diff options
Diffstat (limited to 'drivers/hid')
26 files changed, 3905 insertions, 2966 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index fbf49503508d..bf0617e47b89 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -527,6 +527,14 @@ config HID_PICOLCD_LEDS ---help--- Provide access to PicoLCD's GPO pins via leds class. +config HID_PICOLCD_CIR + bool "CIR via RC class" if EXPERT + default !EXPERT + depends on HID_PICOLCD + depends on HID_PICOLCD=RC_CORE || RC_CORE=y + ---help--- + Provide access to PicoLCD's CIR interface via remote control (LIRC). + config HID_PRIMAX tristate "Primax non-fully HID-compliant devices" depends on USB_HID @@ -534,6 +542,15 @@ config HID_PRIMAX Support for Primax devices that are not fully compliant with the HID standard. +config HID_PS3REMOTE + tristate "Sony PS3 BD Remote Control" + depends on BT_HIDP + ---help--- + Support for the Sony PS3 Blue-ray Disk Remote Control and Logitech + Harmony Adapter for PS3, which connect over Bluetooth. + + Support for the 6-axis controllers is provided by HID_SONY. + config HID_ROCCAT tristate "Roccat device support" depends on USB_HID @@ -561,7 +578,9 @@ config HID_SONY tristate "Sony PS3 controller" depends on USB_HID ---help--- - Support for Sony PS3 controller. + Support for Sony PS3 6-axis controllers. + + Support for the Sony PS3 BD Remote is provided by HID_PS3REMOTE. config HID_SPEEDLINK tristate "Speedlink VAD Cezanne mouse support" diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index f975485f88b2..5a3690ff9bf2 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -69,7 +69,28 @@ obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o +hid-picolcd-y += hid-picolcd_core.o +ifdef CONFIG_HID_PICOLCD_FB +hid-picolcd-y += hid-picolcd_fb.o +endif +ifdef CONFIG_HID_PICOLCD_BACKLIGHT +hid-picolcd-y += hid-picolcd_backlight.o +endif +ifdef CONFIG_HID_PICOLCD_LCD +hid-picolcd-y += hid-picolcd_lcd.o +endif +ifdef CONFIG_HID_PICOLCD_LEDS +hid-picolcd-y += hid-picolcd_leds.o +endif +ifdef CONFIG_HID_PICOLCD_CIR +hid-picolcd-y += hid-picolcd_cir.o +endif +ifdef CONFIG_DEBUG_FS +hid-picolcd-y += hid-picolcd_debugfs.o +endif + obj-$(CONFIG_HID_PRIMAX) += hid-primax.o +obj-$(CONFIG_HID_PS3REMOTE) += hid-ps3remote.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \ hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \ hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o \ diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8bcd168fffae..9072e0ed1876 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1566,6 +1566,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RECEIVER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_DESKTOP) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI) }, @@ -1639,6 +1640,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, @@ -1663,6 +1665,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 1dcb76ff51e3..a534375fdf2e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -283,6 +283,9 @@ #define USB_VENDOR_ID_EMS 0x2006 #define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118 +#define USB_VENDOR_ID_FLATFROG 0x25b5 +#define USB_DEVICE_ID_MULTITOUCH_3200 0x0002 + #define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100 @@ -496,6 +499,7 @@ #define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f +#define USB_DEVICE_ID_LOGITECH_HARMONY_PS3 0x0306 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD 0xc20a #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD 0xc211 #define USB_DEVICE_ID_LOGITECH_EXTREME_3D 0xc215 @@ -683,6 +687,7 @@ #define USB_VENDOR_ID_SONY 0x054c #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b +#define USB_DEVICE_ID_SONY_PS3_BDREMOTE 0x0306 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268 #define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER 0x042f @@ -758,6 +763,7 @@ #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP1062 0x0064 #define USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850 0x0522 +#define USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60 0x0781 #define USB_VENDOR_ID_UNITEC 0x227d #define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709 0x0709 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 811bfad64609..d917c0d53685 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1154,6 +1154,7 @@ static void report_features(struct hid_device *hid) int hidinput_connect(struct hid_device *hid, unsigned int force) { + struct hid_driver *drv = hid->driver; struct hid_report *report; struct hid_input *hidinput = NULL; struct input_dev *input_dev; @@ -1228,6 +1229,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) * UGCI) cram a lot of unrelated inputs into the * same interface. */ hidinput->report = report; + if (drv->input_configured) + drv->input_configured(hid, hidinput); if (input_register_device(hidinput->input)) goto out_cleanup; hidinput = NULL; @@ -1235,8 +1238,12 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) } } - if (hidinput && input_register_device(hidinput->input)) - goto out_cleanup; + if (hidinput) { + if (drv->input_configured) + drv->input_configured(hid, hidinput); + if (input_register_device(hidinput->input)) + goto out_cleanup; + } return 0; diff --git a/drivers/hid/hid-lenovo-tpkbd.c b/drivers/hid/hid-lenovo-tpkbd.c index 77d2df04c97b..60c4e1e85913 100644 --- a/drivers/hid/hid-lenovo-tpkbd.c +++ b/drivers/hid/hid-lenovo-tpkbd.c @@ -519,6 +519,8 @@ static void tpkbd_remove_tp(struct hid_device *hdev) led_classdev_unregister(&data_pointer->led_mute); hid_set_drvdata(hdev, NULL); + kfree(data_pointer->led_micmute.name); + kfree(data_pointer->led_mute.name); kfree(data_pointer); } diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index fc37ed6b108c..afc4de389f81 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -342,6 +342,9 @@ static int lg_event(struct hid_device *hdev, struct hid_field *field, -value); return 1; } + if (drv_data->quirks & LG_FF4) { + return lg4ff_adjust_input_event(hdev, field, usage, value, drv_data); + } return 0; } @@ -358,7 +361,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) return -ENOMEM; } drv_data->quirks = id->driver_data; - + hid_set_drvdata(hdev, (void *)drv_data); if (drv_data->quirks & LG_NOGET) @@ -380,7 +383,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) } /* Setup wireless link with Logitech Wii wheel */ - if(hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) { + if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) { unsigned char buf[] = { 0x00, 0xAF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); @@ -476,7 +479,7 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_NOGET | LG_FF4 }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL), .driver_data = LG_FF4 }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ), + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG), .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index d64cf8d2751e..142ce3f5f055 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -25,9 +25,13 @@ static inline int lg3ff_init(struct hid_device *hdev) { return -1; } #endif #ifdef CONFIG_LOGIWHEELS_FF +int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value, struct lg_drv_data *drv_data); int lg4ff_init(struct hid_device *hdev); int lg4ff_deinit(struct hid_device *hdev); #else +static inline int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value, struct lg_drv_data *drv_data) { return 0; } static inline int lg4ff_init(struct hid_device *hdev) { return -1; } static inline int lg4ff_deinit(struct hid_device *hdev) { return -1; } #endif diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c index f3390ee6105c..4fb4a80928c8 100644 --- a/drivers/hid/hid-lg4ff.c +++ b/drivers/hid/hid-lg4ff.c @@ -43,6 +43,11 @@ #define G27_REV_MAJ 0x12 #define G27_REV_MIN 0x38 +#define DFP_X_MIN 0 +#define DFP_X_MAX 16383 +#define DFP_PEDAL_MIN 0 +#define DFP_PEDAL_MAX 255 + #define to_hid_device(pdev) container_of(pdev, struct hid_device, dev) static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range); @@ -53,6 +58,7 @@ static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *at static DEVICE_ATTR(range, S_IRWXU | S_IRWXG | S_IRWXO, lg4ff_range_show, lg4ff_range_store); struct lg4ff_device_entry { + __u32 product_id; __u16 range; __u16 min_range; __u16 max_range; @@ -129,26 +135,77 @@ static const struct lg4ff_usb_revision lg4ff_revs[] = { {G27_REV_MAJ, G27_REV_MIN, &native_g27}, /* G27 */ }; +/* Recalculates X axis value accordingly to currently selected range */ +static __s32 lg4ff_adjust_dfp_x_axis(__s32 value, __u16 range) +{ + __u16 max_range; + __s32 new_value; + + if (range == 900) + return value; + else if (range == 200) + return value; + else if (range < 200) + max_range = 200; + else + max_range = 900; + + new_value = 8192 + mult_frac(value - 8192, max_range, range); + if (new_value < 0) + return 0; + else if (new_value > 16383) + return 16383; + else + return new_value; +} + +int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value, struct lg_drv_data *drv_data) +{ + struct lg4ff_device_entry *entry = drv_data->device_props; + __s32 new_value = 0; + + if (!entry) { + hid_err(hid, "Device properties not found"); + return 0; + } + + switch (entry->product_id) { + case USB_DEVICE_ID_LOGITECH_DFP_WHEEL: + switch (usage->code) { + case ABS_X: + new_value = lg4ff_adjust_dfp_x_axis(value, entry->range); + input_event(field->hidinput->input, usage->type, usage->code, new_value); + return 1; + default: + return 0; + } + default: + return 0; + } +} + static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect) { struct hid_device *hid = input_get_drvdata(dev); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; int x; -#define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff +#define CLAMP(x) do { if (x < 0) x = 0; else if (x > 0xff) x = 0xff; } while (0) switch (effect->type) { case FF_CONSTANT: x = effect->u.ramp.start_level + 0x80; /* 0x80 is no force */ CLAMP(x); - report->field[0]->value[0] = 0x11; /* Slot 1 */ - report->field[0]->value[1] = 0x08; - report->field[0]->value[2] = x; - report->field[0]->value[3] = 0x80; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0x11; /* Slot 1 */ + value[1] = 0x08; + value[2] = x; + value[3] = 0x80; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); break; @@ -163,14 +220,15 @@ static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud struct hid_device *hid = input_get_drvdata(dev); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; - report->field[0]->value[0] = 0xfe; - report->field[0]->value[1] = 0x0d; - report->field[0]->value[2] = magnitude >> 13; - report->field[0]->value[3] = magnitude >> 13; - report->field[0]->value[4] = magnitude >> 8; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xfe; + value[1] = 0x0d; + value[2] = magnitude >> 13; + value[3] = magnitude >> 13; + value[4] = magnitude >> 8; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -181,16 +239,16 @@ static void hid_lg4ff_set_autocenter_ffex(struct input_dev *dev, u16 magnitude) struct hid_device *hid = input_get_drvdata(dev); struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; magnitude = magnitude * 90 / 65535; - - report->field[0]->value[0] = 0xfe; - report->field[0]->value[1] = 0x03; - report->field[0]->value[2] = magnitude >> 14; - report->field[0]->value[3] = magnitude >> 14; - report->field[0]->value[4] = magnitude; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xfe; + value[1] = 0x03; + value[2] = magnitude >> 14; + value[3] = magnitude >> 14; + value[4] = magnitude; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -200,15 +258,17 @@ static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range) { struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; + dbg_hid("G25/G27/DFGT: setting range to %u\n", range); - report->field[0]->value[0] = 0xf8; - report->field[0]->value[1] = 0x81; - report->field[0]->value[2] = range & 0x00ff; - report->field[0]->value[3] = (range & 0xff00) >> 8; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xf8; + value[1] = 0x81; + value[2] = range & 0x00ff; + value[3] = (range & 0xff00) >> 8; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -219,16 +279,18 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range) struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); int start_left, start_right, full_range; + __s32 *value = report->field[0]->value; + dbg_hid("Driving Force Pro: setting range to %u\n", range); /* Prepare "coarse" limit command */ - report->field[0]->value[0] = 0xf8; - report->field[0]->value[1] = 0x00; /* Set later */ - report->field[0]->value[2] = 0x00; - report->field[0]->value[3] = 0x00; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0xf8; + value[1] = 0x00; /* Set later */ + value[2] = 0x00; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; if (range > 200) { report->field[0]->value[1] = 0x03; @@ -240,13 +302,13 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range) usbhid_submit_report(hid, report, USB_DIR_OUT); /* Prepare "fine" limit command */ - report->field[0]->value[0] = 0x81; - report->field[0]->value[1] = 0x0b; - report->field[0]->value[2] = 0x00; - report->field[0]->value[3] = 0x00; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + value[0] = 0x81; + value[1] = 0x0b; + value[2] = 0x00; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; if (range == 200 || range == 900) { /* Do not apply any fine limit */ usbhid_submit_report(hid, report, USB_DIR_OUT); @@ -257,11 +319,11 @@ static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range) start_left = (((full_range - range + 1) * 2047) / full_range); start_right = 0xfff - start_left; - report->field[0]->value[2] = start_left >> 4; - report->field[0]->value[3] = start_right >> 4; - report->field[0]->value[4] = 0xff; - report->field[0]->value[5] = (start_right & 0xe) << 4 | (start_left & 0xe); - report->field[0]->value[6] = 0xff; + value[2] = start_left >> 4; + value[3] = start_right >> 4; + value[4] = 0xff; + value[5] = (start_right & 0xe) << 4 | (start_left & 0xe); + value[6] = 0xff; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -344,14 +406,15 @@ static void lg4ff_set_leds(struct hid_device *hid, __u8 leds) { struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; struct hid_report *report = list_entry(report_list->next, struct hid_report, list); - - report->field[0]->value[0] = 0xf8; - report->field[0]->value[1] = 0x12; - report->field[0]->value[2] = leds; - report->field[0]->value[3] = 0x00; - report->field[0]->value[4] = 0x00; - report->field[0]->value[5] = 0x00; - report->field[0]->value[6] = 0x00; + __s32 *value = report->field[0]->value; + + value[0] = 0xf8; + value[1] = 0x12; + value[2] = leds; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; usbhid_submit_report(hid, report, USB_DIR_OUT); } @@ -501,7 +564,7 @@ int lg4ff_init(struct hid_device *hid) /* Check if autocentering is available and * set the centering force to zero by default */ if (test_bit(FF_AUTOCENTER, dev->ffbit)) { - if(rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN) /* Formula Force EX expects different autocentering command */ + if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN) /* Formula Force EX expects different autocentering command */ dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex; else dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default; @@ -524,6 +587,7 @@ int lg4ff_init(struct hid_device *hid) } drv_data->device_props = entry; + entry->product_id = lg4ff_devices[i].product_id; entry->min_range = lg4ff_devices[i].min_range; entry->max_range = lg4ff_devices[i].max_range; entry->set_range = lg4ff_devices[i].set_range; @@ -534,6 +598,18 @@ int lg4ff_init(struct hid_device *hid) return error; dbg_hid("sysfs interface created\n"); + /* Set default axes parameters */ + switch (lg4ff_devices[i].product_id) { + case USB_DEVICE_ID_LOGITECH_DFP_WHEEL: + dbg_hid("Setting axes parameters for Driving Force Pro\n"); + input_set_abs_params(dev, ABS_X, DFP_X_MIN, DFP_X_MAX, 0, 0); + input_set_abs_params(dev, ABS_Y, DFP_PEDAL_MIN, DFP_PEDAL_MAX, 0, 0); + input_set_abs_params(dev, ABS_RZ, DFP_PEDAL_MIN, DFP_PEDAL_MAX, 0, 0); + break; + default: + break; + } + /* Set the maximum range to start with */ entry->range = entry->max_range; if (entry->set_range != NULL) @@ -594,6 +670,8 @@ out: return 0; } + + int lg4ff_deinit(struct hid_device *hid) { struct lg4ff_device_entry *entry; diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 4d524b5f52f5..9500f2f3f8fe 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -193,6 +193,7 @@ static struct hid_ll_driver logi_dj_ll_driver; static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf, size_t count, unsigned char report_type); +static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev); static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) @@ -233,6 +234,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] & SPFUNCTION_DEVICE_LIST_EMPTY) { dbg_hid("%s: device list is empty\n", __func__); + djrcv_dev->querying_devices = false; return; } @@ -243,6 +245,12 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, return; } + if (djrcv_dev->paired_dj_devices[dj_report->device_index]) { + /* The device is already known. No need to reallocate it. */ + dbg_hid("%s: device is already known\n", __func__); + return; + } + dj_hiddev = hid_allocate_device(); if (IS_ERR(dj_hiddev)) { dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n", @@ -306,6 +314,7 @@ static void delayedwork_callback(struct work_struct *work) struct dj_report dj_report; unsigned long flags; int count; + int retval; dbg_hid("%s\n", __func__); @@ -338,6 +347,25 @@ static void delayedwork_callback(struct work_struct *work) logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report); break; default: + /* A normal report (i. e. not belonging to a pair/unpair notification) + * arriving here, means that the report arrived but we did not have a + * paired dj_device associated to the report's device_index, this + * means that the original "device paired" notification corresponding + * to this dj_device never arrived to this driver. The reason is that + * hid-core discards all packets coming from a device while probe() is + * executing. */ + if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) { + /* ok, we don't know the device, just re-ask the + * receiver for the list of connected devices. */ + retval = logi_dj_recv_query_paired_devices(djrcv_dev); + if (!retval) { + /* everything went fine, so just leave */ + break; + } + dev_err(&djrcv_dev->hdev->dev, + "%s:logi_dj_recv_query_paired_devices " + "error:%d\n", __func__, retval); + } dbg_hid("%s: unexpected report type\n", __func__); } } @@ -368,6 +396,12 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev, if (!djdev) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -398,6 +432,12 @@ static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev, if (dj_device == NULL) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -439,6 +479,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) struct dj_report *dj_report; int retval; + /* no need to protect djrcv_dev->querying_devices */ + if (djrcv_dev->querying_devices) + return 0; + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; @@ -450,6 +494,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) return retval; } + static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h index fd28a5e0ca3b..4a4000340ce1 100644 --- a/drivers/hid/hid-logitech-dj.h +++ b/drivers/hid/hid-logitech-dj.h @@ -101,6 +101,7 @@ struct dj_receiver_dev { struct work_struct work; struct kfifo notif_fifo; spinlock_t lock; + bool querying_devices; }; struct dj_device { diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 73647266daad..25ddf3e3aec6 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -392,7 +392,7 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd __set_bit(EV_ABS, input->evbit); - error = input_mt_init_slots(input, 16); + error = input_mt_init_slots(input, 16, 0); if (error) return error; input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2, diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 59c8b5c1d2de..ee0b76b398cb 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -51,12 +51,12 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_VALID_IS_INRANGE (1 << 5) #define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 6) #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 8) +#define MT_QUIRK_NO_AREA (1 << 9) struct mt_slot { __s32 x, y, p, w, h; __s32 contactid; /* the device ContactID assigned to this slot */ bool touch_state; /* is the touch valid? */ - bool seen_in_this_frame;/* has this slot been updated */ }; struct mt_class { @@ -92,8 +92,9 @@ struct mt_device { __u8 touches_by_report; /* how many touches are present in one report: * 1 means we should use a serial protocol * > 1 means hybrid (multitouch) protocol */ + bool serial_maybe; /* need to check for serial protocol */ bool curvalid; /* is the current contact valid? */ - struct mt_slot *slots; + unsigned mt_flags; /* flags to pass to input-mt */ }; /* classes of device behavior */ @@ -115,6 +116,7 @@ struct mt_device { #define MT_CLS_EGALAX_SERIAL 0x0104 #define MT_CLS_TOPSEED 0x0105 #define MT_CLS_PANASONIC 0x0106 +#define MT_CLS_FLATFROG 0x0107 #define MT_DEFAULT_MAXCONTACT 10 @@ -134,25 +136,6 @@ static int cypress_compute_slot(struct mt_device *td) return -1; } -static int find_slot_from_contactid(struct mt_device *td) -{ - int i; - for (i = 0; i < td->maxcontacts; ++i) { - if (td->slots[i].contactid == td->curdata.contactid && - td->slots[i].touch_state) - return i; - } - for (i = 0; i < td->maxcontacts; ++i) { - if (!td->slots[i].seen_in_this_frame && - !td->slots[i].touch_state) - return i; - } - /* should not occurs. If this happens that means - * that the device sent more touches that it says - * in the report descriptor. It is ignored then. */ - return -1; -} - static struct mt_class mt_classes[] = { { .name = MT_CLS_DEFAULT, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP }, @@ -190,7 +173,9 @@ static struct mt_class mt_classes[] = { MT_QUIRK_SLOT_IS_CONTACTID, .sn_move = 2048, .sn_width = 128, - .sn_height = 128 }, + .sn_height = 128, + .maxcontacts = 60, + }, { .name = MT_CLS_CYPRESS, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | MT_QUIRK_CYPRESS, @@ -216,6 +201,12 @@ static struct mt_class mt_classes[] = { .