0) - goto err_out; + if (file_priv != NULL) { + ret = idr_alloc(&file_priv->context_idr, ctx, + DEFAULT_CONTEXT_ID, 0, GFP_KERNEL); + if (ret < 0) + goto err_out; + } else + ret = DEFAULT_CONTEXT_ID; ctx->file_priv = file_priv; ctx->id = ret; @@ -294,7 +293,7 @@ i915_gem_create_context(struct drm_device *dev, if (IS_ERR(ctx)) return ctx; - if (is_global_default_ctx) { + if (is_global_default_ctx && ctx->obj) { /* We may need to do things with the shrinker which * require us to immediately switch back to the default * context. This can cause a problem as pinning the @@ -342,7 +341,7 @@ i915_gem_create_context(struct drm_device *dev, return ctx; err_unpin: - if (is_global_default_ctx) + if (is_global_default_ctx && ctx->obj) i915_gem_object_ggtt_unpin(ctx->obj); err_destroy: i915_gem_context_unreference(ctx); @@ -352,32 +351,22 @@ err_destroy: void i915_gem_context_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_ring_buffer *ring; int i; - if (!HAS_HW_CONTEXTS(dev)) - return; - /* Prevent the hardware from restoring the last context (which hung) on * the next switch */ for (i = 0; i < I915_NUM_RINGS; i++) { - struct i915_hw_context *dctx; - if (!(INTEL_INFO(dev)->ring_mask & (1<<i))) - continue; + struct intel_ring_buffer *ring = &dev_priv->ring[i]; + struct i915_hw_context *dctx = ring->default_context; /* Do a fake switch to the default context */ - ring = &dev_priv->ring[i]; - dctx = ring->default_context; - if (WARN_ON(!dctx)) + if (ring->last_context == dctx) continue; if (!ring->last_context) continue; - if (ring->last_context == dctx) - continue; - - if (i == RCS) { + if (dctx->obj && i == RCS) { WARN_ON(i915_gem_obj_ggtt_pin(dctx->obj, get_context_alignment(dev), 0)); /* Fake a finish/inactive */ @@ -394,44 +383,35 @@ void i915_gem_context_reset(struct drm_device *dev) int i915_gem_context_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_ring_buffer *ring; + struct i915_hw_context *ctx; int i; - if (!HAS_HW_CONTEXTS(dev)) - return 0; - /* Init should only be called once per module load. Eventually the * restriction on the context_disabled check can be loosened. */ if (WARN_ON(dev_priv->ring[RCS].default_context)) return 0; - dev_priv->hw_context_size = round_up(get_context_size(dev), 4096); - - if (dev_priv->hw_context_size > (1<<20)) { - DRM_DEBUG_DRIVER("Disabling HW Contexts; invalid size\n"); - return -E2BIG; + if (HAS_HW_CONTEXTS(dev)) { + dev_priv->hw_context_size = round_up(get_context_size(dev), 4096); + if (dev_priv->hw_context_size > (1<<20)) { + DRM_DEBUG_DRIVER("Disabling HW Contexts; invalid size %d\n", + dev_priv->hw_context_size); + dev_priv->hw_context_size = 0; + } } - dev_priv->ring[RCS].default_context = - i915_gem_create_context(dev, NULL, USES_PPGTT(dev)); - - if (IS_ERR_OR_NULL(dev_priv->ring[RCS].default_context)) { - DRM_DEBUG_DRIVER("Disabling HW Contexts; create failed %ld\n", - PTR_ERR(dev_priv->ring[RCS].default_context)); - return PTR_ERR(dev_priv->ring[RCS].default_context); + ctx = i915_gem_create_context(dev, NULL, USES_PPGTT(dev)); + if (IS_ERR(ctx)) { + DRM_ERROR("Failed to create default global context (error %ld)\n", + PTR_ERR(ctx)); + return PTR_ERR(ctx); } - for (i = RCS + 1; i < I915_NUM_RINGS; i++) { - if (!(INTEL_INFO(dev)->ring_mask & (1<<i))) - continue; - - ring = &dev_priv->ring[i]; + /* NB: RCS will hold a ref for all rings */ + for (i = 0; i < I915_NUM_RINGS; i++) + dev_priv->ring[i].default_context = ctx; - /* NB: RCS will hold a ref for all rings */ - ring->default_context = dev_priv->ring[RCS].default_context; - } - - DRM_DEBUG_DRIVER("HW context support initialized\n"); + DRM_DEBUG_DRIVER("%s context support initialized\n", dev_priv->hw_context_size ? "HW" : "fake"); return 0; } @@ -441,33 +421,30 @@ void i915_gem_context_fini(struct drm_device *dev) struct i915_hw_context *dctx = dev_priv->ring[RCS].default_context; int i; - if (!HAS_HW_CONTEXTS(dev)) - return; - - /* The only known way to stop the gpu from accessing the hw context is - * to reset it. Do this as the very last operation to avoid confusing - * other code, leading to spurious errors. */ - intel_gpu_reset(dev); - - /* When default context is created and switched to, base object refcount - * will be 2 (+1 from object creation and +1 from do_switch()). - * i915_gem_context_fini() will be called after gpu_idle() has switched - * to default context. So we need to unreference the base object once - * to offset the do_switch part, so that i915_gem_context_unreference() - * can then free the base object correctly. */ - WARN_ON(!dev_priv->ring[RCS].last_context); - if (dev_priv->ring[RCS].last_context == dctx) { - /* Fake switch to NULL context */ - WARN_ON(dctx->obj->active); - i915_gem_object_ggtt_unpin(dctx->obj); - i915_gem_context_unreference(dctx); - dev_priv->ring[RCS].last_context = NULL; + if (dctx->obj) { + /* The only known way to stop the gpu from accessing the hw context is + * to reset it. Do this as the very last operation to avoid confusing + * other code, leading to spurious errors. */ + intel_gpu_reset(dev); + + /* When default context is created and switched to, base object refcount + * will be 2 (+1 from object creation and +1 from do_switch()). + * i915_gem_context_fini() will be called after gpu_idle() has switched + * to default context. So we need to unreference the base object once + * to offset the do_switch part, so that i915_gem_context_unreference() + * can then free the base object correctly. */ + WARN_ON(!dev_priv->ring[RCS].last_context); + if (dev_priv->ring[RCS].last_context == dctx) { + /* Fake switch to NULL context */ + WARN_ON(dctx->obj->active); + i915_gem_object_ggtt_unpin(dctx->obj); + i915_gem_context_unreference(dctx); + dev_priv->ring[RCS].last_context = NULL; + } } for (i = 0; i < I915_NUM_RINGS; i++) { struct intel_ring_buffer *ring = &dev_priv->ring[i]; - if (!