diff options
Diffstat (limited to 'drivers/hwmon/nct6775.h')
| -rw-r--r-- | drivers/hwmon/nct6775.h | 30 |
1 files changed, 23 insertions, 7 deletions
diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h index a84c6ce7275d..296eff99d003 100644 --- a/drivers/hwmon/nct6775.h +++ b/drivers/hwmon/nct6775.h @@ -8,7 +8,7 @@ enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793, nct6795, nct6796, nct6797, nct6798, nct6799 }; enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; -#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/ +#define NUM_TEMP 12 /* Max number of temp attribute sets w/ limits*/ #define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ #define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */ @@ -16,6 +16,7 @@ enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; #define NUM_REG_BEEP 5 /* Max number of beep registers */ #define NUM_FAN 7 +#define NUM_IN 18 struct nct6775_data { int addr; /* IO base of hw monitor block */ @@ -97,7 +98,7 @@ struct nct6775_data { /* Register values */ u8 bank; /* current register bank */ u8 in_num; /* number of in inputs we have */ - u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ + u8 in[NUM_IN][3]; /* [0]=in, [1]=in_max, [2]=in_min */ const u16 *scale_in; /* internal scaling factors */ unsigned int rpm[NUM_FAN]; u16 fan_min[NUM_FAN]; @@ -166,7 +167,7 @@ struct nct6775_data { u16 have_temp; u16 have_temp_fixed; u16 have_tsi_temp; - u16 have_in; + u32 have_in; /* Remember extra register values over suspend/resume */ u8 vbat; @@ -239,10 +240,25 @@ nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group * #define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 -#define FAN_ALARM_BASE 16 -#define TEMP_ALARM_BASE 24 -#define INTRUSION_ALARM_BASE 30 -#define BEEP_ENABLE_BASE 15 +/* + * ALARM_BITS and BEEP_BITS store bit-index for the mask of the registers + * loaded into data->alarm and data->beep. + * + * Every input register (IN/TEMP/FAN) must have a corresponding + * ALARM/BEEP bit at the same index BITS[BASE + index] + * Set value to -1 to disable the visibility of that '*_alarm' attribute and + * to pad the bits until the next BASE + * + * Beep has an additional GLOBAL_BEEP_ENABLE bit + */ +#define VIN_ALARM_BASE 0 +#define FAN_ALARM_BASE 24 +#define TEMP_ALARM_BASE 36 +#define INTRUSION_ALARM_BASE 48 +#define BEEP_ENABLE_BASE 50 + +#define NUM_ALARM_BITS (INTRUSION_ALARM_BASE + 4) +#define NUM_BEEP_BITS (BEEP_ENABLE_BASE + 1) /* * Not currently used: |