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP, .maxcontacts = 4 }, + { .name = MT_CLS_FLATFROG, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | + MT_QUIRK_NO_AREA, + .sn_move = 2048, + .maxcontacts = 40, + }, { } }; @@ -319,24 +310,16 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, * We need to ignore fields that belong to other collections * such as Mouse that might have the same GenericDesktop usages. */ if (field->application == HID_DG_TOUCHSCREEN) - set_bit(INPUT_PROP_DIRECT, hi->input->propbit); + td->mt_flags |= INPUT_MT_DIRECT; else if (field->application != HID_DG_TOUCHPAD) return 0; - /* In case of an indirect device (touchpad), we need to add - * specific BTN_TOOL_* to be handled by the synaptics xorg - * driver. - * We also consider that touchscreens providing buttons are touchpads. + /* + * Model touchscreens providing buttons as touchpads. */ if (field->application == HID_DG_TOUCHPAD || - (usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON || - cls->is_indirect) { - set_bit(INPUT_PROP_POINTER, hi->input->propbit); - set_bit(BTN_TOOL_FINGER, hi->input->keybit); - set_bit(BTN_TOOL_DOUBLETAP, hi->input->keybit); - set_bit(BTN_TOOL_TRIPLETAP, hi->input->keybit); - set_bit(BTN_TOOL_QUADTAP, hi->input->keybit); - } + (usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) + td->mt_flags |= INPUT_MT_POINTER; /* eGalax devices provide a Digitizer.Stylus input which overrides * the correct Digitizers.Finger X/Y ranges. @@ -353,8 +336,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, EV_ABS, ABS_MT_POSITION_X); set_abs(hi->input, ABS_MT_POSITION_X, field, cls->sn_move); - /* touchscreen emulation */ - set_abs(hi->input, ABS_X, field, cls->sn_move); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -363,8 +344,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, EV_ABS, ABS_MT_POSITION_Y); set_abs(hi->input, ABS_MT_POSITION_Y, field, cls->sn_move); - /* touchscreen emulation */ - set_abs(hi->input, ABS_Y, field, cls->sn_move); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -388,9 +367,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, td->last_field_index = field->index; return 1; case HID_DG_CONTACTID: - if (!td->maxcontacts) - td->maxcontacts = MT_DEFAULT_MAXCONTACT; - input_mt_init_slots(hi->input, td->maxcontacts); mt_store_field(usage, td, hi); td->last_field_index = field->index; td->touches_by_report++; @@ -398,18 +374,21 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); - set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, - cls->sn_width); + if (!(cls->quirks & MT_QUIRK_NO_AREA)) + set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, + cls->sn_width); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MINOR); - set_abs(hi->input, ABS_MT_TOUCH_MINOR, field, - cls->sn_height); - input_set_abs_params(hi->input, + if (!(cls->quirks & MT_QUIRK_NO_AREA)) { + set_abs(hi->input, ABS_MT_TOUCH_MINOR, field, + cls->sn_height); + input_set_abs_params(hi->input, ABS_MT_ORIENTATION, 0, 1, 0, 0); + } mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -418,9 +397,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, EV_ABS, ABS_MT_PRESSURE); set_abs(hi->input, ABS_MT_PRESSURE, field, cls->sn_pressure); - /* touchscreen emulation */ - set_abs(hi->input, ABS_PRESSURE, field, - cls->sn_pressure); mt_store_field(usage, td, hi); td->last_field_index = field->index; return 1; @@ -464,7 +440,7 @@ static int mt_input_mapped(struct hid_device *hdev, struct hid_input *hi, return -1; } -static int mt_compute_slot(struct mt_device *td) +static int mt_compute_slot(struct mt_device *td, struct input_dev *input) { __s32 quirks = td->mtclass.quirks; @@ -480,42 +456,23 @@ static int mt_compute_slot(struct mt_device *td) if (quirks & MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE) return td->curdata.contactid - 1; - return find_slot_from_contactid(td); + return input_mt_get_slot_by_key(input, td->curdata.contactid); } /* * this function is called when a whole contact has been processed, * so that it can assign it to a slot and store the data there */ -static void mt_complete_slot(struct mt_device *td) +static void mt_complete_slot(struct mt_device *td, struct input_dev *input) { - td->curdata.seen_in_this_frame = true; if (td->curvalid) { - int slotnum = mt_compute_slot(td); - - if (slotnum >= 0 && slotnum < td->maxcontacts) - td->slots[slotnum] = td->curdata; - } - td->num_received++; -} - + int slotnum = mt_compute_slot(td, input); + struct mt_slot *s = &td->curdata; -/* - * this function is called when a whole packet has been received and processed, - * so that it can decide what to send to the input layer. - */ -static void mt_emit_event(struct mt_device *td, struct input_dev *input) -{ - int i; + if (slotnum < 0 || slotnum >= td->maxcontacts) + return; - for (i = 0; i < td->maxcontacts; ++i) { - struct mt_slot *s = &(td->slots[i]); - if ((td->mtclass.quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) && - !s->seen_in_this_frame) { - s->touch_state = false; - } - - input_mt_slot(input, i); + input_mt_slot(input, slotnum); input_mt_report_slot_state(input, MT_TOOL_FINGER, s->touch_state); if (s->touch_state) { @@ -532,24 +489,29 @@ static void mt_emit_event(struct mt_device *td, struct input_dev *input) input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); } - s->seen_in_this_frame = false; - } - input_mt_report_pointer_emulation(input, true); + td->num_received++; +} + +/* + * this function is called when a whole packet has been received and processed, + * so that it can decide what to send to the input layer. + */ +static void mt_sync_frame(struct mt_device *td, struct input_dev *input) +{ + input_mt_sync_frame(input); input_sync(input); td->num_received = 0; } - - static int mt_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct mt_device *td = hid_get_drvdata(hid); __s32 quirks = td->mtclass.quirks; - if (hid->claimed & HID_CLAIMED_INPUT && td->slots) { + if (hid->claimed & HID_CLAIMED_INPUT) { switch (usage->hid) { case HID_DG_INRANGE: if (quirks & MT_QUIRK_ALWAYS_VALID) @@ -602,11 +564,11 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, } if (usage->hid == td->last_slot_field) - mt_complete_slot(td); + mt_complete_slot(td, field->hidinput->input); if (field->index == td->last_field_index && td->num_received >= td->num_expected) - mt_emit_event(td, field->hidinput->input); + mt_sync_frame(td, field->hidinput->input); } @@ -685,6 +647,35 @@ static void mt_post_parse(struct mt_device *td) } } +static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi) + +{ + struct mt_device *td = hid_get_drvdata(hdev); + struct mt_class *cls = &td->mtclass; + struct input_dev *input = hi->input; + + /* Only initialize slots for MT input devices */ + if (!test_bit(ABS_MT_POSITION_X, input->absbit)) + return; + + if (!td->maxcontacts) + td->maxcontacts = MT_DEFAULT_MAXCONTACT; + + mt_post_parse(td); + if (td->serial_maybe) + mt_post_parse_default_settings(td); + + if (cls->is_indirect) + td->mt_flags |= INPUT_MT_POINTER; + + if (cls->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) + td->mt_flags |= INPUT_MT_DROP_UNUSED; + + input_mt_init_slots(input, td->maxcontacts, td->mt_flags); + + td->mt_flags = 0; +} + static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret, i; @@ -722,6 +713,9 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) goto fail; } + if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID) + td->serial_maybe = true; + ret = hid_parse(hdev); if (ret != 0) goto fail; @@ -730,20 +724,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret) goto fail; - mt_post_parse(td); - - if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID) - mt_post_parse_default_settings(td); - - td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), - GFP_KERNEL); - if (!td->slots) { - dev_err(&hdev->dev, "cannot allocate multitouch slots\n"); - hid_hw_stop(hdev); - ret = -ENOMEM; - goto fail; - } - ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group); mt_set_maxcontacts(hdev); @@ -774,7 +754,6 @@ static void mt_remove(struct hid_device *hdev) struct mt_device *td = hid_get_drvdata(hdev); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); - kfree(td->slots); kfree(td); hid_set_drvdata(hdev, NULL); } @@ -892,6 +871,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) }, + /* Flatfrog Panels */ + { .driver_data = MT_CLS_FLATFROG, + MT_USB_DEVICE(USB_VENDOR_ID_FLATFROG, + USB_DEVICE_ID_MULTITOUCH_3200) }, + /* GeneralTouch panel */ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, MT_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, @@ -1087,6 +1071,7 @@ static struct hid_driver mt_driver = { .remove = mt_remove, .input_mapping = mt_input_mapping, .input_mapped = mt_input_mapped, + .input_configured = mt_input_configured, .feature_mapping = mt_feature_mapping, .usage_table = mt_grabbed_usages, .event = mt_event, diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c deleted file mode 100644 index 27c8ebdfad01..000000000000 --- a/drivers/hid/hid-picolcd.c +++ /dev/null @@ -1,2748 +0,0 @@ -/*************************************************************************** - * Copyright (C) 2010 by Bruno Prémont <bonbons@linux-vserver.org> * - * * - * Based on Logitech G13 driver (v0.4) * - * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * - * * - * This program is free software: you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation, version 2 of the License. * - * * - * This driver is distributed in the hope that it will be useful, but * - * WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * - * General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this software. If not see <http://www.gnu.org/licenses/>. * - ***************************************************************************/ - -#include <linux/hid.h> -#include <linux/hid-debug.h> -#include <linux/input.h> -#include "hid-ids.h" -#include "usbhid/usbhid.h" -#include <linux/usb.h> - -#include <linux/fb.h> -#include <linux/vmalloc.h> -#include <linux/backlight.h> -#include <linux/lcd.h> - -#include <linux/leds.h> - -#include <linux/seq_file.h> -#include <linux/debugfs.h> - -#include <linux/completion.h> -#include <linux/uaccess.h> -#include <linux/module.h> - -#define PICOLCD_NAME "PicoLCD (graphic)" - -/* Report numbers */ -#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */ -#define ERR_SUCCESS 0x00 -#define ERR_PARAMETER_MISSING 0x01 -#define ERR_DATA_MISSING 0x02 -#define ERR_BLOCK_READ_ONLY 0x03 -#define ERR_BLOCK_NOT_ERASABLE 0x04 -#define ERR_BLOCK_TOO_BIG 0x05 -#define ERR_SECTION_OVERFLOW 0x06 -#define ERR_INVALID_CMD_LEN 0x07 -#define ERR_INVALID_DATA_LEN 0x08 -#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */ -#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */ -#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */ -#define REPORT_MEMORY 0x41 /* LCD: IN[63] */ -#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */ -#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */ -#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */ -#define REPORT_RESET 0x93 /* LCD: OUT[2] */ -#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */ -#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */ -#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */ -#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */ -#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */ -#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */ -#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */ -#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */ -#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */ -#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */ -#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ -#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ -#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ -#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ -#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ -#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */ -#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ -#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ - -#ifdef CONFIG_HID_PICOLCD_FB -/* Framebuffer - * - * The PicoLCD use a Topway LCD module of 256x64 pixel - * This display area is tiled over 4 controllers with 8 tiles - * each. Each tile has 8x64 pixel, each data byte representing - * a 1-bit wide vertical line of the tile. - * - * The display can be updated at a tile granularity. - * - * Chip 1 Chip 2 Chip 3 Chip 4 - * +----------------+----------------+----------------+----------------+ - * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | - * +----------------+----------------+----------------+----------------+ - * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | - * +----------------+----------------+----------------+----------------+ - * ... - * +----------------+----------------+----------------+----------------+ - * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | - * +----------------+----------------+----------------+----------------+ - */ -#define PICOLCDFB_NAME "picolcdfb" -#define PICOLCDFB_WIDTH (256) -#define PICOLCDFB_HEIGHT (64) -#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) - -#define PICOLCDFB_UPDATE_RATE_LIMIT 10 -#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 - -/* Framebuffer visual structures */ -static const struct fb_fix_screeninfo picolcdfb_fix = { - .id = PICOLCDFB_NAME, - .type = FB_TYPE_PACKED_PIXELS, - .visual = FB_VISUAL_MONO01, - .xpanstep = 0, - .ypanstep = 0, - .ywrapstep = 0, - .line_length = PICOLCDFB_WIDTH / 8, - .accel = FB_ACCEL_NONE, -}; - -static const struct fb_var_screeninfo picolcdfb_var = { - .xres = PICOLCDFB_WIDTH, - .yres = PICOLCDFB_HEIGHT, - .xres_virtual = PICOLCDFB_WIDTH, - .yres_virtual = PICOLCDFB_HEIGHT, - .width = 103, - .height = 26, - .bits_per_pixel = 1, - .grayscale = 1, - .red = { - .offset = 0, - .length = 1, - .msb_right = 0, - }, - .green = { - .offset = 0, - .length = 1, - .msb_right = 0, - }, - .blue = { - .offset = 0, - .length = 1, - .msb_right = 0, - }, - .transp = { - .offset = 0, - .length = 0, - .msb_right = 0, - }, -}; -#endif /* CONFIG_HID_PICOLCD_FB */ - -/* Input device - * - * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys - * and header for 4x4 key matrix. The built-in keys are part of the matrix. - */ -static const unsigned short def_keymap[] = { - KEY_RESERVED, /* none */ - KEY_BACK, /* col 4 + row 1 */ - KEY_HOMEPAGE, /* col 3 + row 1 */ - KEY_RESERVED, /* col 2 + row 1 */ - KEY_RESERVED, /* col 1 + row 1 */ - KEY_SCROLLUP, /* col 4 + row 2 */ - KEY_OK, /* col 3 + row 2 */ - KEY_SCROLLDOWN, /* col 2 + row 2 */ - KEY_RESERVED, /* col 1 + row 2 */ - KEY_RESERVED, /* col 4 + row 3 */ - KEY_RESERVED, /* col 3 + row 3 */ - KEY_RESERVED, /* col 2 + row 3 */ - KEY_RESERVED, /* col 1 + row 3 */ - KEY_RESERVED, /* col 4 + row 4 */ - KEY_RESERVED, /* col 3 + row 4 */ - KEY_RESERVED, /* col 2 + row 4 */ - KEY_RESERVED, /* col 1 + row 4 */ -}; -#define PICOLCD_KEYS ARRAY_SIZE(def_keymap) - -/* Description of in-progress IO operation, used for operations - * that trigger response from device */ -struct picolcd_pending { - struct hid_report *out_report; - struct hid_report *in_report; - struct completion ready; - int raw_size; - u8 raw_data[64]; -}; - -/* Per device data structure */ -struct picolcd_data { - struct hid_device *hdev; -#ifdef CONFIG_DEBUG_FS - struct dentry *debug_reset; - struct dentry *debug_eeprom; - struct dentry *debug_flash; - struct mutex mutex_flash; - int addr_sz; -#endif - u8 version[2]; - unsigned short opmode_delay; - /* input stuff */ - u8 pressed_keys[2]; - struct input_dev *input_keys; - struct input_dev *input_cir; - unsigned short keycode[PICOLCD_KEYS]; - -#ifdef CONFIG_HID_PICOLCD_FB - /* Framebuffer stuff */ - u8 fb_update_rate; - u8 fb_bpp; - u8 fb_force; - u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */ - u8 *fb_bitmap; /* framebuffer */ - struct fb_info *fb_info; - struct fb_deferred_io fb_defio; -#endif /* CONFIG_HID_PICOLCD_FB */ -#ifdef CONFIG_HID_PICOLCD_LCD - struct lcd_device *lcd; - u8 lcd_contrast; -#endif /* CONFIG_HID_PICOLCD_LCD */ -#ifdef CONFIG_HID_PICOLCD_BACKLIGHT - struct backlight_device *backlight; - u8 lcd_brightness; - u8 lcd_power; -#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ -#ifdef CONFIG_HID_PICOLCD_LEDS - /* LED stuff */ - u8 led_state; - struct led_classdev *led[8]; -#endif /* CONFIG_HID_PICOLCD_LEDS */ - - /* Housekeeping stuff */ - spinlock_t lock; - struct mutex mutex; - struct picolcd_pending *pending; - int status; -#define PICOLCD_BOOTLOADER 1 -#define PICOLCD_FAILED 2 -#define PICOLCD_READY_FB 4 -}; - - -/* Find a given report */ -#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT) -#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT) - -static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir) -{ - struct list_head *feature_report_list = &hdev->report_enum[dir].report_list; - struct hid_report *report = NULL; - - list_for_each_entry(report, feature_report_list, list) { - if (report->id == id) - return report; - } - hid_warn(hdev, "No report with id 0x%x found\n", id); - return NULL; -} - -#ifdef CONFIG_DEBUG_FS -static void picolcd_debug_out_report(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report); -#define usbhid_submit_report(a, b, c) \ - do { \ - picolcd_debug_out_report(hid_get_drvdata(a), a, b); \ - usbhid_submit_report(a, b, c); \ - } while (0) -#endif - -/* Submit a report and wait for a reply from device - if device fades away - * or does not respond in time, return NULL */ -static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, - int report_id, const u8 *raw_data, int size) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct picolcd_pending *work; - struct hid_report *report = picolcd_out_report(report_id, hdev); - unsigned long flags; - int i, j, k; - - if (!report || !data) - return NULL; - if (data->status & PICOLCD_FAILED) - return NULL; - work = kzalloc(sizeof(*work), GFP_KERNEL); - if (!work) - return NULL; - - init_completion(&work->ready); - work->out_report = report; - work->in_report = NULL; - work->raw_size = 0; - - mutex_lock(&data->mutex); - spin_lock_irqsave(&data->lock, flags); - for (i = k = 0; i < report->maxfield; i++) - for (j = 0; j < report->field[i]->report_count; j++) { - hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0); - k++; - } - data->pending = work; - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - wait_for_completion_interruptible_timeout(&work->ready, HZ*2); - spin_lock_irqsave(&data->lock, flags); - data->pending = NULL; - spin_unlock_irqrestore(&data->lock, flags); - mutex_unlock(&data->mutex); - return work; -} - -#ifdef CONFIG_HID_PICOLCD_FB -/* Send a given tile to PicoLCD */ -static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev); - struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev); - unsigned long flags; - u8 *tdata; - int i; - - if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1) - return -ENODEV; - - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report1->field[0], 0, chip << 2); - hid_set_field(report1->field[0], 1, 0x02); - hid_set_field(report1->field[0], 2, 0x00); - hid_set_field(report1->field[0], 3, 0x00); - hid_set_field(report1->field[0], 4, 0xb8 | tile); - hid_set_field(report1->field[0], 5, 0x00); - hid_set_field(report1->field[0], 6, 0x00); - hid_set_field(report1->field[0], 7, 0x40); - hid_set_field(report1->field[0], 8, 0x00); - hid_set_field(report1->field[0], 9, 0x00); - hid_set_field(report1->field[0], 10, 32); - - hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); - hid_set_field(report2->field[0], 1, 0x00); - hid_set_field(report2->field[0], 2, 0x00); - hid_set_field(report2->field[0], 3, 32); - - tdata = data->fb_vbitmap + (tile * 4 + chip) * 64; - for (i = 0; i < 64; i++) - if (i < 32) - hid_set_field(report1->field[0], 11 + i, tdata[i]); - else - hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); - - usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); - usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return 0; -} - -/* Translate a single tile*/ -static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, - int chip, int tile) -{ - int i, b, changed = 0; - u8 tdata[64]; - u8 *vdata = vbitmap + (tile * 4 + chip) * 64; - - if (bpp == 1) { - for (b = 7; b >= 0; b--) { - const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; - for (i = 0; i < 64; i++) { - tdata[i] <<= 1; - tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01; - } - } - } else if (bpp == 8) { - for (b = 7; b >= 0; b--) { - const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; - for (i = 0; i < 64; i++) { - tdata[i] <<= 1; - tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; - } - } - } else { - /* Oops, we should never get here! */ - WARN_ON(1); - return 0; - } - - for (i = 0; i < 64; i++) - if (tdata[i] != vdata[i]) { - changed = 1; - vdata[i] = tdata[i]; - } - return changed; -} - -/* Reconfigure LCD display */ -static int picolcd_fb_reset(struct picolcd_data *data, int clear) -{ - struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); - int i, j; - unsigned long flags; - static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; - - if (!report || report->maxfield != 1) - return -ENODEV; - - spin_lock_irqsave(&data->lock, flags); - for (i = 0; i < 4; i++) { - for (j = 0; j < report->field[0]->maxusage; j++) - if (j == 0) - hid_set_field(report->field[0], j, i << 2); - else if (j < sizeof(mapcmd)) - hid_set_field(report->field[0], j, mapcmd[j]); - else - hid_set_field(report->field[0], j, 0); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - } - - data->status |= PICOLCD_READY_FB; - spin_unlock_irqrestore(&data->lock, flags); - - if (data->fb_bitmap) { - if (clear) { - memset(data->fb_vbitmap, 0, PICOLCDFB_SIZE); - memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp); - } - data->fb_force = 1; - } - - /* schedule first output of framebuffer */ - if (data->fb_info) - schedule_delayed_work(&data->fb_info->deferred_work, 0); - - return 0; -} - -/* Update fb_vbitmap from the screen_base and send changed tiles to device */ -static void picolcd_fb_update(struct picolcd_data *data) -{ - int chip, tile, n; - unsigned long flags; - - if (!data) - return; - - spin_lock_irqsave(&data->lock, flags); - if (!