(INTEL_INFO(dev)->ring_mask & (1<<i))) - continue; if (ring->last_context) i915_gem_context_unreference(ring->last_context); @@ -478,7 +455,6 @@ void i915_gem_context_fini(struct drm_device *dev) i915_gem_object_ggtt_unpin(dctx->obj); i915_gem_context_unreference(dctx); - dev_priv->mm.aliasing_ppgtt = NULL; } int i915_gem_context_enable(struct drm_i915_private *dev_priv) @@ -486,9 +462,6 @@ int i915_gem_context_enable(struct drm_i915_private *dev_priv) struct intel_ring_buffer *ring; int ret, i; - if (!HAS_HW_CONTEXTS(dev_priv->dev)) - return 0; - /* This is the only place the aliasing PPGTT gets enabled, which means * it has to happen before we bail on reset */ if (dev_priv->mm.aliasing_ppgtt) { @@ -503,7 +476,7 @@ int i915_gem_context_enable(struct drm_i915_private *dev_priv) BUG_ON(!dev_priv->ring[RCS].default_context); for_each_ring(ring, dev_priv, i) { - ret = do_switch(ring, ring->default_context); + ret = i915_switch_context(ring, ring->default_context); if (ret) return ret; } @@ -526,19 +499,6 @@ static int context_idr_cleanup(int id, void *p, void *data) int i915_gem_context_open(struct drm_device *dev, struct drm_file *file) { struct drm_i915_file_private *file_priv = file->driver_priv; - struct drm_i915_private *dev_priv = dev->dev_private; - - if (!HAS_HW_CONTEXTS(dev)) { - /* Cheat for hang stats */ - file_priv->private_default_ctx = - kzalloc(sizeof(struct i915_hw_context), GFP_KERNEL); - - if (file_priv->private_default_ctx == NULL) - return -ENOMEM; - - file_priv->private_default_ctx->vm = &dev_priv->gtt.base; - return 0; - } idr_init(&file_priv->context_idr); @@ -559,14 +519,10 @@ void i915_gem_context_close(struct drm_device *dev, struct drm_file *file) { struct drm_i915_file_private *file_priv = file->driver_priv; - if (!HAS_HW_CONTEXTS(dev)) { - kfree(file_priv->private_default_ctx); - return; - } - idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL); - i915_gem_context_unreference(file_priv->private_default_ctx); idr_destroy(&file_priv->context_idr); + + i915_gem_context_unreference(file_priv->private_default_ctx); } struct i915_hw_context * @@ -574,9 +530,6 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id) { struct i915_hw_context *ctx; - if (!HAS_HW_CONTEXTS(file_priv->dev_priv->dev)) - return file_priv->private_default_ctx; - ctx = (struct i915_hw_context *)idr_find(&file_priv->context_idr, id); if (!ctx) return ERR_PTR(-ENOENT); @@ -758,7 +711,6 @@ unpin_out: /** * i915_switch_context() - perform a GPU context switch. * @ring: ring for which we'll execute the context switch - * @file_priv: file_priv associated with the context, may be NULL * @to: the context to switch to * * The context life cycle is simple. The context refcount is incremented and @@ -767,24 +719,30 @@ unpin_out: * object while letting the normal object tracking destroy the backing BO. */ int i915_switch_context(struct intel_ring_buffer *ring, - struct drm_file *file, struct i915_hw_context *to) { struct drm_i915_private *dev_priv = ring->dev->dev_private; WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); - BUG_ON(file && to == NULL); - - /* We have the fake context */ - if (!HAS_HW_CONTEXTS(ring->dev)) { - ring->last_context = to; + if (to->obj == NULL) { /* We have the fake context */ + if (to != ring->last_context) { + i915_gem_context_reference(to); + if (ring->last_context) + i915_gem_context_unreference(ring->last_context); + ring->last_context = to; + } return 0; } return do_switch(ring, to); } +static bool hw_context_enabled(struct drm_device *dev) +{ + return to_i915(dev)->hw_context_size; +} + int i915_gem_context_create_ioctl(struct drm_device *dev, void *data, struct drm_file *file) { @@ -793,7 +751,7 @@ int i915_gem_context_create_ioctl(struct drm_device *dev, void *data, struct i915_hw_context *ctx; int ret; - if (!HAS_HW_CONTEXTS(dev)) + if (!hw_context_enabled(dev)) return -ENODEV; ret = i915_mutex_lock_interruptible(dev); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7447160155a3..2c9d9cbaf653 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1221,7 +1221,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, if (ret) goto err; - ret = i915_switch_context(ring, file, ctx); + ret = i915_switch_context(ring, ctx); if (ret) goto err; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4867f4cc0938..fa486c5fbb02 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -287,6 +287,9 @@ parse_lfp_backlight(struct drm_i915_private *dev_priv, struct bdb_header *bdb) const struct bdb_lfp_backlight_data *backlight_data; const struct bdb_lfp_backlight_data_entry *entry; + /* Err to enabling backlight if no backlight block. */ + dev_priv->vbt.backlight.present = true; + backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT); if (!backlight_data) return; @@ -299,6 +302,13 @@ parse_lfp_backlight(struct drm_i915_private *dev_priv, struct bdb_header *bdb) entry = &backlight_data->data[panel_type]; + dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM; + if (!dev_priv->vbt.backlight.present) { + DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n", + entry->type); + return; + } + dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, " diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 83b7629e4367..f27f7b282465 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -374,6 +374,9 @@ struct bdb_lvds_lfp_data { struct bdb_lvds_lfp_data_entry data[16]; } __packed; +#define BDB_BACKLIGHT_TYPE_NONE 0 +#define BDB_BACKLIGHT_TYPE_PWM 2 + struct bdb_lfp_backlight_data_entry { u8 type:2; u8 active_low_pwm:1; diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index cb058408c70e..0eead16aeda7 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -1065,6 +1065,11 @@ int intel_panel_setup_backlight(struct drm_connector *connector) unsigned long flags; int ret; + if (!dev_priv->vbt.backlight.present) { + DRM_DEBUG_KMS("native