diff options
Diffstat (limited to 'drivers/hwmon/pmbus/mp2975.c')
| -rw-r--r-- | drivers/hwmon/pmbus/mp2975.c | 429 |
1 files changed, 331 insertions, 98 deletions
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index 2109b0458a8b..26ba50633100 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_device.h> #include "pmbus.h" /* Vendor specific registers. */ @@ -34,6 +35,8 @@ #define MP2975_MFR_OVP_TH_SET 0xe5 #define MP2975_MFR_UVP_SET 0xe6 +#define MP2973_MFR_RESO_SET 0xc7 + #define MP2975_VOUT_FORMAT BIT(15) #define MP2975_VID_STEP_SEL_R1 BIT(4) #define MP2975_IMVP9_EN_R1 BIT(13) @@ -48,43 +51,80 @@ #define MP2975_SENSE_AMPL_HALF 2 #define MP2975_VIN_UV_LIMIT_UNIT 8 +#define MP2973_VOUT_FORMAT_R1 GENMASK(7, 6) +#define MP2973_VOUT_FORMAT_R2 GENMASK(4, 3) +#define MP2973_VOUT_FORMAT_DIRECT_R1 BIT(7) +#define MP2973_VOUT_FORMAT_LINEAR_R1 BIT(6) +#define MP2973_VOUT_FORMAT_DIRECT_R2 BIT(4) +#define MP2973_VOUT_FORMAT_LINEAR_R2 BIT(3) + +#define MP2973_MFR_VR_MULTI_CONFIG_R1 0x0d +#define MP2973_MFR_VR_MULTI_CONFIG_R2 0x1d +#define MP2973_VID_STEP_SEL_R1 BIT(4) +#define MP2973_IMVP9_EN_R1 BIT(14) +#define MP2973_VID_STEP_SEL_R2 BIT(3) +#define MP2973_IMVP9_EN_R2 BIT(13) + +#define MP2973_MFR_OCP_TOTAL_SET 0x5f +#define MP2973_OCP_TOTAL_CUR_MASK GENMASK(6, 0) +#define MP2973_MFR_OCP_LEVEL_RES BIT(15) + +#define MP2973_MFR_READ_IOUT_PK 0x90 +#define MP2973_MFR_READ_POUT_PK 0x91 + #define MP2975_MAX_PHASE_RAIL1 8 #define MP2975_MAX_PHASE_RAIL2 4 + +#define MP2973_MAX_PHASE_RAIL1 14 +#define MP2973_MAX_PHASE_RAIL2 6 + +#define MP2971_MAX_PHASE_RAIL1 8 +#define MP2971_MAX_PHASE_RAIL2 3 + #define MP2975_PAGE_NUM 2 #define MP2975_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \ PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL) +enum chips { + mp2971, mp2973, mp2975 +}; + +static const int mp2975_max_phases[][MP2975_PAGE_NUM] = { + [mp2975] = { MP2975_MAX_PHASE_RAIL1, MP2975_MAX_PHASE_RAIL2 }, + [mp2973] = { MP2973_MAX_PHASE_RAIL1, MP2973_MAX_PHASE_RAIL2 }, + [mp2971] = { MP2971_MAX_PHASE_RAIL1, MP2971_MAX_PHASE_RAIL2 }, +}; + struct mp2975_data { struct pmbus_driver_info info; + enum chips chip_id; int vout_scale; + int max_phases[MP2975_PAGE_NUM]; int vid_step[MP2975_PAGE_NUM]; int vref[MP2975_PAGE_NUM]; int vref_off[MP2975_PAGE_NUM]; int vout_max[MP2975_PAGE_NUM]; int vout_ov_fixed[MP2975_PAGE_NUM]; - int vout_format[MP2975_PAGE_NUM]; int curr_sense_gain[MP2975_PAGE_NUM]; }; -#define to_mp2975_data(x) container_of(x, struct mp2975_data, info) +static const struct i2c_device_id mp2975_id[] = { + {"mp2971", mp2971}, + {"mp2973", mp2973}, + {"mp2975", mp2975}, + {} +}; -static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg) -{ - switch (reg) { - case PMBUS_VOUT_MODE: - /* - * Enforce VOUT direct format, since device allows to set the - * different formats for the different rails. Conversion from - * VID to direct provided by driver internally, in case it is - * necessary. - */ - return PB_VOUT_MODE_DIRECT; - default: - return -ENODATA; - } -} +MODULE_DEVICE_TABLE(i2c, mp2975_id); + +static const struct regulator_desc __maybe_unused mp2975_reg_desc[] = { + PMBUS_REGULATOR("vout", 0), + PMBUS_REGULATOR("vout", 1), +}; + +#define to_mp2975_data(x) container_of(x, struct mp2975_data, info) static int mp2975_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg, @@ -117,6 +157,41 @@ mp2975_vid2direct(int