(data->status & PICOLCD_READY_FB)) { - spin_unlock_irqrestore(&data->lock, flags); - picolcd_fb_reset(data, 0); - } else { - spin_unlock_irqrestore(&data->lock, flags); - } - - /* - * Translate the framebuffer into the format needed by the PicoLCD. - * See display layout above. - * Do this one tile after the other and push those tiles that changed. - * - * Wait for our IO to complete as otherwise we might flood the queue! - */ - n = 0; - for (chip = 0; chip < 4; chip++) - for (tile = 0; tile < 8; tile++) - if (picolcd_fb_update_tile(data->fb_vbitmap, - data->fb_bitmap, data->fb_bpp, chip, tile) || - data->fb_force) { - n += 2; - if (!data->fb_info->par) - return; /* device lost! */ - if (n >= HID_OUTPUT_FIFO_SIZE / 2) { - usbhid_wait_io(data->hdev); - n = 0; - } - picolcd_fb_send_tile(data->hdev, chip, tile); - } - data->fb_force = false; - if (n) - usbhid_wait_io(data->hdev); -} - -/* Stub to call the system default and update the image on the picoLCD */ -static void picolcd_fb_fillrect(struct fb_info *info, - const struct fb_fillrect *rect) -{ - if (!info->par) - return; - sys_fillrect(info, rect); - - schedule_delayed_work(&info->deferred_work, 0); -} - -/* Stub to call the system default and update the image on the picoLCD */ -static void picolcd_fb_copyarea(struct fb_info *info, - const struct fb_copyarea *area) -{ - if (!info->par) - return; - sys_copyarea(info, area); - - schedule_delayed_work(&info->deferred_work, 0); -} - -/* Stub to call the system default and update the image on the picoLCD */ -static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) -{ - if (!info->par) - return; - sys_imageblit(info, image); - - schedule_delayed_work(&info->deferred_work, 0); -} - -/* - * this is the slow path from userspace. they can seek and write to - * the fb. it's inefficient to do anything less than a full screen draw - */ -static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, - size_t count, loff_t *ppos) -{ - ssize_t ret; - if (!info->par) - return -ENODEV; - ret = fb_sys_write(info, buf, count, ppos); - if (ret >= 0) - schedule_delayed_work(&info->deferred_work, 0); - return ret; -} - -static int picolcd_fb_blank(int blank, struct fb_info *info) -{ - if (!info->par) - return -ENODEV; - /* We let fb notification do this for us via lcd/backlight device */ - return 0; -} - -static void picolcd_fb_destroy(struct fb_info *info) -{ - struct picolcd_data *data = info->par; - u32 *ref_cnt = info->pseudo_palette; - int may_release; - - info->par = NULL; - if (data) - data->fb_info = NULL; - fb_deferred_io_cleanup(info); - - ref_cnt--; - mutex_lock(&info->lock); - (*ref_cnt)--; - may_release = !*ref_cnt; - mutex_unlock(&info->lock); - if (may_release) { - vfree((u8 *)info->fix.smem_start); - framebuffer_release(info); - } -} - -static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) -{ - __u32 bpp = var->bits_per_pixel; - __u32 activate = var->activate; - - /* only allow 1/8 bit depth (8-bit is grayscale) */ - *var = picolcdfb_var; - var->activate = activate; - if (bpp >= 8) { - var->bits_per_pixel = 8; - var->red.length = 8; - var->green.length = 8; - var->blue.length = 8; - } else { - var->bits_per_pixel = 1; - var->red.length = 1; - var->green.length = 1; - var->blue.length = 1; - } - return 0; -} - -static int picolcd_set_par(struct fb_info *info) -{ - struct picolcd_data *data = info->par; - u8 *tmp_fb, *o_fb; - if (!data) - return -ENODEV; - if (info->var.bits_per_pixel == data->fb_bpp) - return 0; - /* switch between 1/8 bit depths */ - if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) - return -EINVAL; - - o_fb = data->fb_bitmap; - tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL); - if (!tmp_fb) - return -ENOMEM; - - /* translate FB content to new bits-per-pixel */ - if (info->var.bits_per_pixel == 1) { - int i, b; - for (i = 0; i < PICOLCDFB_SIZE; i++) { - u8 p = 0; - for (b = 0; b < 8; b++) { - p <<= 1; - p |= o_fb[i*8+b] ? 0x01 : 0x00; - } - tmp_fb[i] = p; - } - memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE); - info->fix.visual = FB_VISUAL_MONO01; - info->fix.line_length = PICOLCDFB_WIDTH / 8; - } else { - int i; - memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE); - for (i = 0; i < PICOLCDFB_SIZE * 8; i++) - o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; - info->fix.visual = FB_VISUAL_DIRECTCOLOR; - info->fix.line_length = PICOLCDFB_WIDTH; - } - - kfree(tmp_fb); - data->fb_bpp = info->var.bits_per_pixel; - return 0; -} - -/* Do refcounting on our FB and cleanup per worker if FB is - * closed after unplug of our device - * (fb_release holds info->lock and still touches info after - * we return so we can't release it immediately. - */ -struct picolcd_fb_cleanup_item { - struct fb_info *info; - struct picolcd_fb_cleanup_item *next; -}; -static struct picolcd_fb_cleanup_item *fb_pending; -static DEFINE_SPINLOCK(fb_pending_lock); - -static void picolcd_fb_do_cleanup(struct work_struct *data) -{ - struct picolcd_fb_cleanup_item *item; - unsigned long flags; - - do { - spin_lock_irqsave(&fb_pending_lock, flags); - item = fb_pending; - fb_pending = item ? item->next : NULL; - spin_unlock_irqrestore(&fb_pending_lock, flags); - - if (item) { - u8 *fb = (u8 *)item->info->fix.smem_start; - /* make sure we do not race against fb core when - * releasing */ - mutex_lock(&item->info->lock); - mutex_unlock(&item->info->lock); - framebuffer_release(item->info); - vfree(fb); - } - } while (item); -} - -static DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup); - -static int picolcd_fb_open(struct fb_info *info, int u) -{ - u32 *ref_cnt = info->pseudo_palette; - ref_cnt--; - - (*ref_cnt)++; - return 0; -} - -static int picolcd_fb_release(struct fb_info *info, int u) -{ - u32 *ref_cnt = info->pseudo_palette; - ref_cnt--; - - (*ref_cnt)++; - if (!*ref_cnt) { - unsigned long flags; - struct picolcd_fb_cleanup_item *item = (struct picolcd_fb_cleanup_item *)ref_cnt; - item--; - spin_lock_irqsave(&fb_pending_lock, flags); - item->next = fb_pending; - fb_pending = item; - spin_unlock_irqrestore(&fb_pending_lock, flags); - schedule_work(&picolcd_fb_cleanup); - } - return 0; -} - -/* Note this can't be const because of struct fb_info definition */ -static struct fb_ops picolcdfb_ops = { - .owner = THIS_MODULE, - .fb_destroy = picolcd_fb_destroy, - .fb_open = picolcd_fb_open, - .fb_release = picolcd_fb_release, - .fb_read = fb_sys_read, - .fb_write = picolcd_fb_write, - .fb_blank = picolcd_fb_blank, - .fb_fillrect = picolcd_fb_fillrect, - .fb_copyarea = picolcd_fb_copyarea, - .fb_imageblit = picolcd_fb_imageblit, - .fb_check_var = picolcd_fb_check_var, - .fb_set_par = picolcd_set_par, -}; - - -/* Callback from deferred IO workqueue */ -static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) -{ - picolcd_fb_update(info->par); -} - -static const struct fb_deferred_io picolcd_fb_defio = { - .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, - .deferred_io = picolcd_fb_deferred_io, -}; - - -/* - * The "fb_update_rate" sysfs attribute - */ -static ssize_t picolcd_fb_update_rate_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - unsigned i, fb_update_rate = data->fb_update_rate; - size_t ret = 0; - - for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) - if (ret >= PAGE_SIZE) - break; - else if (i == fb_update_rate) - ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); - else - ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); - if (ret > 0) - buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; - return ret; -} - -static ssize_t picolcd_fb_update_rate_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - int i; - unsigned u; - - if (count < 1 || count > 10) - return -EINVAL; - - i = sscanf(buf, "%u", &u); - if (i != 1) - return -EINVAL; - - if (u > PICOLCDFB_UPDATE_RATE_LIMIT) - return -ERANGE; - else if (u == 0) - u = PICOLCDFB_UPDATE_RATE_DEFAULT; - - data->fb_update_rate = u; - data->fb_defio.delay = HZ / data->fb_update_rate; - return count; -} - -static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, - picolcd_fb_update_rate_store); - -/* initialize Framebuffer device */ -static int picolcd_init_framebuffer(struct picolcd_data *data) -{ - struct device *dev = &data->hdev->dev; - struct fb_info *info = NULL; - int i, error = -ENOMEM; - u8 *fb_vbitmap = NULL; - u8 *fb_bitmap = NULL; - u32 *palette; - - fb_bitmap = vmalloc(PICOLCDFB_SIZE*8); - if (fb_bitmap == NULL) { - dev_err(dev, "can't get a free page for framebuffer\n"); - goto err_nomem; - } - - fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL); - if (fb_vbitmap == NULL) { - dev_err(dev, "can't alloc vbitmap image buffer\n"); - goto err_nomem; - } - - data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; - data->fb_defio = picolcd_fb_defio; - /* The extra memory is: - * - struct picolcd_fb_cleanup_item - * - u32 for ref_count - * - 256*u32 for pseudo_palette - */ - info = framebuffer_alloc(257 * sizeof(u32) + sizeof(struct picolcd_fb_cleanup_item), dev); - if (info == NULL) { - dev_err(dev, "failed to allocate a framebuffer\n"); - goto err_nomem; - } - - palette = info->par + sizeof(struct picolcd_fb_cleanup_item); - *palette = 1; - palette++; - for (i = 0; i < 256; i++) - palette[i] = i > 0 && i < 16 ? 0xff : 0; - info->pseudo_palette = palette; - info->fbdefio = &data->fb_defio; - info->screen_base = (char __force __iomem *)fb_bitmap; - info->fbops = &picolcdfb_ops; - info->var = picolcdfb_var; - info->fix = picolcdfb_fix; - info->fix.smem_len = PICOLCDFB_SIZE*8; - info->fix.smem_start = (unsigned long)fb_bitmap; - info->par = data; - info->flags = FBINFO_FLAG_DEFAULT; - - data->fb_vbitmap = fb_vbitmap; - data->fb_bitmap = fb_bitmap; - data->fb_bpp = picolcdfb_var.bits_per_pixel; - error = picolcd_fb_reset(data, 1); - if (error) { - dev_err(dev, "failed to configure display\n"); - goto err_cleanup; - } - error = device_create_file(dev, &dev_attr_fb_update_rate); - if (error) { - dev_err(dev, "failed to create sysfs attributes\n"); - goto err_cleanup; - } - fb_deferred_io_init(info); - data->fb_info = info; - error = register_framebuffer(info); - if (error) { - dev_err(dev, "failed to register framebuffer\n"); - goto err_sysfs; - } - /* schedule first output of framebuffer */ - data->fb_force = 1; - schedule_delayed_work(&info->deferred_work, 0); - return 0; - -err_sysfs: - fb_deferred_io_cleanup(info); - device_remove_file(dev, &dev_attr_fb_update_rate); -err_cleanup: - data->fb_vbitmap = NULL; - data->fb_bitmap = NULL; - data->fb_bpp = 0; - data->fb_info = NULL; - -err_nomem: - framebuffer_release(info); - vfree(fb_bitmap); - kfree(fb_vbitmap); - return error; -} - -static void picolcd_exit_framebuffer(struct picolcd_data *data) -{ - struct fb_info *info = data->fb_info; - u8 *fb_vbitmap = data->fb_vbitmap; - - if (!info) - return; - - info->par = NULL; - device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); - unregister_framebuffer(info); - data->fb_vbitmap = NULL; - data->fb_bitmap = NULL; - data->fb_bpp = 0; - data->fb_info = NULL; - kfree(fb_vbitmap); -} - -#define picolcd_fbinfo(d) ((d)->fb_info) -#else -static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) -{ - return 0; -} -static inline int picolcd_init_framebuffer(struct picolcd_data *data) -{ - return 0; -} -static inline void picolcd_exit_framebuffer(struct picolcd_data *data) -{ -} -#define picolcd_fbinfo(d) NULL -#endif /* CONFIG_HID_PICOLCD_FB */ - -#ifdef CONFIG_HID_PICOLCD_BACKLIGHT -/* - * backlight class device - */ -static int picolcd_get_brightness(struct backlight_device *bdev) -{ - struct picolcd_data *data = bl_get_data(bdev); - return data->lcd_brightness; -} - -static int picolcd_set_brightness(struct backlight_device *bdev) -{ - struct picolcd_data *data = bl_get_data(bdev); - struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev); - unsigned long flags; - - if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) - return -ENODEV; - - data->lcd_brightness = bdev->props.brightness & 0x0ff; - data->lcd_power = bdev->props.power; - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return 0; -} - -static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb) -{ - return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev)); -} - -static const struct backlight_ops picolcd_blops = { - .update_status = picolcd_set_brightness, - .get_brightness = picolcd_get_brightness, - .check_fb = picolcd_check_bl_fb, -}; - -static int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) -{ - struct device *dev = &data->hdev->dev; - struct backlight_device *bdev; - struct backlight_properties props; - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 1 || - report->field[0]->report_size != 8) { - dev_err(dev, "unsupported BRIGHTNESS report"); - return -EINVAL; - } - - memset(&props, 0, sizeof(props)); - props.type = BACKLIGHT_RAW; - props.max_brightness = 0xff; - bdev = backlight_device_register(dev_name(dev), dev, data, - &picolcd_blops, &props); - if (IS_ERR(bdev)) { - dev_err(dev, "failed to register backlight\n"); - return PTR_ERR(bdev); - } - bdev->props.brightness = 0xff; - data->lcd_brightness = 0xff; - data->backlight = bdev; - picolcd_set_brightness(bdev); - return 0; -} - -static void picolcd_exit_backlight(struct picolcd_data *data) -{ - struct backlight_device *bdev = data->backlight; - - data->backlight = NULL; - if (bdev) - backlight_device_unregister(bdev); -} - -static inline int picolcd_resume_backlight(struct picolcd_data *data) -{ - if (!data->backlight) - return 0; - return picolcd_set_brightness(data->backlight); -} - -#ifdef CONFIG_PM -static void picolcd_suspend_backlight(struct picolcd_data *data) -{ - int bl_power = data->lcd_power; - if (!data->backlight) - return; - - data->backlight->props.power = FB_BLANK_POWERDOWN; - picolcd_set_brightness(data->backlight); - data->lcd_power = data->backlight->props.power = bl_power; -} -#endif /* CONFIG_PM */ -#else -static inline int picolcd_init_backlight(struct picolcd_data *data, - struct hid_report *report) -{ - return 0; -} -static inline void picolcd_exit_backlight(struct picolcd_data *data) -{ -} -static inline int picolcd_resume_backlight(struct picolcd_data *data) -{ - return 0; -} -static inline void picolcd_suspend_backlight(struct picolcd_data *data) -{ -} -#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ - -#ifdef CONFIG_HID_PICOLCD_LCD -/* - * lcd class device - */ -static int picolcd_get_contrast(struct lcd_device *ldev) -{ - struct picolcd_data *data = lcd_get_data(ldev); - return data->lcd_contrast; -} - -static int picolcd_set_contrast(struct lcd_device *ldev, int contrast) -{ - struct picolcd_data *data = lcd_get_data(ldev); - struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev); - unsigned long flags; - - if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) - return -ENODEV; - - data->lcd_contrast = contrast & 0x0ff; - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, data->lcd_contrast); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return 0; -} - -static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb) -{ - return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev)); -} - -static struct lcd_ops picolcd_lcdops = { - .get_contrast = picolcd_get_contrast, - .set_contrast = picolcd_set_contrast, - .check_fb = picolcd_check_lcd_fb, -}; - -static int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report) -{ - struct device *dev = &data->hdev->dev; - struct lcd_device *ldev; - - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 1 || - report->field[0]->report_size != 8) { - dev_err(dev, "unsupported CONTRAST report"); - return -EINVAL; - } - - ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops); - if (IS_ERR(ldev)) { - dev_err(dev, "failed to register LCD\n"); - return PTR_ERR(ldev); - } - ldev->props.max_contrast = 0x0ff; - data->lcd_contrast = 0xe5; - data->lcd = ldev; - picolcd_set_contrast(ldev, 0xe5); - return 0; -} - -static void picolcd_exit_lcd(struct picolcd_data *data) -{ - struct lcd_device *ldev = data->lcd; - - data->lcd = NULL; - if (ldev) - lcd_device_unregister(ldev); -} - -static inline int picolcd_resume_lcd(struct picolcd_data *data) -{ - if (!data->lcd) - return 0; - return picolcd_set_contrast(data->lcd, data->lcd_contrast); -} -#else -static inline int picolcd_init_lcd(struct picolcd_data *data, - struct hid_report *report) -{ - return 0; -} -static inline void picolcd_exit_lcd(struct picolcd_data *data) -{ -} -static inline int picolcd_resume_lcd(struct picolcd_data *data) -{ - return 0; -} -#endif /* CONFIG_HID_PICOLCD_LCD */ - -#ifdef CONFIG_HID_PICOLCD_LEDS -/** - * LED class device - */ -static void picolcd_leds_set(struct picolcd_data *data) -{ - struct hid_report *report; - unsigned long flags; - - if (!data->led[0]) - return; - report = picolcd_out_report(REPORT_LED_STATE, data->hdev); - if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) - return; - - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, data->led_state); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); -} - -static void picolcd_led_set_brightness(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct device *dev; - struct hid_device *hdev; - struct picolcd_data *data; - int i, state = 0; - - dev = led_cdev->dev->parent; - hdev = container_of(dev, struct hid_device, dev); - data = hid_get_drvdata(hdev); - for (i = 0; i < 8; i++) { - if (led_cdev != data->led[i]) - continue; - state = (data->led_state >> i) & 1; - if (value == LED_OFF && state) { - data->led_state &= ~(1 << i); - picolcd_leds_set(data); - } else if (value != LED_OFF && !state) { - data->led_state |= 1 << i; - picolcd_leds_set(data); - } - break; - } -} - -static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev) -{ - struct device *dev; - struct hid_device *hdev; - struct picolcd_data *data; - int i, value = 0; - - dev = led_cdev->dev->parent; - hdev = container_of(dev, struct hid_device, dev); - data = hid_get_drvdata(hdev); - for (i = 0; i < 8; i++) - if (led_cdev == data->led[i]) { - value = (data->led_state >> i) & 1; - break; - } - return value ? LED_FULL : LED_OFF; -} - -static int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report) -{ - struct device *dev = &data->hdev->dev; - struct led_classdev *led; - size_t name_sz = strlen(dev_name(dev)) + 8; - char *name; - int i, ret = 0; - - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 1 || - report->field[0]->report_size != 8) { - dev_err(dev, "unsupported LED_STATE report"); - return -EINVAL; - } - - for (i = 0; i < 8; i++) { - led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL); - if (!led) { - dev_err(dev, "can't allocate memory for LED %d\n", i); - ret = -ENOMEM; - goto err; - } - name = (void *)(&led[1]); - snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i); - led->name = name; - led->brightness = 0; - led->max_brightness = 1; - led->brightness_get = picolcd_led_get_brightness; - led->brightness_set = picolcd_led_set_brightness; - - data->led[i] = led; - ret = led_classdev_register(dev, data->led[i]); - if (ret) { - data->led[i] = NULL; - kfree(led); - dev_err(dev, "can't register LED %d\n", i); - goto err; - } - } - return 0; -err: - for (i = 0; i < 8; i++) - if (data->led[i]) { - led = data->led[i]; - data->led[i] = NULL; - led_classdev_unregister(led); - kfree(led); - } - return ret; -} - -static void picolcd_exit_leds(struct picolcd_data *data) -{ - struct led_classdev *led; - int i; - - for (i = 0; i < 8; i++) { - led = data->led[i]; - data->led[i] = NULL; - if (!led) - continue; - led_classdev_unregister(led); - kfree(led); - } -} - -#else -static inline int picolcd_init_leds(struct picolcd_data *data, - struct hid_report *report) -{ - return 0; -} -static inline void picolcd_exit_leds(struct picolcd_data *data) -{ -} -static inline int picolcd_leds_set(struct picolcd_data *data) -{ - return 0; -} -#endif /* CONFIG_HID_PICOLCD_LEDS */ - -/* - * input class device - */ -static int picolcd_raw_keypad(struct picolcd_data *data, - struct hid_report *report, u8 *raw_data, int size) -{ - /* - * Keypad event - * First and second data bytes list currently pressed keys, - * 0x00 means no key and at most 2 keys may be pressed at same time - */ - int i, j; - - /* determine newly pressed keys */ - for (i = 0; i < size; i++) { - unsigned int key_code; - if (raw_data[i] == 0) - continue; - for (j = 0; j < sizeof(data->pressed_keys); j++) - if (data->pressed_keys[j] == raw_data[i]) - goto key_already_down; - for (j = 0; j < sizeof(data->pressed_keys); j++) - if (data->pressed_keys[j] == 0) { - data->pressed_keys[j] = raw_data[i]; - break; - } - input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]); - if (raw_data[i] < PICOLCD_KEYS) - key_code = data->keycode[raw_data[i]]; - else - key_code = KEY_UNKNOWN; - if (key_code != KEY_UNKNOWN) { - dbg_hid(PICOLCD_NAME " got key press for %u:%d", - raw_data[i], key_code); - input_report_key(data->input_keys, key_code, 1); - } - input_sync(data->input_keys); -key_already_down: - continue; - } - - /* determine newly released keys */ - for (j = 0; j < sizeof(data->pressed_keys); j++) { - unsigned int key_code; - if (data->pressed_keys[j] == 0) - continue; - for (i = 0; i < size; i++) - if (data->pressed_keys[j] == raw_data[i]) - goto key_still_down; - input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]); - if (data->pressed_keys[j] < PICOLCD_KEYS) - key_code = data->keycode[data->pressed_keys[j]]; - else - key_code = KEY_UNKNOWN; - if (key_code != KEY_UNKNOWN) { - dbg_hid(PICOLCD_NAME " got key release for %u:%d", - data->pressed_keys[j], key_code); - input_report_key(data->input_keys, key_code, 0); - } - input_sync(data->input_keys); - data->pressed_keys[j] = 0; -key_still_down: - continue; - } - return 1; -} - -static int picolcd_raw_cir(struct picolcd_data *data, - struct hid_report *report, u8 *raw_data, int size) -{ - /* Need understanding of CIR data format to implement ... */ - return 1; -} - -static int picolcd_check_version(struct hid_device *hdev) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct picolcd_pending *verinfo; - int ret = 0; - - if (!data) - return -ENODEV; - - verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0); - if (!verinfo) { - hid_err(hdev, "no version response from PicoLCD\n"); - return -ENODEV; - } - - if (verinfo->raw_size == 2) { - data->version[0] = verinfo->raw_data[1]; - data->version[1] = verinfo->raw_data[0]; - if (data->status & PICOLCD_BOOTLOADER) { - hid_info(hdev, "PicoLCD, bootloader version %d.%d\n", - verinfo->raw_data[1], verinfo->raw_data[0]); - } else { - hid_info(hdev, "PicoLCD, firmware version %d.%d\n", - verinfo->raw_data[1], verinfo->raw_data[0]); - } - } else { - hid_err(hdev, "confused, got unexpected version response from PicoLCD\n"); - ret = -EINVAL; - } - kfree(verinfo); - return ret; -} - -/* - * Reset our device and wait for answer to VERSION request - */ -static int picolcd_reset(struct hid_device *hdev) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); - unsigned long flags; - int error; - - if (!data || !report || report->maxfield != 1) - return -ENODEV; - - spin_lock_irqsave(&data->lock, flags); - if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) - data->status |= PICOLCD_BOOTLOADER; - - /* perform the reset */ - hid_set_field(report->field[0], 0, 1); - usbhid_submit_report(hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - - error = picolcd_check_version(hdev); - if (error) - return error; - - picolcd_resume_lcd(data); - picolcd_resume_backlight(data); -#ifdef CONFIG_HID_PICOLCD_FB - if (data->fb_info) - schedule_delayed_work(&data->fb_info->deferred_work, 0); -#endif /* CONFIG_HID_PICOLCD_FB */ - - picolcd_leds_set(data); - return 0; -} - -/* - * The "operation_mode" sysfs attribute - */ -static ssize_t picolcd_operation_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - - if (data->status & PICOLCD_BOOTLOADER) - return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); - else - return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); -} - -static ssize_t picolcd_operation_mode_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - struct hid_report *report = NULL; - size_t cnt = count; - int timeout = data->opmode_delay; - unsigned long flags; - - if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { - if (data->status & PICOLCD_BOOTLOADER) - report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev); - buf += 3; - cnt -= 3; - } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) { - if (!