diff options
Diffstat (limited to 'drivers/hwmon/applesmc.c')
| -rw-r--r-- | drivers/hwmon/applesmc.c | 130 |
1 files changed, 82 insertions, 48 deletions
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index a18887990f4a..79b498f816fe 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -32,6 +32,7 @@ #include <linux/hwmon.h> #include <linux/workqueue.h> #include <linux/err.h> +#include <linux/bits.h> /* data port used by Apple SMC */ #define APPLESMC_DATA_PORT 0x300 @@ -42,10 +43,13 @@ #define APPLESMC_MAX_DATA_LENGTH 32 -/* wait up to 128 ms for a status change. */ -#define APPLESMC_MIN_WAIT 0x0010 -#define APPLESMC_RETRY_WAIT 0x0100 -#define APPLESMC_MAX_WAIT 0x20000 +/* Apple SMC status bits */ +#define SMC_STATUS_AWAITING_DATA BIT(0) /* SMC has data waiting to be read */ +#define SMC_STATUS_IB_CLOSED BIT(1) /* Will ignore any input */ +#define SMC_STATUS_BUSY BIT(2) /* Command in progress */ + +/* Initial wait is 8us */ +#define APPLESMC_MIN_WAIT 0x0008 #define APPLESMC_READ_CMD 0x10 #define APPLESMC_WRITE_CMD 0x11 @@ -151,65 +155,84 @@ static unsigned int key_at_index; static struct workqueue_struct *applesmc_led_wq; /* - * wait_read - Wait for a byte to appear on SMC port. Callers must - * hold applesmc_lock. + * Wait for specific status bits with a mask on the SMC. + * Used before all transactions. + * This does 10 fast loops of 8us then exponentially backs off for a + * minimum total wait of 262ms. Depending on usleep_range this could + * run out past 500ms. */ -static int wait_read(void) + +static int wait_status(u8 val, u8 mask) { - unsigned long end = jiffies + (APPLESMC_MAX_WAIT * HZ) / USEC_PER_SEC; u8 status; int us; + int i; - for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) { - usleep_range(us, us * 16); + us = APPLESMC_MIN_WAIT; + for (i = 0; i < 24 ; i++) { status = inb(APPLESMC_CMD_PORT); - /* read: wait for smc to settle */ - if (status & 0x01) + if ((status & mask) == val) return 0; - /* timeout: give up */ - if (time_after(jiffies, end)) - break; + usleep_range(us, us * 2); + if (i > 9) + us <<= 1; } - - pr_warn("wait_read() fail: 0x%02x\n", status); return -EIO; } -/* - * send_byte - Write to SMC port, retrying when necessary. Callers - * must hold applesmc_lock. - */ +/* send_byte - Write to SMC data port. Callers must hold applesmc_lock. */ + static int send_byte(u8 cmd, u16 port) { - u8 status; - int us; - unsigned long end = jiffies + (APPLESMC_MAX_WAIT * HZ) / USEC_PER_SEC; + int status; + + status = wait_status(0, SMC_STATUS_IB_CLOSED); + if (status) + return status; + /* + * This needs to be a separate read looking for bit 0x04 + * after bit 0x02 falls. If consolidated with the wait above + * this extra read may not happen if status returns both + * simultaneously and this would appear to be required. + */ + status = wait_status(SMC_STATUS_BUSY, SMC_STATUS_BUSY); + if (status) + return status; outb(cmd, port); - for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) { - usleep_range(us, us * 16); - status = inb(APPLESMC_CMD_PORT); - /* write: wait for smc to settle */ - if (status & 0x02) - continue; - /* ready: cmd accepted, return */ - if (status & 0x04) - return 0; - /* timeout: give up */ - if (time_after(jiffies, end)) - break; - /* busy: long wait and resend */ - udelay(APPLESMC_RETRY_WAIT); - outb(cmd, port); - } - - pr_warn("send_byte(0x%02x, 0x%04x) fail: 0x%02x\n", cmd, port, status); - return -EIO; + return 0; } +/* send_command - Write a command to the SMC. Callers must hold applesmc_lock. */ + static int send_command(u8 cmd) { - return send_byte(cmd, APPLESMC_CMD_PORT); + int ret; + + ret = wait_status(0, SMC_STATUS_IB_CLOSED); + if (ret) + return ret; + outb(cmd, APPLESMC_CMD_PORT); + return 0; +} + +/* + * Based on logic from the Apple driver. This is issued before any interaction + * If busy is stuck high, issue a read command to reset the SMC state machine. + * If busy is stuck high after the command then the SMC is jammed. + */ + +static int smc_sane(void) +{ + int ret; + + ret = wait_status(0, SMC_STATUS_BUSY); + if (!ret) + return ret; + ret = send_command(APPLESMC_READ_CMD); + if (ret) + return ret; + return wait_status(0, SMC_STATUS_BUSY); } static int send_argument(const char *key) @@ -226,6 +249,11 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) { u8 status, data = 0; int i; + int ret; + + ret = smc_sane(); + if (ret) + return ret; if (send_command(cmd) || send_argument(key)) { pr_warn("%.4s: read arg fail\n", key); @@ -239,7 +267,8 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) } for (i = 0; i < len; i++) { - if (wait_read()) { + if (wait_status(SMC_STATUS_AWAITING_DATA | SMC_STATUS_BUSY, + SMC_STATUS_AWAITING_DATA | SMC_STATUS_BUSY)) { pr_warn("%.4s: read data[%d] fail\n", key, i); return -EIO; } @@ -250,19 +279,24 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) for (i = 0; i < 16; i++) { udelay(APPLESMC_MIN_WAIT); status = inb(APPLESMC_CMD_PORT); - if (!(status & 0x01)) + if (!(status & SMC_STATUS_AWAITING_DATA)) break; data = inb(APPLESMC_DATA_PORT); } if (i) pr_warn("flushed %d bytes, last value is: %d\n", i, data); - return 0; + return wait_status(0, SMC_STATUS_BUSY); } static int write_smc(u8 cmd, const char *key, const u8 *buffer, u8 len) { int i; + int ret; + + ret = smc_sane(); + if (ret) + return ret; if (send_command(cmd) || send_argument(key)) { pr_warn("%s: write arg fail\n", key); @@ -281,7 +315,7 @@ static int write_smc(u8 cmd, const char *key, const u8 *buffer, u8 len) } } - return 0; + return wait_status(0, SMC_STATUS_BUSY); } static int read_register_count(unsigned int *count) |