vrf, int val) return 0; } +#define MAX_LIN_MANTISSA (1023 * 1000) +#define MIN_LIN_MANTISSA (511 * 1000) + +/* Converts a milli-unit DIRECT value to LINEAR11 format */ +static u16 mp2975_data2reg_linear11(s64 val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_LIN_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_LIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff); + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + static int mp2975_read_phase(struct i2c_client *client, struct mp2975_data *data, int page, int phase, u8 reg) @@ -214,6 +289,89 @@ mp2975_read_phases(struct i2c_client *client, struct mp2975_data *data, return ret; } +static int mp2973_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2975_data *data = to_mp2975_data(info); + int ret; + + switch (reg) { + case PMBUS_OT_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(7, 0)); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(7, 0)); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * MP2971 and mp2973 only supports tracking (ovp1) mode. + */ + ret = mp2975_read_word_helper(client, page, phase, + MP2975_MFR_OVP_TH_SET, + GENMASK(2, 0)); + if (ret < 0) + return ret; + + ret = data->vout_max[page] + 50 * (ret + 1); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, reg, + GENMASK(8, 0)); + if (ret < 0) + return ret; + ret = mp2975_vid2direct(info->vrm_version[page], ret); + break; + case PMBUS_VIRT_READ_POUT_MAX: + ret = pmbus_read_word_data(client, page, phase, + MP2973_MFR_READ_POUT_PK); + break; + case PMBUS_VIRT_READ_IOUT_MAX: + ret = pmbus_read_word_data(client, page, phase, + MP2973_MFR_READ_IOUT_PK); + break; + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = mp2975_read_word_helper(client, page, phase, + MP2973_MFR_OCP_TOTAL_SET, + GENMASK(15, 0)); + if (ret < 0) + return ret; + + if (ret & MP2973_MFR_OCP_LEVEL_RES) + ret = 2 * (ret & MP2973_OCP_TOTAL_CUR_MASK); + else + ret = ret & MP2973_OCP_TOTAL_CUR_MASK; + + ret = mp2975_data2reg_linear11(ret * info->phases[page] * 1000); + break; + case PMBUS_UT_WARN_LIMIT: + case PMBUS_UT_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_VOUT_OV_WARN_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_IIN_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_LV_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_UC_FAULT_LIMIT: + case PMBUS_POUT_OP_FAULT_LIMIT: + case PMBUS_POUT_OP_WARN_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + return -ENXIO; + default: + return -ENODATA; + } + + return ret; +} + static int mp2975_read_word_data(struct i2c_client *client, int page, int phase, int reg) { @@ -222,6 +380,11 @@ static int mp2975_read_word_data(struct i2c_client *client, int page, int ret; switch (reg) { + case PMBUS_STATUS_WORD: + /* MP2973 & MP2971 return PGOOD instead of PB_STATUS_POWER_GOOD_N. */ + ret = pmbus_read_word_data(client, page, phase, reg); + ret ^= PB_STATUS_POWER_GOOD_N; + break; case PMBUS_OT_FAULT_LIMIT: ret = mp2975_read_word_helper(client, page, phase, reg, GENMASK(7, 0)); @@ -260,24 +423,6 @@ static int mp2975_read_word_data(struct i2c_client *client, int page, ret = DIV_ROUND_CLOSEST(data->vref[page] * 10 - 50 * (ret + 1) * data->vout_scale, 10); break; - case PMBUS_READ_VOUT: - ret = mp2975_read_word_helper(client, page, phase, reg, - GENMASK(11, 0)); - if (ret < 0) - return ret; - - /* - * READ_VOUT can be provided in VID or