(data->status & PICOLCD_BOOTLOADER)) - report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev); - buf += 10; - cnt -= 10; - } - if (!report) - return -EINVAL; - - while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) - cnt--; - if (cnt != 0) - return -EINVAL; - - spin_lock_irqsave(&data->lock, flags); - hid_set_field(report->field[0], 0, timeout & 0xff); - hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff); - usbhid_submit_report(data->hdev, report, USB_DIR_OUT); - spin_unlock_irqrestore(&data->lock, flags); - return count; -} - -static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, - picolcd_operation_mode_store); - -/* - * The "operation_mode_delay" sysfs attribute - */ -static ssize_t picolcd_operation_mode_delay_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay); -} - -static ssize_t picolcd_operation_mode_delay_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct picolcd_data *data = dev_get_drvdata(dev); - unsigned u; - if (sscanf(buf, "%u", &u) != 1) - return -EINVAL; - if (u > 30000) - return -EINVAL; - else - data->opmode_delay = u; - return count; -} - -static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show, - picolcd_operation_mode_delay_store); - - -#ifdef CONFIG_DEBUG_FS -/* - * The "reset" file - */ -static int picolcd_debug_reset_show(struct seq_file *f, void *p) -{ - if (picolcd_fbinfo((struct picolcd_data *)f->private)) - seq_printf(f, "all fb\n"); - else - seq_printf(f, "all\n"); - return 0; -} - -static int picolcd_debug_reset_open(struct inode *inode, struct file *f) -{ - return single_open(f, picolcd_debug_reset_show, inode->i_private); -} - -static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; - char buf[32]; - size_t cnt = min(count, sizeof(buf)-1); - if (copy_from_user(buf, user_buf, cnt)) - return -EFAULT; - - while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) - cnt--; - buf[cnt] = '\0'; - if (strcmp(buf, "all") == 0) { - picolcd_reset(data->hdev); - picolcd_fb_reset(data, 1); - } else if (strcmp(buf, "fb") == 0) { - picolcd_fb_reset(data, 1); - } else { - return -EINVAL; - } - return count; -} - -static const struct file_operations picolcd_debug_reset_fops = { - .owner = THIS_MODULE, - .open = picolcd_debug_reset_open, - .read = seq_read, - .llseek = seq_lseek, - .write = picolcd_debug_reset_write, - .release = single_release, -}; - -/* - * The "eeprom" file - */ -static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - struct picolcd_pending *resp; - u8 raw_data[3]; - ssize_t ret = -EIO; - - if (s == 0) - return -EINVAL; - if (*off > 0x0ff) - return 0; - - /* prepare buffer with info about what we want to read (addr & len) */ - raw_data[0] = *off & 0xff; - raw_data[1] = (*off >> 8) & 0xff; - raw_data[2] = s < 20 ? s : 20; - if (*off + raw_data[2] > 0xff) - raw_data[2] = 0x100 - *off; - resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, - sizeof(raw_data)); - if (!resp) - return -EIO; - - if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { - /* successful read :) */ - ret = resp->raw_data[2]; - if (ret > s) - ret = s; - if (copy_to_user(u, resp->raw_data+3, ret)) - ret = -EFAULT; - else - *off += ret; - } /* anything else is some kind of IO error */ - - kfree(resp); - return ret; -} - -static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - struct picolcd_pending *resp; - ssize_t ret = -EIO; - u8 raw_data[23]; - - if (s == 0) - return -EINVAL; - if (*off > 0x0ff) - return -ENOSPC; - - memset(raw_data, 0, sizeof(raw_data)); - raw_data[0] = *off & 0xff; - raw_data[1] = (*off >> 8) & 0xff; - raw_data[2] = min((size_t)20, s); - if (*off + raw_data[2] > 0xff) - raw_data[2] = 0x100 - *off; - - if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) - return -EFAULT; - resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, - sizeof(raw_data)); - - if (!resp) - return -EIO; - - if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { - /* check if written data matches */ - if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { - *off += raw_data[2]; - ret = raw_data[2]; - } - } - kfree(resp); - return ret; -} - -/* - * Notes: - * - read/write happens in chunks of at most 20 bytes, it's up to userspace - * to loop in order to get more data. - * - on write errors on otherwise correct write request the bytes - * that should have been written are in undefined state. - */ -static const struct file_operations picolcd_debug_eeprom_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = picolcd_debug_eeprom_read, - .write = picolcd_debug_eeprom_write, - .llseek = generic_file_llseek, -}; - -/* - * The "flash" file - */ -/* record a flash address to buf (bounds check to be done by caller) */ -static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) -{ - buf[0] = off & 0xff; - buf[1] = (off >> 8) & 0xff; - if (data->addr_sz == 3) - buf[2] = (off >> 16) & 0xff; - return data->addr_sz == 2 ? 2 : 3; -} - -/* read a given size of data (bounds check to be done by caller) */ -static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, - char __user *u, size_t s, loff_t *off) -{ - struct picolcd_pending *resp; - u8 raw_data[4]; - ssize_t ret = 0; - int len_off, err = -EIO; - - while (s > 0) { - err = -EIO; - len_off = _picolcd_flash_setaddr(data, raw_data, *off); - raw_data[len_off] = s > 32 ? 32 : s; - resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); - if (!resp || !resp->in_report) - goto skip; - if (resp->in_report->id == REPORT_MEMORY || - resp->in_report->id == REPORT_BL_READ_MEMORY) { - if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) - goto skip; - if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { - err = -EFAULT; - goto skip; - } - *off += raw_data[len_off]; - s -= raw_data[len_off]; - ret += raw_data[len_off]; - err = 0; - } -skip: - kfree(resp); - if (err) - return ret > 0 ? ret : err; - } - return ret; -} - -static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - - if (s == 0) - return -EINVAL; - if (*off > 0x05fff) - return 0; - if (*off + s > 0x05fff) - s = 0x06000 - *off; - - if (data->status & PICOLCD_BOOTLOADER) - return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); - else - return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); -} - -/* erase block aligned to 64bytes boundary */ -static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, - loff_t *off) -{ - struct picolcd_pending *resp; - u8 raw_data[3]; - int len_off; - ssize_t ret = -EIO; - - if (*off & 0x3f) - return -EINVAL; - - len_off = _picolcd_flash_setaddr(data, raw_data, *off); - resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); - if (!resp || !resp->in_report) - goto skip; - if (resp->in_report->id == REPORT_MEMORY || - resp->in_report->id == REPORT_BL_ERASE_MEMORY) { - if (memcmp(raw_data, resp->raw_data, len_off) != 0) - goto skip; - ret = 0; - } -skip: - kfree(resp); - return ret; -} - -/* write a given size of data (bounds check to be done by caller) */ -static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, - const char __user *u, size_t s, loff_t *off) -{ - struct picolcd_pending *resp; - u8 raw_data[36]; - ssize_t ret = 0; - int len_off, err = -EIO; - - while (s > 0) { - err = -EIO; - len_off = _picolcd_flash_setaddr(data, raw_data, *off); - raw_data[len_off] = s > 32 ? 32 : s; - if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { - err = -EFAULT; - break; - } - resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, - len_off+1+raw_data[len_off]); - if (!resp || !resp->in_report) - goto skip; - if (resp->in_report->id == REPORT_MEMORY || - resp->in_report->id == REPORT_BL_WRITE_MEMORY) { - if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) - goto skip; - *off += raw_data[len_off]; - s -= raw_data[len_off]; - ret += raw_data[len_off]; - err = 0; - } -skip: - kfree(resp); - if (err) - break; - } - return ret > 0 ? ret : err; -} - -static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, - size_t s, loff_t *off) -{ - struct picolcd_data *data = f->private_data; - ssize_t err, ret = 0; - int report_erase, report_write; - - if (s == 0) - return -EINVAL; - if (*off > 0x5fff) - return -ENOSPC; - if (s & 0x3f) - return -EINVAL; - if (*off & 0x3f) - return -EINVAL; - - if (data->status & PICOLCD_BOOTLOADER) { - report_erase = REPORT_BL_ERASE_MEMORY; - report_write = REPORT_BL_WRITE_MEMORY; - } else { - report_erase = REPORT_ERASE_MEMORY; - report_write = REPORT_WRITE_MEMORY; - } - mutex_lock(&data->mutex_flash); - while (s > 0) { - err = _picolcd_flash_erase64(data, report_erase, off); - if (err) - break; - err = _picolcd_flash_write(data, report_write, u, 64, off); - if (err < 0) - break; - ret += err; - *off += err; - s -= err; - if (err != 64) - break; - } - mutex_unlock(&data->mutex_flash); - return ret > 0 ? ret : err; -} - -/* - * Notes: - * - concurrent writing is prevented by mutex and all writes must be - * n*64 bytes and 64-byte aligned, each write being preceded by an - * ERASE which erases a 64byte block. - * If less than requested was written or an error is returned for an - * otherwise correct write request the next 64-byte block which should - * have been written is in undefined state (mostly: original, erased, - * (half-)written with write error) - * - reading can happen without special restriction - */ -static const struct file_operations picolcd_debug_flash_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = picolcd_debug_flash_read, - .write = picolcd_debug_flash_write, - .llseek = generic_file_llseek, -}; - - -/* - * Helper code for HID report level dumping/debugging - */ -static const char *error_codes[] = { - "success", "parameter missing", "data_missing", "block readonly", - "block not erasable", "block too big", "section overflow", - "invalid command length", "invalid data length", -}; - -static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, - const size_t data_len) -{ - int i, j; - for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) { - dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; - dst[j++] = hex_asc[data[i] & 0x0f]; - dst[j++] = ' '; - } - if (j < dst_sz) { - dst[j--] = '\0'; - dst[j] = '\n'; - } else - dst[j] = '\0'; -} - -static void picolcd_debug_out_report(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report) -{ - u8 raw_data[70]; - int raw_size = (report->size >> 3) + 1; - char *buff; -#define BUFF_SZ 256 - - /* Avoid unnecessary overhead if debugfs is disabled */ - if (list_empty(&hdev->debug_list)) - return; - - buff = kmalloc(BUFF_SZ, GFP_ATOMIC); - if (!buff) - return; - - snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", - report->id, raw_size); - hid_debug_event(hdev, buff); - if (raw_size + 5 > sizeof(raw_data)) { - kfree(buff); - hid_debug_event(hdev, " TOO BIG\n"); - return; - } else { - raw_data[0] = report->id; - hid_output_report(report, raw_data); - dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); - hid_debug_event(hdev, buff); - } - - switch (report->id) { - case REPORT_LED_STATE: - /* 1 data byte with GPO state */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LED_STATE", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_BRIGHTNESS: - /* 1 data byte with brightness */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_BRIGHTNESS", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_CONTRAST: - /* 1 data byte with contrast */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_CONTRAST", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_RESET: - /* 2 data bytes with reset duration in ms */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_RESET", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", - raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_LCD_CMD: - /* 63 data bytes with LCD commands */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LCD_CMD", report->id, raw_size-1); - hid_debug_event(hdev, buff); - /* TODO: format decoding */ - break; - case REPORT_LCD_DATA: - /* 63 data bytes with LCD data */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LCD_CMD", report->id, raw_size-1); - /* TODO: format decoding */ - hid_debug_event(hdev, buff); - break; - case REPORT_LCD_CMD_DATA: - /* 63 data bytes with LCD commands and data */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_LCD_CMD", report->id, raw_size-1); - /* TODO: format decoding */ - hid_debug_event(hdev, buff); - break; - case REPORT_EE_READ: - /* 3 data bytes with read area description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_EE_READ", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - break; - case REPORT_EE_WRITE: - /* 3+1..20 data bytes with write area description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_EE_WRITE", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[3] + 4 <= raw_size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_ERASE_MEMORY: - case REPORT_BL_ERASE_MEMORY: - /* 3 data bytes with pointer inside erase block */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_ERASE_MEMORY", report->id, raw_size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - break; - case 3: - snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_READ_MEMORY: - case REPORT_BL_READ_MEMORY: - /* 4 data bytes with read area description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_READ_MEMORY", report->id, raw_size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - break; - case 3: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_WRITE_MEMORY: - case REPORT_BL_WRITE_MEMORY: - /* 4+1..32 data bytes with write adrea description */ - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_WRITE_MEMORY", report->id, raw_size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[3] + 4 <= raw_size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - case 3: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); - hid_debug_event(hdev, buff); - if (raw_data[4] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[4] + 5 <= raw_size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_SPLASH_RESTART: - /* TODO */ - break; - case REPORT_EXIT_KEYBOARD: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", - raw_data[1] | (raw_data[2] << 8), - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_VERSION: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_VERSION", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_DEVID: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_DEVID", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_SPLASH_SIZE: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_SPLASH_SIZE", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_HOOK_VERSION: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_HOOK_VERSION", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - case REPORT_EXIT_FLASHER: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "REPORT_VERSION", report->id, raw_size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", - raw_data[1] | (raw_data[2] << 8), - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - default: - snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", - "<unknown>", report->id, raw_size-1); - hid_debug_event(hdev, buff); - break; - } - wake_up_interruptible(&hdev->debug_wait); - kfree(buff); -} - -static void picolcd_debug_raw_event(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report, - u8 *raw_data, int size) -{ - char *buff; - -#define BUFF_SZ 256 - /* Avoid unnecessary overhead if debugfs is disabled */ - if (!hdev->debug_events) - return; - - buff = kmalloc(BUFF_SZ, GFP_ATOMIC); - if (!buff) - return; - - switch (report->id) { - case REPORT_ERROR_CODE: - /* 2 data bytes with affected report and error code */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_ERROR_CODE", report->id, size-1); - hid_debug_event(hdev, buff); - if (raw_data[2] < ARRAY_SIZE(error_codes)) - snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", - raw_data[2], error_codes[raw_data[2]], raw_data[1]); - else - snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_KEY_STATE: - /* 2 data bytes with key state */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_KEY_STATE", report->id, size-1); - hid_debug_event(hdev, buff); - if (raw_data[1] == 0) - snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); - else if (raw_data[2] == 0) - snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", - raw_data[1], raw_data[1]); - else - snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", - raw_data[1], raw_data[1], raw_data[2], raw_data[2]); - hid_debug_event(hdev, buff); - break; - case REPORT_IR_DATA: - /* Up to 20 byes of IR scancode data */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_IR_DATA", report->id, size-1); - hid_debug_event(hdev, buff); - if (raw_data[1] == 0) { - snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); - hid_debug_event(hdev, buff); - } else if (raw_data[1] + 1 <= size) { - snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", - raw_data[1]-1); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1); - hid_debug_event(hdev, buff); - } else { - snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", - raw_data[1]-1); - hid_debug_event(hdev, buff); - } - break; - case REPORT_EE_DATA: - /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_EE_DATA", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - hid_debug_event(hdev, buff); - } else if (raw_data[3] + 4 <= size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - hid_debug_event(hdev, buff); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - hid_debug_event(hdev, buff); - } - break; - case REPORT_MEMORY: - /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - switch (data->addr_sz) { - case 2: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); - hid_debug_event(hdev, buff); - if (raw_data[3] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[3] + 4 <= size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - case 3: - snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", - raw_data[3], raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); - hid_debug_event(hdev, buff); - if (raw_data[4] == 0) { - snprintf(buff, BUFF_SZ, "\tNo data\n"); - } else if (raw_data[4] + 5 <= size) { - snprintf(buff, BUFF_SZ, "\tData: "); - hid_debug_event(hdev, buff); - dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); - } else { - snprintf(buff, BUFF_SZ, "\tData overflowed\n"); - } - break; - default: - snprintf(buff, BUFF_SZ, "\tNot supported\n"); - } - hid_debug_event(hdev, buff); - break; - case REPORT_VERSION: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_VERSION", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", - raw_data[2], raw_data[1]); - hid_debug_event(hdev, buff); - break; - case REPORT_BL_ERASE_MEMORY: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_BL_ERASE_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - /* TODO */ - break; - case REPORT_BL_READ_MEMORY: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_BL_READ_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - /* TODO */ - break; - case REPORT_BL_WRITE_MEMORY: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_BL_WRITE_MEMORY", report->id, size-1); - hid_debug_event(hdev, buff); - /* TODO */ - break; - case REPORT_DEVID: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_DEVID", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", - raw_data[1], raw_data[2], raw_data[3], raw_data[4]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", - raw_data[5]); - hid_debug_event(hdev, buff); - break; - case REPORT_SPLASH_SIZE: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_SPLASH_SIZE", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", - (raw_data[2] << 8) | raw_data[1]); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", - (raw_data[4] << 8) | raw_data[3]); - hid_debug_event(hdev, buff); - break; - case REPORT_HOOK_VERSION: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "REPORT_HOOK_VERSION", report->id, size-1); - hid_debug_event(hdev, buff); - snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", - raw_data[1], raw_data[2]); - hid_debug_event(hdev, buff); - break; - default: - snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", - "<unknown>", report->id, size-1); - hid_debug_event(hdev, buff); - break; - } - wake_up_interruptible(&hdev->debug_wait); - kfree(buff); -} - -static void picolcd_init_devfs(struct picolcd_data *data, - struct hid_report *eeprom_r, struct hid_report *eeprom_w, - struct hid_report *flash_r, struct hid_report *flash_w, - struct hid_report *reset) -{ - struct hid_device *hdev = data->hdev; - - mutex_init(&data->mutex_flash); - - /* reset */ - if (reset) - data->debug_reset = debugfs_create_file("reset", 0600, - hdev->debug_dir, data, &picolcd_debug_reset_fops); - - /* eeprom */ - if (eeprom_r || eeprom_w) - data->debug_eeprom = debugfs_create_file("eeprom", - (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), - hdev->debug_dir, data, &picolcd_debug_eeprom_fops); - - /* flash */ - if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) - data->addr_sz = flash_r->field[0]->report_count - 1; - else - data->addr_sz = -1; - if (data->addr_sz == 2 || data->addr_sz == 3) { - data->debug_flash = debugfs_create_file("flash", - (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), - hdev->debug_dir, data, &picolcd_debug_flash_fops); - } else if (flash_r || flash_w) - hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); -} - -static void picolcd_exit_devfs(struct picolcd_data *data) -{ - struct dentry *dent; - - dent = data->debug_reset; - data->debug_reset = NULL; - if (dent) - debugfs_remove(dent); - dent = data->debug_eeprom; - data->debug_eeprom = NULL; - if (dent) - debugfs_remove(dent); - dent = data->debug_flash; - data->debug_flash = NULL; - if (dent) - debugfs_remove(dent); - mutex_destroy(&data->mutex_flash); -} -#else -static inline void picolcd_debug_raw_event(struct picolcd_data *data, - struct hid_device *hdev, struct hid_report *report, - u8 *raw_data, int size) -{ -} -static inline void picolcd_init_devfs(struct picolcd_data *data, - struct hid_report *eeprom_r, struct hid_report *eeprom_w, - struct hid_report *flash_r, struct