summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig5
-rw-r--r--drivers/hwmon/adt7475.c80
2 files changed, 65 insertions, 20 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f9f4365349b2..957171c62324 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -205,11 +205,12 @@ config SENSORS_ADT7473
will be called adt7473.
config SENSORS_ADT7475
- tristate "Analog Devices ADT7473, ADT7475 and ADT7490"
+ tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for the Analog Devices
- ADT7473, ADT7475 and ADT7490 hardware monitoring chips.
+ ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+ chips.
This driver can also be build as a module. If so, the module
will be called adt7475.
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index eac24c1361bc..72c3b754e7b6 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -58,6 +58,8 @@
#define REG_STATUS1 0x41
#define REG_STATUS2 0x42
+#define REG_VID 0x43 /* ADT7476 only */
+
#define REG_VOLTAGE_MIN_BASE 0x44
#define REG_VOLTAGE_MAX_BASE 0x45
@@ -94,6 +96,8 @@
#define REG_VTT_MIN 0x84 /* ADT7490 only */
#define REG_VTT_MAX 0x86 /* ADT7490 only */
+#define VID_VIDSEL 0x80 /* ADT7476 only */
+
#define CONFIG2_ATTN 0x20
#define CONFIG3_SMBALERT 0x01
@@ -142,11 +146,12 @@
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_3(adt7473, adt7475, adt7490);
+I2C_CLIENT_INSMOD_4(adt7473, adt7475, adt7476, adt7490);
static const struct i2c_device_id adt7475_id[] = {
{ "adt7473", adt7473 },
{ "adt7475", adt7475 },
+ { "adt7476", adt7476 },
{ "adt7490", adt7490 },
{ }
};
@@ -1082,7 +1087,6 @@ static struct attribute *pwm2_attrs[] = {
NULL
};
-/* Attributes specific to the ADT7490 */
static struct attribute *in0_attrs[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
@@ -1091,15 +1095,23 @@ static struct attribute *in0_attrs[] = {
NULL
};
-static struct attribute *adt7490_attrs[] = {
+static struct attribute *in3_attrs[] = {
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in4_attrs[] = {
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in4_max.dev_attr.attr,
&sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in5_attrs[] = {
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in5_min.dev_attr.attr,
@@ -1111,7 +1123,9 @@ static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
-static struct attribute_group adt7490_attr_group = { .attrs = adt7490_attrs };
+static struct attribute_group in3_attr_group = { .attrs = in3_attrs };
+static struct attribute_group in4_attr_group = { .attrs = in4_attrs };
+static struct attribute_group in5_attr_group = { .attrs = in5_attrs };
static int adt7475_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
@@ -1134,11 +1148,13 @@ static int adt7475_detect(struct i2c_client *client, int kind,
name = "adt7473";
else if (devid == 0x75 && client->addr == 0x2e)
name = "adt7475";
+ else if (devid == 0x76)
+ name = "adt7476";
else if ((devid2 & 0xfc) == 0x6c)
name = "adt7490";
else {
dev_dbg(&adapter->dev,
- "Couldn't detect an ADT7473/75/90 part at "
+ "Couldn't detect an ADT7473/75/76/90 part at "
"0x%02x\n", (unsigned int)client->addr);
return -ENODEV;
}
@@ -1152,14 +1168,18 @@ static void adt7475_remove_files(struct i2c_client *client,
struct adt7475_data *data)
{
sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
- if (data->has_voltage & 0x39)
- sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
if (data->has_fan4)
sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
if (data->has_pwm2)
sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
if (data->has_voltage & (1 << 0))
sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
+ if (data->has_voltage & (1 << 3))
+ sysfs_remove_group(&client->dev.kobj, &in3_attr_group);
+ if (data->has_voltage & (1 << 4))
+ sysfs_remove_group(&client->dev.kobj, &in4_attr_group);
+ if (data->has_voltage & (1 << 5))
+ sysfs_remove_group(&client->dev.kobj, &in5_attr_group);
}
static int adt7475_probe(struct i2c_client *client,
@@ -1168,6 +1188,7 @@ static int adt7475_probe(struct i2c_client *client,
static const char *names[] = {
[adt7473] = "ADT7473",
[adt7475] = "ADT7475",
+ [adt7476] = "ADT7476",
[adt7490] = "ADT7490",
};
@@ -1184,6 +1205,10 @@ static int adt7475_probe(struct i2c_client *client,
/* Initialize device-specific values */
switch (id->driver_data) {
+ case adt7476:
+ data->has_voltage = 0x0e; /* in1 to in3 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ break;
case adt7490:
data->has_voltage = 0x3e; /* in1 to in5 */
revision = adt7475_read(REG_DEVID2) & 0x03;
@@ -1208,17 +1233,27 @@ static int adt7475_probe(struct i2c_client *client,
if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
data->has_fan4 = 1;
- /* THERM configuration is more complex on the ADT7490, because 2
- different pins (TACH4 and +2.5 Vin) can be used for this function */
+ /* THERM configuration is more complex on the ADT7476 and ADT7490,
+ because 2 different pins (TACH4 and +2.5 Vin) can be used for
+ this function */
if (id->driver_data == adt7490) {
if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
!(config3 & CONFIG3_THERM))
data->has_fan4 = 1;
+ }
+ if (id->driver_data == adt7476 || id->driver_data == adt7490) {
if (!(config3 & CONFIG3_THERM) ||
(data->config4 & CONFIG4_PINFUNC) == 0x1)
data->has_voltage |= (1 << 0); /* in0 */
}
+ /* On the ADT7476, the +12V input pin may instead be used as VID5 */
+ if (id->driver_data == adt7476) {
+ u8 vid = adt7475_read(REG_VID);
+ if (!(vid & VID_VIDSEL))
+ data->has_voltage |= (1 << 4); /* in4 */
+ }
+
/* Voltage attenuators can be bypassed, globally or individually */
config2 = adt7475_read(REG_CONFIG2);
if (config2 & CONFIG2_ATTN) {
@@ -1238,13 +1273,6 @@ static int adt7475_probe(struct i2c_client *client,
if (ret)
goto efree;
- if (id->driver_data == adt7490) {
- ret = sysfs_create_group(&client->dev.kobj,
- &adt7490_attr_group);
- if (ret)
- goto eremove;
- }
-
/* Features that can be disabled individually */
if (data->has_fan4) {
ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
@@ -1261,6 +1289,21 @@ static int adt7475_probe(struct i2c_client *client,
if (ret)
goto eremove;
}
+ if (data->has_voltage & (1 << 3)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 4)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 5)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group);
+ if (ret)
+ goto eremove;
+ }
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -1270,9 +1313,10 @@ static int adt7475_probe(struct i2c_client *client,
dev_info(&client->dev, "%s device, revision %d\n",
names[id->driver_data], revision);
- if ((data->has_voltage & (1 << 0)) || data->has_fan4 || data->has_pwm2)
- dev_info(&client->dev, "Optional features:%s%s%s\n",
+ if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
+ dev_info(&client->dev, "Optional features:%s%s%s%s\n",
(data->has_voltage & (1 << 0)) ? " in0" : "",
+ (data->has_voltage & (1 << 4)) ? " in4" : "",
data->has_fan4 ? " fan4" : "",
data->has_pwm2 ? " pwm2" : "");
if (data->bypass_attn)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 15:50:21 +0100