direct format. The - * format type is specified by bit 15 of the register - * MP2975_MFR_DC_LOOP_CTRL. The driver enforces VOUT direct - * format, since device allows to set the different formats for - * the different rails and also all VOUT limits registers are - * provided in a direct format. In case format is VID - convert - * to direct. - */ - if (data->vout_format[page] == vid) - ret = mp2975_vid2direct(info->vrm_version[page], ret); - break; case PMBUS_VIRT_READ_POUT_MAX: ret = mp2975_read_word_helper(client, page, phase, MP2975_MFR_READ_POUT_PK, @@ -326,25 +471,25 @@ static int mp2975_read_word_data(struct i2c_client *client, int page, return ret; } -static int mp2975_identify_multiphase_rail2(struct i2c_client *client) +static int mp2975_identify_multiphase_rail2(struct i2c_client *client, + struct mp2975_data *data) { int ret; /* - * Identify multiphase for rail 2 - could be from 0 to 4. + * Identify multiphase for rail 2 - could be from 0 to data->max_phases[1]. * In case phase number is zero – only page zero is supported */ ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); if (ret < 0) return ret; - /* Identify multiphase for rail 2 - could be from 0 to 4. */ ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R2); if (ret < 0) return ret; ret &= GENMASK(2, 0); - return (ret >= 4) ? 4 : ret; + return (ret >= data->max_phases[1]) ? data->max_phases[1] : ret; } static void mp2975_set_phase_rail1(struct pmbus_driver_info *info) @@ -375,7 +520,7 @@ mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data, if (ret < 0) return ret; - /* Identify multiphase for rail 1 - could be from 1 to 8. */ + /* Identify multiphase for rail 1 - could be from 1 to data->max_phases[0]. */ ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R1); if (ret <= 0) return ret; @@ -383,21 +528,23 @@ mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data, info->phases[0] = ret & GENMASK(3, 0); /* - * The device provides a total of 8 PWM pins, and can be configured + * The device provides a total of $n PWM pins, and can be configured * to different phase count applications for rail 1 and rail 2. - * Rail 1 can be set to 8 phases, while rail 2 can only be set to 4 - * phases at most. When rail 1’s phase count is configured as 0, rail + * Rail 1 can be set to $n phases, while rail 2 can be set to less than + * that. When rail 1’s phase count is configured as 0, rail * 1 operates with 1-phase DCM. When rail 2 phase count is configured * as 0, rail 2 is disabled. */ - if (info->phases[0] > MP2975_MAX_PHASE_RAIL1) + if (info->phases[0] > data->max_phases[0]) return -EINVAL; - mp2975_set_phase_rail1(info); - num_phases2 = min(MP2975_MAX_PHASE_RAIL1 - info->phases[0], - MP2975_MAX_PHASE_RAIL2); - if (info->phases[1] && info->phases[1] <= num_phases2) - mp2975_set_phase_rail2(info, num_phases2); + if (data->chip_id == mp2975) { + mp2975_set_phase_rail1(info); + num_phases2 = min(data->max_phases[0] - info->phases[0], + data->max_phases[1]); + if (info->phases[1] && info->phases[1] <= num_phases2) + mp2975_set_phase_rail2(info, num_phases2); + } return 0; } @@ -451,6 +598,35 @@ mp2975_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data, MP2975_MFR_VR_MULTI_CONFIG_R2, 1, MP2975_IMVP9_EN_R2, MP2975_VID_STEP_SEL_R2); + + return ret; +} + +static int +mp2973_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data, + struct