hid_report *flash_w, - struct hid_report *reset) -{ -} -static inline void picolcd_exit_devfs(struct picolcd_data *data) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -/* - * Handle raw report as sent by device - */ -static int picolcd_raw_event(struct hid_device *hdev, - struct hid_report *report, u8 *raw_data, int size) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - unsigned long flags; - int ret = 0; - - if (!data) - return 1; - - if (report->id == REPORT_KEY_STATE) { - if (data->input_keys) - ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); - } else if (report->id == REPORT_IR_DATA) { - if (data->input_cir) - ret = picolcd_raw_cir(data, report, raw_data+1, size-1); - } else { - spin_lock_irqsave(&data->lock, flags); - /* - * We let the caller of picolcd_send_and_wait() check if the - * report we got is one of the expected ones or not. - */ - if (data->pending) { - memcpy(data->pending->raw_data, raw_data+1, size-1); - data->pending->raw_size = size-1; - data->pending->in_report = report; - complete(&data->pending->ready); - } - spin_unlock_irqrestore(&data->lock, flags); - } - - picolcd_debug_raw_event(data, hdev, report, raw_data, size); - return 1; -} - -#ifdef CONFIG_PM -static int picolcd_suspend(struct hid_device *hdev, pm_message_t message) -{ - if (PMSG_IS_AUTO(message)) - return 0; - - picolcd_suspend_backlight(hid_get_drvdata(hdev)); - dbg_hid(PICOLCD_NAME " device ready for suspend\n"); - return 0; -} - -static int picolcd_resume(struct hid_device *hdev) -{ - int ret; - ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); - if (ret) - dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); - return 0; -} - -static int picolcd_reset_resume(struct hid_device *hdev) -{ - int ret; - ret = picolcd_reset(hdev); - if (ret) - dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret); - ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0); - if (ret) - dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret); - ret = picolcd_resume_lcd(hid_get_drvdata(hdev)); - if (ret) - dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret); - ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); - if (ret) - dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); - picolcd_leds_set(hid_get_drvdata(hdev)); - return 0; -} -#endif - -/* initialize keypad input device */ -static int picolcd_init_keys(struct picolcd_data *data, - struct hid_report *report) -{ - struct hid_device *hdev = data->hdev; - struct input_dev *idev; - int error, i; - - if (!report) - return -ENODEV; - if (report->maxfield != 1 || report->field[0]->report_count != 2 || - report->field[0]->report_size != 8) { - hid_err(hdev, "unsupported KEY_STATE report\n"); - return -EINVAL; - } - - idev = input_allocate_device(); - if (idev == NULL) { - hid_err(hdev, "failed to allocate input device\n"); - return -ENOMEM; - } - input_set_drvdata(idev, hdev); - memcpy(data->keycode, def_keymap, sizeof(def_keymap)); - idev->name = hdev->name; - idev->phys = hdev->phys; - idev->uniq = hdev->uniq; - idev->id.bustype = hdev->bus; - idev->id.vendor = hdev->vendor; - idev->id.product = hdev->product; - idev->id.version = hdev->version; - idev->dev.parent = hdev->dev.parent; - idev->keycode = &data->keycode; - idev->keycodemax = PICOLCD_KEYS; - idev->keycodesize = sizeof(data->keycode[0]); - input_set_capability(idev, EV_MSC, MSC_SCAN); - set_bit(EV_REP, idev->evbit); - for (i = 0; i < PICOLCD_KEYS; i++) - input_set_capability(idev, EV_KEY, data->keycode[i]); - error = input_register_device(idev); - if (error) { - hid_err(hdev, "error registering the input device\n"); - input_free_device(idev); - return error; - } - data->input_keys = idev; - return 0; -} - -static void picolcd_exit_keys(struct picolcd_data *data) -{ - struct input_dev *idev = data->input_keys; - - data->input_keys = NULL; - if (idev) - input_unregister_device(idev); -} - -/* initialize CIR input device */ -static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) -{ - /* support not implemented yet */ - return 0; -} - -static inline void picolcd_exit_cir(struct picolcd_data *data) -{ -} - -static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) -{ - int error; - - error = picolcd_check_version(hdev); - if (error) - return error; - - if (data->version[0] != 0 && data->version[1] != 3) - hid_info(hdev, "Device with untested firmware revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", - dev_name(&hdev->dev)); - - /* Setup keypad input device */ - error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev)); - if (error) - goto err; - - /* Setup CIR input device */ - error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev)); - if (error) - goto err; - - /* Set up the framebuffer device */ - error = picolcd_init_framebuffer(data); - if (error) - goto err; - - /* Setup lcd class device */ - error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev)); - if (error) - goto err; - - /* Setup backlight class device */ - error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); - if (error) - goto err; - - /* Setup the LED class devices */ - error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev)); - if (error) - goto err; - - picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev), - picolcd_out_report(REPORT_EE_WRITE, hdev), - picolcd_out_report(REPORT_READ_MEMORY, hdev), - picolcd_out_report(REPORT_WRITE_MEMORY, hdev), - picolcd_out_report(REPORT_RESET, hdev)); - return 0; -err: - picolcd_exit_leds(data); - picolcd_exit_backlight(data); - picolcd_exit_lcd(data); - picolcd_exit_framebuffer(data); - picolcd_exit_cir(data); - picolcd_exit_keys(data); - return error; -} - -static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) -{ - int error; - - error = picolcd_check_version(hdev); - if (error) - return error; - - if (data->version[0] != 1 && data->version[1] != 0) - hid_info(hdev, "Device with untested bootloader revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", - dev_name(&hdev->dev)); - - picolcd_init_devfs(data, NULL, NULL, - picolcd_out_report(REPORT_BL_READ_MEMORY, hdev), - picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL); - return 0; -} - -static int picolcd_probe(struct hid_device *hdev, - const struct hid_device_id *id) -{ - struct picolcd_data *data; - int error = -ENOMEM; - - dbg_hid(PICOLCD_NAME " hardware probe...\n"); - - /* - * Let's allocate the picolcd data structure, set some reasonable - * defaults, and associate it with the device - */ - data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); - if (data == NULL) { - hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n"); - error = -ENOMEM; - goto err_no_cleanup; - } - - spin_lock_init(&data->lock); - mutex_init(&data->mutex); - data->hdev = hdev; - data->opmode_delay = 5000; - if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) - data->status |= PICOLCD_BOOTLOADER; - hid_set_drvdata(hdev, data); - - /* Parse the device reports and start it up */ - error = hid_parse(hdev); - if (error) { - hid_err(hdev, "device report parse failed\n"); - goto err_cleanup_data; - } - - error = hid_hw_start(hdev, 0); - if (error) { - hid_err(hdev, "hardware start failed\n"); - goto err_cleanup_data; - } - - error = hid_hw_open(hdev); - if (error) { - hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n"); - goto err_cleanup_hid_hw; - } - - error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); - if (error) { - hid_err(hdev, "failed to create sysfs attributes\n"); - goto err_cleanup_hid_ll; - } - - error = device_create_file(&hdev->dev, &dev_attr_operation_mode); - if (error) { - hid_err(hdev, "failed to create sysfs attributes\n"); - goto err_cleanup_sysfs1; - } - - if (data->status & PICOLCD_BOOTLOADER) - error = picolcd_probe_bootloader(hdev, data); - else - error = picolcd_probe_lcd(hdev, data); - if (error) - goto err_cleanup_sysfs2; - - dbg_hid(PICOLCD_NAME " activated and initialized\n"); - return 0; - -err_cleanup_sysfs2: - device_remove_file(&hdev->dev, &dev_attr_operation_mode); -err_cleanup_sysfs1: - device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); -err_cleanup_hid_ll: - hid_hw_close(hdev); -err_cleanup_hid_hw: - hid_hw_stop(hdev); -err_cleanup_data: - kfree(data); -err_no_cleanup: - hid_set_drvdata(hdev, NULL); - - return error; -} - -static void picolcd_remove(struct hid_device *hdev) -{ - struct picolcd_data *data = hid_get_drvdata(hdev); - unsigned long flags; - - dbg_hid(PICOLCD_NAME " hardware remove...\n"); - spin_lock_irqsave(&data->lock, flags); - data->status |= PICOLCD_FAILED; - spin_unlock_irqrestore(&data->lock, flags); -#ifdef CONFIG_HID_PICOLCD_FB - /* short-circuit FB as early as possible in order to - * avoid long delays if we host console. - */ - if (data->fb_info) - data->fb_info->par = NULL; -#endif - - picolcd_exit_devfs(data); - device_remove_file(&hdev->dev, &dev_attr_operation_mode); - device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); - hid_hw_close(hdev); - hid_hw_stop(hdev); - hid_set_drvdata(hdev, NULL); - - /* Shortcut potential pending reply that will never arrive */ - spin_lock_irqsave(&data->lock, flags); - if (data->pending) - complete(&data->pending->ready); - spin_unlock_irqrestore(&data->lock, flags); - - /* Cleanup LED */ - picolcd_exit_leds(data); - /* Clean up the framebuffer */ - picolcd_exit_backlight(data); - picolcd_exit_lcd(data); - picolcd_exit_framebuffer(data); - /* Cleanup input */ - picolcd_exit_cir(data); - picolcd_exit_keys(data); - - mutex_destroy(&data->mutex); - /* Finally, clean up the picolcd data itself */ - kfree(data); -} - -static const struct hid_device_id picolcd_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, - { } -}; -MODULE_DEVICE_TABLE(hid, picolcd_devices); - -static struct hid_driver picolcd_driver = { - .name = "hid-picolcd", - .id_table = picolcd_devices, - .probe = picolcd_probe, - .remove = picolcd_remove, - .raw_event = picolcd_raw_event, -#ifdef CONFIG_PM - .suspend = picolcd_suspend, - .resume = picolcd_resume, - .reset_resume = picolcd_reset_resume, -#endif -}; - -static int __init picolcd_init(void) -{ - return hid_register_driver(&picolcd_driver); -} - -static void __exit picolcd_exit(void) -{ - hid_unregister_driver(&picolcd_driver); -#ifdef CONFIG_HID_PICOLCD_FB - flush_work_sync(&picolcd_fb_cleanup); - WARN_ON(fb_pending); -#endif -} - -module_init(picolcd_init); -module_exit(picolcd_exit); -MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-picolcd.h b/drivers/hid/hid-picolcd.h new file mode 100644 index 000000000000..020cef69f6a1 --- /dev/null +++ b/drivers/hid/hid-picolcd.h @@ -0,0 +1,309 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#define PICOLCD_NAME "PicoLCD (graphic)" + +/* Report numbers */ +#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */ +#define ERR_SUCCESS 0x00 +#define ERR_PARAMETER_MISSING 0x01 +#define ERR_DATA_MISSING 0x02 +#define ERR_BLOCK_READ_ONLY 0x03 +#define ERR_BLOCK_NOT_ERASABLE 0x04 +#define ERR_BLOCK_TOO_BIG 0x05 +#define ERR_SECTION_OVERFLOW 0x06 +#define ERR_INVALID_CMD_LEN 0x07 +#define ERR_INVALID_DATA_LEN 0x08 +#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */ +#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */ +#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */ +#define REPORT_MEMORY 0x41 /* LCD: IN[63] */ +#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */ +#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */ +#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */ +#define REPORT_RESET 0x93 /* LCD: OUT[2] */ +#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */ +#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */ +#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */ +#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */ +#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */ +#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */ +#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */ +#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */ +#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */ +#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */ +#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ +#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ +#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ +#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */ +#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ +#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ + +/* Description of in-progress IO operation, used for operations + * that trigger response from device */ +struct picolcd_pending { + struct hid_report *out_report; + struct hid_report *in_report; + struct completion ready; + int raw_size; + u8 raw_data[64]; +}; + + +#define PICOLCD_KEYS 17 + +/* Per device data structure */ +struct picolcd_data { + struct hid_device *hdev; +#ifdef CONFIG_DEBUG_FS + struct dentry *debug_reset; + struct dentry *debug_eeprom; + struct dentry *debug_flash; + struct mutex mutex_flash; + int addr_sz; +#endif + u8 version[2]; + unsigned short opmode_delay; + /* input stuff */ + u8 pressed_keys[2]; + struct input_dev *input_keys; +#ifdef CONFIG_HID_PICOLCD_CIR + struct rc_dev *rc_dev; +#endif + unsigned short keycode[PICOLCD_KEYS]; + +#ifdef CONFIG_HID_PICOLCD_FB + /* Framebuffer stuff */ + struct fb_info *fb_info; +#endif /* CONFIG_HID_PICOLCD_FB */ +#ifdef CONFIG_HID_PICOLCD_LCD + struct lcd_device *lcd; + u8 lcd_contrast; +#endif /* CONFIG_HID_PICOLCD_LCD */ +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT + struct backlight_device *backlight; + u8 lcd_brightness; + u8 lcd_power; +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ +#ifdef CONFIG_HID_PICOLCD_LEDS + /* LED stuff */ + u8 led_state; + struct led_classdev *led[8]; +#endif /* CONFIG_HID_PICOLCD_LEDS */ + + /* Housekeeping stuff */ + spinlock_t lock; + struct mutex mutex; + struct picolcd_pending *pending; + int status; +#define PICOLCD_BOOTLOADER 1 +#define PICOLCD_FAILED 2 +#define PICOLCD_CIR_SHUN 4 +}; + +#ifdef CONFIG_HID_PICOLCD_FB +struct picolcd_fb_data { + /* Framebuffer stuff */ + spinlock_t lock; + struct picolcd_data *picolcd; + u8 update_rate; + u8 bpp; + u8 force; + u8 ready; + u8 *vbitmap; /* local copy of what was sent to PicoLCD */ + u8 *bitmap; /* framebuffer */ +}; +#endif /* CONFIG_HID_PICOLCD_FB */ + +/* Find a given report */ +#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT) +#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT) + +struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir); + +#ifdef CONFIG_DEBUG_FS +void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report); +#define usbhid_submit_report(a, b, c) \ + do { \ + picolcd_debug_out_report(hid_get_drvdata(a), a, b); \ + usbhid_submit_report(a, b, c); \ + } while (0) + +void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size); + +void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset); + +void picolcd_exit_devfs(struct picolcd_data *data); +#else +static inline void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report) +{ +} +static inline void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ +} +static inline void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ +} +static inline void picolcd_exit_devfs(struct picolcd_data *data) +{ +} +#endif /* CONFIG_DEBUG_FS */ + + +#ifdef CONFIG_HID_PICOLCD_FB +int picolcd_fb_reset(struct picolcd_data *data, int clear); + +int picolcd_init_framebuffer(struct picolcd_data *data); + +void picolcd_exit_framebuffer(struct picolcd_data *data); + +void picolcd_fb_refresh(struct picolcd_data *data); +#define picolcd_fbinfo(d) ((d)->fb_info) +#else +static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + return 0; +} +static inline int picolcd_init_framebuffer(struct picolcd_data *data) +{ + return 0; +} +static inline void picolcd_exit_framebuffer(struct picolcd_data *data) +{ +} +static inline void picolcd_fb_refresh(struct picolcd_data *data) +{ +} +#define picolcd_fbinfo(d) NULL +#endif /* CONFIG_HID_PICOLCD_FB */ + + +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT +int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_backlight(struct picolcd_data *data); + +int picolcd_resume_backlight(struct picolcd_data *data); + +void picolcd_suspend_backlight(struct picolcd_data *data); +#else +static inline int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_backlight(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_backlight(struct picolcd_data *data) +{ + return 0; +} +static inline void picolcd_suspend_backlight(struct picolcd_data *data) +{ +} + +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ + + +#ifdef CONFIG_HID_PICOLCD_LCD +int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_lcd(struct picolcd_data *data); + +int picolcd_resume_lcd(struct picolcd_data *data); +#else +static inline int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_lcd(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_lcd(struct picolcd_data *data) +{ + return 0; +} +#endif /* CONFIG_HID_PICOLCD_LCD */ + + +#ifdef CONFIG_HID_PICOLCD_LEDS +int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_leds(struct picolcd_data *data); + +void picolcd_leds_set(struct picolcd_data *data); +#else +static inline int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_leds(struct picolcd_data *data) +{ +} +static inline void picolcd_leds_set(struct picolcd_data *data) +{ +} +#endif /* CONFIG_HID_PICOLCD_LEDS */ + + +#ifdef CONFIG_HID_PICOLCD_CIR +int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size); + +int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report); + +void picolcd_exit_cir(struct picolcd_data *data); +#else +static inline int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + return 1; +} +static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_cir(struct picolcd_data *data) +{ +} +#endif /* CONFIG_HID_PICOLCD_LIRC */ + +int picolcd_reset(struct hid_device *hdev); +struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size); diff --git a/drivers/hid/hid-picolcd_backlight.c b/drivers/hid/hid-picolcd_backlight.c new file mode 100644 index 000000000000..b91f30945f9c --- /dev/null +++ b/drivers/hid/hid-picolcd_backlight.c @@ -0,0 +1,122 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/backlight.h> + +#include "hid-picolcd.h" + +static int picolcd_get_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + return data->lcd_brightness; +} + +static int picolcd_set_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_brightness = bdev->props.brightness & 0x0ff; + data->lcd_power = bdev->props.power; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0); + if (!(data->status & PICOLCD_FAILED)) + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev)); +} + +static const struct backlight_ops picolcd_blops = { + .update_status = picolcd_set_brightness, + .get_brightness = picolcd_get_brightness, + .check_fb = picolcd_check_bl_fb, +}; + +int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct backlight_device *bdev; + struct backlight_properties props; + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported BRIGHTNESS report"); + return -EINVAL; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 0xff; + bdev = backlight_device_register(dev_name(dev), dev, data, + &picolcd_blops, &props); + if (IS_ERR(bdev)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bdev); + } + bdev->props.brightness = 0xff; + data->lcd_brightness = 0xff; + data->backlight = bdev; + picolcd_set_brightness(bdev); + return 0; +} + +void picolcd_exit_backlight(struct picolcd_data *data) +{ + struct backlight_device *bdev = data->backlight; + + data->backlight = NULL; + if (bdev) + backlight_device_unregister(bdev); +} + +int picolcd_resume_backlight(struct picolcd_data *data) +{ + if (!data->backlight) + return 0; + return picolcd_set_brightness(data->backlight); +} + +#ifdef CONFIG_PM +void picolcd_suspend_backlight(struct picolcd_data *data) +{ + int bl_power = data->lcd_power; + if (!data->backlight) + return; + + data->backlight->props.power = FB_BLANK_POWERDOWN; + picolcd_set_brightness(data->backlight); + data->lcd_power = data->backlight->props.power = bl_power; +} +#endif /* CONFIG_PM */ + diff --git a/drivers/hid/hid-picolcd_cir.c b/drivers/hid/hid-picolcd_cir.c new file mode 100644 index 000000000000..13ca9191b630 --- /dev/null +++ b/drivers/hid/hid-picolcd_cir.c @@ -0,0 +1,152 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <linux/leds.h> + +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <media/rc-core.h> + +#include "hid-picolcd.h" + + +int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + unsigned long flags; + int i, w, sz; + DEFINE_IR_RAW_EVENT(rawir); + + /* ignore if rc_dev is NULL or status is shunned */ + spin_lock_irqsave(&data->lock, flags); + if (!data->rc_dev || (data->status & PICOLCD_CIR_SHUN)) { + spin_unlock_irqrestore(&data->lock, flags); + return 1; + } + spin_unlock_irqrestore(&data->lock, flags); + + /* PicoLCD USB packets contain 16-bit intervals in network order, + * with value negated for pulse. Intervals are in microseconds. + * + * Note: some userspace LIRC code for PicoLCD says negated values + * for space - is it a matter of IR chip? (pulse for my TSOP2236) + * + * In addition, the first interval seems to be around 15000 + base + * interval for non-first report of IR data - thus the quirk below + * to get RC_CODE to understand Sony and JVC remotes I have at hand + */ + sz = size > 0 ? min((int)raw_data[0], size-1) : 0; + for (i = 0; i+1 < sz; i += 2) { + init_ir_raw_event(&rawir); + w = (raw_data[i] << 8) | (raw_data[i+1]); + rawir.pulse = !!