backlight control not available per VBT\n"); + return 0; + } + /* set level and max in panel struct */ spin_lock_irqsave(&dev_priv->backlight_lock, flags); ret = dev_priv->display.setup_backlight(intel_connector); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 5874716774a7..19e94c3edc19 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -1545,6 +1545,16 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc) DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); + if (IS_I915GM(dev) && enabled) { + struct intel_framebuffer *fb; + + fb = to_intel_framebuffer(enabled->primary->fb); + + /* self-refresh seems busted with untiled */ + if (fb->obj->tiling_mode == I915_TILING_NONE) + enabled = NULL; + } + /* * Overlay gets an aggressive default since video jitter is bad. */ diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig index c69d1e07a3a6..b6984971ce0c 100644 --- a/drivers/gpu/drm/msm/Kconfig +++ b/drivers/gpu/drm/msm/Kconfig @@ -3,7 +3,7 @@ config DRM_MSM tristate "MSM DRM" depends on DRM depends on MSM_IOMMU - depends on (ARCH_MSM && ARCH_MSM8960) || (ARM && COMPILE_TEST) + depends on ARCH_MSM8960 || (ARM && COMPILE_TEST) select DRM_KMS_HELPER select SHMEM select TMPFS diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index 7cf787d697b1..637c29a33127 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -11,7 +11,7 @@ config DRM_NOUVEAU select FB select FRAMEBUFFER_CONSOLE if !EXPERT select FB_BACKLIGHT if DRM_NOUVEAU_BACKLIGHT - select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT + select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && INPUT select X86_PLATFORM_DEVICES if ACPI && X86 select ACPI_WMI if ACPI && X86 select MXM_WMI if ACPI && X86 @@ -19,7 +19,6 @@ config DRM_NOUVEAU # Similar to i915, we need to select ACPI_VIDEO and it's dependencies select BACKLIGHT_LCD_SUPPORT if ACPI && X86 select BACKLIGHT_CLASS_DEVICE if ACPI && X86 - select VIDEO_OUTPUT_CONTROL if ACPI && X86 select INPUT if ACPI && X86 select THERMAL if ACPI && X86 select ACPI_VIDEO if ACPI && X86 diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c index e9df94f96d78..fb0b6b2d1427 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c @@ -109,7 +109,7 @@ nouveau_bios_shadow_pramin(struct nouveau_bios *bios) return; } - addr = (u64)(addr >> 8) << 8; + addr = (addr & 0xffffff00) << 8; if (!addr) { addr = (u64)nv_rd32(bios, 0x001700) << 16; addr += 0xf0000; diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c index 912759daf562..86f4ead0441d 100644 --- a/drivers/gpu/drm/omapdrm/omap_connector.c +++ b/drivers/gpu/drm/omapdrm/omap_connector.c @@ -37,7 +37,7 @@ struct omap_connector { void copy_timings_omap_to_drm(struct drm_display_mode *mode, struct omap_video_timings *timings) { - mode->clock = timings->pixel_clock; + mode->clock = timings->pixelclock / 1000; mode->hdisplay = timings->x_res; mode->hsync_start = mode->hdisplay + timings->hfp; @@ -68,7 +68,7 @@ void copy_timings_omap_to_drm(struct drm_display_mode *mode, void copy_timings_drm_to_omap(struct omap_video_timings *timings, struct drm_display_mode *mode) { - timings->pixel_clock = mode->clock; + timings->pixelclock = mode->clock * 1000; timings->x_res = mode->hdisplay; timings->hfp = mode->hsync_start - mode->hdisplay; @@ -220,7 +220,7 @@ static int omap_connector_mode_valid(struct drm_connector *connector, if (!r) { /* check if vrefresh is still valid */ new_mode = drm_mode_duplicate(dev, mode); - new_mode->clock = timings.pixel_clock; + new_mode->clock = timings.pixelclock / 1000; new_mode->vrefresh = 0; if (mode->vrefresh == drm_mode_vrefresh(new_mode)) ret = MODE_OK; diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c index 355157e4f78d..e3c47a8005ff 100644 --- a/drivers/gpu/drm/omapdrm/omap_crtc.c +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c @@ -33,6 +33,7 @@ struct omap_crtc { int pipe; enum omap_channel channel; struct omap_overlay_manager_info info; + struct drm_encoder *current_encoder; /* * Temporary: eventually this will go away, but it is needed @@ -120,13 +121,25 @@ static void omap_crtc_start_update(struct omap_overlay_manager *mgr) { } +static void set_enabled(struct drm_crtc *crtc, bool enable); + static int omap_crtc_enable(struct omap_overlay_manager *mgr) { + struct omap_crtc *omap_crtc = omap_crtcs[mgr->id]; + + dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info); + dispc_mgr_set_timings(omap_crtc->channel, + &omap_crtc->timings); + set_enabled(&omap_crtc->base, true); + return 0; } static void omap_crtc_disable(struct omap_overlay_manager *mgr) { + struct omap_crtc *omap_crtc = omap_crtcs[mgr->id]; + + set_enabled(&omap_crtc->base, false); } static void omap_crtc_set_timings(struct omap_overlay_manager *mgr, @@ -184,7 +197,6 @@ static void omap_crtc_destroy(struct drm_crtc *crtc) WARN_ON(omap_crtc->apply_irq.registered); omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); - omap_crtc->plane->funcs->destroy(omap_crtc->plane); drm_crtc_cleanup(crtc); kfree(omap_crtc); @@ -338,17 +350,23 @@ static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, struct omap_crtc *omap_crtc = to_omap_crtc(crtc); struct drm_plane *primary = crtc->primary; struct drm_gem_object *bo; + unsigned long flags; DBG("%d -> %d (event=%p)", primary->fb ? primary->fb->base.id : -1, fb->base.id, event); + spin_lock_irqsave(&dev->event_lock, flags); + if (omap_crtc->old_fb) { + spin_unlock_irqrestore(&dev->event_lock, flags); dev_err(dev->dev, "already a pending flip\n"); return -EINVAL; } omap_crtc->event = event; - primary->fb = fb; + omap_crtc->old_fb = primary->fb = fb; + + spin_unlock_irqrestore(&dev->event_lock, flags); /* * Hold a reference temporarily until the crtc is updated @@ -528,38 +546,46 @@ static void set_enabled(struct drm_crtc *crtc, bool enable) struct drm_device *dev = crtc->dev; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); enum