pmbus_driver_info *info) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2); + if (ret < 0) + return ret; + + /* Identify VID mode for rail 1. */ + ret = mp2975_identify_vid(client, data, info, + MP2973_MFR_VR_MULTI_CONFIG_R1, 0, + MP2973_IMVP9_EN_R1, MP2973_VID_STEP_SEL_R1); + + if (ret < 0) + return ret; + + /* Identify VID mode for rail 2, if connected. */ + if (info->phases[1]) + ret = mp2975_identify_vid(client, data, info, + MP2973_MFR_VR_MULTI_CONFIG_R2, 1, + MP2973_IMVP9_EN_R2, + MP2973_VID_STEP_SEL_R2); + return ret; } @@ -565,20 +741,37 @@ mp2975_vout_max_get(struct i2c_client *client, struct mp2975_data *data, } static int -mp2975_identify_vout_format(struct i2c_client *client, - struct mp2975_data *data, int page) +mp2975_set_vout_format(struct i2c_client *client, + struct mp2975_data *data, int page) { - int ret; + int ret, i; - ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL); - if (ret < 0) - return ret; - - if (ret & MP2975_VOUT_FORMAT) - data->vout_format[page] = vid; - else - data->vout_format[page] = direct; - return 0; + /* Enable DIRECT VOUT format 1mV/LSB */ + if (data->chip_id == mp2975) { + ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL); + if (ret < 0) + return ret; + if (ret & MP2975_VOUT_FORMAT) { + ret &= ~MP2975_VOUT_FORMAT; + ret = i2c_smbus_write_word_data(client, MP2975_MFR_DC_LOOP_CTRL, ret); + } + } else { + ret = i2c_smbus_read_word_data(client, MP2973_MFR_RESO_SET); + if (ret < 0) + return ret; + i = ret; + + if (page == 0) { + i &= ~MP2973_VOUT_FORMAT_R1; + i |= MP2973_VOUT_FORMAT_DIRECT_R1; + } else { + i &= ~MP2973_VOUT_FORMAT_R2; + i |= MP2973_VOUT_FORMAT_DIRECT_R2; + } + if (i != ret) + ret = i2c_smbus_write_word_data(client, MP2973_MFR_RESO_SET, i); + } + return ret; } static int @@ -600,7 +793,7 @@ mp2975_vout_ov_scale_get(struct i2c_client *client, struct mp2975_data *data, if (ret < 0) return ret; thres_dev = ret & MP2975_PRT_THRES_DIV_OV_EN ? MP2975_PROT_DEV_OV_ON : - MP2975_PROT_DEV_OV_OFF; + MP2975_PROT_DEV_OV_OFF; /* Select the gain of remote sense amplifier. */ ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_SCALE_LOOP); @@ -624,10 +817,10 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client, for (i = 0; i < data->info.pages; i++) { ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i); if (ret < 0) - return ret; + continue; - /* Obtain voltage reference offsets. */ - ret = mp2975_vref_offset_get(client, data, i); + /* Set VOUT format for READ_VOUT command : direct. */ + ret = mp2975_set_vout_format(client, data, i); if (ret < 0) return ret; @@ -636,12 +829,12 @@ mp2975_vout_per_rail_config_get(struct i2c_client *client, if (ret < 0) return ret; - /* - * Get VOUT format for READ_VOUT command : VID or direct. - * Pages on same device can be configured with different - * formats. - */ - ret = mp2975_identify_vout_format(client, data, i); + /* Skip if reading Vref is unsupported */ + if (data->chip_id != mp2975) + continue; + + /* Obtain voltage reference offsets. */ + ret = mp2975_vref_offset_get(client, data, i); if (ret < 0) return ret; @@ -676,8 +869,32 @@ static struct pmbus_driver_info mp2975_info = { PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_PHASE_VIRTUAL, - .read_byte_data = mp2975_read_byte_data, .read_word_data = mp2975_read_word_data, +#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR) + .num_regulators = 