summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/it87.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/it87.c')
-rw-r--r--drivers/hwmon/it87.c115
1 files changed, 82 insertions, 33 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e12c132ff83a..d793cc011990 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -46,6 +46,8 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
#include <asm/io.h>
#define DRVNAME "it87"
@@ -151,9 +153,9 @@ static int fix_pwm_polarity;
/* The IT8718F has the VID value in a different register, in Super-I/O
configuration space. */
#define IT87_REG_VID 0x0a
-/* Warning: register 0x0b is used for something completely different in
- new chips/revisions. I suspect only 16-bit tachometer mode will work
- for these. */
+/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+ for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+ mode. */
#define IT87_REG_FAN_DIV 0x0b
#define IT87_REG_FAN_16BIT 0x0c
@@ -234,7 +236,10 @@ static const unsigned int pwm_freq[8] = {
struct it87_sio_data {
enum chips type;
/* Values read from Super-I/O config space */
+ u8 revision;
u8 vid_value;
+ /* Values set based on DMI strings */
+ u8 skip_pwm;
};
/* For each registered chip, we need to keep some data in memory.
@@ -242,6 +247,7 @@ struct it87_sio_data {
struct it87_data {
struct device *hwmon_dev;
enum chips type;
+ u8 revision;
unsigned short addr;
const char *name;
@@ -268,6 +274,16 @@ struct it87_data {
u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
};
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+ /* IT8705F Datasheet 0.4.1, 3h == Version G.
+ IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+ These are the first revisions with 16bit tachometer support. */
+ return (data->type == it87 && data->revision >= 0x03)
+ || (data->type == it8712 && data->revision >= 0x08)
+ || data->type == it8716
+ || data->type == it8718;
+}
static int it87_probe(struct platform_device *pdev);
static int __devexit it87_remove(struct platform_device *pdev);
@@ -952,6 +968,7 @@ static int __init it87_find(unsigned short *address,
{
int err = -ENODEV;
u16 chip_type;
+ const char *board_vendor, *board_name;
superio_enter();
chip_type = force_id ? force_id : superio_inw(DEVID);
@@ -991,8 +1008,9 @@ static int __init it87_find(unsigned short *address,
}
err = 0;
+ sio_data->revision = superio_inb(DEVREV) & 0x0f;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
- chip_type, *address, superio_inb(DEVREV) & 0x0f);
+ chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (chip_type != IT8705F_DEVID) {
@@ -1009,6 +1027,24 @@ static int __init it87_find(unsigned short *address,
pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
}
+ /* Disable specific features based on DMI strings */
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_vendor && board_name) {
+ if (strcmp(board_vendor, "nVIDIA") == 0
+ && strcmp(board_name, "FN68PT") == 0) {
+ /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+ connected to a fan, but to something else. One user
+ has reported instant system power-off when changing
+ the PWM2 duty cycle, so we disable it.
+ I use the board name string as the trigger in case
+ the same board is ever used in other systems. */
+ pr_info("it87: Disabling pwm2 due to "
+ "hardware constraints\n");
+ sio_data->skip_pwm = (1 << 1);
+ }
+ }
+
exit:
superio_exit();
return err;
@@ -1045,6 +1081,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
data->addr = res->start;
data->type = sio_data->type;
+ data->revision = sio_data->revision;
data->name = names[sio_data->type];
/* Now, we do the remaining detection. */
@@ -1069,7 +1106,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
goto ERROR2;
/* Do not create fan files for disabled fans */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
/* 16-bit tachometers */
if (data->has_fan & (1 << 0)) {
if ((err = device_create_file(dev,
@@ -1154,25 +1191,33 @@ static int __devinit it87_probe(struct platform_device *pdev)
}
if (enable_pwm_interface) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_pwm1_enable.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm2_enable.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm3_enable.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm1.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm2.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm3.dev_attr))
- || (err = device_create_file(dev,
- &dev_attr_pwm1_freq))
- || (err = device_create_file(dev,
- &dev_attr_pwm2_freq))
- || (err = device_create_file(dev,
- &dev_attr_pwm3_freq)))
- goto ERROR4;
+ if (!(sio_data->skip_pwm & (1 << 0))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm1.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm1_freq)))
+ goto ERROR4;
+ }
+ if (!(sio_data->skip_pwm & (1 << 1))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm2_freq)))
+ goto ERROR4;
+ }
+ if (!(sio_data->skip_pwm & (1 << 2))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm3.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm3_freq)))
+ goto ERROR4;
+ }
}
if (data->type == it8712 || data->type == it8716
@@ -1350,7 +1395,7 @@ static void __devinit it87_init_device(struct platform_device *pdev)
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
/* Set tachometers to 16-bit mode if needed */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
dev_dbg(&pdev->dev,
@@ -1358,10 +1403,13 @@ static void __devinit it87_init_device(struct platform_device *pdev)
it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
- if (tmp & (1 << 4))
- data->has_fan |= (1 << 3); /* fan4 enabled */
- if (tmp & (1 << 5))
- data->has_fan |= (1 << 4); /* fan5 enabled */
+ /* IT8705F only supports three fans. */
+ if (data->type != it87) {
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
+ }
}
/* Set current fan mode registers and the default settings for the
@@ -1426,7 +1474,7 @@ static struct it87_data *it87_update_device(struct device *dev)
data->fan[i] = it87_read_value(data,
IT87_REG_FAN[i]);
/* Add high byte if in 16-bit mode */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
data->fan[i] |= it87_read_value(data,
IT87_REG_FANX[i]) << 8;
data->fan_min[i] |= it87_read_value(data,
@@ -1443,8 +1491,7 @@ static struct it87_data *it87_update_device(struct device *dev)
}
/* Newer chips don't have clock dividers */
- if ((data->has_fan & 0x07) && data->type != it8716
- && data->type != it8718) {
+ if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
i = it87_read_value(data, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
@@ -1460,7 +1507,8 @@ static struct it87_data *it87_update_device(struct device *dev)
data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
- /* The 8705 does not have VID capability */
+ /* The 8705 does not have VID capability.
+ The 8718 does not use IT87_REG_VID for the same purpose. */
if (data->type == it8712 || data->type == it8716) {
data->vid = it87_read_value(data, IT87_REG_VID);
/* The older IT8712F revisions had only 5 VID pins,
@@ -1529,6 +1577,7 @@ static int __init sm_it87_init(void)
unsigned short isa_address=0;
struct it87_sio_data sio_data;
+ memset(&sio_data, 0, sizeof(struct it87_sio_data));
err = it87_find(&isa_address, &sio_data);
if (err)
return err;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 01:26:01 +0100