omap_channel channel = omap_crtc->channel; - struct omap_irq_wait *wait = NULL; + struct omap_irq_wait *wait; + u32 framedone_irq, vsync_irq; + int ret; if (dispc_mgr_is_enabled(channel) == enable) return; - /* ignore sync-lost irqs during enable/disable */ + /* + * Digit output produces some sync lost interrupts during the first + * frame when enabling, so we need to ignore those. + */ omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); - if (dispc_mgr_get_framedone_irq(channel)) { - if (!enable) { - wait = omap_irq_wait_init(dev, - dispc_mgr_get_framedone_irq(channel), 1); - } + framedone_irq = dispc_mgr_get_framedone_irq(channel); + vsync_irq = dispc_mgr_get_vsync_irq(channel); + + if (enable) { + wait = omap_irq_wait_init(dev, vsync_irq, 1); } else { /* - * When we disable digit output, we need to wait until fields - * are done. Otherwise the DSS is still working, and turning - * off the clocks prevents DSS from going to OFF mode. And when - * enabling, we need to wait for the extra sync losts + * When we disable the digit output, we need to wait for + * FRAMEDONE to know that DISPC has finished with the output. + * + * OMAP2/3 does not have FRAMEDONE irq for digit output, and in + * that case we need to use vsync interrupt, and wait for both + * even and odd frames. */ - wait = omap_irq_wait_init(dev, - dispc_mgr_get_vsync_irq(channel), 2); + + if (framedone_irq) + wait = omap_irq_wait_init(dev, framedone_irq, 1); + else + wait = omap_irq_wait_init(dev, vsync_irq, 2); } dispc_mgr_enable(channel, enable); - if (wait) { - int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); - if (ret) { - dev_err(dev->dev, "%s: timeout waiting for %s\n", - omap_crtc->name, enable ? "enable" : "disable"); - } + ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); + if (ret) { + dev_err(dev->dev, "%s: timeout waiting for %s\n", + omap_crtc->name, enable ? "enable" : "disable"); } omap_irq_register(crtc->dev, &omap_crtc->error_irq); @@ -586,8 +612,12 @@ static void omap_crtc_pre_apply(struct omap_drm_apply *apply) } } + if (omap_crtc->current_encoder && encoder != omap_crtc->current_encoder) + omap_encoder_set_enabled(omap_crtc->current_encoder, false); + + omap_crtc->current_encoder = encoder; + if (!omap_crtc->enabled) { - set_enabled(&omap_crtc->base, false); if (encoder) omap_encoder_set_enabled(encoder, false); } else { @@ -596,13 +626,7 @@ static void omap_crtc_pre_apply(struct omap_drm_apply *apply) omap_encoder_update(encoder, omap_crtc->mgr, &omap_crtc->timings); omap_encoder_set_enabled(encoder, true); - omap_crtc->full_update = false; } - - dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info); - dispc_mgr_set_timings(omap_crtc->channel, - &omap_crtc->timings); - set_enabled(&omap_crtc->base, true); } omap_crtc->full_update = false; @@ -613,10 +637,30 @@ static void omap_crtc_post_apply(struct omap_drm_apply *apply) /* nothing needed for post-apply */ } +void omap_crtc_flush(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + int loops = 0; + + while (!list_empty(&omap_crtc->pending_applies) || + !list_empty(&omap_crtc->queued_applies) || + omap_crtc->event || omap_crtc->old_fb) { + + if (++loops > 10) { + dev_err(crtc->dev->dev, + "omap_crtc_flush() timeout\n"); + break; + } + + schedule_timeout_uninterruptible(msecs_to_jiffies(20)); + } +} + static const char *channel_names[] = { [OMAP_DSS_CHANNEL_LCD] = "lcd", [OMAP_DSS_CHANNEL_DIGIT] = "tv", [OMAP_DSS_CHANNEL_LCD2] = "lcd2", + [OMAP_DSS_CHANNEL_LCD3] = "lcd3", }; void omap_crtc_pre_init(void) diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index bf39fcc49e0f..c8270e4b26f3 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -513,12 +513,18 @@ static int dev_load(struct drm_device *dev, unsigned long flags) static int dev_unload(struct drm_device *dev) { struct omap_drm_private *priv = dev->dev_private; + int i; DBG("unload: dev=%p", dev); drm_kms_helper_poll_fini(dev); omap_fbdev_free(dev); + + /* flush crtcs so the fbs get released */ + for (i = 0; i < priv->num_crtcs; i++) + omap_crtc_flush(priv->crtcs[i]); + omap_modeset_free(dev); omap_gem_deinit(dev); @@ -696,10 +702,11 @@ static int pdev_remove(struct platform_device *device) { DBG(""); + drm_put_dev(platform_get_drvdata(device)); + omap_disconnect_dssdevs(); omap_crtc_pre_uninit(); - drm_put_dev(platform_get_drvdata(device)); return 0; } @@ -726,18 +733,33 @@ static struct platform_driver pdev = { static int __init omap_drm_init(void) { + int r; + DBG("init"); - if (platform_driver_register(&omap_dmm_driver)) { - /* we can continue on without DMM.. so not fatal */ - dev_err(NULL, "DMM registration failed\n"); + + r = platform_driver_register(&omap_dmm_driver); + if (r) { + pr_err("DMM driver registration failed\n"); + return r; + } + + r = platform_driver_register(&pdev); + if (r) { + pr_err("omapdrm driver registration failed\n"); + platform_driver_unregister(&omap_dmm_driver); + return r; } - return platform_driver_register(&pdev); + + return 0; } static void __exit omap_drm_fini(void) { DBG("fini"); + platform_driver_unregister(&pdev); + + platform_driver_unregister(&omap_dmm_driver); } /* need late_initcall() so we load after dss_driver's are loaded */ diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h index 428b2981fd68..284b80fc3c54 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.h +++ b/drivers/gpu/drm/omapdrm/omap_drv.h @@ -163,6 +163,7 @@ void omap_crtc_pre_init(void); void omap_crtc_pre_uninit(void); struct drm_crtc *omap_crtc_init(struct drm_device *dev, struct drm_plane *plane, enum omap_channel channel, int id); +void omap_crtc_flush(struct drm_crtc *crtc); struct drm_plane *omap_plane_init(struct drm_device *dev, int plane_id, bool private_plane); diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c index d2b8c49bfb4a..8b019602ffe6 100644 --- a/drivers/gpu/drm/omapdrm/omap_fb.c +++ b/drivers/gpu/drm/omapdrm/omap_fb.c @@ -218,6 +218,20 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, info->rotation_type = OMAP_DSS_ROT_TILER; info->screen_width = omap_gem_tiled_stride(plane->bo, orient); } else { + switch (win->rotation & 0xf) { + case 0: + case BIT(DRM_ROTATE_0): + /* OK */ + break; + + default: + dev_warn(fb->dev->dev, + "rotation '%d' ignored for non-tiled fb\n", + win->rotation); + win->rotation = 0; + break; + } + info->paddr = get_linear_addr(plane, format, 0, x, y); info->rotation_type = OMAP_DSS_ROT_DMA; info->screen_width = plane->pitch; diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c index 002988d09021..1388ca7f87e8 100644 --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c @@ -371,6 +371,9 @@ void omap_fbdev_free(struct drm_device *dev) fbdev = to_omap_fbdev(priv->fbdev); + /* release the ref taken in omap_fbdev_create() */ + omap_gem_put_paddr(fbdev->bo); + /* this will free the backing object */ if (fbdev->fb) { drm_framebuffer_unregister_private(fbdev->fb); diff --git a/drivers/gpu/drm/omapdrm/omap_gem.c b/drivers/gpu/drm/omapdrm/omap_gem.c index c8d972763889..95dbce286a41 100644 --- a/drivers/gpu/drm/omapdrm/omap_gem.c +++ b/drivers/gpu/drm/omapdrm/omap_gem.c @@ -980,12 +980,9 @@ int omap_gem_resume(struct device *dev) #ifdef CONFIG_DEBUG_FS void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m) { - struct drm_device *dev = obj->dev; struct omap_gem_object *omap_obj = to_omap_bo(obj); uint64_t off; - WARN_ON(!mutex_is_locked(&dev->struct_mutex)); - off = drm_vma_node_start(&obj->vma_node); seq_printf(m, "%08x: %2d (%2d) %08llx %08Zx (%2d) %p %4d", @@ -1050,10 +1047,10 @@ static inline bool is_waiting(struct omap_gem_sync_waiter *waiter) { struct omap_gem_object *omap_obj = waiter->omap_obj; if ((waiter->op & OMAP_GEM_READ) && - (omap_obj->sync->read_complete < waiter->read_target)) + (omap_obj->sync->write_complete < waiter->write_target)) return true; if ((waiter->op & OMAP_GEM_WRITE) && - (omap_obj->sync->write_complete < waiter->write_target)) + (omap_obj->sync->read_complete < waiter->read_target)) return true; return false; } @@ -1229,6 +1226,8 @@ int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op, } spin_unlock(&sync_lock); + + kfree(waiter); } /* no waiting.. */ diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c index 046d5e660c04..3cf31ee59aac 100644 --- a/drivers/gpu/drm/omapdrm/omap_plane.c +++ b/drivers/gpu/drm/omapdrm/omap_plane.c @@ -225,6 +225,11 @@ int omap_plane_mode_set(struct drm_plane *plane, omap_plane->apply_done_cb.arg = arg; } + if (plane->fb) + drm_framebuffer_unreference(plane->fb); + + drm_framebuffer_reference(fb); + plane->fb = fb; plane->crtc = crtc; @@ -241,10 +246,13 @@ static int omap_plane_update(struct drm_plane *plane, struct omap_plane *omap_plane = to_omap_plane(plane); omap_plane->enabled = true; - if (plane->fb) - drm_framebuffer_unreference(plane->fb); - - drm_framebuffer_reference(fb); + /* omap_plane_mode_set() takes adjusted src */ + switch (omap_plane->win.rotation & 0xf) { + case BIT(DRM_ROTATE_90): + case BIT(DRM_ROTATE_270): + swap(src_w, src_h); + break; + } return omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c index cad89a977527..10dae4106c08 100644 --- a/drivers/gpu/drm/radeon/ci_dpm.c +++ b/drivers/gpu/drm/radeon/ci_dpm.c @@ -21,8 +21,10 @@ * */ +#include <linux/firmware.h> #include "drmP.h" #include "radeon.h" +#include "radeon_ucode.h" #include "cikd.h" #include "r600_dpm.h" #include "ci_dpm.h" @@ -202,24 +204,29 @@ static void ci_initialize_powertune_defaults(struct radeon_device *rdev) struct ci_power_info *pi = ci_get_pi(rdev); switch (rdev->pdev->device) { + case 0x6649: case 0x6650: + case 0x6651: case 0x6658: case 0x665C: + case 0x665D: default: pi->powertune_defaults = &defaults_bonaire_xt; break; - case 0x6651: - case 0x665D: - pi->powertune_defaults = &defaults_bonaire_pro; - break; case 0x6640: - pi->powertune_defaults = &defaults_saturn_xt; - break; case 0x6641: - pi->powertune_defaults = &defaults_saturn_pro; + case 0x6646: + case 0x6647: + pi->powertune_defaults = &defaults_saturn_xt; break; case 0x67B8: case 0x67B0: + pi->powertune_defaults = &defaults_hawaii_xt; + break; + case 0x67BA: + case 0x67B1: + pi->powertune_defaults = &defaults_hawaii_pro; + break; case 0x67A0: case 0x67A1: case 0x67A2: @@ -228,11 +235,7 @@ static void ci_initialize_powertune_defaults(struct radeon_device *rdev) case 0x67AA: case 0x67B9: case 0x67BE: - pi->powertune_defaults = &defaults_hawaii_xt; - break; - case 0x67BA: - case 0x67B1: - pi->powertune_defaults = &defaults_hawaii_pro; + pi->powertune_defaults = &defaults_bonaire_xt; break; } @@ -5146,6 +5149,12 @@ int ci_dpm_init(struct radeon_device *rdev) pi->mclk_dpm_key_disabled = 0; pi->pcie_dpm_key_disabled = 0; + /* mclk dpm is unstable on some R7 260X cards with the old mc ucode */ + if ((rdev->pdev->device == 0x6658) && + (rdev->mc_fw->size == (BONAIRE_MC_UCODE_SIZE * 4))) { + pi->mclk_dpm_key_disabled = 1; + } + pi->caps_sclk_ds = true; pi->mclk_strobe_mode_threshold = 40000; diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index 745143c2358f..199eb194716f 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -38,6 +38,7 @@ MODULE_FIRMWARE("radeon/BONAIRE_me.bin"); MODULE_FIRMWARE("radeon/BONAIRE_ce.bin"); MODULE_FIRMWARE("radeon/BONAIRE_mec.bin"); MODULE_FIRMWARE("radeon/BONAIRE_mc.bin"); +MODULE_FIRMWARE("radeon/BONAIRE_mc2.bin"); MODULE_FIRMWARE("radeon/BONAIRE_rlc.bin"); MODULE_FIRMWARE("radeon/BONAIRE_sdma.bin"); MODULE_FIRMWARE("radeon/BONAIRE_smc.bin"); @@ -46,6 +47,7 @@ MODULE_FIRMWARE("radeon/HAWAII_me.bin"); MODULE_FIRMWARE("radeon/HAWAII_ce.bin"); MODULE_FIRMWARE("radeon/HAWAII_mec.bin"); MODULE_FIRMWARE("radeon/HAWAII_mc.bin"); +MODULE_FIRMWARE("radeon/HAWAII_mc2.bin"); MODULE_FIRMWARE("radeon/HAWAII_rlc.bin"); MODULE_FIRMWARE("radeon/HAWAII_sdma.bin"); MODULE_FIRMWARE("radeon/HAWAII_smc.bin"); @@ -1703,20 +1705,20 @@ int ci_mc_load_microcode(struct radeon_device *rdev) const __be32 *fw_data; u32 running, blackout = 0; u32 *io_mc_regs; - int i, ucode_size, regs_size; + int i, regs_size, ucode_size; if (!rdev->mc_fw) return -EINVAL; + ucode_size = rdev->mc_fw->size / 4; + switch (rdev->family) { case CHIP_BONAIRE: io_mc_regs = (u32 *)&bonaire_io_mc_regs; - ucode_size = CIK_MC_UCODE_SIZE; regs_size = BONAIRE_IO_MC_REGS_SIZE; break; case CHIP_HAWAII: io_mc_regs = (u32 *)&hawaii_io_mc_regs; - ucode_size = HAWAII_MC_UCODE_SIZE; regs_size = HAWAII_IO_MC_REGS_SIZE; break; default: @@ -1783,7 +1785,7 @@ static int cik_init_microcode(struct radeon_device *rdev) const char *chip_name; size_t pfp_req_size, me_req_size, ce_req_size, mec_req_size, rlc_req_size, mc_req_size = 0, - sdma_req_size, smc_req_size = 0; + sdma_req_size, smc_req_size = 0, mc2_req_size = 0; char fw_name[30]; int err; @@ -1797,7 +1799,8 @@ static int cik_init_microcode(struct radeon_device *rdev) ce_req_size = CIK_CE_UCODE_SIZE * 4; mec_req_size = CIK_MEC_UCODE_SIZE * 4; rlc_req_size = BONAIRE_RLC_UCODE_SIZE * 4; - mc_req_size = CIK_MC_UCODE_SIZE * 4; + mc_req_size = BONAIRE_MC_UCODE_SIZE * 4; + mc2_req_size = BONAIRE_MC2_UCODE_SIZE * 4; sdma_req_size = CIK_SDMA_UCODE_SIZE * 4; smc_req_size = ALIGN(BONAIRE_SMC_UCODE_SIZE, 4); break; @@ -1809,6 +1812,7 @@ static int cik_init_microcode(struct radeon_device *rdev) mec_req_size = CIK_MEC_UCODE_SIZE * 4; rlc_req_size = BONAIRE_RLC_UCODE_SIZE * 4; mc_req_size = HAWAII_MC_UCODE_SIZE * 4; + mc2_req_size = HAWAII_MC2_UCODE_SIZE * 4; sdma_req_size = CIK_SDMA_UCODE_SIZE * 4; smc_req_size = ALIGN(HAWAII_SMC_UCODE_SIZE, 4); break; @@ -1904,16 +1908,22 @@ static int cik_init_microcode(struct radeon_device *rdev) /* No SMC, MC ucode on APUs */ if (!(rdev->flags & RADEON_IS_IGP)) { - snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name); + snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc2.bin", chip_name); err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev); - if (err) - goto out; - if (rdev->mc_fw->size != mc_req_size) { + if (err) { + snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name); + err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev); + if (err) + goto out; + } + if ((rdev->mc_fw->size != mc_req_size) && + (rdev->mc_fw->size != mc2_req_size)){ printk(KERN_ERR "cik_mc: Bogus length %zu in firmware \"%s\"\n", rdev->mc_fw->size, fw_name); err = -EINVAL; } + DRM_INFO("%s: %zu bytes\n", fw_name, rdev->mc_fw->size); snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name); err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 05b08e16e1f5..b58e1afdda76 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -2321,6 +2321,7 @@ struct radeon_device { bool have_disp_power_ref; }; +bool radeon_is_px(struct drm_device *dev); int radeon_device_init(struct radeon_device *rdev, struct drm_device *ddev, struct pci_dev *pdev, diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index fa9a9c02751e..dedea72f48c4 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -59,7 +59,7 @@ struct atpx_mux { u16 mux; } __packed; -bool radeon_is_px(void) { +bool radeon_has_atpx(void) { return radeon_atpx_priv.atpx_detected; } diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 835516d2d257..511fe26198e4 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -102,11 +102,14 @@ static const char radeon_family_name[][16] = { "LAST", }; -#if defined(CONFIG_VGA_SWITCHEROO) -bool radeon_is_px(void); -#else -static inline bool radeon_is_px(void) { return false; } -#endif +bool radeon_is_px(struct drm_device *dev) +{ + struct radeon_device *rdev = dev->dev_private; + + if (rdev->flags & RADEON_IS_PX) + return true; + return false; +} /** * radeon_program_register_sequence - program an array of registers. @@ -1082,7 +1085,7 @@ static void radeon_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero { struct drm_device *dev = pci_get_drvdata(pdev); - if (radeon_is_px() && state == VGA_SWITCHEROO_OFF) + if (radeon_is_px(dev) && state == VGA_SWITCHEROO_OFF) return; if (state == VGA_SWITCHEROO_ON) { @@ -1301,9 +1304,7 @@ int radeon_device_init(struct radeon_device *rdev, * ignore it */ vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode); - if (radeon_runtime_pm == 1) - runtime = true; - if ((radeon_runtime_pm == -1) && radeon_is_px()) + if (rdev->flags & RADEON_IS_PX) runtime = true; vga_switcheroo_register_client(rdev->pdev, &radeon_switcheroo_ops, runtime); if (runtime) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 776e03d6ac81..2f7cbb901fb1 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -864,7 +864,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, unsigned post_div_min, post_div_max, post_div; unsigned ref_div_min, ref_div_max, ref_div; unsigned post_div_best, diff_best; - unsigned nom, den, tmp; + unsigned nom, den; /* determine allowed feedback divider range */ fb_div_min = pll->min_feedback_div; @@ -936,23 +936,27 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll, } post_div = post_div_best; + /* limit reference * post divider to a maximum */ + ref_div_max = min(210 / post_div, ref_div_max); + /* get matching reference and feedback divider */ - ref_div = max(den / post_div, 1u); - fb_div = nom; + ref_div = max(DIV_ROUND_CLOSEST(den, post_div), 1u); + fb_div = DIV_ROUND_CLOSEST(nom * ref_div * post_div, den); /* we're almost done, but reference and feedback divider might be to large now */ - tmp = ref_div; + nom = fb_div; + den = ref_div; if (fb_div > fb_div_max) { - ref_div = ref_div * fb_div_max / fb_div; + ref_div = DIV_ROUND_CLOSEST(den * fb_div_max, nom); fb_div = fb_div_max; } if (ref_div > ref_div_max) { ref_div = ref_div_max; - fb_div = nom * ref_div_max / tmp; + fb_div = DIV_ROUND_CLOSEST(nom * ref_div_max, den); } /* reduce the numbers to a simpler ratio once more */ diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index cf2721a91249..c00a2f585185 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -115,6 +115,7 @@ extern int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int flags, int *vpos, int *hpos, ktime_t *stime, ktime_t *etime); +extern bool radeon_is_px(struct drm_device *dev); extern const struct drm_ioctl_desc radeon_ioctls_kms[]; extern int radeon_max_kms_ioctl; int radeon_mmap(struct file *filp, struct vm_area_struct *vma); @@ -144,11 +145,9 @@ void radeon_debugfs_cleanup(struct drm_minor *minor); #if defined(CONFIG_VGA_SWITCHEROO) void radeon_register_atpx_handler(void); void radeon_unregister_atpx_handler(void); -bool radeon_is_px(void); #else static inline void radeon_register_atpx_handler(void) {} static inline void radeon_unregister_atpx_handler(void) {} -static inline bool radeon_is_px(void) { return false; } #endif int radeon_no_wb; @@ -405,12 +404,7 @@ static int radeon_pmops_runtime_suspend(struct device *dev) struct drm_device *drm_dev = pci_get_drvdata(pdev); int ret; - if (radeon_runtime_pm == 0) { - pm_runtime_forbid(dev); - return -EBUSY; - } - - if (radeon_runtime_pm == -1 && !radeon_is_px()) { + if (!radeon_is_px(drm_dev)) { pm_runtime_forbid(dev); return -EBUSY; } @@ -434,10 +428,7 @@ static int radeon_pmops_runtime_resume(struct device *dev) struct drm_device *drm_dev = pci_get_drvdata(pdev); int ret; - if (radeon_runtime_pm == 0) - return -EINVAL; - - if (radeon_runtime_pm == -1 && !radeon_is_px()) + if (!radeon_is_px(drm_dev)) return -EINVAL; drm_dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; @@ -462,14 +453,7 @@ static int radeon_pmops_runtime_idle(struct device *dev) struct drm_device *drm_dev = pci_get_drvdata(pdev); struct drm_crtc *crtc; - if (radeon_runtime_pm == 0) { - pm_runtime_forbid(dev); - return -EBUSY; - } - - /* are we PX enabled? */ - if (radeon_runtime_pm == -1 && !radeon_is_px()) { - DRM_DEBUG_DRIVER("failing to power off - not px\n"); + if (!radeon_is_px(drm_dev)) { pm_runtime_forbid(dev); return -EBUSY; } diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h index 614ad549297f..9da5da4ffd17 100644 --- a/drivers/gpu/drm/radeon/radeon_family.h +++ b/drivers/gpu/drm/radeon/radeon_family.h @@ -115,6 +115,7 @@ enum radeon_chip_flags { RADEON_NEW_MEMMAP = 0x00400000UL, RADEON_IS_PCI = 0x00800000UL, RADEON_IS_IGPGART = 0x01000000UL, + RADEON_IS_PX = 0x02000000UL, }; #endif diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 3e49342a20e6..fb3d13f693dd 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -35,9 +35,9 @@ #include <linux/pm_runtime.h> #if defined(CONFIG_VGA_SWITCHEROO) -bool radeon_is_px(void); +bool radeon_has_atpx(void); #else -static inline bool radeon_is_px(void) { return false; } +static inline bool radeon_has_atpx(void) { return false; } #endif /** @@ -107,6 +107,13 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags) flags |= RADEON_IS_PCI; } + if (radeon_runtime_pm == 1) + flags |= RADEON_IS_PX; + else if ((radeon_runtime_pm == -1) && + radeon_has_atpx() && + ((flags & RADEON_IS_IGP) == 0)) + flags |= RADEON_IS_PX; + /* radeon_device_init should report only fatal error * like memory allocation failure or iomapping failure, * or memory manager initialization failure, it must @@ -137,8 +144,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags) "Error during ACPI methods call\n"); } - if ((radeon_runtime_pm == 1) || - ((radeon_runtime_pm == -1) && radeon_is_px())) { + if (radeon_is_px(dev)) { pm_runtime_use_autosuspend(dev->dev); pm_runtime_set_autosuspend_delay(dev->dev, 5000); pm_runtime_set_active(dev->dev); @@ -568,12 +574,17 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) } r = radeon_vm_init(rdev, &fpriv->vm); - if (r) + if (r) { + kfree(fpriv); return r; + } r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); - if (r) + if (r) { + radeon_vm_fini(rdev, &fpriv->vm); + kfree(fpriv); return r; + } /* map the ib pool buffer read only into * virtual address space */ diff --git a/drivers/gpu/drm/radeon/radeon_ucode.h b/drivers/gpu/drm/radeon/radeon_ucode.h index a77cd274dfc3..58d12938c0b8 100644 --- a/drivers/gpu/drm/radeon/radeon_ucode.h +++ b/drivers/gpu/drm/radeon/radeon_ucode.h @@ -57,9 +57,14 @@ #define BTC_MC_UCODE_SIZE 6024 #define CAYMAN_MC_UCODE_SIZE 6037 #define SI_MC_UCODE_SIZE 7769 +#define TAHITI_MC_UCODE_SIZE 7808 +#define PITCAIRN_MC_UCODE_SIZE 7775 +#define VERDE_MC_UCODE_SIZE 7875 #define OLAND_MC_UCODE_SIZE 7863 -#define CIK_MC_UCODE_SIZE 7866 +#define BONAIRE_MC_UCODE_SIZE 7866 +#define BONAIRE_MC2_UCODE_SIZE 7948 #define HAWAII_MC_UCODE_SIZE 7933 +#define HAWAII_MC2_UCODE_SIZE 8091 /* SDMA */ #define CIK_SDMA_UCODE_SIZE 1050 diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c index 76e9904bc537..ced53dd03e7c 100644 --- a/drivers/gpu/drm/radeon/radeon_vce.c +++ b/drivers/gpu/drm/radeon/radeon_vce.c @@ -613,7 +613,7 @@ void radeon_vce_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence) { struct radeon_ring *ring = &rdev->ring[fence->ring]; - uint32_t addr = rdev->fence_drv[fence->ring].gpu_addr; + uint64_t addr = rdev->fence_drv[fence->ring].gpu_addr; radeon_ring_write(ring, VCE_CMD_FENCE); radeon_ring_write(ring, addr); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index d589475fe9e6..ac708e006180 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -39,30 +39,35 @@ MODULE_FIRMWARE("radeon/TAHITI_pfp.bin"); MODULE_FIRMWARE("radeon/TAHITI_me.bin"); MODULE_FIRMWARE("radeon/TAHITI_ce.bin"); MODULE_FIRMWARE("radeon/TAHITI_mc.bin"); +MODULE_FIRMWARE("radeon/TAHITI_mc2.bin"); MODULE_FIRMWARE("radeon/TAHITI_rlc.bin"); MODULE_FIRMWARE("radeon/TAHITI_smc.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_pfp.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_me.