1, + .reg_desc = mp2975_reg_desc, +#endif +}; + +static struct pmbus_driver_info mp2973_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT, + .read_word_data = mp2973_read_word_data, +#if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR) + .num_regulators = 1, + .reg_desc = mp2975_reg_desc, +#endif }; static int mp2975_probe(struct i2c_client *client) @@ -691,11 +908,23 @@ static int mp2975_probe(struct i2c_client *client) if (!data) return -ENOMEM; - memcpy(&data->info, &mp2975_info, sizeof(*info)); + if (client->dev.of_node) + data->chip_id = (enum chips)(unsigned long)of_device_get_match_data(&client->dev); + else + data->chip_id = i2c_match_id(mp2975_id, client)->driver_data; + + memcpy(data->max_phases, mp2975_max_phases[data->chip_id], + sizeof(data->max_phases)); + + if (data->chip_id == mp2975) + memcpy(&data->info, &mp2975_info, sizeof(*info)); + else + memcpy(&data->info, &mp2973_info, sizeof(*info)); + info = &data->info; /* Identify multiphase configuration for rail 2. */ - ret = mp2975_identify_multiphase_rail2(client); + ret = mp2975_identify_multiphase_rail2(client, data); if (ret < 0) return ret; @@ -704,6 +933,8 @@ static int mp2975_probe(struct i2c_client *client) data->info.pages = MP2975_PAGE_NUM; data->info.phases[1] = ret; data->info.func[1] = MP2975_RAIL2_FUNC; + if (IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)) + data->info.num_regulators = MP2975_PAGE_NUM; } /* Identify multiphase configuration. */ @@ -711,25 +942,32 @@ static int mp2975_probe(struct i2c_client *client) if (ret) return ret; - /* Identify VID setting per rail. */ - ret = mp2975_identify_rails_vid(client, data, info); - if (ret < 0) - return ret; + if (data->chip_id == mp2975) { + /* Identify VID setting per rail. */ + ret = mp2975_identify_rails_vid(client, data, info); + if (ret < 0) + return ret; - /* Obtain current sense gain of power stage. */ - ret = mp2975_current_sense_gain_get(client, data); - if (ret) - return ret; + /* Obtain current sense gain of power stage. */ + ret = mp2975_current_sense_gain_get(client, data); + if (ret) + return ret; - /* Obtain voltage reference values. */ - ret = mp2975_vref_get(client, data, info); - if (ret) - return ret; + /* Obtain voltage reference values. */ + ret = mp2975_vref_get(client, data, info); + if (ret) + return ret; - /* Obtain vout over-voltage scales. */ - ret = mp2975_vout_ov_scale_get(client, data, info); - if (ret < 0) - return ret; + /* Obtain vout over-voltage scales. */ + ret = mp2975_vout_ov_scale_get(client, data, info); + if (ret < 0) + return ret; + } else { + /* Identify VID setting per rail. */ + ret = mp2973_identify_rails_vid(client, data, info); + if (ret < 0) + return ret; + } /* Obtain offsets, maximum and format for vout. */ ret = mp2975_vout_per_rail_config_get(client, data, info); @@ -739,15 +977,10 @@ static int mp2975_probe(struct i2c_client *client) return pmbus_do_probe(client, info); } -static const struct i2c_device_id mp2975_id[] = { - {"mp2975", 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, mp2975_id); - static const struct of_device_id __maybe_unused mp2975_of_match[] = { - {.compatible = "mps,mp2975"}, + {.compatible = "mps,mp2971", .data = (void *)mp2971}, + {.compatible = "mps,mp2973", .data = (void *)mp2973}, + {.compatible = "mps,mp2975", .data = (void *)mp2975}, {} }; MODULE_DEVICE_TABLE(of, mp2975_of_match); |