(w & 0x8000); + rawir.duration = US_TO_NS(rawir.pulse ? (65536 - w) : w); + /* Quirk!! - see above */ + if (i == 0 && rawir.duration > 15000000) + rawir.duration -= 15000000; + ir_raw_event_store(data->rc_dev, &rawir); + } + ir_raw_event_handle(data->rc_dev); + + return 1; +} + +static int picolcd_cir_open(struct rc_dev *dev) +{ + struct picolcd_data *data = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + data->status &= ~PICOLCD_CIR_SHUN; + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static void picolcd_cir_close(struct rc_dev *dev) +{ + struct picolcd_data *data = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + data->status |= PICOLCD_CIR_SHUN; + spin_unlock_irqrestore(&data->lock, flags); +} + +/* initialize CIR input device */ +int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + struct rc_dev *rdev; + int ret = 0; + + rdev = rc_allocate_device(); + if (!rdev) + return -ENOMEM; + + rdev->priv = data; + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protos = RC_TYPE_ALL; + rdev->open = picolcd_cir_open; + rdev->close = picolcd_cir_close; + rdev->input_name = data->hdev->name; + rdev->input_phys = data->hdev->phys; + rdev->input_id.bustype = data->hdev->bus; + rdev->input_id.vendor = data->hdev->vendor; + rdev->input_id.product = data->hdev->product; + rdev->input_id.version = data->hdev->version; + rdev->dev.parent = &data->hdev->dev; + rdev->driver_name = PICOLCD_NAME; + rdev->map_name = RC_MAP_RC6_MCE; + rdev->timeout = MS_TO_NS(100); + rdev->rx_resolution = US_TO_NS(1); + + ret = rc_register_device(rdev); + if (ret) + goto err; + data->rc_dev = rdev; + return 0; + +err: + rc_free_device(rdev); + return ret; +} + +void picolcd_exit_cir(struct picolcd_data *data) +{ + struct rc_dev *rdev = data->rc_dev; + + data->rc_dev = NULL; + rc_unregister_device(rdev); +} + diff --git a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c new file mode 100644 index 000000000000..86df26e58aba --- /dev/null +++ b/drivers/hid/hid-picolcd_core.c @@ -0,0 +1,689 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +/* Input device + * + * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys + * and header for 4x4 key matrix. The built-in keys are part of the matrix. + */ +static const unsigned short def_keymap[PICOLCD_KEYS] = { + KEY_RESERVED, /* none */ + KEY_BACK, /* col 4 + row 1 */ + KEY_HOMEPAGE, /* col 3 + row 1 */ + KEY_RESERVED, /* col 2 + row 1 */ + KEY_RESERVED, /* col 1 + row 1 */ + KEY_SCROLLUP, /* col 4 + row 2 */ + KEY_OK, /* col 3 + row 2 */ + KEY_SCROLLDOWN, /* col 2 + row 2 */ + KEY_RESERVED, /* col 1 + row 2 */ + KEY_RESERVED, /* col 4 + row 3 */ + KEY_RESERVED, /* col 3 + row 3 */ + KEY_RESERVED, /* col 2 + row 3 */ + KEY_RESERVED, /* col 1 + row 3 */ + KEY_RESERVED, /* col 4 + row 4 */ + KEY_RESERVED, /* col 3 + row 4 */ + KEY_RESERVED, /* col 2 + row 4 */ + KEY_RESERVED, /* col 1 + row 4 */ +}; + + +/* Find a given report */ +struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir) +{ + struct list_head *feature_report_list = &hdev->report_enum[dir].report_list; + struct hid_report *report = NULL; + + list_for_each_entry(report, feature_report_list, list) { + if (report->id == id) + return report; + } + hid_warn(hdev, "No report with id 0x%x found\n", id); + return NULL; +} + +/* Submit a report and wait for a reply from device - if device fades away + * or does not respond in time, return NULL */ +struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *work; + struct hid_report *report = picolcd_out_report(report_id, hdev); + unsigned long flags; + int i, j, k; + + if (!report || !data) + return NULL; + if (data->status & PICOLCD_FAILED) + return NULL; + work = kzalloc(sizeof(*work), GFP_KERNEL); + if (!work) + return NULL; + + init_completion(&work->ready); + work->out_report = report; + work->in_report = NULL; + work->raw_size = 0; + + mutex_lock(&data->mutex); + spin_lock_irqsave(&data->lock, flags); + for (i = k = 0; i < report->maxfield; i++) + for (j = 0; j < report->field[i]->report_count; j++) { + hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0); + k++; + } + if (data->status & PICOLCD_FAILED) { + kfree(work); + work = NULL; + } else { + data->pending = work; + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + wait_for_completion_interruptible_timeout(&work->ready, HZ*2); + spin_lock_irqsave(&data->lock, flags); + data->pending = NULL; + } + spin_unlock_irqrestore(&data->lock, flags); + mutex_unlock(&data->mutex); + return work; +} + +/* + * input class device + */ +static int picolcd_raw_keypad(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + /* + * Keypad event + * First and second data bytes list currently pressed keys, + * 0x00 means no key and at most 2 keys may be pressed at same time + */ + int i, j; + + /* determine newly pressed keys */ + for (i = 0; i < size; i++) { + unsigned int key_code; + if (raw_data[i] == 0) + continue; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_already_down; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == 0) { + data->pressed_keys[j] = raw_data[i]; + break; + } + input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]); + if (raw_data[i] < PICOLCD_KEYS) + key_code = data->keycode[raw_data[i]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key press for %u:%d", + raw_data[i], key_code); + input_report_key(data->input_keys, key_code, 1); + } + input_sync(data->input_keys); +key_already_down: + continue; + } + + /* determine newly released keys */ + for (j = 0; j < sizeof(data->pressed_keys); j++) { + unsigned int key_code; + if (data->pressed_keys[j] == 0) + continue; + for (i = 0; i < size; i++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_still_down; + input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]); + if (data->pressed_keys[j] < PICOLCD_KEYS) + key_code = data->keycode[data->pressed_keys[j]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key release for %u:%d", + data->pressed_keys[j], key_code); + input_report_key(data->input_keys, key_code, 0); + } + input_sync(data->input_keys); + data->pressed_keys[j] = 0; +key_still_down: + continue; + } + return 1; +} + +static int picolcd_check_version(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *verinfo; + int ret = 0; + + if (!data) + return -ENODEV; + + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0); + if (!verinfo) { + hid_err(hdev, "no version response from PicoLCD\n"); + return -ENODEV; + } + + if (verinfo->raw_size == 2) { + data->version[0] = verinfo->raw_data[1]; + data->version[1] = verinfo->raw_data[0]; + if (data->status & PICOLCD_BOOTLOADER) { + hid_info(hdev, "PicoLCD, bootloader version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + } else { + hid_info(hdev, "PicoLCD, firmware version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + } + } else { + hid_err(hdev, "confused, got unexpected version response from PicoLCD\n"); + ret = -EINVAL; + } + kfree(verinfo); + return ret; +} + +/* + * Reset our device and wait for answer to VERSION request + */ +int picolcd_reset(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); + unsigned long flags; + int error; + + if (!data || !report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + + /* perform the reset */ + hid_set_field(report->field[0], 0, 1); + if (data->status & PICOLCD_FAILED) { + spin_unlock_irqrestore(&data->lock, flags); + return -ENODEV; + } + usbhid_submit_report(hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + + error = picolcd_check_version(hdev); + if (error) + return error; + + picolcd_resume_lcd(data); + picolcd_resume_backlight(data); + picolcd_fb_refresh(data); + picolcd_leds_set(data); + return 0; +} + +/* + * The "operation_mode" sysfs attribute + */ +static ssize_t picolcd_operation_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + if (data->status & PICOLCD_BOOTLOADER) + return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); + else + return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); +} + +static ssize_t picolcd_operation_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct hid_report *report = NULL; + size_t cnt = count; + int timeout = data->opmode_delay; + unsigned long flags; + + if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { + if (data->status & PICOLCD_BOOTLOADER) + report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev); + buf += 3; + cnt -= 3; + } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) { + if (!(data->status & PICOLCD_BOOTLOADER)) + report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev); + buf += 10; + cnt -= 10; + } + if (!report) + return -EINVAL; + + while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) + cnt--; + if (cnt != 0) + return -EINVAL; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, timeout & 0xff); + hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return count; +} + +static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, + picolcd_operation_mode_store); + +/* + * The "operation_mode_delay" sysfs attribute + */ +static ssize_t picolcd_operation_mode_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay); +} + +static ssize_t picolcd_operation_mode_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned u; + if (sscanf(buf, "%u", &u) != 1) + return -EINVAL; + if (u > 30000) + return -EINVAL; + else + data->opmode_delay = u; + return count; +} + +static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show, + picolcd_operation_mode_delay_store); + +/* + * Handle raw report as sent by device + */ +static int picolcd_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + int ret = 0; + + if (!data) + return 1; + + if (report->id == REPORT_KEY_STATE) { + if (data->input_keys) + ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); + } else if (report->id == REPORT_IR_DATA) { + ret = picolcd_raw_cir(data, report, raw_data+1, size-1); + } else { + spin_lock_irqsave(&data->lock, flags); + /* + * We let the caller of picolcd_send_and_wait() check if the + * report we got is one of the expected ones or not. + */ + if (data->pending) { + memcpy(data->pending->raw_data, raw_data+1, size-1); + data->pending->raw_size = size-1; + data->pending->in_report = report; + complete(&data->pending->ready); + } + spin_unlock_irqrestore(&data->lock, flags); + } + + picolcd_debug_raw_event(data, hdev, report, raw_data, size); + return 1; +} + +#ifdef CONFIG_PM +static int picolcd_suspend(struct hid_device *hdev, pm_message_t message) +{ + if (PMSG_IS_AUTO(message)) + return 0; + + picolcd_suspend_backlight(hid_get_drvdata(hdev)); + dbg_hid(PICOLCD_NAME " device ready for suspend\n"); + return 0; +} + +static int picolcd_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + return 0; +} + +static int picolcd_reset_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_reset(hdev); + if (ret) + dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret); + ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0); + if (ret) + dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret); + ret = picolcd_resume_lcd(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret); + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + picolcd_leds_set(hid_get_drvdata(hdev)); + return 0; +} +#endif + +/* initialize keypad input device */ +static int picolcd_init_keys(struct picolcd_data *data, + struct hid_report *report) +{ + struct hid_device *hdev = data->hdev; + struct input_dev *idev; + int error, i; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 2 || + report->field[0]->report_size != 8) { + hid_err(hdev, "unsupported KEY_STATE report\n"); + return -EINVAL; + } + + idev = input_allocate_device(); + if (idev == NULL) { + hid_err(hdev, "failed to allocate input device\n"); + return -ENOMEM; + } + input_set_drvdata(idev, hdev); + memcpy(data->keycode, def_keymap, sizeof(def_keymap)); + idev->name = hdev->name; + idev->phys = hdev->phys; + idev->uniq = hdev->uniq; + idev->id.bustype = hdev->bus; + idev->id.vendor = hdev->vendor; + idev->id.product = hdev->product; + idev->id.version = hdev->version; + idev->dev.parent = &hdev->dev; + idev->keycode = &data->keycode; + idev->keycodemax = PICOLCD_KEYS; + idev->keycodesize = sizeof(data->keycode[0]); + input_set_capability(idev, EV_MSC, MSC_SCAN); + set_bit(EV_REP, idev->evbit); + for (i = 0; i < PICOLCD_KEYS; i++) + input_set_capability(idev, EV_KEY, data->keycode[i]); + error = input_register_device(idev); + if (error) { + hid_err(hdev, "error registering the input device\n"); + input_free_device(idev); + return error; + } + data->input_keys = idev; + return 0; +} + +static void picolcd_exit_keys(struct picolcd_data *data) +{ + struct input_dev *idev = data->input_keys; + + data->input_keys = NULL; + if (idev) + input_unregister_device(idev); +} + +static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) +{ + int error; + + /* Setup keypad input device */ + error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev)); + if (error) + goto err; + + /* Setup CIR input device */ + error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev)); + if (error) + goto err; + + /* Set up the framebuffer device */ + error = picolcd_init_framebuffer(data); + if (error) + goto err; + + /* Setup lcd class device */ + error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev)); + if (error) + goto err; + + /* Setup backlight class device */ + error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); + if (error) + goto err; + + /* Setup the LED class devices */ + error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev)); + if (error) + goto err; + + picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev), + picolcd_out_report(REPORT_EE_WRITE, hdev), + picolcd_out_report(REPORT_READ_MEMORY, hdev), + picolcd_out_report(REPORT_WRITE_MEMORY, hdev), + picolcd_out_report(REPORT_RESET, hdev)); + return 0; +err: + picolcd_exit_leds(data); + picolcd_exit_backlight(data); + picolcd_exit_lcd(data); + picolcd_exit_framebuffer(data); + picolcd_exit_cir(data); + picolcd_exit_keys(data); + return error; +} + +static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) +{ + picolcd_init_devfs(data, NULL, NULL, + picolcd_out_report(REPORT_BL_READ_MEMORY, hdev), + picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL); + return 0; +} + +static int picolcd_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct picolcd_data *data; + int error = -ENOMEM; + + dbg_hid(PICOLCD_NAME " hardware probe...\n"); + + /* + * Let's allocate the picolcd data structure, set some reasonable + * defaults, and associate it with the device + */ + data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); + if (data == NULL) { + hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n"); + error = -ENOMEM; + goto err_no_cleanup; + } + + spin_lock_init(&data->lock); + mutex_init(&data->mutex); + data->hdev = hdev; + data->opmode_delay = 5000; + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + hid_set_drvdata(hdev, data); + + /* Parse the device reports and start it up */ + error = hid_parse(hdev); + if (error) { + hid_err(hdev, "device report parse failed\n"); + goto err_cleanup_data; + } + + error = hid_hw_start(hdev, 0); + if (error) { + hid_err(hdev, "hardware start failed\n"); + goto err_cleanup_data; + } + + error = hid_hw_open(hdev); + if (error) { + hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n"); + goto err_cleanup_hid_hw; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); + if (error) { + hid_err(hdev, "failed to create sysfs attributes\n"); + goto err_cleanup_hid_ll; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode); + if (error) { + hid_err(hdev, "failed to create sysfs attributes\n"); + goto err_cleanup_sysfs1; + } + + if (data->status & PICOLCD_BOOTLOADER) + error = picolcd_probe_bootloader(hdev, data); + else + error = picolcd_probe_lcd(hdev, data); + if (error) + goto err_cleanup_sysfs2; + + dbg_hid(PICOLCD_NAME " activated and initialized\n"); + return 0; + +err_cleanup_sysfs2: + device_remove_file(&hdev->dev, &dev_attr_operation_mode); +err_cleanup_sysfs1: + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); +err_cleanup_hid_ll: + hid_hw_close(hdev); +err_cleanup_hid_hw: + hid_hw_stop(hdev); +err_cleanup_data: + kfree(data); +err_no_cleanup: + hid_set_drvdata(hdev, NULL); + + return error; +} + +static void picolcd_remove(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + + dbg_hid(PICOLCD_NAME " hardware remove...\n"); + spin_lock_irqsave(&data->lock, flags); + data->status |= PICOLCD_FAILED; + spin_unlock_irqrestore(&data->lock, flags); + + picolcd_exit_devfs(data); + device_remove_file(&hdev->dev, &dev_attr_operation_mode); + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); + hid_hw_close(hdev); + hid_hw_stop(hdev); + + /* Shortcut potential pending reply that will never arrive */ + spin_lock_irqsave(&data->lock, flags); + if (data->pending) + complete(&data->pending->ready); + spin_unlock_irqrestore(&data->lock, flags); + + /* Cleanup LED */ + picolcd_exit_leds(data); + /* Clean up the framebuffer */ + picolcd_exit_backlight(data); + picolcd_exit_lcd(data); + picolcd_exit_framebuffer(data); + /* Cleanup input */ + picolcd_exit_cir(data); + picolcd_exit_keys(data); + + hid_set_drvdata(hdev, NULL); + mutex_destroy(&data->mutex); + /* Finally, clean up the picolcd data itself */ + kfree(data); +} + +static const struct hid_device_id picolcd_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, + { } +}; +MODULE_DEVICE_TABLE(hid, picolcd_devices); + +static struct hid_driver picolcd_driver = { + .name = "hid-picolcd", + .id_table = picolcd_devices, + .probe = picolcd_probe, + .remove = picolcd_remove, + .raw_event = picolcd_raw_event, +#ifdef CONFIG_PM + .suspend = picolcd_suspend, + .resume = picolcd_resume, + .reset_resume = picolcd_reset_resume, +#endif +}; + +static int __init picolcd_init(void) +{ + return hid_register_driver(&picolcd_driver); +} + +static void __exit picolcd_exit(void) +{ + hid_unregister_driver(&picolcd_driver); +} + +module_init(picolcd_init); +module_exit(picolcd_exit); +MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-picolcd_debugfs.c b/drivers/hid/hid-picolcd_debugfs.c new file mode 100644 index 000000000000..4809aa1bdb9c --- /dev/null +++ b/drivers/hid/hid-picolcd_debugfs.c @@ -0,0 +1,899 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/module.h> +#include <linux/uaccess.h> + +#include "hid-picolcd.h" + + +static int picolcd_debug_reset_show(struct seq_file *f, void *p) +{ + if (picolcd_fbinfo((struct picolcd_data *)f->private)) + seq_printf(f, "all fb\n"); + else + seq_printf(f, "all\n"); + return 0; +} + +static int picolcd_debug_reset_open(struct inode *inode, struct file *f) +{ + return single_open(f, picolcd_debug_reset_show, inode->i_private); +} + +static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; + char buf[32]; + size_t cnt = min(count, sizeof(buf)-1); + if (copy_from_user(buf, user_buf, cnt)) + return -EFAULT; + + while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) + cnt--; + buf[cnt] = '\0'; + if (strcmp(buf, "all") == 0) { + picolcd_reset(data->hdev); + picolcd_fb_reset(data, 1); + } else if (strcmp(buf, "fb") == 0) { + picolcd_fb_reset(data, 1); + } else { + return -EINVAL; + } + return count; +} + +static const struct file_operations picolcd_debug_reset_fops = { + .owner = THIS_MODULE, + .open = picolcd_debug_reset_open, + .read = seq_read, + .llseek = seq_lseek, + .write = picolcd_debug_reset_write, + .release = single_release, +}; + +/* + * The "eeprom" file + */ +static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + u8 raw_data[3]; + ssize_t ret = -EIO; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return 0; + + /* prepare buffer with info about what we want to read (addr & len) */ + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) & 0xff; + raw_data[2] = s < 20 ? s : 20; + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, + sizeof(raw_data)); + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* successful read :) */ + ret = resp->raw_data[2]; + if (ret > s) + ret = s; + if (copy_to_user(u, resp->raw_data+3, ret)) + ret = -EFAULT; + else + *off += ret; + } /* anything else is some kind of IO error */ + + kfree(resp); + return ret; +} + +static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + ssize_t ret = -EIO; + u8 raw_data[23]; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return -ENOSPC; + + memset(raw_data, 0, sizeof(raw_data)); + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) & 0xff; + raw_data[2] = min_t(size_t, 20, s); + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + + if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) + return -EFAULT; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, + sizeof(raw_data)); + + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* check if written data matches */ + if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { + *off += raw_data[2]; + ret = raw_data[2]; + } + } + kfree(resp); + return ret; +} + +/* + * Notes: + * - read/write happens in chunks of at most 20 bytes, it's up to userspace + * to loop in order to get more data. + * - on write errors on otherwise correct write request the bytes + * that should have been written are in undefined state. + */ +static const struct file_operations picolcd_debug_eeprom_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = picolcd_debug_eeprom_read, + .write = picolcd_debug_eeprom_write, + .llseek = generic_file_llseek, +}; + +/* + * The "flash" file + */ +/* record a flash address to buf (bounds check to be done by caller) */ +static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) +{ + buf[0] = off & 0xff; + buf[1] = (off >> 8) & 0xff; + if (data->addr_sz == 3) + buf[2] = (off >> 16) & 0xff; + return data->addr_sz == 2 ? 