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_ce.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_mc.bin"); +MODULE_FIRMWARE("radeon/PITCAIRN_mc2.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_rlc.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_smc.bin"); MODULE_FIRMWARE("radeon/VERDE_pfp.bin"); MODULE_FIRMWARE("radeon/VERDE_me.bin"); MODULE_FIRMWARE("radeon/VERDE_ce.bin"); MODULE_FIRMWARE("radeon/VERDE_mc.bin"); +MODULE_FIRMWARE("radeon/VERDE_mc2.bin"); MODULE_FIRMWARE("radeon/VERDE_rlc.bin"); MODULE_FIRMWARE("radeon/VERDE_smc.bin"); MODULE_FIRMWARE("radeon/OLAND_pfp.bin"); MODULE_FIRMWARE("radeon/OLAND_me.bin"); MODULE_FIRMWARE("radeon/OLAND_ce.bin"); MODULE_FIRMWARE("radeon/OLAND_mc.bin"); +MODULE_FIRMWARE("radeon/OLAND_mc2.bin"); MODULE_FIRMWARE("radeon/OLAND_rlc.bin"); MODULE_FIRMWARE("radeon/OLAND_smc.bin"); MODULE_FIRMWARE("radeon/HAINAN_pfp.bin"); MODULE_FIRMWARE("radeon/HAINAN_me.bin"); MODULE_FIRMWARE("radeon/HAINAN_ce.bin"); MODULE_FIRMWARE("radeon/HAINAN_mc.bin"); +MODULE_FIRMWARE("radeon/HAINAN_mc2.bin"); MODULE_FIRMWARE("radeon/HAINAN_rlc.bin"); MODULE_FIRMWARE("radeon/HAINAN_smc.bin"); @@ -1467,36 +1472,33 @@ int si_mc_load_microcode(struct radeon_device *rdev) const __be32 *fw_data; u32 running, blackout = 0; u32 *io_mc_regs; - int i, ucode_size, regs_size; + int i, regs_size, ucode_size; if (!rdev->mc_fw) return -EINVAL; + ucode_size = rdev->mc_fw->size / 4; + switch (rdev->family) { case CHIP_TAHITI: io_mc_regs = (u32 *)&tahiti_io_mc_regs; - ucode_size = SI_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; case CHIP_PITCAIRN: io_mc_regs = (u32 *)&pitcairn_io_mc_regs; - ucode_size = SI_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; case CHIP_VERDE: default: io_mc_regs = (u32 *)&verde_io_mc_regs; - ucode_size = SI_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; case CHIP_OLAND: io_mc_regs = (u32 *)&oland_io_mc_regs; - ucode_size = OLAND_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; case CHIP_HAINAN: io_mc_regs = (u32 *)&hainan_io_mc_regs; - ucode_size = OLAND_MC_UCODE_SIZE; regs_size = TAHITI_IO_MC_REGS_SIZE; break; } @@ -1552,7 +1554,7 @@ static int si_init_microcode(struct radeon_device *rdev) const char *chip_name; const char *rlc_chip_name; size_t pfp_req_size, me_req_size, ce_req_size, rlc_req_size, mc_req_size; - size_t smc_req_size; + size_t smc_req_size, mc2_req_size; char fw_name[30]; int err; @@ -1567,6 +1569,7 @@ static int si_init_microcode(struct radeon_device *rdev) ce_req_size = SI_CE_UCODE_SIZE * 4; rlc_req_size = SI_RLC_UCODE_SIZE * 4; mc_req_size = SI_MC_UCODE_SIZE * 4; + mc2_req_size = TAHITI_MC_UCODE_SIZE * 4; smc_req_size = ALIGN(TAHITI_SMC_UCODE_SIZE, 4); break; case CHIP_PITCAIRN: @@ -1577,6 +1580,7 @@ static int si_init_microcode(struct radeon_device *rdev) ce_req_size = SI_CE_UCODE_SIZE * 4; rlc_req_size = SI_RLC_UCODE_SIZE * 4; mc_req_size = SI_MC_UCODE_SIZE * 4; + mc2_req_size = PITCAIRN_MC_UCODE_SIZE * 4; smc_req_size = ALIGN(PITCAIRN_SMC_UCODE_SIZE, 4); break; case CHIP_VERDE: @@ -1587,6 +1591,7 @@ static int si_init_microcode(struct radeon_device *rdev) ce_req_size = SI_CE_UCODE_SIZE * 4; rlc_req_size = SI_RLC_UCODE_SIZE * 4; mc_req_size = SI_MC_UCODE_SIZE * 4; + mc2_req_size = VERDE_MC_UCODE_SIZE * 4; smc_req_size = ALIGN(VERDE_SMC_UCODE_SIZE, 4); break; case CHIP_OLAND: @@ -1596,7 +1601,7 @@ static int si_init_microcode(struct radeon_device *rdev) me_req_size = SI_PM4_UCODE_SIZE * 4; ce_req_size = SI_CE_UCODE_SIZE * 4; rlc_req_size = SI_RLC_UCODE_SIZE * 4; - mc_req_size = OLAND_MC_UCODE_SIZE * 4; + mc_req_size = mc2_req_size = OLAND_MC_UCODE_SIZE * 4; smc_req_size = ALIGN(OLAND_SMC_UCODE_SIZE, 4); break; case CHIP_HAINAN: @@ -1606,7 +1611,7 @@ static int si_init_microcode(struct radeon_device *rdev) me_req_size = SI_PM4_UCODE_SIZE * 4; ce_req_size = SI_CE_UCODE_SIZE * 4; rlc_req_size = SI_RLC_UCODE_SIZE * 4; - mc_req_size = OLAND_MC_UCODE_SIZE * 4; + mc_req_size = mc2_req_size = OLAND_MC_UCODE_SIZE * 4; smc_req_size = ALIGN(HAINAN_SMC_UCODE_SIZE, 4); break; default: BUG(); @@ -1659,16 +1664,22 @@ static int si_init_microcode(struct radeon_device *rdev) err = -EINVAL; } - snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name); + snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc2.bin", chip_name); err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev); - if (err) - goto out; - if (rdev->mc_fw->size != mc_req_size) { + if (err) { + snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name); + err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev); + if (err) + goto out; + } + if ((rdev->mc_fw->size != mc_req_size) && + (rdev->mc_fw->size != mc2_req_size)) { printk(KERN_ERR "si_mc: Bogus length %zu in firmware \"%s\"\n", rdev->mc_fw->size, fw_name); err = -EINVAL; } + DRM_INFO("%s: %zu bytes\n", fw_name, rdev->mc_fw->size); snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name); err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev); diff --git a/drivers/gpu/host1x/hw/intr_hw.c b/drivers/gpu/host1x/hw/intr_hw.c index db9017adfe2b..498b37e39058 100644 --- a/drivers/gpu/host1x/hw/intr_hw.c +++ b/drivers/gpu/host1x/hw/intr_hw.c @@ -47,7 +47,7 @@ static irqreturn_t syncpt_thresh_isr(int irq, void *dev_id) unsigned long reg; int i, id; - for (i = 0; i <= BIT_WORD(host->info->nb_pts); i++) { + for (i = 0; i < DIV_ROUND_UP(host->info->nb_pts, 32); i++) { reg = host1x_sync_readl(host, HOST1X_SYNC_SYNCPT_THRESH_CPU0_INT_STATUS(i)); for_each_set_bit(id, ®, BITS_PER_LONG) { @@ -64,7 +64,7 @@ static void _host1x_intr_disable_all_syncpt_intrs(struct host1x *host) { u32 i; - for (i = 0; i <= BIT_WORD(host->info->nb_pts); ++i) { + for (i = 0; i < DIV_ROUND_UP(host->info->nb_pts, 32); ++i) { host1x_sync_writel(host, 0xffffffffu, HOST1X_SYNC_SYNCPT_THRESH_INT_DISABLE(i)); host1x_sync_writel(host, 0xffffffffu, |