diff options
Diffstat (limited to 'drivers/hwmon/pmbus/fsp-3y.c')
| -rw-r--r-- | drivers/hwmon/pmbus/fsp-3y.c | 32 |
1 files changed, 25 insertions, 7 deletions
diff --git a/drivers/hwmon/pmbus/fsp-3y.c b/drivers/hwmon/pmbus/fsp-3y.c index e24842475254..aec294cc72d1 100644 --- a/drivers/hwmon/pmbus/fsp-3y.c +++ b/drivers/hwmon/pmbus/fsp-3y.c @@ -37,6 +37,8 @@ struct fsp3y_data { struct pmbus_driver_info info; int chip; int page; + + bool vout_linear_11; }; #define to_fsp3y_data(x) container_of(x, struct fsp3y_data, info) @@ -108,11 +110,9 @@ static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg) int rv; /* - * YH5151-E outputs vout in linear11. The conversion is done when - * reading. Here, we have to inject pmbus_core with the correct - * exponent (it is -6). + * Inject an exponent for non-compliant YH5151-E. */ - if (data->chip == yh5151e && reg == PMBUS_VOUT_MODE) + if (data->vout_linear_11 && reg == PMBUS_VOUT_MODE) return 0x1A; rv = set_page(client, page); @@ -161,10 +161,9 @@ static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase, return rv; /* - * YH-5151E is non-compliant and outputs output voltages in linear11 - * instead of linear16. + * Handle YH-5151E non-compliant linear11 vout voltage. */ - if (data->chip == yh5151e && reg == PMBUS_READ_VOUT) + if (data->vout_linear_11 && reg == PMBUS_READ_VOUT) rv = sign_extend32(rv, 10) & 0xffff; return rv; @@ -256,6 +255,25 @@ static int fsp3y_probe(struct i2c_client *client) data->info = fsp3y_info[data->chip]; + /* + * YH-5151E sometimes reports vout in linear11 and sometimes in + * linear16. This depends on the exact individual piece of hardware. One + * YH-5151E can use linear16 and another might use linear11 instead. + * + * The format can be recognized by reading VOUT_MODE - if it doesn't + * report a valid exponent, then vout uses linear11. Otherwise, the + * device is compliant and uses linear16. + */ + data->vout_linear_11 = false; + if (data->chip == yh5151e) { + rv = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE); + if (rv < 0) + return rv; + + if (rv == 0xFF) + data->vout_linear_11 = true; + } + return pmbus_do_probe(client, &data->info); } |