2 : 3; +} + +/* read a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, + char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[4]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_READ_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) + goto skip; + if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { + err = -EFAULT; + goto skip; + } + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + return ret > 0 ? ret : err; + } + return ret; +} + +static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + + if (s == 0) + return -EINVAL; + if (*off > 0x05fff) + return 0; + if (*off + s > 0x05fff) + s = 0x06000 - *off; + + if (data->status & PICOLCD_BOOTLOADER) + return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); + else + return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); +} + +/* erase block aligned to 64bytes boundary */ +static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, + loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[3]; + int len_off; + ssize_t ret = -EIO; + + if (*off & 0x3f) + return -EINVAL; + + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_ERASE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off) != 0) + goto skip; + ret = 0; + } +skip: + kfree(resp); + return ret; +} + +/* write a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, + const char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[36]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { + err = -EFAULT; + break; + } + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, + len_off+1+raw_data[len_off]); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_WRITE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) + goto skip; + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + break; + } + return ret > 0 ? ret : err; +} + +static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + ssize_t err, ret = 0; + int report_erase, report_write; + + if (s == 0) + return -EINVAL; + if (*off > 0x5fff) + return -ENOSPC; + if (s & 0x3f) + return -EINVAL; + if (*off & 0x3f) + return -EINVAL; + + if (data->status & PICOLCD_BOOTLOADER) { + report_erase = REPORT_BL_ERASE_MEMORY; + report_write = REPORT_BL_WRITE_MEMORY; + } else { + report_erase = REPORT_ERASE_MEMORY; + report_write = REPORT_WRITE_MEMORY; + } + mutex_lock(&data->mutex_flash); + while (s > 0) { + err = _picolcd_flash_erase64(data, report_erase, off); + if (err) + break; + err = _picolcd_flash_write(data, report_write, u, 64, off); + if (err < 0) + break; + ret += err; + *off += err; + s -= err; + if (err != 64) + break; + } + mutex_unlock(&data->mutex_flash); + return ret > 0 ? ret : err; +} + +/* + * Notes: + * - concurrent writing is prevented by mutex and all writes must be + * n*64 bytes and 64-byte aligned, each write being preceded by an + * ERASE which erases a 64byte block. + * If less than requested was written or an error is returned for an + * otherwise correct write request the next 64-byte block which should + * have been written is in undefined state (mostly: original, erased, + * (half-)written with write error) + * - reading can happen without special restriction + */ +static const struct file_operations picolcd_debug_flash_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = picolcd_debug_flash_read, + .write = picolcd_debug_flash_write, + .llseek = generic_file_llseek, +}; + + +/* + * Helper code for HID report level dumping/debugging + */ +static const char * const error_codes[] = { + "success", "parameter missing", "data_missing", "block readonly", + "block not erasable", "block too big", "section overflow", + "invalid command length", "invalid data length", +}; + +static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, + const size_t data_len) +{ + int i, j; + for (i = j = 0; i < data_len && j + 4 < dst_sz; i++) { + dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; + dst[j++] = hex_asc[data[i] & 0x0f]; + dst[j++] = ' '; + } + dst[j] = '\0'; + if (j > 0) + dst[j-1] = '\n'; + if (i < data_len && j > 2) + dst[j-2] = dst[j-3] = '.'; +} + +void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report) +{ + u8 raw_data[70]; + int raw_size = (report->size >> 3) + 1; + char *buff; +#define BUFF_SZ 256 + + /* Avoid unnecessary overhead if debugfs is disabled */ + if (list_empty(&hdev->debug_list)) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", + report->id, raw_size); + hid_debug_event(hdev, buff); + if (raw_size + 5 > sizeof(raw_data)) { + kfree(buff); + hid_debug_event(hdev, " TOO BIG\n"); + return; + } else { + raw_data[0] = report->id; + hid_output_report(report, raw_data); + dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); + hid_debug_event(hdev, buff); + } + + switch (report->id) { + case REPORT_LED_STATE: + /* 1 data byte with GPO state */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LED_STATE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BRIGHTNESS: + /* 1 data byte with brightness */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_BRIGHTNESS", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_CONTRAST: + /* 1 data byte with contrast */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_CONTRAST", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_RESET: + /* 2 data bytes with reset duration in ms */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_RESET", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", + raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD: + /* 63 data bytes with LCD commands */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + /* TODO: format decoding */ + break; + case REPORT_LCD_DATA: + /* 63 data bytes with LCD data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD_DATA: + /* 63 data bytes with LCD commands and data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_EE_READ: + /* 3 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_READ", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_EE_WRITE: + /* 3+1..20 data bytes with write area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_WRITE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_ERASE_MEMORY: + case REPORT_BL_ERASE_MEMORY: + /* 3 data bytes with pointer inside erase block */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_ERASE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_READ_MEMORY: + case REPORT_BL_READ_MEMORY: + /* 4 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_READ_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_WRITE_MEMORY: + case REPORT_BL_WRITE_MEMORY: + /* 4+1..32 data bytes with write adrea description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_WRITE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_RESTART: + /* TODO */ + break; + case REPORT_EXIT_KEYBOARD: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_EXIT_FLASHER: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "<unknown>", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ + char *buff; + +#define BUFF_SZ 256 + /* Avoid unnecessary overhead if debugfs is disabled */ + if (list_empty(&hdev->debug_list)) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + switch (report->id) { + case REPORT_ERROR_CODE: + /* 2 data bytes with affected report and error code */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_ERROR_CODE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[2] < ARRAY_SIZE(error_codes)) + snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", + raw_data[2], error_codes[raw_data[2]], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_KEY_STATE: + /* 2 data bytes with key state */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_KEY_STATE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) + snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); + else if (raw_data[2] == 0) + snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", + raw_data[1], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", + raw_data[1], raw_data[1], raw_data[2], raw_data[2]); + hid_debug_event(hdev, buff); + break; + case REPORT_IR_DATA: + /* Up to 20 byes of IR scancode data */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_IR_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) { + snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[1] + 1 <= size) { + snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", + raw_data[1]); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", + raw_data[1]-1); + hid_debug_event(hdev, buff); + } + break; + case REPORT_EE_DATA: + /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_EE_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + hid_debug_event(hdev, buff); + } + break; + case REPORT_MEMORY: + /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BL_ERASE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_ERASE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_READ_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_READ_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_WRITE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_WRITE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", + raw_data[1], raw_data[2], raw_data[3], raw_data[4]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", + raw_data[5]); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", + (raw_data[2] << 8) | raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", + (raw_data[4] << 8) | raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[1], raw_data[2]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "<unknown>", report->id, size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ + struct hid_device *hdev = data->hdev; + + mutex_init(&data->mutex_flash); + + /* reset */ + if (reset) + data->debug_reset = debugfs_create_file("reset", 0600, + hdev->debug_dir, data, &picolcd_debug_reset_fops); + + /* eeprom */ + if (eeprom_r || eeprom_w) + data->debug_eeprom = debugfs_create_file("eeprom", + (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_eeprom_fops); + + /* flash */ + if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) + data->addr_sz = flash_r->field[0]->report_count - 1; + else + data->addr_sz = -1; + if (data->addr_sz == 2 || data->addr_sz == 3) { + data->debug_flash = debugfs_create_file("flash", + (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_flash_fops); + } else if (flash_r || flash_w) + hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); +} + +void picolcd_exit_devfs(struct picolcd_data *data) +{ + struct dentry *dent; + + dent = data->debug_reset; + data->debug_reset = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_eeprom; + data->debug_eeprom = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_flash; + data->debug_flash = NULL; + if (dent) + debugfs_remove(dent); + mutex_destroy(&data->mutex_flash); +} + diff --git a/drivers/hid/hid-picolcd_fb.c b/drivers/hid/hid-picolcd_fb.c new file mode 100644 index 000000000000..0008a512211d --- /dev/null +++ b/drivers/hid/hid-picolcd_fb.c @@ -0,0 +1,615 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/vmalloc.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + +/* Framebuffer + * + * The PicoLCD use a Topway LCD module of 256x64 pixel + * This display area is tiled over 4 controllers with 8 tiles + * each. Each tile has 8x64 pixel, each data byte representing + * a 1-bit wide vertical line of the tile. + * + * The display can be updated at a tile granularity. + * + * Chip 1 Chip 2 Chip 3 Chip 4 + * +----------------+----------------+----------------+----------------+ + * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | + * +----------------+----------------+----------------+----------------+ + * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | + * +----------------+----------------+----------------+----------------+ + * ... + * +----------------+----------------+----------------+----------------+ + * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | + * +----------------+----------------+----------------+----------------+ + */ +#define PICOLCDFB_NAME "picolcdfb" +#define PICOLCDFB_WIDTH (256) +#define PICOLCDFB_HEIGHT (64) +#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) + +#define PICOLCDFB_UPDATE_RATE_LIMIT 10 +#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 + +/* Framebuffer visual structures */ +static const struct fb_fix_screeninfo picolcdfb_fix = { + .id = PICOLCDFB_NAME, + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .line_length = PICOLCDFB_WIDTH / 8, + .accel = FB_ACCEL_NONE, +}; + +static const struct fb_var_screeninfo picolcdfb_var = { + .xres = PICOLCDFB_WIDTH, + .yres = PICOLCDFB_HEIGHT, + .xres_virtual = PICOLCDFB_WIDTH, + .yres_virtual = PICOLCDFB_HEIGHT, + .width = 103, + .height = 26, + .bits_per_pixel = 1, + .grayscale = 1, + .red = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .green = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .blue = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .transp = { + .offset = 0, + .length = 0, + .msb_right = 0, + }, +}; + +/* Send a given tile to PicoLCD */ +static int picolcd_fb_send_tile(struct picolcd_data *data, u8 *vbitmap, + int chip, int tile) +{ + struct hid_report *report1, *report2; + unsigned long flags; + u8 *tdata; + int i; + + report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, data->hdev); + if (!report1 || report1->maxfield != 1) + return -ENODEV; + report2 = picolcd_out_report(REPORT_LCD_DATA, data->hdev); + if (!report2 || report2->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + if ((data->status & PICOLCD_FAILED)) { + spin_unlock_irqrestore(&data->lock, flags); + return -ENODEV; + } + hid_set_field(report1->field[0], 0, chip << 2); + hid_set_field(report1->field[0], 1, 0x02); + hid_set_field(report1->field[0], 2, 0x00); + hid_set_field(report1->field[0], 3, 0x00); + hid_set_field(report1->field[0], 4, 0xb8 | tile); + hid_set_field(report1->field[0], 5, 0x00); + hid_set_field(report1->field[0], 6, 0x00); + hid_set_field(report1->field[0], 7, 0x40); + hid_set_field(report1->field[0], 8, 0x00); + hid_set_field(report1->field[0], 9, 0x00); + hid_set_field(report1->field[0], 10, 32); + + hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); + hid_set_field(report2->field[0], 1, 0x00); + hid_set_field(report2->field[0], 2, 0x00); + hid_set_field(report2->field[0], 3, 32); + + tdata = vbitmap + (tile * 4 + chip) * 64; + for (i = 0; i < 64; i++) + if (i < 32) + hid_set_field(report1->field[0], 11 + i, tdata[i]); + else + hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); + + usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); + usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +/* Translate a single tile*/ +static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, + int chip, int tile) +{ + int i, b, changed = 0; + u8 tdata[64]; + u8 *vdata = vbitmap + (tile * 4 + chip) * 64; + + if (bpp == 1) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01; + } + } + } else if (bpp == 8) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; + } + } + } else { + /* Oops, we should never get here! */ + WARN_ON(1); + return 0; + } + + for (i = 0; i < 64; i++) + if (tdata[i] != vdata[i]) { + changed = 1; + vdata[i] = tdata[i]; + } + return changed; +} + +void picolcd_fb_refresh(struct picolcd_data *data) +{ + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); +} + +/* Reconfigure LCD display */ +int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); + struct picolcd_fb_data *fbdata = data->fb_info->par; + int i, j; + unsigned long flags; + static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; + + if (!report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + for (i = 0; i < 4; i++) { + for (j = 0; j < report->field[0]->maxusage; j++) + if (j == 0) + hid_set_field(report->field[0], j, i << 2); + else if (j < sizeof(mapcmd)) + hid_set_field(report->field[0], j, mapcmd[j]); + else + hid_set_field(report->field[0], j, 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + } + spin_unlock_irqrestore(&data->lock, flags); + + if (clear) { + memset(fbdata->vbitmap, 0, PICOLCDFB_SIZE); + memset(fbdata->bitmap, 0, PICOLCDFB_SIZE*fbdata->bpp); + } + fbdata->force = 1; + + /* schedule first output of framebuffer */ + if (fbdata->ready) + schedule_delayed_work(&data->fb_info->deferred_work, 0); + else + fbdata->ready = 1; + + return 0; +} + +/* Update fb_vbitmap from the screen_base and send changed tiles to device */ +static void picolcd_fb_update(struct fb_info *info) +{ + int chip, tile, n; + unsigned long flags; + struct picolcd_fb_data *fbdata = info->par; + struct picolcd_data *data; + + mutex_lock(&info->lock); + + spin_lock_irqsave(&fbdata->lock, flags); + if (!fbdata->ready && fbdata->picolcd) + picolcd_fb_reset(fbdata->picolcd, 0); + spin_unlock_irqrestore(&fbdata->lock, flags); + + /* + * Translate the framebuffer into the format needed by the PicoLCD. + * See display layout above. + * Do this one tile after the other and push those tiles that changed. + * + * Wait for our IO to complete as otherwise we might flood the queue! + */ + n = 0; + for (chip = 0; chip < 4; chip++) + for (tile = 0; tile < 8; tile++) { + if (!fbdata->force && !picolcd_fb_update_tile( + fbdata->vbitmap, fbdata->bitmap, + fbdata->bpp, chip, tile)) + continue; + n += 2; + if (n >= HID_OUTPUT_FIFO_SIZE / 2) { + spin_lock_irqsave(&fbdata->lock, flags); + data = fbdata->picolcd; + spin_unlock_irqrestore(&fbdata->lock, flags); + mutex_unlock(&info->lock); + if (!data) + return; + usbhid_wait_io(data->hdev); + mutex_lock(&info->lock); + n = 0; + } + spin_lock_irqsave(&fbdata->lock, flags); + data = fbdata->picolcd; + spin_unlock_irqrestore(&fbdata->lock, flags); + if (!data || picolcd_fb_send_tile(data, + fbdata->vbitmap, chip, tile)) + goto out; + } + fbdata->force = false; + if (n) { + spin_lock_irqsave(&fbdata->lock, flags); + data = fbdata->picolcd; + spin_unlock_irqrestore(&fbdata->lock, flags); + mutex_unlock(&info->lock); + if (data) + usbhid_wait_io(data->hdev); + return; + } +out: + mutex_unlock(&info->lock); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + if (!info->par) + return; + sys_fillrect(info, rect); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + if (!info->par) + return; + sys_copyarea(info, area); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + if (!info->par) + return; + sys_imageblit(info, image); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + if (!info->par) + return -ENODEV; + ret = fb_sys_write(info, buf, count, ppos); + if (ret >= 0) + schedule_delayed_work(&info->deferred_work, 0); + return ret; +} + +static int picolcd_fb_blank(int blank, struct fb_info *info) +{ + /* We let fb notification do this for us via lcd/backlight device */ + return 0; +} + +static void picolcd_fb_destroy(struct fb_info *info) +{ + struct picolcd_fb_data *fbdata = info->par; + + /* make sure no work is deferred */ + fb_deferred_io_cleanup(info); + + /* No thridparty should ever unregister our framebuffer! */ + WARN_ON(fbdata->picolcd != NULL); + + vfree((u8 *)info->fix.smem_start); + framebuffer_release(info); +} + +static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + __u32 bpp = var->bits_per_pixel; + __u32 activate = var->activate; + + /* only allow 1/8 bit depth (8-bit is grayscale) */ + *var = picolcdfb_var; + var->activate = activate; + if (bpp >= 8) { + var->bits_per_pixel = 8; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + } else { + var->bits_per_pixel = 1; + var->red.length = 1; + var->green.length = 1; + var->blue.length = 1; + } + return 0; +} + +static int picolcd_set_par(struct fb_info *info) +{ + struct picolcd_fb_data *fbdata = info->par; + u8 *tmp_fb, *o_fb; + if (info->var.bits_per_pixel == fbdata->bpp) + return 0; + /* switch between 1/8 bit depths */ + if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) + return -EINVAL; + + o_fb = fbdata->bitmap; + tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL); + if (!tmp_fb) + return -ENOMEM; + + /* translate FB content to new bits-per-pixel */ + if (info->var.bits_per_pixel == 1) { + int i, b; + for (i = 0; i < PICOLCDFB_SIZE; i++) { + u8 p = 0; + for (b = 0; b < 8; b++) { + p <<= 1; + p |= o_fb[i*8+b] ? 0x01 : 0x00; + } + tmp_fb[i] = p; + } + memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE); + info->fix.visual = FB_VISUAL_MONO01; + info->fix.line_length = PICOLCDFB_WIDTH / 8; + } else { + int i; + memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE); + for (i = 0; i < PICOLCDFB_SIZE * 8; i++) + o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; + info->fix.visual = FB_VISUAL_DIRECTCOLOR; + info->fix.line_length = PICOLCDFB_WIDTH; + } + + kfree(tmp_fb); + fbdata->bpp = info->var.bits_per_pixel; + return 0; +} + +/* Note this can't be const because of struct fb_info definition */ +static struct fb_ops picolcdfb_ops = { + .owner = THIS_MODULE, + .fb_destroy = picolcd_fb_destroy, + .fb_read = fb_sys_read, + .fb_write = picolcd_fb_write, + .fb_blank = picolcd_fb_blank, + .fb_fillrect = picolcd_fb_fillrect, + .fb_copyarea = picolcd_fb_copyarea, + .fb_imageblit = picolcd_fb_imageblit, + .fb_check_var = picolcd_fb_check_var, + .fb_set_par = picolcd_set_par, +}; + + +/* Callback from deferred IO workqueue */ +static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) +{ + picolcd_fb_update(info); +} + +static const struct fb_deferred_io picolcd_fb_defio = { + .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, + .deferred_io = picolcd_fb_deferred_io, +}; + + +/* + * The "fb_update_rate" sysfs attribute + */ +static ssize_t picolcd_fb_update_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct picolcd_fb_data *fbdata = data->fb_info->par; + unsigned i, fb_update_rate = fbdata->update_rate; + size_t ret = 0; + + for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) + if (ret >= PAGE_SIZE) + break; + else if (i == fb_update_rate) + ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); + else + ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); + if (ret > 0) + buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; + return ret; +} + +static ssize_t picolcd_fb_update_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct picolcd_fb_data *fbdata = data->fb_info->par; + int i; + unsigned u; + + if (count < 1 || count > 10) + return -EINVAL; + + i = sscanf(buf, "%u", &u); + if (i != 1) + return -EINVAL; + + if (u > PICOLCDFB_UPDATE_RATE_LIMIT) + return -ERANGE; + else if (u == 0) + u = PICOLCDFB_UPDATE_RATE_DEFAULT; + + fbdata->update_rate = u; + data->fb_info->fbdefio->delay = HZ / fbdata->update_rate; + return count; +} + +static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, + picolcd_fb_update_rate_store); + +/* initialize Framebuffer device */ +int picolcd_init_framebuffer(struct picolcd_data *data) +{ + struct device *dev = &data->hdev->dev; + struct fb_info *info = NULL; + struct picolcd_fb_data *fbdata = NULL; + int i, error = -ENOMEM; + u32 *palette; + + /* The extra memory is: + * - 256*u32 for pseudo_palette + * - struct fb_deferred_io + */ + info = framebuffer_alloc(256 * sizeof(u32) + + sizeof(struct fb_deferred_io) + + sizeof(struct picolcd_fb_data) + + PICOLCDFB_SIZE, dev); + if (info == NULL) { + dev_err(dev, "failed to allocate a framebuffer\n"); + goto err_nomem; + } + + info->fbdefio = info->par; + *info->fbdefio = picolcd_fb_defio; + info->par += sizeof(struct fb_deferred_io); + palette = info->par; + info->par += 256 * sizeof(u32); + for (i = 0; i < 256; i++) + palette[i] = i > 0 && i < 16 ? 0xff : 0; + info->pseudo_palette = palette; + info->fbops = &picolcdfb_ops; + info->var = picolcdfb_var; + info->fix = picolcdfb_fix; + info->fix.smem_len = PICOLCDFB_SIZE*8; + info->flags = FBINFO_FLAG_DEFAULT; + + fbdata = info->par; + spin_lock_init(&fbdata->lock); + fbdata->picolcd = data; + fbdata->update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; + fbdata->bpp = picolcdfb_var.bits_per_pixel; + fbdata->force = 1; + fbdata->vbitmap = info->par + sizeof(struct picolcd_fb_data); + fbdata->bitmap = vmalloc(PICOLCDFB_SIZE*8); + if (fbdata->bitmap == NULL) { + dev_err(dev, "can't get a free page for framebuffer\n"); + goto err_nomem; + } + info->screen_base = (char __force __iomem *)fbdata->bitmap; + info->fix.smem_start = (unsigned long)fbdata->bitmap; + memset(fbdata->vbitmap, 0xff, PICOLCDFB_SIZE); + data->fb_info = info; + + error = picolcd_fb_reset(data, 1); + if (error) { + dev_err(dev, "failed to configure display\n"); + goto err_cleanup; + } + + error = device_create_file(dev, &dev_attr_fb_update_rate); + if (error) { + dev_err(dev, "failed to create sysfs attributes\n"); + goto err_cleanup; + } + + fb_deferred_io_init(info); + error = register_framebuffer(info); + if (error) { + dev_err(dev, "failed to register framebuffer\n"); + goto err_sysfs; + } + return 0; + +err_sysfs: + device_remove_file(dev, &dev_attr_fb_update_rate); + fb_deferred_io_cleanup(info); +err_cleanup: + data->fb_info = NULL; + +err_nomem: + if (fbdata) + vfree(fbdata->bitmap); + framebuffer_release(info); + return error; +} + +void picolcd_exit_framebuffer(struct picolcd_data *data) +{ + struct fb_info *info = data->fb_info; + struct picolcd_fb_data *fbdata = info->par; + unsigned long flags; + + device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); + + /* disconnect framebuffer from HID dev */ + spin_lock_irqsave(&fbdata->lock, flags); + fbdata->picolcd = NULL; + spin_unlock_irqrestore(&fbdata->lock, flags); + + /* make sure there is no running update - thus that fbdata->picolcd + * once obtained under lock is guaranteed not to get free() under + * the feet of the deferred work */ + flush_delayed_work_sync(&info->deferred_work); + + data->fb_info = NULL; + unregister_framebuffer(info); +} diff --git a/drivers/hid/hid-picolcd_lcd.c b/drivers/hid/hid-picolcd_lcd.c new file mode 100644 index 000000000000..2d0ddc5ac65f --- /dev/null +++ b/drivers/hid/hid-picolcd_lcd.c @@ -0,0 +1,107 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/lcd.h> + +#include "hid-picolcd.h" + +/* + * lcd class device + */ +static int picolcd_get_contrast(struct lcd_device *ldev) +{ + struct picolcd_data *data = lcd_get_data(ldev); + return data->lcd_contrast; +} + +static int picolcd_set_contrast(struct lcd_device *ldev, int contrast) +{ + struct picolcd_data *data = lcd_get_data(ldev); + struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_contrast = contrast & 0x0ff; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_contrast); + if (!(data->status & PICOLCD_FAILED)) + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev)); +} + +static struct lcd_ops picolcd_lcdops = { + .get_contrast = picolcd_get_contrast, + .set_contrast = picolcd_set_contrast, + .check_fb = picolcd_check_lcd_fb, +}; + +int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct lcd_device *ldev; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported CONTRAST report"); + return -EINVAL; + } + + ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops); + if (IS_ERR(ldev)) { + dev_err(dev, "failed to register LCD\n"); + return PTR_ERR(ldev); + } + ldev->props.max_contrast = 0x0ff; + data->lcd_contrast = 0xe5; + data->lcd = ldev; + picolcd_set_contrast(ldev, 0xe5); + return 0; +} + +void picolcd_exit_lcd(struct picolcd_data *data) +{ + struct lcd_device *ldev = data->lcd; + + data->lcd = NULL; + if (ldev) + lcd_device_unregister(ldev); +} + +int picolcd_resume_lcd(struct picolcd_data *data) +{ + if (!data->lcd) + return 0; + return picolcd_set_contrast(data->lcd, data->lcd_contrast); +} + diff --git a/drivers/hid/hid-picolcd_leds.c b/drivers/hid/hid-picolcd_leds.c new file mode 100644 index 000000000000..28cb6a4f9634 --- /dev/null +++ b/drivers/hid/hid-picolcd_leds.c @@ -0,0 +1,175 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <linux/leds.h> + +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +void picolcd_leds_set(struct picolcd_data *data) +{ + struct hid_report *report; + unsigned long flags; + + if (!data->led[0]) + return; + report = picolcd_out_report(REPORT_LED_STATE, data->hdev); + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->led_state); + if (!(data->status & PICOLCD_FAILED)) + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); +} + +static void picolcd_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, state = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + if (!data) + return; + for (i = 0; i < 8; i++) { + if (led_cdev != data->led[i]) + continue; + state = (data->led_state >> i) & 1; + if (value == LED_OFF && state) { + data->led_state &= ~(1 << i); + picolcd_leds_set(data); + } else if (value != LED_OFF && !state) { + data->led_state |= 1 << i; + picolcd_leds_set(data); + } + break; + } +} + +static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, value = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + for (i = 0; i < 8; i++) + if (led_cdev == data->led[i]) { + value = (data->led_state >> i) & 1; + break; + } + return value ? LED_FULL : LED_OFF; +} + +int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct led_classdev *led; + size_t name_sz = strlen(dev_name(dev)) + 8; + char *name; + int i, ret = 0; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported LED_STATE report"); + return -EINVAL; + } + + for (i = 0; i < 8; i++) { + led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL); + if (!led) { + dev_err(dev, "can't allocate memory for LED %d\n", i); + ret = -ENOMEM; + goto err; + } + name = (void *)(&led[1]); + snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 1; + led->brightness_get = picolcd_led_get_brightness; + led->brightness_set = picolcd_led_set_brightness; + + data->led[i] = led; + ret = led_classdev_register(dev, data->led[i]); + if (ret) { + data->led[i] = NULL; + kfree(led); + dev_err(dev, "can't register LED %d\n", i); + goto err; + } + } + return 0; +err: + for (i = 0; i < 8; i++) + if (data->led[i]) { + led = data->led[i]; + data->led[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + return ret; +} + +void picolcd_exit_leds(struct picolcd_data *data) +{ + struct led_classdev *led; + int i; + + for (i = 0; i < 8; i++) { + led = data->led[i]; + data->led[i] = NULL; + if (!led) + continue; + led_classdev_unregister(led); + kfree(led); + } +} + + diff --git a/drivers/hid/hid-ps3remote.c b/drivers/hid/hid-ps3remote.c new file mode 100644 index 000000000000..03811e539d71 --- /dev/null +++ b/drivers/hid/hid-ps3remote.c @@ -0,0 +1,215 @@ +/* + * HID driver for Sony PS3 BD Remote Control + * + * Copyright (c) 2012 David Dillow <dave@thedillows.org> + * Based on a blend of the bluez fakehid user-space code by Marcel Holtmann + * and other kernel HID drivers. + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* NOTE: in order for the Sony PS3 BD Remote Control to be found by + * a Bluetooth host, the key combination Start+Enter has to be kept pressed + * for about 7 seconds with the Bluetooth Host Controller in discovering mode. + * + * There will be no PIN request from the device. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +static __u8 ps3remote_rdesc[] = { + 0x05, 0x01, /* GUsagePage Generic Desktop */ + 0x09, 0x05, /* LUsage 0x05 [Game Pad] */ + 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */ + + /* Use collection 1 for joypad buttons */ + 0xA1, 0x02, /* MCollection Logical (interrelated data) */ + + /* Ignore the 1st byte, maybe it is used for a controller + * number but it's not needed for correct operation */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x01, /* GReportCount 0x01 [1] */ + 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ + + /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these + * buttons multiple keypresses are allowed */ + 0x05, 0x09, /* GUsagePage Button */ + 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */ + 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */ + 0x14, /* GLogicalMinimum [0] */ + 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */ + 0x75, 0x01, /* GReportSize 0x01 [1] */ + 0x95, 0x18, /* GReportCount 0x18 [24] */ + 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ + + 0xC0, /* MEndCollection */ + + /* Use collection 2 for remote control buttons */ + 0xA1, 0x02, /* MCollection Logical (interrelated data) */ + + /* 5th byte is used for remote control buttons */ + 0x05, 0x09, /* GUsagePage Button */ + 0x18, /* LUsageMinimum [No button pressed] */ + 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */ + 0x14, /* GLogicalMinimum [0] */ + 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x01, /* GReportCount 0x01 [1] */ + 0x80, /* MInput */ + + /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at + * 0xff and 11th is for press indication */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x06, /* GReportCount 0x06 [6] */ + 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ + + /* 12th byte is for battery strength */ + 0x05, 0x06, /* GUsagePage Generic Device Controls */ + 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */ + 0x14, /* GLogicalMinimum [0] */ + 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */ + 0x75, 0x08, /* GReportSize 0x08 [8] */ + 0x95, 0x01, /* GReportCount 0x01 [1] */ + 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ + + 0xC0, /* MEndCollection */ + + 0xC0 /* MEndCollection [Game Pad] */ +}; + +static const unsigned int ps3remote_keymap_joypad_buttons[] = { + [0x01] = KEY_SELECT, + [0x02] = BTN_THUMBL, /* L3 */ + [0x03] = BTN_THUMBR, /* R3 */ + [0x04] = BTN_START, + [0x05] = KEY_UP, + [0x06] = KEY_RIGHT, + [0x07] = KEY_DOWN, + [0x08] = KEY_LEFT, + [0x09] = BTN_TL2, /* L2 */ + [0x0a] = BTN_TR2, /* R2 */ + [0x0b] = BTN_TL, /* L1 */ + [0x0c] = BTN_TR, /* R1 */ + [0x0d] = KEY_OPTION, /* options/triangle */ + [0x0e] = KEY_BACK, /* back/circle */ + [0x0f] = BTN_0, /* cross */ + [0x10] = KEY_SCREEN, /* view/square */ + [0x11] = KEY_HOMEPAGE, /* PS button */ + [0x14] = KEY_ENTER, +}; +static const unsigned int ps3remote_keymap_remote_buttons[] = { + [0x00] = KEY_1, + [0x01] = KEY_2, + [0x02] = KEY_3, + [0x03] = KEY_4, + [0x04] = KEY_5, + [0x05] = KEY_6, + [0x06] = KEY_7, + [0x07] = KEY_8, + [0x08] = KEY_9, + [0x09] = KEY_0, + [0x0e] = KEY_ESC, /* return */ + [0x0f] = KEY_CLEAR, + [0x16] = KEY_EJECTCD, + [0x1a] = KEY_MENU, /* top menu */ + [0x28] = KEY_TIME, + [0x30] = KEY_PREVIOUS, + [0x31] = KEY_NEXT, + [0x32] = KEY_PLAY, + [0x33] = KEY_REWIND, /* scan back */ + [0x34] = KEY_FORWARD, /* scan forward */ + [0x38] = KEY_STOP, + [0x39] = KEY_PAUSE, + [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */ + [0x60] = KEY_FRAMEBACK, /* slow/step back */ + [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */ + [0x63] = KEY_SUBTITLE, + [0x64] = KEY_AUDIO, + [0x65] = KEY_ANGLE, + [0x70] = KEY_INFO, /* display */ + [0x80] = KEY_BLUE, + [0x81] = KEY_RED, + [0x82] = KEY_GREEN, + [0x83] = KEY_YELLOW, +}; + +static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + *rsize = sizeof(ps3remote_rdesc); + return ps3remote_rdesc; +} + +static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + unsigned int key = usage->hid & HID_USAGE; + + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON) + return -1; + + switch (usage->collection_index) { + case 1: + if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons)) + return -1; + + key = ps3remote_keymap_joypad_buttons[key]; + if (!key) + return -1; + break; + case 2: + if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons)) + return -1; + + key = ps3remote_keymap_remote_buttons[key]; + if (!key) + return -1; + break; + default: + return -1; + } + + hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key); + return 1; +} + +static const struct hid_device_id ps3remote_devices[] = { + /* PS3 BD Remote Control */ + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) }, + /* Logitech Harmony Adapter for PS3 */ + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) }, + { } +}; +MODULE_DEVICE_TABLE(hid, ps3remote_devices); + +static struct hid_driver ps3remote_driver = { + .name = "ps3_remote", + .id_table = ps3remote_devices, + .report_fixup = ps3remote_fixup, + .input_mapping = ps3remote_mapping, +}; + +static int __init ps3remote_init(void) +{ + return hid_register_driver(&ps3remote_driver); +} + +static void __exit ps3remote_exit(void) +{ + hid_unregister_driver(&ps3remote_driver); +} + +module_init(ps3remote_init); +module_exit(ps3remote_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Dillow <dave@thedillows.org>, Antonio Ospite <ospite@studenti.unina.it>"); diff --git a/drivers/hid/hid-uclogic.c b/drivers/hid/hid-uclogic.c index 3aba02be1f26..2e56a1fd2375 100644 --- a/drivers/hid/hid-uclogic.c +++ b/drivers/hid/hid-uclogic.c @@ -466,6 +466,86 @@ static __u8 twhl850_rdesc_fixed2[] = { 0xC0 /* End Collection */ }; +/* + * See TWHA60 description, device and HID report descriptors at + * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_TWHA60 + */ + +/* Size of the original descriptors of TWHA60 tablet */ +#define TWHA60_RDESC_ORIG_SIZE0 254 +#define TWHA60_RDESC_ORIG_SIZE1 139 + +/* Fixed TWHA60 report descriptor, interface 0 (stylus) */ +static __u8 twha60_rdesc_fixed0[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x09, /* Report ID (9), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x04, /* Report Count (4), */ + 0x81, 0x01, /* Input (Constant), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x10, 0x27, /* Physical Maximum (10000), */ + 0x27, 0x3F, 0x9C, + 0x00, 0x00, /* Logical Maximum (39999), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x6A, 0x18, /* Physical Maximum (6250), */ + 0x26, 0xA7, 0x61, /* Logical Maximum (24999), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* Fixed TWHA60 report descriptor, interface 1 (frame buttons) */ +static __u8 twha60_rdesc_fixed1[] = { + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x06, /* Usage (Keyboard), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x05, /* Report ID (5), */ + 0x05, 0x07, /* Usage Page (Keyboard), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x08, /* Report Count (8), */ + 0x81, 0x01, /* Input (Constant), */ + 0x95, 0x0C, /* Report Count (12), */ + 0x19, 0x3A, /* Usage Minimum (KB F1), */ + 0x29, 0x45, /* Usage Maximum (KB F12), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x0C, /* Report Count (12), */ + 0x19, 0x68, /* Usage Minimum (KB F13), */ + 0x29, 0x73, /* Usage Maximum (KB F24), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x08, /* Report Count (8), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0 /* End Collection */ +}; + static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { @@ -525,6 +605,22 @@ static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, break; } break; + case USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60: + switch (iface_num) { + case 0: + if (*rsize == TWHA60_RDESC_ORIG_SIZE0) { + rdesc = twha60_rdesc_fixed0; + *rsize = sizeof(twha60_rdesc_fixed0); + } + break; + case 1: + if (*rsize == TWHA60_RDESC_ORIG_SIZE1) { + rdesc = twha60_rdesc_fixed1; + *rsize = sizeof(twha60_rdesc_fixed1); + } + break; + } + break; } return rdesc; @@ -543,6 +639,8 @@ static const struct hid_device_id uclogic_devices[] = { USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, + USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) }, { } }; MODULE_DEVICE_TABLE(hid, uclogic_devices); diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index fe23a1eb586b..75b970f116ee 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -33,6 +33,8 @@ #define PAD_DEVICE_ID 0x0F #define WAC_CMD_LED_CONTROL 0x20 +#define WAC_CMD_ICON_START_STOP 0x21 +#define WAC_CMD_ICON_TRANSFER 0x26 struct wacom_data { __u16 tool; @@ -69,6 +71,91 @@ static enum power_supply_property wacom_ac_props[] = { POWER_SUPPLY_PROP_SCOPE, }; +static void wacom_scramble(__u8 *image) +{ + __u16 mask; + __u16 s1; + __u16 s2; + __u16 r1 ; + __u16 r2 ; + __u16 r; + __u8 buf[256]; + int i, w, x, y, z; + + for (x = 0; x < 32; x++) { + for (y = 0; y < 8; y++) + buf[(8 * x) + (7 - y)] = image[(8 * x) + y]; + } + + /* Change 76543210 into GECA6420 as required by Intuos4 WL + * HGFEDCBA HFDB7531 + */ + for (x = 0; x < 4; x++) { + for (y = 0; y < 4; y++) { + for (z = 0; z < 8; z++) { + mask = 0x0001; + r1 = 0; + r2 = 0; + i = (x << 6) + (y << 4) + z; + s1 = buf[i]; + s2 = buf[i+8]; + for (w = 0; w < 8; w++) { + r1 |= (s1 & mask); + r2 |= (s2 & mask); + s1 <<= 1; + s2 <<= 1; + mask <<= 2; + } + r = r1 | (r2 << 1); + i = (x << 6) + (y << 4) + (z << 1); + image[i] = 0xFF & r; + image[i+1] = (0xFF00 & r) >> 8; + } + } + } +} + +static void wacom_set_image(struct hid_device *hdev, const char *image, + __u8 icon_no) +{ + __u8 rep_data[68]; + __u8 p[256]; + int ret, i, j; + + for (i = 0; i < 256; i++) + p[i] = image[i]; + + rep_data[0] = WAC_CMD_ICON_START_STOP; + rep_data[1] = 0; + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + if (ret < 0) + goto err; + + rep_data[0] = WAC_CMD_ICON_TRANSFER; + rep_data[1] = icon_no & 0x07; + + wacom_scramble(p); + + for (i = 0; i < 4; i++) { + for (j = 0; j < 64; j++) + rep_data[j + 3] = p[(i << 6) + j]; + + rep_data[2] = i; + ret = hdev->hid_output_raw_report(hdev, rep_data, 67, + HID_FEATURE_REPORT); + } + + rep_data[0] = WAC_CMD_ICON_START_STOP; + rep_data[1] = 0; + + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + +err: + return; +} + static void wacom_leds_set_brightness(struct led_classdev *led_dev, enum led_brightness value) { @@ -91,7 +178,10 @@ static void wacom_leds_set_brightness(struct led_classdev *led_dev, if (buf) { buf[0] = WAC_CMD_LED_CONTROL; buf[1] = led; - buf[2] = value; + buf[2] = value >> 2; + buf[3] = value; + /* use fixed brightness for OLEDs */ + buf[4] = 0x08; hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT); kfree(buf); } @@ -317,6 +407,34 @@ static ssize_t wacom_store_speed(struct device *dev, static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP, wacom_show_speed, wacom_store_speed); +#define WACOM_STORE(OLED_ID) \ +static ssize_t wacom_oled##OLED_ID##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct hid_device *hdev = container_of(dev, struct hid_device, \ + dev); \ + \ + if (count != 256) \ + return -EINVAL; \ + \ + wacom_set_image(hdev, buf, OLED_ID); \ + \ + return count; \ +} \ + \ +static DEVICE_ATTR(oled##OLED_ID##_img, S_IWUSR | S_IWGRP, NULL, \ + wacom_oled##OLED_ID##_store) + +WACOM_STORE(0); +WACOM_STORE(1); +WACOM_STORE(2); +WACOM_STORE(3); +WACOM_STORE(4); +WACOM_STORE(5); +WACOM_STORE(6); +WACOM_STORE(7); + static int wacom_gr_parse_report(struct hid_device *hdev, struct wacom_data *wdata, struct input_dev *input, unsigned char *data) @@ -717,17 +835,33 @@ static int wacom_probe(struct hid_device *hdev, hid_warn(hdev, "can't create sysfs speed attribute err: %d\n", ret); +#define OLED_INIT(OLED_ID) \ + do { \ + ret = device_create_file(&hdev->dev, \ + &dev_attr_oled##OLED_ID##_img); \ + if (ret) \ + hid_warn(hdev, \ + "can't create sysfs oled attribute, err: %d\n", ret);\ + } while (0) + +OLED_INIT(0); +OLED_INIT(1); +OLED_INIT(2); +OLED_INIT(3); +OLED_INIT(4); +OLED_INIT(5); +OLED_INIT(6); +OLED_INIT(7); + wdata->features = 0; wacom_set_features(hdev, 1); if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) { sprintf(hdev->name, "%s", "Wacom Intuos4 WL"); ret = wacom_initialize_leds(hdev); - if (ret) { + if (ret) hid_warn(hdev, "can't create led attribute, err: %d\n", ret); - goto destroy_leds; - } } wdata->battery.properties = wacom_battery_props; @@ -740,8 +874,8 @@ static int wacom_probe(struct hid_device *hdev, ret = power_supply_register(&hdev->dev, &wdata->battery); if (ret) { - hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n", - ret); + hid_err(hdev, "can't create sysfs battery attribute, err: %d\n", + ret); goto err_battery; } @@ -756,8 +890,8 @@ static int wacom_probe(struct hid_device *hdev, ret = power_supply_register(&hdev->dev, &wdata->ac); if (ret) { - hid_warn(hdev, - "can't create ac battery attribute, err: %d\n", ret); + hid_err(hdev, + "can't create ac battery attribute, err: %d\n", ret); goto err_ac; } @@ -767,10 +901,17 @@ static int wacom_probe(struct hid_device *hdev, err_ac: power_supply_unregister(&wdata->battery); err_battery: + wacom_destroy_leds(hdev); + device_remove_file(&hdev->dev, &dev_attr_oled0_img); + device_remove_file(&hdev->dev, &dev_attr_oled1_img); + device_remove_file(&hdev->dev, &dev_attr_oled2_img); + device_remove_file(&hdev->dev, &dev_attr_oled3_img); + device_remove_file(&hdev->dev, &dev_attr_oled4_img); + device_remove_file(&hdev->dev, &dev_attr_oled5_img); + device_remove_file(&hdev->dev, &dev_attr_oled6_img); + device_remove_file(&hdev->dev, &dev_attr_oled7_img); device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); -destroy_leds: - wacom_destroy_leds(hdev); err_free: kfree(wdata); return ret; @@ -781,6 +922,14 @@ static void wacom_remove(struct hid_device *hdev) struct wacom_data *wdata = hid_get_drvdata(hdev); wacom_destroy_leds(hdev); + device_remove_file(&hdev->dev, &dev_attr_oled0_img); + device_remove_file(&hdev->dev, &dev_attr_oled1_img); + device_remove_file(&hdev->dev, &dev_attr_oled2_img); + device_remove_file(&hdev->dev, &dev_attr_oled3_img); + device_remove_file(&hdev->dev, &dev_attr_oled4_img); + device_remove_file(&hdev->dev, &dev_attr_oled5_img); + device_remove_file(&hdev->dev, &dev_attr_oled6_img); + device_remove_file(&hdev->dev, &dev_attr_oled7_img); device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 3b6f7bf5a77e..c46c5f1037f4 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -42,6 +42,7 @@ static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; static DEFINE_MUTEX(minors_lock); +static void drop_ref(struct hidraw *hid, int exists_bit); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -113,7 +114,7 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, __u8 *buf; int ret = 0; - if (!hidraw_table[minor]) { + if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { ret = -ENODEV; goto out; } @@ -261,7 +262,7 @@ static int hidraw_open(struct inode *inode, struct file *file) } mutex_lock(&minors_lock); - if (!hidraw_table[minor]) { + if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { err = -ENODEV; goto out_unlock; } @@ -298,36 +299,12 @@ out: static int hidraw_release(struct inode * inode, struct file * file) { unsigned int minor = iminor(inode); - struct hidraw *dev; struct hidraw_list *list = file->private_data; - int ret; - int i; - - mutex_lock(&minors_lock); - if (!hidraw_table[minor]) { - ret = -ENODEV; - goto unlock; - } + drop_ref(hidraw_table[minor], 0); list_del(&list->node); - dev = hidraw_table[minor]; - if (!--dev->open) { - if (list->hidraw->exist) { - hid_hw_power(dev->hid, PM_HINT_NORMAL); - hid_hw_close(dev->hid); - } else { - kfree(list->hidraw); - } - } - - for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i) - kfree(list->buffer[i].value); kfree(list); - ret = 0; -unlock: - mutex_unlock(&minors_lock); - - return ret; + return 0; } static long hidraw_ioctl(struct file *file, unsigned int cmd, @@ -529,21 +506,7 @@ EXPORT_SYMBOL_GPL(hidraw_connect); void hidraw_disconnect(struct hid_device *hid) { struct hidraw *hidraw = hid->hidraw; - - mutex_lock(&minors_lock); - hidraw->exist = 0; - - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - - hidraw_table[hidraw->minor] = NULL; - - if (hidraw->open) { - hid_hw_close(hid); - wake_up_interruptible(&hidraw->wait); - } else { - kfree(hidraw); - } - mutex_unlock(&minors_lock); + drop_ref(hidraw, 1); } EXPORT_SYMBOL_GPL(hidraw_disconnect); @@ -585,3 +548,23 @@ void hidraw_exit(void) unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES); } + +static void drop_ref(struct hidraw *hidraw, int exists_bit) +{ + mutex_lock(&minors_lock); + if (exists_bit) { + hid_hw_close(hidraw->hid); + hidraw->exist = 0; + if (hidraw->open) + wake_up_interruptible(&hidraw->wait); + } else { + --hidraw->open; + } + + if (!hidraw->open && !hidraw->exist) { + device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); + hidraw_table[hidraw->minor] = NULL; + kfree(hidraw); + } + mutex_unlock(&minors_lock); +} |